JDSU Catalog 2007( All Products)

24/7 Technical Assistance Center (TAC) Support This extends TAC services typically available only during normal business hours to 24 hours a day, 7 days a week. Pricing is based on the size of the installed base.

AM 4/5/44/48 TIMS A compact, user-friendly, yet powerful handheld analog transmission test set.

AM5eXT-200 Wideband Transmission Test Set Specifically engineered for peak performance for use in the field and in the lab. Offers a full range of transmission impairment measurements and a highly versatile signal generator in a single, compact, portable instrument.

ANT-10G Advanced Network Tester Test solution for PDH, DSn, ATM, SDH, and SONET up to STM-64/OC-192 including jitter and wander analysis.

ANT-20 Advanced Network Tester The leading tester for advanced digital networks. Packed with power and features, the ANT-20 is a powerful all-rounder for SONET and SDH backbone testing.

ANT-20se Advanced Network Tester Test solution for PDH, DSn, ATM, SDH, and SONET up to STM-16/OC-48 including jitter and wander analysis.

ANT-5 SDH Access Tester Installation and commissioning solution for SDH, SONET, PDH, and ATM access networks with line rate testing from 1.544 Mb/s to 2.5 Gb/s

ATM Converter Family A modular converter system based on a variety of freely selectable ATM, Utopia, and customized interfaces that replace the well-known ATM Utopia Converters UC-155, UC-25, LC-25, and LC-LVSD.

Benchtop Broadband Source The high power JDSU Instrumentation Broadband Sources emit a higher optical output than conventional EELEDs and operate over the EDFA (1525-1610 nm) window.

Benchtop Erbium-Doped Fiber Amplifier JDSU Instrumentation Erbium-Doped Amplifiers (EDFAs) amplify optical signals across the EDFA window (1528-1610 nm).

Benchtop/Rackmount Programmable Switches The JDSU SB, SC, and SCG series of fiberoptic switches are programmable benchtop/rack-mount switches that can be controlled using the front panel keys and a numeric pad or via GPIB and serial RS232 interface.

BERTScope S 12500A and 7500A Signal Integrity Analyzers The BERTScope S family of signal integrity analyzers addresses the need for today's receiver compliance testing and advanced analysis.

Blended Learning Take advantage of both on-site training and Virtual Classroom to maximize the learning experience.

Calibration Plan Manager Provides monthly reports detailing the status of your instruments in the calibration program.

CD Plug-in Module for T-BERD/MTS Platforms Fast and cost-effective Chromatic Dispersion (CD) testing for Metro DWDM deployment.

Certified Equipment Program JDSU Certified Equipment Program for reliable used equipment.

Classified Services JDSU is also pleased to offer expert services provided by fully cleared personnel. We have the resources to perform a wide array of classified tasks and consulting related to the JDSU product portfolio and the telecommunications industry in general.

CLI-1750/ LST-1700 Home Wiring Test System Combination leakage and signal level meter and home wiring test kit.

CLI-950, CLI-1450, and CLI-1750 Cable Leakage Meters

Combination leakage and signal level meters.

CN-100 Network Performance Tester Dual media multi-line rate Ethernet and ATM interface modules provide a flexible platform for testing Ethernet and ATM. Full line traffic generation, monitoring, capture, internetwork testing, data integrity testing, real-time quality of service, and bit-error rate testing on all interface modules.

Coax Mapper This handy tester is designed for CATV and security camera connection and installation. It tests multi-run coax cables terminated with F-connectors from a central source.

CT-6000 Broadband Test Unit Centralized test system that remotely monitors and tests DS1, DS3, E1, STS-1, STS-3c/OC-3c, STS-12c/OC-12c, STS-48c/OC-48c, STS-192c/OC-192c, VC-4, VC-4-4c, VC-4-16c, and VC-4-64c circuits from a broadband digital crossconnect or from an optical test access device.

CT-650 CENTEST Wideband Test Unit Centralized test system providing multiple simultaneous tests from a single equipment shelf for DS3, DS1, and DS0 service rates. Also supports GSM and VF testing.

DA-3200 Data Network Analyzer Easy-to-use troubleshooting solution for today's IP-based services.

DA-3400 Data Network Analyzer Easy-to-use troubleshooting solution for today's IP-based services across Ethernet, WAN, and ATM networks.

DA-3600A Data Network Analyzer Most flexible and powerful data network analyzer available with the performance to meet the demanding needs of today's converged networks.

Distributed Test Manager 32 Allocate valuable testing and troubleshooting resources more effectively via remote PC access to JDSU communications analyzers.

DSAM Digital Service Activation Meter Lightweight, durable, handheld meter for DOCSIS/EuroDOCSIS cable modem installation. The DSAM enables cable installers, regardless of skill or experience levels, to increase the speed and efficiency in deploying high-speed data sevices.

DSAM-6000 Network Maintenance Sweep Meter with DOCSIS / EuroDOCSIS Capabilities The DSAM-6000 combines triple play services testing, forward and return path maintenance, and Stealth Sweep™ Technology to deliver award winning performance. The DSAM-6000 is a Wavetek™ Series Field Meter.

DTS-200 MPEG-2 Field Instrument Provides remote visibility into MPEG-2 streams to perform test applications.

DTS-330 Digital Broadcast Test Platform Digital broadcast test platform performing MPEG-2 ATSC and DVB transport stream analysis, simulation, and generation.

