5
JONATHAN HARRIS CV CORE SKILLS & EXPERIENCE I am 32 years old and have been employed welding for the past 14 years, the majority of time in the Gas, Oil & Petrochemical Industry, recently moving into the Nuclear Power Industry. Work undertaken: V.E.R.T, Outside Squad, Pressure Vessels, Heat Exchangers, Pipework, Structural Steel Work, Aluminium Sheet Metal Fabrication, Hose Welding. Materials used: Carbon Steel, Stainless Steel, Duplex, Super Duplex, Molybdenum, Aluminium, Chrome Moly, 1NI-TIG. ADDRESS: 36 Orchardmead, Royal Wootton Bassett. EMAIL: [email protected] MOBILE: 07557 473647 May 2015 – Present Babcock International Group Instructing REME recruits ages 16-45 on welding knowledge and practical tests. Working with MMA, MIG, FCAW, TIG and OA on mild steel, stainless steel, aluminium, ferrous armour and aluminium armour. SUB CONTRACTING: March 2015 Alvan Blanch Development Company Ltd, Chelworth. Welder/Fabricator/Fitter-Structural welding and sheet metal fabrication of crop & grain driers and various other smaller agricultural systems in mild steel and st/st. Feb 2015 Harelane Engineering Ltd, Gloucester.

JONATHAN HARRIS CV 2016

Embed Size (px)

Citation preview

Page 1: JONATHAN HARRIS CV 2016

JONATHAN HARRIS CV

CORE SKILLS & EXPERIENCE

I am 32 years old and have been employed welding for the past 14 years, the majority of time in the Gas, Oil & Petrochemical Industry, recently moving into the Nuclear Power Industry.

Work undertaken: V.E.R.T, Outside Squad, Pressure Vessels, Heat Exchangers, Pipework, Structural Steel Work, Aluminium Sheet Metal

Fabrication, Hose Welding.

Materials used: Carbon Steel, Stainless Steel, Duplex, Super Duplex, Molybdenum, Aluminium, Chrome Moly, 1NI-TIG.

ADDRESS: 36 Orchardmead, Royal Wootton Bassett.EMAIL: [email protected]: 07557 473647

May 2015 – Present Babcock International GroupInstructing REME recruits ages 16-45 on welding knowledge and practical tests. Working with MMA, MIG, FCAW, TIG and OA on mild steel, stainless steel, aluminium, ferrous armour and aluminium armour.

SUB CONTRACTING:

March 2015 Alvan Blanch Development Company Ltd, Chelworth.Welder/Fabricator/Fitter-Structural welding and sheet metal fabrication of crop & grain driers and various other smaller agricultural systems in mild steel and st/st.

Feb 2015 Harelane Engineering Ltd, Gloucester.Welder/Fabricator-Sheet metal welding and fabrication of various items using TIG & MIG welding disciplines in aluminium, st/st & mild steel, all welds and drawing tolerances inspected.

Jan 2014 - Jan 2015 Doosan Power SystemsCoded Welder- During this years outage season my role as a classified worker has been on V.E.R.T vessel entry repair team at various nuclear power stations. I have also worked on the outside squads doing various welding jobs in position.

Dec 2013 Aish Technolagies, Poole, Dorset

Page 2: JONATHAN HARRIS CV 2016

Coded Welder/Fabricator- Welding and fabrication of Aluminium brackets for MOD and DOD vehicles, all welds to coded standards & inspected.

Nov 2013 AeroFlex Hoses & Engineering, Aviation Business Park West, Hurn.Coded Welder/Fabricator- Welding and fabrication of braided metallic st/st hoses. Oct 2013 Aish Technolagies, Poole, DorsetCoded Welder/Fabricator- Welding and fabrication of Aluminium brackets for MOD and DOD vehicles, all welds to coded standards & inspected.

