Upload
vukiet
View
220
Download
1
Embed Size (px)
Citation preview
Equipment Specifications
The JCF series hammer mill is a new concept in air
classified milling, utilizing a horizontal rotor disc and liner
with separate classifier, complete with a dosing and air
transport system, all in a single compact machine.
The degree of fineness of the end product ranges between
8 and 150µm starting with a maximum material inlet
particle size of 15 mm and a maximum hardness of around
4 Mohs, but can be adapted for materials with a hardness
of 7 Mohs with specific anti-wear materials.
The mill housing can be easily opened with the built-in pneumatic cylinder for inspection, cleaning and maintenance.
Operating Principle
The milled material is conveyed via an extraction fan to
the high-efficiency dynamic classifier. In the classifier, the
oversize material is sent back into the mill chamber and
subjected to an additional milling cycle. Only the product
with the correct fineness is allowed into the transport
tube, resulting in high milling efficiency.
This arrangement avoids overheating of milled particles
that could destroy their physical characteristics
The product is dosed with a weigh feeder and fed onto the
rotor disc with a rotary valve. Here the particles smash
against each other and against the milling mechanism; to
maximize the efficiency of the grinding action, the material
is subjected to collision, friction and cutting in the space
between the hammer plates on the rotor disc and the mill
liner.
Complete Milling System
Technical Data –MR Series Screen Mill
Mill Series MR - 400
Operational Advantages
• Highest energy efficiency
• Low noise levels
• Low maintenance
• Compact design with reduced space requirements
• Highest quality and reliability
• Easy cleaning and maintenance
• Ability to grind a wide range of materials
STM Mill Series Installed Power
Absorbed Power
Hourly Production
Feed Size
Particle Size* Airflow Pressure Collecting
Filter
type size kW kW Range kg/hr mm µm m3/h mm H2O m2
JCFF 300 18.4 16.6 40-450 < 15 D90 < 20
1600 500 12 D50 < 5
JCFF 400 29.2 26.3 100-1000 < 15 D90 < 20
3000 800 24 D50 < 5
JCFF 600 64.2 57.8 100-1400 < 15 D90 < 20
5000 800 30 D50 < 5
JCFF 800 98.0 88.2 100-1800 < 15 D90 < 20
12000 1000 55 D50 < 5
JCFF 1000 129.0 116.1 250-3000 < 15 D90 < 20
20000 1000 91 D50 < 5
* Data Reference: Calcium Carbonate
A flexible and modular filtration system can be fitted
downstream of the mill, making it possible for a variety of
dosing arrangements or injection points to be integrated
using a single mill.
Experience
STM EcoSystems • 216 US Hwy 206 • Hillsborough • NJ
E-mail: [email protected] Http: www.stmecosystems.com
JCF Hammer Mill (Particle size database available ):
Clay Sodium Carbonate Aluminum Hydroxide Ferrous Sulfate
Bakelite Activated Carbon Wood (chipped) Antimony Sulfide
Bauxite Mineral Carbon Lithopone Molybdenum Sulfide
Bentonite Choline Chloride Mica Muscovite Talcum
Sodium Bicarbonate CMC Soft mineral oxides Rare Earths
Hydrated Lime Cromite Lime Oxide Potassium Titanate
Kaolin Feldspar Magnesium Oxide Wollastonite
Barium Carbonate Fluorine Zinc Oxide Sulfur
Calcium Carbonate Natural Graphite Perlite
Magnesium Carbonate Synthetic Grafite Pyrite