DTS-A: The DTS-330 Analyzer Configuration This transport stream analyzer helps solve configuration, interworking, and performance issues by isolating and diagnosing problems in the transport stream.

DTS-G: The DTS-330 Generator Configuration This transport stream generator captures and plays MPEG-2 transport streams for equipment validation and testing.

DTS-M: The DTS-330 Multiplexer Configuration This transport stream multiplexer allows users to create complex MPEG-2 transport streams for testing digital televisions or set-top boxes, enabling developers to quickly and efficiently bring their products to the marketplace.

EasyTrace LAN/WAN Analyzer The smallest and most compact tool for the installation, commissioning, maintenance, and troubleshooting of voice/data communications and LAN/WAN interconnections and systems.

Education Services Increase workforce knowledge and skills with JDSU's Education Services. Formats include public and on-site courses as well as our E-learning Virtual Classroom.

EFL-10 Fault Locator Bridge For fast and accurate fault location and quality testing of telecommunications cables.

ELQ2-DT xDSL Line Qualifier For prequalification, installation, and maintenance of balanced copper pairs.

Environmental Test Systems (OCETS Series) JDSU Environmental Test Systems are integrated automated test facilities intended for long-term reliability testing of optical components while subjected to environmental stress conditions in a temperature/humidity chamber.

EST-120, EST-125, EDT-130, and EDT-135 E1 and Data Testers Scalable solutions for E1 and data circuits as well as service testing.

ETDR-10 Cable Fault Locator For fast and accurate discontinuity location of balanced telecommunications cables.

ETT-10 Telephone and Exchange Tester For testing subscriber lines, exchanges, and PABXs. Also tests subscriber telephone sets and other terminal equipment such as fax machines and meter pulse counters.

Extended Warranty Eliminates unexpected expenses associated with repairs by extending coverage beyond the standard warranty. Warranties can be prorated to align warranty expiration and simplify renewal.

Factory Calibration Services Provides ISO-certified calibration. Factory calibration services install ECNs.

Factory Repair Either flat-rate pricing or time-and-materials pricing is available. Factory repair services install ECNs.

Falco-300 Falco is the industry's first monitor test platform designed to offer access to SDH/SONET and Gigabit Ethernet backbone by traditional WAN and LAN equipment.

FDM-100 Field Data Management Software A client software application that supports the DSAM family of test instruments.

FI-10 and FI-11 Optical Fiber Identifier Identify optical fibers by detecting the optical signals being transmitted through a singlemode fiber.

Fiber Characterization Service A complete end-to-end fiber characterization test and consulting service for carriers and enterprises measuring overall fiber quality.

FiberCon 10/100/1000 Integrates terminal equipment into fiber optic data networks without the need for configuration adjustments.

FIREBERD 6000 Communications Analyzer Advanced testing capabilities for today's networks.

FIREBERD 8000 TestPad datacom analysis module with a variety of interfaces that support installation, troubleshooting and maintenance of network elements and circuits

Flexible Small Channel Count Switch Module The SQ Series fiberoptic switch is ideal for applications requiring high optical performance in latching or non-latching applications.

Fortissimo/Allegro Call Generators and QoS Analyzers The world's smallest, full-featured network load generation product for testing and qualifying voice and packet (VoP) networks based on POTS, PBX, ISDN, GSM, soft switches, and media gateways.

FST-2000 TestPad (Version 6 UIM) The latest TestPad platform development providing process improvement and back-office integration.

FST-2207 TestPad Handheld PCS-1900 GSM test set.

FST-2209 TestPad Handheld DS3, DS1, and DS0 test set with touch-screen interface.

FST-2230 TestPad Expert 2M WAN service testing and troubleshooting in a handheld instrument.

FST-2310 TestPad The industry's first DS1 to OC-48 handheld, battery-operated, and integrated SONET test set.

FST-2510A TestPad The world's lightest and easiest-to-use DS1 to OC-192/STM-64 tester.

FST-2802 TestPad A handheld gigabit Ethernet test instrument designed to meet the needs of service providers offering various Ethernet and Fibre Channel services.

High Port Asymmetric Optical Switch Tray (HPA) HPA is ideal for test and network monitoring applications, it has been designed for use in core, access and PON networks.

HST-3000 Handheld Services Tester In one lightweight, robust, battery operated tester, the HST-3000 offers more testing power than any other handheld tester on the market. Its scalable, modular design cost-effectively addresses today's needs and allows upgrade later in the field to meet emerging requirements, through plug-in hardware modules and software options.

IBT-100, IBT-200, and IBT-300 ISDN Testers ISDN, BRA, PRA, and BRA/PRA testers for the installation and maintenance of basic and primary rate accesses, PBXs, and private PBX networks.

IBT-5 ISDN BRA Tester ISDN S/T tester for the installation and commissioning of ISDN accesses and equipment.

IL/ORL Plug-In Module for T-BERD/MTS Platforms The OFI Multifunction Loss Test Module provides automated bi-directional loss test set for continuity check, fiber loss, return loss and length for transport, metro, access, and FTTx/PON networks.

Instrument Tracking and Management JDSU will inventory the customer's equipment, manage the information in a database, and provide information regarding when the equipment is due for calibration or an upgrade. Recommendations are based on the customer's applications.

