Upload
lehuong
View
225
Download
0
Embed Size (px)
Citation preview
Order Toll-Free 800-365-7565Govt. Purchase Cards Accepted
ITW Binks Table of Contents
Spray Guns-AccessoriesHVLP Spray Guns ............................................................................................2Conventional and Additional Spray Guns ...................................................... 3-5Airless Twist Tips..............................................................................................6Airless Paint Spray Hose ..................................................................................6Spray Gun Extensions ......................................................................................7Spray Gun Cups ...............................................................................................8Tanks - PT ASME Code, Stainless Steel, Galvanized and Accessories ........9-11Pumps and Pump Packages .................................................................... 12-21Finishing Systems/Packages .........................................................................22Drum Covers and Agitators ............................................................................23Fluid Regulators .............................................................................................24HVLP Conversion Accessories ......................................................................25Spray Gun Accessories ............................................................................ 26-27Siphon Hoses and Ball Valves ........................................................................28Air Control Equipment Accessories ................................................................29Cartridge Respirators .....................................................................................30Understanding Pressure Drop ........................................................................31Premium Spray Finishing Air Hose .................................................................32FluidallTM Fluid Hose .......................................................................................33Specialized Hose Assemblies ........................................................................34Tubing ............................................................................................................35Hose/Tube Accessories..................................................................................36Adapters, Nipples, Swivels .............................................................................37
Order Toll-Free 800-365-7565Govt. Purchase Cards Accepted42
Spray Guns-Accessories
HVLP Spray Guns
MACH 1 SL (Slim Line) HVLP
Lightweight, top quality high performancespray gun.Body: Drop-forged anodized aluminumWeight: 16.5 oz.Air Inlet: 1/4” NPS (M)Fluid Inlet: 3/8” NPS (M)Fluid Passages: Stainless SteelFeed Type: Pressure/Siphon FeedPart Sheet: 2665Gun Repair Kit: 54-4278
MACH 1 HVLP
Full size lightweight spray gunBody: Drop-forged anodized aluminumWeight: 20.1 oz.Air Inlet: 1/4” NPS (M)Fluid Inlet: 3/8” NPS (M)Fluid Passages: Stainless SteelFeed Type: Pressure/Siphon FeedPart Sheet: 2463Gun Repair Kit: 54-3605
M1-G HVLP
The M1-G HVLP gravity feed spray gun notonly complies with all air quality regulations,but also atomizes and spray as quickly as aconventional air spray gun.Body: Drop-forged aluminumWeight: 21.9 oz.Air Inlet: 1/4” NPS (M)Feed Type: GravityPart Sheet: 2650Gun Repair Kit: 54-4367
MACH 1A & 1AR HVLP
The MACH 1A Automatic offers totalcontrol of atomizing air pressure, sideport air, fluid flow and spray patterns inproduction settings which requireautomatic equipment.
The MACH 1AR Automatic is ideal forapplication where visual indication of fluid needle location isessential. It is pneumatically activated for application in avariety of automated spray systems.
Cub SLG and Cub SL Touch-Up Guns
The Cub SLG (gravity feed) and the Cub SL (siphon/pressure)are the finest touch-up and specialty HVLPcoating guns.Cub SLGBody: Drop-forged anodized aluminumWeight: 15.2 oz.Air Inlet: 1/4” NPS (M)Feed Type: GravityPart Sheet: 2735
Gun Repair Kit: 54-4478
Cub SLBody: Drop-forged anodized aluminumWeight: 12.3 oz.Air Inlet: 1/4” NPS (M)Fluid Inlet: 1/4” NPS (M)Fluid Passage: Stainless SteelFeed Type: Pressure/Siphon FeedPart Sheet: 2734Gun Repair Kit: 54-4478
43
Order Toll-Free 800-365-7565Govt. Purchase Cards Accepted
Spray Guns-Accessories
Conventional Spray Guns95 Gun
High production spray gun.Body: Drop-forged anodizedaluminumWeight: 27 oz.Air Inlet: 1/4” NPS (M)Fluid Inlet: 3/8” NPS (M)Fluid Passages: Stainless SteelFeed Type: Pressure/Siphon FeedPart Sheet: 2625Gun Repair Kit: 54-3577
2001 Gun
Compact, lightweight and wellbalancedBody: Drop-forged anodizedaluminumWeight: 24 oz.Air Inlet: 1/4” NPS (M)Fluid Inlet: 3/8” NPS (M)Fluid Passages: Brass/Electolessnickel platedFeed Type: Pressure/Siphon FeedPart Sheet: 2316Gun Repair Kit: 6-229
Five Easy Ways to Order from Fluid-Air Products Inc.
CALLToll-Free
800-365-7565to order
MAILyour order
12834 Gravois Rd.St. Louis, MO 63127
FAXyour order
314-729-7099
E-MAILyour order
WEBSITEVisit our site
www.fluidair.comand link to
www.gsa.govfor on-line ordering
Order Toll-Free 800-365-7565Govt. Purchase Cards Accepted44
Spray Guns-Accessories
Additional Spray Guns
95A Automatic Guns
Conventional style air spraygun that is pneumaticallyactivated for applications withreciprocating, rotary, spindlemachines, and in stationaryspray gun set-ups
Body: Drop-forged anodized aluminumWeight: 20.5 oz.Cylinder Air Inlet: 1/4” NPS (M)Cylinder Air Pressure: 40 PSI Min./100 PSI Max.Atomization Air: 1/4” NPS (M)Fluid Inlet: 3/8” NPS (M)Fluid Passages: Stainless SteelFluid Pressure: 100 PSI Max.Mounting Hole: 1/2”Part Sheet: 2641Gun Repair Kit:: 54-3579
Model 95 AVSame features as Model 95A Spray Gun, but a tungsten carbidefluid nozzle and needle are used. For use with abrasive fluids.
Model 95ARSame features as Model 95A Spray Gun, but has ratchet typeadjustable needle valve control. Recommended for installationsrequiring numerous fluid control adjustments.
Airless 1
Heavy duty professional spray gun for applying variousmaintenance and decorative finishes. This lightweight,
aluminum-bodied, drop-forged,spray gun features a stainlesssteel head and fluid passages,ball-type fluid valve, removablevalve assembly, tungstencarbide seat, and built-indiffuser.
A large rest pad at the back ofthe spray gun gives excellentoperator comfort, in-the-handsupport and balance. The
thumb-operated safety trigger lock permits one hand locking,unlocking, and triggering. A tip guard is included for addedsafety. Spray tip not included. Maximum operating pressure is6000 PSI.Part Sheet: 2340
Model 7E2 - Heavy Duty Gun
Designed for continuous spraying ofheavy bodied fluids. Drop-forgedaluminum body. Replaceable plateddrop-forged brass head. Adjustablefloating fluid needle valve. Stainlesssteel air valve cartridge. Trigger hashardened steel wear plate. Adjustablespray pattern.Air Inlet: 1/4” NPS (M)Fluid Inlet: 1/2” NPS (M)Weight: 1 lb. 14 oz.Part Sheet: 2670
Model 140B - Heavy Duty Gun
Use for sprayingsolvents to cleanengines and othermachinery. Brass body.Ten inch nozzle/tubelength. Has flexibletubing with hose clampfor siphoning solvent from container. Requires 14 CFM air at50 PSI. 1/4” NPS (m) air inlet.Part Sheet: 1191
Mode1 190 - Air Blow Gun
Use for dusting, drying, removingchips, etc. Pistol grip style withaluminum diecast body. Nozzlenumber 60-40 (complies withparagraph 50-204 Walsh-Healy Altand OSHA where air inlet does notexceed 100 PSI) with 1/16” orificeis standard. Optional 5 1/2”extension (60-41) available. 1/4”NPT (m) air inlet. Air consumption3 1/2 CFM at 50 PSI.Part Sheet: 1108
45
Order Toll-Free 800-365-7565Govt. Purchase Cards Accepted
Spray Guns-Accessories
Additional Spray Guns (cont’)
Adjust-a-Fan Orifice RangeModel No. Material to be sprayed (inches)
54-3280 Lacquers and Stains .007 to .01954-3285 Latex and Enamels .011 to .02654-3290 High Builds .017 to .03554-3295 Extremely Heavy .021 to .054
Airless 1 Spray GunThe Binks Airless 1 spray gun is aheavy-duty professional spray gun.Short, two finger trigger and low pulleffort give a natural feel. A thumb operatedsafety trigger lock permits one hand lockingand unlocking.
Body: Drop-Forged Anodized AluminumWeight: 27 OuncesAir Inlet: N/AFluid Inlet: 1/4” NPS (M)Fluid Passage: Stainless SteelFeed Type: High Pressure - 6000 psi max. workingPart Sheet: 2340Gun Repair Kit: 6-236
AccessoriesEnhance the versatility of your Airless 1 Gun with Binksservice-proven accessories.Twist-Tip Nozzle CleanerLight-weight, stainless steel, Twist-tip assembly makes nozzlecleaning easy.Adjust-a-FanSpray patterns from 4 to 22 inches wide.Nozzle ExtensionsAttache to airless guns for access to hard-to-reach areas.Airless Gun Swivel72-780 1/4 NPS (m) x 1/4 NPS (f) Swivel Nut.
AA4000 Air Assisted Airlesss HVLP
The unique tip and air cap design of the new Binks AA 4000 AirAssisted Airless HVLP SprayGun allows operators to use
lower fluid and air pressurethan the competition to achieve
an exceptionally fine finish.Maximim Fluid Pressure: 4000
PSI / 275 barMaximum Air Pressure: 100 PSI /
6.8 barBody: Forged aluminum
Weight: 16 oz.Air Inlet: 1/8” NPT (M) x 1/4” NPS
(M)Fluid Inlet: 1/4” NPS (M) Thread
Fluid Passages: Stainless SteelFeed Type: Siphon FeedPart Sheet: 2776
AA1500 Air-AssistedAirless Spray GunThe unique tip and air cap designof this new spray gun allowsoperators to use lower fluid andair pressure than the competitionto achieve a superior finish.
Max. Fluid Pressure: 1500 psi/105 barMax. Air Pressure: 100 psi/6.8 barGun Body: Forged AluminumFluid Path: Stainless SteelFluid Shut Off Type: Stainless Steel BallStandard UHMW Seat or Optional TungstenCarbideFluid Inlet Size: 1/4” NPS (m) ThreadAir Inlet Size: 1/8” NPT (m) x 3/8” O.D.Push-In - Tube Fitting or D.M. NippleGun Weight: 16 oz./500 g
Wren OutfitsSet No. 1 Includes airbrush,1/2 fl. oz. color bottle59-10022 “C” AirbrushSet No. 2 Includes airbrush, 1/4, 1/2 and 2 fl. oz. color bottleassemblies, 6’ lightweight vinyl hose with connections andcase.59-10006 “B” Airbrush
Features include: Singleacting style; simple tooperate; easy to maintain;versatileWren Outfit includes:Airbrush, 1/4, 1/2 and 2 fluidoz. color bottle assembliesand 59-60 (6 ft.) of lightweight vinyl hose with connections,packed in an attractive, clear plastic case
Wren AirbrushSingle action style. Air and fluidare delivered simultaneously.
Order Toll-Free 800-365-7565Govt. Purchase Cards Accepted46
Spray Guns-Accessories
Airless Twist Tips
Surface Coating Fan Width Orifice Size(in inches) .009 .011 .013 .015 .017 .019 .021 .023
Wood Interior Stain, Sanding 6” 309 311 313 315 - - - -Cabinets, Paneling Sealer, Lacquer 8” - - 413 - - - - -
Varnish, Shellac 10” - - - - - - - -Enamels 12” - - - - - - - -
Interior Walls Latex, Vinyl 6” - - 513 - - - - -Ceilings, Drywall Acrylic 8” - - - 415 417 419 - -Plaster 10” - - - 515 517 519 - -
12” - - - 615 617 619
Overhang Primers, 6” - - - 315 - - - -Enamels 8” - - - 415 417
10” - - - 515 517 - - -12” - - - - - 619 - -
Masonry Block Vinyl, Acrylic 6” - - - - - - - -Stucco, Concrete Latex, Oil Base 8” - - - - 417 - - -
Alkyds 10” - - - 517 519 52112” - - - - - - 621 -
Wood Exterior Exterior, Stains 6” - - - - - - - -Shingle Siding, Latex, Vinyl 8” - - - - - - - -Shiplap Acrylic 10” - - - - 517 519 521
12” - - - - - - 621
Open Joist MIL White 6” - - - - - - - -Ceiling Areas HI Build 8” - - - - - - - -
10” - - - - - 519 - -12” - - - - - - 521 523
State of the art twist tip assemblies to fit all brands of airless guns. Binks twist tip assemblies can also be used as directreplacements for the most popular brans of airless twist tips on the market. Binks twist tips meet all the needs ofresidential, commercial and industrial painting contractors. High quality tungsten allows for non-distorted spraypatterns and high paint volume output before tip replacement is necessary. The chart at below reflects the mostcommon tips for the professional painting industry.
