JACKS AND 877-AZTool1 HYDRAULICS · safety, quality and efficiency. As a total supplier, our wide product range gives you the optimal equipment for all types of lifting tasks. DK20Q

25Prices subject to change without notice. Please do not return purchases to the store. For information regarding warranty or repair and/or any questions or concerns, please call 1-877-AZTOOL1.

DK20HLQ 2.2 Ton Long Reach Hydraulic JackSKU 762499 799 99ACHDK20HLQ• High-Lifting Jack Ideal

for SUVs and Vans• Minimum Height: 3.15"• Durable High-Strength Steel Frame• Equipped with Quick-Lift Pedal• Manual Dead Man’s Release• Built-in Safety Overload Valve• Noiseless Wheels• Maximum Height: 31.3"

DK13HLQ Long Reach Hydraulic JackSKU 762485 599 99ACHDK13HLQ• 2,900 Lbs. Capacity• Ideal for Cars with Low Clearance• Minimum Height of Only 3.15"• Durable High-Strength Steel Frame• Equipped with Quick-Lift Pedal• Manual Dead Man’s Release• Built-in Safety Overload Valve• Noiseless Wheels• Maximum Height: 28.9"

Portable 11 Ton Air Hydraulic JackSKU 765557 1,699 99ACHB25-2 REG. 1,899.99 • Minimum Height: 6.38"; Weight: 60 Lbs.• Hard Chromium Plated Piston Rod for Long Life• Built-in Safety Overload Valve• Hand-Operated Dead-Man’s Control• 2 Extensions (1.97"/3.94") for Max. Height of 18.5"

DANISH MADE QUALITY

NEW PRODUCTLINE

We care about the safety of your employees. We can guarantee 100% Danish Made quality and uncompromising product safety because we produce everything in our Danish factory.

Focusing on the everyday life of the mechanic, all products from AC Hydraulic are characterized by a strong focus on safety, quality and efficiency.

As a total supplier, our wide product range gives you the optimal equipment for all types of lifting tasks.

1234 1234DK20Q (2 t)HYDRAULIC JACK

B25-2 (25 / 10 t)PORTABLE AIR HYDRAULIC JACK

Jack for passenger cars and vans Ideal for service vans etc.

WJN5 Hydraulic Workshop CraneSKU 804587 799 99ACHWJN5 • 1,200 Lbs. Capacity • Foldable within Seconds for Quick and Easy Storage• Hard Chromium Plated Piston Rod and Pump

Piston for Long Life• Built-in Safety Overload Valve• Lifting Hook Pivots 360°• Hand-Operated Dead-Man’s Control

3-1/4 Ton Low Profile JackSKU 757109 249 9924837• Equipped with Rear

Swivel Casters• Min. Height: 3-1/2"

Max. Height: 19-1/2"• Low Profile Professional

Quality Floor Jack for Low Clearance Vehicles

• Overload and Bypass Safety Valves

• Weight: 94.8 Lbs.

1/2 Ton Capacity Vehicle DolliesSKU 757086 99 99 24857• 1,000 Lbs. Capacity• Heavy Duty Swivel Casters for Easy Movement• Durable Steel Construction• Features Rails on Each Side for Easy Transport• Sold in Pairs

VL6 Hydraulic 600 Lbs. Transmission JackSKU 804488 519 99ACHVL6• Pedal Operated Pump for Hands-Free Use• Precise Adjustment for Positioning of Transmission• Hand-Operated Dead-Man’s Control for Optimal Safety While

Lifting and Lowering• Galvanized Support Saddle and Base Frame• Built-in Safety Overload Valve• Sturdy Swivel Casters for Optimal Stability and Maneuverability• Hard Chromium Plated Piston Rod and

Pump Piston for Long Life

75.6" REACH

2 Ton Low Profile JackSKU 757041 279 9924838• Equipped with Rear

Swivel Casters• Min. Height: 3"

Max. Height: 24"• Low Profile Professional

Quality Floor Jack for Low Clearance Vehicles

• Weight: 101.2 Lbs.

JACKS AND HYDRAULICS

6 Ton Jack Stands (Pair)SKU 757050 79 99 24853 • Min. Height: 15-3/4" - Max. Height: 24-3/8"• Recessed Saddle for a Secure Placement• Sold in Pairs

3 Ton Jack Stands (Pair)SKU 757122 49 9924852 • Min. Height: 12" - Max. Height: 17-3/4"

Garage Floor Jack CrossbeamSKU 544803 59 9924833• Compatible with Any Floor Jack That Has a 1-1/8"

Diameter Saddle Stud• Saddles Adjust from 23" to 32" on Center• Weight Capacity at Min. – Max. Width: 3,000 Lbs. – 4,000 Lbs.

877-AZTool1 877-298-6651Hablamos Español

AZtool1.com

DANISH MADE QUALITY

NEW PRODUCTLINE




1234 1234DK20Q (2 t)HYDRAULIC JACK


Jack for passenger cars and vans Ideal for service vans etc.Just as our products offer high performance and quality, so does our warranty. The immense amount of workmanship, testing, and precision engineering that each of our products receives enables us to maintain our high quality. Our long warranty is our way of showing you can trust our quality.

DANISH MADE QUALITY

NEW PRODUCTLINE




12341234DK20Q (2 t)HYDRAULIC JACK


Jack for passenger cars and vansIdeal for service vans etc.

2.2 Ton Hydraulic JackSKU 765533 399 99ACHDK20Q• Minimum Height: 3.15"• Durable High-Strength Steel Frame• Manual Dead Man’s Release for

Optimal Safety when Lowering• Built-in Safety Overload Valve• Noiseless Wheels• Equipped with Quick-Lift Pedal• Maximum

Height: 19.5"

3-1/2 Ton Hydraulic Floor JackSKU 746260 209 9924836• Min. Height: 5-3/4"

Max. Height: 19-3/4"• Features Foot Pedal for

Quick Lift• 360 ° Swivel Casters for

Easy Maneuvering• Overload System Prevents

Use Beyond Rated Capacity• Weight: 81.6 Lbs.

INNOVATIVE TOOLS. BETTER VALUE. QUALITY RESULTS.

These Jack Stands are Designed to Increase Your Productivity While Maintaining Safety. The Self-Locking Ratcheting Design Allows Quick and Safe Adjustments to the Height of the Stand.

SAVE$200

Offer Good Through March 31, 2019 - While Supplies Last

Heavy Duty 22 Ton Axle Stands (Pair)SKU 757098 2349924854• Min. Height: 12-1/4"• Max. Height: 19-3/4"• Adjustable Pin Design• Features Handle for Transport and Positioning

• Large V-Shaped Saddles Center Lift Points for Secure Placement

26 Prices subject to change without notice. Please do not return purchases to the store. For information regarding warranty or repair and/or any questions or concerns, please call 1-877-AZTOOL1.


1/2 Ton Capacity Transmission JackSKU 902481 349 99 RANRTJ1100• Lifting Capacity:

1,100 Lbs.• Lowered Height: 45"• Raised Height: 72"

72" REACH

71" REACH

1,100 Lbs. High Lift Transmission Jack with Foot Pump SKU 750006 329 99 24844 • Lift Range:

47" - 77"• Adjustable Saddle with Tilt• Spring-Loaded Release

Valve Controls Lowering• Durable Steel Casters

77" REACH

1,000 Lbs. Telescopic Transmission Jack SKU 544786 199 99 24840 • Lift Range:

51" - 70"• Adjustable Saddle with Tilt

in Both Directions• Durable

Steel Casters• Safety Tie-Down Chain

to Secure the Load

70" REACH

71-1/2" REACH

1-1/2 Ton Telescoping Transmission Jack SKU 902484 749 99 RANRTJ3000• Capacity First

Stage: 3,000 Lbs.• Capacity Second

Stage: 2,000 Lbs.• Lowered Height:

35-1/2"• Raised Height:

71-1/2"

1 Ton, 2 Stage Transmission Jack SKU 544788 619 99 24842 • Lift Range:

33.5" - 72.5"• 3 Way Adjustable

Saddle Slides and Tilts Both Directions

• Convenient Foot Pedal Pump and Release

• Safety Anchor Chain Included

72-1/2" REACH

VLT12 Hydraulic 1.3 Ton Transmission JackSKU 804510 1,699 99ACHVLT12• Designed for Lifting

Heavy Truck Transmissions• Pedal Operated Pump with

Built-in Quick Lift for Hands-Free Use• Precise Adjustment for Positioning

of Transmission• Hand-Operated Dead-Man’s Control

for Optimal Safety While Lifting and Lowering

• Galvanized Support Saddle and Base Frame

• Built-in Safety Overload Valve• Raised Height: 75-1/2"

AC Hydraulic AS3 Gearbox SaddleSKU 804521 959 99ACHAS3• Capacity: 2,200 Lbs.• Dimension: 21.34 x 15.16 x 4.33 In.• 10º Tilt in All Directions for

Accurate Dismounting and Re-Mounting of Gearboxes

• Fitted with 2 Straps and 4 Magnetic Rubber Support Blocks

• Fits: GD-1, GGD, GDT, VL10, VLT6 and VLT12

75.6" REACH

Fuel Tank Adapter for Transmission JacksSKU 222503 189 99DOWJDI-FTA7• Safe and Convenient Adapter for Handling Vehicle Fuel Tanks• Works with Most Transmission Jacks

The Professional Choice for Safe Fuel Tank Removal and Fuel Pump Service. Mounts Easily on Most Transmission Jacks.

Transmission Jacks

Set of 4 Vehicle Position Jacks with Storage CradleSKU 696485 649 99 68986 • Includes (4) Position Jacks with Storage Stand• Move a Vehicle (Up to 6,000 Lbs.) with Ease • Adjusts 3.25"

Two 1,500 Lbs. Vehicle Position JacksSKU 298098 299 9924855TWO • Hydraulic Ram Provides Stable Foot Pedal

Lift in Seconds• Rolls in Any Direction

Wheel Dollies

Vehicle Position Jack Storage RackSKU 544800 69 99 24856 • Neatly Secure and Store Up to (4) Vehicle Car Dolly Jacks• Dimensions: 24-7/8" (L) x 31-7/8" (W) x 9-9/16" (H)• 5" x 1" 360º Swivel Ball Bearing Wheels for Easy Maneuvering• Weight Capacity: 300 Lbs.

• Powered By a Rechargeable 12,000 mAh Lithium-ion Battery

• Holds Charge for 6 Months

Features a Powerful LED Flashlight with 3 Modes: Normal, Strobe and SOS

3 MODE LIGHT

Quickly Inflates Tires with 1.2 SCFM

TIRE INFLATOR

3 Ton Jack Lifting Range: 7.25" to 14.25"

Simply Position the Jack and Activate - No Manual Labor

3 TON JACK

Jump Start Your Vehicle with 200 Cold Cranking Amps and 400A of Peak Current

JUMP START

22 Ton Air Hydraulic Truck JackSKU 544796 469 9924851 • Compact, Low Profile

Design Easily and Safely Fits Between Wheels of Tandem Axle Vehicles

• Min. Height: 8-1/2"• Max. Height: 17-3/4"• Ram Travel: 4-3/4"• Extension Screw

Adjustment: 4-1/2"

20 Ton Air Hydraulic Bottle JackSKU 544795 129 9924850 • Can Be Operated

with Air or Manually• Height: 10.25" - 20"• Extension Screw

Adjustment: 3.25"

Air Hydraulic Jacks

800 Lbs. Low Profile Transmission JackSKU 544789 329 9924843 REG. 349.99• Lift Range: 8-1/4" to 30-1/2"• Fully Adjustable Saddle Adapts

to Most Transmission Pans• Swivel Saddle Adjusts Both Directions• 4 Swivel Ball Bearing Casters for Ease of Mobility

Floor Style Transmission Jack

SAVE$20


EMERGENCY TOOL Rechargeable All-in-One

30799SKU 012672 | 24468

1 Ton Telescoping Transjak™

SKU 902478 639 99RANRTJ1• Capacity First Stage:

2,000 Lbs.• Capacity Second

Stage: 1,000 Lbs.• Lowered Height: 37"• Raised Height: 71"

DID YOU KNOW?AutoZone® offers a full line of bulk

replacement hose clamps.Contact Your AutoZone Commercial

Sales Manager for Details

$20 ON OEMTOOLS 800 LBS. LOW PROFILE TRANS. JACK - 24843

SAVE


1,250 Lbs. Engine StandSKU 462493 139 99 24829• Easy-to-Move and Rotate• Heavy Gauge Square Steel Tube Frame• Extra Wide 4 Wheel Base Provides Added Stability• 360º Rotation• Lock Pin Locks

Engine into Position

• Includes Tool Tray

Color May Vary

1,250 Lbs. Rotating Engine StandSKU 757103 389 99 24846 • Adjustable Mounting Arms to Fit Most Engine Configurations• Locking Head Plate with 360º Engine Rotation• Tubular Steel Construction• Folding Legs for

Easy Storage• Heavy Duty Worm Gear

for Effortless Rotation

1,000 Lbs. Engine StandSKU 757115 109 99 24839• Adjustable Mounting Arms to Fit Most Engine

Configurations• Locking Head Plate with 360º Engine Rotation• Tubular Steel Construction

1 Ton Folding Engine StandSKU 544804 199 99 24834 • Folds Upright to Conserve Valuable Floor Space• Sturdy, Wide Base Design to Prevent Tipping

Under Load• Slotted Adjustable Saddle Permits Quick and Easy

Installation• Head Swivels

360° to Easily Position Engine

2 Ton Folding Engine Crane SKU 902288 399 99RANRSC2TF

• Heavy Duty Hydraulic Folding Engine Hoist with 8 Ton Capacity Ram is Perfect for Shops That Have Limited Space But Still Need the Pure Lifting Convenience of a Crane

• Front Casters Include a Safety Brake to Prevent Movement

2 Ton Folding Shop Crane SKU 544801 429 9924830

• Foldable Design Makes for Convenient, Easy Storage

• 6 Solid Steel Caster Wheels Add Mobility

• Fully Adjustable 4 Position Boom

WJN5 Hydraulic Workshop CraneSKU 804587 799 99ACHWJN5

• 1,200 Lbs. Capacity • Foldable within Seconds for

Quick and Easy Storage• Hard Chromium Plated Piston

Rod and Pump Piston for Long Life• Built-in Safety Overload Valve• Lifting Hook Pivots 360°• Hand-Operated Dead-Man’s

Control

Engine Lifts

GM Engine Moving ToolSKU 511006 59 99THX419X • Fits GM Front Wheel Drive

Vehicles with Engine Torque Struts• Safely Holds Engine in Place• Extra Bolt Holes Provide Fit on All Vehicles• Includes Adapter 419A

SCAN FOR DETAILS

2 Hooks - 2 ChainsTwice the Adjustment Means

Faster, Easier AND Safer

1,100 Lbs. Engine Support SKU 512946 109 9924950 • 2 Screw Adjusters for Precise Positioning - Makes

Job Easier, Faster and Safer• Rubber Feet to Prevent Damage to

Vehicle and Ensure Stability• 1,100 Lbs. Capacity

3 Point Engine Support Bar SKU 133617 849924951 • Makes Removal of Transaxle Easy By Supporting Engine

of Front Wheel Drive Vehicles• Width Expands from 34-1/2" to a Full 61"• (2) 14" Adjustable Hook Screws• (2) 38" Braided Steel Cables• 700 Lbs. Capacity

Engine Leveler SKU 544802 39 9924831 REG. $49.99

• Great for Use with Engine Hoist or Engine Crane• Makes Engine Handling and Positioning Easier• Rated Capacity: 1,600 Lbs.

