5
JAINIK SHAH [email protected] 125 Jefferson Avenue, Green Brook, NJ 08812 Ph # (732)-310-0585 OBJECTIVE: To obtain a position as a Telecom Engineer and implement my technical skills and knowledge that can add value to the Engineering firm. Profile: More than 3 years of Experience in Network testing and Mobile Device testing in Telecom industry. Experienced working in all phases of the Device Testing cycle. Worked on developing Test Plan, Test Strategy, and Test Cases. Successfully performed testing on new technology carrier trials such as VoWi-Fi, VoLTE, SRVCC, eMBMS, Carrier Aggregation, LPP, e911, ePDG and IMS. Extensively worked on execution of Test cases, writing effective Test Summary and Defects Reports. Familiar with different tools such as QXDM, QPST, QCAT, TEMS, NNext, and MS Office suite. Proficient in testing Modem/Device Throughput with several different tools. Extensively worked on Voice Quality Testing (MoS) and 3G call performance testing of Mobile Devices. Hands on Experience with Stress Testing and Regression Testing. Experienced with Issue Identification, Issue reporting and Issue Follow-ups. Extensive experience working with GSM and CDMA technology from testing perspective. Very good understanding of 3GPP and 3GPP2 standards and technological advancements. Good understanding of testing different versions of Android OS.

Jainik Shah

Embed Size (px)

Citation preview

Page 1: Jainik Shah

JAINIK SHAH [email protected] 125 Jefferson Avenue, Green Brook, NJ 08812 Ph # (732)-310-0585

OBJECTIVE: To obtain a position as a Telecom Engineer and implement my technical skills and knowledge that can add value to the Engineering firm.

Profile:

More than 3 years of Experience in Network testing and Mobile Device testing in Telecom industry.

Experienced working in all phases of the Device Testing cycle. Worked on developing Test Plan, Test Strategy, and Test Cases. Successfully performed testing on new technology carrier trials such as VoWi-Fi, VoLTE,

SRVCC, eMBMS, Carrier Aggregation, LPP, e911, ePDG and IMS. Extensively worked on execution of Test cases, writing effective Test Summary and

Defects Reports. Familiar with different tools such as QXDM, QPST, QCAT, TEMS, NNext, and MS Office

suite. Proficient in testing Modem/Device Throughput with several different tools. Extensively worked on Voice Quality Testing (MoS) and 3G call performance testing of

Mobile Devices. Hands on Experience with Stress Testing and Regression Testing. Experienced with Issue Identification, Issue reporting and Issue Follow-ups. Extensive experience working with GSM and CDMA technology from testing perspective. Very good understanding of 3GPP and 3GPP2 standards and technological

advancements. Good understanding of testing different versions of Android OS. Effective logical thinking, strong Analytical and Communication skills. Ability to learn new things quickly and adaptability, and ability to work in a team as well

as individually. Good interpersonal skills with capable of handling multiple tasks and priorities, self-

motivated and dedicated. Enthusiastic, detail oriented and organized to work in a fast paced and team oriented

environment.

WORK EXPERIENCE:

BTI solutions Inc. (Client: Samsung Telecommunication of America) Jun 2012- Present

Work Profile: RF Field Test Engineer

Represented Samsung on several new technology carrier trials and coordinated with Ericson, Qualcomm, AT&T, Verizon, T-Mobile, and ALU.

Worked and supported Verizon in the lab to implement Voice over WiFi feature.

Page 2: Jainik Shah

Successfully supported Verizon and AT&T on a new technology trial implementing eMBMS for LTE broadcast/multicast to the live network.

Successfully completed Carrier Aggregation testing on CAT4 and CAT6 for T-Mobile on different radio networks with different frequency configurations.

Supported T-Mobile to perform e911 and LPP (Location Positioning Protocol) testing on different radio network configurations in different markets.

Supported Verizon on e911 implementation by making physical test calls to the PSAP location over LTE radio using multiple different testing scenarios.

Successfully performed KPI Testing and IOT Testing for protocol and over the air interface i.e. cell selection, cell reselection, cell redirection, handovers, IRAT handover mobility, LTE Performance testing, mobility management testing.

Performed various throughput tests on different bands: LTE, 3G, 2G, eHRPD, EvDO, 1xRTT: TCP, HTTP, UDP, FTP and Ping.

Responsible for reviewing and updating test cases as per changing requirements from carriers.

Closely worked with the cellular carriers and mobile technology partners to evaluate new technology solutions, following the test plan and perform different test cases.

Proficient in Manual and Automated testing of Mobile Devices at different stages(Development/Production)

Upgraded the firmware from one version to another and done analysis of effects. Performed Voice Call Processing and Data Throughput Testing on wide range of

Samsung Devices and Tablets. Successfully performed the tasks provided by IOT Manager related to the lab work for

Verizon, Metrico wireless and ALU. Partially analyzed the logs to resolve issues using NNEXT Tool. Performed automated Voice Quality Testing (MoS) and Call Performance using NOMAD

tool. Successfully Fetched RAM Dumps, TCP Dumps, ADB logs, QXDM logs with proper

troubleshooting. Loaded software with proper troubleshooting when needed. Tested on several tools such as NNEXT, Mobile Analyzer, Nomad tool, Datum,

Wireshark, Odin, DU meter, QXDM, QCAT, SnapperHS, e911APK, XCAL, QPST and many more.

Used different technologies such as CDMA, EVDO, GSM, WI-FI, VOIP, LTE, HSDPA, HSUPA, HSPA+, WIMAX, UMTS ETC. with all AT&T, Verizon, T-Mobile and Sprint clients and products.

Performed various tests on Wi-Fi, BT and NFC technologies. Knowledge about TCP/IP networking skills (IPv4/IPv6, DHCP, DNS, HTTP, Servers). Performed VoLTE and Non-VoLTE testing on devices. Proficient with the testing related to IMS, IR94 and VoLTE features.

Reliance .Comm. (India) Jan 2009-July 2009Work profile: Student Intern

Page 3: Jainik Shah

Tested signals and provided the signal information to Network Management System(NMS)

Signal information from the BTS was then evaluated at the NMS. Performed preventive and corrective maintenance and troubleshooting of all BTS

equipment. The BTS is integral part of BSS (Base substation System).

TATA VSNL Inc. (India) Jan 2008-Dec 2008Work profile: Student Intern

Facilitated Project Manager, System Technologist, Field Workers and other stakeholders in developing and implementing data channels for the end user.

Optimized network optical cables in order to enable clear data transfers to various base stations.

Collaborated with the network team to successfully allocate dedicated lines to its proper channels.

Rectified transmission equipment’s by thoroughly conducting fault analysis and identifying opportunities for improvements.

Performed Fiber Splicing technique on network optical cables in order to prevent transmission and reception of data leakage.

EDUCATION: Master in Electrical and computer Engineering (GPA: 3.45) December 2011

New York Institute of Technology, New York Bachelor in Electronics and Communication (GPA: 3.17) 2003-2008 PIET (Gujarat University) Projects: Designing of 2.4 GHz Omni directional Antenna and testing.

Designed the antenna for matching all the required parameters Tested the VSWR,GAIN,AZIMUTH and Front to back ratio for that

Design of DATA FORWARDING ENGINE using VLSI code. Designed the data forwarding through the forwarding engine using VLSI code and have

compiled and simulated it on the software named SONATA EDA tool Design the Test bench and Design top for that Also done all the simulation and its graphs of outputs Prepared report explaining the basic concept of data forwarding Design of MIPS-64 pipelined computer architecture which runs on standard MIPS-64

instruction set Designed the hardware that is compatible with all MIPS-64 instruction set Tested the design for all possible Instructions and resolved all the hazards that came

acrossDesigning of control system of servo motor

Designing of motor controller using phase lead, Phase lag technology. Calculating the response and comparing it with PID response. Plotting bode plot and conclusion for optimization.

Technical SKILLS:

Page 4: Jainik Shah

Computer skills: C, C++language coding, MathCAD, Mat lab, VHDL coding, Assembly line coding

RF Tools: Use 5 phone PBX switching system, MAPINFO, Microsoft Streets, Ericsson TEMS 11.0.4 and 12.0.3, Actix Analyzer, Pearl script

OS Platforms: Windows 98/2000/XP/Vista/windows7, basics of Linux & DOSTechnology: UMTS,WCDMA,CDMA,GSM,LTENetworking : TCP/IP, OSI model, VOIP, Mobile IP

Relevant Course Work:Mobile Communications, Digital communication, Signals and systems, Antenna theory, Semiconductor electronics, Network Analysis, Computer Architecture, Random Signals, Nano technology, Wireless Communication, VLSI design, Biomedical Instrumentation