Iris-300 High density non blocking timeslot matrix switch designed to work jointly with monitoring equipment such as Protocol Analyzers or Probes. Any timeslot of the incoming E1 signal can be switched to any of the output timeslot available. Broadcasting An incoming timeslot can also be duplicated onto several outgoing timeslots.

ISDNpartner Expert System ISDN Expert System dedicated to the troubleshooting and maintenance of ISDN installations including access, equipment, and private networks.

ISS-5116 Input Selector Switch The ISS-5116 Input Selector Switch is designed to support the RSAM-5600. The ISS-5116 is a 16x1 5-1000MHz, 75 Ohm, RF input switch that is directly controlled by the RSAM-5600 to provide the ability to monitor up 128 different testpoints.

IVT-600 Tri-Porter Multifunctional, total solution for IPTV, VoIP, home networking, whole-home DVR and residential gateway installation

LANchecker 100 An easy-to-use, handheld unit for active LAN testing.

LanRoamerPRO™ Tester/Analyzer This high-performance length measurement CAT 5/6 tester identifies multiple faults clearly without interpretation for fast results; clear wiremapping form displayed on 2-line, 16-character LCD display; and measures cable length.

LanRoamer™ Tester/Analyzer Offers price/performance level for verification of wiring faults and configurations on all your data cable.

LanScaper™ Network Tester The LanScaper™, a Physical Layer Network Management Device, combines the functions of a high-end cable tester and length measurement device with the capability to monitor and correct network problems connected with the physical layer and link conditions of the network.

Large Channel Count Switch Module JDSU modular 1xN controllable switches are designed to connect a single optical channel to any of N channels.

Latch-Test™ A combination advanced tone generator and continuity tester for sensors, switches, and circuits used in security/alarm systems

Lil' Buttie™ Pro Test Set Telephone test set with LCD readout and voltmeter

Lil' Buttie™ Test Set Hands-free test set with headset. At half the size and half the weight, it establishes a new standard in field test sets.

LinkView Classic Network Analyzer An easy-to-use software-based LAN analyzer for monitoring and troubleshooting Ethernet and Token Ring Networks. Physical layer troubleshooting capability is available using the Advanced Ethernet Adapter.

MANTA High-Capacity Digital Cross Connect A digital multiplexer with rack-mounted timeslots designed for acquisition purposes.

MAP Broadband Source The MAP Broadband Source cassette combines the optical performance of the JDSU BBS Series benchtop instrument with the flexibility and modularity of the MAP.

MAP DFB Laser The MAP Distributed Feedback (DFB) Laser Cassette is an excellent source for DWDM system testing. A combination of DFB lasers may be used to create an ITU grid in which optical frequency represented by a DFB laser corresponds to the transmitter in the optical network.

MAP DFB Laser - Analog Modulation The MAP DFB Laser Cassette with Analog Modulation is intended for application in analog amplitude modulation.

MAP Erbium-Doped Fiber Amplifier The MAP EDFA (erbium doped fiber amplifier) cassette combines the optical performance of the JDSU OAB benchtop portfolio, with the flexibility and modularity of the MAP.

MAP Fabry-Perot Laser The JDSU MAP Fabry-Perot Laser Cassette is designed to produce a stable light source at desired wavelength.

MAP Large Channel Count Switch The MAP Stepper-Motor Based Switch Cassettes are bidirectional and allow the connection of a common port to any number of channels up to 50.

MAP Light Emitting Diode Source The JDSU MAP LED Source Cassette is a high-power LED (Light Emitting Diode) based light source with variable output power.

MAP Polarization Controller The MAP Polarization Controller Cassette provides an efficient and precise way of creating any state of polarization.

MAP Power Meter The MAP Power Meter Cassette makes use of a 3 mm InGaAs detector that can measure from 10 to - 80 dBm over the wavelength range of 800 – 1650 nm.

MAP Precision Attenuator The MAP Precision Attenuator is a high-resolution, wide wavelength-range attenuator ideal for use in applications such as analog systems and high bit-rate digital systems.

MAP RF Switch The MAP RF switch cassette is a 50 ohm coaxial switch for routing RF and microwave signals at frequencies up to 26.5 GHz.

MAP Small Channel Count Switch The JDSU Multiple Application Platform (MAP) Prism Based Switch Cassettes are low-cost switch cassettes that can accommodate a number of switches with varying channel counts and latching modes.

MAP Tunable Grating Filter The MAP TB3 Tunable Grating Filter is a tunable bandpass filter that offers continuous wavelength tuning from 1420 to 1630 nm.

MAP Tunable Laser The MAP Tunable Laser Cassette is an external cavity tunable diode laser that offers exceptional speed, accuracy and flexibility at a competitive price, making it the ideal source for advanced fiberoptic systems and component testing.

MAP Utility The MAP Utility Cassette is designed to simplify the mechanical integration of passive optical components for test sets.

MAP Variable Backreflector The JDSU MAP Variable Backreflector Cassette provides precise levels of return loss to transmitters, which allows measurements of system sensitivity or system degradation as a function of backreflection.

MS-1200, MS-1300, and MS-1400 MicroStealth Signal Level Meters A full line of analog and digital testing signal level meters designed for installers who are troubleshooting advanced networks.

MTS-6000 Compact Optical Test Platform The MTS-6000 is a compact and lightweight test platform designed for the installation and maintenance of fiber networks. It can perform full fiber characterization measurements.

MTS-8000 Scalable Optical Test Platform Completely scalable optical test platform for optical network installation, commissioning, maintenance, and troubleshooting.

MTS-8000 Tester (Transport Module) The MTS-8000 Transport module enables service providers to rapidly, reliably and cost-effectively deploy Transmission services in one convenient package. An important complement to the existing MTS-8000 product line, the module supports 10GigE, GigE, SDH and PDH testing in the industry's most innovative test solution.

Multichannel Backreflection Meter (RX Series) The JDSU Multichannel Backreflection Meters perform a wide range of single-mode or multimode return loss (RL) and loss measurement functions, ranging from single component testing to automated multifiber testing.

Multiple Application Platform (MAP) Flexible instrumentation platform for optical or electro-optical test and measurement applications

NetAnalyst Test Management Software Client/server test management OSS software that controls remote test units for testing your entire network. Enables test automation and provides a secure, managed platform for centralized testing of private line and data services.

NetComplete Service Assurance for Cable VoIP JDSU's NetComplete cable voice service assurance solution is an integrated comprehensive system for managing voice services over a packet based cable network. In addition, it provides unparelleled visibilty into the end user experience.

NetComplete Service Assurance for Metro EthernetNetComplete Metro Ethernet Service Assurance solution eliminates the provisioning verification and troubleshooting challenges facing service providers today.

NetComplete Service Assurance for Telco VoIP NetComplete VoIP Service Assurance Solution delivers an end-to-end solution for service turn-up verification, fault isolation and troubleshooting, performance management, and capacity planning.

NetComplete Service Assurance for Video Service Assurance Solutions provide best-in-class business solutions to the service provider concerned with effectively managing the next generation network and triple play services life cycle.

NetComplete Service Assurance for xDSL NetComplete Solution delivers a comprehensive end-to-end service system for commissioning, troubleshooting and managing Digital Subscriber Line (xDSL) services. Targeted at service providers who need to support the life cycle of xDSL Services (Pre-Qualification, Turn-Up/ commissioning, Spectrum Management, Narrowband and Wideband Copper test and xDSL Service Test)

NetOptimize Operations Support System Operations Support System (OSS) that provides data collection, processing, analysis, and reporting to support capacity planning, inventory discovery, and performance management applications.

Network Measurement Services Network measurement services and consulting using the industry's best practices to simplify processess, maximize personnel efficiency, and improve profitability.

Network Synchronization Equipment Symmetricom designs, manufactures, and markets atomic clocks as well as network synchronization and timing solutions used in wireline and wireless telecommunications networks; space, defense, and avionics systems; and enterprise IT networks.

Nexus8610 Traffic Simulation System The Nexus8610 Traffic Simulation System performs comprehensive core network testing on the network elements in wireline, wireless/mobile, and NGN/VoIP networks.

Nexus8620 Roaming Test System The Nexus8620 Roaming Test System provides comprehensive and automated testing capabilities to monitor the quality of service (QoS) of GSM and GRPS mobile networks.

NexusNETVIEW Signalling Surveillance System The NexusNETVIEW Signalling Surveillance System provides vendor-independent end-to-end visibility of the signaling traffic in wireline, wireless/mobile, and NGN/VoIP networks.

OAM-200 Optical Amplifier Module The simple, easy-to-use solution for amplifying test signals.

OCK-10 Optical Cleaning Kit for SMART Optical Handhelds JDSU OCK-10 optical cleaning kit for connector cleaning and maintenance designed for the JDSU SMART optical handhelds range.

OFI-2000 Multifunction Loss Test Set For the installation and maintenance of fiber optic networks.

OFM-500 Optical Fiber Mapping Software A complete software application for the design, documentation, and maintenance of fiber optic outside plant facilities. Part of the ONMS family.

OFS-100 Optical FiberTrace Software PC software for OTDR trace analysis.

OFS-200 Optical Fiber Cable Software Software for the MTS tester family

OFS-310 Optical Fiber Budget Software for the OFI-2000 The easiest way to generate bi-directional insertion loss reports.

OFS-355 SMART Optical Reporting Software SMART Optical Software to speed up your test results reporting in the field!

OIM-400 Optical Inspection Miscroscope Handheld inspection microscopes that utilizes a white LED for coaxial illumination.

OLA-54 and OLA-55 SMART Optical Level Attenuators Future-proof, improved instruments for system testing, installation, maintenance, and production of singlemode fibers. These instruments are 40 Gbps ready due to low Differential Group Delay (DGD).

OLA-55M SMART Motorized Optical Level Attenuator A variable optical attenuator with an automatic level controller mode in a single, rugged, handheld instrument.

OLP-5, OLP-6, and OLP-8 Pocket-Sized Optical Power Meters Optical handheld instruments designed for optical system installation, maintenance, and troubleshooting applications.

OLP-55 and OLP-57 SMART Optical Power MetersDesigned for installing, testing, and maintaining singlemode and multimode networks and cables. The SMART Optical Power Meters define a new industry standard with a unique built-in auto-zeroing function for auto dark current compensation.

OLS-5 Optical LED Source and OLS-6 Optical Laser Source For installing and maintaining multimode (OLS-5) datacomm networks and LANs as well as for maintaining and repairing singlemode (OLS-6) fibers in communications, telecommunications, and CATV-multimedia networks.

