Isotape Adhesive Tapes for Electrical Insulation Tapes for Electrical Insulation 3 ... Silk acetate 0.180 0.240 RT white/black 3.2 60 15 2000. ... and electrical properties

Isotape® Adhesive Tapes for Electrical Insulation

Adhesive Tapes for Electrical Insulation 3

For every application Von Roll offers an appropriate solution. The following tables show our wide selection:

*colors: yellow, red, blue, black, green, white, transparent

Self-Adhesive Products

Insulation class 130°C (B)

Product Backing

Backing thickness (mm)

Total thickness (mm)

Adhesive type Color

Adhesion to steel(N/cm)

Tensile strength(N/cm)

Elongation at break (%)

Breakdownvoltage (V EFF)

Polyester films

Intertape® 51587

Polyester

0.023 0.056 RT black/yellow 5.5 44 100 5000

Intertape® 51588

0.023 0.056 RT clear 5.5 44 100 5000

Intertape® 51594

0.025 0.051 RT yellow 4.9 44 100 5000

Intertape® 54108

0.023 0.060 RT beige 5.5 44 100 5000

Isotape® 50501(1)(2)

0.025 0.055 AT 7 colors* 4.4 36 80 5000

Intertape® 51589

0.025 0.056 A yellow/clear 3.85 44 100 5000

Intertape® 54113

0.023 0.060 A yellow/clear 4.9 44 100 5000

Isotape® 51350 PV3(4)

0.025 0.060 AT FR 7 colors* 4.0 44 100 5000

Isotape® 51350 PV3-2(4)

0.050 0.090 AT FR 7 colors* 3.72 86 100 6500

Polyester laminates

Intertape® 4426

Polyester/ Rope Fiber

0.100 0.165 RT white/black 6.5 80 2 5500

Intertape® 51596

Polyester/ Non-woven

0.090 0.114 RT white/black 6.6 55 60 5000

Polyester reinforced glass filament

Intertape® 51599 PV1


0.127 0.178 RT beige 6.0 600 5 5000

Glass cloths

Intertape® 4616

Glasscloth

0.130 0.180 RT black/white 5.5 310 3 3000

Intertape® 461FR(1)

0.125 0.180 RT black 4.4 310 3 3000

Insulation class 105°C (A)

Product Backing

Backing thickness mm

Total thickness mm

Adhesive type Colour





Polyester films

Isotape® 4561PV3(4)

Silk acetate 0.180 0.240 RT white/black 3.2 60 15 2000

4 Adhesive Tapes for Electrical Insulation

Product Backing

Backing thickness(mm)

Total thickness(mm)

Adhesive type Color



Elongationat break (%)


Speciality

Isotape® 4138 (0)

Polypropylene 0.040 0.065 A clear 3.2 48 100 4000

Intertape® 4564

Polyester fleece

0.061 0.165 AT (z) white 3.6 30 35 500/4600

Intertape® 4560

Silk acetate 0.152 0.180 RT black/white

5 70 15 2000

Isotape® 4560 PV3

Silk acetate 0.180 0.240 RT black/white

5 60 15 2500

Isotape® 51600 PV3 (0)

Polyester cloth 0.125 0.180 AT black/white

10 120 10 1000

*Colors: yellow, red, blue, black, green, white, transparent

Insulation class 155°C (F)

Product Backing



Adhesive type Color





Polyester laminates



0.170 0.230 AT white 3.8 55 60 6500

Intertape® 51595


0.090 0.114 A white 5.5 52 30 4500


Intertape® 4238

Polyesterreinforcedglassfilament

0.165 0.190 AT clear 4.8 657 5 6000

Intertape® 51597

0.140 0.165 AT clear 4.4 438 5 5000

Glass cloths

Isotape® 4627 (2)

Glass cloth

0.130 0.180 RT white 5.5 310 5 3000

Intertape® 4617

0.130 0.180 AT white 4.4 350 3 3000


0.125 0.180 AT white 3.4 240 5 2500

Intertape® 54562

0.130 0.210 AT white 4.8 345 5 3000

Speciality


Nomex®/ polyester

0.050/ 0.150

0.270 AT FR white 4.32 196 80 8500


Nomex® 0.050 0.090 AT white 4.8 32 10 2000

Polyimide films

Intertape® 51579

Polyimide 0.025 0.046 AT amber 3.8 52 60 7000


(0) Tape not UL approved. (1) Passes UL 510 Flame retardancy. (2) Tapes UL approved under their own supplier numbers, available upon request.(z) Zone coated. (4) UL Approved under UL file E315249 or E315208. (R) Natural rubber. (RT) Thermosetting rubber. (A) Acrylic. (AT) Thermosetting acrylic. (AT FR) Thermosetting acrylic Flame Retardant. (Si) Silicone. (SiT) Thermosetting silicone Nomex® and Kapton®

are Trade names of Dupont de Nemours.