Airless Paint Spray Hose
BASE RETAINERSAssembly 454-3 454-5 454-6Number 3/4-20(B) 7/8-14(G) 11/16-16(F)
Binks Binks, Graco, AMSpray, SprayTitan, Wagner Tech, Wagner
Ordering: For twist tips add the prefix 454-to size tipselected. For example, if you select 517, order as 454-517.Flat tips also available to order add 9-as a prefix. Forexample, if you select 413, order as 9-413.
Hose I.D. 1/4”Connection Thread: 1/4” NPS (f)Hose Connection: Swivel both endsSpring Guards: Both ends
Static conductingPolyurethane coverNylon inner tube
Reinforcement: Braided textile yarnOperating Temp: (0oF to + 200oF)Min. Bend Radius: 2.5 In.Working Pressure: 3,300 psiBurst Pressure: 13,200 psi
Airless HoseSize 50 FT. Bulk Package (100 Units 71-3531) Connector1/4” 71-3531 72-691 1/4” NPS
Size 30” Whip Connector3/16” 71-8360 Assembly Only 1/4” NPS (F) x
1/4” NPS (M)
47
Order Toll-Free 800-365-7565Govt. Purchase Cards Accepted
Spray Guns-Accessories
Spray Gun Extensions
CLEARANCEMODEL DIAMETER NOZZLE SET-UP OPTIONAL LENGTHS FOR GUN PART SHEET
(INCHES) (INCHES) MODEL REFERENCE
EA 1 3/4 Std. External or Internal Mix 9, 15, 24, 36 2001 136895, 95A 2659, 2660
EB 3 Std. External or Internal Mix 6, 12, 18, 24 2001 137095, 95A 2659, 2660
EN 2 1/2 Std. External or Internal Mix 6, 12, 18, 24 2001 137236, 48, 60, 72, 84 95, 95A 2659, 2660
C 3/4 Circular (360o) 6, 9, 12, 15, 18, 24, 2001 1367, 2082HC� 30, 36, 48, 60, 72, 84 95, 95A 2659, 2660
SC 3/8 Circular (360o) 9, 12, 18, 27 2001 132833, 39, 51, 63, 75, 87 95, 95A 2659, 2660
52-1382 1 3/8 Special for Pipe Interior 1/4 in. Pipe not included Gun notCircular 360o required
� High volume material flow
90o
Five Easy Ways to Order from Fluid-Air Products Inc.
CALLToll-Free
800-365-7565to order
MAILyour order
12834 Gravois Rd.St. Louis, MO 63127
FAXyour order
314-729-7099
E-MAILyour order
WEBSITEVisit our site
www.fluidair.comand link to
www.gsa.govfor on-line ordering
Order Toll-Free 800-365-7565Govt. Purchase Cards Accepted48
Spray Guns-Accessories
Spray Gun Cups
Pressure Cups
Steadi-Grip 2 Cups
Model 80-350SG-2 (Steadi-Grip 2) Two Quart PressureCupPart Sheet: 2658
Model 80-351SG-2 (Steadi-Grip 2) Two QuartPressure Agit CupPart Sheet: 2658
Model 80-228Two Quart “Steadi-Grip”with handle. Weight: 3.5 lbs.Part Sheet: 1619
Model 80-270Fifty ounce stainless steelpressure cup
Model 80-300One Quart
stainless steel pressure cup and 15PSI regulator
Model 80-210One Quart. Furnished with pressureregulator and gauge 50 PSI max.Shipping weight 3 lbs.Part sheet: 1149
Siphon Cups
EZ2 Solvent Saver Cup
Cup features exclusive non-stick coatinginside and out that wipes clean inseconds. Fits Spray Gun Models 95,2001, and the MACH 1 Series ofhandguns.Model 81-375One Quart Drip Proof
Model 81-575One Quart StandardPart Sheet: 2378
Model 81-350One-Quart DripProof clamp type with extravent tube. Weight 16 ozs. 3/8” NPS (f)Part Sheet: 2250
Model 81-540Eight Ounce clamp type.Shipping Weight 8 oz. 1/4” NPS (F)Part Sheet: 126172-55 Adapter for 3/8” NPS (f)connection to spray gun
Model 81-543 (not shown)Stainless steel eight ounce 3/8” NPS (f) outletPart Sheet: 2679
Accessories for Steadi-Grip 280-355 Disposable liner for 80-350 and 80-35180-356 Qty. pack of 12 disposable liners for 80-350 and 80-35180-392 Thiokol gasket for 80-350 and 80-351
Model 81-550One Quart clamp-type. Shippingweight 16 ozs, 3/8” NPS (f)Part Sheet: 2250
Model 82-361 (not shown)One Quart stainless steel
49
Order Toll-Free 800-365-7565Govt. Purchase Cards Accepted
Spray Guns-Accessories
PT ASME Code TanksNew-Economical
ASME certification makes the Binks PT Series the only code PT tanks available in the workplace that meet OSHA regulations forusing flammable and combustible materials.
Stainless Steel and Zincfor Waterborne Coatings
Ideal for waterborne coatings whenused with a disposable tank liner. 300grade stainless steel lid and all wettedparts in lid assembly including: fluidtube, lid bushing, outlet elbow andfitting, and agitator shaft. Zinc platedtank shell.
Stainless Steel Lid and ZincPlated Tank Shell
Stainless steel lid, including all wettedparts; tank shell is zinc plated
AIR FLUID UP TO 2.8 GALREGULATION AGITATION 83C
Single Reg No Agitation 83Z-210
Double Reg No Agitation 83Z-220
Single Reg Std. Agitation(D) 83Z-211
Double Reg Std. Agitation(D) 83Z-221
Zinc Plated for Solvent-BasedCoatings
Ideal for solvent-based coatings.Optional disposable tank liner. Zincplated lid and all wetted parts in lidassembly including: fluid tube, lidbushing, outlet elbow and fitting, andagitator shaft. Zinc plated tank shell.
Zinc Plated Lid and Tank ShellZinc Plated Throughout, including Lid,Wetted Parts and Tank Shell
AIR FLUID UP TO 2.8 GALREGULATION AGITATION 83C
Single Reg No Agitation 83C-210
Double Reg No Agitation 83C-220
Single Reg Std. Agitation(D) 83C-211
Double Reg Std. Agitation(D) 83C-221
SpecificationsMaximum Working Pressure ..... 80 PSI
Fluid Outlet .......................... 3/8” NPS
Air Inlet ................................ 1/4” NPS
Binks Disposable Tank LinersFor 83C and 83Z Binks tanks use either the 2.8 gallon tank liner
PT-78-K10, quantity of 10 liners (1 bag of 10) or use the 2.8 gallon tank liner
PT-78-K60, quantity of 60 liners.
Binks new stainless and zincASME certified PT Series Tanks areeconomical and designed for use withwaterborne and flammable materialsthat can be applied at less than 80 PSI.
All PT Series tanks feature a2.8 gallon capacity and low profiletank design which accepts U.S. andCanadian one-gallon pails.
Order Toll-Free 800-365-7565Govt. Purchase Cards Accepted50
Spray Guns-Accessories
Stainless Steel TanksYour Best Long-Term Value
Binks Stainless Steel Pressure Tanksare suitable for virtually all fluids andsolvents. They are ASME certified andpermanently labeled for 110 PSIGmaximum working pressure.
Tanks and lids are constructed ofheavy gauge 304 stainless steel and areelectropolished. All models areequipped with top outlet and bottomoutlet plug, which can be adapted forbottom outlet
Additionally, these tanks are fittedwith 100% stainless steel non-corrosiveand non-corroding wetted parts
SpecificationsMaximum Working Pressure ... 110 PSI
Fluid Outlet, Top .................. 3/8” NPS
Fluid Oulet Plug, Bottom ........ 1” NPT
Air Inlet ................................ 1/4” NPS
Ideal for Waterborne CoatingsBinks Stainless Steel pressure tanks aredesigned to prevent corrosion-contamination, an inherent problemwith waterborne coatings. These tanksare all stainless steel, including fittings,and should be used with a Binksdisposable liner for maximum cleanli-ness. Material handling componentssuch as fluid regulators, filters and
All stainless steel tanks andlids are precison crafted of heavygauge 304 stainless and areelectropolished. All models areequipped with a bottom outlet plug.Additionally, these tanks are fitted with100% stainless steel non-corrosive andnon-corroding wetted parts.
Binks stainless steel pressuretanks are designed and built to preventcorrosion-contamination, an inherentproblem with waterborne coatings. Formaximum cleanliness, use with Binksdisposable tank liners.
Binks 11.8 gallon tanksaccept standard and imperial 5-gallonshipping pails. 2.8-gallon tanks accept1-gallon pails
agitators should also be of stainlesssteel. We also recommend you usehose and tubing connections/fittingsmade of stainless steel, nylon or brass.
Other ConsiderationsWaterborne coatings are shear
sensitive to being stirred and pumped.Stirring and pumping can degradesome waterborne coatings. Binkspumps, however, are designed forextremely low shear characteristics.A Binks oscillating agitator is recom-mended for keeping pigment insuspension without degrading thematerial. Binks fluid regulators andfilters are also recommended for theirminimal low shear characteristics.
Bottom OutletConversion Kits
These fittings allow a standard top outlettank to feed from the bottom by removingthe plug in the bottom port. Available instainless steel only.
TANKS STAINLESS STEELCAPACITY PART NO. SHIP WT.
2.8 GAL QMS-435 3 LBS.
11.8 GAL QMS-443 4 LBS.
19.8 GAL QMS-443 4 LBS.
Stainless SteelBottom outlet plug and opening in skirt standard
SMALL TANK MEDIUM TANK LARGE TANK
AIR FLUID UP TO 2.8 GALLONS UP TO 11.8 GALLONS* UP TO 19.8 GALLONSREGULATORS AGITATION 83S 83S 83S
Single Reg No Agitation 83S-210 83S-1010 83S-1510Double Reg No Agitation 83S-220 83S-1020 83S-1520Single Reg Std. Agitation 83S-211 (D) 83S-1013 (I) 83S-1513Double Reg Std. Agitation 83S-221 (D) 83S-1023 (I) 83S-1523Single Reg Opt. Agitation 83S-213 (I) 83S-1016 (R) 83S-1516
When combined with the use of disposable liners, there is no moreeconomical way to run a paint operation for most applications.
For 83S-200 Binks tanks use either the 2.8 gallon tank liner PT-78-K10, quantity of 10 liners (1 bag of 10) or use the 2.8 gallontank liner PT-78-K60, quantity of 60 liners. For 83S-1000 Binkstanks use the 11.8 gallon tank liner PTL-412-K8, quantity of 8liners. For 83S-1500 Binks tanks use the 19.8 gallon tank linerPTL-415-K10, quantity of 10
liners.(D) - Direct Drive Agitator: Uses direct mount air mount and air adjustingvalve.(I) - Indirect Drive Agitator: Uses Motor coupled to gearbox for highertorque at lower speeds.(R) - Reciprocating Agitator: Self-Reversing Air Motor for efficient mixingand reducing cavitation.* - Binks 11.8 gallon tanks accept standard and imperial 5-gallon shippingpails.NOTE: The air regulator(s) and gauge(s) are shipped inside the tank toprevent damage in shipping.
51
Order Toll-Free 800-365-7565Govt. Purchase Cards Accepted
Spray Guns-Accessories
Galvanized TanksIdeal for Most Applications
Galvanized steel tanks are primarilyused with non-corrosive materials.Constructed with a heavy pressed steellid and forged steel clamps, galvanizedtanks are equipped with top outlet andbottom outlet plug, which can beadapted for bottom outlet. The bottomoutlet is recommended for heavy,viscous materials such as emulsifiedasphalts, cut-back asphalts, rubbercompounds, etc.