OLS-55 and OLS-56 SMART Optical Laser SourcesDesigned to suit every application from PON to Gigabit Ethernet. These handheld laser sources offer the flexibility to test, install, and maintain singlemode and multimode fiber optic networks.

OLT-55 SMART Optical Loss Test Set The OLT-55 SMART Optical Loss Test Set is a universal instrument for singlemode fibers from lab through to installation, maintenance and troubleshooting.

OMK-55 SMART Optical Test Kits Future proof SMART Optical Test Kit, can contain an optical power meter, an optical light source, an optical attenuator and accessories in a carrying case.

OMK-5-6-7 Pocket Sized Optical Test Kits JDSU Optical test kits including a light source (OLS), a power meter (OLP), and accessories.

On-site Calibration for Communications Test Equipment ISO-9001 and 9002 calibration service for JDSU and OEM equipment including electrical, optical and data/IP test instruments

On-Site Testing Services Fiber characterization, fiber qualification, functional testing, burn-in testing, and jitter/wander measurements are some of the tests that we perform for customers. JSDU, a manufacturer of communication test equipment, provides third-party independent testing with expertise, short lead-times, and excellent reports for a competitive price.

On-Site Training Provides training for eight students at a customer-specified location. Courses cover technology and applications for the specified technology or product.

ONT 10Gig Ethernet LAN/WAN The 10GigE solution addresses the need of R&D and SVT labs to test boards and systems with combined transport technology and Ethernet services. It provides testing functionality for 10GigE LAN and WAN and is OTU LAN ready.

ONT 40/43G The ONT-40/43G solution supports testing and verification for new high-speed network elements up to 43 Gb/s. It allows the evaluation of the physical layer, including jitter and wander, at bit rates of 40/43G with unframed signal and framed

signals for SDH/SONET/OTN. Function and conformance testing are also provided for the transport layer.

ONT DSn/PDH Single/Dual Port The DSn/PDH solution addresses the need of R&D and SVT labs to test boards and systems with combined transport technology and DSn/PDH services. It provides testing functionality for T-carrier and E-carrier signals including multiplex chains.

ONT Ethernet Addresses the need for evaluating fully interworking New Generation SONET/SDH with Ethernet services at electrical and optical interfaces.

ONT G.709 OTN Provides full functionality for system verification of G.709 equipment, including extensive FEC testing.

ONT High-Accuracy Jitter/Wander Enables jitter and wander generation and analysis of 155 Mb/s to 10 Gb/s SONET/SDH, 2.7 Gp/s and 10.7 Gb/s OTN (G.709) signals according to ITU-T jitter/wander standards O.172/O.173.

ONT Multi-Channel New level of speed and coverage with Multi-Port and Multi-Channel testing for manufacturer and operator labs.

ONT NewGen EoS The industry's first fully functional Ethernet over SONET/SDH test solution, including Virtual Concatenation (VC) with LCAS emulation, Generic Frame Procedure (GFP), and Ethernet MAC frames.

ONT Optical Network Tester Family Highly configurable, multi-application and multi-port platform for system verification and acceptance testing.

ONT PoS Using the PoS application, JDSU's ONT-50 accesses the IP world.

ONT SONET/SDH SONET/SDH modules from JDSU offer the highest degree of flexibility when looking for multi-port applications.

ONT-30 Optical Network Tester Allows for high-speed installation of high-speed optical networks as well as simultaneous optical and digital testing of DWDM networks.

ONT-50 Optical Network Tester Provides optical and digital transport testing in one portable mainframe. It is optimized for early adaptation of new technologies including OTN G.709 and Ethernet over SONET/SDH.

ONT-506 Optical Network Tester ONT-506 Provides multi-channel test and multi-port configuration capabilities. It is the answer to the manufacturer's development and system verification as well as the answer to the service provider's acceptance testing. Thus it represents the most complete transport technology testing solution.

ONT-512 Optical Network Tester ONT-512 Provides multi-channel test and multi-port configuration capabilities. It is the answer to the manufacturer's development and system verification. Thus it represents the most complete transport technology testing solution.

OPERA Voice Quality Analyzer The OPERA Voice/Audio Quality Analyzer represents the latest developments to objectively evaluate and assure the quality of compressed voice and wide-band audio signals, based on modeling the human ear.

Optical Accessories A complete line of accessories including cases, bags, power supplies, adapters, complementary software, visual fault locators, fiber identifiers, cleaning kits, and fiber inspection microscopes.

Optical Handheld Family of Test Instruments A family of future-proof optical handheld instruments that are ready for the industry's newest applications including FTTx, CWDM, DWDM, 40 Gbps, Ethernet and Gigabit Ethernet.

Optical Level Attenuators JDSU offers a complete line of optical level attenuators for every field application.

Optical Light Sources JDSU offers a complete line of optical light sources for every field application.

Optical Network Management System (ONMS) The optical network performance and monitoring system that keeps the network on target 24 hours a day.

Optical Power Meters JDSU offers a complete line of optical power meters for every field application.

Optical Spectrum Analyzer (OSA) The OSA product line is a line of high-precision optical spectrum analyzers designed for dense and coarse WDM applications. They offer improved OSNR ranges and accurate DWDM network measurements with high channel counts and tight channel spacing over the full wavelength range of 1250 to 1650 nm.

