Upload
willie-seo
View
332
Download
9
Embed Size (px)
DESCRIPTION
Applied Probability and Statistics Chapter 9 Solutions
Citation preview
Applied Statistics and Probability for Engineers, 5th edition March 15, 2010
9-1
CHAPTER 9 Section 9-1 9-1 a) 25:,25: 10 ≠= µµ HH Yes, because the hypothesis is stated in terms of the parameter of
interest, inequality is in the alternative hypothesis, and the value in the null and alternative hypotheses matches. b) 10:,10: 10 => σσ HH No, because the inequality is in the null hypothesis.
c) 50:,50: 10 ≠= xHxH No, because the hypothesis is stated in terms of the statistic rather than the parameter. d) 3.0:,1.0: 10 == pHpH No, the values in the null and alternative hypotheses do not match and both of the hypotheses are equality statements. e) 30:,30: 10 >= sHsH No, because the hypothesis is stated in terms of the statistic rather than the parameter.
9-2 The conclusion does not provide strong evidence that the critical dimension mean equals 100nm. There is not sufficient evidence to reject the null hypothesis.
9-3 a) nmHnmH 20:,20: 10 <= σσ
b) This result does not provide strong evidence that the standard deviation has not been reduced. There is insufficient evidence to reject the null hypothesis but this is not strong support for the null hypothesis.
9-4 a) NewtonsHNewtonsH 25:,25: 10 <= µµ
b) No, this result only implies that we do not have enough evidence to support H1. 9-5 a) α = P(reject H0 when H0 is true)
= P( X ≤ 11.5 when µ = 12) = ⎟⎟⎠
⎞⎜⎜⎝
⎛ −≤
−
4/5.0125.11
/ nXPσ
µ= P(Z ≤ −2)
= 0.02275. The probability of rejecting the null hypothesis when it is true is 0.02275.
b) β = P(accept H0 when µ = 11.25) = ( )25.11|5.11 => µXP
= ⎟⎟⎠
⎞⎜⎜⎝
⎛ −>
−
4/5.025.115.11
/ nXPσ
µ = P(Z > 1.0)
= 1 − P(Z ≤ 1.0) = 1 − 0.84134 = 0.15866 The probability of accepting the null hypothesis when it is false is 0.15866.
c) β = P(accept H0 when µ = 11.25) =
= ( )5.11|5.11 => µXP = ⎟⎟⎠
⎞⎜⎜⎝
⎛ −>
−
4/5.05.115.11
/ nXPσ
µ
= P(Z > 0) = 1 − P(Z ≤ 0) = 1 − 0.5 = 0.5 The probability of accepting the null hypothesis when it is false is 0.5
9-6 a) α = P( ≤ 11.5 | µ = 12) = ⎟⎟⎠
⎞⎜⎜⎝
⎛ −≤
−
16/5.0125.11
/ nXPσ
µ= P(Z ≤ −4) = 0.
The probability of rejecting the null hypothesis when it is true is approximately 0 with a sample size of 16.
Applied Statistics and Probability for Engineers, 5th edition March 15, 2010
9-2
b) β = P( > 11.5 | µ =11.25) = ⎟⎟⎠
⎞⎜⎜⎝
⎛ −>
−
16/5.025.115.11
/ nXPσ
µ
= P(Z > 2) = 1 − P(Z ≤ 2)= 1− 0.97725 = 0.02275. The probability of accepting the null hypothesis when it is false is 0.02275.
c) β = P( > 11.5 | µ =11.5) = ⎟⎟⎠
⎞⎜⎜⎝
⎛ −>
−
16/5.05.115.11
/ nXPσ
µ
= P(Z > 0) = 1 − P(Z ≤ 0) = 1− 0.5 = 0.5 The probability of accepting the null hypothesis when it is false is 0.5.
9-7 The critical value for the one-sided test is
nzX /5.012 α−≤
a) α = 0.01, n = 4, from Table III -2.33 = zα and X ≤ 11.42
b) α = 0.05, n = 4, from Table III -1.65 = zα and X ≤ 11.59
c) α = 0.01, n = 16, from Table III -2.33 = zα and X ≤ 11.71
d) α = 0.05, n = 16, from Table III -1.65 = zα and X ≤ 11.95
9-8 a) β = P( X >11.59|µ=11.5) = P(Z>0.36) = 1-0.6406 = 0.3594
b) β = P( X >11.79|µ=11.5) = P(Z>2.32) = 1-0.9898 = 0.0102 c) Notice that the value of β decreases as n increases
9-9 a) x =11.25, then P-value= 00135.0)3(4/5.01225.11
=−≤=⎟⎠
⎞⎜⎝
⎛ −≤ ZPZP
b) x =11.0, then P-value= 000033.0)4(4/5.0120.11
≤−≤=⎟⎠
⎞⎜⎝
⎛ −≤ ZPZP
c) x =11.75, then P-value= 158655.0)1(4/5.01275.11
=−≤=⎟⎠
⎞⎜⎝
⎛ −≤ ZPZP
9-10 a) α = P( X ≤ 98.5) + P( X > 101.5)
= ⎟⎟⎠
⎞⎜⎜⎝
⎛ −≤
−
9/21005.98
9/2100XP + ⎟⎟
⎠
⎞⎜⎜⎝
⎛ −>
−
9/21005.101
9/2100XP
= P(Z ≤ −2.25) + P(Z > 2.25) = (P(Z ≤- 2.25)) + (1 − P(Z ≤ 2.25)) = 0.01222 + 1 − 0.98778 = 0.01222 + 0.01222 = 0.02444
b) β = P(98.5 ≤ X ≤ 101.5 when µ = 103)
= ⎟⎟⎠
⎞⎜⎜⎝
⎛ −≤
−≤
−
9/21035.101
9/2103
9/21035.98 XP
= P(−6.75 ≤ Z ≤ −2.25) = P(Z ≤ −2.25) − P(Z ≤ −6.75) = 0.01222 − 0 = 0.01222
Applied Statistics and Probability for Engineers, 5th edition March 15, 2010
9-3
c) β = P(98.5 ≤ X ≤ 101.5 | µ = 105)
= ⎟⎟⎠
⎞⎜⎜⎝
⎛ −≤
−≤
−
9/21055.101
9/2105
9/21055.98 XP
= P(−9.75 ≤ Z ≤ −5.25) = P(Z ≤ −5.25) − P(Z ≤ −9.75) = 0 − 0 = 0
The probability of accepting the null hypothesis when it is actually false is smaller in part (c) because the true mean, µ = 105, is further from the acceptance region. There is a greater difference between the true mean and the hypothesized mean.
9-11 Use n = 5, everything else held constant (from the values in exercise 9-6): a) P( ≤ 98.5) + P( >101.5)
= ⎟⎟⎠
⎞⎜⎜⎝
⎛ −≤
−
5/21005.98
5/2100XP + ⎟⎟
⎠
⎞⎜⎜⎝
⎛ −>
−
5/21005.101
5/2100XP
= P(Z ≤ −1.68) + P(Z > 1.68) = P(Z ≤ −1.68) + (1 − P(Z ≤ 1.68)) = 0.04648 + (1 − 0.95352) = 0.09296
b) β = P(98.5 ≤ X ≤ 101.5 when µ = 103)
= ⎟⎟⎠
⎞⎜⎜⎝
⎛ −≤
−≤
−
5/21035.101
5/2103
5/21035.98 XP
= P(−5.03 ≤ Z ≤ −1.68) = P(Z ≤ −1.68) − P(Z ≤ −5.03) = 0.04648 − 0 = 0.04648
c) β = P(98.5 ≤ ≤ 101.5 when µ = 105)
= ⎟⎟⎠
⎞⎜⎜⎝
⎛ −≤
−≤
−
5/21055.101
5/2105
5/21055.98 XP
= P(−7.27≤ Z ≤ −3.91) = P(Z ≤ −3.91) − P(Z ≤ −7.27) = 0.00005 − 0 = 0.00005 It is smaller because it is not likely to accept the product when the true mean is as high as 105.
9-12 ⎟⎟⎠
⎞⎜⎜⎝
⎛+≤≤⎟⎟
⎠
⎞⎜⎜⎝
⎛−
nzX
nz σ
µσ
µ αα 2/02/0 , where σ =2
a) α = 0.01, n = 9, then 2/αz =2,57, then 71.101,29.98 b) α = 0.05, n = 9, then 2/αz =1.96, then 31.101,69.98 c) α = 0.01, n = 5, then 2/αz = 2.57, then 30.102,70.97 d) α = 0.05, n = 5, then 2/αz =1.96, then 75.101,25.98
9-13 δ =103-100=3
Applied Statistics and Probability for Engineers, 5th edition March 15, 2010
9-4
δ >0 then ⎟⎟⎠
⎞⎜⎜⎝
⎛−Φ=
σδ
β α
nz 2/ , where σ =2
a) β = P(98.69< X <101.31|µ=103) = P(-6.47<Z<-2.54) = 0.0055
b) β = P(98.25< X <101.75|µ=103) = P(-5.31<Z<-1.40) = 0.0808 a) As n increases, β decreases
9-14 a) P-value = 2(1- )( 0ZΦ ) = 2(1- )9/210098( −
Φ ) = 2(1- )3(Φ ) = 2(1-0.99865) = 0.0027
b) P-value = 2(1- )( 0ZΦ ) = 2(1- )9/2100101( −
Φ ) = 2(1- )5.1(Φ ) = 2(1-0.93319) = 0.13362
c) P-value = 2(1- )( 0ZΦ ) = 2(1- )9/2100102( −
Φ ) = 2(1- )3(Φ ) = 2(1-0.99865) = 0.0027
9-15 a) α = P( X > 185 when µ = 175)
= ⎟⎟⎠
⎞⎜⎜⎝
⎛ −>
−
10/20175185
10/20175XP
= P(Z > 1.58) = 1 − P(Z ≤ 1.58) = 1 − 0.94295 = 0.05705
b) β = P( X ≤ 185 when µ = 185)
= ⎟⎟⎠
⎞⎜⎜⎝
⎛ −≤
−
10/20185185
10/20185XP
= P(Z ≤ 0) = 0.5
c) β = P( X ≤ 185 when µ = 195)
= ⎟⎟⎠
⎞⎜⎜⎝
⎛ −≤
−
10/20195185
10/20195XP
= P(Z ≤ −1.58) = 0.05705 9-16 Using n = 16:
a) α = P( X > 185 when µ = 175)
= ⎟⎟⎠
⎞⎜⎜⎝
⎛ −>
−
16/20175185
16/20175XP
= P(Z > 2) = 1 − P(Z ≤ 2) = 1 − 0.97725 = 0.02275
b) β = P( X ≤ 185 when µ = 185)
= ⎟⎟⎠
⎞⎜⎜⎝
⎛ −≤
−
16/20185185
16/20195XP
Applied Statistics and Probability for Engineers, 5th edition March 15, 2010
9-5
= P(Z ≤ 0) = 0.5
c) β = P( X ≤ 185 when µ = 195)
= ⎟⎟⎠
⎞⎜⎜⎝
⎛ −≤
−
16/20195185
16/20195XP
= P(Z ≤ −2) = 0.02275
9-17 ⎟⎟⎠
⎞⎜⎜⎝
⎛+≥
nZX 20175 α
a) α = 0.01, n = 10, then αz =2.32 and critical value is 189.67
b) α = 0.05, n = 10, then αz =1.64 and critical value is 185.93
c) α = 0.01, n = 16, then αz = 2.32 and critical value is 186.6
d) α = 0.05, n = 16, then αz =1.64 and critical value is 183.2 9-18 a) α = 0.05, n =10, then the critical value 185.93 (from 9-17 part (b))
β = P( X ≤ 185.37 when µ = 185)
= ⎟⎟⎠
⎞⎜⎜⎝
⎛ −≤
−
10/2018593.185
10/20185XP
= P(Z ≤ 0.147) = 0.5584 b) α = 0.05, n =16, then the critical value 183.2 (from 9-17(d)), then
β = P( X ≤ 183.2 when µ = 185)
= ⎟⎟⎠
⎞⎜⎜⎝
⎛ −≤
−
16/201852.183
16/20185XP
= P(Z ≤ -0.36) = 0.3594 c) as n increases, β decreases
9-19 P-value = 1 – )( 0ZΦ ) where n
XZ/
00
σµ−
=
a) X = 180 then 79.010/20175180
0 =−
=Z
P-value = 1- 2148.07852.01)79.0( =−=Φ
b) X = 190 then 37.210/20175190
0 =−
=Z
P-value = 1- 008894.0991106.01)37.2( =−=Φ
c) X =170 then 79.010/20175170
0 −=−
=Z
P-value = 1- 785236.0214764.01)79.0( =−=−Φ
9-20 a) α = P( X ≤ 4.85 when µ = 5) + P( X > 5.15 when µ = 5)
Applied Statistics and Probability for Engineers, 5th edition March 15, 2010
9-6
= ⎟⎟⎠
⎞⎜⎜⎝
⎛ −≤
−
8/25.0585.4
8/25.05XP + ⎟⎟
⎠
⎞⎜⎜⎝
⎛ −>
−
8/25.0515.5
8/25.05XP
= P(Z ≤ −1.7) + P(Z > 1.7) = P(Z ≤ −1.7) + (1 − P(Z ≤ 1.7) = 0.04457 + (1 − 0.95543) = 0.08914 b) Power = 1 − β
β = P(4.85 ≤ X ≤ 5.15 when µ = 5.1)
= ⎟⎟⎠
⎞⎜⎜⎝
⎛ −≤
−≤
−
8/25.01.515.5
8/25.01.5
8/25.01.585.4 XP
= P(−2.83 ≤ Z ≤ 0.566) = P(Z ≤ 0.566) − P(Z ≤ −2.83) = 0.71566 − 0.00233 = 0.71333 1 − β = 0.2867 9-21 Using n = 16: a) α = P( ≤ 4.85 | µ = 5) + P( > 5.15 | µ = 5)
= ⎟⎟⎠
⎞⎜⎜⎝
⎛ −≤
−
16/25.0585.4
16/25.05XP + ⎟⎟
⎠
⎞⎜⎜⎝
⎛ −>
−
16/25.0515.5
16/25.05XP
= P(Z ≤ −2.4) + P(Z > 2.4) = P(Z ≤ −2.4) +(1 − P(Z ≤ 2.4)) = 2(1 − P(Z ≤ 2.4)) = 2(1 − 0.99180) = 2(0.0082) = 0.0164
b) β = P(4.85 ≤ ≤ 5.15 | µ = 5.1)
= ⎟⎟⎠
⎞⎜⎜⎝
⎛ −≤
−≤
−
16/25.01.515.5
16/25.01.5
16/25.01.585.4 XP
= P(−4 ≤ Z ≤ 0.8) = P(Z ≤ 0.8) − P(Z ≤ −4) = 0.78814 − 0 = 0.78814 1 − β = 0.21186
c) With larger sample size, the value of α decreased from approximately 0.089 to 0.016. The power declined modestly from 0.287 to 0.211 while the value for α declined substantially. If the test with n = 16 were conducted at the α value of 0.089, then it would have greater power than the test with n = 8.
