Upload
kristin-wolden
View
215
Download
0
Tags:
Embed Size (px)
Citation preview
Jim Maslowski
PDC
2008
Aseptic
Filling
Single Use Disposable
Components
Single-Use Fill Lines - The Components & Economies
Disposable Single Use Systems
Jim Maslowski
PDC
2008
Single Use Disposable
Components
Aseptic
Filling The Economies Of The PDC Single-Use Fill Line
One Set Of PDC Fill Lines Will Fill Your Entire Batch
Set-up Time To Fill Your Batch Is Less Than 1 Hour
Turn Around Time Is Minimal
CIP SIP Cleaning Is Eliminated
Disposal Cost Per Batch Is Minimal – One Set Of PDC Fill Lines Is About 25 Feet Of Tubing, Compared To Manifold Filling That Leaves Thousands Of Feet Of Plastic Tubing For Disposal
Lost Product, Left In The Disposable Plastic Tubing Is Minimal
Disposable Single Use Systems
Jim Maslowski
PDC
2008
Single Use Disposable
Components
Aseptic
Filling Single-Use Fill Lines For PDC Aseptic Fillers
Dual Fill Line With Integral Disposable Filter At The Product Supply Connection
Individual Fill Line With Aseptic Connector At the Product Supply Connection
Individual Fill Line With Sanitary Connector At the Product Supply Connection
Disposable Single Use Systems
Jim Maslowski
PDC
2008
Single Use Disposable
Components
Aseptic
Filling Components Of The Disposable Fill Line
Aseptic Connector At The Supply Connection
Coriolis Flow Meter Liner
Tubing Of Customer’s Choice Fill Nozzle With Sterility Cover
Disposable Single Use Systems
Jim Maslowski
PDC
2008
Single Use Disposable
Components
Aseptic
Filling High Flow 1/2” Disposable Nozzle
Enlarged View Of Sterility Cover And Nozzle
• 20 Liter Per Minute Flow Rate
• ADCF Nozzles Available
• Internal Screen Inhibits Dripping
The Fill Line Is Installed Into The Aseptic Filler. The Nozzle Is Positioned In The Class 100 Fill Zone. The Sterility Cover Is Removed. The Nozzle Remains Sterile. The Internal Molded Screen Helps Eliminate Dripping After The Fill.
Disposable Single Use Systems
Jim Maslowski
PDC
2008
Single Use Disposable
Components
Aseptic
Filling Small Volume 1/4” Disposable Nozzle
Enlarged View Of Sterility Cover And Nozzle
• 3 Liter Per Minute Flow Rate
• ADCF Nozzles Available
• Tip Design Inhibits Dripping
The Fill Line Is Installed Into The Aseptic Filler. The Nozzle Is Positioned In The Class 100 Fill Zone. The Sterility Cover Is Removed. The Nozzle Remains Sterile. The Tip Design Helps Eliminate Dripping After The Fill.
Nozzle Tip Viewed From The End