Japmed6 Program

6th Japanese-Mediterranean Workshop on APPLIED ELECTROMAGNETIC ENGINEERING FOR

MAGNETIC, SUPERCONDUCTING AND NANO MATERIALS JULY 27-29, 2009

Politehnica University of Bucharest, BUCHAREST, ROMANIA

Web-site: http://japmed6.elth.pub.ro

FINAL PROGRAM

Sunday 26 July 2009 (PUB Campus, EA building) 17:00-19:00- Registration 19:00-21:00- Welcome Reception Monday 27 July 2009 (PUB Campus, EA building, amphitheatre EA 004) 09:00-09:30- Opening Session Welcome address by the authorities of Ministry of Education, Research and Innovation Welcome address by local authorities Address by the Chairman of JAPMED’6, Academician Professor Dr-Ing. A.G. Mamalis Address by the President of the Japan Society of Applied Electromagnetics and Mechanics, Professor M. Enokizono 09:30-11:30 Oral Session AS on Applied Superconductivity Chairman: J. Kosa (Hungary) 09:30-10:00 Keynote lecture by A. Mamalis (Greece) on «Recent Advances in Applied Electromagnetics and Advanced Materials Engineering in Greece» 10:00-11:30 Oral presentations on Applied Superconductivity

No. ID Title Authors Affiliation AS_1 107 FEM Modelization for

Measurements on Thin Superconductors

Constantin Blaj, Dumitru Toader and Marian Greconici

”Politehnica” University, Timisoara, Romania

AS_2 133 Stability of Toroidal SMES using YBCO tapes for Smultaneous Quench of a few Element Coil

So Noguchi, Seok Beom Kim Hokkaido University, Japan

AS_3 150 Qualification of YBCO Rings and 100% YBCO Wire Loops with the Transformation of the DC Magnetic Field

Janos Kosa Kecskemet College, Hungary

AS_4 071 The realm of unusual compounds of Ag2+: Prediction of crystal structure, magnetism and stability of Ag(II)SO4, a hypothetical superconductor precursor

Mariana Derzsi, Krzysztof Dymkowski, Wojciech Grochala

University of Warsaw, Poland

AS_5 119 High pressure synthesized magnesium diboride- and dodecaboride-based superconductors: structure and properties

T. Prikhna, W. Gawalek, Y. Savchuk, A. Mamalis, V. Tkach, H. Weber, T. Habisreuther, M. Eisterer, W. Karau, M. Wendt, N. Sergienko, V. Moshchil, A. Kozyrev, P. Nagorny, C. Schmidt, V. Melnikov , J. Dellith , D. Litzkendorf, J. Noudem, X. Chaud, V. Sverdun, A. Starostina

Institute for Superhard Materials of the National Academy of Sciences of Ukraine, Ukraine

AS_6 021 Impact of the magnetic flux penetrating vortex core on the critical current of the HTc superconductors

Jacek Sosnowski Electrotechnical Institute, Poland

11:30-12:00 Coffee break

Program of JAPMED’6 - July 27-29, 2009 - Politehnica University of Bucharest Page 1 / 8


12:00-14:00 Oral Session AM on Advanced Materials for Electromagnetic Devices Chairman: R. Hoole (USA) 12:00-12:30 Keynote lecture by M. Enokizono (Japan) on «Construction of Development Technology of Next Generation Applied Electromagnetic Machinery in Japan» 12:30-14:00 Oral presentations on Advanced Materials for Electromagnetic Devices

No. ID Title Authors Affiliation AM_1 146 Inductive proximity sensor with

novel structure of ferrite core Tsutomu Mizuno, Takayuki Fujii, Takahiro Mizuguchi, Yoshio Kishi, Katsuhiko Nakaya, Masaki Kasai, Atsushi Shimizu

Shinshu University, Japan

AM_2 099 Improvement of PM-TFMs Characteristics by Flux Path Guiding

Paul Curiac and Do Hyun Kang Korea Electrotechnology Research Institute KERI, Korea

AM_3 022 Magnetic micro swimming mechanism and visualization of the surface flow induced by the mechanism propulsion

Seiichi Sudo, Kyohei Hoshika, Kyohei Funyu, and Tetsuya Yano

Akita Prefectural University, Japan

AM_4 079 Two-dimensional local vector magnetic property measurement by use of simple transducers