9-22 5,25.0 0 == µσ
a) α = 0.01, n = 8 then
a = nz /2/0 σµ α+ =5+2.57*.25/ 8 =5.22 and
b = nz /2/0 σµ α− =5-2.57*.25/ 8 =4.77 b) α = 0.05, n = 8 then
a = nZ /*2/0 σµ α+ =5+1.96*.25/ 8 =5.1732 and
b = nz /2/0 σµ α− =5-1.96*.25/ 8 =4.8267
c) α = 0.01, n =16 then
a= nz /2/0 σµ α+ =5+2.57*.25/ 16 =5.1606 and
Applied Statistics and Probability for Engineers, 5th edition March 15, 2010
9-7
b= nz /2/0 σµ α− =5-2.57*.25/ 16 =4.8393
d) α = 0.05, n =16 then
a= nz /2/0 σµ α+ =5+1.96*.25/ 16 =5.1225 and
b= nz /2/0 σµ α− =5-1.96*.25/ 16 =4.8775
9-23 P-value=2(1 - )( 0ZΦ ) where n
xz
/0
0σ
µ−=
a) x = 5.2 then 26.28/25.52.5
0 =−
=z
P-value = 2(1- 0238.0)988089.01(2))26.2( =−=Φ
b) x = 4.7 then 39.38/25.57.4
0 −=−
=z
P-value = 2(1- 0007.0)99965.01(2))39.3( =−=Φ
c) x = 5.1 then 1313.18/25.51.5
0 =−
=z
P-value = 2(1- 2585.0)870762.01(2))1313.1( =−=Φ
9-24 a) β = P(4.845< X <5.155|µ = 5.05) = P(-2.59<Z<1.33) = 0.9034
b) β = P(4.8775< X <5.1225|µ = 5.05) = P(-2.76<Z<1.16) = 0.8741 c) As n increases, β decreases
9-25 X ~ bin(15, 0.4) H0: p = 0.4 and H1: p ≠ 0.4 p1= 4/15 = 0.267 p2 = 8/15 = 0.533 Accept Region: 533.0ˆ267.0 ≤≤ p
Reject Region: 267.0ˆ <p or 533.0ˆ >p Use the normal approximation for parts a) and b) a) When p = 0.4, )533.0ˆ()267.0ˆ( >+<= pPpPα
29372.014686.014686.0
))05.1(1()05.1()05.1()05.1(
15)6.0(4.04.0533.0
15)6.0(4.04.0267.0
=
+=
<−+−<=
>+−<=
⎟⎟⎟⎟
⎠
⎞
⎜⎜⎜⎜
⎝
⎛−
>+
⎟⎟⎟⎟
⎠
⎞
⎜⎜⎜⎜
⎝
⎛−
<=
ZPZPZPZP
ZPZP
b) When p = 0.2
Applied Statistics and Probability for Engineers, 5th edition March 15, 2010
9-8
⎟⎟⎟⎟⎟
⎠
⎞
⎜⎜⎜⎜⎜
⎝
⎛
−≤≤
−=≤≤=
15)8.0(2.02.0533.0
15)8.0(2.02.0267.0)533.0ˆ267.0( ZPpPβ
2572.074215.099936.0
)65.0()22.3()22.365.0(
=
−=
≤−≤=
≤≤=
ZPZPZP
9-26 X ~ Bin(10, 0.3) Implicitly, H0: p = 0.3 and H1: p < 0.3 n = 10 Accept region: 1.0ˆ >p
Reject region: 1.0ˆ ≤p Use the normal approximation for parts a), b) and c):
a) When p =0.3 α = ( )⎟⎟⎟⎟
⎠
⎞
⎜⎜⎜⎜
⎝
⎛
−≤=<
10)7.0(3.03.01.01.0ˆ ZPpP
08379.0
)38.1(=
−≤= ZP
b) When p = 0.2 β = ( )⎟⎟⎟⎟
⎠
⎞
⎜⎜⎜⎜
⎝
⎛
−>=>
10)8.0(2.02.01.01.0ˆ ZPpP
78524.0)79.0(1
)79.0(
=
−<−=
−>=
ZPZP
c) Power = 1 − β = 1 − 078524 = 0.21476
9-27 The problem statement implies H0: p = 0.6, H1: p > 0.6 and defines an acceptance region as 80.0500400ˆ =≤p and
rejection region as 80.0ˆ >p
a) α=P( p̂ >0.80 | p=0.60) = P
⎟⎟⎟⎟
⎠
⎞
⎜⎜⎜⎜
⎝
⎛
−>
500)4.0(6.060.080.0Z
= P(Z>9.13)=1-P(Z≤ 9.13) ≈ 0 b) β = P( p̂ ≤ 0.8 when p=0.75) = P(Z ≤ 2.58)=0.99506
9-28 a) Operating characteristic curve:
Applied Statistics and Probability for Engineers, 5th edition March 15, 2010
9-9
= β
1 − β
178 P(Z ≤ 1.11) = 0.8665 0.1335 181 P(Z ≤ 0.63) = 0.7357 0.2643 184 P(Z ≤ 0.16) = 0.5636 0.4364 187 P(Z ≤ −0.32) = 0.3745 0.6255 190 P(Z ≤ −0.79) = 0.2148 0.7852 193 P(Z ≤ −1.26) = 0.1038 0.8962 196 P(Z ≤ −1.74) = 0.0409 0.9591 199 P(Z ≤ −2.21) = 0.0136 0.9864
b)
175 180 185 190 195 200µ
0
0.2
0.4
0.6
0.8
1
1 − β
Power Function Curve
Section 9-2 9-29 a) 10:,10: 10 >= µµ HH
b) 7:,7: 10 ≠= µµ HH
Applied Statistics and Probability for Engineers, 5th edition March 15, 2010
9-10
c) 5:,5: 10 <= µµ HH
9-30 a) α = 0.01, then a = 2/αz = 2.57 and b = - 2/αz = -2.57
b) α = 0.05, then a = 2/αz = 1.96 and b = - 2/αz = -1.96
c) α = 0.1, then a = 2/αz = 1.65 and b = - 2/αz = -1.65
9-31 a) α = 0.01, then a = αz ≅ 2.33
b) α = 0.05, then a = αz ≅ 1.64
c) α = 0.1, then a = αz ≅ 1.29 9-32 a) α = 0.01, then a = α−1z ≅ -2.33
b) α = 0.05, then a = α−1z ≅ -1.64
c) α = 0.1, then a = α−1z ≅ -1.29
9-33 a) P-value = 2(1- )( 0ZΦ ) = 2(1- )05.2(Φ )≅ 0.04
b) P-value = 2(1- )( 0ZΦ ) = 2(1- )84.1(Φ )≅ 0.066
c) P-value = 2(1- )( 0ZΦ ) = 2(1- )4.0(Φ )≅ 0.69
9-34 a) P-value = 1- )( 0ZΦ = 1- )05.2(Φ ≅ 0.02
b) P-value = 1- )( 0ZΦ = 1- )84.1(−Φ ≅ 0.97
c) P-value = 1- )( 0ZΦ = 1- )4.0(Φ ≅ 0.34
9-35 a) P-value = )( 0ZΦ = )05.2(Φ ≅ 0.98
b) P-value = )( 0ZΦ = )84.1(−Φ ≅ 0.03
c) P-value = )( 0ZΦ = )4.0(Φ ≅ 0.65
9-36 a) SE Mean from the sample standard deviation 295.025475.1
===Nσ
9722.125/8.135710.35
0 =−
=z
P-value = [ ] [ ] [ ] 0486.09757.012)9722.1(12)(12 0 =−=Φ−=Φ− Z
P-value < α = 0.05, then we reject the null hypothesis that µ = 35 at the 0.05 level of significance. b) A two-sided test because the alternative hypothesis is mu not = 35.
c) 95% CI of the mean is n
zxn
zx σµ
σ025.0025.0 +<<−
258.1)96.1(710.35
258.1)96.1(710.35 +<<− µ
4156.360044.35 << µ
d) P-value = 0243.09757.01)9722.1(1)(1 0 =−=Φ−=Φ− Z
Applied Statistics and Probability for Engineers, 5th edition March 15, 2010
9-11
9-37 a) StDev = N (SE Mean) = 0.7495
468.010/75.020889.19
0 −=−
=z
P-value = 6801.03199.01)468.0(1)(1 0 =−=−Φ−=Φ− Z
Because P-value > α = 0.05 we fail to reject the null hypothesis that µ = 20 at the 0.05 level of significance. b) A one-sided test because the alternative hypothesis is mu > 20.
c) 95% CI of the mean is n
zxn
zx σµ
σ025.0025.0 +<<−
1075.0)96.1(889.19
1075.0)96.1(889.19 +<<− µ
3539.204242.19 << µ
d) P-value = [ ] [ ] [ ] 6398.06801.012)468.0(12)(12 0 =−=Φ−=Φ− Z
9-38 a) SE Mean from the sample standard deviation 2538.016015.1
===Ns
8764.116/1.15.14016.15
0 =−
=z
P-value= 0303.09697.01)8764.1(1)(1 0 =−=Φ−=Φ− Z
Because P-value < α = 0.05 we reject the null hypothesis that µ = 14.5 at the 0.05 level of significance. b) A one-sided test because the alternative hypothesis is mu > 14.5.
c) 95% lower CI of the mean is µσ
≤−n
zx 05.0
µ≤−161.1)645.1(016.15
µ≤5636.14
d) P-value = [ ] [ ] [ ] 0606.09697.012)8764.1(12)(12 0 =−=Φ−=Φ− Z
9-39 a) SE Mean from the sample standard deviation 6827.012365.2
===Ns
b) A one-sided test because the alternative hypothesis is mu > 99.
c) If the null hypothesis is changed to the µ = 98, 8253.212/5.298039.100
0 =−
=z
Because )8253.2(Φ is close to 1, the P-value = )8253.2(1 Φ− = 0.002 is very small and close to 0. Thus, the P-value < α = 0.05, and we reject the null hypothesis at the 0.05 level of significance.
d) 95% lower CI of the mean is µσ
≤−n
zx 05.0
µ≤−125.2)645.1(039.100
µ≤8518.98
e) If the alternative hypothesis is changed to the mu ≠ 99, 4397.112/5.299039.100
0 =−
=z
P-value = 15.0]9250.01[2)]4397.1(1[2)](1[2 0 =−=Φ−=Φ− Z
Because the P-value > α = 0.05 we fail to reject the null hypothesis at the 0.05 level of significance.
Applied Statistics and Probability for Engineers, 5th edition March 15, 2010
9-12
9-40 a) 1) The parameter of interest is the true mean water temperature, µ. 2) H0 : µ = 100 3) H1 : µ > 100
4)
5) Reject H0 if z0 > zα where α = 0.05 and z0.05 = 1.65 6) 98=x , σ = 2
0.39/210098
0 −=−
=z
7) Because -3.0 < 1.65 fail to reject H0. The water temperature is not significantly greater than 100 at α = 0.05. b) P-value = 99865.000135.01)0.3(1 =−=−Φ−
c) ⎟⎟⎠
⎞⎜⎜⎝
⎛ −+Φ=
9/2104100
05.0zβ
= Φ(1.65 + −6) = Φ(-4.35) ≅0 9-41 a) 1) The parameter of interest is the true mean crankshaft wear, µ. 2) H0 : µ = 3 3) H1 : µ ≠ 3
4)
5) Reject H0 if z0 < −z α/2 where α = 0.05 and −z0.025 = −1.96 or z0 > zα/2 where α = 0.05 and z0.025 = 1.96 6) = 2.78, σ = 0.9
95.015/9.0378.2
0 −=−
=z
7) Because –0.95 > -1.96 fail to reject the null hypothesis. There is not sufficient evidence to support the claim the mean crankshaft wear differs from 3 at α = 0.05.
b) ⎟⎟⎠
⎞⎜⎜⎝
⎛ −+−Φ−⎟⎟
⎠
⎞⎜⎜⎝
⎛ −+Φ=
15/9.025.33
15/9.025.33
025.0025.0 zzβ
= Φ(1.96 + −1.08) − Φ(−1.96 + −1.08) = Φ(0.88) − Φ(-3.04) = 0.81057 − (0.00118) = 0.80939
c) ( ) ( )
,21.15)75.0(
)9.0()29.196.1()375.3( 2
22
2
2210.0025.0
2
222/ =
+=
−
+=
+=
σδ
σβα zzzzn 16≅n
9-42 a) 1) The parameter of interest is the true mean melting point, µ. 2) H0 : µ = 155 3) H1 : µ ≠ 155
4)
5) Reject H0 if z0 < −z α/2 where α = 0.01 and −z0.005 = −2.58 or z0 > zα/2 where α = 0.01 and z0.005 = 2.58 6) = 154.2, σ = 1.5
69.110/5.11552.154
0 −=−
=z
7) Because –1.69 > -2.58 fail to reject the null hypothesis. There is not sufficient evidence to support the claim the mean melting point differs from 155 °F at α = 0.01.
Applied Statistics and Probability for Engineers, 5th edition March 15, 2010
9-13
b) P-value = 2*P(Z <- 1.69) =2* 0.045514 = 0.091028
c)
⎟⎟⎠
⎞⎜⎜⎝
⎛ −−−Φ−⎟
⎟⎠
⎞⎜⎜⎝
⎛ −−Φ=
⎟⎟⎠
⎞⎜⎜⎝
⎛−−Φ−⎟
⎟⎠
⎞⎜⎜⎝
⎛−Φ=
5.110)150155(58.2
5.110)150155(58.2
005.0005.0 σδ
σδ
βnznz
= Φ(-7.96)- Φ(-13.12) = 0 – 0 = 0
d)
( ) ( )
,35.1)5(
)5.1()29.158.2()155150( 2
22
2
2210.0005.0
2
222/ =
+=
−
+=
+=
σδ
σβα zzzzn
n ≅ 2. 9-43 a) 1) The parameter of interest is the true mean battery life in hours, µ. 2) H0 : µ = 40 3) H1 : µ > 40
4)
5) Reject H0 if z0 > zα where α = 0.05 and z0.05 = 1.65 6) 5.40=x , σ = 1.25
26.110/25.1405.40
0 =−
=z
7) Because 1.26 < 1.65 fail to reject H0 and conclude the battery life is not significantly greater than 40 at α = 0.05.
b) P-value = 1038.08962.01)26.1(1 =−=Φ−
c) ⎟⎟⎠
⎞⎜⎜⎝
⎛ −+Φ=
10/25.14240
05.0zβ
= Φ(1.65 + −5.06) = Φ(-3.41) ≅ 0.000325
d) ( ) ( )
,844.0)4(
)25.1()29.165.1()4440( 2
22
2
2210.005.0
2
22
=+
=−
+=
+=
σδ
σβα zzzzn 1≅n
e) 95% Confidence Interval
µµ
µσ
≤
≤−
≤−
85.3910/)25.1(65.15.40
/05.0 nzx
The lower bound of the 90 % confidence interval must be greater than 40 to verify that the true mean exceeds 40 hours.
9-44 a)
1) The parameter of interest is the true mean tensile strength, µ. 2) H0 : µ = 3500 3) H1 : µ ≠ 3500
4)
5) Reject H0 if z0 < −zα/2 where α = 0.01 and −z0.005 = −2.58 or z0 > zα/2 where α = 0.01 and z0.005 = 2.58
Applied Statistics and Probability for Engineers, 5th edition March 15, 2010
9-14
6) 3450=x , σ = 60
89.212/6035003450
0 −=−
=z
7) Because −2.89 < −2.58, reject the null hypothesis and conclude the true mean tensile strength is significantly different from 3500 at α = 0.01.
b) Smallest level of significance =
P-value = 2[1 − (2.89) ]= 2[1 − .998074] = 0.004 The smallest level of significance at which we are willing to reject the null hypothesis is 0.004.
c) δ = 3470 – 3500 = -30
0.005 0.005
(3470 3500) 12 (3470 3500) 122.58 2.5860 60
n nz zδ δβ
σ σ
⎛ ⎞ ⎛ ⎞=Φ − − Φ − −⎜ ⎟ ⎜ ⎟
⎝ ⎠ ⎝ ⎠
⎛ ⎞ ⎛ ⎞− −=Φ − − Φ − −⎜ ⎟ ⎜ ⎟
⎝ ⎠ ⎝ ⎠
= Φ(4.312)- Φ(-0.848) = 1 – 0.1982 = 0.8018
d) zα/2 = z0.005 = 2.58
0.005 0.005x z x zn nσ σ
µ⎛ ⎞ ⎛ ⎞− ≤ ≤ +⎜ ⎟ ⎜ ⎟
⎝ ⎠ ⎝ ⎠
60 603450 2.58 3450 2.5812 12
µ⎛ ⎞ ⎛ ⎞− ≤ ≤ +⎜ ⎟ ⎜ ⎟
⎝ ⎠ ⎝ ⎠
3405.313≤ µ ≤ 3494.687
With 99% confidence, the true mean tensile strength is between 3405.313 psi and 3494.687 psi. We can test the hypotheses that the true mean tensile strength is not equal to 3500 by noting that the value is not within the confidence interval. Hence we reject the null hypothesis.
9-45 a) 1) The parameter of interest is the true mean speed, µ. 2) H0 : µ = 100 3) H1 : µ < 100
4)
5) Reject H0 if z0 < −zα where α = 0.05 and −z0.05 = −1.65 6) 2.102=x , σ = 4
56.18/41002.102
0 =−
=z
7) Because 1.56 > −1.65 fail to reject the null hypothesis. There is insufficient evidence to conclude that the true mean speed is less than 100 at α = 0.05.
b) 56.10 =z , then P-value= 94.0)( 0 ≅Φ z
c) ⎟⎟⎠
⎞⎜⎜⎝
⎛ −−−Φ−=
48)10095(1 05.0zβ = 1-Φ(-1.65 - −3.54) = 1-Φ(1.89) = 0.02938
Applied Statistics and Probability for Engineers, 5th edition March 15, 2010
9-15
Power = 1-β = 1-0.02938 = 0.97062
d) n =( ) ( )
,597.4)5(
)4()03.165.1()10095( 2
22
2
2215.005.0
2
22
=+
=−
+=
+ σδ
σβα zzzz n ≅ 5
e) ⎟⎟⎠
⎞⎜⎜⎝
⎛+≤
nzx σ
µ 05.0
53.1048465.12.102
≤
⎟⎟⎠
⎞⎜⎜⎝
⎛+≤
µ
µ
Because 100 is included in the CI we don’t have enough evidence to reject the null hypothesis. 9-46 a) 1) The parameter of interest is the true mean hole diameter, µ. 2) H0 : µ = 1.50 3) H1 : µ ≠ 1.50
4) z xn0 =
− µ
σ /
5) Reject H0 if z0 < −zα/2 where α = 0.01 and −z0.005 = −2.58 or z0 > zα/2 where z0.005 = 2.58 6) 4975.1=x , σ = 0.01
25.125/01.050.14975.1
0 −=−
=z
7) Because −2.58 < -1.25 < 2.58 fail to reject the null hypothesis. The true mean hole diameter is not significantly different from 1.5 in. at α = 0.01.
b) P-value=2(1- )( 0ZΦ )=2(1- )25.1(Φ )≅ 0.21
c)
⎟⎟⎠
⎞⎜⎜⎝
⎛ −−−Φ−⎟
⎟⎠
⎞⎜⎜⎝
⎛ −−Φ=
⎟⎟⎠
⎞⎜⎜⎝
⎛−−Φ−⎟
⎟⎠
⎞⎜⎜⎝
⎛−Φ=
01.025)5.1495.1(58.2
01.025)5.1495.1(58.2
005.0005.0 σδ
σδ
βnznz
= Φ(5.08) - Φ(-0.08) = 1 – 0.46812 = 0.53188 power=1-β=0.46812.
d) Set β = 1 − 0.90 = 0.10
n = 2
222/ )(δ
σβα zz + =
2
2210.0005.0
)50.1495.1()(
−
+ σzz ≅ 2
22
)005.0()01.0()29.158.2(
−
+ = 59.908,
n ≅ 60.
e) For α = 0.01, zα/2 = z0.005 = 2.58
⎟⎠
⎞⎜⎝
⎛+≤≤⎟
⎠
⎞⎜⎝
⎛−
nzx
nzx σ
µσ
005.0005.0
⎟⎟⎠
⎞⎜⎜⎝
⎛+≤≤⎟⎟
⎠
⎞⎜⎜⎝
⎛−
2501.058.24975.1
2501.058.24975.1 µ
1.4923 ≤ µ ≤ 1.5027
Applied Statistics and Probability for Engineers, 5th edition March 15, 2010
9-16
The confidence interval constructed contains the value 1.5. Therefore, there is not strong evidence that true mean hole diameter differs from 1.5 in. using a 99% level of confidence. Because a two-sided 99% confidence interval is equivalent to a two-sided hypothesis test at α = 0.01, the conclusions necessarily must be consistent.
9-47 a) 1) The parameter of interest is the true average battery life, µ. 2) H0 : µ = 4 3) H1 : µ > 4
4)
5) Reject H0 if z0 > zα where α = 0.05 and z0.05 = 1.65 6) 05.4=x , σ = 0.2
77.150/2.0405.4
0 =−
=z
7) Because 1.77>1.65 reject the null hypothesis. There is sufficient evidence to conclude that the true average battery life exceeds 4 hours at α = 0.05.
b) P-value=1- )( 0ZΦ =1- )77.1(Φ ≅ 0.04
c) ⎟⎟⎠
⎞⎜⎜⎝
⎛ −−Φ=
2.050)45.4(
05.0zβ = Φ(1.65 – 17.68) = Φ(-16.03) = 0
Power = 1-β = 1-0 = 1
d) n =( ) ( )
,38.1)5.0(
)2.0()29.165.1()45.4( 2
22
2
221.005.0
2
22
=+
=−
+=
+ σδ
σβα zzzz
n ≅ 2
e) µσ
≤⎟⎠
⎞⎜⎝
⎛−
nzx 05.0
µ
µ
≤
≤⎟⎠
⎞⎜⎝
⎛−
003.4502.065.105.4
Because the lower limit of the CI is just slightly above 4, we conclude that average life is greater than 4 hours at α=0.05.
Section 9-3 9-48 a) α = 0.01, n=20, the critical values are 861.2±
b) α = 0.05, n=12, the critical values are 201.2± c) α = 0.1, n=15, the critical values are 761.1±
9-49 a) α = 0.01, n = 20, the critical value = 2.539 b) α = 0.05, n = 12, the critical value = 1.796 c) α = 0.1, n = 15, the critical value = 1.345
9-50 a) α = 0.01, n = 20, the critical value = -2.539 b) α = 0.05, n = 12, the critical value = -1.796 c) α = 0.1, n = 15, the critical value = -1.345
9-51 a) 05.0*2025.0*2 ≤≤ p then 1.005.0 ≤≤ p
Applied Statistics and Probability for Engineers, 5th edition March 15, 2010
9-17
b) 05.0*2025.0*2 ≤≤ p then 1.005.0 ≤≤ p
c) 4.0*225.0*2 ≤≤ p then 8.05.0 ≤≤ p
9-52 a) 05.0025.0 ≤≤ p
b) 025.0105.01 −≤≤− p then 975.095.0 ≤≤ p
c) 4.025.0 ≤≤ p 9-53 a) 025.0105.01 −≤≤− p then 975.095.0 ≤≤ p
b) 05.0025.0 ≤≤ p
c) 25.014.01 −≤≤− p then 75.06.0 ≤≤ p
9-54 a) SE Mean 1603.020717.0
===NS
6012.820/717.091379.92
0 =−
=t
6012.80 =t with df = 20 – 1 = 19, so the P-value < 0.0005. Because the P-value < α = 0.05 we reject the null
hypothesis that µ = 91at the 0.05 level of significance.
95% lower CI of the mean is µ≤−nStx 19,05.0
µ≤−20717.0)729.1(379.92
µ≤1018.92
b) A one-sided test because the alternative hypothesis is mu > 91.
c) If the alternative hypothesis is changed to mu > 90, then 8385.1420/717.090379.92
0 =−
=t
8385.140 =t with df = 20 – 1 = 19, so the P-value < 0.0005. The P-value < α = 0.05 and we reject the null hypothesis at the 0.05 level of significance.
9-55 a) degrees of freedom = n - 1 = 10 - 1 = 9
b) SE Mean 296.010
===s
Ns
, then s = 0.9360.
905.1296.0
12564.120 =
−=t
905.10 =t with df = 10 – 1 = 9. The P-value falls between two values: 1.833 (for α = 0.05) and 2.262 (for α =
0.025), so 0.05 = 2(0.025) < P-value < 2(0.05) = 0.1. The P-value > α = 0.05 so we fail to reject the null hypothesis at the 0.05 level of significance.
c) A two-sided test because the alternative hypothesis is mu not = 12.
d) 95% two-sided CI
⎟⎠
⎞⎜⎝
⎛+≤≤⎟
⎠
⎞⎜⎝
⎛−
nstx
nstx 9,025.09,025.0 µ
Applied Statistics and Probability for Engineers, 5th edition March 15, 2010
9-18
2335.138945.11109360.0262.2564.12
109360.0262.2564.12
≤≤
⎟⎠
⎞⎜⎝
⎛+≤≤⎟
⎠
⎞⎜⎝
⎛−
µ
µ
e) Suppose that the alternative hypothesis is changed to µ > 12. Because 833.1905.1 9,05.00 =>= tt we reject the
null hypothesis at the 0.05 level of significance. f) Reject the null hypothesis that the µ = 11.5 versus the alternative hypothesis (µ ≠ 11.5) at the 0.05 level of significance because the µ = 11.5 is not include in the 95% two-sided CI on the mean.
9-56 a) degree of freedom = N – 1 = 16 – 1 = 15
b) SE Mean 4458.016783.1
===NS
8581.216/783.134274.35
0 =−
=t
c) We can reject the null hypothesis if P-value < α. Thus, we can reject the null hypothesis at significance levels greater than 0.012. d) If the alternative hypothesis is changed to the one-sided alternative mu > 34, the P-value is one-half the value of 0.012. e) If the null hypothesis is changed to mu = 34.5 versus the alternative hypothesis (mu ≠ 34.5),
7364.116/783.15.34274.35
0 =−
=t
and 131.215,025.0 =t .
Because 15,025.00 7364.1 tt <= we fail to reject the null hypothesis at the 0.05 level of significance.
9-57 a) 1) The parameter of interest is the true mean of body weight, µ. 2) H0: µ = 300 3) H1: µ ≠ 300
4) ns
xt/0µ−
=
5) Reject H0 if |t0| > tα/2,n-1 where α = 0.05 and tα/2,n-1 = 2.056 for n = 27 6) 325.496=x , s = 198.786, n = 27
6665.027/786.198300496.325
0 =−
=t
7) Because 0.6665 < 2.056 we fail to reject the null hypothesis. There is not sufficient evidence to conclude that the true mean body weight differs from 300 at α = 0.05. We have 2*0.25 < P-value < 2*0.4. That is, 0.5 < P-value < 0.8
b) We can reject the null hypothesis if P-value < α. The P-value = 2*0.2554 = 0.5108. Therefore, the smallest level of significance at which we can reject the null hypothesis is approximately 0.51.
c) 95% two sided confidence interval
⎟⎠
⎞⎜⎝
⎛+≤≤⎟
⎠
⎞⎜⎝
⎛−
nstx
nstx 26,025.026,025.0 µ
Applied Statistics and Probability for Engineers, 5th edition March 15, 2010
9-19
1511.4048409.24627786.198056.2496.325
27786.198056.2496.325
≤≤
⎟⎠
⎞⎜⎝
⎛+≤≤⎟
⎠
⎞⎜⎝
⎛−
µ
µ
We fail to reject the null hypothesis because the hypothesized value of 300 is included within the confidence interval. 9-58 a. 1) The parameter of interest is the true mean interior temperature life, µ. 2) H0 : µ = 22.5 3) H1 : µ ≠ 22.5
4) ns
xt/0µ−
=
5) Reject H0 if |t0| > tα/2,n-1 where α = 0.05 and tα/2,n-1 = 2.776 for n = 5 6) 22.496=x , s = 0.378, n = 5
00237.05/378.05.22496.22
0 −=−
=t
7) Because –0.00237 >- 2.776 we cannot reject the null hypothesis. There is not sufficient evidence to conclude that the true mean interior temperature is not equal to 22.5 °C at α = 0.05. Also, 2*0.4 < P-value < 2* 0.5. That is, 0.8 < P-value < 1.0
b) The points on the normal probability plot fall along the line. Therefore, the normality assumption is reasonable.
c) d = 66.0378.0
|5.2275.22||| 0 =−
=−
=σµµ
σδ
Using the OC curve, Chart VII e) for α = 0.05, d = 0.66, and n = 5, we obtain β ≅ 0.8 and power of 1−0.8 = 0.2.
d) d = 66.0378.0
|5.2275.22||| 0 =−
=−
=σµµ
σδ
Using the OC curve, Chart VII e) for α = 0.05, d = 0.66, and β ≅ 0.1 (Power=0.9), n = 40 e) 95% two sided confidence interval
21.5 22.5 23.5
1
5
10
20304050607080
90
95
99
Data
Per
cent
Normal Probability Plot for tempML Estimates - 95% CI
Mean
StDev
22.496
0.338384
ML Estimates
Applied Statistics and Probability for Engineers, 5th edition March 15, 2010
9-20
⎟⎟⎠
⎞⎜⎜⎝
⎛+≤≤⎟⎟
⎠
⎞⎜⎜⎝
⎛−
nstx
nstx 4,025.04,025.0 µ
965.22027.225378.0776.2496.22
5378.0776.2496.22
≤≤
⎟⎟⎠
⎞⎜⎜⎝
⎛+≤≤⎟⎟
⎠
⎞⎜⎜⎝
⎛−
µ
µ
We cannot conclude that the mean interior temperature differs from 22.5 because the value is included in the confidence interval.
9-59 a. 1) The parameter of interest is the true mean female body temperature, µ. 2) H0 : µ = 98.6 3) H1 : µ ≠ 98.6
4) ns
xt/0µ−
=
5) Reject H0 if |t0| > tα/2,n-1 where α = 0.05 and tα/2,n-1 = 2.064 for n = 25 6) 264.98=x , s = 0.4821, n = 25
48.325/4821.06.98264.98
0 −=−
=t
7) Because 3.48 > 2.064 reject the null hypothesis. There is sufficient evidence to conclude that the true mean female body temperature is not equal to 98.6 °F at α = 0.05.
P-value = 2* 0.001 = 0.002
b) Data appear to be normally distributed.
c) d = 24.14821.0
|6.9898||| 0 =−
=−
=σµµ
σδ
Using the OC curve, Chart VII e) for α = 0.05, d = 1.24, and n = 25, obtain β ≅ 0 and power of 1 − 0 ≅ 1.
d) d = 83.04821.0
|6.982.98||| 0 =−
=−
=σµµ
σδ
Using the OC curve, Chart VII e) for α = 0.05, d = 0.83, and β ≅ 0.1 (Power=0.9), n =20 e) 95% two sided confidence interval
97 98 99
1
5
10
20304050607080
90
95
99
Data
Perc
ent
Normal Probability Plot for 9-31ML Estimates - 95% CI
Applied Statistics and Probability for Engineers, 5th edition March 15, 2010
9-21
⎟⎠
⎞⎜⎝
⎛+≤≤⎟
⎠
⎞⎜⎝
⎛−
nstx
nstx 24,025.024,025.0 µ
463.98065.98254821.0064.2264.98
254821.0064.2264.98
≤≤
⎟⎠
⎞⎜⎝
⎛+≤≤⎟
⎠
⎞⎜⎝
⎛−
µ
µ
Conclude that the mean female body temperature differs from 98.6 because the value is not included inside the confidence interval.
9-60 a) 1) The parameter of interest is the true mean rainfall, µ. 2) H0 : µ = 25 3) H1 : µ > 25
4) t0 = ns
x/µ−
5) Reject H0 if t0 > tα,n-1 where α = 0.01 and t0.01,19 = 2.539 for n = 20 6) = 26.04 s = 4.78 n = 20
t0 = 97.020/78.42504.26
=−
7) Because 0.97 < 2.539 fail to reject the null hypothesis. There is insufficient evidence to conclude that the true mean rainfall is greater than 25 acre-feet at α = 0.01. The 0.10 < P-value < 0.25.
b) The data on the normal probability plot fall along the straight line. Therefore, the normality assumption is reasonable.
c) d = 42.078.4
|2527||| 0 =−
=−
=σµµ
σδ
Using the OC curve, Chart VII h) for α = 0.01, d = 0.42, and n = 20, obtain β ≅ 0.7 and power of 1 − 0.7 = 0.3.
d) d = 52.078.4
|255.27||| 0 =−
=−
=σµµ
σδ
Using the OC curve, Chart VII h) for α = 0.05, d = 0.42, and β ≅ 0.1 (Power=0.9), n = 75 e) 99% lower confidence bound on the mean diameter
0.01,19sx tn
µ⎛ ⎞
− ≤⎜ ⎟⎝ ⎠
4.7826.04 2.53920
23.326
µ
µ
⎛ ⎞− ≤⎜ ⎟
⎝ ⎠≤
Because the lower limit of the CI is less than 25 there is insufficient evidence to conclude that the true mean rainfall is greater than 25 acre-feet at α = 0.01.
9-61 a)
1) The parameter of interest is the true mean sodium content, µ. 2) H0 : µ = 130 3) H1 : µ ≠ 130
4) ns
xt/0µ−
=
Applied Statistics and Probability for Engineers, 5th edition March 15, 2010
9-22
5) Reject H0 if |t0| > tα/2,n-1 where α = 0.05 and tα/2,n-1 = 2.093 for n = 20 6) 747.129=x , s = 0.876 n = 20
291.120/876.0130747.129
0 −=−
=t
7) Because 1.291< 2.093 we fail to reject the null hypothesis. There is not sufficient evidence that the true mean sodium content is different from 130mg at α = 0.05.
From the t table (Table V) the t0 value is between the values of 0.1 and 0.25 with 19 degrees of freedom. Therefore, 2(0.1) < P-value < 2(0.25) and 0.2 < P-value < 0.5.
b) The assumption of normality appears to be reasonable.
SodiumContent
Per
cent
133132131130129128127
99
95
90
80
7060504030
20
10
5
1
Mean
0.710
129.7StDev 0.8764N 20AD 0.250P-Value
Probability Plot of SodiumContentNormal - 95% CI
c) d = 571.0876.0
|1305.130||| 0 =−
=−
=σµµ
σδ
Using the OC curve, Chart VII e) for α = 0.05, d = 0.57, and n = 20, we obtain β ≅ 0.3 and the power of 1 − 0.30 = 0.70
d) d = 114.0876.0
|1301.130||| 0 =−
=−
=σµµ
σδ
Using the OC curve, Chart VII e) for α = 0.05, d = 0.11, and β ≅ 0.25 (Power=0.75), the sample sizes do not extend to the point d = 0.114 and β = 0.25. We can conclude that n > 100
e) 95% two sided confidence interval
⎟⎟⎠
⎞⎜⎜⎝
⎛+≤≤⎟⎟
⎠
⎞⎜⎜⎝
⎛−
nstx
nstx 29,025.029,025.0 µ
157.130337.12920876.0093.2747.129
20876.0093.2747.129
≤≤
⎟⎠
⎞⎜⎝
⎛+≤≤⎟
⎠
⎞⎜⎝
⎛−
µ
µ
There is no evidence that the mean differs from 130 because that value is inside the confidence interval. The result is the same as part (a).
9-62
Applied Statistics and Probability for Engineers, 5th edition March 15, 2010
9-23
a) In order to use t statistics in hypothesis testing, we need to assume that the underlying distribution is normal. 1) The parameter of interest is the true mean coefficient of restitution, µ. 2) H0 : µ = 0.635 3) H1 : µ > 0.635
4) t0 = ns
x/µ−
5) Reject H0 if t0 > tα,n-1 where α = 0.05 and t0.05,39 = 1.685 for n = 40 6) = 0.624 s = 0.013 n = 40
t0 = 35.540/013.0635.0624.0
−=−
7) Because –5.25 < 1.685 fail to reject the null hypothesis. There is not sufficient evidence to conclude that the true mean coefficient of restitution is greater than 0.635 at α = 0.05. The area to right of -5.35 under the t distribution is greater than 0.9995 from table V. Minitab generates a P-value = 1.
b) From the normal probability plot, the normality assumption seems reasonable:
Baseball Coeff of Restitution
Perc
ent
0.660.650.640.630.620.610.600.59
99
95
90
80
70
60504030
20
10
5
1
Probability Plot of Baseball Coeff of RestitutionNormal
c) d = 38.0013.0
|635.064.0||| 0 =−
=−
=σµµ
σδ
Using the OC curve, Chart VII g) for α = 0.05, d = 0.38, and n = 40, obtain β ≅ 0.25 and power of 1−0.25 = 0.75.
d) d = 23.0013.0
|635.0638.0||| 0 =−
=−
=σµµ
σδ
Using the OC curve, Chart VII g) for α = 0.05, d = 0.23, and β ≅ 0.25 (Power=0.75), n = 40
e) Lower confidence bound is 6205.01, =⎟⎠
⎞⎜⎝
⎛− − n
stx nα
Because 0.635 > 0.6205 we fail to reject the null hypothesis.
9-63 a) In order to use t statistics in hypothesis testing, we need to assume that the underlying distribution is normal. 1) The parameter of interest is the true mean oxygen concentration, µ. 2) H0 : µ = 4 3) H1 : µ ≠ 4
4) t0 = ns
x/µ−
Applied Statistics and Probability for Engineers, 5th edition March 15, 2010
9-24
5) Reject H0 if |t0 |>tα/2, n-1 where α = 0.01 and t0.005, 19 = 2.861 for n = 20 6) x = 3.265, s = 2.127, n = 20
t0 = 55.120/127.24265.3
−=−
7) Because -2.861<-1.55 fail to reject the null hypothesis. There is insufficient evidence to conclude that the true mean oxygen differs from 4 at α = 0.01. P-Value: 2*0.05<P-value<2*0.10 therefore 0.10< P-value<0.20
b) From the normal probability plot, the normality assumption seems reasonable:
O2 concentration
Perc
ent
7.55.02.50.0
99
95
90
80
70
60504030
20
10
5
1
Probability Plot of O2 concentrationNormal
c) d = 47.0127.2|43||| 0 =
−=
−=
σµµ
σδ
Using the OC curve, Chart VII f) for α = 0.01, d = 0.47, and n = 20, we get β ≅ 0.70 and power of 1−0.70 = 0.30.
f) d = 71.0127.2
|45.2||| 0 =−
=−
=σµµ
σδ
Using the OC curve, Chart VII f) for α = 0.01, d = 0.71, and β ≅ 0.10 (Power=0.90), 40=n .
g) The 95% confidence interval is:
⎟⎠
⎞⎜⎝
⎛+≤≤⎟
⎠
⎞⎜⎝
⎛− −− n
stxnstx nn 1,2/1,2/ αα µ = 62.49.1 ≤≤ µ
Because 4 is within the confidence interval, we fail to reject the null hypothesis.
9-64 a) 1) The parameter of interest is the true mean sodium content, µ.
2) H0 : µ = 300 3) H1 : µ > 300
4) ns
xt/0µ−
=
5) Reject H0 if t0 > tα,n-1 where α = 0.05 and tα,n-1 = 1.943 for n = 7 6) 315=x , s = 16 n=7
48.27/16300315
0 =−
=t
Applied Statistics and Probability for Engineers, 5th edition March 15, 2010
9-25
7) Because 2.48>1.943 reject the null hypothesis and conclude that there is sufficient evidence that the leg strength exceeds 300 watts at α = 0.05. The P-value is between .01 and .025
b) d = 3125.016
|300305||| 0 =−
=−
=σµµ
σδ
Using the OC curve, Chart VII g) for α = 0.05, d = 0.3125, and n = 7, β ≅ 0.9 and power = 1−0.9 = 0.1.
c) If 1 - β > 0.9 then β < 0.1 and n is approximately 100
d) Lower confidence bound is 2.3031, =⎟⎠
⎞⎜⎝
⎛− − n
stx nα < µ
Because 300 is not include in the interval, reject the null hypothesis
9-65 a) 1) The parameter of interest is the true mean tire life, µ.
