Upload
hoangnga
View
247
Download
1
Embed Size (px)
Citation preview
ISO Update, Supplement to ISO Focus -- December 2016 1
International Standards in process
An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an Interna-tional Standard takes the form of a committee draft (CD) - this is cir-culated for study within an ISO technical committee. When consensus has been reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Standard (DIS). The DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft International Standard (FDIS), the approval criteria remaining the same.
CD registered
Period from 01 November to 30 November 2016
These documents are currently under consideration in the technical committee.
They have been registred at the Central Secretariat.
COPOLCO Committee on consumer policy
ISO/IEC CD Guide 41
Packaging — Recommendations for address-ing consumer needs
TC 8 Ships and marine technology
ISO/CD 19898 Ships and marine technology — Means of recovery of persons
TC 17 Steel
ISO/DTS 7705 Guidelines for specifying Charpy V-notch im-pact prescriptions in steel specifications
TC 22 Road vehicles
ISO/CD 19380 Heavy commercial vehicles and buses — Cen-tre of gravity measurements — Tilt-table, axle lift, and stable pendulum test methods
TC 23 Tractors and machinery for agriculture and forestry
ISO/CD 13772 Forestry machinery — Portable chain-saws — Non-manually actuated chain brake performance
TC 28 Petroleum products and related prod-ucts of synthetic or biological origin
ISO/DTR 19441
Petroleum products — Density vs. tempera-ture relationships of current fuels, biofuels and biofuel components
TC 29 Small tools
ISO/CD 6787 Assembly tools for screws and nuts — Adjust-able wrenches
ISO/CD 10102 Assembly tools for screws and nuts — Double-headed open-ended engineers' wrenches — Length of wrenches and thickness of the heads
ISO/CD 10103 Assembly tools for screws and nuts — Double-headed, flat and offset, box wrenches — Length of wrenches and thickness of the heads
ISO/CD 10104 Assembly tools for screws and nuts — Double-headed, deep offset and modified offset, box wrenches — Length of wrenches and thickness of the heads
TC 38 Textiles
ISO/CD 21326 Textiles — Testing methods for efficiency against house dust mite
ISO/CD 20754 Textiles — Man-made fibres — Determination of shape factors in cross section
TC 43 Acoustics
ISO/CD 11654 Acoustics — Sound absorbers for use in build-ings — Rating of sound absorption
TC 45 Rubber and rubber products
ISO/CD 7781 Styrene-butadiene rubber, raw — Determina-tion of soap and organic-acid content
TC 58 Gas cylinders
ISO 11515:2013/CD Amd 1
Gas cylinders — Refillable composite rein-forced tubes of water capacity between 450 L and 3000 L — Design, construction and testing — Amendment 1
ISO/DTR 19811
Gas cylinders — Service life testing for cylin-ders and tubes of composite construction
TC 68 Financial services
ISO/DTR 21941
Financial services — Third party payment service providers
TC 69 Applications of statistical methods
ISO/CD 7870-7 Control charts — Part 7: Multivariate control charts
TC 70 Internal combustion engines
ISO/CD 8178-6 Reciprocating internal combustion engines — Exhaust emission measurement — Part 6: Report of measuring results and test
TC 85 Nuclear energy, nuclear technologies, and radiological protection
ISO/CD 20047 Clinical dosimetry - Dose determination of Gamma Knife radio surgery facilities
TC 92 Fire safety
ISO/CD 21925-1
Fire resistance tests — Fire dampers for air distribution systems — Part 1: Mechanical dampers
TC 94 Personal safety -- Protective clothing and equipment
ISO/CD 20320 Protective clothing for use in Snowboarding — Wrist Protectors — Requirements and test methods
ISO/CD 16073 Wildland firefighting personal protective equip-ment — Requirements and test methods
TC 117 Fans
ISO/CD 12759-4
Fans — Efficiency classification for fans — Part 4: Driven fans at maximum operating speed
TC 130 Graphic technology
ISO/CD 18621-31
Graphic technology — Image quality evaluation methods for printed matter — Part 31: Evalu-ation of the perceived resolution of printing systems with the contrast –resolution chart
ISO/CD 21632 Graphic technology — Guidelines to determine the energy consumption of digital printing de-vices including transitional and related modes
TC 156 Corrosion of metals and alloys
2 ISO Update, Supplement to ISO Focus -- December 2016
ISO/CD 21153 Corrosion of metals and alloys — Measure-ment of environmentally assisted small crack growth rate
TC 159 Ergonomics
ISO/CD 27501 The human-centred organization — Manage-ment of ergonomic processes
TC 172 Optics and photonics
ISO/CD 9211-5 Optics and photonics — Optical coatings — Part 5: Antireflecting coatings
ISO/CD 9211-6 Optics and photonics — Optical coatings — Part 6: Reflecting coatings
ISO/CD 9211-7 Optics and photonics — Optical coatings — Part 7: Neutral beam splitting coatings
ISO/CD 9211-8 Optics and photonics — Optical coatings — Part 8: Coatings used for laser optics
TC 184 Automation systems and integration
ISO/CD 10303-62
Industrial automation systems and integration — Equivalence validation of product data — Part 62:
TC 185 Safety devices for protection against excessive pressure
ISO/CD 4126-3 Safety devices for protection against excessive pressure — Part 3: Safety valves and bursting disc safety devices in combination
TC 190 Soil quality
