Upload
nguyendien
View
215
Download
0
Embed Size (px)
Citation preview
Jacket / Cover Heater
Features and Benefits Eliminate unnecessary time and effort in applying heat trace and insulation works Cost-efficient Compatible in most shapes and sizes
Typical Applications Heating and heat insulation of exhaust piping in semiconductor manufacturing
industries Heating and heat insulation of piping equipments; flange, valve, industrial hopper
etc Heating and heat insulation of tanks; drum, pail, chemical reaction tank, distillation
tank Heating of variety of vacuum devices Heat insulations of various equipments being used at cold areas Heating and heat insulation of complicated experiment and research equipments
Heater Type
Part Number
Part Number Maximum Heat Resistance Temperature TC-200 200℃ TC-400 400℃ TC-600 600℃ TC-1000 1000℃ TC-1200 1200℃
Standard Type
Pipe-shaped Type
Box Type
Velcro
Zipper Band
※Insulation cover without heating elements
String
Technical Structure
Materials
Structure Material ① Inner surface layer Silicone coated cloth, glass cloth,
non-asbestos cloth, alumina cloth etc ② Heating element Nickel chrome + E-glass double braid,
nickel chrome + alumina fibers double braid etc ③ Insulation layer Glass wool, Ceramic Felt ④ Outer surface layer Silicone coated cloth etc
① Inner surface layer ② Heating element ③ Insulation layer ④ Outer surface layer
Part Number
Part Number Maximum Heat Resistance Temperature
TH-200 200℃
TH-300 300℃
TH-500 500℃
Electrical Details Heater Details
Voltage(V) Power(W/m) Width(mm) Length(m)
Cable Length(m)
100 Standard Specs 200
30 15 1~5 0.5
Possible Production 24~240 5~200 10~50 ※ As requested
※ Depends on the electrical power Example of part number: TH200 – 10030 – 155 – R0.5
Type Voltage・Power Width・Length Cable Length
Technical Structure
Materials
Type MAX200℃
Structure Material ① Cable Non-combustible Teflon MAX250℃
Heating element Nickel chrome ②
Cover Non-combustible E-glass double braid MAX400℃ ③ Yarn E-glass MAX400℃ ④ Outer cover Glass sleeve MAX400℃
Cable Length Heater Length
Heating Element
Type MAX300℃
Structure Material ① Cable Non-combustible Nickel-Silica MAX400℃
Heating element Nickel chrome ②
Cover Non-combustible E-glass double braid MAX400℃ ③ Yarn E-glass MAX400℃ ④ Outer cover E-glass sleeve MAX400℃
Type MAX500℃
Structure Material ① Cable Non-combustible Nickel-Silica MAX400℃
Heating element Kanthal ②
Cover Alumina double braid MAX1200℃ ③ Yarn Alumina MAX1200℃ ④ Outer cover Alumina sleeve MAX1200℃
※ ②③Treated with silicon varnish
Part Number Part Number Type Outer Cover Max. Temperature
CHS180 S Type Silicon 180℃
CHP200 P Type PFA 200℃
Electrical Details Cable
Voltage(V) Power(W/m) Length(m) Output
Heater Length (m)
100 Standard Specs 200
30 0.5 1~5
Possible Production 24~240 5~200 As
requested
One side(S) Both
sides(W) ※
※ Depends on the electrical power Example of part number: CHS180 – 10030 – 5 – R0.5S
Type Voltage・Power Heater Length Cable Length
Technical Structure W type cable
S type cable
Materials
Type MAX300℃
Structure Material Remarks ① Cable Teflon MAX250℃
S type: Silicon MAX180℃ ② Outer Cover P type: PFA MAX200℃
Cable Length
Heater Length
Cable Length
Heater Length
Other Heater
Typical Application
・High temperature heating in various production line
・Heat test for high temperature products
・High temperature quartz tube heating
・Heat treatment of general chemical analysis
・R&D for various new materials
Product Summary Silicone rubber heater
The heating resistor is sandwiched between the silicone rubber sheets. Due to its flexibility and thin layer, it gives excellent thermal response. Plate Heater
A heater with mica sheet-insulated Nichrome wire, coated with flat stainless steel or bonderized steel.
Band Heater
A heater using mica sheet as insulator and applying it to cylindrical shaped body. Sheathed Heater
A coiled heating wire is inserted in the center of a metallic pipe and the gap is filled with electrically insulating material (MgO) at high density. Due to its high efficiency, it is considered as an economical heater.
Company Profile Company Name: TOYONAKA HOT LABORATORY CO.,LTD. Year Established: 1987 Business Type: Manufacturer Main Products: Variety types of hoses and heaters Head Office: Toyonaka-shi Osaka
Main Factory: Miyazaki
Employee number: 50 Management Certification: ISO9001:2008 President: Toshio Kawahara Operational Address: 209, 4-6-15, Ohomoriminamimachi, Ohta-ku,
Tokyo 143-0013, Japan TEL:+81-3-5737-7221 FAX:+81-3-6423-9375 E-Mail:[email protected]
Thank you for your interest in our products!
If you have any inquiries or comments, feel free to contact us!
[email protected] https://toyonakahot.com/