SpecificationsMaximum Working Pressure ... 110 PSI
Fluid Outlet, Top .................. 3/8” NPS
Fluid Oulet Plug, Bottom ........ 1” NPT
Air Inlet ................................ 1/4” NPS
Binks galvanized tanks are built to the highest quality standards. Ourteam of experts - engineers, designers, technicians and customer service profession-als - is constantly working to bring you the quality, efficiency, performance andvalue you expect from one of the world’s most recognized spray finishing brands.
Binks galvanized tanks are primarily used with non-corrosive materials.Constructed with a heavy pressed steel lid and forged steel clamps, galvanized tankshave ports for both bottom and top fluid outlets.
All galvanized tank models are ASME certified for working pressure. Lidsdisassembled easily-no special tools are required-and all models are easy to serviceand clean.
Bottom OutletConversion Kits
These fittings allow a standard top outlettank to feed from the bottom by removingthe plug in the bottom port. Available instainless steel only.
TANKS STAINLESS STEELCAPACITY PART NO. SHIP WT.
2.8 GAL QMS-435 3 LBS.
11.8 GAL QMS-443 4 LBS.
19.8 GAL QMS-443 4 LBS.
Galvanized SteelBottom outlet plug and opening in skirt standard
SMALL TANK MEDIUM TANK LARGE TANK
AIR FLUID UP TO 2.8 GALLONS UP TO 11.8 GALLONS* UP TO 19.8 GALLONSREGULATORS AGITATION 83G 83G 83G
Single Reg No Agitation 83G-210 83G-1010 83G-1510Double Reg No Agitation 83G-220 83G-1020 83G-1520Single Reg Std. Agitation 83G-211 (D) 83G-1013 (I) 83G-1513Double Reg Std. Agitation 83G-221 (D) 83G-1023 (I) 83G-1523Single Reg Opt. Agitation 83G-213 (I) 83G-1016 (R) 83G-1516
When combined with the use of disposable liners, there is no moreeconomical way to run a paint operation for most applications.
For 83G-200 Binks tanks use either the 2.8 gallon tank liner PT-78-K10, quantity of 10 liners (1 bag of 10) or use the 2.8 gallontank liner PT-78-K60, quantity of 60 liners. For 83G-1000 Binkstanks use the 11.8 gallon tank liner PTL-412-K8, quantity of 8liners. For 83G-1500 Binks tanks use the 19.8 gallon tank linerPTL-415-K10, quantity of 10
liners.(D) - Direct Drive Agitator: Uses direct mount air mount and air adjustingvalve.(I) - Indirect Drive Agitator: Uses Motor coupled to gearbox for highertorque at lower speeds.(R) - Reciprocating Agitator: Self-Reversing Air Motor for efficient mixingand reducing cavitation.* - Binks 11.8 gallon tanks accept standard and imperial 5-gallon shippingpails.NOTE: The air regulator(s) and gauge(s) are shipped inside the tank toprevent damage in shipping.
Order Toll-Free 800-365-7565Govt. Purchase Cards Accepted52
Spray Guns-Accessories
Tank AccessoriesIndirect Air Motor Drive
Standard duty,smooth running withgear reducer, 1/4 hp,15:1 ratio, 20 to 120RPM. Includesthrottling valve,
fittings, and hose for connection to airsupply on tank lid. Air consumption:Approximately 6 CFM@50 RPM. ModelQS-5012. For 2.8, 11.8 and 19.8 gallontanks only.
Agitator DrivesStandard Model 31-116
Air Motor Drive Unitwith gear reducer: 1/2H.P., 20:1 Ratio, 15 to90 RPM output.
Shipping weight 20 lbs. Part Sheet 1214.For 30 and 60 gallon tanks only.
Model 31-237
Oscillating Air Motor.1-70oscillations/min. 400inch lbs. Torque at 80
psi. Shipping weight 15 lbs. Part Sheet2014. For 30 & 60 gallon tanks only.
Heavy Duty Model 83-2476
Air Motor Drive Unit with gear reducer.1 H.P., 30:1 Ratio, 15 to50 RPM output.Shipping weight 20 lbs.Part Sheet 1622. For 30& 60 gallon tanks only.
Direct Drive AgitatorAir-powered direct drive agitatorassembly with 1/4 hp air motor and a
three-bladedpropeller to keepmaterials mixed insuspension, evenhigh solids. Use ontwo gallon models.
Must order air motor and shaft sepa-rately.
83Z Series Stainless SteelModel PT-427 - air motorModel PT-419 - shaft assembly
83C Series Zinc PlatedModel PT-418 - air motorModel PT-428 - shaft assembly
83S and 83G SeriesRefer to part sheets on tank
Premium Spray Finishing Air HoseAssemblies and Connections
SIZES LENGTH HOSE ASSEMBLY BULK HOSE CONNECTION TYPE OF CONNECTIONI.D. OF HOSE PART NO. NUMBER THREAD SIZE CONNECTION PART NO.
5/16” 25 ft. 71-1205 71-131 1/4” NPS (F) three piece reusable 72-13175/16” 50 ft. 71-1206 71-131 1/4” NPS (F) three piece reusable 72-13173/8” 25 ft. 71-1355 71-132 1/4” NPS (F) three piece reusable 72-13253/8” 50 ft. 71-1356 71-132 1/4” NPS (F) three piece reusable 72-1325
Fluid AllTM Fluid Hose Assemblies and ConnectionsSIZES LENGTH HOSE ASSEMBLY BULK HOSE CONNECTION TYPE OF CONNECTIONI.D. OF HOSE PART NO. NUMBER THREAD SIZE CONNECTION PART NO.
3/8” 25 ft. 71-3303 71-282 3/8” NPS (F) three piece reusable 72-13283/8” 50 ft. 71-3304 71-282 3/8” NPS (F) three piece reusable 72-1328
Lid GasketsGASKET 2.8 GAL 11.8 GAL. 19.8 GAL 2.8 GAL. 30 GAL. 60 GAL.MATERIAL GALV. OR SS GALV. OR S.S. GALV. OR S.S. P.T. TANK GALVANIZED GALVANIZEDPART NO. PART NO. PART NO. PART NO. PART NO. PART NO. PART NO.
Santoprene® QMS-80-1 QM-1458-1 QM-1458-1 PT33-1 -Thiokol ® - - - - 83-2120 83-2122Rubber - - - - 83-2121 83-2123
Binks now offers Santoprene® lid gasket in place of the standard Thiokol® gasket. Injectionmolded of new hi-tech materials, Santoprene® is highly chemical resistant.
Air Regulator Assembly Kits
Model QMS-436: One gauge, oneregulator. Converts single regulation todual.Model QMS-4006: One gauge, oneregulator. Regulates and indicates tankpressure.Model QMS-4007: Two gauges, tworegulators. Controls tank pressure andatomization air pressure to gun.Model HAR-511: Regulator only (forfluid pressure).Model HAR-507: Second regulator fortanks with one regulator.Model GA-288: Gauge only, range0-160 psi (for fluid).Model GA-333: Gauge only, range0-100 psi (for air).
53
Order Toll-Free 800-365-7565Govt. Purchase Cards Accepted
Spray Guns-Accessories
“Pogo” Pump
Specifications & ConstructionLower Pump Material 316 SSPump Rod Material 316 SSCylinder Material Stainless SteelPacking Material UHMW PolyethyleneMotor Diameter 2”Stroke 6”Air Inlet 1/4” NPT (f)Material Inlet Immersed (no Threads)Material Outlet 1/2 NPT (f)Weight 19 lbs. (8.6
kgs.)Weight (stub) 16 lbs. (7.3 kgs.)
Part NumbersAir Control 41-11430Bare Pump 41-11431Air Motor 41-11432Air Motor Repair Kit 41-11433Fluid Section 41-11434Stub Fluid Section 41-11435Fluid Section Repair Kit 41-11436Stub Bare Pump 41-11437
Infinity “Pogo” Pump
Specifications (Stainless)Lower Pump Material 316 SSPlunger Material 316 SSCylinder Material Stainless SteelPacking SetUHMW PolyethyleneMax. 120oF Fluid Inlet Temp.Max. 180oF Fluid Inlet Temp.Weight Drum 19 lbs. (8.6 kgs)Stub 16 lbs. (7.2 kgs)
Part Number (Both SS Pumps)Air Motor 873008Air Motor Repair Kit 861034Lower Motor Assembly (821300) 873009
SS Stub 873200Lower Pump Repair Kit (same) 861089Optional Teflon Packing 861038
Specifications (Carbon Steel)Lower Pump Material Carbon SteelPlunger Material Carbon Steel (chrome plated)Cylinder Material Carbon SteelPacking Set UHMW Polyethylene
Max. 120o Fluid Inlet Temp.Max. 180oF Fluid Inlet Temp. Optional Packing
Weight 12 lbs. (5.4 kgs)
Part Numbers (Carbon Steel)Air Motor 873008Air Motor Repair Kit 861034Lower Pump Assembly 873010Lower Pump Repair Kit 861035Optional Teflon Packing 861036
Recommended AccessoriesAir Controls 41-15931Muffler 873191Wall Mount 8731841:1 Drum Pump Carbon Steel 812306
Gemini Diaphragm Pump
Technical SpecificationsGemini 1/2” Series Bare PumpModel Number:135-100
135-150Body Construction: SS Filled AcetalGround Wire: 135-74Free GPM: 135-100 (7 GPM)
135-150 (13 GPM)Principal Use: Multi Gun Supply/Multi Gun Supply or Fluid TransferPart Sheet: 135-100-2498
135-150-2561
Pumps
Order Toll-Free 800-365-7565Govt. Purchase Cards Accepted54
Spray Guns-Accessories
Comet Hi-Vol (2.5:1) Pump UnitModel Number: 41-11495Includes . . .41-3311 Gear Drive Agitator41-11459 Air Control41-2414 Drum Cover Assembly41-5024 Comet Hi-Vol Pump
Typical Applications:This complete package is designed for open top55 gallon drums to be used on a multi-gunrecirculating system. For short distances, addfluid hose, fluid regulator, and spray gun. For long systems,add the appropriate “drops”, fluid regulators and spray guns.
Pumps (cont’)
ConstructionPart # Body Seat Ball Diaphragm818820 Aluminum SS SS Teflon818822 SS SS SS Teflon
ConstructionPart # Body Seat Ball Diaphragm818830 SS SS SS Teflon818831 Groundable Acetal SS SS Teflon818833 Polyproylene SS SS Teflon
Infinity 1” Diaphragm PumpPump 818822 (SS)
SpecificationsAir Motor: UnbalancedWetted Pump Material: See ChartDiaphragm Material: TeflonSeat: Stainless SteelBalls (standard): Stainless SteelWeight: Aluminum: 19 lbs. (8.62 kgs)
Stainless Steel: 36 lbs.(16.33 kgs)
Part NumbersAir Motor Repair Kit 862003Diaphragm Repair Kit 862020Ball & Seat Repair Kit
Stainless Steel (Ball/Seat) 862025Teflon (Ball) SS (Seat) 862026
Recommended AccessoriesAir Control 849303Wall Mount 873115Siphon Hose 5” Hose with Stainer
5 Gallon 87450055 Gallon 874501
Infinity 1/2” Diaphragm PumpPump 818830 (SS), #818831 (GNDACT) & #818833 (Polypropylene) 1/2”Diaphragms
SpecificationsAir Motor: UnbalancedWetted Pump Material: See ChartDiaphragm Material: TeflonSeat: 316 Stainless SteelBalls (standard): 316 Stainless SteelWeight: Stainless Steel 14.6 lbs (6.6 kgs)
Groundable Acetal 8.8 lbs (4 kgs)Polypropylene 7.2 lbs. (3.3 kgs)
Part NumbersAir Motor Repair Kit 862004Diaphragm Repair Kit
Stainless Steel 862040Groundable Acetal 862040Polypropylene 862040
Ball & Seat Repair KitStainless Steel (Ball/Seat) 862045Teflon (Ball) SS (Seat) 862046
Recommended AccessoriesAir Control 849303Wall Mount 873116Siphon 5’ Hose with Stainer
5 Gallon 874504
55
Order Toll-Free 800-365-7565Govt. Purchase Cards Accepted
Spray Guns-Accessories
Pumps (cont’)
Infinity Hi-Volume 3:1 Diaphragm PumpPump 818800 - Ratio 3:1
SpecificationsAir Motor: UnbalancedWetted Pump Material: Stainless SteelDiaphragm Material: TeflonSeat: Stainless SteelBalls (standard): Stainless SteelWeight: Stainless Steel 95 lbs. (43 kgs)
Part NumbersAir Motor Repair Kit 862001Diaphragm Repair Kit 862000Ball & Seat Repair Kit
Stainless Steel (Ball/Seat) 862025
Recommended AccessoriesAir Control 849303Wall Mount 873134
Infinity Hi-Volume 1-1/2” Diaphragm PumpPump 818810 - 1 1/2” Diaphragm
SpecificationsWetted Pump Material: Stainless SteelDiaphragm Material: TeflonSeat: Stainless SteelBalls (standard): TeflonWeight Stainless Steel: 84 lbs. (38.1 kgs)Air Motor Repair Kit: 862003
Part NumbersDiaphragm Repair Kit: 862010Ball & Seat Repair Kit
Teflon (Ball) SS (Seat) 862015
Recommended AccessoriesAir Control 849303Wall Mount 873135
Order Toll-Free 800-365-7565Govt. Purchase Cards Accepted56
Spray Guns-Accessories
Pump Packages
ConstructionPart # Wetted Seat Ball Diaphragm818150 SS SS SS Teflon
1” Wall Mount Pump PackagesConstruction
Part # Wetted Seat Ball Diaphragm818121 SS SS SS Teflon818120 Alum SS SS Teflon
ConstructionPart # Wetted Seat Ball Diaphragm818170 SS SS SS Teflon
Bung Mount
Bunk MountPackages include:Air Control,Mounting Plate,Mounting Hardware,and SS Siphon Tubewith strainer andFluid Regulator.
Pail Mount
Pail Mount Packages include:Fluid Regulator and 2 Air Controls.Pump mounted on cover.
1/2” Pail Mount Pump Packages
ConstructionPart # Wetted Seat Ball Diaphragm818160 Grounded SS SS Teflon
Acetal
Wall Mount Bulk Transfer
These bulk transfer/high volumefinishing pumps can efficiently transferfinishing coatings to a day tank. The 3:1can supply large circulating systems.Both pumps are designed to handleheavy abrasive coatings.
818100 3:1 Diaphragm includes:Pump 818800Wall Bracket 873134Air Control 849303
ConstructionPart # Wetted Seat Ball Diaphragm818100 SS SS SS Teflon
818110 1-1/2” Pump includes:Pump 818810Wall Bracket 873135Air Control 849303
ConstructionPart # Wetted Seat Ball Diaphragm818110 SS SS SS Teflon
Infinity DiaphragmWall Mount Finishing
1/2” Bung Mount Pump PackagesWe offer 1/2” and 1’ wall mountpackages.All Packages include:Wall Mount Bracket, Fluid Regulator,2 Air Controls, and Pneumatic Shut Off
1/2” Wall Mount Pump Packages
57
Order Toll-Free 800-365-7565Govt. Purchase Cards Accepted
Spray Guns-Accessories
Pump Packages (cont’)
Infinity “N” Series
Infinity “N” Series pumps are low cost, stainless steelpumps for light industrial air assist and airlessapplications.
Air Assist and AirlessPart Numbers
Cart Mount Pkg. 81218028:1 Ratio with .38 GPM @ 60 cycles
Wall Mount Pkg. 81219028:1 Ratio with .38 GPM @ 60 cycles
Wall Mount Bracket 873116Air Controls 849303
Accessories not includedSiphon Hose - 5 foot hose with strainer
5 gallon 874504
812190Package Includes• Pump• Wall Mount Bracket• Pneumatic Shut Off Valve
812180Package Includes• Pump• Cart• Pneumatic Shut Off Valve
Order Toll-Free 800-365-7565Govt. Purchase Cards Accepted58
Spray Guns-Accessories
Pump Packages (cont’)Gemini 1/2” Diaphragm Pump Packages
Gemini Pump Packages 1/2”, Low Pulse - 100 PSI
Package Bare Pump Wetted Ratio & GPM@ Mounting Air � Suction Hose Agitator Prime Pulse/ FluidNumber Number Parts Size 60 CPM Regltrs w/Bung Adapt. Valve� Filter� Reg.�
818160 818831 acetal, Teflon 1:1, 1/2 NPT 1.2 pail 2 pail 0 0 0 1
818171� 818834 SS, Teflon 1:1, 1/2 NPT 1.2 55 bung 1 NR� 0 0 0 1
818200 818831 acetal, Teflon 1:1, 1/2 NPT 1.2 pail 2 pail 0 1 1 0
818201 818831 acetal, Teflon 1:1, 1/2 NPT 1.2 pail 2 pail 843000 1 1 0
818210 818831 acetal, Teflon 1:1, 1/2 NPT 1.2 wall 2 55 gallon 0 1 1 0
818220 818831 acetal, Teflon 1:1, 1/2 NPT 1.2 55 drum cover 2 55 gallon 843001 1 1 0
818231 818831 acetal, Teflon 1:1, 1/2 NPT 1.2 55 bung 1 NR� 0 0 0 0
818861 818834 SS, Teflon 1:1, 1/2 NPT 1.2 55 bung 0 NR� 0 0 0 1
818871� 818831 acetal, Teflon 1:1, 1/2 NPT 1.2 55 bung 0 NR� 0 0 0 1
MODEL #98-3022SYSTEM COMPONENT LISTItem Part Description Qty. PartNo. No. Sheet1 7000-1204-4 Mach 1 SL Gun 1 2665
2 71-1205 Air Hose Ass’y 1 ---
3 71-3303 Fluid Hose Ass’y 1 ---
4 818160 Gemini Pump Pkg. 1 81816X
General DescriptionThis (5) gallon pail system is complete with Mach 1 SLGun w/94 x 94P set-up, 1:1 Gemini 1/2” diaphragmpump w/air control and 25 ft. fluid and air hoseassemblies
MODEL #98-3023SYSTEM COMPONENT LISTItem Part Description Qty. PartNo. No. Sheet1 6211-2800-7 2001 Gun 1 2316
2 71-1205 Air Hose Ass’y 1 ---
3 71-3303 Fluid Hose Ass’y 1 ---
4 818160 Gemini Pump Pkg 1 81816X
General DescriptionThis (5) gallon pail system is complete with 2001 Gunw/63BSS x 63 PB, 1:1 Gemini 1/2” diaphragm pump w/air control and 25 ft. fluid and air hose assemblies
MODEL #98-3024SYSTEM COMPONENT LISTItem Part Description Qty. PartNo. No. Sheet1 7000-1204-4 Mach 1 SL Gun 1 2665
2 71-1205 Air Hose Ass’y 1 ---
3 71-3303 Fluid Hose Ass’y 1 ---
4 818210 Gemini Pump Pkg 1 81821X
General DescriptionThis 55 gallon, wall mounted system comes completewith Mach 1 SL Gun w/94 x 94P set-up, 1:1 Gemini1/2” Low Pulse diaphragm pump, air control, 25 ft. airand fluid hose and 55 gallon siphon kit.
Gemini 1/2” Low Pulse Spray Outfits
Gemini Pump Packages 1/2”, Max. Flow - 100 PSI
Package Bare Pump Wetted Ratio & GPM@ Mounting Air � Suction Hose Agitator Prime Pulse/ FluidNumber Number Parts Size 60 CPM Regltrs. w/Bung Adapt. Valve Filter Reg.�
818150� 818830 SS, Teflon 1:1, 1/2 NPT 2.4 wall 2 0 0 0 0 1
818170� 818830 SS, Teflon 1:1, 1/2 NPT 2.4 55 bung 1 NR� 0 0 0 1
818230 818836 acetal, Teflon 1:1, 1/2 NPT 2.4 55 bung 1 NR� 0 0 0 0
818860 818830 SS, Teflon 1:1, 1/2 NPT 2.4 55 bung 0 NR� 0 0 0 1
818870� 818836 acetal, Teflon 1:1, 1/2 NPT 2.4 55 bung 0 NR� 0 0 0 1
�Recommended �Not Shown �849303 �873414 �841010 �84-320
59
Order Toll-Free 800-365-7565Govt. Purchase Cards Accepted
Spray Guns-Accessories
Pump Packages (cont’)Raptor Systems (Wall & Cart Mounted)
Air Assisted Airless Outfits - 1800 PSI
Cart Mounted OutfitModel No.98-3072 (UHMWPE)98-3073 (TeflonTM)
Cart-mount outfit is a completefinishing system for mobile flexibility.This outfit includes pump, regulator,cart, gun filter, spray gun with tip andall standard hoses.Shipping weight 35.5 lbs. (16.1 kg.)
Raptor Systems
Wall mounted outfit - with gun and hoses5 gallon (UHMWPE) packings ...... 98-30705 gallon (TeflonTM) packings ........ 98-307155 gallon (UHMW) packings ........ 98-307455 gallon (TeflonTM) packings ...... 98-3075
Cart mounted outfit - with gun and hosesUHMWPE packings ...................... 98-3072TeflonTM packings ........................ 98-3073
Wall mounted package - no gun or hosesUHMWPE packings ....................... 812290TeflonTM packings ......................... 812291
Cart mounted outfit - no gun or hosesUHMWPE packings ....................... 812280TeflonTM packings ......................... 812281
Raptor - Pump onlyUHMWPE packings ....................... 812450TeflonTM packings ......................... 812451Shipping Weight ............... 12.6 lbs (5.7 kg)
Available Accessoires
*Fluid Tip (included in outfits) ...User Selects*3/16 Fluid Hose .............................. 71-4995
1900 PSI (28 bar), 25’, 1/4” NPS•25’ Pneunatic Tubing Assembly ..... 71-4991*Ground Wire Kit ............................... 873067*100 mesh gun filter; ....................... 54-5010Fluid Regulator 300-2000 PSI ............ 84-420
(4.4 - 30 bar)Pump Outlet Fluid Filter .................. 103-1241Air Motor Repair Kit .......................... 861030Lower Pump Repair Kit
UHMWPE ........................................ 861110TeflonTM ......................................................................... 861111
Wet-Sol Plus 1 qt. Packing Lubricant 863009System Assembly Sheet ................. 77-5199Package Part Sheet ........................... 81228XPump Part Sheet ................................ 81245XAir Motor Part Sheet ......................... 842009Fluid Section Part Sheet ..................... 87111X
* Included with outfits
Wall Mounted OutfitModel No.98-3070 (UHMWPE)98-3071 (TeflonTM)
Wall-mount outfit is a completefinishing system for stationaryinstallations. The small profile fitseasily in tight spaces.Shipping weight 21.5 lbs. (9.8 kg.)
Order Toll-Free 800-365-7565Govt. Purchase Cards Accepted60
Spray Guns-Accessories
Pump Packages (cont’)Vecter Spray Finishing Outfit 28:1
Air Assisted Airless Outfits - 2800 PSIInfinity Pump on Cart & Infinity Pump with Wall Bracket
Part Numbers
Infinity Pump on Cart ......................... 812180Infinity Pump wit Wall Bracket .......... 812190Air Motor Repair Kit .......................... 861030Lower Pump Repair Kit ..................... 861040Recommended AccessoriesFluid Regulator 300-2000 PSI ............ 84-420Fluid Regulator 100-900 PSI .............. 84-520Pump Outlet Fluid Filter .................. 103-1241Fluid Tip .009 .................................. 110-0908
(Included in Package) .011 ......... 110-1108.013 ............................................ 110-1308.015 ............................................ 110-1508.018 ............................................ 110-1808
Air Cap ................................................. 93 HA1/8” ErgoFlex Fluid Hose
5000 PSI, 25’, 1/4” N.P.S. ............. 71-68403/16” ErgoFlex Fluid Hose
4000 PSI, 25’, 1/4” N.P.S. ............. 71-6842Double Male Nipple, S.S. ................... 72-7911/8” Pneumatic Tubing Assembly
125 PSI, 25’, 1/4” N.P.T. ............... 71-6860Ground Wire ..................................... 873067
Outfit Features
� 5-year pump warranty on all non-wear parts
� Hydraulically-assisted fluiddelivery combined with HVLP airsupply
� Maximum fluid pressure - 2800PSI
� Pump supplies .38 GPM @ 60CPM to supply tip sizes .009” to.017”
� Drop forged aluminum gun body,stainless steel fluid passages,nozzle and needle
Outfit Benefits
� Stainless steel gun and pump
� Achieves fine finish and highefficiency
� Lightweight and easy to handle;gives operators superior controlwhile fighting fatigue
� Works with lacquers, enamels,stains, sealers, and top coats
� Can spray light to heavyviscosity materials
� Can spray air-assist or airless
� For wood and metal finishing
Part Number 98-3040Cart-mounted outfit (optional hoses shownabove) is a complete finishing package formobile flexibility. This outfit included pump,air controls, cart, gun filter, spray gun withtip and all standard hoses. Shipping weight45 lbs.