Kouji Hirukawa, Shoichiro Nagata and Masato Enokizono

University of Miyazaki, Japan

AM_5 048 Characteristics of Hydrodynamic Pressure of a Magnetic Fluid in a Tuned Magnetic Fluid Damper

Ken-ichi Ohno and Tatsuo Sawada Keio University, Japan

AM_6 033 Simple-Box-9 coil system: A novel approach to design of a square coil system for producing uniform magnetic fields

Kunihisa Tashiro, Akihito Matsuoka, and Hiroyuki Wakiwaka


14:00-15:00 Lunch break 15:00-16:30 Poster Session I: Advanced Materials, Measurements and Methods

No. ID Title Authors Affiliation POI_1 045 Improvements of Feedback

Control Algorithm in Two-dimensional Vector Magnetic Property Measurements

Takashi Todaka, Takeru Sato, Seiji Ishikawa, Hiroyasu Shimoji, Yoshitaka Maeda and Masato Enokizono

Oita University, Japan

POI_2 064 Non-destructive Evaluation for Internal Defect of Metal Casting

Shoichiro Nagata, Hisafumi Kai and Masato Enokizono

University of Miyazaki, Japan

POI_3 115 Piezoelectric devices for power harvesting on mechanical displacements

Constantin Nitu, Smaranda Nitu, Bogdan Gramescu, and Cristinel Mihalache

Politehnica University of Bucharest, Romania

POI_4 24 Current-phase relation of YBCO/Nb unconventional superconductor junctions

Boris Chesca, Henk-Jan Smilde, Hans Hilgenkamp

Loughborough University, UK

POI_5 043 The effect of volume fraction on the clustering structures of magnetorheological fluids by ultrasonic investigation

Muhammad Agung Bramantya, Hiroki Takuma and Tatsuo Sawada

Keio University, Japan

POI_6 122 Studies of the carrier spin polarization in ferromagnetic semiconductors

B.A. Aronzon, P.J. Kervalishvili, A.S. Lagutin

Russian Research Centre Kurchatov Institute, Russia

POI_7 129 Adaptive scanning algorithm based on neural network prediction of eddy current testing signals

Przemyslaw Lopato, Tomasz Chady, Takashi Todaka

West Pomeranian University of Technology, Poland

POI_8 130 Identification of Conductivity Distribution Using Eddy Current

Tomasz Chady, Ireneusz Spychalski, Takashi Todaka

West Pomeranian University of Technology, Poland

POI_9 105 Linear Position Detection using Magnetic Sensors for Transverse Flux

J.W.Kim, J.Y.Lee. S.R.Moon, D.H.Kang, K.W.Kim, C.H.Chang, J.M.Kim

Industry Applications Research Division, KERI, Korea

POI_10 112 Magnetic Field Inverse Problem of Grounding Grid and Application in the Detection of Grounding Fault

Fan Yang, Yongchang Fu, Wei He, Wenbin Zhang and Huayong Liu

Chongqing University, China

POI_12 039 Static Modelling of One-Dimensional Fractal Waveguide Structures

Jouda Ben Romdhane and Taoufik Aguili

Laboratory of the Communication systems - ENIT BP 37, Tunisia

POI_13 086 Surface induction hardening models based on a novel

Ladislav Musil Institute of Thermomechanics


No. ID Title Authors Affiliation computational method of artificial change of material parameters

ASCR, Czech Republic

POI_14 124 Design and optimization of superconducting levitated module for MagTranS

Gino D’Ovidio, Francesco Crisi and Giovanni Lanzara

University of L’Aquila, Italy

POI_15 031 Nano structure formation by femtosecond laser pulses

A. M. Taleb, K.A. Al Naime, R. Meucci and F.T. Arecchi

University of Baghdad, Iraq

POI_16 091 A study on magnetic properties of Ni50FexAl50-x alloys

N. Duman, A. O. Mekhrabov and M. V. Akdeniz

Middle East Technical University, Turkey

POI_17 098 3D Simulation of Transient Eddy Current Distribution

Yong Liang Ji and Wei He State Key Laboratory of Transmission and Distribution Equipment and System Security and New Technology, China