Insulation class 180°C (H)

Product Backing



Adhesive type Color





Glass cloths

Isotape® 4638 PV3

Glass cloth 0.120 0.190 Si white 3.75 280 5 2000

Speciality


Teflon® 0.050 0.095 Si beige 3.6 40 140 9500

Polyimide films

Intert ape® 4118 (1)

Kapton® 0.025 0.063 SiT amber 2.8 52 60 7000


Polyimide 0.025 0.064 Si amber 2.3 49 60 6500

Intertape® 4429 (1)

Polyimide 0.050 0.089 Si amber 2.2 114 60 11000

Insulation class 200°C (C)

Product Backing



Adhesive type Color





Glass cloths

Intertape® 4618 (1)

Glass cloth 0.130 0.180 SiT white 4.4 325 3 3000

We are certified for UL, ISO 9001 and ISO 14001:UL approbation file E 20780 & CSA certifiedLR 94980 for Intertape® products UL approvedE315208 & E315249 for isotape® products marked (4).Not UL approved: Isotape® 4138, 4560PV3, 51600PV3.

Insulation class 155°C (F)

Product Backing



Adhesive type Color





Polyester laminates



0.170 0.230 AT white 3.8 55 60 6500

Intertape® 51595


0.090 0.114 A white 5.5 52 30 4500


Intertape® 4238

Polyesterreinforcedglassfilament

0.165 0.190 AT clear 4.8 657 5 6000

Intertape® 51597

0.140 0.165 AT clear 4.4 438 5 5000

Glass cloths

Isotape® 4627 (2)

Glass cloth

0.130 0.180 RT white 5.5 310 5 3000

Intertape® 4617

0.130 0.180 AT white 4.4 350 3 3000


0.125 0.180 AT white 3.4 240 5 2500

Intertape® 54562

0.130 0.210 AT white 4.8 345 5 3000

Speciality


Nomex®/ polyester

0.050/ 0.150

0.270 AT FR white 4.32 196 80 8500


Nomex® 0.050 0.090 AT white 4.8 32 10 2000

Polyimide films

Intertape® 51579

Polyimide 0.025 0.046 AT amber 3.8 52 60 7000

6 Adhesive Tapes for Electrical Insulation

General Specifications

Adhesive type

AcrylicAcrylic adhesive resists to varnish solvents even if not fully cured. The acrylic offers a high ageing resistance until 155°C in use.

Natural rubber adhesiveNatural rubber adhesive requires lowest tem-perature cure cycle to reach its maximum performance but is limited at 130°C for continu-ous use.

Silicone adhesiveSilicone adhesive is used when extremely high temperature is required and up to 180°C. The heat cycle for this adhesive is higher and longer.

ThermosettingHaving the property to perform in a higher bonding when heated or cured.

Flame retardant The adhesive complies with non burning properties.

Adhesive masses

A AcrylicAT Thermosetting AcrylicAT FR Thermosetting Acrylic Flame Retardant R Natural RubberRT Thermosetting Natural RubberSi SiliconeSiT Thermosetting Silicone

Thermosetting cycles

For thermosetting acrylic andrubber adhesivesat 120°C (250°F): 3 hoursat 130°C (275°F): 2 hoursat 150°C (300°F): 1 hour

For thermosetting silicone adhesivesat 260°C (500°F): 2 hours 24 hours recommended for maximum resistance to solvent

Storage conditionsFor the best shelf life, storage temperature should be between 15°C to 25°C Relative Humidity: 50 % (± 30 %)

Slitting toleranceFilms ± 0,4 mm ( ±1/64”)Cloths ± 0,4 mm ( ±1/64”)Laminates ± 0,4 mm ( ±1/64”)Length > 100 m ± 0,8 mm ( ±1/32”)

Temperature rating

Each adhesive tape is allowed to be used at continuous temperature level as shown in this table: Data are for use at 20 000 hours at the temperature continuously.

Insulation class

Temperature rating

Y 90°C

A 105°C

B 130°C

F 155°C

H 180°C

C 200°C


The Appropriate Solution

Polyimide filmsAn excellent choice for high temperature insulation and processing applications thanks to:

» very high heat resistance (between 120°C and 350° for short periods)

» high dielectric strength

Examples: Intertape® 4118, Isotape® 4428 PV3, Intertape® 4429, Intertape® 51579

Speciality

» The unique characteristics of these tapes make them extremely suitable for high voltage insulation applications.

» Zone coating (4564) allows complete impregnation of the varnish.