Part Number 98-3042Wall-mounted outfit (optional hoses shownabove) is a complete finishing package forstationary applications. The small profile fitseasily in tight spaces.
61
Order Toll-Free 800-365-7565Govt. Purchase Cards Accepted
Spray Guns-Accessories
Pump Packages (cont’)Infinity “Pogo” Pump
Pump #812300 (SS Drum), #812302 (CS Drum)#812304 (SS Stub) - Ratio 2:1 - 200 PSI
Performance
Air Inlet Pressure .... .30-150 PSI (2-10.2 bar)Fluid Pressure Range ...... 60-300 PSI (4-20.4bar)Max. Cycles/Min. ..................................... 120Displacement Per Cycle
7.2 cu. in. ................................. (117.9 cm3)3.9 oz. ......................................... (117.9 ml).03 gal ........................................ (.117 liter)
Cycles per Gallon (Liter) ................... 32 (8.4)Flow @ 120 Cycles/Min. . 4.2 GPM (15.8 lpm)
Materials of Construction812300 and 812304
Noise level @ 60 PSI .................... 77.8 db(A)Lower Pump Material ............. 316 Stnls. SteelPlunger Material ..................... 316 Stnls. SteelCylinder Material .................... Stainless SteelPacking Set ................... UHMW Polyethylene
Max. 120o F Fluid Inlet Temp. (Standard)Max. 180o F Fluid Inlet Temp. (Optional)
Weight Drum ....................... 19 lbs. (8.6 kgs.)Stub .................................... 16 lbs. (7.2 kgs.)
Part Numbers for812300 and 812304 (SS)
Air Motor ........................................... 873008Air Motor Repair Kit .......................... 861034Lower Pump Assembly (812300) .... 873009
SS Stub (812304) ......................... 873200Lower Pump Repair Kit (same) ........ 861089
Materials of Construction812302
Lower Pump Material ................ Carbon SteelPlunger Material .............................................
............... Carbon Steel (Chrome Plated)Cylinder Material ....................... Carbon SteelPacking Set ..................... UHMW Plyethylene
Max 120o F Fluid Inlet Temp.Max 180o F Fluid Inlet Temp. Optional
PackingWeight ................................. 12 lbs. (5.4 kgs.)
Part Number for 812302(Carbon Steel)
Air Motor ........................................... 873008Air Motor Repair Kit .......................... 861034Lower Pump Assembly .................... 873010Lower Pump Repair Kit ..................... 861035Optional Telfon Packing .................... 861036
Available Accessories
Air Control ...................................... 41-15931Muffler .............................................. 873191Wall Mount or Open Drum Mount Bracket
.................................................. 873184
Pogo Spray FinishingOutfit Model #98-3060
General DescriptionExcellent for solvent based adhesivesThis (55) Gallon Bung System is completewith 2001 SS Gun w/66SS x 66SD-3 set up,1:1 ratio supply pump with air control and 25ft. fluid and air hose assemblies
Order Toll-Free 800-365-7565Govt. Purchase Cards Accepted62
Spray Guns-Accessories
Pump Packages (cont’)Infinity Two-Ball Pump Packages
Wall Mount Package Includes
� Pump with UltraCoatTM
� Wall Mount Bracket� Muffler� Air Filter/Regulator� Stainless Steel Material Filter� Manual Fluid Pressure Relief
Valve� Needle Valve
Accessories (Included)
Wall Mount Bracketfor 4-1/4” and 6” motors ............... 873115for 8” motors ................................ 873237
Mufflersfor 4-1/4” and 6” air motors ......... 873158for 8” air motors ........................... 873190
Air Filter/Regulator (2) ...................... 849303SS Fluid Filter w/100 mesh element . 841006
Available Accessories*
Siphon Kits5 gallon ......................................... 87450055 gallon ....................................... 874501
Siphon kits include 5’ hose, SS fittings, tubeand strainer*not included with packages
Model - 4000 PSI1-8, 40:1 Ratio, 3.77 GPM .............. 812265Typical Applications40:1 - used in high-pressure systems withlight, medium or high viscosity coatings.Typically an airless pump, can also supplyair assisted airless. This pump can also beused in multi-gun circulating or a dead endsystem. Bare pump #812415
Model - 4500 PSI1-6, 45:1 Ratio, 1.9 GPM ................ 812155Typical Applications45:1 - used in high-pressure systems withlight, medium or high viscosity coatings.Typically an airless pump, can also supplyair assisted airless. This pump can also beused in a circulating system or a dead endsystem. Bare pump #812355
Model - 1100 PSI1-4, 11:1 Ratio, 3.77 GPM ............... 812115Typical Applications11:1- used in air assist airless and lower-range airless systems with light to mediumviscosity coatings. This pump can be usedas a multi-gun supply pump in a circulating ora dead end system. Bare pump #812315
Model - 2200 PSI1-4, 22:1 Ratio, 1.9 GPM ................ 812125Typical Applications22:1 - used in air assist airless and mid-range airless systems with light to mediumviscosity coatings. This pump can also beused in a circulating system or a dead endsystem. Bare pump #812325
Model - 2300 PSI1-6, 23:1 Ratio, 3.77 GPM .............. 812135Typical Applications23:1 - used in air assist airless and mid-range airless systems with light to mediumviscosity coatings. This pump can be usedas a multi-gun supply pump in a circulating ora dead end system. Bare pump #812335
Model - 3000 PSI1-4, 30:1 Ratio, 1.5 GPM ................ 812145Typical Applications30:1 - used in air assist airless and mid-highrange airless systems with light, medium andhigh viscosity coatings. This pump can alsobe used in a circulating system or a deadend system. Bare pump #812345
63
Order Toll-Free 800-365-7565Govt. Purchase Cards Accepted
Spray Guns-Accessories
Finishing Systems/PackagesHVLP Conversion Outfits
Model 98-1261 - PD Pro FinishOutfit Consists Of . . .94-90 P Mach 1 Gun135-1058 2 h.p. Oiless Air Compressor83Z-220 2.8 Gallon ASME PT Tank71-1203 15’ Air Hose Assembly
(Compressor to Tank)71-1205 25’ Air Hose Assembly
(Tank to Gun)71-3383 25’ Fluid Hose Assembly
(Tank to Gun)
Model 98-1121A one-quart starter outfit withoutcompressor. For touch-ups andsmall to medium jobs by contractors,cabinet makers, and wood finisherswho have existing compressors (1.5H.P. Minimum Req’d)
• 98-1120 Mach 1 Conversion 1Quart HVLP Outfitwith 94 x 90P nozzle
• 71-1205 25’ 5/16” Air Hose Assembly• 73-134 Air Regulator w/Gauge
Model 98-1127Same as 98-1121 except with M1-G Gravity Spray Gun withstand
Model 98-1120Outfit Consists of . . .94-90P Mach 1 Gun80-272 1 Quart Pressure
Assisted Stainless Steel Cup
Model 98-1121Outfit Consists of . . .98-1120 Mach 1 Gun71-1205 25’ Air Hose Assembly
(hose not shown)73-134 Air Regulator with Gauge
Conventional Air Spray Outfits
Model 98-1067Binks Steadi-Grip outfit. External mixnozzles for enamels, primers, polyure-thane. Includes standard 2001 gun with63BSS-63PB, 5 ft. of air and fluid hose,air regulator valve and 80-228 pressurecup. Optional nozzles are available.
HVLP Touch Up Outfits
Vecter Spray Finishing Outfit812180 Infinity Pump on Cart812190 Infinity Pump with Wall Bracket861030 Air Motor Repair Kit861040 Lower Pump Repair Kit10-411 .011 Fluid Tip (included in pkg.)
98-3072 Raptor Spray Finishing SystemWall mounted unit complete with gun andhoses
98-3070 UHMWPE packings98-3071 Teflon packings
Cart mounted unit complete with gun andhoses
98-3072 UHMWPE packings98-3073 Teflon packings
Wall mounted unit - no gun or hoses812290 UHMWPE packings812291 Teflon packings
Cart mounted unit - no gun or hoses812280 UHMWPE packings812281 Teflon packings
Raptor - Pump Only812-450 UHMWPE packings812451 Teflon packings12.6 lbs. Shipping Weight
Order Toll-Free 800-365-7565Govt. Purchase Cards Accepted64
Spray Guns-Accessories
Drum Covers and Agitators
Direct Drive Agitator
Direct Drive Agitator (only) . 41-3304
Direct Drive Agitator
w/Cover .................................. 31-129
Includes: 31-124 Cover & 41-3304
Agitator
Container Size .................... 55 Gallon
Motor Specifications
Air Motor Model .................... Direct
H.P. ....................................... 1/4
CFM ....................................... 4-8
Shaft Specifications
Material ..................... Stainless Steel
Mount ................................. Flange
Diameter in. (mm) ...... 5/8” (190.5 mm)
Max. Speed ....................... 1000 RPM
Propeller Specifications
Number of Propellers ...................... 2
Diameter (in.) ............................ 5 1/8”
Material ..................... Stainless Steel
Cover Material ..............Carbon Steel
Part Sheet Ref. ............................ 1390
Direct Drive Agitator
Direct Drive Agitator (only) . 41-3312
Direct Drive Agitator
w/Cover .................................. 31-133
Includes: 41-3205 Cover & 41-3312
Agitator
Container Size ...................... 5 Gallon
Motor Specifications
Air Motor Model .................... Direct
H.P. ....................................... 1/4
CFM ....................................... 4-8
Shaft Specifications
Material ..................... Stainless Steel
Mount ................................. Flange
Diameter in. (mm) ......3/8” (114.3 mm)
Max. Speed ....................... 1000 RPM
Propeller Specifications
Number of Propellers ...................... 1
Diameter (in.) ................................... 3
Material ..................... Stainless Steel
Cover Material ............. Carbon Steel
Part Sheet Ref. ............................ 1474
Gear Reduced Drive Agitator
Agitator (only) ...................... 41-3311
Agitator w/Cover .................... 31-131
Includes: 31-124 Cover & 41-3311
Agitator
Container Size .................... 55 Gallon
Motor Specifications
Air Motor Model ....................... Gear
Gear Ratio .................. 20:1 Reduction
H.P ....................................... 1/4
CFM ....................................... 4-8
Shaft Specifications
Material ..................... Stainless Steel
Mount ................................. Flange
Diameter in. (mm) ......7/8” (266.7 mm)
Speed Range ................... 15-90 RPM
Propeller Specifications
Number of Propellers ...................... 2
Diameter (in.) .......................... 14 1/2”
Material ..................... Stainless Steel
Cover Material ............. Carbon Steel
Part Sheet Ref. ............................ 1657
ElevatorPart #41-9000
For lifting 55 galloncover-mounted pump units.
Shipping Wt. ..........................68 lbs.
Part Sheet Ref. ..........................1392
Drum Covers
Part No. Container Description Shipping Wt. Lbs.41-2182* 5 Carbon Steel Pail Cover for Comet 3C & 4B 541-2414** 55 Carbon Steel Drum Cover for Comet 3C & 4B, Hi-Vol 2341-3205 5 Carbon Steel Pail Cover for 5 Gal. Agitator
& Siphon Tube Only 631-124 55 Carbon Steel Drum Cover for 55 Gal. Agitator
& Siphon Tube Only 24* with mounting holes for: Pump, Air Control, Agitator and Filter** For use with Hi-Vol. 41-11499 adapter required.
