Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
jabra.com/stone3
User Manual
JABRA stone3
jabra
2
Contents1. welCoMe .......................................... 32. headset oVeRVIew ......................... 43. how to weaR .................................. 5
3.1 Change eaRgels
4. how to ChaRge the batteRy ....... 64.1 batteRy statUs
5. how to ConneCt ............................ 85.1 tURnIng on/off the headset
5.2 ConneCt wIth a blUetooth deVICe (fIRst tIMe PaIRIng)
5.3 ConneCt wIth a blUetooth deVICe (seCond tIMe PaIRIng oR Re-PaIRIng)
5.4 ConneCt wIth an nfC-enabled deVICe
6. how to Use ................................... 116.1 MUltIPle Call handlIng
6.2 lIst of VoICe CoMMands
6.3 lIst of VoICe gUIdanCe
7. UPdate fIRMwaRe .........................148. sUPPoRt ..........................................15
8.1 faq
8.2 how to CaRe foR yoUR headset
9. teChnICal sPeCIfICatIons ...........17
3
1. welCoMeThank you for using the Jabra Stone3. We hope you will enjoy it!
Jabra STONE3 fEaTurES
NFC technology Volume touch controls Voice controls HD Voice Wireless freedom - Up to 10m/33ft Noise Blackout™ 3.0
4
2. headset oVeRVIew
ja
bra
NFC
NOTE: All accessories are also available on jabra.com.
Extra EargelTM
USB cable
AC charger
Touch volume control panel
Microphone
Battery indicator
Bluetooth indicator
NFC zone
EargelTM
Light indicator
Charging socket
Battery display
Answer/End
Earhook
5
3. how to weaR
ja
bra
Wear the Jabra Stone3 on the right ear and enjoy the comfort.
3.1 CHANgE EARgELS
Choose between four ergo-designed eargels for optimal fit and comfort.
ja
bra
ja
bra
6
4. how to ChaRge the batteRy
Place the headset in the charger and connect either the AC power or USB cable to charge both the charger and the headset.
jabra
ja
bra
jabra
7
4.1 BATTERy STATUS
HEadSET baTTEry STaTuS
Talk TimE
20 min - 2 hours
Less than 20 min talk time
cHargEr baTTEry STaTuS
Talk TimE
More than 5.5 hours
2.5 -5.5 hours
Less than 2.5 hours
It takes approx. 3 hours to fully charge the headset and the charger.
8
5. how to ConneCt5.1 TURNINg oN/oFF THE HEADSET
ON: Push the headset out of the charger by pressing on the backside.Off: Insert the headset into the charger.
5.2 CoNNECT WITH A BLUETooTH DEVICE (FIRST TIME PAIRINg)
1. Take the headset out of the charger. The headset will automatically start up in pairing mode.
2. Follow the voice-guided pairing instructions to pair to your Bluetooth device.
9
5.3 CoNNECT WITH A BLUETooTH DEVICE (SECoND TIME PAIRINg oR RE-PAIRINg)
1. Take the headset out of the charger and turn off the headset.
2. Wear the headset and press and hold (5 secs) the answer/end button until you hear the pairing instructions.
3. Follow the voice-guided pairing instructions to pair to your Bluetooth device.
jabra
10
5.4 CoNNECT WITH AN NFC-ENABLED DEVICE
1. Ensure that NFC is enabled on your mobile device.
2. Take the headset out of the charger and turn off the headset.
3. Wear the headset, and press and hold (5 secs) the answer/end button until you hear the pairing instructions.
4. Hold the NFC device against the NFC zone of the charger (not the headset). Confirm the connection on your mobile device.
NFC
NOTE: NFC devices have NFC implemented in different ways. The size and sensitivity of the NFC zone and how to connect the headset may vary between devices.