Optical Switch Tray (OST) Multimode The Polatis OST family of multimode optical switch trays utilizes the DirectLight beam-steering technology, delivering high performance in a compact, fully non-blocking, multimode product.

Optical Switch Tray (OST) Single Mode The Polatis OST family is a range of fully non-blocking optical switch units designed for 19" ANSI and ETSI rack equipment practice.

Optical Test Kits A complete line of optical test kits that contain all of the instruments and accessories necessary to perform professional-grade power and loss testing in the field.

ORL-55 SMART Optical Return Loss Meter The ORL-55 is a high performance instrument for field, production and lab use. This instrument can be used in three different modes as a return loss meter, optical power and loss meter and a laser source.

OTDR Plug-In Modules for T-BERD/MTS Platforms Wide product line of optical modules offering full coverage of OTDR testing applications. For testing all types of networks from short haul to very long haul.

OTS-55 Optical Talk Set The OTS-55 Optical Talk Set provides clear digital voice transmission over a single

fiber. Hands free operation makes communication even more convenient for the technician by using either a headset or the “speaker phone” mode.

OTU-8000 Optical Test Unit for the ONMS JDSU OTU-8000 Optical Test Unit for the ONMS Rack-based optical test unit for RFTS (Remote Fiber Test System)

Outsourced Calibration Services A complete solution for all of your calibration needs.

OVF-1 Visual Fault Locator For fault location in fiber optics networks.

OVIP-250/OVIP-400 Video Inspection Probes For the inspection of fiber optic terminations.

PA-20, PA-25, PF-30, PFA-30, and PFA-35 E1 and Data Testers A full product line of field service testers for installing, commissioning, and maintaining E1 and data circuits as well as associated services.

PathTrak Return Path Monitoring System Simultaneous return path monitoring, live remote client spectrum views, constant performance history, and remote spectrum views on field meters

PathTrak WebView Server PathTrak WebView™ software allows remote access to the live spectrum analyzer, to performance history reports and automates the node certification process allowing operators to prioritize their workforce more efficiently. WebView is a PathTrak™ HFC Test & Monitoring Solution.

PCM-40 PCM Channel Analyzer PCM channel analyzer for CODEC and line card tests.

PCS-40 Channel Selector By interconnecting the PCS-40 PCM Channel Selector with the PCM-40 PCM Channel Analyzer and the analog terminal of a PCM multiplex unit, a test system is established to automatically and rapidly measure a wide range of parameters of the device under test.

PMD Plug-In Modules for T-BERD/MTS PlatformsProvide fast and cost-effective polarization mode dispersion (PMD) testing for

Metro DWDM network testing.

Product Support Services Services performed after the customer purchases JDSU test instruments. Designed to ensure proper functionality, extend the life, and reduce the total cost of ownership of the test instruments.

PS-33A Level Generator Level generator for testing from 50 Hz to 2 MHz.

Public Training Provides training for individuals and small groups of students from various companies at a JDSU-specified location. Courses cover technology and applications for the specified technology or product.

PVA-1000 VoIP Network Analysis Suite VoIP analysis software with remote software capture agents.

QT-200 xDSL & Triple-Play Probe The NetComplete portfolio, a JDSU Service Assurance Solution, combines the QT-200 probe and NetAnalyst Test Management Software, providing an unsurpassed ability to pre-qualify, provision, maintain, monitor, and troubleshoot DSL triple-play services as well as copper loop and POTS lines.

QT-50 Software Agent An integral part of the JDSU NetComplete^TM Service Assurance VoIP portfolio, the QT-50 addresses service providers' needs for proactively monitoring and troubleshooting quality of service (QoS) issues experienced at the customer premises.

QT-600 Ethernet & Triple-Play Probe The QT-600 is a distributed probe targeted at addressing service provider's needs to deliver and guarantee service level performance for VoIP, IPTV and data. The QT-600 uses an affordable distributed approach to provide a total service assurance solution for service turn-up verification, fault isolation, and active and passive performance management.

Ranger™ DSL-Safe Test Ranger incorporates a built-in amplified speaker, plus advanced features unavailable on any other test set in the market.

RCATS® RCATS is an end-to-end service quality monitoring solution for wireless service providers. Utilizing a distributed architecture of Remote Test Probes (RTPs), test controllers and SIM servers, the RCATS solution automatically tests a variety of

voice, data, messaging and other services from an end-user perspective. The solution is typically deployed across multiple geographic locations, supplying service providers with a consolidated view of service quality and detailed reports for each individual service and geographical location.

Re-Certification for Instrument Change of Ownership For instrument certification and warrenty coverage when it changes ownership.

Repair Services Either flat-rate pricing or time-and-materials pricing is available. Factory repair services install ECNs.

Resi-Talker™ Test Set Our most economical test set for basic telephone system work.

Resi-Tester™ This identifier and verification tester is designed exclusively for all home networking and home automation wiring environments — CATV, telephone systems, audio cable, security/alarm wiring, and network cabling.

Resi-Toner™ A full-function tone generator with unique features designed to further test connections on telephone systems and speaker installations. Find your outlets and assure your connections with Resi-Toner™.

Resi-Tracer™ Resi-Tracer combines unique new features for tracing telephone, network, coax, and audio cable with special functions for finding and phasing speakers and testing telephone systems.

RFprotect Distributed WLAN Analysis and IDS Test suite software running on standard laptop PCs with recommended a/b/g adapter cards. Portable solution for locating rogue APS and source of intrusion, for security audits, site surveys, and troubleshooting.

RFprotect Mobile WLAN Analyzer and IDS Test suite software running on standard PCs (e.g. laptop/notebooks) with recommended a/b/g adapter cards. Portable solution for locating rogue APS and source of intrusion. Ideal for security audits, site surveys, and troubleshooting.

RSAM-5600 Remote Service Analyzer Module For QAM and Analog RF testing, including MER, BER, and level. Also provides remote analysis of CATV forward path systems.

Ruggedized Small Channel Count Switch Module The SR Series of fiberoptic switching modules is available in the optical configurations shown schematically below. Both singlemode and multimode versions of the SR Series switch connect optical channels by redirecting optical signal into a selected output fiber.

SDA-4040D Stealth Digital Analyzer Delivers precision "find and fix" measurement tools that will reduce critical test time when analyzing and qualifying broadband performance.

SDA-5000 Stealth Digital Analyzer RF sweep receiver with digital and analog signal analysis for broadband cable networks.

Sectionalizer Fault Isolation Software Software that, when combined with the T3AS Test and Performance Monitoring System, allows service providers to quickly pinpoint where faults occur.

Service ValuePak for Instruments Comprehensive, lifetime support for all of your JDSU instruments.

Service ValuePak for Systems Offers initial and ongoing support that encompasses the entire life cycle of JDSU systems products.

Single Source Repair Complete instrument repair services for all of your test instruments. We offer a single solution that handles all logistical, technical, and accounting activities.

SITT-GGSN Scalable Intensive Test Tool SITT-GGSN provides mobile network operators with an easy-to-use, scalable tool for load testing and background load generation for GGSNs, with special focus on real end user application types (http, wap, mms, ftp, streaming, etc), RADIUS integration and CDR validation.

SITT-IMS Scalable Intensive Test Tool Cost-effective and easy-to-use traffic load test generator, ideally suited for load testing IMS networks with up to 500 000 users in less than 30 minutes. It ensures a risk-free introduction of network changes and upgrades.

SITT-SGSN Scalable Intensive Test Tool SITT-SGSN provides mobile network operators with an easy-to-use, scalable tool for load testing and background load generation for SGSNs and GGSNs, with special focus on call control and mobility signaling.

Small Channel Count Switch Module JDSU Prism Based Switch Modules are ideal for incorporation into customized test assemblies and switch modules.

SmartClass ADSL ADSL1/2/2+ services installation and maintenance tool for field engineers

SmartClass Ethernet The SmartClass Ethernet product is an easy to use, cost effective Ethernet testing solution for basic physical layer cable testing, layer 2 and layer 3 traffic generation, and full RFC 2544 testing. The rugged, battery operated, application specific test tool enables field technicians to turn-up Ethernet and IP services by running an RFC 2544 test or following a set of methods and procedures. The product has been designed for front-line technicians who do not have experience dealing with emerging Metro Ethernet technologies and need a simple to use solution for Ethernet and IP testing. The SmartClass product comes in two major configurations, one a loopback only device and the other featuring full traffic generation.

Speaker Seeker™ Wiremapping is the ability to identify and match-up both ends of installed cable. With the Speaker Seeker, one installer can completely map out a cable installation quickly and accurately—and elevate the job to a professional level. Wiremapping and labeling is the beginning of a good installation every time!

SPM-32A, SPM-33A, SPM-35A, and SPM-36A Selective Level Meters Selective level meters (50 Hz to 620 kHz, 2 MHz, or 3.5 MHz) for conformance testing on digital interfaces.

StealthWare Data analysis software for advanced analysis, reporting, printing, and archiving of test results.

Stressed Eye Generator (OPTX) The JDSU OPTX10A stressed eye generator provides a cost effective 802.3ae Stressed Eye reference for manufacturing and R&D compliance testing.

Swept Wavelength Systems (SWS2000 and OMNI Expansion Series) SWS2000 is a fast, accurate and flexible test solution for characterizing the wavelength dependence of passive optical components. The SWS system consists of: a tunable laser source, a source optics module, a receiver chassis, a control module, one or more detector modules and application software.

SystemCare Center Support Engineer An assigned system engineer provides on-site support, including supplemental hands-on training, operational process improvement, enhanced technical support, system administration support, and on-site repair.

SystemCare Deployment Services Full installation, integration, configuration, and program management services ensure effective implementation of JDSU systems.

SystemCare Expedited Module Hardware Sparing Support When TAC diagnoses a module failure, a new module is shipped out overnight prior to receiving the broken module.

SystemCare Extended Technical Assistance Center (TAC) Support Toll-free hotline 24/7 support and on-site support, if necessary, to resolve a system problem.

SystemCare Inventory/Configuration Check and System Usage Reports Get a better understanding of what you have deployed in your network using a Site Configuration Report to summarize the status of each site.

SystemCare Remote Software Upgrades From a centralized, remote location, elements are upgraded throughout your test system.

SystemCare Software Enhancement Agreement Keep up-to-date with the latest software by automatically receiving all software releases, including corrections and enhancement releases.

SystemCare System Management A modular service plan to keep your networks up and running at full capacity.

SystemCare System Training Operators and system administrators become comfortable with their system, and they are able to use the system to its fullest capacity.