2) H0 : µ = 60000 3) H1 : µ > 60000
4) t0 = ns
x/µ−
5) Reject H0 if t0 > tα,n-1 where α = 0.05 and 753.115,05.0 =t for n = 16
6) 94.36457.139,6016 === sxn
t0 = 15.016/94.3645
600007.60139=
−
7) Because 0.15 < 1.753 fail to reject the null hypothesis. There is insufficient evidence to conclude that the true mean tire life is greater than 60,000 kilometers at α = 0.05. The P-value > 0.40.
b) d = 27.094.3645
|6000061000||| 0 =−
=−
=σµµ
σδ
Using the OC curve, Chart VII g) for α = 0.05, d = 0.27, and β ≅ 0.1 (Power=0.9), n = 4. Yes, the sample size of 16 was sufficient.
9-66 In order to use t statistics in hypothesis testing, we need to assume that the underlying distribution is normal. 1) The parameter of interest is the true mean impact strength, µ. 2) H0 : µ = 1.0 3) H1 : µ > 1.0
4) t0 = ns
x/µ−
5) Reject H0 if t0 > tα,n-1 where α = 0.05 and t0.05,19 = 1.729 for n = 20 6) = 1.25 s = 0.25 n = 20
t0 = 47.420/25.00.125.1=
−
7) Because 4.47 > 1.729 reject the null hypothesis. There is sufficient evidence to conclude that the true mean impact strength is greater than 1.0 ft-lb/in at α = 0.05. The P-value < 0.0005
9-67 In order to use a t statistic in hypothesis testing, we need to assume that the underlying distribution is normal. 1) The parameter of interest is the true mean current, µ. 2) H0 : µ = 300 3) H1 : µ > 300
Applied Statistics and Probability for Engineers, 5th edition March 15, 2010
9-26
4) t0 = ns
x/µ−
5) Reject H0 if t0 > tα,n-1 where α = 0.05 and 833.19,05.0 =t for n = 10
6) 7.152.31710 === sxn
t0 = 46.310/7.153002.317
=−
7) Because 3.46 > 1.833 reject the null hypothesis. There is sufficient evidence to indicate that the true mean current is greater than 300 microamps at α = 0.05. The 0.0025 <P-value < 0.005
9-68 a)
1) The parameter of interest is the true mean height of female engineering students, µ. 2) H0 : µ = 65 3) H1 : µ > 65
4) t0 = ns
x/µ−
5) Reject H0 if t0 > tα,n-1 where α = 0.05 and t0.05,36 =1.68 for n = 37 6) 65.811 =x inches 2.106=s inches n = 37
t0 = 34.237/11.265811.65
=−
7) Because 2.34 > 1.68 reject the null hypothesis. There is sufficient evidence to conclude that the true mean height of female engineering students is greater than 65 at α = 0.05. P-value: 0.01<P-value<0.025.
b) From the normal probability plot, the normality assumption seems reasonable:
Female heights
Perc
ent
72706866646260
99
95
90
80
70
60504030
20
10
5
1
Probability Plot of Female heightsNormal
c) 42.111.26562
=−
=d , n=37 so, from the OC Chart VII g) for α = 0.05, we find that β≅0.
Therefore, the power ≅ 1.
Applied Statistics and Probability for Engineers, 5th edition March 15, 2010
9-27
d) 47.011.26564
=−
=d so, from the OC Chart VII g) for α = 0.05, and β≅0.2 (Power=0.8).
30* =n . 9-69 a) In order to use t statistics in hypothesis testing, we need to assume that the underlying distribution is normal. 1) The parameter of interest is the true mean distance, µ. 2) H0 : µ = 280 3) H1 : µ > 280
4) t0 = ns
x/µ−
5) Reject H0 if t0 > tα,n-1 where α = 0.05 and t0.05,99 =1.6604 for n = 100 6) = 260.3 s = 13.41 n = 100
t0 = 69.14100/41.132803.260
−=−
7) Because –14.69 < 1.6604 fail to reject the null hypothesis. There is insufficient evidence to indicate that the true mean distance is greater than 280 at α = 0.05. From Table V the t0 value in absolute value is greater than the value corresponding to 0.0005. Therefore, the P-value > 0.9995. b) From the normal probability plot, the normality assumption seems reasonable:
Distance for golf balls
Perc
ent
310300290280270260250240230220
99.9
99
9590
80706050403020
10
5
1
0.1
Probability Plot of Distance for golf ballsNormal
c) d = 75.041.13
|280290||| 0 =−
=−
=σµµ
σδ
Using the OC curve, Chart VII g) for α = 0.05, d = 0.75, and n = 100, obtain β ≅ 0 and power ≈ 1
d) d = 75.041.13
|280290||| 0 =−
=−
=σµµ
σδ
Using the OC curve, Chart VII g) for α = 0.05, d = 0.75, and β ≅ 0.20 (Power = 0.80), n =15 9-70 a) In order to use t statistics in hypothesis testing, we need to assume that the underlying distribution is normal.
Applied Statistics and Probability for Engineers, 5th edition March 15, 2010
9-28
1) The parameter of interest is the true mean concentration of suspended solids, µ. 2) H0 : µ = 55 3) H1 : µ ≠ 55
4) t0 = ns
x/µ−
5) Reject H0 if |t0 | > tα/2,n-1 where α = 0.05 and t0.025,59 =2.000 for n = 60 6) = 59.87 s = 12.50 n = 60
t0 = 018.360/50.125587.59
=−
7) Because 3.018 > 2.000, reject the null hypothesis. There is sufficient evidence to conclude that the true mean concentration of suspended solids is not equal to 55 at α = 0.05.
From Table V the t0 value is between the values of 0.001 and 0.0025 with 59 degrees of freedom. Therefore, 2*0.001 < P-value < 2* 0.0025 and 0.002 < P-value < 0.005. Minitab gives a P-value of 0.0038.
b) From the normal probability plot, the normality assumption seems reasonable:
Concentration of solids
Perc
ent
1009080706050403020
99.9
99
9590
80706050403020
10
5
1
0.1
Probability Plot of Concentration of solidsNormal
d) 4.050.125550
=−
=d , n = 60 so, from the OC Chart VII e) for α = 0.05, d= 0.4 and n=60 obtain β≅0.2.
Therefore, the power = 1 - 0.2 = 0.8. e) From the same OC chart, and for the specified power, we would need approximately 75 observations.
4.050.125550
=−
=d
Using the OC Chart VII e) for α = 0.05, d = 0.4, and β ≅ 0.10 so that the power = 0.90, n = 75
Applied Statistics and Probability for Engineers, 5th edition March 15, 2010
9-29
Section 9-4 9-71 a) α = 0.01, n = 20, from table V we find the following critical values 6.84 and 38.58 b) α = 0.05, n = 12, from table V we find the following critical values 3.82 and 21.92 c) α = 0.10, n = 15, from table V we find the following critical values 6.57 and 23.68
9-72 a) α = 0.01, n = 20, from Table V we find =−2
1,nαχ 36.19
b) α = 0.05, n = 12, from Table V we find =−2
1,nαχ 19.68
c) α = 0.10, n = 15, from Table V we find =−2
1,nαχ 21.06
9-73 a) α = 0.01, n = 20, from Table V we find =−−2
1,1 nαχ 7.63
b) α = 0.05, n = 12, from Table V we find =−−2
1,1 nαχ 4.57
c) α = 0.10, n = 15, from Table V we find =−−2
1,1 nαχ 7.79
9-74 a) 2(0.1) < P-value < 2(0.5), then 0.2 < P-value < 1 b) 2(0.1) < P-value < 2(0.5), then 0.2 < P-value < 1 c) 2(0.05) < P-value < 2(0.1), then 0.1 < P-value < 0.2 9-75 a) 0.1 < 1-P < 0.5 then 0.5 < P-value < 0.9 b) 0.1 < 1-P< 0.5 then 0.5 < P-value < 0.9 c) 0.99 <1-P <0.995 then 0.005 < P-value < 0.01 9-76 a) 0.1 < P-value < 0.5 b) 0.1 < P-value < 0.5 c) 0.99 < P-value < 0.995 9-77
a) In order to use the χ2 statistic in hypothesis testing and confidence interval construction, we need to assume that the underlying distribution is normal. 1) The parameter of interest is the true standard deviation of performance time σ. However, the answer can be found by performing a hypothesis test on σ2.
2) H0 : σ2 = 0.752 3) H1 : σ2 > 0.752
4) =
5) Reject H0 if 2
1,20 −> nαχχ where α = 0.05 and 30.262
16,05.0 =χ
6) n = 17, s = 0.09
= 23.075.
)09.0(16)1(2
2
2
2
==−
σsn
7) Because 0.23 < 26.30 fail to reject H0. There is insufficient evidence to conclude that the true variance of performance time content exceeds 0.752 at α = 0.05.
Because =0.23 the P-value > 0.995
b) The 95% one sided confidence interval given below includes the value 0.75. Therefore, we are not be able to conclude that the standard deviation is greater than 0.75.
σ
σ
≤
≤
07.03.26)09(.16 22
Applied Statistics and Probability for Engineers, 5th edition March 15, 2010
9-30
9-78 a) In order to use the χ2 statistic in hypothesis testing and confidence interval construction, we need to assume that the underlying distribution is normal.
1) The parameter of interest is the true measurement standard deviation σ. However, the answer can be found by performing a hypothesis test on σ2.
2) H0 : σ2 = .012 3) H1 : σ2 ≠ .012
4) =
5) Reject H0 if where α = 0.05 and 63.5214,975.0 =χ or where α = 0.05 and
12.26214,025.0 =χ for n = 15
6) n = 15, s = 0.0083
= 6446.901.
)0083(.14)1(2
2
2
2
==−σsn
7) Because 5.63 < 9.64 < 26.12 fail to reject H0 0.1 < P-value/2 < 0.5. Therefore, 0.2 < P-value < 1
b) The 95% confidence interval includes the value 0.01. Therefore, there is not enough evidence to reject the null hypothesis.
013.000607.063.5)0083(.14
12.26)0083(.14
2
22
2
≤≤
≤≤
σ
σ
9-79
a) In order to use the χ2 statistic in hypothesis testing and confidence interval construction, we need to assume that the underlying distribution is normal.
1) The parameter of interest is the true standard deviation of titanium percentage, σ. However, the answer can be found by performing a hypothesis test on σ2.
2) H0 : σ2 = (0.25)2 3) H1 : σ2 ≠ (0.25)2
4) =
5) Reject H0 if where α = 0.05 and 32.36 or where α = 0.05 and
71.42 for n = 51 6) n = 51, s = 0.37
=
7) Because 109.52 > 71.42 we reject H0. The true standard deviation of titanium percentage is significantly different from 0.25 at α = 0.01. P-value/2 < 0.005, then P-value < 0.01
b) 95% confidence interval for σ:
First find the confidence interval for σ2 : For α = 0.05 and n = 51, 71.42 and 32.36
36.32)37.0(50
42.71)37.0(50 2
22
≤≤σ
0.096 ≤ σ2 ≤ 0.2115 Taking the square root of the endpoints of this interval we obtain, 0.31 < σ < 0.46
Applied Statistics and Probability for Engineers, 5th edition March 15, 2010
9-31
Because 0.25 falls below the lower confidence bound we would conclude that the population standard deviation is not equal to 0.25.
9-80
a) In order to use the χ2 statistic in hypothesis testing and confidence interval construction, we need to assume that the underlying distribution is normal.
1) The parameter of interest is the true standard deviation of Izod impact strength, σ. However, the answer can be found by performing a hypothesis test on σ2.
2) H0 : σ2 = (0.10)2 3) H1 : σ2 ≠ (0.10)2
4) =
5) Reject H0 if where α = 0.01 and 84.6219,995.0 =χ 27 or where α = 0.01 and
58.38219,005.0 =χ for n = 20
6) n = 20, s = 0.25
= 75.118)10.0()25.0(19)1(2
2
2
2
==−
σsn
7) Because 118.75 > 38.58 reject H0. There is sufficient evidence to indicate the true standard deviation of Izod impact strength is significantly different from 0.10 at α = 0.01.
b) P-value < 0.005 c) 99% confidence interval for σ. First find the confidence interval for σ2 :
For α = 0.01 and n = 20, 84.6219,995.0 =χ and 58.382
19,005.0 =χ
417.0175.01736.003078.0
84.6)25.0(19
58.38)25.0(19
2
22
2
<<
≤≤
≤≤
σ
σ
σ
Because 0.01 falls below the lower confidence bound we would conclude that the population standard deviation is not equal to 0.01.
9-81
a) In order to use the χ2 statistic in hypothesis testing and confidence interval construction, we need to assume that the underlying distribution is normal.
1) The parameter of interest is the standard deviation of tire life, σ. However, the answer can be found by performing a hypothesis test on σ2.
2) H0 : σ2 = 40002 3) H1 : σ2 <40002
4) = 2
2)1(σsn −
5) Reject H0 if 2
1,120 −−< nαχχ where α = 0.05 and =2
15,95.0χ 7.26 for n = 16
6) n = 16, s2 = (3645.94)2
= 46.124000
)94.3645(15)1(2
2
2
2
==−σsn
7) Because 12.46 > 7.26 fail to reject H0. There is not sufficient evidence to conclude the true standard deviation of tire life is less than 4000 km at α = 0.05.
Applied Statistics and Probability for Engineers, 5th edition March 15, 2010
9-32
P-value = P(χ2 <12.46) for 15 degrees of freedom. Thus, 0.5 < 1-P-value < 0.9 and 0.1 < P-value < 0.5
b) The 95% one sided confidence interval below includes the value 4000. Therefore, we are not able to conclude that the variance is less than 40002.
5240
2746462526.7
)94.3645(15 22
≤
=≤
σ
σ
9-82
a) In order to use the χ2 statistic in hypothesis testing and confidence interval construction, we need to assume that the underlying distribution is normal.
1) The parameter of interest is the true standard deviation of the diameter,σ. However, the answer can be found by performing a hypothesis test on σ2.
2) H0 : σ2 = 0.0001 3) H1 : σ2 > 0.0001
4) =
5) Reject H0 if where α = 0.01 and = 29.14 for n = 15 6) n = 15, s2 = 0.008
=
7) Because 8.96 < 29.14 fail to reject H0. There is insufficient evidence to conclude that the true standard deviation of the diameter exceeds 0.0001 at α = 0.01.
P-value = P(χ2 > 8.96) for 14 degrees of freedom: 0.5 < P-value < 0.9
b) Using the chart in the Appendix, with 0.015 1.50.01
λ = = and n = 15 we find β = 0.50.
c) 25.101.00125.0
0
===σσ
λ power = 0.8, β = 0.2, using Chart VII k) the required sample size is 50
9-83
a) In order to use the χ2 statistic in hypothesis testing and confidence interval construction, we need to assume that the underlying distribution is normal.
1) The parameter of interest is the true variance of sugar content, σ2. The answer can be found by performing a hypothesis test on σ2.
2) H0 : σ2 = 18 3) H1 : σ2 ≠ 18
4) =
5) Reject H0 if where α = 0.05 and 70.229,975.0 =χ or where α = 0.05 and
02.1929,025.0 =χ for n = 10
6) n = 10, s = 4.8
= 52.1118)8.4(9)1( 2
2
2
==−
σsn
7) Because 11.52 < 19.02 fail to reject H0. There is insufficient evidence to conclude that the true variance of sugar content is significantly different from 18 at α = 0.01. P-value: The is between 0.10 and 0.50. Therefore, 0.2 < P-value < 1
b) Using the chart in the Appendix, with 2λ = and n = 10 we find β = 0.45.
Applied Statistics and Probability for Engineers, 5th edition March 15, 2010
9-33
c) Using the chart in the Appendix, with 49.11840
==λ and β = 0.10, n = 30.
Applied Statistics and Probability for Engineers, 5th edition March 15, 2010
9-34
Section 9-5 9-84 a) A two-sided test because the alternative hypothesis is p not = 0.4
b) sample p = 3564.027598
==NX
( )4771.1
)6.0)(4.0(275)4.0(27598
1 00
00 −=
−=
−
−=
pnpnpxz
P-value = 2(1 – Φ(1.4771)) = 2(1 – 0.9302) = 0.1396 c) The normal approximation is appropriate because np > 5 and n(1 - p) > 5. 9-85 a) A one-sided test because the alternative hypothesis is p < 0.6
b) The test is based on the normal approximation. It is appropriate because np > 5and n(1 - p) > 5.
c) sample p = 574.0500287
==NX
( )1867.1
)4.0)(6.0(500)6.0(500287
1 00
00 −=
−=
−
−=
pnpnpxz
P-value = Φ(-1.1867) = 0.1177 The 95% upper confidence interval is:
6105.0500
)426.0(574.065.1574.0
)ˆ1(ˆˆ
≤
+≤
−+≤
p
p
nppzpp α
d) P-value = 2[1 - Φ(1.1867)] = 2(1 - 0.8823) = 0.2354
9-86 a)
1) The parameter of interest is the true fraction of satisfied customers. 2) H0 : p = 0.9
3) H1 : p ≠ 0.9
4) ( )00
00 1 pnp
npxz
−
−= or
( )npppp
z00
00 1
ˆ−
−= ; Either approach will yield the
same conclusion 5) Reject H0 if z0 < − zα/2 where α = 0.05 and −zα/2 = −z0.025 = −1.96 or z0 > zα/2 where α = 0.05 and zα/2 =
z0.025 = 1.96
6) x = 850 n = 1000 85.01000850ˆ ==p
( )
27.5)1.0)(9.0(1000)9.0(1000850
1 00
00 −=
−=
−
−=
pnpnpxz
7) Because -5.27<-1.96 reject the null hypothesis and conclude the true fraction of satisfied customers is significantly different from 0.9 at α = 0.05.
Applied Statistics and Probability for Engineers, 5th edition March 15, 2010
9-35
The P-value: 2(1-Φ(5.27)) ≤ 2(1-1) ≈ 0 b) The 95% confidence interval for the fraction of surveyed customers is:
87.0827.01000
)15.0(85.096.185.1000
)15.0(85.096.185.
)ˆ1(ˆˆ)ˆ1(ˆˆ 2/2/
≤≤
+≤≤−
−+≤≤
−−
p
p
nppzpp
nppzp αα
Because 0.9 is not included in the confidence interval, we reject the null hypothesis at α = 0.05.