POI_18 106 Inverse Approach for Current Source Reconstruction

Iliana Marinova and Valentin Mateev

Technical University of Sofia, Bulgaria

POI_19 121 Experimental Investigations of LTSC SMES with Stored Energy 4.5 MJ

Lidia Chubraeva, Eugeny Andreev, Aleksey Orlov, Vladislav Shyshlakov

Saint-Petersburg State University of Airspace Instrumentation, Russia

POI_20 120 Development of Model SMES with HTSC and Nanocrystalline Amorphous Alloy Tapes

Lidia Chubraeva, Eugeny Andreev, Aleksey Orlov, Vladislav Shyshlakov

Saint-Petersburg State University of Airspace Instrumentation, Russia

POI_21 153 Modeling Electromagnetic Radiation of multiple dipole antennas

Daniel Iulian Costia, Mihai Octavian Popescu, Claudia Laurenþa Popescu

Politehnica University of Bucharest

POI_22 125 Unidirectional Solidification of Aluminium Alloys by Using Eddy-Currents for a Controlled Temperature Distribution

Florin Stefanescu, Florea Hantila, Gigel Neagu, Alexandrina Mihai, Cleante-Petre Mihai


POI_23 070 Study of the magnetic anisotropy of the grain oriented (GO) and non-oriented (NO) silicon iron sheets

Veronica Pãltânea and Gheorghe Pãltânea


POI_24 081 Levitation force of a cylindrical bearing with permanent magnets used in an electric meter

Marian Greconici, Dumitru Toader, Constantin Blaj

University of Timisoara, Romania

POI_25 138 Synthesis and catalytic properties of TiO2/PS material

Sorin Marius Avramescu, Radu Claudiu Fierascu, Irina Dumitriu, Simona Florentina Pop, Elena Bacalum

University of Bucharest, Romania

POI_26 026 Reducing the Computing Time in FEM Problems

Constantin Blaj, Dumitru Radu and Ildiko Tatai

University of Timisoara, Romania

POI_27 156 FEM-BEM Method for Flaw Shape Reconstruction in Ferromagnetic Bodies

Marilena Stanculescu and Mihai Maricaru


POI_28 160 A Time Step Choice Algorithm for Transient Analysis of Circuits

F.Constantinescu, A.G. Gheorghe and M. Nitescu


POI_29 158 Utilizing the Polarization Method for Solving a Nonlinear Magnetic Shielding Problem Polarization Method for Solving a Nonlinear Magnetic Shielding Problem

Ioan Florea Hantila, Mihai Vasiliu, Augustin Moraru, and Mihai Maricaru


POI_30 030 IR Technology for Roughness Evaluation

Aurelian Ovidius Trufasu Politehnica University of Bucharest, Romania

POI_31 155 Comparative Analysis of Mitochondrial DNA by using Nucleotide Genomic Signals

Paul Dan Cristea and Rodica Tuduce


POI_32 075 Numerical analysis of the solidification process using eddy currents

Stefan Nagy, Teodor Leuca, Claudiu Mich-Vancea and Adrian Nagy

University of Oradea, Romania

POI_34 072 Extraction of reduced parametric circuit models for passive on-chip

Gabriela Ciuprina, Daniel Ioan and Alexandra Stefãnescu


POI_35 096 Contributions to Flaw Shape Reconstruction in Non Destructive Testing

Marilena Stanculescu , Ioan Florea Hantila and Stelian Marinescu


POI_36 118 Numerical modelling of a cilium using an integral equation method

Mihai Rebican and Daniel Ioan Politehnica University of Bucharest, Romania

POI_37 139 Integral-FEM Simulation and Independent Component Analysis for Multiple Defect Separation from Pulse Eddy Currents Signals

Gabriel Preda and Florea I. Hantila Politehnica University of Bucharest, Romania

POI_38 097 Neural Networks applied in Dan D. Micu, Emil Simion,Czumbil Technical University of


No. ID Title Authors Affiliation Electromagnetic Interference Problems

Levente, Andrei Ceclan Cluj-Napoca, Romania

POI_39 108 Comparison of Iron Losses in Multiple Grain Size Iron Laminations

P. Rovolis,A. Kladas, and J. Tegopoulos

National Technical University of Athens, Greece

POI_40 94 Normal flux distribution at step-lap joints of Si-Fe wound cores

Themistoklis Kefalas, George Loizos, and Antonios Kladas


POI_41 090 Study regarding the transfer of the electromagnetic and thermal field on the processing of fruits in a microwave field

Teodor Leuca, Livia Bandici and Paula Palade


POI_42 074 Optimal solutions for uniform heating of a non-ferrous bar by electromagnetic induction, using numerical modeling

Teodor Leuca, Claudiu Mich-Vancea and Stefan Nagy


16:30-17:00 Coffee break 17:00-19:00 Oral Session AE on Advanced Electromagnetic Engineering Chairman: T. Todaka (Japan) 17:00-17:30 Keynote lecture by P. Cristea (Romania) on «Use of nucleotide genomic signals in prokaryote genomic analysis» 17:30-19:00 Oral presentations on Advanced Electromagnetic Engineering

No. ID Title Authors Affiliation AE_1 154 Study of signal processing for

EMAT Yoshihiro Nishimura, Sasamoto Akira, Takayuki Suzuki

National Institute of Advanced Industrial Science and Technology, Japan

AE_2 126 Power Cable High Frequency Analysis by using Analytical Tubular Conductor Element combined with Finite Elements

Vasilios Lazaris, Antonios Kladas, Athanassios Mamalis and John Tegopoulos


AE_3 032 Proposal of flux concentrated radial and axial magnetic bearings

Yohji Okada, Hidetoshi Miyazawa, Ryou Kondo and Masato Enokizono

Ibaraki University, Japan

AE_4 060 A Magnetic Microsensor with Temperature Compensation based on Optical Mechatronic Technology

I-Nan Chang, Chi-Chih Lai, Hsing-Cheng Chang, Chang-Chou Hwang, Wen-Fung Liu and Chin-Hsiang Ma

Feng-Chia University, Taiwan, ROC

AE_5 054 Two-Degree-of-Freedom Control of an Ionic Polymer-Metal Composite Actuator

Minoru Sasaki, Yusuke Onouchi, Hirohisa, Tamagawa, Satoshi Ito

Gifu University, Japan

AE_6 093 Analysis on The Power Energy Transfer Efficiency of Compact Transmission Lines Based On Poynting Vector

Fan Yang, Tao Chen, Yongchang Fu, Wei He, Wenbin Zhang

Chongqing University, China

19:00 Festive Conference Dinner and Short City Tour by Night

• 19:00-19:30 Transfer by buses from conference venue to the hotels (provisional route of bus stops: Hilton Hotel, Capitol Hotel, K+K Hotel Elisabeta)

• 20:15-20:30 Transfer by buses from above mentioned hotels to the festive dinner location

• 20:30-22:30 Festive dinner • 22:30-23:00 City tour by night and transfer back to the hotels


Tuesday 28 July 2009 (PUB Campus, EA building, amphitheatre EA 004) 09:00-11:00 Oral Session NM on Nano and Micro Scale Applications Chairman: A. Kladas (Greece) 09:00-09:30 Keynote lecture by K. Yamada (Japan) on «Magnetization and giant negative magneto-resistance in nano-scale Ni3- dMn1+d in pulsed magnetic fields up to 25 T» 09:30-11:00 Oral presentations on Nano Micro Scale Applications

No. ID Title Authors Affiliation NM_1 142 Oblique Ion Etching for Copper at

Elevated Temperature T. Hino, T. Kobayashi, Y. Yamauchi and Y. Nobuta

Hokkaido University, Japan

NM_2 145 On the magnetic and magnetoelastic uniformity of amorphous ribbons and wires

Athanasios Mamalis and Evangelos Hristoforou


NM_3 035 Measurements of Magnetic Properties of Fe-Mn-Cr-Si-Sm-B Ferromagnetic Shape Memory Ribbons Depending On Stress and Temperature

Takashi Todaka, Daisuke Yamamichi and Masato Enokizono


NM_4 104 Magnetic Torque Evaluation for Magnetized Nanoparticles

Valentin Ionita and Daniel Ioan University “Politehnica” of Bucharest, Romania

NM_5 092 Effect of stress on the magnetic characteristics of SmFe thin films

Hiroyuki Wakiwaka, Kazuyuki Ohtake, Naoki Itoh, Toshiyuki Takeuchi, Kunihisa Tashiro, Teruo Kiyomiya, and Mika Makimura


NM_6 055 Numerical Analysis of the Polishing Process of Inner Tube Wall Using Micron-size Particles in Magnetic Fluids