5 Gallon Pail Cover
55 Gallon Drum Cover
Direct Drive Agitatorw/Cover
Part 31-129
Direct Drive Agitatorw/Cover
Part 31-133
Gear Reduced DriveAgitator w/Cover
Part 31-131 41-9000
65
Order Toll-Free 800-365-7565Govt. Purchase Cards Accepted
Spray Guns-Accessories
Fluid Regulators
Downstream Medium FlowBody/ Regulated Working Maximum
Model Ball & Seat Pressure Range Pressure with Gauge Inlet PressureNumber (see code at bottom) PSI (bar) PSI (bar) PSI (bar)
1/4” ports, medium pressure to 1 GPM (3.785 liters)84-420 S/S, T/C 300-2000 3000 300084-520 S/S, T/C 100-900 1000 3500
3/8” ports, medium pressure to 3 GPM (11.4 liters)845010 S/S, T/C 400-1250 (27.2-83) 3000 (204)845011 S/S, T/C 1000-3000 (59-207) 6000 (408)
Downstream High FlowBody/ Regulated Working Maximum
Model Ball & Seat Pressure Range Pressure with Gauge Inlet PressureNumber (see code at bottom) PSI (bar) PSI (bar) PSI (bar)
3/8” ports, high pressure to 6 GPM (22.7 liters)845001 S/S, T/C 100-800 (7-55) 1000 (69) 1250 (85)845013 S/S, T/C 2000-5000 6000
Back Pressure ModelsBase Regulated Working Maximum
Model Housing Seat Pressure Range Pressure with Gauge Inlet PressureNumber (see code at bottom) PSI (bar) PSI (bar) PSI (bar)
1/4” ports, medium pressure regulator84-421 T/C 300-2000 3000 350084-521 T/C 100-900 1000 3500
3/8” ports, high-flow to 6 GPM (22.7 liters)845000 S/S, T/C 0-200 (0-14) 200 (14) 200 (14)845002 S/S, T/C 0-800 (0-14) 800 (55) 800 (55)845012 S/S, T/C 1000-3000 3000
1/2” port, low shear to 1 GPM (3.78 liters)84-601 S/S, S/S 0-200 (0-14) 200(14) 200(14)
3/4” ports, high-flow to 11 GPM (41.6 liters)84-404 S/S, S/S 10-140 150 150
Optional Gauge: 84-246 - 0 - 200 PSI Ga
1 1/4” ports, system-flow** to 18.5 GPM (701 liters)845003 S/S, T/C 0-200 (0-14) 200(14) 200(14)
Material codesT/C Tungsten Carbide S/S Stainless Steel
**Flow rates tested in 55 CPS Material
Low Pressure845001
(with gauge)
High Pressure845010845011
(without gauge)
84-42084-42184-52084-521
Optional Gauges873055
Rear Mount (3000 PSI)101-3069 (3000 PSI)
84-491 (1000 PSI)84-246 (200 PSI)
845000845002
(with Gauge)
84-404(without Gauge)
Order Toll-Free 800-365-7565Govt. Purchase Cards Accepted66
Spray Guns-Accessories
HVLP Conversion AccessoriesHVLP Conversion Outfits (converts from HVLP to conventional airspray to electrostatic . . .
all with simple optional accessories)
Mix or match the following componentsto provide all the equipment contractorsneed. For maximum performance, pleaseconsult your Distributor or BinksFinishing Specialist when replacing ordesigning any HLVP outfit.
Model 135-10582 h.p. compressor
Model 80-2721 quart SS cup assembly
Model 73-134Regulator
Zinc-Coated 2.8 GallonASME PT Tanks
Model 83Z-220Durable, economictanks that can handleup to 80 PSIG. Made ofheavy-gauge steel,coated on the insideand outside with zincplating and chromatedip. Thiokol gaskets.Pressure Tank: Model 83Z-220Agitator Drive: NoneAir Control: Model 83-2417Regulators: Quantity 2Shipping Wt. (lbs): 30Part Sheet: 1458
Pressure Tank LinersSave clean-up time andsolvent costs withthese disposablepolyethylene liners.Use liners with allsystems.Carton of 80 Liners for 2.8 GallonsASME PT Tanks
Model 80-350Ideal for small batchproduction spraying(2 qt. capacity)
Model 80-356SG2 Cup LinersIncludes 12plastic liners foreasy clean-up.
Air Nozzle Test Gauge
Part Number Description54-3622 92HA & 93HA Nozzle
(Mach 3SL)54-3908 900 Series54-3935 95 & 97 Series54-4066 80 Liners54-4078 95AS & 97AS Nozzles
(Siphon)54-4150 2S, 2P Cub Gun54-4356 93P Nozzle
Five Easy Ways to Order from Fluid-Air Products Inc.
CALLToll-Free
800-365-7565to order
MAILyour order
12834 Gravois Rd.St. Louis, MO 63127
FAXyour order
314-729-7099
E-MAILyour order
WEBSITEVisit our site
www.fluidair.comand link to
www.gsa.govfor on-line ordering
67
Order Toll-Free 800-365-7565Govt. Purchase Cards Accepted
Spray Guns-Accessories
Spray Gun Accessories
Air Controller Fluid Circulating Connections
Part Number: 72-1823(stainless)Use for Spray Gun Models95 and 2001 in circulatingand heated fluid systems.3/8”NPS (m) connection.Shipping weight 14 oz.
Spray Gun Extensions
For hard to reach location. Attach toSpray Gun Models 95 and 2001. Forconventional coatings.Air inlet 1/4” NPS (m)Fluid inlet 3/8” NPS (m)
Length Part Shipping Actin Feet No. Wt. Wt.
(lbs.) (lbs.)4 54-296 4 36 54-297 5 1/4 4
Gunner’s Mate(spray gun lubricant)
Part Number: 6-429One case of (20) two-ounce Gunner’sMate bottles.Part Number: 6-428Two ounce bottle of Gunner’s Mate.
Fluid Strainer Assemblies
In-line cartridge filter.Part Number 54-988 (100 mesh)Part Number 54-982 (150 mesh)Shipping Weight 1 lb.
In-Line Cartridge Filter
In-line Cartridge Filter*
Cartridge Replacement MeshFilter ScreenAssembly54-990 54-987 10054-981 54-980 150
Shipping Weight14 oz. 4 oz.
* Also adaptable to fluid lines fromspray guns
Fluid Inlet Tube Extension(less fluid stainer)
Part Number: 54-957Brings air and fluid hoses together atthe base of the spray gun. Use forSpray Gun Models 95, 95SL and 2001.3/8” NPS (m) connection.Shipping weight 8 oz.
Part Number 73-125
For air inlet at-the-gun mounting to giveconvenient, immediate pressure readingand correction. Anodized aluminumbody is fitted with:• 1/4” NPS (f) swivel connection for
360o variable position• 1/4” NPS (m) thread• Pressure adjusting knob and pressure
gauge.Part Sheet: 2142
Air MeteringValve Assemblies
Part Number: 73-159Type: 90o
Thread: 1/4” NPS (f)1/4” NPS (m)
For Mach 1 and Mach 1A spray gunsonly.Part Number 54-4090-90o angle head,Part Sheet 2635Part Number 54-4091 45o angle head,Part Sheet 2635
Order Toll-Free 800-365-7565Govt. Purchase Cards Accepted68
Spray Guns-Accessories
Spray Gun Accessories
For MACH 1 and MACH 1A spray guns only.Part Number 54-4090-90 degree angle headPart Sheet: 2635Part Number 54-4091 - 45 degree angle headPart Sheet: 2635
45 & 90 Deg.Angle Heads
Extensions
52-3706 6” 52-3718 18”52-3712 12” 52-3724 24”Note: Extensions may be joined together for added length.Specify new needle length. Extensions are sold less air capand fluid nozzles. Specify spray gun model that will be usedwith the extension.
Five Easy Ways to Order from Fluid-Air Products Inc.
CALLToll-Free
800-365-7565to order
MAILyour order
12834 Gravois Rd.St. Louis, MO 63127
FAXyour order
314-729-7099
E-MAILyour order
WEBSITEVisit our site
www.fluidair.comand link to
www.gsa.govfor on-line ordering
ConstructionPart Number Description Tube Fittings W/PSI 5 Gallon 55 Gallon
Siphon874500 1” siphon hose w/16” wand (3/4) Nylon SS X874501 1” siphon hose w/36” wand (3/4) Nylon SS X874504 1/2” siphon hose w/16” wand Nylon SS X
Siphon Hoses and Ball Valves
69
Order Toll-Free 800-365-7565Govt. Purchase Cards Accepted
Spray Guns-Accessories
Accessories for Air Control Equipment
Model 85-200Capacity: 40 CFM,0-150 PSIG1.13 M3/Min, 0-10.34 BARInlet: 3/8” NPT (f)Three regulated outlets:
1/4” NPT (f)Part Sheet 1787Weight: 2-1/2 lbs., 1.13 kg.
Model 85-201Capacity: 40 CFM,0-150 PSIG1.13 M3/Min, 0-10.34 BARInlet: 3/8” NPT (f)Two main line pressure outlets:1/4” NPT (f)Two regulated outlets:
1/4” NPT (f) & 3/8” NPT (f)Part Sheet 1787Weight: 2-1/2 lbs., 1.13 kg.
Model 85-225Capacity: 100 CFM,0-150 PSIG2.83 M3/Min, 0-10.34 BARInlet: 1/2” NPT (f)Three regulated outlets:
one 1/2” NPT (f)two 1/4” NPT (f)
Part Sheet 1787Weight: 3-1/2 lbs., 1.59 kg.
Binks Pressure Gauges
Easy to read dials forpositive, accurate andcontinuous measure ofair pressure. Quick,simple installation. Airmodels have fit 1/4”NPT (m) inlet connec-
tion. Nine models are available (twowith back inlets). Shipping weight 1 lb.each.
Model Range RangeNumber (PSI) (BAR)83-1636 0-15 1-1.0383-1414 0-30 0-2.0783-386 0-60 0-4.1483-1355 0-100 0-6.8983-2727 0-100 0-6.8983-1290 0-150 0-10.3483-2218** 0-160 0-11.0383-387 0-200 0-13.79** With Back Inlet
Binks Automatic Drains
Fits all Binks oil andwater extractors,coalescers, and dryers.Merely remove thedrain screw and replaceit with the Binksautomatic drain andfurnished nipple. Oil,water, sludge and othercontaminants drainingfrom the compressedair line will be trapped
in the bowl. The accumulation of liquidin the bowl causes the drain float torise. This action admits bowl airpressure into a piston chamber which,in turn, opens a bleed valve and allowsthe liquid in the bowl to be expelledunder pressure. When the liquid leveldrops sufficiently, the float closes anddraining stops. The adaptive nipplewith fit 1/8” NPT pipe or 3/8” - 27machine threads. This makes fieldconversions simple.
Part Sheet 2453For Repair Kit, order Part No. 37-1552For 3’ Drain Hose, order Part No. 72-692DM Nipple and 71-7306 Drain Hose
Part No. Size Pressure (PSI) Thread72-81611 3/8” 250 1/4” NPS (m) 1/4” NPT (m)72-81712 3/8” 250 3/8” NPS (m) 3/8” NPT (m)72-21611 3/8” 500 1/4” NPS (m) 1/4” NPT (m)72-21712 3/8” 500 3/8” NPS (m) 3/8” NPT (m)72-11611 3/8” 4000 1/4” NPS (m) 1/4” NPT (m)72-11712 3/8” 4000 3/8” NPS (m) 3/8” NPT (m)172-31611* 3/8” 4000 1/4” NPS (m) 1/4” NPT (m)172-31712* 3/8” 4000 3/8” NPS (m) 3/8” NPT (m)72-50202 3/4” 1000 3/4” NPT (f) 3/4” NPT (f)
*Stainless Steel Ball Valve Replacement seal 83-2600-5 (pack of 5)
Model 72-81611 Model 72-21712 Model 172-31611
Low Medium &High
Medium &High
Model 83-1290
Model 37-1553
Order Toll-Free 800-365-7565Govt. Purchase Cards Accepted70
Spray Guns-Accessories
Cartridge RespiratorsSuperior Protection against Organic Vapors, Fumes, Dusts and Mists
Millennium 3000 - Premium Paint Spray Respirator
Breathe easier with the Binks Millennium 3000 - a premium charcoal filter respirator.Ready-to-use right out of the box, the Millennium 3000 combines superior comfortwith the fit, durability and protection of a conventional half-mask respirator. De-signed with finishing professionals in mind, the Millennium 3000 features:
• Heavy duty silicone and metal face-piece for increased durability and comfort• Adjustable, heavy duty straps and head band• Maximum serviceability - fully serviceable with a Binks Tune-Up Kit• Extended life - withstands repeated cleanings and exposure to paints and solvents
without deterioration.
Millennium 2000 - Classic Paint Spray Respirator
For economical protection against organic vapors, fumes, dusts, and mists, try theBinks Millennium 2000 - a value-priced charcoal respirator. Ready-to-use right out ofthe box, the Millennium 2000 provides the fit and comfort of a traditional respiratorand protection from paints and solvents. An oil-resistant pre-filter (Part #40-1935) isalso available. The value-priced Millennium 2000 is a good choice when convenienceand value are important considerations.
Both the Binks Millennium 3000 and Millennium 2000 Respirators meet 42 CFR Part 84Standards.
Binks Tech Tip . . . When should cartridges and filters be replaced?
The service life of cartridges and filter depends on several factors including breathingrate/volume, concentration of contaminants, temperature and humidity.
• Replace chemical cartridges when you detect odor or taste of vapors, or when youexperience eye, nose or throat irritation.
• Replace pre-filters or filters when you experience increased resistance to breathing.
WARNING!Binks Millennium paint spray respirators are not to be used with urethane paints orother paints containing di-isocyanates. Di-isocyanates have a low odor threshold andare not easily detectable by smell. A dangerous level of di-isocyanates can breakthrough a charcoal filter cartridge before the user is able to smell it. Painters usingsuch paints must use an air-supplied respirator.
71
Order Toll-Free 800-365-7565Govt. Purchase Cards Accepted
Spray Guns-Accessories
Understanding Pressure Drop
Pressure Drop BasicsUnderstanding pressure drop requires abasic knowledge of CFM (cubic feet perminute) and psi (pounds per squareinch). CFM refers to the given volumeof air that flows past a given point inone minute. PSI is the amount of forcepushing the cubic foot of air throughthe hose or tool.
The amount of air that a toll consumesall remain constant for a given set ofconditions. Pressure will always dropwhen the tool is turned on and when theair begins to flow through the hose. Inaddition, pressure drop will vary inrelation to any adjustment made on thetool.
The same pressure loss principles applywhen moving fluid through a hose. Besure to consider pressure loss whenchoosing fluid hose and fittings.
Pressure Drop Points
Losses in pressure (psi) are dependenton the variables of hose length, hosediameter, volume (cfm), and the numberand design of quick disconnects. Tominimize the effects of pressure dropand the resulting lack of volume,consider the following.
• Frictional resistance between the fluidand the walls of the hose.
• Internal resistance (shear) - fluidmoves faster through the center of thehose and slower against the walls.
• Change in direction of air or fluidthrough the system.
• Volume at any given time as deter-mined by back pressure.
• The number of system connection,adapters, nipples, valves, filters andair and fluid controls.
• Hose I.D. - use the minimum I.D.necessary for each application
• Hose length - pressure drop isproportional to hose length
• Surface of the hose’s inner tube - arough surface can increase pressuredrop up to 50%.
Technical Data
This chart is for approximating andshould only serve as a guide in sizing airhose. Pressure drops are directlyproportional to hose lenghts. Thatmeans that if hose length doubles, forexample, pressure drop doubles.
Example:• 100’ x 1/2” I.D. hose at 40 cfm has a
pressure loss of 17 1/2 psi.• 200’ x 1/2” I.D. will lose 35 psi• 50’ x 1/2” I.D. will lose between 8 to 9
psi.
Pressure drop in ounds per sq. in., per 100 ft. of hose
To determine pressure drops fo hose lengths other than 100’
(Pressure Dropper Chart Figure) x (Ft. of Hose) = Pressure drop for hose used
100
Flow
of f
ree
air i
n cu
bic
feet
per
min
ute
Pressure Drop Chart
Order Toll-Free 800-365-7565Govt. Purchase Cards Accepted72
Spray Guns-Accessories
Premium Spray Finishing Air HoseSmooth Cover
Recommended UsePremium spray finishing air hose.Highest oil resistance rating --Class A. Designed for all finishingoperations as well as ruggedindustrial applications, especiallyapplications requiring lubricants inthe airline supply or where oil andgrease are present in the environ-ment. Excellent for use with waterand water-based materials.Temperature range from -20oF to+200oF(max).
TubeNitrile Rubber (Buna-N) Class Aoil resistance
ReinforcementHigh tensile strength rayon braidand spiral reinforcement. Speciallydesigned for maximum flexibility(under pressure) and maximumcoupling retention.
CoverNeoprene, red, smooth. Abrasionresistant. Class A oil resistance
ConnectionsThree-piece, plated brass, reus-able.
I.D. Sizes1/4”, 5/16”, 3/8”, 1/2” and 3/4”Smooth Cover.
Bulk Hose Chart - Smooth Cover
STD. REELMAXIMUM LENGTH IN FT. SHIPPING WGT.
SIZES AVAILABLE BULK HOSE WORKING BEND PLUS OR MINUS BASED ON AVG. HOSE WEIGHTI.D. O.D NUMBER PRESSURE (PSI) RADIUS 50 FT. FEET PER REEL PER 100 FEET
1/4” 1/2” 71-10000 250 2 3/4” 500 50 lbs 10 lbs.5/16” 5/8” 71-11000 250 3” 500 87 lbs. 16.2 lbs.3/8” 11/16” 71-12000 250 3 1/2” 500 96 lbs. 18 lbs.1/2” 7/8” 71-13000 250 4” 300 86 lbs. 26.8 lbs.3/4” 1 1/8” 71-14000 250 6” 300 112 lbs. 35 lbs.
Hose Assemblies and Connections
HOSESIZES AVAILALBE LENGTH OF ASSEMBLY BULK HOSE CONNECTION TYPE OF CONNECTIONI.D. HOSE PART NO. NUMBER THREAD SIZE CONNECTION PART NUMBER
1/4” 5 ft. 71-1101 71-10000 1/4” NPS (f) three piece reusable 72-13031/4” 25 ft. 71-1105 71-10000 1/4” NPS (f) three piece reusable 72-13031/4” 50 ft. 71-1106 71-10000 1/4” NPS (f) three piece reusable 72-13035/16” 5 ft. 71-1201 71-11000 1/4” NPS (f) three piece reusable 72-13175/16” 25 ft. 71-1205 71-11000 1/4” NPS (f) three piece reusable 72-13175/16” 50 ft. 71-1206 71-11000 1/4” NPS (f) three piece reusable 72-13173/8” 25 ft. 71-1355 71-12000 1/4” NPS (f) three piece reusable 72-13253/8” 50 ft. 71-1356 71-12000 1/4” NPS (f) three piece reusable 72-1325
Reusable Connections
73
Order Toll-Free 800-365-7565Govt. Purchase Cards Accepted
Spray Guns-Accessories
Recommended UsePremium, versatile fluid hose, forfinishing operations plus a wide rangeof fluid applications. FluidallTM is idealfor resins and solvents contained inlatices, spoxies, urethanes, alkyds,primers, acrylics, polyesters, silicones,bitumastic coatings, oil and water basedpaints, lacquers, alcohol and latexcoatings. Temperature range from -30oFto +160oF (max).
TubeNylon.
ReinforcementHigh tensile rayon braid. Speciallydesigned for maximum flexibility (underpressure) and maximum couplingretention.
CoverNeoprene, black, smooth. Abrasionresistance. Class A - Oil Resistance.
ConnectionsThree-piece, plated brass, reusable.
I.D. Sizes1/4”, 3/8”, 1/2”, 3/4” and 1”
FluidallTM Fluid HoseNylon Lined, Maximum Versatility
Bulk Hose Chart - Smooth Cover
STD. REELMAXIMUM LENGTH IN FT. SHIPPING WGT.
SIZES AVAILABLE BULK HOSE WORKING BEND PLUS OR MINUS BASED ON AVG. HOSE WEIGHTI.D. O.D NUMBER PRESSURE (PSI) RADIUS 50 FT. FEET PER REEL PER 100 FEET
1/4” 1/2” 71-280 500 3” 500 43 lbs 8 lbs.3/8” 11/16” 71-282 500 3 1/2” 500 83 lbs. 15 lbs.1/2” 7/8” 71-283 750 5” 300 74 lbs. 22 lbs.3/4” 1 3/16” 71-284 750 8” 300 118 lbs. 36 lbs.1” 11/2” 71-285 750 12” 300 168 lbs. 53 lbs.
Hose Assemblies and Connections
HOSESIZES AVAILALBELENGTH OF ASSEMBLY BULK HOSE C O N N E C T I O N TYPE OF C O N N E C T I O NI . D . HOSE PART NO. N U M B E R THREAD SIZE C O N N E C T I O N PART NUMBER
1/4” 5 ft. 71-3380 71-280 3/8” NPS (f) three piece reusable 72-13061/4” 25 ft. 71-3383 71-280 3/8” NPS (f) three piece reusable 72-13061/4” 50 ft. 71-3384 71-280 3/8” NPS (f) three piece reusable 72-13063/8” 5 ft. 71-3300 71-282 3/8” NPS (f) three piece reusable 72-13283/8” 25 ft. 71-3303 71-282 3/8” NPS (f) three piece reusable 72-13283/8” 50 ft. 71-3304 71-282 3/8” NPS (f) three piece reusable 72-13281/2” 25 ft. 71-3403 71-283 1/2” NPS (f) three piece reusable 72-13341/2” 50 ft. 71-3404 71-283 1/2” NPS (f) three piece reusable 72-1334
Reusable Connections
Order Toll-Free 800-365-7565Govt. Purchase Cards Accepted74
Spray Guns-Accessories
Specialized Hose AssembliesPremium Airless Paint Spray Hose Conductive -- No Wire
Hose Assemblies and Connections
JACKET SIZES LENGTH ASSEMBLY CONNECTION TYPE OFCOLOR I.D. OF HOSE PART NO. THREAD SIZE CONNECTION
� 3/16” 30” whip end 71-8360* 1/4” NPS (f) permanent� 3/16” 5 ft. 71-8085 1/4” NPS (f) permanent� 3/16” 25 ft. 71-8088 1/4” NPS (f) permanent� 1/4” 15 ft. 71-7703 1/4” NPS (f) permanent� 1/4” 25 ft. 71-7704 1/4” NPS (f) permanent� 1/4” 50 ft. 71-7705 1/4” NPS (f) permanent� 5/16” 25 ft. 71-7504 1/4” NPS (f) permanent� 5/16” 50 ft. 71-7505 1/4” NPS (f) permanent� 3/8” 5 ft. 71-8421 3/8” NPS (f) permanent� 3/8” 10 ft. 71-8422 3/8” NPS (f) permanent� 3/8” 50 ft. 71-8425 3/8” NPS (f) permanent� 3/8” 100 ft. 71-8427 3/8” NPS (f) permanent
Recommended UseHigh pressure paint spray applications,including electrical airless. Compatiblewith a wide range of materials, solventsand water based coatings. Designed forthe most durable and extended service.Temperature range -40oF to +180oF.
TubeNylon - this no-wire hose incorporates anylon core tube with a conductivepolymer surrounding it. Electricalconductivity will remain throughout thehose life.
ReinforcementHigh tensile nylon braid reinforcement.
CoverPolyurethane, white or yellow depdningon hose I.D.
ConnectionsPermanently attached, plated steel withspring guards.
I.D. Sizes3/16”, 1/4”, 5/16”, and 3/8”.
RATED BEND LBS./I.D. O.D. W.P. RADIUS 100 FT.
�3/16” .425” 3000 PSI 1 1/2” 4.7�1/4” .520” 3000 PSI 1 1/2” 7.9�5/16” .520” 3000 PSI 1 1/2” 8.2�3/8” .730” 3000 PSI 2 1/2” 13.3
Specifications� Yellow Jacket color; � White Jacket color* Connection Thread = 1/4” NPS (f) x 1/4” NPT (m) w/30 deg. seat. Hose connector 72-691, 1/4” NPS(m) x 1/4” NPS(m) for connecting hose assemblies together. Bulk hose notavailable - assemblies only.
� Yellow Jacket color� White Jacket color
75
Order Toll-Free 800-365-7565Govt. Purchase Cards Accepted
Spray Guns-Accessories
Specialized Hose AssembliesContractor Quality Airless Paint Spray Hose Conductive -- No Wire
Recommended UseDesigned specifically for commercialand industrial painting contractors andheavy work load applications. Excellentflexibility and durability. For use withboth solvent and water-based coatings.
TubeNylon.
Reinforcement and CoverConsists of a seamless extrudedsynthetic braid reinforcement ad a pin-pricked polyurethane cover. Theinnermost braid layer is chemicallybonded to the innertube and the outerlayer is chemically bonded to the cover.A static drain element consisting offlexible electrically conductive plastictape is located between the braid layers.Cover-black. Operating temperaturefrom 0oF to +200oF.
ConnectionsPermanently attached, plated steel withspring guards.
I.D. Sizes1/4”.
SIZES LENGTH ASSEMBLY C O N N E C T I O N TYPE OFI . D . OF HOSE PART NO. THREAD SIZE C O N N E C T I O N
1/4” 25 ft. 71-3530 1/4” NPS (f) permanent1/4” 50 ft. 71-3531 1/4” NPS (f) permanent
Working pressure 3,300 PSI.Burst pressure 13, 200 PSIHose connector 72-691, 1/4” NPS(m) x 1/4” NPS(m) for connecting hose assemblies together.
Order Toll-Free 800-365-7565Govt. Purchase Cards Accepted76
Spray Guns-Accessories
TubingNylon, Polyethylene, Teflon and Reusable Connections
NylonRecommended ServiceModerate pressure service for conveying enamels, lacquers, and other finishes. (Solvent-resistant nylon tubing.)Also suitable for amine catalysts in foam coating applications. May be used as an air hose (low pressure) in larger sizes shown.
CONNECTIONSRATED WORKING LBS.
BULK SOLID SOLID SWIVEL SWIVEL SWIVEL SWIVEL SWIVEL SWIVEL HOSE SIZE PRESSURE (PSI) 100SIZE TUBING NO. THREAD PART NO. THREAD PART NO. THREAD PART NO. THREAD PART NO. I.D. O.D. 70OF 150OF FEET
1/8” 71-226 1/8” NPT(m) 72-1676 1/4” NPS(f) 72-1677 3/8”NPS(f) 72-1805* 9/16-20(f) 1/8” .225” 475 190 1.25
3/16” 71-230 1/4”NPS(f) 72-1679 3/8”NPS(f) 72-1729 3/16”.264” 225 190 1.28
1/4”NPS(f) 72-1747• 3/8”NPS(f) 72-1790*
1/4”NPS(f) 72-1792-
1/4” 71-227 1/8”NPT(m) 72-1680 1/4”NPS(f) 72-1681 3/8”NPS(f) 72-1683 9/16-20(f) 72-1682 1/7 .350 225 190 2.18
1/4”NPS(f) 72-1687• 3/8”NPS(f) 72-1689•
1/4”NPS(f) 72-1799* 3/8”NPS(f) 72-1801*
1/4”NPS(f) 72-1800- 3/8”NPS(f) 72-1802-
3/8” 71-229 1/4”NPS(f) 72-1811* 3/8”NPS(f) 72-1685 9/16-20(f) 72-1684 3/8” .500” 200 140 3.90
3/8”NPS(f) 72-1812*
Connections: •Reusable, plated brass, with spring guard All nylon tubing sold in bulk only - 500 ft.-Reusable, stainless, with spring guard Flexible nylon tubing, translucent, no reinforcement*Reusable, stainless swivel nut and tailpiece
PolyethyleneRecommended ServiceLow pressure air and fluid service. Suitable for conveying water-based paints and catalyst, and for polyester, lacquer and finefinishes
CONNECTIONSBULK SWIVEL SWIVEL SWIVEL SWIVEL SWIVEL HOSE SIZE RATED LBS./100
SIZE TUBING NO. THREAD PART NO. THREAD PART NO. THREAD I.D. WALL W.P. ,PSI FEET
1/4” 71-223 1/4”NPS(f) 72-1579 3/8”NPS(f) 72-1581 9/16-20(f)
1/4”NPS(f) 72-1583* 3/8”NPS(f) 72-1585* 9/16-20(f) 1/4” 1/16” 100 2.5
3/8”NPS(f) 72-1839•
Connections: *Reusable, plated brass, with spring guard Polyethylene tubing sold per foot - no specific box size•Stainless steel swivel nut and tailpiece Flexible polyethylene tubing, translucent, no reinforcement
Teflon, Fluid TubingCONNECTIONS
BULK SWIVEL SWIVEL SWIVEL SWIVEL SWIVELSIZE TUBING NO. THREAD PART NO. THREAD PART NO. THREAD
1/8” 71-248 1/4”NPS(f) 72-1944 3/8”NPS(f) 72-1945•
3/16” 71-209 1/4”NPS(f) 72-1577 3/8”NPS(f) 72-1730
1/4” 71-204 1/4”NPS(f) 72-1579 3/8”NPS(f) 72-1581 9/16-20(f)
1/4”NPS(f) 72-1583* 3/8”NPS(f) 72-1585* 9/16-20(f)
3/8” 71-207 3/8”NPS(f) 72-1685
1/4”NPS(f) 72-1811• 3/8”NPS(f) 72-1812• 9/16-20(f)
*Furnished with spring guard.•Stainless steel swivel nut and tailpiece. Teflon tubing sold per foot - no specific box size
SPECIFICATIONS
BULK HOSE HOSE SIZE RATED W.P. LBS./100TUBING NO. I.D O.D PSI FEET
71-204 1/4” 3/8” 140 5
71-209 3/16” 5/16” 140 4.5
71-207 3/8” 1/2” 140 6.5
71-248 1/8” 1/4” 140 5
77
Order Toll-Free 800-365-7565Govt. Purchase Cards Accepted
Spray Guns-Accessories
PART NO.PLATED STAINLESSBRASS STEEL THREADS SWIVEL NUT
72-1823 (2) 3/8”NPS(m) 3/8”NPS(f)
72-1927* - (2) 1/4”NPS(m) 1/4”NPS(f)
72-1869 (2) 1/4”NPS(m) 3/8”NPS
*Plated brass threads, plated steel body and swivel nut
Hose/Tube Accessories
PART NO. SIZE PRESSURE (PSI) THREAD
72-81611 3/8” 250 1/4”NPS(m) 1/4”NPT(m)
72-81216 3/8” 250 3/8”NPT(m) 1/4”NPS(m)
72-81712 3/8” 250 3/8”NPS(m) 3/8”NPT(m)
72-21611 3/8” 500 1/4”NPS(m) 1/4”NPT(m)
72-21712 3/8” 500 3/8”NPS(m) 3/8”NPT(m)
72-11611 3/8” 4000 1/4”NPS(m) 1/4”NPT(m)
72-11712 3/8” 4000 3/8”NPS(m) 3/8”NPT(m)
172-31611* 3/8” 4000 1/4”NPS(m) 1/4”NPT(m)
172-31712* 3/8” 4000 3/8”NPS(m) 3/8”NPT(m)
72-50202 3/4” 1000 3/4”NPT(f) 3/4”NPT(f)
72-60202* 3/4” 3000 3/4”NPT(f) 3/4”NPT(f)
*Stainless Steel Ball Valve replacement seal 83-2600-5 (pack of 5)
Low & High Pressure Ball Valves
Low Pressure Manifolds
PART NO. INLET OUTLET
72-1070 1/4”NPS(f) (2) 1/4”NPS(m)
72-1071 1/4”NPS(f) (3) 1/4”NPS(m)
Note: Outlets include H.P. Ball Valves withconnection thread as indicated.
High Pressure Manifolds
PART NO. DESCRIPTION THREAD
72-887 Stem Assembly Only 3/8”NPS(f)
72-885 Body Assembly Only 3/8”NPS(m)
72-888 Body & Stem Assembly 3/8”NPS(m)
X 3/8”NPS(f)
High Pressure Manifolds
PART NO. DESCRIPTIONS THREAD
72-445 Stem Assembly Only 1/4”NPS(f)
72-467 1/4”NPT(m)
72-2063 Body Assembly Only 1/4”NPS(m)
72-2066 5/16”ID Hose
72-2073 1/4” NPT(f)
72-470 Body & Stem Assembly 1/4”NPS(m)
X 1/4”NPT(m)
72-476 1/4”NPT(f)
X 1/4” NPT(m)
72-2076 1/4”NPS(m)
X 1/4” NPS (f)
Low Pressure Air QuickDisconnects
Med
ium
& H
igh
Med
ium
& H
igh
Low
Stainless Steel
Model 172-31611 Model 72-81611Model 72-21712
Steel or Brass,Body (platedPlated BrassThreads
Plated Steel
72 Series Quick Disconnect(Body and Stem Assembly)
Part No. 72-445(Stem Only)
Part No. 72-2063(Body Only)
Order Toll-Free 800-365-7565Govt. Purchase Cards Accepted78
Spray Guns-Accessories
Adapters, Nipples & Swivels
Adapters
PART NO. MALE THREAD FEMALE THREAD
73-131 1/4”NPS 1/4”NPS
72-55 1/4”NPS 3/8”NPS
72-54 3/8”NPS 1/4”NPS
73-130 3/8”NPS 3/8”NPS
Plated Brass
PART NO. FEMALE MALE
PLATED STEEL STAINLESS THREAD THREAD
102-2122 1/4”NPS 3/8”NPS
102-2193 3/8”NPS 1/4”NPS
72-731 3/8”NPT 1/4”NPS
Adapters
PART NO.PLATEDSTEEL STAINLESS THREAD
72-918* 1/4”NPT(f) 1/4”NPS(f)
73-24*3/8”NPS(m) 3/8”NPS(f)
90o Connections
PART NO. MALE THREAD
71-28* 1/8”NPT 1/4”NPS
57-126 1/8”NPS 1/4”NPS
83-576 1/4”NPT 1/4”NPS
57-13* 1/4”NPT 1/4”NPS
83-1050 1/4”NPS 1/4”NPS
83-1185* 3/8”NPT 3/8”NPT
83-1823 1/2”NPS 1/2”NPT
83-1822* 3/4”NPS 3/4”NPT
72-423 1” NPT 1”NPS
Brass, *Plated Brass or Electroless
Nickel-Plated
Double Male NipplesNIPPLE NUT• THREAD
72-502* 70-868 3/8”NPS X 3/8”NPSBrass, *Plated Brass
•Nut not furnished. Order separately.
Bulk Head Nipples
PART NO. THREAD SWIVEL NUT
73-12* 1/4”NPS(m) 1/4”NPS
73-18 1/4”NPS(m) 3/8”NPS
Plated Brass, *Zinc body, brass swivel nut.
90o Connections
PART NO. SWIVELPLATED STEEL STAINLESS THREAD NUT
41-1412 1/4”NPT(m) 1/4”NPS
102-2127 1/4”NPT(f) 3/8”NPS
83-1697 3/8”NPT(f) 3/8”NPS
Swivel Unions andSwivel Adapters
PART NO. TYPE THREAD
72-780 Straight 1/4” NPS(m) 1/4”NPS(f)
Plated Steel
Hose or Gun Swivel
High Pressure
PART NO. MALEPLATED STEEL STAINLESS THREAD
72-792 1/8”NPT 1/4”NPS
72-969 1/8”NPT 3/8”NPS
72-690 72-790 1/4”NPS 1/4”NPT
72-691 72-791 1/4” NPS 1/4”NPS
83-2484 1/4”NPT 3/8”NPS
83-2055 3/8”NPS 3/8”NPT
72-1888 3/8”NPS 1/4”NPS
72-798 3/8”NPS 3/8”NPS
72-1933 3/8”NPT 1/2”NPS
41-1235 1/2”NPS 1/2”NPT
72-1770 3/4”NPS 3/4”NPT
Double Male Nipples
Low Pressure