T3AS Test and Performance Monitoring System In-line remote testing and monitoring system for DS3, DS1, and DS0 circuits at sites where digital cross-connect systems (DCS) are not located.

T-BERD 6000 Compact Optical Test Platform The T-BERD 6000 is a compact and lightweight test platform designed for the installation and maintenance of fiber networks. It can perform full fiber characterization measurements.

T-BERD 8000 (Transport Module) The T-BERD 8000 Transport module enables service providers to rapidly, reliably and cost-effectively deploy Transmission services in one convenient package. An important complement to the existing T-BERD 8000 product line, the module supports 10GigE, GigE, SONET, and T-carrier testing in the industry's most innovative test solution.

T-BERD 8000 Scalable Optical Test Platform Completely scalable optical test platform for optical network installation, commissioning, maintenance, and troubleshooting.

TechComplete™ Home Certification Testing Solution Empowers cable operators to increase customer satisfaction by utilizing cutomized, automated testing procedures to significantly reduce repeat service calls and increase productivity.

TechComplete™ Test Productivity Pack Software for maintaining and optimizing your DSAM meters. Provides Field Data Management, Meter Browser Management, and DSAM Remote Access.

Telecom Protocol Analyzer 8631 A highly mobile test solution for troubleshooting and maintenance applications in fixed and mobile network infrastructures. Offers dual E1 receivers through a PCMCIA card. Compatible with the high-end 8630 Telecom Protocol Analyzer.

Telecom Protocol Analyzer 8632 The 8632 is a telecom protocol analyzer that monitors all layers of network installing.

Telecom Protocol Analyzer 8635 Portable protocol analyzer to test all fixed interfaces of mobile radio, access, and SS7 networks.

Telecom Protocol Test System 8619 A portable, fully integrated protocol test system, supporting a wide variety of applications and physical interfaces, including GSM, GPRS, UMTS, VoIP, SS7, ISDN, IN, CDMA, and V5.

Tell-All Indicator Identifies telephone and data lines.

Test and Turn-Up Assistance Final certification and configuration for customers who prefer to perform installations themselves.

Test Automation Services – Custom Test-Systems Building custom-test stands for labs and manufacturers, automating testing for field applications, and automating testing and reporting for systems assurance systems are capabilities that we have. JDSU has a comprehensive portfolio of test equipment and our experience allows us to perform custom test automation with a short, fixed schedule and a competitive fixed price.

Testifier™ The Testifier™ produces the most accurate and easy-to-understand results of any cable tester/verifier on the market. Its large LCD display is easy to read — it shows a clear picture of a wired cable: data, coax, telephone, security/alarm, or unterminated site wires.

Tone Generator™ Our most popular tone generator, with advanced features.

Tone-Tracer Sets a new standard for field service professionals. Due to its slim, ergonomic design, as well as balanced weighting, it is the most comfortable tracer available. It can be used with either a wearable headset or a standard cell phone headset. Quick-change tips for easier in-field use. Includes low battery indicator.

TSR-37 Rubidium Timing Signal Reference A low-cost portable timing reference source for telecommunications and metrology test and measurement applications.

Turbo-Tone™ The most powerful tone generator you can put in your pocket. It generates as much as 700% more power than standard tone generators!

Validator™ NT955 Define the job, make the tests, print the results, store the data… no other tester/certifier does so much, so easily and so economically. Validator™ measures and presents fast and clear SPEED and PERFORMANCE results up to 1 gigabit. The included powerful Plan-Um™ software ties together all the diff erent cable criteria that are found in complex voice/data/video installations and presents concise information in printed reports, while storing data for future use. Speed certification assures your customer that the cabling will do the job it is rated to do. Attached components, switches, hubs, routers and systems will then operate at maximum efficiency. Completing and billing a cable installation job has never been easier. Simply layout your customer’s requirements in a matter of minutes, then defi ne cable types and runs. Test/certify each cable run. Print the results and attach them to your invoice. That’s all there is to it.

Virtual Classroom Provides training for students located at different locations using online tools. Courses focus on technology and applications, and the class is led by an instructor. Both public and single customer courses are available.

VOA and Power Meter Switch (VST) The Polatis VST family of products offers an ideal integration of optical switching, attenuation and power monitoring in a single, compact package.

VoiceLoad H.323/SIP Call Generator A massive bulk H.323 call generator with a series of powerful features.

Windows® PC Detailed Decoder ISDN PC analyzer for quick and easy troubleshooting on ISDN installations.

Wi-Net Window Wireless Tester To install, expand or operate a wireless network you need to be able to see critical information about where the best location is for components, what access should be allowed and where or what security is in place. The new handheld Test-Um Wi-Net Window Analyzer gives you all the critical information you require and more!

JDSU-Acterna نمايندگی انحصاری جهان گسترسامان صنعتشرکت

١۶واحد ۵طبقه ٢٩،پالک بعد از چهارراه ناطق نوری،خيابان پاسداران،خيابان محمد گل نبی،ابتدای تهران، ٢٢٨٨۴۵٧٨: نمابر٠٢١-٢٢٨۶٩٩۶١- ٢٢٨٨١٩۵۶-٨: تلفن١٩۴٧٩ -۵٣٧١١: کد پستی

, www.jdsu.com Email:info@SamanSanat.com , Web site : www.SamanSanat.com