Jennmar Australia

Clip Up Service Hanger

Description: Pipe Line 3 hook hanger to suit 110mm poly with added 62mm hook and patented safety latch for easy “Clip Up” operation. (minsup clips)

Available Versions • 8mm chain with 52mm ID ring to suit 47mm friction lock.• Standard 6mm steel, designed to be “D” shackled to existing ground

support• Pump Line, with added 15mm saddle designed for moving pump lines.• Pump Line, with added 8inch poly hanger, design for large pumps.

Destructive testing providing results in excess of 3 tonnes

Test Special

Test Date: 06/02/2015Operator: JASONRep: ANTHONY DShift: DAYProduct: JCLIPUPPLR52Test Type: TENSILE

Test: 06/02/15Product: JCLIPUPPLR52Ultimate, kg: 3039.5Ultimate, N: 29800

The safest, most efficient and professional service hanger available.

The Clip Up poly hanging system "Every good manager understands the importance of good housekeeping. When you walk into a mine that is a mess, you can guarantee that the productivities are low. Conversely, when you walk into an orderly mine, you get that satisfaction that the miners are paying attention to the details. You know it is more productive, and safer. The Clip-Up is a perfect example of a safe and simple way to improve your operation, and instill pride in the workplace. No more tedious tracing of cables or pipes. A much reduced risk of opening or closing the wrong valve or switch. All tucked up neatly out of the way from mobile equipment. I strongly recommend using Clip-Up’s for your piping and cabling needs underground.“ Tim Arnold, VP Operations Nevada Copper

CountryDistribution locations