Engine Supports

Engine Stands

1,500 Lbs. High Reach Jack Stand with Foot PedalSKU 757078 13499 24847 • Min. Height: 52-1/2"• Max. Height: 81-7/8"• Provides Added

Support During Installation/Removal of Automotive Components

• Foot Pedal Pump Saves Time Adjusting Load

• Compact Design for Use in Limited Workspaces

• Durable Heavy Gauge Steel Construction

2 Ton Underhoist Jack StandSKU 757084 109 99 24849• Min. Height: 56-1/2"• Max. Height: 85-3/8"• Provides Added Support

During Installation/ Removal of Automotive Components

• Adjustment Pin Securely Supports Load in 5 Positions


1,500 Lbs. High Reach Jack StandSKU 757043 109 99 24848• Min. Height:

53-1/2"• Max. Height:

80-1/4"• Provides Added

Support During Installation/ Removal of Automotive Components

• Compact Design for Use in Limited Workspaces


2 Ton High Tripod Jack StandsSKU 901744 149 99 RANRJS2TH

• Perfect for Holding Drive Train or Exhaust Components in Position

• Capacity: 4,000 Lbs.• Low Height: 55"• Max. Height:

87"

Under Hoist Stands

4 Ton Fast Action Body Repair KitSKU 301327 129 9924820• Repair Kit Includes:

Hydraulic Pump, Hydraulic Ram, Four Extension Rods, a Rubber Ball Foot, and a Duckbill Hydraulic Spreader

• Also Includes: Snap Couplings, Threaded Connectors, and 6 Feet of Hydraulic Hose and a Variety of Attachments

10 Ton Fast Action Body Repair KitSKU 301328 1999924821 • Repair Kit Includes: Hydraulic Pump, Hydraulic

Ram, Four Extension Rods, a Rubber Ball Foot, and a Duckbill Hydraulic Spreader. Also Includes: Snap Couplings, Threaded Connectors, and 6 Feet of Hydraulic Hose and a Variety of Attachments

Body Repair

SAVE$10


877-AZTOOL1 / 877-298-6651 Hablamos Español AZtool1.com

28 Prices subject to change without notice. Please do not return purchases to the store. For information regarding warranty or repair and/or any questions or concerns, please call 1-877-AZTOOL1.

PREMIUM AUTOMOTIVE LIFT EQUIPMENT

Patented Technology: SINGLE PUMP TO CHASSIS

M E E T S A S M E P A S E 2 0 1 4 S A F E T Y S T A N D A R D SCUSTOMER SERVICE (888)332-6419

• Effortless air operation will greatly reduce operator fatigue and speed up the efficiency ofgarage work

PART #18204C

PART #41000C

PART #32225B

PART #32065B

19999

1,49999

• Fast and safe technology for professional mechanics

• Ideal to support the exhaust system, shock absorber and other vehicle components during under vehicle repair

• Two-stage chrome-plated rams maximize its high reach operated by a user-friendly foot pedal

• Unique release pedal provides safety in loweringthe load

• For collecting fluids that include motor oil, transmission fluid and coolant, water, and water based chemicalsfrom lifted vehicles

• Easily adjustable from ~48½” to 63”

• Durable, high-density polyethylene reservoir with bottom release valve

• 4 high quality 2”casters for easy maneuverability

• Sturdy, welded steel construction forsuperior safety and strength

• Heavy gauge, steel frame helps preventdistortion or twisting • Sturdy, welded steel

construction for superior safety and strength

• Counter-weighted pawl serves as a safe, secure locking device to prevent the load from accidentallydisengaging

2 TON TRIPOD AUXILIARY STAND

1,000 LBS. 2 STAGE TRANS. JACK

20 TON AIR BOTTLE JACK, FORGED BASE

8 GALLON OIL DRAIN

22 TON TRUCK STANDS PIN STYLE 6 TON HEAVY DUTY JACK STANDS

• Low profile design for extrawork space

• Six swivel casters for ease ofuse and mobility

• Thick padded cushions for extended comfort

400 LBS. CAPACITYLOW PROFILE CREEPER

11299

9999

PART #91000• Thick padded

cushions for extended comfort

• Fully upholstered pad• Six swivel casters

for ease of use andmobility

Z-CREEPER 450 LBS. CAPACITY

9999

PART #10125B

• Hydraulic system is protected from internaldamage by a patented by-pass mechanism

• Machined and polished cylinders with die-cut threads provide non-abrasive, leak-free, durableperformance