Aug - Sept 2013 Poole Process Equipment, Poole, Dorset. Coded Welder/Fabricator- Welding and fabrication of shell and tube heat exchangers & pipework with full NDT

Jan - July 2013 Puma Engineering & Construction, Cadnam Hampshire.Coded Welder/Fabricator- Welding and fabrication of pipework with full NDT for Marchwood Power Station & Fawley Refinery.

EMPLOYMENT:2012 - 2013 Heatic, Meggit PLC, Poole, Dorset. Coded Pipe Welder- Welding of PCHE's (Printed Circuit Heat Exchangers) butt welds/components in all postions, using various welding processes. All the above to coded standards

2006 – 2012 Alderley Systems PLC, Wickwar, Gloucestershire.Coded Pipe Welder – Welding of pressure vessel butt welds/components, pipework/butt welds in all positions, structural steel work. All the above to coded standards and also pipe fitting. 2004 – 2006 BMW Group Plant, Oxford.Production Line Welder – Mig welding under frame to strengthen and speed up production process, Slip break Co-ordinator to all welding stations on the line.

2002 – 2004 JGB Engineering Ltd, Gloucester. Tig Welder/Fabricator – Carbon steel, Stainless steel & AluminiumEquipping catering trailers, stainless steel sheet metal shelving, counters and protective surrounds. Domestic fencing, railings, gates, forging finials & decorative work.

2001 – 2002 The Fence Shop, Cairns, Australia. Welding & Fabricating - As part of a year’s working holiday, I undertook three months sole responsibility for work on Cairns Casino Roof, (providing a tropical rain forest under a huge

Page 3: JONATHAN HARRIS CV 2016

dome), welding fencing between roof and dome, constructing bird and crocodile enclosures and internal handrails and fencing in galv. Steel on platforms for public to use.

1999 – 2001 Eastnor Forge, Ledbury. Herefords. Blacksmithing work experience – Forged and welded mild steel & stainless steel, gates, handrails, stair rods etc.

ADDITIONAL SKILLS/ATTRIBUTESI have always enjoyed welding and completing the task to a high standard I can be proud of. I am very enthusiastic, always giving 100%. Enjoying new challenges and consider myself to be a quick learner.

EDUCATIONThe Welding Institute, Cambridge, 2002. BS 4872 - 2” 6G fixed. GTAW root & Cap (Stainless Steel)Hereford College of Technology, 1999 - 2001. City & Guilds 3267 - MMA, TIG, MIG & GAS.Burford School & Community College, 1994 -1999. English, Maths, Science, Geography, History, PE & Art.Southrop C of E Primary School, 1988 - 1994.

QUALIFICATIONSSafety Passport ECITBHSE Classified WorkerCTC Nuclear Vetting (5 yearly)CSCS Card HolderAttended and completed various modules Lv4 Diploma (High Integrity Welder)ASME IX/EN 287 - 6” 6G fixed. GTAW root/MMA fill & cap (carbon steel)ASME IX/EN 287 - 16” 1G rolled. GTAW root/SAW fill & cap (carbon steel)AWS D1.1/EN 287 - 10mm plate fill. FCAW root, fill & cap (Carbon steel)AWS D1.1/EN 287 - 16” 1G rolled. GTAW root/FCAW fill & cap (Duplex)ASME IX/EN 287 - 6” 6G fixed. GTAW root/MMA fill & cap (Duplex)ASME IX/EN 287 - 16” 1G rolled. GTAW root/SAW fill & cap (Duplex)ASME IX/EN 287 - 2” 6G fixed. GTAW root, fill & cap (Super Duplex)ASME IX/EN 287 - 6” 6G fixed. GTAW root/MMA fill & cap (Stainless Steel)ASME IX/EN 287 - 2” 6G fixed. GTAW root, fill & cap (6Moly) Molybdenum.

INTERESTSKorfball, Scuba Diving & Clay pigeon shooting.

Page 4: JONATHAN HARRIS CV 2016