Yasushi Ido, Takaya Yamaguchi, Hitoshi Nishida

Nagoya Institute of Technology, Japan

11:00-11:30 Coffee break 11:30-13:30 Oral Session CE on Computational Electromagnetics Chairman: F. Hantila (Romania) 11:30-12:00 Keynote lecture by P. Georgilakis (Greece) on «Recent Advances in Power Transformers» 12:00-13:30 Oral presentations on Computational Electromagnetics

No. ID Title Authors Affiliation CE_1 063 Magnetostatic Analysis of Multiple-

Connected Problems by Boundary Integral Equations

Kazuhisa Ishibashi, Zoran Andjelic and David Pusch

Tokai University, Japan

CE_2 076 An Enhanced Multigrid Method for fast Numerical Computation of the Magnetic Vector Potential

T. Arudchelvam, David Rodger, S. Ratnajeevan H. Hoole

Rensselaer Polytechnic Institute, USA

CE_3 067 Evaluation of Hexahedral Mesh Quality for Finite Element Method in Electromagnetics

Yuichiro Motooka, So Noguchi and Hajime Igarashi

Hokkaido University, Japan

CE_4 141 A Three-Dimensional FEM Model of Breast Cancer Localisation Using Thermographical Investigation

Oana Drosu, Florea Hantila, Mihai Maricaru and Calin Tiu


CE_5 059 Evaluation of the iron loss of the actual stator core to achieve high efficiency of the rotating machine

Mohachiro Oka, Tugunori Kanada, Takayuki Kai and Masato Enokizono


CE_6 029 Analysis on the gap bandwidth of some high impedance surfaces

Ladislau Matekovits and Aldo De Sabata

Politecnico di Torino, Italy

13:30-14:30 Lunch break


14:30-15:00 Session AEA on Advanced Engineering Applications Chairman: T. Sawada (Japan) 14:30-15:00 Keynote lecture by Hyun-Kyo Jung (Korea) on «Optimal Design of Electromagnetic Actuator for High Voltage Circuit Breaker» 15:00-16:30 Poster Session II on Advanced Engineering Applications

No. ID Title Authors Affiliation POII_1 077 A Formal UML Reliant Software

Engineering Approach to Finite Element Software Development for Electromagnetic Field Problems

S. Ratnajeevan H. Hoole and T. Arudchelvam

Rensselaer Polytechnic Institute, USA

POII_2 136 Development of Lorentz force type magnetic bearing

Nobuyuki Kurita, Takeo Ishikawa and Yohji Okada

Gunma University, Japan

POII_3 082 PM Axial Flux Computation using Analytical Techniques

Costin Ifrim DRS-Power Technologies Inc., USA

POII_4 103 Comprehensive Research on Stator Shapes and Frames in Switched Reluctance Motor: Electromagnetic, Thermal and Vibration Analyses

Jian Li, Dawoo Choi and Yunhyun Cho

Dong-A University, Korea

POII_5 102 Thermal analysis of Canned Induction Motor for Coolant Pump Considering the Eddy Current Loss in Cans

Jian Li, Jungtae Song and Yunhyun Cho


POII_6 061 Optimization Design of IPMSM to Reduce Cogging Torque Considering Tapping and Barrier Flux Angle

Chang-Sung Jin , Dae-Sung Jung, Ik-Sang Jang, and Ju Lee

Hanyang University, Korea

POII_7 062 Design of Variable Reluctance Resolver for Servo IPMSM

Chang-Sung Jin , Seung-Joo Kim, and Ju Lee

Hanyang University, Korea

POII_8 088 Comparison of Force Pulsation Characteristics of PMLSM with Integral-Slot winding and Fractional-Slot Winding

Yu-wu Zhu, Sang-min Jin, and Yun-hyun Cho


POII_9 089 Optimal Design of Permanent Magnet Linear Synchronous Motor with Low Force Pulsations Using Response Surface Methodology

Yu-wu Zhu, Sang-min Jin, and Yun-hyun Cho


POII_10 114 Characteristic Analysis of a Permanent Magnet Transverse Flux Linear Motor with Spiral Core

Ji-Young Lee, Ji-Won Kim, Byung-Chul Woo, 1Do-Hyun Kang, Kwang-Woon Kim, Trung Kien Hoang, and Jung-Hwan Chang

Korea Electrotechnology Research Institute, KERI, Korea

POII_11 140 Performance Improvement of the 3-Phase Outer Rotor Type Brushless DC Motor for Pump