9-87 a) 1) The parameter of interest is the true fraction of rejected parts
2) H0 : p = 0.03 3) H1 : p < 0.03
4)( )00
00 1 pnp
npxz−
−= or
( )nppppz
00
00 1
ˆ−
−= ; Either approach will yield the same conclusion
5) Reject H0 if z0 < − zα where α = 0.05 and −zα = −z0.05 = −1.65
6) x = 10 n = 500 02.050010ˆ ==p
( )
31.1)97.0)(03.0(500)03.0(50010
1 00
00 −=
−=
−
−=
pnpnpxz
7) Because −1.31 > −1.65 fail to reject the null hypothesis. There is not enough evidence to conclude that the true fraction of rejected parts is less than 0.03 at α = 0.05.
P-value = Φ(-1.31) = 0.095 b)
The upper one-sided 95% confidence interval for the fraction of rejected parts is:
0303.0500
)98.0(02.065.102.
)ˆ1(ˆˆ
≤
+≤
−−≤
p
p
nppzpp α
Because 0.03<0.0303 we fail to reject the null hypothesis
9-88 a) 1) The parameter of interest is the true fraction defective integrated circuits
2) H0 : p = 0.05 3) H1 : p ≠ 0.05
4) ( )00
00 1 pnp
npxz
−
−= or
( )npppp
z00
00 1
ˆ−
−= ; Either approach will yield the same conclusion
5) Reject H0 if z0 < − zα/2 where α = 0.05 and −zα/2 = −z0.025 = −1.96 or z0 > zα/2 where α = 0.05 and zα/2 = z0.025 = 1.96
6) x = 13 n = 300
Applied Statistics and Probability for Engineers, 5th edition March 15, 2010
9-36
( )
53.0)95.0)(05.0(300)05.0(30013
1 00
00 −=
−=
−
−=
pnpnpx
z
7) Because −0.53 > −1.65 fail to reject null hypothesis. The true fraction of defective integrated circuits is not significantly different from 0.05, at α = 0.05.
P-value = 2(1-Φ(0.53)) = 2(1-0.70194) = 0.59612 b) The 95% confidence interval is:
065.002004.0300
)957.0(043.096.1043300
)957.0(043.096.1043.
)ˆ1(ˆˆ)ˆ1(ˆˆ 2/2/
≤≤
+≤≤−
−+≤≤
−−
p
p
nppzpp
nppzp αα
Because the hypothesized value (p = 0.05) is contained in the confidence interval we fail to reject the null hypothesis. 9-89 a)
1) The parameter of interest is the true success rate 2) H0 : p = 0.78 3) H1 : p > 0.78
4) ( )00
00 1 pnp
npxz
−
−= or
( )npppp
z00
00 1
ˆ−
−= ; Either approach will yield the same conclusion
5) Reject H0 if z0 > zα . Since the value for α is not given. We assume α = 0.05 and zα = z0.05 = 1.65
6) x = 289 n = 350 83.0350289ˆ ≅=p
( )
06.2)22.0)(78.0(350)78.0(350289
1 00
00 =
−=
−
−=
pnpnpxz
7) Because 2.06 > 1.65 reject the null hypothesis and conclude the true success rate is significantly greater than 0.78, at α = 0.05. P-value = 1-0.9803 = 0.0197
b) The 95% lower confidence interval:
p
p
pnppzp
≤
≤−
≤−
−
7969.0350
)17.0(83.065.183.
)ˆ1(ˆˆ α
Because the hypothesized value is not in the confidence interval (0.78 < 0.7969), reject the null hypothesis. 9-90 a)
1) The parameter of interest is the true percentage of polished lenses that contain surface defects, p. 2) H0 : p = 0.02 3) H1 : p < 0.02
Applied Statistics and Probability for Engineers, 5th edition March 15, 2010
9-37
4) ( )00
00 1 pnp
npxz−
−= or
( )nppppz
00
00 1
ˆ−
−= ; Either approach will yield the
same conclusion 5) Reject H0 if z0 < − zα where α = 0.05 and −zα = −z0.05 = −1.65
6) x = 6 n = 250 024.02506ˆ ==p
( )
452.0
250)02.01(02.0
02.0024.01ˆ
00
00 =
−
−=
−
−=
nppppz
7) Because 0.452 > −1.65 fail to reject the null hypothesis. There is not sufficient evidence to qualify the machine at the 0.05 level of significance.
P-value = Φ(0.452) = 0.67364
b) The upper 95% confidence interval is:
0264.0250
)976.0(024.065.1024.
)ˆ1(ˆˆ
≤
+≤
−+≤
p
p
nppzpp α
Because the confidence interval contains the hypothesized value ( 0264.002.0 ≤=p ) we fail to reject the null hypothesis.
9-91 a)
1) The parameter of interest is the true percentage of football helmets that contain flaws, p. 2) H0 : p = 0.1 3) H1 : p > 0.1
4) ( )00
00 1 pnp
npxz−
−= or
( )nppppz
00
00 1
ˆ−
−= ; Either approach will yield the same conclusion
5) Reject H0 if z0 > zα where α = 0.01 and zα = z0.01 = 2.33
6) x = 16 n = 200 08.020016ˆ ==p
( )
94.0
200)10.01(10.0
10.008.01ˆ
00
00 −=
−
−=
−
−=
npppp
z
7) Because –0.94 < 2.33 fail to reject the null hypothesis. There is not enough evidence to conclude that the proportion of football helmets with flaws exceeds 10%.
P-value = 1- Φ(-0.94) =0.8264
b) The 99% lower confidence interval:
Applied Statistics and Probability for Engineers, 5th edition March 15, 2010
9-38
p
p
pnppzp
≤
≤−
≤−
−
035.0200
)92.0(08.033.208.
)ˆ1(ˆˆ α
Because the confidence interval contains the hypothesized value ( 1.0035.0 =≤ p ) we fail to reject the null hypothesis.
9-92 a)
1) The parameter of interest is the true proportion of engineering students planning graduate studies 2) H0 : p = 0.50
3) H1 : p ≠ 0.50
4) ( )00
00 1 pnp
npxz
−
−= or
( )npppp
z00
00 1
ˆ−
−= ; Either approach will yield the same conclusion
5) Reject H0 if z0 < − zα/2 where α = 0.05 and −zα/2 = −z0.025 = −1.96 or z0 > zα/2 where α = 0.05 and zα/2 = z0.025 = 1.96
6) x = 117 n = 484 2423.0484117ˆ ==p
( )
36.11)5.0)(5.0(484)5.0(484117
1 00
00 −=
−=
−
−=
pnpnpx
z
7) Because −11.36 > −1.65 reject the null hypothesis and conclude that the true proportion of engineering students planning graduate studies is significantly different from 0.5, at α = 0.05.
P-value = 2[1 − Φ(11.36)] ≅ 0
b) 242.0484117ˆ ==p
280.0204.0484
)758.0(242.096.1242.0484
)758.0(242.096.1242.0
)ˆ1(ˆˆ)ˆ1(ˆˆ 2/2/
≤≤
−≤≤−
−+≤≤
−−
p
p
nppzpp
nppzp αα
Because the 95% confidence interval does not contain the value 0.5 we conclude that the true proportion of engineering students planning graduate studies is significantly different from 0.5.
9-93 1) The parameter of interest is the true proportion of batteries that fail before 48 hours, p. 2) H0 : p = 0.002 3) H1 : p < 0.002
4) ( )00
00 1 pnp
npxz−
−= or
( )nppppz
00
00 1
ˆ−
−= ; Either approach will yield the same conclusion
5) Reject H0 if z0 < -zα where α = 0.01 and -zα = -z0.01 = -2.33
6) x = 15 n = 5000 003.0500015ˆ ==p
Applied Statistics and Probability for Engineers, 5th edition March 15, 2010
9-39
( )
58.1
5000)998.01(002.0
002.0003.01ˆ
00
00 =
−
−=
−
−=
npppp
z
7) Because 1.58 > -2.33 fail to reject the null hypothesis. There is not sufficient evidence to conclude that the proportion of cell phone batteries that fail is less than 0.2% at α = 0.01.
9-94. The problem statement implies that H0: p = 0.6, H1: p > 0.6 and defines an acceptance region as and
rejection region as a) The probability of a type 1 error is
( ) ( ) 08535.0)37.1(137.1
500)4.0(6.06.063.06.0|63.0ˆ =<−=≥=
⎟⎟⎟⎟
⎠
⎞
⎜⎜⎜⎜
⎝
⎛−
≥==≥= ZPZPZPppPα.
b) β = P( ≤ 0.63 | p = 0.75) = P(Z ≤ −6.196) = 0. 9-95 a) The parameter of interest is the true proportion of engine crankshaft bearings exhibiting surface roughness. 2) H0 : p = 0.10 3) H1 : p > 0.10
4)( )00
00 1 pnp
npxz
−
−= or
( )npppp
z00
00 1
ˆ−
−= ; Either approach will yield the same conclusion
5) Reject H0 if z0 > zα where α = 0.05 and zα = z0.05 = 1.65
6) x = 10 n = 85 118.08510ˆ ==p
( )
54.0)90.0)(10.0(85)10.0(8510
1 00
00 =
−=
−
−=
pnpnpx
z
7) Because 0.54 < 1.65 fail to reject the null hypothesis. There is not enough evidence to conclude that the true proportion of crankshaft bearings exhibiting surface roughness exceeds 0.10, at α = 0.05.
P-value = 1 – Φ(0.54) = 0.295 b) p= 0.15, p0=0.10, n=85, and zα/2=1.96
639.00016.06406.0)94.2()36.0(
85/)15.01(15.0
85/)10.01(10.096.115.010.0
85/)15.01(15.0
85/)10.01(10.096.115.010.0
/)1(
/)1(
/)1(
/)1( 002/0002/0
=−=−Φ−Φ=
⎟⎟
⎠
⎞
⎜⎜
⎝
⎛
−
−−−Φ−
⎟⎟
⎠
⎞
⎜⎜
⎝
⎛
−
−+−Φ=
⎟⎟
⎠
⎞
⎜⎜
⎝
⎛
−
−−−Φ−
⎟⎟
⎠
⎞
⎜⎜
⎝
⎛
−
−+−Φ=
npp
nppzpp
npp
nppzpp ααβ
Applied Statistics and Probability for Engineers, 5th edition March 15, 2010
9-40
11863.117)85.10(
10.015.0)15.01(15.028.1)10.01(10.096.1
)1()1(
2
2
2
0
002/
≅==
⎟⎟
⎠
⎞
⎜⎜
⎝
⎛
−
−−−=
⎟⎟
⎠
⎞
⎜⎜
⎝
⎛
−
−−−=
ppppzppz
n βα
Applied Statistics and Probability for Engineers, 5th edition March 15, 2010
9-41
Section 9-7 9-96 Expected Frequency is found by using the Poisson distribution
!
)(x
exXPxλλ−
== where 41.1100/)]4(4)11(3)31(2)30(1)24(0[ =++++=λ
Value 0 1 2 3 4 Observed Frequency 24 30 31 11 4 Expected Frequency 30.12 36.14 21.69 8.67 2.60
Since value 4 has an expected frequency less than 3, combine this category with the previous category:
Value 0 1 2 3-4 Observed Frequency 24 30 31 15 Expected Frequency 30.12 36.14 21.69 11.67
The degrees of freedom are k − p − 1 = 4 − 0 − 1 = 3 a) 1) The variable of interest is the form of the distribution for X. 2) H0: The form of the distribution is Poisson 3) H1: The form of the distribution is not Poisson 4) The test statistic is
( )∑=
−=
k
i i
ii
EEO
1
220χ
5) Reject H0 if for α = 0.05
6) ( ) ( ) ( ) ( ) 23.7
67.1167.1115
69.2169.2131
14.3614.3630
12.3012.3024 2222
20 =
−+
−+
−+
−=χ
7) Because 7.23 < 7.81 fail to reject H0. We are unable to reject the null hypothesis that the distribution of X is Poisson.
b) The P-value is between 0.05 and 0.1 using Table IV. From Minitab the P-value = 0.0649.
9-97 Expected Frequency is found by using the Poisson distribution
!
)(x
exXPxλλ−
== where 907.475/)]9(8)10(7)11(2)1(1[ =++++= …λ
Estimated mean = 4.907
Value 1 2 3 4 5 6 7 8 Observed Frequency 1 11 8 13 11 12 10 9 Expected Frequency 2.7214 6.6770 10.9213 13.3977 13.1485 10.7533 7.5381 4.6237
Since the first category has an expected frequency less than 3, combine it with the next category:
Value 1-2 3 4 5 6 7 8 Observed Frequency 12 8 13 11 12 10 9 Expected Frequency 9.3984 10.9213 13.3977 13.1485 10.7533 7.5381 4.6237
The degrees of freedom are k − p − 1 = 7 − 1 − 1 = 5 a) 1) The variable of interest is the form of the distribution for the number of flaws. 2) H0: The form of the distribution is Poisson 3) H1: The form of the distribution is not Poisson 4) The test statistic is
Applied Statistics and Probability for Engineers, 5th edition March 15, 2010
9-42
( )χ02
2
1=
−
=∑O EEi i
ii
k
5) Reject H0 if χ χo2
0 0152 1509> =. , . for α = 0.01
6)
( ) ( )χ0
22 212 9 3984
9 39849 4 6237
4 6237=
−+ +
−=
..
..
6.955
7) Because 6.955 < 15.09 fail to reject H0. We are unable to reject the null hypothesis that the distribution of the number of flaws is Poisson.
b) P-value = 0.2237 (from Minitab) 9-98 Estimated mean = 10.131
Value 5 6 8 9 10 11 12 13 14 15 Rel. Freq 0.067 0.067 0.100 0.133 0.200 0.133 0.133 0.067 0.033 0.067 Observed
(Days) 2 2 3 4 6 4 4 2 1 2
Expected (Days)
1.0626 1.7942 3.2884 3.7016 3.7501 3.4538 2.9159 2.2724 1.6444 1.1106
Because there are several cells with expected frequencies less than 3, the revised table is:
Value 5-8 9 10 11 12-15 Observed
(Days) 7 4 6 4 9
Expected (Days)
6.1452 3.7016 3.7501 3.4538 7.9433
The degrees of freedom are k − p − 1 = 5 − 1 − 1 = 3
a) 1) Interest is on the form of the distribution for the number of calls arriving to a switchboard from noon to 1pm during business days.
2) H0: The form of the distribution is Poisson 3) H1: The form of the distribution is not Poisson 4) The test statistic is
5) Reject H0 if for α = 0.05 6)
( ) ( ) ( ) ( ) ( ) 1.72 9433.79433.79
4538.34538.34
7501.37501.36
7016.37016.34
1452.61452.67 22222
20 =
−+
−+
−+
−+
−=χ
7) Because 1.72 < 7.81 fail to reject H0. We are unable to reject the null hypothesis that the distribution for the number of calls is Poisson.
b) The P-value is between 0.9 and 0.5 using Table IV. P-value = 0.6325 (found using Minitab)
Applied Statistics and Probability for Engineers, 5th edition March 15, 2010
9-43
9-99 Use the binomial distribution to get the expected frequencies with the mean = np = 6(0.25) = 1.5
Value 0 1 2 3 4 Observed 4 21 10 13 2 Expected 8.8989 17.7979 14.8315 6.5918 1.6479
The expected frequency for value 4 is less than 3. Combine this cell with value 3:
Value 0 1 2 3-4 Observed 4 21 10 15 Expected 8.8989 17.7979 14.8315 8.2397
The degrees of freedom are k − p − 1 = 4 − 0 − 1 = 3 a) 1) The variable of interest is the form of the distribution for the random variable X. 2) H0: The form of the distribution is binomial with n = 6 and p = 0.25 3) H1: The form of the distribution is not binomial with n = 6 and p = 0.25 4) The test statistic is
( )χ02
2
1=
−
=∑O EEi i
ii
k
5) Reject H0 if χ χo2
0 05 32 781> =. , . for α = 0.05
6)
( ) ( )χ0
22 24 88989
8898915 8 2397
8 2397=
−+ +
−=
..
..
10.39
7) Since 10.39 > 7.81 reject H0. We can conclude that the distribution is not binomial with n = 6 and p =
0.25 at α = 0.05. b) P-value = 0.0155 (from Minitab) 9-100 The value of p must be estimated. Let the estimate be denoted by
sample mean = + + +=
0 39 1 23 2 12 3 175
06667( ) ( ) ( ) ( ) .
02778.0246667.0ˆ ===
nmeansamplepsample
Value 0 1 2 3
Observed 39 23 12 1 Expected 38.1426 26.1571 8.5952 1.8010
Because the value 3 has an expected frequency less than 3, combine this category with that of the value 2:
Value 0 1 2-3 Observed 39 23 13 Expected 38.1426 26.1571 10.3962
The degrees of freedom are k − p − 1 = 3 − 1 − 1 = 1
a) 1) The variable of interest is the form of the distribution for the number of underfilled cartons, X. 2) H0: The form of the distribution is binomial 3) H1: The form of the distribution is not binomial 4) The test statistic is
Applied Statistics and Probability for Engineers, 5th edition March 15, 2010
9-44
5) Reject H0 if for α = 0.05
6)
7) Because 1.053 < 3.84 fail to reject H0. We are unable to reject the null hypothesis that the distribution of the number of underfilled cartons is binomial at α = 0.05.
b) The P-value is between 0.5 and 0.1 using Table IV. From Minitab the P-value = 0.3048. 9-101 Estimated mean = 49.6741 use Poisson distribution with λ=49.674 All expected frequencies are greater than 3. The degrees of freedom are k − p − 1 = 26 − 1 − 1 = 24 a) 1) The variable of interest is the form of the distribution for the number of cars passing through the
intersection. 2) H0: The form of the distribution is Poisson 3) H1: The form of the distribution is not Poisson 4) The test statistic is
( )χ02
2
1=
−
=∑O EEi i
ii
k
5) Reject H0 if χ χo2
0 05 242 3642> =. , . for α = 0.05
6) Estimated mean = 49.6741
χ02 76957= .
7) Because 769.57 >> 36.42, reject H0. We can conclude that the distribution is not Poisson at α = 0.05.
b) P-value = 0 (found using Minitab) 9-102 The expected frequency is determined by using the Poisson distribution
Number of Earthquakes Frequency Expected Frequency
6 1 0.034028
7 1 0.093554
8 4 0.225062
10 3 0.926225
11 4 1.620512
12 3 2.598957
13 6 3.847547
14 5 5.289128
15 11 6.786111
16 8 8.162612
17 3 9.240775
18 9 9.880162
19 4 10.0078
20 4 9.630233
21 7 8.82563
22 8 7.720602
Applied Statistics and Probability for Engineers, 5th edition March 15, 2010
9-45
23 4 6.460283
24 3 5.180462
25 2 3.988013
26 4 2.951967
27 4 2.104146
28 1 1.446259
29 1 0.95979
30 1 0.61572
31 1 0.382252
32 2 0.229894
34 1 0.075891
35 1 0.04173
36 2 0.022309
39 1 0.0029
41 1 0.000655
!
)(x
exXPxλλ−
== where 245.19110/)]1(41)1(39)1(7)1(6[ =++++= …λ
Estimated mean = 19. 245
After combining categories with frequencies less than 3, we obtain the following table: Number of earthquakes Frequency
Expected Frequency Chi squared
6-‐12 16 5.498338644 20.05786
13 6 3.847546747 1.204158
14 5 5.289127574 0.015805
15 11 6.786110954 2.616648
16 8 8.162611869 0.003239
17 3 9.240775041 4.214719
18 9 9.880162001 0.078408
19 4 10.00780046 3.606553
20 4 9.63023344 3.291668
21 7 8.825629521 0.377641
22 8 7.720602353 0.010111
23 4 6.460282681 0.936954
24 3 5.180461528 0.917758
25 2 3.988013475 0.991019 26-‐32, 34-‐36,
39, 41 20 8.83351213 14.11561 The degrees of freedom are k − p − 1 = 15 − 1 − 1 = 13
a)
1) The variable of interest is the form of the distribution for the number of earthquakes per year of magnitude 7.0 and greater..
Applied Statistics and Probability for Engineers, 5th edition March 15, 2010
9-46
2) H0: The form of the distribution is Poisson 3) H1: The form of the distribution is not Poisson 4) The test statistic is
( )χ02
2
1=
−
=∑O EEi i
ii
k
5) Reject H0 if 36.22213,05.0
2 => χχo for α = 0.05
6)
( ) ( ) 52.44
83.883.820
50.550.516 22
20 =
−++
−= χ
7) Because 52.44 > 22.36 reject H0. The form of the distribution of the number of earthquakes is not Poisson.
b) P-value < 0.005 Section 9-8 9-103 1. The variable of interest is breakdowns among shift. 2. H0: Breakdowns are independent of shift. 3. H1: Breakdowns are not independent of shift.
4. The test statistic is:
( )∑∑= =
−=
r
i
c
j ij
ijij
EEO
1 1
220χ
5. The critical value is 592.122
6,05. =χ for α = 0.05
6. The calculated test statistic is 65.112
0 =χ
7. Because fail to reject H0. The data provide insufficient evidence to claim that
machine breakdown and shift are dependent at α = 0.05. P-value = 0.070 (using Minitab)
9-104 1. The variable of interest is calls by surgical-medical patients. 2. H0: Calls by surgical-medical patients are independent of Medicare status. 3. H1: Calls by surgical-medical patients are not independent of Medicare status.
4. The test statistic is:
( )∑∑= =
−=
r
i
c
j ij
ijij
EEO
1 1
220χ
5. The critical value is 637.62
1,01. =χ for α = 0.01
6. The calculated test statistic is 033.02
0 =χ
7. Because 21,01.0
20 χχ >/ fail to reject H0. The evidence is not sufficient to claim that surgical-medical patients and
Medicare status are dependent. P-value = 0.85 9-105 1. The variable of interest is statistics grades and OR grades. 2. H0: Statistics grades are independent of OR grades. 3. H1: Statistics and OR grades are not independent.
4. The test statistic is:
( )∑∑= =
−=
r
i
c
j ij
ijij
EEO
1 1
220χ
Applied Statistics and Probability for Engineers, 5th edition March 15, 2010
9-47
5. The critical value is 665.212
9,01. =χ for α = 0.01
6. The calculated test statistic is 55.252
0 =χ
7. 29,01.0
20 χχ > Therefore, reject H0 and conclude that the grades are not independent at α = 0.01.
P-value = 0.002 9-106 1. The variable of interest is characteristic among deflections and ranges. 2. H0: Deflection and range are independent. 3. H1: Deflection and range are not independent.
4. The test statistic is:
( )∑∑= =
−=
r
i
c
j ij
ijij
EEO
1 1
220χ
5. The critical value is 488.92
4,05.0 =χ for α = 0.05
6. The calculated test statistic is 46.22
0 =χ
7. Because 24,05.0
20 χχ >/ fail to reject H0. The evidence is not sufficient to claim that the data are dependent at α =
0.05. The P-value = 0.652 9-107 1. The variable of interest is failures of an electronic component. 2. H0: Type of failure is independent of mounting position. 3. H1: Type of failure is not independent of mounting position.
4. The test statistic is:
( )∑∑= =
−=
r
i
c
j ij
ijij
EEO
1 1
220χ
5. The critical value is 344.112
3,01.0 =χ for α = 0.01
6. The calculated test statistic is 71.102
0 =χ
7. Because 23,01.0
20 χχ >/ fail to reject H0. The evidence is not sufficient to claim that the type of failure is not
independent of the mounting position at α = 0.01. P-value = 0.013 9-108 1. The variable of interest is opinion on core curriculum change. 2. H0: Opinion of the change is independent of the class standing. 3. H1: Opinion of the change is not independent of the class standing.
4. The test statistic is:
( )∑∑= =
−=
r
i
c
j ij
ijij
EEO
1 1
220χ
5. The critical value is 815.72
3,05.0 =χ for α = 0.05
6. The calculated test statistic is 97.262
0. =χ .
7. 23,05.0
20 χχ >>> , reject H0 and conclude that opinion on the change and class standing are not independent. P-
value ≈ 0 9-109 a)
1. The variable of interest is successes. 2. H0: successes are independent of size of stone. 3. H1: successes are not independent of size of stone.
4. The test statistic is:
Applied Statistics and Probability for Engineers, 5th edition March 15, 2010
9-48
( )∑∑= =
−=
r
i
c
j ij
ijij
EEO
1 1
220χ
5. The critical value is 84.32
1,05. =χ for α = 0.05
6. The calculated test statistic 2
0χ = 13.766 with details below.
7. 21,05.0
20 χχ > , reject H0 and conclude that the number of successes and the stone size are not independent.
1 2 All 1 55 25 80 66.06 13.94 80.00 2 234 36 270 222.94 47.06 270.00 All 289 61 350 289.00 61.00 350.00 Cell Contents: Count Expected count Pearson Chi-Square = 13.766, DF = 1, P-Value = 0.000 b) P-value < 0.005
9-110 a)
1. The parameter of interest is the median of pH.
0.7~:30.7~:.2
1
0
≠
=
µ
µ
HH
4. The test statistic is the observed number of plus differences or r+ = 8 for α = 0.05. 5. We reject H0 if the P-value corresponding to r+ = 8 is less than or equal to α = 0.05. 6. Using the binomial distribution with n = 10 and p = 0.5, the P-value = 2P(R+ ≥ 8 | p = 0.5) = 0.1 7. Conclusion: we fail to reject H0. There is not enough evidence to reject the manufacturer’s claim that the median of the pH is 7.0
b)
1. The parameter of interest is median of pH.
0.7~:30.7~:.2
1
0
≠
=
µ
µ
HH
4. The test statistic is nnrz
5.05.0*
0−
=
5. We reject H0 if |Z0|>1.96 for α=0.05.
6. r*=8 and 90.1105.0)10(5.08
5.05.0*
0 =−
=−
=nnrz
7. Conclusion: we fail to reject H0. There is not enough evidence to reject the manufacturer’s claim that the median of the pH is 7.0
P-value = 2[1 - P(|Z0| < 1.90)] = 2(0.0287) = 0.0574 9-111 a)
1. The parameter of interest is median titanium content.
5.8~:35.8~:.2
1
0
≠
=
µ
µ
HH
4. The test statistic is the observed number of plus differences or r+ = 7 for α = 0.05. 5. We reject H0 if the P-value corresponding to r+ = 7 is less than or equal to α = 0.05. 6. Using the binomial distribution with n = 20 and p = 0.5, P-value = 2P( R* ≤ 7 | p = 0.5) = 0.1315 7. Conclusion: we fail to reject H0. There is not enough evidence to reject the manufacturer’s claim that the median of the titanium content is 8.5.
Applied Statistics and Probability for Engineers, 5th edition March 15, 2010
9-49
b) 1. Parameter of interest is the median titanium content
5.8~:.35.8~:.2
1
0
≠
=
µ
µ
HH
4. Test statistic is nnrz
5.05.0
0−
=+
5. We reject H0 if the |Z0| > Z0.025 = 1.96 for α=0.05 6. Computation: 34.1
205.0)20(5.07
0 −=−
=z
7. Conclusion: we fail to reject H0. There is not enough evidence to conclude that the median titanium content differs from 8.5. The P-value = 2*P( Z < -1.34) = 0.1802.
9-112 a)
1. Parameter of interest is the median impurity level.
5.2~:.35.2~:.2
1
0
<
=
µ
µ
HH
4. The test statistic is the observed number of plus differences or r+ = 2 for α = 0.05. 5. We reject H0 if the P-value corresponding to r+ = 2 is less than or equal to α = 0.05. 6. Using the binomial distribution with n = 22 and p = 0.5, the P-value = P(R+ ≤ 2 | p = 0.5) = 0.0002 7. Conclusion, reject H0. The data supports the claim that the median is impurity level is less than 2.5.
b) 1. Parameter of interest is the median impurity level
5.2~:.35.2~:.2
1
0
<
=
µ
µ
HH
4. Test statistic is nnrz
5.05.0
0−
=+
5. We reject H0 if the Z0 < Z0.05 = -1.65 for α=0.05 6. Computation: 84.3
225.0)22(5.02
0 −=−
=z
7. Conclusion: reject H0 and conclude that the median impurity level is less than 2.5. The P-value = P(Z < -3.84) = 0.000062
9-113 a)
1. Parameter of interest is the median margarine fat content
0.17~:.30.17~:.2
1
0
≠
=
µ
µ
HH
4. α=0.05 5. The test statistic is the observed number of plus differences or r+ = 3. 6. We reject H0 if the P-value corresponding to r+ = 3 is less than or equal to α=0.05. 7. Using the binomial distribution with n = 6 and p = 0.5, the P-value = 2*P(R+≥3|p=0.5,n=6) ≈ 1. 8. Conclusion: fail to reject H0. There is not enough evidence to conclude that the median fat content differs from 17.0.
b) 1. Parameter of interest is the median margarine fat content
0.17~:.30.17~:.2
1
0
≠
=
µ
µ
HH
4. Test statistic is nnrz
5.05.0
0−
=+
5. We reject H0 if the |Z0| > Z0.025 = 1.96 for α=0.05
Applied Statistics and Probability for Engineers, 5th edition March 15, 2010
9-50
6. Computation: 065.0)6(5.03
0 =−
=z
7. Conclusion: fail to reject H0. The P-value = 2[1 – Φ(0)] = 2(1 – 0.5) = 1. There is not enough evidence to conclude that the median fat content differs from 17.0.
9-114 a)
1. Parameter of interest is the median compressive strength
2250~:.32250~:.2
1
0
>
=
µ
µ
HH
4. The test statistic is the observed number of plus differences or r+ = 7 for α = 0.05 5. We reject H0 if the P-value corresponding to r+ = 7 is less than or equal to α=0.05. 6. Using the binomial distribution with n = 12 and p = 0.5, the P-value = P( R+ ≥ 7 | p = 0.5) = 0.3872 7. Conclusion: fail to reject H0. There is not enough evidence to conclude that the median compressive strength is greater than 2250.
b) 1. Parameter of interest is the median compressive strength
2250~:.32250~:.2
1
0
>
=
µ
µ
HH
4. Test statistic is nnrz
5.05.0
0−
=+
5. We reject H0 if the |Z0| > Z0.025 = 1.96 for α=0.05 6. Computation: 577.0
125.0)12(5.07
0 =−
=z
7. Conclusion: fail to reject H0. The P-value = 1 – Φ(0.58) = 1 – 0.7190 = 0.281. There is not enough evidence to conclude that the median compressive strength is greater than 2250.
9-115 a)
1) The parameter of interest is the mean ball diameter 2) H0: 265.00 =µ
3) H0: 265.00 ≠µ 4) w = min(w+, w-)
5) Reject H0 if 5*9,05.0 =≤ =nww for α = 0.05
6) Usually zeros are dropped from the ranking and the sample size is reduced. The sum of the positive ranks is w+ = (1+4.5+4.5+4.5+4.5+8.5+8.5) = 36. The sum of the negative ranks is w- = (4.5+4.5) = 9. Therefore, w = min(36, 9) = 9.
observation Difference xi - 0.265 Signed Rank 1 0 - 6 0 - 9 0 - 3 0.001 1 2 -0.002 -4.5 4 0.002 4.5 5 0.002 4.5 7 0.002 4.5 8 0.002 4.5
12 -0.002 -4.5 10 0.003 8.5 11 0.003 8.5
Applied Statistics and Probability for Engineers, 5th edition March 15, 2010
9-51
7) Conclusion: because w- = 9 is not less than or equal to the critical value 5*9,05.0 ==nw , we fail to reject the null
hypothesis that the mean ball diameter is 0.265 at the 0.05 level of significance. b)
5993.124/)19)(10(94/)10(936
24/)12)(1(4/)1(
0 =−
=++
+−=
+
nnnnnWZ
and Z0.025 = 1.96. Because Z0 = 1.5993< Z0.025 = 1.96 we fail to reject the null hypothesis that the mean ball diameter is 0.265 at the 0.05 level of significance. Also, the P-value = 2[1 – P(Z0 < 1.5993) ]= 0.1098.
9-116 1) The parameter of interest is hardness reading
2) H0: 600 =µ
3) H0: 600 >µ 4) w-
5) Reject H0 if 3*7,05.0 =≤ =
−nww for α = 0.05
6) The sum of the positive rank is w+ = (3.5+5.5) = 9. The sum of the negative rank is w- = (1+2+3.5+5.5+7) = 19.
observation Difference xi - 60 Sign Rank 4 0 - 8 -1 -1 3 -2 -2 1 3 3.5 6 -3 -3.5 2 5 5.5 5 -5 -5.5 7 -7 -7
7) Conclusion: Because w- = 19 is not less than or equal to the critical value 3*7,05.0 ==nw , we fail to reject the null
hypothesis that the mean hardness reading is greater than 60. 9-117 1) The parameter of interest is the mean dying time of the primer
2) H0: 5.10 =µ
3) H0: 5.10 >µ 4) w-
5) Reject H0 if 41*17,05.0 =≤ =
−nww for α = 0.05
6) The sum of the positive rank is w+ = (4+4+4+4+4+9.5+9.5+13.5+13.5+13.5+13.5+16.5+16.5) = 126. The sum of the negative rank is w- = (4+4+9.5+9.5) = 27.
Observation Difference xi - 1.5 Sign Rank 1.5 0 - 1.5 0 - 1.5 0 - 1.6 0.1 4 1.6 0.1 4 1.6 0.1 4 1.4 -0.1 -4 1.6 0.1 4 1.4 -0.1 -4
Applied Statistics and Probability for Engineers, 5th edition March 15, 2010
9-52
1.6 0.1 4 1.3 -0.2 -9.5 1.7 0.2 9.5 1.7 0.2 9.5 1.3 -0.2 -9.5 1.8 0.3 13.5 1.8 0.3 13.5 1.8 0.3 13.5 1.8 0.3 13.5 1.9 0.4 16.5 1.9 0.4 16.5
7) Conclusion: Because w- = 27 is less than the critical value 41*17,05.0 ==nw , we reject the null hypothesis that the
mean dying time of the primer exceeds 1.5.
Applied Statistics and Probability for Engineers, 5th edition March 15, 2010
9-53
Supplemental Exercises
9-118 a) SE Mean 401.05.1===
NNσ
, so n = 14
3495.114/5.126541.26
0 =−
=z
P-value = 0886.09114.01)3495.1(1)(1 0 =−=Φ−=Φ− Z
b) A one-sided test because the alternative hypothesis is mu > 26.
c) Because z0 < 1.65 and the P-value = 0.0886 > α = 0.05, we fail to reject the null hypothesis at the 0.05 level of significance.
d) 95% CI of the mean is n
zxn
zx σµ
σ025.0025.0 +<<−
145.1)96.1(541.26
145.1)96.1(541.26 +<<− µ
3268.277553.25 << µ 9-119 a) Degrees of freedom = n – 1 = 16 – 1 = 15.
b) SE Mean 1525.11661.4
===NS
4490.116/61.410033.98
0 −=−
=t
4490.10 −=t with df = 15, so 2(0.05) < P-value < 2(0.1). That is, 0.1 < P-value < 0.2.
95% CI of the mean is nStx
nStx 15,025.015,025.0 +<<− µ
1661.4)131.2(33.98
1661.4)131.2(33.98 +<<− µ
786.100874.95 << µ c) Because the P-value > α = 0.05 we fail to reject the null hypothesis at the 0.05 level of significance. d) 753.115,05.0 =t . Because t0 = -1.4490 < 753.115,05.0 =t we fail to reject the null hypothesis at the 0.05 level
of significance.
9-120 a) Degree of freedom = n – 1 = 25 – 1 = 24.
b) SE Mean 631.025
===s
Ns
, so s = 3.155
06.125/155.385331.84
0 −=−
=t
06.10 −=t with df = 24, so 0.1 < P-value < 0.25
c) Because the P-value > α = 0.05 we fail to reject the null hypothesis at the 0.05 level of significance.
d) 95% upper CI of the mean is nStx 24,05.0+<µ
Applied Statistics and Probability for Engineers, 5th edition March 15, 2010
9-54
25155.3)711.1(331.84 +<µ
4106.85<µ e) If the null hypothesis is changed to mu = 100 versus mu > 100,
832.2425/155.3100331.84
0 −=−
=t
832.240 −=t and 711.124,05.0 =t with df = 24.
Because 24,05.00 tt << we fail to reject the null hypothesis at the 0.05 level of significance.
9-121 a) The null hypothesis is µ = 12 versus µ > 12
4737.12=x , S = 3.6266, and N = 19
5694.019/6266.3124737.12
0 =−
=t with df = 19 – 1 = 18.
The P-value falls between two values 0.257 (α = 0.4) and 0.688 (α = 0.25). Thus, 0.25 < P-value < 0.4. Because the P-value > α = 0.05 we fail to reject the null hypothesis at the 0.05 level of significance.
b) 95% two-sided CI of the mean is nStx
nStx 18,025.018,025.0 +<<− µ
196266.3)101.2(4737.12
196266.3)101.2(4737.12 +<<− µ
2217.147257.10 << µ 9-122 a) The null hypothesis is µ = 300 versus µ < 300
333.275=x , s = 42.665, and n = 6
4162.16/665.42300333.275
0 −=−
=t
and 015.25,05.0 =t . Because 015.25,05.00 −=−> tt we fail to reject the null hypothesis at the 0.05 level of
significance. b) Yes, because the sample size is very small the central limit theorem’s conclusion that the distribution of the sample mean is approximately normally distributed is a concern.
c) 95% two-sided CI of the mean is nStx
nStx 5,025.05,025.0 +<<− µ
6665.42)571.2(333.275
6665.42)571.2(333.275 +<<− µ
1145.3205515.230 << µ 9-123 For α = 0.01
Applied Statistics and Probability for Engineers, 5th edition March 15, 2010
9-55
a) n = 25 9783.0)02.2()31.033.2(25/168685
01.0 =Φ=−Φ=⎟⎟⎠
⎞⎜⎜⎝
⎛ −+Φ= zβ
n = 100 9554.0)70.1()63.033.2(100/168685
01.0 =Φ=−Φ=⎟⎟⎠
⎞⎜⎜⎝
⎛ −+Φ= zβ
n = 400 8599.0)08.1()25.133.2(400/168685
01.0 =Φ=−Φ=⎟⎟⎠
⎞⎜⎜⎝
⎛ −+Φ= zβ
n = 2500 2119.0)80.0()13.333.2(2500/168685
01.0 =−Φ=−Φ=⎟⎟⎠
⎞⎜⎜⎝
⎛ −+Φ= zβ
b) n = 25 31.025/168586
0 =−
=z P-value: 3783.06217.01)31.0(1 =−=Φ−
n = 100 63.0100/168586
0 =−
=z P-value: 2643.07357.01)63.0(1 =−=Φ−
n = 400 25.1400/168586
0 =−
=z P-value: 1056.08944.01)25.1(1 =−=Φ−
n = 2500 13.32500/168586
0 =−
=z P-value: 0009.09991.01)13.3(1 =−=Φ−
The data would be statistically significant when n = 2500 at α = 0.01
9-124 Sample Mean = Sample Variance =
Sample Size, n Sampling Distribution Sample Mean Sample Variance a. 50 Normal p
b. 80 Normal p
c. 100 Normal p
d) As the sample size increases, the variance of the sampling distribution decreases. 9-125
n Test statistic P-value conclusion a. 50
12.050/)10.01(10.0
10.0095.00 −=
−
−=z
0.4522 Fail to reject H0
b. 100 15.0
100/)10.01(10.010.0095.0
0 −=−
−=z
0.4404 Fail to reject H0
Applied Statistics and Probability for Engineers, 5th edition March 15, 2010
9-56
c. 500 37.0
500/)10.01(10.010.0095.0
0 −=−
−=z
0.3557 Fail to reject H0
d.
1000 53.0
1000/)10.01(10.010.0095.0
0 −=−
−=z
0.2981 Fail to reject H0
e) The P-value decreases as the sample size increases.
9-126 σ = 12, δ = 205 − 200 = 5, z0.025 = 1.96,
a) n = 20: 564.0)163.0(1220596.1 =Φ=⎟
⎟⎠
⎞⎜⎜⎝
⎛−Φ=β
b) n = 50: 161.0839.01)986.0(1)986.0(1250596.1 =−=Φ−=−Φ=⎟
⎟⎠
⎞⎜⎜⎝
⎛−Φ=β
c) n = 100: 0116.09884.01)207.2(1)207.2(12100596.1 =−=Φ−=−Φ=⎟
⎟⎠
⎞⎜⎜⎝
⎛−Φ=β
d) β (probability of a Type II error) decreases as the sample size increases because the variance of the sample mean decreases. Consequently, the probability of observing a sample mean in the acceptance region centered about the incorrect value of 200 ml/h decreases with larger n.
9-127 σ = 14, δ = 205 − 200 = 5, z0.025 = 1.96,
a) n = 20: 6406.0)362.0(1420596.1 =Φ=⎟
⎟⎠
⎞⎜⎜⎝
⎛−Φ=β
b) n = 50: 2877.07123.01)565.0(1)565.0(1450596.1 =−=Φ−=−Φ=⎟
⎟⎠
⎞⎜⎜⎝
⎛−Φ=β
c) n = 100: 0537.09463.01)611.1(1)611.1(14100596.1 =−=Φ−=−Φ=⎟
⎟⎠
⎞⎜⎜⎝
⎛−Φ=β
d) The probability of a Type II error increases with an increase in the standard deviation.
9-128 σ = 8, δ = 204 − 200 = 4, z0.025 = 1.96.
a) n = 20: 1 − Φ(0.28) = 1 − 0.61026 = 0.38974
Therefore, power = 1 − β = 0.61026
b) n = 50: 1 − Φ(2.58) = 1 − 0.99506 = 0.00494
Therefore, power = 1 − β = 0.995
c) n = 100: 1 − Φ(3.04) = 1 − 0.99882 = 0.00118
Applied Statistics and Probability for Engineers, 5th edition March 15, 2010
9-57
Therefore, power = 1 − β = 0.9988 d) As sample size increases, and all other values are held constant, the power increases because the variance of the sample mean decreases. Consequently, the probability of a Type II error decreases, which implies the power increases.
9-129 a) α=0.05
n=100 3632.0)35.0()0.265.1(100/)5.0(5.06.05.0
05.0 =−Φ=−Φ=⎟⎟⎠
⎞⎜⎜⎝
⎛ −+Φ= zβ
6368.03632.011 =−=−= βPower
n=150 2119.0)8.0()45.265.1(100/)5.0(5.06.05.0
05.0 =−Φ=−Φ=⎟⎟⎠
⎞⎜⎜⎝
⎛ −+Φ= zβ
7881.02119.011 =−=−= βPower
n=300 03515.0)81.1()46.365.1(300/)5.0(5.06.05.0
05.0 =−Φ=−Φ=⎟⎟⎠
⎞⎜⎜⎝
⎛ −+Φ= zβ
96485.003515.011 =−=−= βPower b) α=0.01
n=100 6293.0)33.0()0.233.2(100/)5.0(5.06.05.0
01.0 =Φ=−Φ=⎟⎟⎠
⎞⎜⎜⎝
⎛ −+Φ= zβ
3707.06293.011 =−=−= βPower
n=150 4522.0)12.0()45.233.2(100/)5.0(5.06.05.0
01.0 =−Φ=−Φ=⎟⎟⎠
⎞⎜⎜⎝
⎛ −+Φ= zβ
5478.04522.011 =−=−= βPower
n=300 1292.0)13.1()46.333.2(300/)5.0(5.06.05.0
01.0 =−Φ=−Φ=⎟⎟⎠
⎞⎜⎜⎝
⎛ −+Φ= zβ
8702.01292.011 =−=−= βPower Decreasing the value of α decreases the power of the test for the different sample sizes.
c) α=0.05
n=100 0.0)35.4()0.665.1(100/)5.0(5.08.05.0
05.0 ≅−Φ=−Φ=⎟⎟⎠
⎞⎜⎜⎝
⎛ −+Φ= zβ
1011 ≅−=−= βPower The true value of p has a large effect on the power. The greater is the difference of p from p0 the larger is the power of the test. d)
Applied Statistics and Probability for Engineers, 5th edition March 15, 2010
9-58
242.23)82.4(5.06.0
)6.01(6.065.1)50.01(5.058.2
)1()1(
2
2
2
0
002/
≅==⎟⎟
⎠
⎞
⎜⎜
⎝
⎛
−
−−−=
⎟⎟
⎠
⎞
⎜⎜
⎝
⎛
−
−−−=
ppppzppz
n βα
541.4)1.2(5.08.0
)8.01(8.065.1)50.01(5.058.2
)1()1(
2
2
2
0
002/
≅==⎟⎟
⎠
⎞
⎜⎜
⎝
⎛
−
−−−=
⎟⎟
⎠
⎞
⎜⎜
⎝
⎛
−
−−−=
ppppzppz
n βα
The true value of p has a large effect on the sample size. The greater is the distance of p from p0 the smaller is the sample size that is required.
9-130 a) Rejecting a null hypothesis provides a stronger conclusion than failing to reject a null hypothesis. Therefore, place
what we are trying to demonstrate in the alternative hypothesis. Assume that the data follow a normal distribution. b) 1) the parameter of interest is the mean weld strength, µ. 2) H0 : µ = 150 3) H1 : µ > 150 4) The test statistic is:
ns
xt
/0
0µ−
=
5) Since no given value of alpha, so no critical value is given. We will calculate the P-value 6) , s= 11.3, n=20
46.120/3.111507.153
0 =−
=t
P-value = P(t > 1.46) = 0.05 < P-value < 0.10 7) There is some modest evidence to support the claim that the weld strength exceeds 150 psi.
If we used α = 0.01 or 0.05, we would fail to reject the null hypothesis, thus the claim would not be supported. If we used α = 0.10, we would reject the null in favor of the alternative and conclude the weld strength exceeds 150 psi.
9-131
a)
d = 21
|7573||| 0 =−
=−
=σµµ
σδ
Using the OC curve for α = 0.05, d = 2, and n = 10, β ≅ 0.0 and power of 1−0.0 ≅ 1.
d = 31
|7572||| 0 =−
=−
=σµµ
σδ
Using the OC curve for α = 0.05, d = 3, and n = 10, β ≅ 0.0 and power of 1−0.0 ≅ 1.
Applied Statistics and Probability for Engineers, 5th edition March 15, 2010
9-59
b) d = 21
|7573||| 0 =−
=−
=σµµ
σδ
Using the OC curve, Chart VII e) for α = 0.05, d = 2, and β ≅ 0.1 (Power=0.9), 5* =n .
Therefore, 3215
21*
=+
=+
=nn
d = 31
|7572||| 0 =−
=−
=σµµ
σδ
Using the OC curve, Chart VII e) for α = 0.05, d = 3, and β ≅ 0.1 (Power=0.9), 3* =n .
Therefore, 2213
21*
=+
=+
=nn
c) 2=σ
d = 12
|7573||| 0 =−
=−
=σµµ
σδ
Using the OC curve for α = 0.05, d = 1, and n = 10, β ≅ 0.10 and power of 1− 0.10 ≅ 0.90.
d = 5.12
|7572||| 0 =−
=−
=σµµ
σδ
Using the OC curve for α = 0.05, d = 1.5, and n = 10, β ≅ 0.04 and power of 1− 0.04 ≅ 0.96.
d = 12
|7573||| 0 =−
=−
=σµµ
σδ
Using the OC curve, Chart VII e) for α = 0.05, d = 1, and β ≅ 0.1 (Power=0.9), 10* =n .
Therefore, 5.52110
21*
=+
=+
=nn n ≅ 6
d = 5.12
|7572||| 0 =−
=−
=σµµ
σδ
Using the OC curve, Chart VII e) for α = 0.05, d = 3, and β ≅ 0.1 (Power=0.9), 7* =n .
Therefore, 4217
21*
=+
=+
=nn
Increasing the standard deviation decreases the power of the test and increases the sample size required to obtain a certain power.
9-132 Assume the data follow a normal distribution. a) 1) The parameter of interest is the standard deviation, σ. 2) H0 : σ2 = (0.00002)2 3) H1 : σ2 < (0.00002)2
4) The test statistic is:
5) reject H0 if for α = 0.01
6) s = 0.00001 and α = 0.01
75.1)00002.0()00001.0(72
220 ==χ
Applied Statistics and Probability for Engineers, 5th edition March 15, 2010
9-60
7) Conclusion: Because 1.75 > 1.24 we fail to reject the null hypothesis. That is, there is insufficient evidence to conclude the standard deviation is at most 0.00002 mm.
b) Although the sample standard deviation is less than the hypothesized value of 0.00002, it is not significantly less (when α = 0.01) than 0.00002. The value of 0.00001 could have occurred as a result of sampling variation.
9-133 Assume the data follow a normal distribution. 1) The parameter of interest is the standard deviation of the concentration, σ. 2) H0 : σ2 =42 3) H1 : σ2 < 42
4) The test statistic is:
5) Since no given value of alpha, so no critical value is given. We will calculate the P-value 6) s = 0.004 and n = 10
000009.0)4()004.0(9
2
220 ==χ
P-value = ( );00009.02 <χP .0≅− valueP 7) Conclusion: The P-value is approximately 0. Therefore we reject the null hypothesis and conclude that the standard deviation of the concentration is less than 4 grams per liter.
9-134
Create a table for the number of nonconforming coil springs (value) and the observed number of times the number appeared. One possible table is:
Value 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 Obs 0 0 0 1 4 3 4 6 4 3 0 3 3 2 1 1 0 2 1 2
The value of p must be estimated. Let the estimate be denoted by psample
sample mean 9.32540
)2(19)0(2)0(1)0(0=
++++=
1865.050325.9ˆ ===
nmeansamplepsample
Value Observed Expected 0 0 0.00165 1 0 0.01889 2 0 0.10608 3 1 0.38911 4 4 1.04816 5 3 2.21073 6 4 3.80118 7 6 5.47765 8 4 6.74985 9 3 7.22141 10 0 6.78777 11 3 5.65869 12 3 4.21619 13 2 2.82541 14 1 1.71190 15 1 0.94191 16 0 0.47237 17 2 0.21659 18 1 0.09103 19 2 0.03515
Applied Statistics and Probability for Engineers, 5th edition March 15, 2010
9-61
Because several of the expected values are less than 3, some cells must be combined resulting in the following table:
Value Observed Expected
0-5 8 3.77462 6 4 3.80118 7 6 5.47765 8 4 6.74985 9 3 7.22141
10 0 6.78777 11 3 5.65869 12 3 4.21619 ≥13 9 6.29436
The degrees of freedom are k − p − 1 = 9 − 1 − 1 = 7
a) 1) The variable of interest is the form of the distribution for the number of nonconforming coil springs. 2) H0: The form of the distribution is binomial 3) H1: The form of the distribution is not binomial 4) The test statistic is
( )χ02
2
1=
−
=∑O EEi i
ii
k
5) Reject H0 if for α = 0.05 6)
7) Because 17.929 > 14.07 reject H0. We conclude that the distribution of nonconforming springs is not binomial at α = 0.05.
b) P-value = 0.0123 (from Minitab) 9-135
Create a table for the number of errors in a string of 1000 bits (value) and the observed number of times the number appeared. One possible table is:
Value 0 1 2 3 4 5 Obs 3 7 4 5 1 0
The value of p must be estimated. Let the estimate be denoted by psample
sample mean 7.120
)0(5)1(4)5(3)4(2)7(1)3(0=
+++++=
0017.010007.1ˆ ===
nmeansamplepsample
Value 0 1 2 3 4 5 Observed 3 7 4 5 1 0 Expected 3.64839 6.21282 5.28460 2.99371 1.27067 0.43103
Because several of the expected values are less than 3, some cells are combined resulting in the following table:
Value 0 1 2 ≥3 Observed 3 7 4 6 Expected 3.64839 6.21282 5.28460 4.69541
The degrees of freedom are k − p − 1 = 4 − 1 − 1 = 2 a) 1) The variable of interest is the form of the distribution for the number of errors in a string of 1000 bits.
Applied Statistics and Probability for Engineers, 5th edition March 15, 2010
9-62
2) H0: The form of the distribution is binomial 3) H1: The form of the distribution is not binomial 4) The test statistic is
( )∑=
−=
k
i i
ii
EEO
1
220χ
5) Reject H0 if χ χ02
0 05 22 599> =. , . for α = 0.05
6)
( ) ( ) 0.88971
69541.469541.46
64839.364839.33 22
20 =
−++
−= χ
7) Because 0.88971 < 9.49 fail to reject H0. We are unable to reject the null hypothesis that the distribution of the number of errors is binomial at α = 0.05.
b) P-value = 0.6409 (found using Minitab) 9-136 Divide the real line under a standard normal distribution into eight intervals with equal probability. These intervals are
[0, 0.32), [0.32, 0.675), [0.675, 1.15), [1.15, ∞) and their negative counterparts. The probability for each interval is p = 1/8 = 0.125 so the expected cell frequencies are E = np = (100) (0.125) = 12.5. The table of ranges and their corresponding frequencies is completed as follows.
Interval Obs. Frequency. Exp. Frequency. x ≤ 5332.5 1 12.5
5332.5< x ≤ 5357.5 4 12.5 5357.5< x ≤ 5382.5 7 12.5 5382.5< x ≤ 5407.5 24 12.5 5407.5< x ≤ 5432.5 30 12.5 5432.5< x ≤ 5457.5 20 12.5 5457.5< x ≤ 5482.5 15 12.5 x ≥ 5482.5 5 12.5
The test statistic is:
36.635.12
)5.125(5.12
12.5)-(155.12
)5.124(5.12
12.5)-(1 2222
20 =
−+++
−+= χ
and we would reject if this value exceeds 07.115,05.02 =χ . Because 2
5,05.02 χχ >o , reject the hypothesis that
the data are normally distributed
9-137 a) In order to use t statistics in hypothesis testing, we need to assume that the underlying distribution is normal. 1) The parameter of interest is the true mean concentration of suspended solids, µ.
2) H0 : µ = 50 3) H1 : µ < 50 4) Because n >> 30 we can use the normal distribution
z0 = ns
x/µ−
5) Reject H0 if z0 < -1.65 for α = 0.05 6) = 59.87 s = 12.50 n = 60
z0 = 12.660/50.125087.59
=−
7) Because 6.12 > –1.65 fail to reject the null hypothesis. There is insufficient evidence to indicate that the true mean concentration of suspended solids is less than 50 ppm at α = 0.05.
b) P-value = 1)12.6( ≅Φ
Applied Statistics and Probability for Engineers, 5th edition March 15, 2010
9-63
c) We can divide the real line under a standard normal distribution into eight intervals with equal probability. These intervals are [0, 0.32), [0.32, 0.675), [0.675, 1.15), [1.15, ∞) and their negative counterparts. The probability for each interval is p = 1/8 = .125 so the expected cell frequencies are E = np = (60) (0.125) = 7.5. The table of ranges and their corresponding frequencies is completed as follows.
Interval Obs. Frequency. Exp. Frequency. x ≤ 45.50 9 7.5 45.50< x ≤ 51.43 5 7.5 51.43< x ≤ 55.87 7 7.5 55.87< x ≤ 59.87 11 7.5 59.87< x ≤ 63.87 4 7.5 63.87< x ≤ 68.31 9 7.5 68.31< x ≤ 74.24 8 7.5 x ≥ 74.24 6 7.5
The test statistic is:
06.55.7)5.76(
5.7)5.78(
5.7)5.75(
5.7)5.79( 2222
2 =−
+−
++−
+−
= oχ
and we would reject if this value exceeds 07.115,05.02 =χ . Because it does not, we fail to reject the hypothesis
that the data are normally distributed. 9-138 a) In order to use t statistics in hypothesis testing, we need to assume that the underlying distribution
is normal. 1) The parameter of interest is the true mean overall distance for this brand of golf ball, µ.
2) H0 : µ = 270 3) H1 : µ < 270 4) Since n >> 30 we can use the normal distribution
z0 = ns
x/µ−
5) Reject H0 if z0 <- zα where z0.05 =1.65 for α = 0.05 6) = 1.25 s = 0.25 n = 100
z0 = 23.7100/41.13
0.27030.260−=
−
7) Because –7.23 < –1.65 reject the null hypothesis. There is sufficient evidence to indicate that the true mean distance is less than 270 yard at α = 0.05.
b) P-value ≅ 0 c) We can divide the real line under a standard normal distribution into eight intervals with equal probability. These intervals are [0,.32), [0.32, 0.675), [0.675, 1.15), [1.15, ∞) and their negative counterparts. The probability for each interval is p = 1/8 = .125 so the expected cell frequencies are E = np = (100) (0.125) = 12.5. The table of ranges and their corresponding frequencies is completed as follows.
Interval Obs. Frequency. Exp. Frequency. x ≤ 244.88 16 12.5
244.88< x ≤ 251.25 6 12.5 251.25< x ≤ 256.01 17 12.5 256.01< x ≤ 260.30 9 12.5 260.30< x ≤ 264.59 13 12.5 264.59< x ≤ 269.35 8 12.5 269.35< x ≤ 275.72 19 12.5 x ≥ 275.72 12 12.5
The test statistic is:
Applied Statistics and Probability for Engineers, 5th edition March 15, 2010
9-64
125.12)5.1212(
5.12)5.1219(
5.12)5.126(
5.12)5.1216( 2222
2 =−
+−
++−
+−
= oχ
and we would reject if this value exceeds 07.115,05.02 =χ . Because it does, we reject the hypothesis that the
data are normally distributed. 9-139 a) In order to use t statistics in hypothesis testing, we need to assume that the underlying distribution
is normal. 1) The parameter of interest is the true mean coefficient of restitution, µ.
2) H0 : µ = 0.635 3) H1 : µ > 0.635 4) Since n>30 we can use the normal distribution
z0 = ns
x/µ−
5) Reject H0 if z0 > zα where z0.05 =2.33 for α = 0.01 6) = 0.624 s = 0.0131 n = 40
z0 = 31.540/0131.0635.0624.0
−=−
7) Because –5.31< 2.33 fail to reject the null hypothesis. There is insufficient evidence to conclude that the true mean coefficient of restitution is greater than 0.635 at α = 0.01.
b) P-value )31.5(Φ ≅ 1
c) If the lower bound of the CI was above the value 0.635 then we could conclude that the mean coefficient of restitution was greater than 0.635.
9-140
a) In order to use t statistics in hypothesis testing, we need to assume that the underlying distribution is normal. Use the t-test to test the hypothesis that the true mean is 2.5 mg/L. 1) State the parameter of interest: The parameter of interest is the true mean dissolved oxygen level, µ.
2) State the null hypothesis H0 : µ = 2.5 3) State the alternative hypothesis H1 : µ ≠ 2.5 4) Give the statistic
t0 = ns
x/µ−
5) Reject H0 if |t0 | <tα/2,n-1 for α = 0.05 6) Sample statistic = 3.265 s =2.127 n = 20
the t-statistic t0 = ns
x/µ−
7) Draw your conclusion and find the P-value.
b) Assume the data are normally distributed. 1) The parameter of interest is the true mean dissolved oxygen level, µ.
2) H0 : µ = 2.5 3) H1 : µ ≠ 2.5 4) Test statistic
t0 = ns
x/µ−
5) Reject H0 if |t0 | >tα/2,n-1 where tα/2,n-1= t0.025,19b =2.093 for α = 0.05 6) = 3.265 s =2.127 n = 20
Applied Statistics and Probability for Engineers, 5th edition March 15, 2010
9-65
t0 = 608.120/127.25.2265.3=
−
7) Because 1.608 < 2.093 fail to reject the null hypotheses. The true mean is not significantly different from 2.5 mg/L c) The value of 1.608 is found between the columns of 0.05 and 0.1 of Table V. Therefore, 0.1 < P-value < 0.2. Minitab provides a value of 0.124
d) The confidence interval found in exercise 8-81 (b) agrees with the hypothesis test above. The value of 2.5 is within the 95% confidence limits. The confidence interval shows that the interval is quite wide due to the large sample standard deviation value.
260.4270.220127.2093.2265.3
20127.2093.2265.3
19,025.019,025.0
≤≤
+≤≤−
+≤≤−
µ
µ
µnstx
nstx
9-141 a)
1) The parameter of interest is the true mean sugar concentration, µ. 2) H0 : µ = 11.5 3) H1 : µ ≠ 11.5
4) ns
xt/0µ−
=
5) Reject H0 if |t0| > tα/2,n-1 where tα/2,n-1 = 2.093 for α = 0.05 6) 47.11=x , s = 0.022 n=20
10.620/022.05.1147.11
0 −=−
=t
7) Because 6.10 > 2.093 reject the null hypothesis. There is sufficient evidence that the true mean sugar concentration is different from 11.5 at α = 0.05.
From Table V the t0 value in absolute value is greater than the value corresponding to 0.0005 with 19 degrees of freedom. Therefore 2*0.0005 = 0.001 > P-value
b) d = 54.4022.0
|5.114.11||| 0 =−
=−
=σµµ
σδ
Using the OC curve, Chart VII e) for α = 0.05, d = 4.54, and n =20 we find β ≅ 0 and Power ≅ 1.
c) d = 27.2022.0
|5.1145.11||| 0 =−
=−
=σµµ
σδ
Using the OC curve, Chart VII e) for α = 0.05, d = 2.27, and 1 - β > 0.9 (β < 0.1), we find that n should be at least 5. d) 95% two sided confidence interval
⎟⎠
⎞⎜⎝
⎛+≤≤⎟
⎠
⎞⎜⎝
⎛−
nstx
nstx 19,025.019,025.0 µ
48.1146.1120022.0093.247.11
20022.0093.247.11
≤≤
⎟⎠
⎞⎜⎝
⎛+≤≤⎟
⎠
⎞⎜⎝
⎛−
µ
µ
Applied Statistics and Probability for Engineers, 5th edition March 15, 2010
9-66
We conclude that the mean sugar concentration content is not equal to 11.5 because that value is not inside the confidence interval. e) The normality plot below indicates that the normality assumption is reasonable.
Sugar Concentration
Perc
ent
11.5211.5011.4811.4611.4411.4211.40
99
95
90
80
70
60504030
20
10
5
1
Probability Plot of Sugar ConcentrationNormal
9-142
a) ( )
5004.0)75.0)(25.0(225)25.0(22553
1 00
00 −=
−=
−
−=
pnpnpxz
The P-value = Φ(–0.5004) = 0.3084 b) Because the P-value = 0.3084 > α = 0.05 we fail to reject the null hypothesis at the 0.05 level of significance. c) The normal approximation is appropriate because np > 5 and n(p-1) > 5.
d) 2356.022553ˆ ==p
The 95% upper confidence interval is:
2823.0225
)7644.0(2356.065.12356.0
)ˆ1(ˆˆ
≤
+≤
−+≤
p
p
nppzpp α
e) P-value = 2(1 - Φ(0.5004)) = 2(1 - 0.6916) = 0.6168.
9-143 a) 1) The parameter of interest is the true mean percent protein, µ. 2) H0 : µ = 80 3) H1 : µ > 80
4) t0 = ns
x/µ−
5) Reject H0 if t0 > tα,n-1 where t0.05,15 = 1.753 for α = 0.05 6) = 80.68 s = 7.38 n = 16
Applied Statistics and Probability for Engineers, 5th edition March 15, 2010
9-67
t0 = 37.016/38.78068.80
=−
7) Because 0.37 < 1.753 fail to reject the null hypothesis. There is not sufficient evidence to indicate that the true mean percent protein is greater than 80 at α = 0.05.
b) From the normal probability plot, the normality assumption seems reasonable:
percent protein
Perc
ent
10090807060
99
95
90
80
70
60504030
20
10
5
1
Probability Plot of percent proteinNormal
c) From Table V, 0.25 < P-value < 0.4 9-144
a) In order to use the χ2 statistic in hypothesis testing and confidence interval construction, we need to assume that the underlying distribution is normal.
1) The parameter of interest is the true variance of tissue assay, σ2. 2) H0 : σ2 = 0.6 3) H1 : σ2 ≠ 0.6
4) =
5) Reject H0 if where α = 0.01 and =211,995.0χ 2.60 or 2
1,2/20 −> nαχχ where α = 0.01 and
=211,005.0χ 26.76 for n = 12
6) n = 12, s = 0.758
= 53.106.0)758.0(11)1( 2
2
2
==−σsn
7) Because 2.6 <10.53 < 26.76 we fail to reject H0. There is not sufficient evidence to conclude the true variance of tissue assay is significantly different from 0.6 at α = 0.01.
b) 0.1 < P-value/2 < 0.5, so that 0.2 < P-value < 1 c) 99% confidence interval for σ, first find the confidence interval for σ2
For α = 0.05 and n = 12, =211,995.0χ 2.60 and =2
11,005.0χ 26.76
60.2)758.0(11
76.26)758.0(11 2
22
≤≤σ
0.236 ≤ σ2 ≤ 2.43 0.486 ≤ σ ≤ 1.559
Applied Statistics and Probability for Engineers, 5th edition March 15, 2010
9-68
Because 0.6 falls within the 99% confidence bound there is not sufficient evidence to conclude that the population variance differs from 0.6
9-145
a) In order to use the χ2 statistic in hypothesis testing and confidence interval construction, we need to assume that the underlying distribution is normal.
1) The parameter of interest is the true variance of the ratio between the numbers of symmetrical and total synapses, σ2.
2) H0 : σ2 = 0.02 3) H1 : σ2 ≠ 0.02
4) =
5) Reject H0 if where α = 0.05 and 79.16230,975.0 =χ or 2
1,2/20 −> nαχχ where α = 0.05
and =230,025.0χ 46.98 for n = 31
6) n = 31, s = 0.198
= 81.5802.0)198.0(30)1( 2
2
2
==−
σsn
7) Because 58.81 > 46.98 reject H0. The true variance of the ratio between the numbers of symmetrical and total synapses is significantly different from 0.02 at α = 0.05.
b) P-value/2 < 0.005 so that P-value < 0.01
9-146 a)
1) The parameter of interest is the true mean of cut-on wave length, µ. 2) H0 : µ = 6.5 3) H1 : µ ≠ 6.5
4) ns
xt/0µ−
=
5) Reject H0 if |t0| > tα/2,n-1. Since no value of α is given, we will assume that α = 0.05. So tα/2,n-1 = 2.228 6) 55.6=x , s = 0.35 n=11
47.011/35.05.655.6
0 =−
=t
7) Because 0.47< 2.228, we fail to reject the null hypothesis. There is not sufficient evidence to conclude that the true mean of cut-on wave length differs from 6.5 at α = 0.05.
b) From Table V the t0 value is found between the values of 0.25 and 0.4 with 10 degrees of freedom, so 0.5 < P-value
< 0.8
c) d = 71.035.0
|5.625.6||| 0 =−
=−
=σµµ
σδ
Using the OC curve, Chart VII e) for α = 0.05, d = 0.71, and 1 - β > 0.95 (β < 0.05). We find that n should be at least 30.
d) d = 28.135.0
|5.695.6||| 0 =−
=−
=σµµ
σδ
Using the OC curve, Chart VII e) for α = 0.05, n =11, d = 1.28, we find β ≈ 0.1 9-147 a) 1) the parameter of interest is the variance of fatty acid measurements, σ2 2) H0 : σ2 = 1.0 3) H1 : σ2 ≠ 1.0
Applied Statistics and Probability for Engineers, 5th edition March 15, 2010
9-69
4) The test statistic is:
5) Reject H0 if 41.025,995.0
20 =< χχ or reject H0 if 75.162
5,005.020 => χχ for α=0.01 and n = 6
6) n = 6, s = 0.319
509.01
)319.0(52
220 ==χ
P-value: 0.005 < P-value/2 < 0.01 so that 0.01 < P-value< 0.02
7) Because 0.509 > 0.41 fail to reject the null hypothesis at α = 0.01. There is insufficient evidence to conclude that the variance differs from 1.0.
b) 1) the parameter of interest is the variance of fatty acid measurements, σ2 (now n=51)
2) H0 : σ2 = 1.0 3) H1 : σ2 ≠ 1.0
4) The test statistic is:
5) Reject H0 if 99.27250,995.0
20 =< χχ or reject H0 if 49.792
50,005.020 => χχ for α=0.01 and n = 51
6) n = 51, s = 0.319
09.51
)319.0(502
220 ==χ
P-value/2 < 0.005 so that P-value < 0.01
7) Because 5.09 < 27.99 reject the null hypothesis. There is sufficient evidence to conclude that the variance is not equal to 1.0 at α = 0.01.
c) The sample size changes the conclusion that is drawn. With a small sample size we fail to reject the null hypothesis. However, a larger sample size allows us to conclude the null hypothesis is false.
9-148 a) 1) the parameter of interest is the standard deviation, σ 2) H0 : σ2 = 400 3) H1 : σ2 < 400
4) The test statistic is:
5) No value of α is given, so that no critical value is given. We will calculate the P-value. 6) n = 10, s = 15.7
P-value =
7) The P-value is greater than a common significance level α (such as 0.05). Therefore, we fail to reject the null hypothesis. There is insufficient evidence to support the claim that the standard deviation is less than 20 microamps.
b) 7) n = 51, s = 20
P-value =
The P-value is less than 0.05. Therefore we reject the null hypothesis and conclude that the standard deviation is significantly less than 20 microamps.
Applied Statistics and Probability for Engineers, 5th edition March 15, 2010
9-70
c) Increasing the sample size increases the test statistic and therefore decreases the P-value, providing more evidence against the null hypothesis.
Applied Statistics and Probability for Engineers, 5th edition March 15, 2010
9-71
Mind Expanding Exercises 9-149 a) H0: µ = µ0 H1 µ ≠ µ0 P(Z > zε ) = ε and P(Z < -zα-ε) = (α – ε). Therefore P (Z > zε or Z < -zα-ε) = (α – ε) + ε = α b) β = P(-zα-ε < Ζ < zε | µ0 + δ) 9-150 a) Reject H0 if z0 < -zα-ε or z0 > zε
)|//
()| //
( 000
000 µµ
σµ
σµ
µµσ
µσ
µ=
−>
−+==
−−<
−
nX
nXP
nX
nXP P
αεεαεεαεεα
=−−+−=
Φ−+−Φ=>+−< −−
))1(1())(()(1)()()( 00 zzzzPzzP
b) β = P(zε ≤ X ≤ zε when d+= 01 µµ )
or β µ µ δα ε ε= − < < = +−P z Z z( | )0 1 0
β µ µ δα εµ
σε
α εδ
σε
δ
σ
εδ
σα ε
δ
σ
= − < < = +
= − − < < −
= − − − −
−−
−
−
P z z
P z Z z
z z
x
n
n n
n n
( | )
( )
( ) ( )
/
/ /
/ /
02
2 2
2 2
1 0
Φ Φ
9-151 1) The parameter of interest is the true mean number of open circuits, λ. 2) H0 : λ = 2 3) H1 : λ > 2 4) Since n>30 we can use the normal distribution
z0 = n
X/λλ−
5) Reject H0 if z0 > zα where z0.05 =1.65 for α = 0.05 6) x = 1038/500=2.076 n = 500
z0 = 202.1500/22076.2=
−
7) Because 1.202 < 1.65 fail to reject the null hypothesis. There is insufficient evidence to indicate that the true mean number of open circuits is greater than 2 at α = 0.01
9-152 a) 1) The parameter of interest is the true standard deviation of the golf ball distance σ. 2) H0: σ = 10 3) H1: σ < 10 4) Because n > 30 we can use the normal distribution
z0 = )2/(2
0
0
n
S
σ
σ−
5) Reject H0 if z0 < zα where z0.05 =-1.65 for α=0.05 6) s = 13.41 n = 100
z0 = 82.4)200/(10
1041.132
=−
7) Because 4.82 > -1.65 fail to reject the null hypothesis. There is insufficient evidence to conclude that the true standard deviation is less than 10 at α = 0.05
Applied Statistics and Probability for Engineers, 5th edition March 15, 2010
9-72
b) 95% percentile: σµθ 645.1+=
95% percentile estimator: SX 645.1ˆ +=θ From the independence
)2/(645.1/)ˆ( 222 nnSE σσθ +≅ The statistic S can be used as an estimator for σ in the standard error formula.
c) 1) The parameter of interest is the true 95th percentile of the golf ball distance θ. 2) H0: θ = 285 3) H1: θ < 285 4) Since n > 30 we can use the normal distribution
z0 = )ˆ(ˆ
ˆ0
θ
θθ
ES−
5) Reject H0 if z0 < -1.65 for α = 0.05
6) θ̂ = 282.36 , s = 13.41, n = 100
z0 = 283.1200/41.13645.1100/41.13
28536.282222
−=+
−
7) Because -1.283 > -1.65 fail to reject the null hypothesis. There is not sufficient evidence to conclude that the true θ is less than 285 at α = 0.05
9-153 1) The parameter of interest is the parameter of an exponential distribution, λ. 2) H0 : λ = λ0 3) H1 : λ ≠ λ0 4) test statistic
∑
∑
=
=
−=
n
ii
n
ii
X
X
1
012
0
2
2
λ
λλχ
5) Reject H0 if 2
2,2/20 naχχ > or 2
2,2/120 na−< χχ for α = 0.05
6) Compute ∑=
n
iiX
1
2λ and plug into
∑
∑
=
=
−=
n
ii
n
ii
X
X
1
012
0
2
2
λ
λλχ
7) Draw Conclusions
The one-sided hypotheses below can also be tested with the derived test statistic as follows: 1) H0 : λ = λ0 H1 : λ > λ0
Reject H0 if 22,
20 naχχ >
2) H0 : λ = λ0 H1 : λ < λ0
Reject H0 if 22,
20 naχχ <