» An innovative backing (51600 PV3) provides unique properties to fulfil application requirements of new generations of coils.

Polyester reinforced glass filamentThese tapes are mainly compatible with insulation oil for immersed transformers. An excellent choice for heavy duty bundling insulation thanks to:

» high tensile strength with glass filament

» high dielectric properties from the polyester film

Examples: Intertape® 4238, Intertape® 51597, Intertape® 51599 PV1

Glass cloths

» Flexibility and conformability are key features of this product group.

» High heat resistance and tensile strength of the glass cloth fulfil many electrical insulation application requirements.

Examples: Intertape® 461FR, Intertape® 4616, Intertape® 4617, Intertape® 4618, Isotape® 4627, Isotape® 4637PV3, Isotape® 4638 PV3, Intertape® 54562

Polyester laminatesBoth types of polyester laminates offer unique properties.

» Paper/Polyester offers bulk, stiffness and is hand tearable.

» Polyester/Non-woven offers excellent puncture resistance and conformability.

» Higher temperature performance with acrylic adhesives.

Examples: Intertape® 4426, Isotape® 51044PV3 Intertape® 51595, Intertape® 51596, Isotape® 54354

Polyester films

» Excellent combination of qualities: high insulation properties and high dielectric strength at low thickness (25 μ).

» Acrylic adhesives enhance these films by giving the products good chemical and solvent resistance.

» Some polyester films are UL Flame Retardant.

Examples: Isotape® 50501, Intertape® 51587, Intertape® 51588, Intertape® 51594, Intertape® 54108, Intertape® 54113, Isotape® 51350PV3, Isotape® 51350PV3-2, Intertape® 51589

All

info

rmat

ion

in t

his

doc

umen

t su

bje

ct t

o th

e p

rod

uct

liab

ility

cla

use

as p

ublis

hed

on

the

web

site

ww

w.v

onro

ll.co

m u

nder

Gen

eral

Ter

ms

and

Co

nd

itio

ns.

Von Roll is the sole full-range supplier of materials and systems for the insulation of electrical machines as well as high-performance products for various high-tech industries.

We Enable Energy

MicaAll materials related to high-voltage insulation. Von Roll’s commitment to mica starts with mining and ends with finished tapes.

WiresInsulated round, flat and Litz wires for high-voltage, low-voltage and electronic applica-tions.

CablesMica tapes for fire-resistant cables. Von Roll provides a wide range of products that are ideally suited to all commonly used standards.

LiquidsImpregnation resins for high- and low-voltage, potting resins, casting resins, as well as encapsulating and conformal coatings.

CompositesEngineered materials made from a resin and a support structure with distinct physical, thermal and electrical properties. They can be molded, machined or semi-finished.

FlexiblesInsulating flexible materials for low-voltage applications such as flexible laminates and adhesive tapes.

Ballistic ProtectionHigh-quality systems for armored defensebased on thermoset / thermoplastic productsin single-use or tailored combinations.

Water and wastewater treatmentVon Roll BHU provides solutions for process engineering tasks in the field of water and wastewater management.

TestingVon Roll provides electrical, thermal and mechanical testing of individual materials as well as complete insulating systems.

TrainingVon Roll Corporate University provides a training program in high- and low-voltage insulation for its customers.

Please contact us or visit our website www.vonroll.com for further information:

About usWe Enable Energy – As one of Switzerland’s longest-established industrial companies, Von Roll focuses onproducts and systems for electrical power generation, power transmission and industrial applications. Von Roll’sbusiness portfolio is divided into the following businesses: Von Roll Insulation offers electrical insulation products,systems and services for generators, high- and low-voltage motors, transformers and other applications.Von Roll Composites produces composite materials and parts for a variety of industrial equipment. Other activitiesof Von Roll include solutions for process engineering tasks in the field of water and wastewater management.

Customer Service :

Europe

Von Roll Schweiz AGPasswangstrasse 204226 BreitenbachSwitzerlandP +41 61 785 51 11F +41 61 785 51 88

Asia/Pacific

Von Roll Asia Pte Ltd.6 Serangoon North Avenue 5 #03-01Singapore 554910SingaporeP +65 6556 4788F +65 6556 4959

North- and South America

Von Roll USA, Inc.200 Von Roll DriveSchenectady, NY 12306USAP +1 518-344-7100F +1 518-344-7288

Von Roll do Brasil Ltda.Av. Aruana, 20106410-010 Sao PaoloBrazilP +55 11 4208 5995F +55 11 4193 6789

Documents

Isotape Adhesive Tapes for Electrical Insulation Tapes for Electrical Insulation 3 ... Silk acetate 0.180 0.240 RT white/black 3.2 60 15 2000. ... and electrical properties