NFC zone
11
6. how to Use
ja
bra
NFC
fuNcTiON acTiON
ja
bra
Answer call Tap or press the answer/end button
End call Tap the answer/end button
ja
bra
Reject call Double-tap the answer/end button
Redial last number
Double-tap the answer/end button when not on a call
ja
bra
Adjust speaker volume
Slide a finger up/down the Volume panel
6.1 MULTIPLE CALL HANDLINg
Touch volume control panel
Microphone
Battery indicator
Bluetooth indicator
NFC zone
EargelTM
Light indicator
Charging socket
Battery display
Answer/End
Earhook
12
The headset can accept and handle multiple calls simultaneously.
fuNcTiON acTiON
ja
bra
End current call and answer incoming call
Tap the answer/end button
Switch between held call and active call
Press and hold (2 secs) the answer/end button
Put current call on hold and answer incoming call
Press and hold (2 secs) the answer/end button
ja
bra
Reject incoming call Double-tap the answer/end button
6.2 LIST oF VoICE CoMMANDS
WHaT yOu caN Say WHaT iT mEaNS
Answer Answer incoming call
Ignore Reject incoming call
13
6.3 LIST oF VoICE gUIDANCE
click TO liSTEN WHaT yOu HEar
Power on
Power off
Welcome. you are now ready for pairing. go to the Bluetooth menu on your phone...
Pairing failed
Connected
Disconnected
Low battery
Call from...
Battery level is low
Battery level is medium
Battery level is high
14
7. UPdate fIRMwaReFirmware updates improve performance or add new functionality to Jabra devices.
HOW TO updaTE THE firmWarE
1. Download the latest firmware to your PC from the www.jabra.com/stone3 support page.
2. Take the headset out of the charger, and turn off the headset.
3. Connect the charger to your PC using the supplied micro-USB cable.
4. Press and hold (10 secs) the Answer/end button on the headset until the Bluetooth indicator turns yellow, and then release the button.
5. Insert the headset into the charger.
6. Run the firmware updater on your PC, and follow the instructions to update your headset.
15
8. sUPPoRt8.1 FAq
View the comprehensive FAq on Jabra.com/stone3.
Q Why do i hear crackling noises?A Bluetooth is a radio technology that is sensitive to
objects between the headset and the connected device. Ensure the headset and the connected device are within range (up to 10 meters or 33 feet).
Q What is the range of the headset?A The Jabra Stone3 supports the following maximum
ranges: 10m/33ft.
Q Why do i not hear anything?A you might need to increase the speaker volume, or
ensure that the headset is connected to a device.
Q i am having bluetooth connection problemsA Check your mobile device’s Bluetooth menu and
delete/forget the headset. Re-connect the headset to your Bluetooth device following the Bluetooth connection instructions.
16
8.2 HoW To CARE FoR yoUR HEADSET
Always store the headset with the power off and safely protected.
Avoid storage at extreme temperatures (above 45°C/113°F or below -20°C/-4°F). This can shorten battery life and may affect headset operation.
Do not expose the headset to rain or other liquids.
17
9. teChnICal sPeCIfICatIons
Jabra STONE3 HEadSET SpEcificaTiON
Weight: 33g (incl charger)
Dimensions: H 58 mm x W 50.7 mm x D 24.7mm
Microphones: 2 omni-directional microphones
Speaker: 10mm dynamic speaker
operating range: 10 m (33 ft)
Bluetooth version: 3.0
Paired devices: Up to 8, two connected at the same time (MultiUse™)
Supported Bluetooth profiles:
A2DP, Hands Free Profile (v1.6), Headset profile (v1.2), PBAP
Talk time: Up to 10 hours
Standby time: Up to 15 days
operating temperature: -10°C to 60°C (14°F to 140°F)
Storage temperature: -20°C to 45°C (-4°F to 113°F)
Pairing passkey or PIN: 0000
18
ReV
a
www.jabra.com
Made In ChInaModel: bte2
© 2013 gn netcom a/s (north america: gn netcom Us, Inc.). all rights reserved. Jabra® is a registered trademark of gn netcom a/s. all other trademarks included herein are the property of their respective owners. the bluetooth® word mark and logos are owned by the bluetooth sIg, Inc. and any use of such marks by gn netcom a/s is under license. (design and specifications subject to change without notice).
1.welcome2.headset OVERVIEW3.how to wear3.1Change eargels
4.how to charge the battery4.1battery status
5.how to connect5.1turning on/off the headset5.2CONNECT with a bluetooth device (FIRST TIME PAIRING)5.3CONNECT with a bluetooth device (SECOND TIME PAIRING OR RE-PAIRING)5.4CONNECT with an nfc-enabled DEVICE
6.how to use 6.1Multiple call handling6.2list of VOICE COMMANDS6.3list of voice guidance
7.update firmware8.SUPPORT8.1faq8.2How to care for your headset
9.Technical specifications
Button 1079: Button 1080: Button 1081: Button 1082: Button 1083: Button 1084: Button 1085: Button 1086: Button 1087: Button 1088: Button 1089: