200-HWI

ITEM NO. _______________________

W164 n9221 Water street • p.O. Box 450 • Menomonee Falls, Wisconsin 53052-0450 • U.s.a. PHONE: 262.251.3800 800.558.8744 U.S.A./CANADA FAX: 262.251.7067 800.329.8744 U.S.A. ONLY

www.alto-shaam.comD U E T O O N G O I N G P R O D U C T I M P R O V E M E N T , S P E C I F I C A T I O N S A R E S U B J E C T T O C H A N G E W I T H O U T N O T I C E .P R I N T E D I N U . S . A .

200-HW series HOT FOOD HOLDiNG DrOP-iN WeLL

#08B - 06/16

Short Form Spec

The Alto-Shaam 200-HW is a hot food holding well with a stainless steel exterior. The hot well includes stainless steel interior walls with coved corners on two sides. HW and HWLF models are controlled by a single adjustable thermostat with a range of 1 through 10 and includes an indicator light. 200-HWI and 200-HWILF models are controlled by two (2) adjustable thermostats, one for each well, with a range of 1 through 10, each with an indicator light. The thermostat control is attached to the hot well base by a 72" (1829mm) flexible and water tight conduit. The hot well base is available in two depths. The 4-3/8" (111mm) deep hot well holds 4" (100mm) deep pans and the 6-3/8" (162mm) deep hot well holds 6" (150mm) deep pans. Both hot wells hold a combination of standard (gastronorm) pan sizes. The HW and HWLF hot wells include four (4) half/third-size pan divider bars and one (1) full-size pan divider bar. The HW/D443 and HW/D643 hot wells include six (6) half/third-size pan divider bars and one (1) large pan divider bar. The HWI and HWILF hot wells include four (4) half/third-size pan divider bars. The HWI/D443 and HWI/D643 hot wells include six (6) half/third-size pan divider bars.

MODEL 200-HW/D4: 4-3/8" (111mm) depth, accepts two (2) full-size (gastronorm) pans MODEL 200-HW/D6: 6-3/8" (162mm) depth, accepts two (2) full-size (gastronorm) pans MODEL 200-HW/D443: 4-3/8" (111mm) depth, accepts two (2) full-size (gastronorm) pans and two (2) third-size pans MODEL 200-HW/D643: 6-3/8" (162mm) depth, accepts two (2) full-size (gastronorm) pans and two (2) third-size pans MODEL 200-HWLF/D4: 4-3/8" (111mm) depth, accepts two (2) full-size (gastronorm) pans MODEL 200-HWLF/D6: 6-3/8" (162mm) depth, accepts two (2) full-size (gastronorm) pans MODEL 200-HWI/D4: 4-3/8" (111mm) depth, accepts two (2) full-size (gastronorm) pans MODEL 200-HWI/D6: 6-3/8" (162mm) depth, accepts two (2) full-size (gastronorm) pans MODEL 200-HWI/D443: 4-3/8" (111mm) depth, accepts two (2) full-size (gastronorm) pans and two (2) third-size pans MODEL 200-HWI/D643: 6-3/8" (162mm) depth, accepts two (2) full-size (gastronorm) pans and two (2) third-size pans MODEL 200-HWILF/D4: 4-3/8" (111mm) depth, accepts two (2) full-size (gastronorm) pans MODEL 200-HWILF/D6: 6-3/8" (162mm) depth, accepts two (2) full-size (gastronorm) pans

FactOry-InstaLLED OptIOns • Voltage Choices:

120V 208-240V 230V

• Control Box Cord Location: Back, Standard Bottom, Option

200-HW

200-HWLF

• The gentle heating capability of Halo Heat signifi cantly extends hot food holding life without

continuing the cooking process.• Provides a more appealing product with better

appearance and fresher taste.• Front-of-the-house use with an existing counter, overhead

heating, and sneeze guard system or drop into a prep table for hot food plating convenience.

• Easy drop-in installation without the need of water or drainage connections and the related installation and water usage costs.

• Maintenance savings with the elimination of lime and scale buildup associated with steam table holding.

• Increase employee safety with the elimination of burning steam when changing pans.

• Adjustable thermostat with remote control suitable for mounting provides holding temperature fl exibility without high steam table temperatures to scorch or burn.

• Stainless steel interior walls are easy to clean with coved corners on two sides of the well.

• HWI series with individual wells and independent controls expands your menu options.

IP X3

W164 N9221 Water Street • P.O. Box 450 • Menomonee Falls, Wisconsin 53052-0450 • U.S.A. PHONE: 262.251.3800 800.558.8744 U.S.A./CANADA FAX: 262.251.7067 800.329.8744 U.S.A. ONLY

www.alto-shaam.comD U E T O O N G O I N G P R O D U C T I M P R O V E M E N T , S P E C I F I C A T I O N S A R E S U B J E C T T O C H A N G E W I T H O U T N O T I C E . P R I N T E D I N U . S . A .#08B - 06/16

200-HW SERIES HOT FOOD HOLDiNG DrOP-iN WeLL

1-9/16"(39mm)

23-1

/8" (

586m

m)

20-3

/16"

(512

mm

)W

ELL

1-1/

2" (3

8mm

)

6-15/16" (175mm)

5" (127mm)

5"(126mm)

28-1/16" (712mm)

25" (635mm)WELL

200-HW/D4

1-9/16"(39mm)

28-1/16" (712mm)

25" (635mm)WELL

30-3

/16"

(765

mm

)

27-1

/4" (

691m

m)

WEL

L1-

1/2"

(38m

m)

1-7/

8"

(46m

m)

4-1/

8"

(104

mm

)

27-1

/4" (

691m

m)

WEL

L

29-1

/16"

(738

mm

)9/

16" (

14m

m) F

LAN

GE

4-3/8" (111mm)WELL

200-HW/D443

7-5/16" (185mm)5-9/16" (140mm)

26-5/8" (676mm)

3/4" (19mm)FLANGE

3/4" (19mm)FLANGE

6" (152mm)

Optional stainless steel heat shield(not factory supplied)

20-3

/16"

(512

mm

)W

ELL

22-1

/16"

(559

mm

)

4-3/8" (111mm)WELL

7-5/16" (185mm)5-9/16" (140mm)

1-7/

8"

(46m

m)

4-1/

8"

(104

mm

)

9/16

" (14

mm

) FLA

NG

E

6" (1

52m

m)

Conduit when exiting bottom

11" (278mm)

6"(152mm)

5" (126mm)

Conduit when exiting back4-

15/1

6"(1

25m

m) 4"

(102

mm

)

Ø 3/16"(5mm)

6-15/16" (175mm)

6-7/16"(163mm) 2-

1/2"

(63m

m)

4-15

/16"

(125

mm

)

1/4" (6mm)

3-3/16"(81mm)

31-3/8" (796mm)

25" (635mm)WELL

27-1

/16"

(686

mm

)

20-3

/16"

(512

mm

)W

ELL

3-7/

16" (

87m

m)

6-15/16" (175mm)

5" (127mm)

5"(126mm)

26-5/8" (676mm)

2-7/16" (60mm)FLANGE

2-7/16" (60mm)FLANGE

7-5/16" (185mm)

5-9/16" (141mm)

20-3

/16"

(512

mm

)W

ELL

22-1

/16"

(559

mm

)

2-1/

2" (6

3mm

)FL

ANG

E

4-3/8" (111mm)WELL 1-

7/8"

(46m

m)

4-1/

8" (1

04m

m)

6" (1

52m

m)

Conduit when exiting bottom

11" (278mm)

6"(152mm)

5" (126mm)

Conduit when exiting back

4-15

/16"

(125

mm

)4"

(102

mm

)

6-15/16" (175mm)

6-7/16" (163mm)

1/4" (6mm)

Ø 3/16" (5mm)

4-15

/16"

(125

mm

)

2-1/

2" (6

3mm

)

6" (152mm)

Optional stainless steel heat shield(not factory supplied)

200-HWLF/D4

200-HWLF SERIES HOT FOOD HOLDiNG DrOP-iN WeLL

INSTALLATION REQUIREMENTS- Appliance must be installed level and must not be installed in any area

where it may be directly affected by steam, grease, dripping water, high temperatures, or any other severely adverse conditions.

- To maintain proper food temperature, overhead heating is required.- Countertop material must withstand temperatures up to 200°F (93°C). - A stainless steel heat shield is recommended if the area under the

appliance is used for storage.

CLEARANCE REQUIREMENTS

1" (25mm) from combustible surfaces

OPTIONS & ACCESSORIES

Pan Divider Bar — HALF-SIZE/THIRD-SIZE . . . . . . . . . . . . . . . . . . . . . . 11318 Pan Divider Bar — FULL-SIZE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16019 Pan Divider Bar — D443/D643 SIZE . . . . . . . . . . . . . . . . . . . . . . . . . . 1012405 Locking Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5020849

200-HW PRODUCT\PAN CAPACITY* D4: 48 lb (22 kg) / D443: 64 lbs (29 kg) MAX.

MAX. VOLUME: D4: 29 qt (28 L) / D443: 37.8 qt (35.5 L)FULL-SIZE PANS: Two (2) 12" x 20" x 4"

GN 1/1 (325mm x 530mm x 100mm)HALF-SIZE PANS: Four (4) 12" x 10" x 4"

GN 1/2 (325mm x 265mm x 100mm)THIRD-SIZE PANS: D4: Six (6) 12" x 6" x 4" / D443: Eight (8) 12" x 6" x 4"

GN 1/3 (325mm x 176mm x 100mm)* Based on 4" (100mm) deep pans. Will also accept 2-1/2" (65mm) deep pans; D6 hot wells will accept 6" (150mm) deep pans.

W164 N9221 Water Street • P.O. Box 450 • Menomonee Falls, Wisconsin 53052-0450 • U.S.A. PHONE: 262.251.3800 800.558.8744 U.S.A./CANADA FAX: 262.251.7067 800.329.8744 U.S.A. ONLY

www.alto-shaam.comD U E T O O N G O I N G P R O D U C T I M P R O V E M E N T , S P E C I F I C A T I O N S A R E S U B J E C T T O C H A N G E W I T H O U T N O T I C E .P R I N T E D I N U . S . A .

26-5/8" (676mm)

9/16" (14mm)FLANGE

10-7/16" (264mm)

9-15/16" (252mm)1/4" (6mm)

Ø 3/16" (5mm)

4-15

/16"

(125

mm

)

2-1/

2" (6

3mm

)

23-3

/16"

(588

mm

)

20-3

/16"

(512

mm

)W

ELL

1-5/16" (33mm)

27-5/8" (701mm)

12" (305mm)WELL

10-7/16" (264mm)

WATERTIGHTCONDUIT

8-1/2" (216mm)

5"(126mm)

200-HWI/D4

7-5/16" (185mm)

5-9/16" (141mm)

20-3

/16"

(512

mm

)W

ELL

22-1

/16"

(559

mm

)

5/8"

(16m

m)

FLAN

GE

1-7/

8" (4

6mm

)

4-1/

8" (1

04m

m)

4-3/8" (111mm)WELL

1-1/2"(38mm) WATERTIGHT

CONDUIT

5"(126mm)

1-5/16" (33mm)

27-5/8" (701mm)

12" (305mm)WELL

30-1

/4" (

767m

m)

27-1

/4" (

691m

m)

WEL

L

10-7/16" (264mm)

8-1/2" (216mm)

200-HWI/D443

1-7/

8" (4

6mm

)

4-1/

8" (1

04m

m)

27-1

/4" (

691m

m)

WEL

L

29-1

/16"

(738

mm

)

5/8" (16mm)FLANGE

4-3/8" (111mm)WELL

7-5/16" (185mm)

5-9/16" (141mm)

6" (152mm)

Optional stainless steel heat shield(not factory supplied)

6" (1

52m

m)

Conduit when exiting bottom

11" (278mm)

6"(152mm)

5" (126mm)

Conduit when exiting back

4-15

/16"

(125

mm

)4"

(102

mm

)

#08B - 06/16

200-HWI series HOT FOOD HOLDiNG DrOP-iN WeLL

200-HWILF seriesHOT FOOD HOLDiNG DrOP-iN WeLL

4-15

/16"

(125

mm

)

2-1/

2" (6

3mm

)

10-7/16" (264mm)

9-15/16" (252mm)1/4" (6mm)

Ø 3/16" (5mm)

200-HWILF/D4

7-5/16" (185mm)

5-9/16" (141mm)

20-3

/16"

(512

mm

)W

ELL

22-1

/16"

(559

mm

)

2-1/

2" (6

3mm

)FL

ANG

E

1-7/

8" (4

6mm

)4-

1/8"

(104

mm

)

3-1/8" (79mm)

31-1/4" (792mm)

12" (305mm)WELL

27-1

/16"

(686

mm

)

20-3

/16"

(512

mm

)W

ELL

10-7/16" (264mm)

8-1/2" (216mm)

5"(126mm)

WATERTIGHTCONDUIT

3-7/

16" (

87m

m)

6" (1

52m

m)

Conduit when exiting bottom

11" (278mm)

6"(152mm)

5" (126mm)

Conduit when exiting back

4-15

/16"

(125

mm

)4"

(102

mm

)

26-5/8" (676mm)

2-5/16" (58mm)FLANGE

6" (152mm)

Optional stainless steel heat shield(not factory supplied)

W164 N9221 Water Street • P.O. Box 450 • Menomonee Falls, Wisconsin 53052-0450 • U.S.A. PHONE: 262.251.3800 800.558.8744 U.S.A./CANADA FAX: 262.251.7067 800.329.8744 U.S.A. ONLY

www.alto-shaam.comD U E T O O N G O I N G P R O D U C T I M P R O V E M E N T , S P E C I F I C A T I O N S A R E S U B J E C T T O C H A N G E W I T H O U T N O T I C E . P R I N T E D I N U . S . A .#08B - 06/16

DIMENSIONS:

OVERALL EXTERIOR WELL INTERIOR COUNTER CUTOUT CONTROL BOX CUTOUT*

height width depth height width depth width depth height width depth

200-HW/D4 7-5/16"(185mm)

28-1/16"(712mm)

23-1/8"(586mm)

4-3/8"(111mm)

25"(635mm)

20-3/16"(512mm)

27"(686mm)

22-1/2"(572mm)

4-1/4"(108mm)

5-1/4"(133mm)

10-13/16"(274mm)

200-HW/D6 9-5/16"(235mm)

28-1/16"(712mm)

23-1/8"(586mm)

6-3/8"(162mm)

25"(635mm)

20-3/16"(512mm)

27"(686mm)

22-1/2"(572mm)

4-1/4"(108mm)

5-1/4"(133mm)

10-13/16"(274mm)

200-HW/D443 7-5/16"(184mm)

28-1/16"(712mm)

30-3/16"(765mm)

4-3/8"(111mm)

12"(304mm)

27-1/4"(691mm)

27"(686mm)

29-1/2"(749mm)

4-1/4"(108mm)

5-1/4"(133mm)

10-13/16"(274mm)

200-HW/D643 9-3/16"(233mm)

28-1/16"(712mm)

30-3/16"(765mm)

6-3/8"(162mm)

12"(304mm)

27-1/4"(691mm)

27"(686mm)

29-1/2"(749mm)

4-1/4"(108mm)

5-1/4"(133mm)

10-13/16"(274mm)

200-HWLF/D4 7-5/16"(184mm)

31-3/8"(796mm)

27-1/16"(686mm)

4-3/8"(111mm)

25"(635mm)

20-3/16"(512mm)

27"(686mm)

22-1/2"(572mm)

4-1/4"(108mm)

5-1/4"(133mm)

10-13/16"(274mm)

200-HWLF/D6 9-1/4"(234mm)

31-3/8"(796mm)

27-1/16"(686mm)

6-3/8"(162mm)

25"(635mm)

20-3/16"(512mm)

27"(686mm)

22-1/2"(572mm)

4-1/4"(108mm)

5-1/4"(133mm)

10-13/16"(274mm)

200-HWI/D4 7-5/16"(185mm)

27-5/8"(701mm)

23-3/16"(588mm)

4-3/8"(111mm)

12"(304mm)

20-3/16"(512mm)

27"(686mm)

22-1/2"(572mm)

4-1/4"(108mm)

8-3/4"(222mm)

10-13/16"(274mm)

200-HWI/D6 9-5/16"(236mm)

27-5/8"(701mm)

23-3/16"(588mm)

6-3/8"(162mm)

12"(304mm)

20-3/16"(512mm)

27"(686mm)

22-1/2"(572mm)

4-1/4"(108mm)

8-3/4"(222mm)

10-13/16"(274mm)

200-HWI/D443 7-5/16"(185mm)

27-5/8"(701mm)

30-1/4"(767mm)

4-3/8"(111mm)

12"(304mm)

27-1/4"(691mm)

27"(686mm)

29-1/2"(749mm)

4-1/4"(108mm)

8-3/4"(222mm)

10-13/16"(274mm)

200-HWI/D643 9-1/4"(234mm)

27-5/8"(701mm)

30-1/4"(767mm)

6-3/8"(162mm)

12"(304mm)

27-1/4"(691mm)

27"(686mm)

29-1/2"(749mm)

4-1/4"(108mm)

8-3/4"(222mm)

10-13/16"(274mm)

200-HWILF/D4 7-5/16"(185mm)

31-1/4"(792mm)

27-1/16"(686mm)

4-3/8"(111mm)

12"(304mm)

20-3/16"(512mm)

27"(686mm)

22-1/2"(572mm)

4-1/4"(108mm)

8-3/4"(222mm)

10-13/16"(274mm)

200-HWILF/D6 9-5/16"(236mm)

31-1/4"(792mm)

27-1/16"(686mm)

6-3/8"(162mm)

12"(304mm)

20-3/16"(512mm)

27"(686mm)

22-1/2"(572mm)

4-1/4"(108mm)

8-3/4"(222mm)

10-13/16"(274mm)

*Allow 6" (152mm) clearance from control box to conduit bend

WEIGHT: est.net weight ship weight* carton dimensions* l x w x h

200-HW/D4 40 lb (18 kg) 115 lb (52 kg) 35" x 35" x 19" (889mm x 889mm x 483mm)

200-HW/D6 45.5 lb (21 kg) 110 lb (50 kg) 35" x 35" x 19" (889mm x 889mm x 483mm)

200-HW/D443 50 lb (23 kg) contact factory contact factory

200-HW/D643 56 lb (25 kg) 120 lb (54 kg) 40" x 32" x 15" (1016mm x 813mm x 381mm)

200-HWLF/D4 43 lb (20 kg) 100 lb (45 kg) 35" x 35" x 19" (889mm x 889mm x 483mm)

200-HWLF/D6 48 lb (22 kg) 110 lb (50 kg) 35" x 35" x 19" (889mm x 889mm x 483mm)

200-HWI/D4 50 lb (23 kg) 120 lb (54 kg) 35" x 35" x 19" (889mm x 889mm x 483mm)

200-HWI/D6 56.25 lb (26 kg) 116 lb (53 kg) 35" x 35" x 19" (889mm x 889mm x 483mm)

200-HWI/D443 62 lb (28 kg) contact factory contact factory

200-HWI/D643 69.5 lb (32 kg) 120 lb (54 kg) 35" x 35" x 26" (889mm x 889mm x 660mm)

200-HWILF/D4 54.25 lb (25 kg) 100 lb (45 kg) 35" x 35" x 19" (889mm x 889mm x 483mm)

200-HWILF/D6 60.5 lb (27 kg) 110 lb (50 kg) 35" x 35" x 19" (889mm x 889mm x 483mm)

* Domestic ground shipping information. Contact factory for export weight and dimensions.

ELECTRICAL:

VOLTAGE PHASE CYCLE/HZ AMPS kW PLUG CONFIGURATION

200-HW/D4 & /D6,200-HWLF/D4 & /D6,200-HWI/D4 & /D6,

200-HWILF/D4 & /D6

120 1 50/60 10.0 1.2 NEMA 5-15P15A - 125V PLUG

208 – 240 1 50/60 4.3 – 5.0 0.9 – 1.2 NEMA 6-15P15A - 250V PLUG

230 1 50/60 5.2 1.2 CEE 7/7PLUG RATED 250V

CH2-16PPLUG RATED 250V

BS1363PLUG RATED 250V

200-HW/D443,200-HW/D663,200-HWI/D443,200-HWI/D643

120 1 50/60 13.5 1.6 NEMA 5-20P20A - 125V PLUG

208 – 240 1 50/60 5.8 – 6.8 1.6 NEMA 6-15P15A - 250V PLUG

230 1 50/60 6.5 1.6 CEE 7/7PLUG RATED 250V

CH2-16PPLUG RATED 250V

BS1363PLUG RATED 250V

Cord Length: 120V - 6 ft. (1.8m) 208-240V - 9 ft. (2.7m) 230V (CEE) - 9 ft. (2.7m) 230V (CH, BS) - 8 ft. (2.5m)