12 TON HYDRAULIC BOTTLE JACK

SKU 964651

SKU 964647

SKU 964657

SKU 939034

SKU 222744

SKU 964636

SKU 12650

22 TON AIR RETURN AXLE JACK

11299

• Compact, low profile design for maximum access, which fits easilyand safely between wheels of tandem axle vehicle

• Large steel wheels for easy positioning and smooth motion

SKU 202448PART #23226

1,99999

11499

6999

25999

29999

PART #89001

PART #33020SKU 818750

SKU 220406

PART #25055

*NO Magic Lift™ FUNCTION

PART #26030

PART #26017

PART #29038

29999

44999

23999

• 2.5 Ton Magic Lift™Service Jack

• 3 Ton Jack Stands

• All aluminumstructure providesstrength andstability

• Side framehandles allow foreasy carrying

• Aluminum/Steel design combineslightweight and strength for longevity

• Side frame handles allow foreasy carrying

• Dual piston speedy lift lightweightservice jack

• Innovative Magic Lift™design offers a quicklift for professionalperformance

LOW PROFILE SERVICE JACK & STAND COMBO

3 TON HYD. ALUMINUM JACK

1-1/2 TON ALUMINUM/HYBRID SERVICE JACK*

3½ TON LOW PROFILE SERVICE JACK

SKU 847101

SKU 847102

SKU 847097

SKU 847107

33999

SKU 202399

5999PART #91900

36" PLASTIC CREEPER • Ergonomic lightweight HDPE body• 300 lbs. capacity• 6 Oil resistant 2" swivel casters• Padded head rest• Easy carry handle

TOOLBOX CREEPER

• 450 lbs. Rated capacity• Steel frame construction• Extra thick seat cushion

• The wheel arm holds the tire at lift arm height and is handy with tire rotations andbrake jobs.

• Easy and safe for mechanicsto put on or take off tires from the vehicle.

• Avoid bending over to put down or pick up a tire.

WHEEL ARMSPART #92100SKU 573207

9999

HEAVY DUTY TOOL CARTSLIDING TOP AND LOCKING DRAWERS

SKU 203992

• Locking tool box with sliding top• Unique design allows the top to be used as a

work bench• 2 drawers and 1 base shelf for tool storage• Maneuvers easily around the shop or work area

PART #97431 239992 IN 1 SEAT-STOOL COMBO

9999PART #91305

PART #91400

• Rated seat Capacity: 350 lbs.• Rated Step Stool Capacity: 400 lbs.• Patent Pending rolling seat with built in stool•Tool Tray included

SKU 939028

PART #92450SKU 250704

MAX.: 14”MIN.: 3.5”

MAX.: 77.25”MIN.: 39.88”

MAX.: 24.13”MIN.: 15.5”

MAX.: 19.63”MIN.: 12”

MAX.: 15”MIN.: 9.88”

MAX.: 18.75”MIN.: 10”

MAX.: 76.75”MIN.: 67”

MAX.: 15.63”MIN.: 9.5”

MAX.: 18.13”MIN.: 4”

MAX.: 21”MIN.: 4”

MAX.: 20”MIN.: 3.5”



M E E T S A S M E P A S E 2 0 1 4 S A F E T Y S T A N D A R D SCUSTOMER SERVICE (888)332-6419

PART #B6350

• Innovative design of Fast Lift™ technology offers a quick lift for professional performance

• Swivel saddle provides easy jack positioning and user safety

SKU 344792

PART #BH5710

• Fast and safe product for professional mechanics

SKU 300796

PART #B65115 39999

• The 10 Ton capacity model gives you the extra muscle you need to get the job done right

• Snap-lock design for quick and easy assembly

10 TON PORTO-POWER® KIT

PART #BH5715

14999

• Foot pedal allows easy load movement

• Fast and safe product for professional mechanics

3/4 TON AUXILIARY STAND WITH FOOT PEDAL

PART #BH5030B

4999

• Counter-weighted pawl locks ratchet bar securely in place

• Sturdy, welded steel construction

• One piece, multi-position ductile iron ratchet bar

3 TON JACK STANDS

PART #B65114

• 4 Ton capacity gives you the pushing and spreading power you need to make fast and easy work of everyday repairs