Do-Kwan Hong Korea Electrotechnology Research Institute, KERI, Korea

POII_12 036 Quantitative analyses of a DC magnetron sputtering system with refined structure for performance enhancements

Cheng-Tsung Liu, Ming-Chih Lai, Chang-Chou Hwang

National Sun Yat-Sen University, Taiwan, ROC

POII_13 046 Design Comparison of Fractional-slot IPM Machine Types for an Electric Power Steering Application

Chang-Chou Hwang, Hsing-Cheng Chang, and Cheng-Tsung Liu

Feng Chia University, Taiwan, ROC

POII_14 047 An Interactive design of the Winding Layout in PM Machines

Chang-Chou Hwang, Cheng-Tsung Liu, and Hsing-Cheng Chang

Feng Chia University, Taiwan, ROC

POII_15 095 Calculation of Temperature Filed in Distribution Substation and Design for Energy Conservation Cooling System

Tao Chen, Fan Yang, Yongchang Fu3, and Xiaochu Luo

Chongqing Electric Power Research Institute, China

POII_16 025 Finite element simulation and experiment of electromagnetic pyretogenic technology based on loss of electrical machine

Peng Zhang, Shukang Cheng, Bin Guo

Harbin Institute of Technology at Weihai, China

POII_17 069 Study of Variable Speed Wind Turbine with Boost and Non-inverting Buck-Boost Choppers and Maximum Power Control Strategy

Vladimir Lazarov, Daniel Roye, Dimitar Spirov

Technical University of Sofia, Bulgaria

POII_18 057 Modeling of Lundell alternator Barz Cristian, Oprea Constantin, Chiver Olivian

University of North Baia Mare, Romania


No. ID Title Authors Affiliation POII_19 117 Varistor Modelling for PSIM

Applications Simulations Cristinel Mihalache, Smaranda Nitu, Florin Ionescu

Politehnica University of Bucharest

POII_20 134 Force Determination in Current Controlled Actuator With Permanent Magnets

Camelia Petrescu, Radu Olaru Technical University of Iasi, Romania

POII_21 116 Electromagnetic exposure from GSM and UMTS indoor base stations

Victor Nitu, George Lojewski and Smaranda Nitu

Orange Romania S.A., Romania

POII_22 157 The Numerical Calculation of HV Fuses Pre-Arcing Time in The Case of Adiabatic Process

Ioan Florea Hantila, Mihai Maricaru, Marilena Stanculescu and Valer Giurgiu


POII_23 159 A reduced order circuit model for an interdigital capacitor

Alexandru Gheorghe, Daniela Chiriac and Florin Constantinescu


POII_24 151 Navigation Path Extraction in Virtual Endoscopy Based on Solution of Stationary Current Flow Problem

Gabriel Preda, Radu Cristian Popa, Radu Cornel Marian

Advantec Solutions, Romania

POII_25 152 Centerline Extraction in Virtual Endoscopy Based on Severe Domain Mesh Decimation

Gabriel Preda, Radu Cristian Popa, Radu Cornel Marian

Advantec Solutions, Romania

POII_26 144 Hybrid Commutation Converter in HVDC Systems

H. Balan, M. Buzdugan, I. Vadan, E. Simion, P. Karaissas

Technical University of Cluj Napoca, Romania

POII_27 080 Horizontal configuration of static permanent magnet diamagnetic levitation

Emil Cazacu and Iosif Vasile Nemoianu


POII_28 044 Electromagnetic Analysis and Comparison of Wound Cores and Octagonal Wound Cores of Distribution Transformers

Iván Hernandez, Francisco de Leon, Juan Carlos Olivares-Galvan, J. M. Caned, Pavlos S. Georgilakis

Technical University of Crete, Greece

POII_29 051 A simulated annealing algorithm for optimal sizing of small isolated power systems

Yiannis A. Katsigiannis, Pavlos S. Georgilakis, Emmanuel S. Karapidakis

Technological Educational Institute of Crete, Greece

POII_30 052 Economic evaluation of a micro power grid system within Crete Island

Yiannis A. Katsigiannis,, Emmanuel S. Karapidakis


POII_31 065 A complete software package for transformer design optimization and economic evaluation analysis

