S I 1 3 . 0 5 . 2 0 1 3

Isola Polymer Roofing Shingle TyriPolymer bitumen shingles for pitch roofs

Isola Roofing Shingles are produced fromthermoplastic polymer bitumen with areinforcement of glass fiber. It is produced in 6different patterns and many colors. The glassfiber is coated with layers of bitumen on bothsides. The back side is coated with water repellentsand on the bottom part and with a PE foil on theupper side. The top side is protected with coloredmineral granules. Unique connected adhesiveareas on the top side provide an immediate andenduring secure adhesion of the tabs.

Isola Roofing Shingles can be used on pitchedroofs for new and renovated roofs. On newconstructions it can be mounted down to a 15°angle. In harsh environments, and in angelsbetween 15° - 18° a under layer shall be used. IsolaIsokraft is recommended. Isola SchalungsbahnXtra can be considered used in less harshenvironments. The roof angle shall be more than18° when Isola Roofing Shingels are used on topof existing Shigels.

Isola Roofing Shingles can be laid directly onsolid surface like OSB, playwood or woodenboards.shingles can be installed only on cold orventilated roof construction. Mixing shingles withdifferent production date can provide "colour"difference. Adhesive fields are activated to thetemperature down to 5°C. for more informationplease see laying instruction.

Shingles must be stored in cool and dryconditions. Do not store in direct sunligth. Do notstore pallets on top of each other. 

Article number Color505001 Gray structure505009 Antic brown505025 Russet red

Isola Polymer Roofing Shingle TyriPolymer bitumen shingles for pitch roofs

 

 

Essential characteristics Method Performance

Flow resistance of elevatedtemperature at 150°C (mm)

EN 110 0

Resistance to blistering, 90°C EN 544 No blisters

Adhesive Of The Protective Finishing(g )

EN 544 0,3

Driving rain tightness NT Build 421 Tight at 350 Pa

 

 

 

Declared performance EN 544

Essential characteristics Value

External Fire Performance Broof (t1, t2, t3)

Reaction To Fire Class E

Mass of bitumen (g/m2) 1300

Tensile Strength:Maximum Tensile Force Width (N/50mm)                                       Maximum tensile force height (N/50mm)Nail Shank / Tear Resistance (N)

 890 ± 200690 ± 200120 ±   20

Dimensional tolerance ± 3

Durability Of Mechanical Resistance Pass

Durability:Flow Resistance Of ElevatedTemperature at 90 °C (mm)Adhesive Of The ProtectiveFinishing (g )Water Absorption (%)

< 20,30,3

Dangerous substances None (Note 1 and 2)

Note 1: CPR art. 25 REACH.Note 2: This product does not contain asbestos or tar constituents

Isola Polymer Roofing Shingle TyriPolymer bitumen shingles for pitch roofs

 

Properties Value

Dimension: 1000 x 341/306 mm

Netto height of tabs: 128 mm

Double overlaping: 50 mm

Material consumption: 7,8 pcs/m²

Weight: 10 kg/m², 28,3 kg/packet, ca. 1 129 kg/pallet

Shingle plates per packet: 22 pcs

Covered roof area: 2,82 m²/packet, 109,98 m2/pallet

Packet on one pallets: 39 pcs