• Snap-lock design for quick and easy assembly

4 TON PORTO-POWER® KIT

23999PART #B630JS

• Garage essentials in one convenient package

• 3 Ton capacity garage jack• 3 Ton jack stands (pair)

3 TON GARAGE JACK COMBO

SKU 964663

SKU 964658SKU 222493

SKU 30079729999

PART #HW93642 49999 7999

• U-joint release mechanism for precise load control

• Assembled in the US with US and global components

• In-line pump assembly assures long life and no off-center forces for ease in pumping, aligning and reduction of wear

• U-joint release mechanism for precise load control

• Dual purpose handle serves as carry handle and saddle column release

2 TON SERVICE JACK

16499

3,49999

4,49999

2,99999

• Dual purpose handle serves as carry handle and saddle column release

• Lifting trucks, trailers, and buses by the axle, differential, or frame

• Dual piston action provides speed to contact and power to lift

• Long chassis for hard to reach points

• Dual piston action provides speed to contact and power to lift

• Handle adjusts to three pumping positions

• T handle with release knob for ease of positioning and load control

• 2-12” pneumatic rear tires and 2-6” casters for easier transport and positioning under load

• Less maintenance with one large cylinder

• Longer reach

• Wishbone design allows unit more mobility

• Steel Tube Frame• 360° swivel casters

1 TON TRANS. JACK

• Compact, powerful design quickly lifts rated capacity

• Large 8" rubber wheels

• Specially coated ram prevents rust and extends jack life

• 3” extension INCLUDED

20 TON AXLE JACK

SKU 964622

2,69999

58999

1,89999PART #HW93733

PART #HW93718SKU 964631

SKU 208336

PART #HW93652

3 TON SERVICE JACKSKU 964623

PART #HW93503SKU 964601

PART #HW93506

PART #HW93662

PART #HW93690

PART #HW93667

SKU 964621

SKU 964626

SKU 964628

SKU 964627

3 TON JACK STANDS 6 TON JACK STANDS

10 TON AIR/MANUAL LONG CHASSIS SERVICE JACK

ALL HEIN-WERNER PRODUCTS CARRY A TWO YEAR MANUFACTURER’S WARRANTY.

4 TON AIR/MANUAL LONG CHASSIS SERVICE JACK

10 TON AIR OPERATED END LIFT

3/4 TON AUXILIARY STAND

13999

24999

SKU 939029

PART #4031

• 100% American Made• 3” Diameter wheels with gripping tires glide smoothly over shop floors• Capacity: 400 lbs.• Ground Clearance: 1¼”

THE BONE-STER TM

MECHANICS CREEPERSKU 972430

3½ TON FAST LIFT™ SERVICE JACK

9999

MAX.: 45.25”MIN.: 10.25”

MAX.: 46”MIN.: 12.5”

MAX.: 19.75”MIN.: 9”

MAX.: 26.5”MIN.: 5.5”

MAX.: 20”MIN.: 4.5”

MAX.: 25.50”MIN.: 6.50”

MAX.: 23.5”MIN.: 5.25”

MAX.: 19”MIN.: 12.13”

MAX.: 20”MIN.: 5.25”

MAX.: 18.5”MIN.: 5.5”

MAX.: 7.75”MIN.: 6.75”

MAX.: 80”MIN.: 55” MAX.: 80”

MIN.: 55”

MAX.: 25.75”MIN.: 16.25”

PART #HW93696A

1,99999

• Lifts the front or rear end of cars, vans, and light trucks

• Air operation with two-stage air valve

• Hydraulic damper and safety locks

2½ TON END LIFT SKU 964629

MAX.: 35.38”MIN.: 11”

877-AZTool1 877-298-6651Hablamos Español

AZtool1.com

DID YOU KNOW?STP oil is now available at AutoZone®. STP is a worldwide name that customers know and trust. Buy your STP oil and filters at your local AutoZone store.Contact Your AutoZone Commercial Sales Manager for Details

Documents

JACKS AND 877-AZTool1 HYDRAULICS · safety, quality and efficiency. As a total supplier, our wide product range gives you the optimal equipment for all types of lifting tasks. DK20Q