Eleftherios I. Amoiralis, Pavlos S. Georgilakis, Marina A. Tsili, Antonios G. Kladas, Athanassios T. Souflaris


POII_32 068 Generation expansion planning of Crete power system for high penetration of renewable energy sources

Emmanuel S. Karapidakis, Yiannis A. Katsigiannis, Pavlos S. Georgilakis, Emmanuel Thalassinakis


POII_33 128 Evaluation of energy-saving measures in the residential sector of Greece

Konstantinos Rovlias, Dionysia Kolokotsa, Yiannis A. Katsigiannis, Pavlos S. Georgilakis


POII_34 058 State-of-the-art of Power Converter Topologies and Control Techniques for Variable Speed Wind Energy Conversion Systems

Pavlos S. Georgilakis and Peter G. Vernados

Technological Educational Institute of Piraeus, Greece

POII_35 123 Flexible AC Transmission System Controllers: An Evaluation

Pavlos S. Georgilakis and Peter G. Vernados


POII_36 137 Time Variation of Operational Characteristics for a Linear Permanent Magnet Synchronous Generator under Various Load Conditions

Nikolaos M. Kimoulakis and Antonios Kladas


POII_37 109 Coupled Field and Circuit Model Analysis of Permanent Magnet Synchronous Machine for Direct Torque Control Optimization

Evaggelos Tsambouris, Charalambos Patsios, Antonios Chaniotis and Antonios Kladas


POII_38 078 Distribution transformer power loss modelling with Support Vector Machines and Genetic Algorithms

Konstantinos Passadis, George Loizos, Antonios Kladas

Hellenic Transmission System Operator, Greece

POII_39 110 Investigation of the Impact of the Operational Temperature on the Performance of a Surface Permanent Magnet Motor

Minos Beniakar, Themistoklis Kefalas and Antonios Kladas


POII_40 149 Effects of shading on the PV module characteristic curves

E. Paraskevadaki and S. Papathanassiou



16:30-17:00 Coffee break 17:00-19:00 Oral Session AA on Advanced Applications Chairman: E. Hristoforou (Greece) 17:00-17:30 Keynote lecture by T. Suzuma (Japan) on «New Signal Processing Method for Electromagnetic Inspection Using Multidirectional Magnetizing Type Sensor» 17:30-19:00 Oral presentations on Advanced Applications

No. ID Title Authors Affiliation AA_1 066 Estimation of Magnetization

Distribution in Permanent Magnet of Brushless DC Motor

Takeo Ishikawa, Kouki Yonetake, Nobuyuki Kurita and Masahisa Tsuchiya

Gunma University, Japan

AA_2 027 Characterization of the photovoltaic array parameters from the transient charge of a capacitor

Jean Sumaili Akilimali, Filippo Spertino, Horia Andrei and Gianfranco Chicco

Politecnico di Torino, Italy

AA_3 020 Surface Responses of Magnetic Fluid Adsorbed to Permanent Magnet Subject to Vertical Vibration

Seiichi Sudo, Yuichi Kurosu, and Daisaku Asano

Akita Prefectural University, Japan

AA_4 056 A Coupled System of a Magnet and Magnetic Fluid in a U-tube under Reciprocating Traveling Magnetic Field

Yasushi Ido, Koichi Hayashi, Takahiro Kunitomo

Nagoya Institute of Technology, Japan

AA_5 132 Magneto-elastic Bilayers for Sleep Apnea Monitoring

S. Traxler, H. Pfützner, E. Kaniusas, K. Futschik

S. Traxler Institute of Electrodynamics, Austria

AA_6 147 Zero Power Control for Mechanical Magnetic Suspension System Using Spring Force

Koichi Oka, Feng Sun Kochi University of Technology, Japan

Wednesday 29 July 2009 08:00-22:00 - Closing Session and Concluding Remarks during the one-day trip in the Carpathian Mountains to Prahova Valley: Peles Castle and Bran (DRACULA) Castle

• 8:00-8:30 Transfer by buses from hotels (provisional route of bus stops: Hilton Hotel, Capitol Hotel, K+K Hotel Elisabeta)

• 8:30-15:00 Trip including lunch in the bus (catering) and visits at the two castels

• 15:00-17:30 Dinner in a traditional village restaurant. Closing Session and Concluding Remarks

• 17:30-22:00 Trip and bus transfer back to the hotels

Documents

Japmed6 Program