ISO/CD 16133 Soil quality — Guidance on the establishment and maintenance of monitoring programmes
TC 194 Biological and clinical evaluation of medical devices
ISO/CD 10993-9
Biological evaluation of medical devices — Part 9: Framework for identification and quantifica-tion of potential degradation products
ISO/CD 10993-15
Biological evaluation of medical devices — Part 15: Identification and quantification of degrada-tion products from metals and alloys
TC 198 Sterilization of health care products
ISO/CD 11607-1
Packaging for terminally sterilized medical devices — Part 1: Requirements for materials, sterile barrier systems and packaging systems
ISO/CD 11607-2
Packaging for terminally sterilized medical devices — Part 2: Validation requirements for forming, sealing and assembly processes
TC 204 Intelligent transport systems
ISO/DTR 10992-2
Intelligent transport systems — Use of nomad-ic and portable devices to support ITS service and multimedia provision in vehicles — Part 2: Definition and use cases for mobile service convergence
ISO/CD 15638-21
Intelligent transport systems — Framework for cooperative telematics applications for regulated commercial freight vehicles (TARV) — Part 21: Monitoring of regulated vehicles using roadside sensors and data collected from the vehicle for enforcement and other purposes
ISO/CD 19297 Intelligent transport systems - Shareable geo-spatial database for ITS applications
ISO/DTS 21219-7
Intelligent transport systems — Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) — Part 7: Location referencing container (TPEG2-LOC)
ISO/DTS 21219-22
Intelligent transport systems — Traffic and travel information (TTI) via transport protocol expert group, generation 2 (TPEG2) — Part 22: OpenLR location referencing (TPEG2-OLR)
TC 207 Environmental management
ISO/CD 14008 Monetary valuation of environmental impacts from specific emissions and use ofnatural resources — Principles, requirements and guidelines
TC 213 Dimensional and geometrical product specifications and verification
ISO/DTR 23605
Technical product specification (TPS) — Ap-plication guidance — International model for national implementation
TC 219 Floor coverings
ISO/CD 24342 Resilient and textile floor-coverings — Deter-mination of side length, edge straightness and squareness of tiles
TC 249 Traditional chinese medicine
ISO/CD 19617 Traditional Chinese medicine — General requirements for the manufacturing process of natural products used in and as traditional Chinese medicine (TCM)
ISO/CD 21371 Traditional Chinese medicine — Labelling requirements of products intended for oral or topical use in and as traditional Chinese medicine (TCM)
TC 268 Sustainable cities and communities
ISO/CD 37120 Sustainable development of communities — Indicators for city services and quality of life
ISO/CD 37153 Smart communitiy infrastructures — Maturity model for assessment and improvement
TC 282 Water reuse
ISO/CD 20468-1
Guidelines for performance evaluation of treat-ment technologies for water re-use systems — Part 1: General
TC 292 Security and resilience
ISO/CD 22326 Security and resilience — Emergency manage-ment — Guidelines for monitoring facilities with identified hazards
ISO/CD 22395 Security and resilience — Community resil-ience — Guidelines for supporting community response to vulnerable people
TC 301 Energy management and energy savings
ISO/CD 50046 General quantification methods for ex ante or expected energy savings
JTC 1 Information technology
ISO/IEC PDTR 11801-9905
Information technology — Generic cabling systems for customer premises — Part 9905: Guidelines for the use of installed cabling to support 25GBASE-T application
ISO/IEC CD 19896-1
Information technology — Security techniques — Competence requirements for information security testers and evaluators — Part 1: Intro-duction, concepts and general requirements
ISO/IEC 13818-1:2015/PDAM 9
Information technology — Generic coding of moving pictures and associated audio infor-mation — Part 1: Systems — Amendment 9: Ultra-Low Latency and 4k and higher resolution support for transport of JPEG 2000 video
ISO/IEC 14492:2001/PDAM 4
Information technology — Lossy/lossless cod-ing of bi-level images — Amendment 4
ISO/IEC 14496-15/PDAM 1
Information technology — Coding of audio-visual objects — Part 15: Carriage of network abstraction layer (NAL) unit structured video in the ISO base media file format — Amendment 1: Handling of unspecified NAL unit types and other improvements
ISO Update, Supplement to ISO Focus -- December 2016 3
ISO/IEC 23003-1:2007/PDAM 4
Information technology — MPEG audio tech-nologies — Part 1: MPEG Surround — Amend-ment 4: Reference software for MPEG surround extension for 3D audio
ISO/IEC 23008-2/PDAM 2
Information technology — High efficiency coding and media delivery in heterogeneous environments — Part 2: High efficiency video coding — Amendment 2: Main 10 still picture profile
ISO/IEC PDTR 23008-14
Information technology — High efficiency coding and media delivery in heterogeneous environments — Part 14: Conversion and cod-ing practices for HDR/WCG Y'CbCr 4:2:0 video with PQ transfer characteristics
ISO/IEC CD 20027
Biometrics interoperability profiles — Best practices for slap tenprint captures
ISO/IEC 30134-2:2016/PDAM 1
Information technology — Data centres — Key performance indicators — Part 2: Power usage effectiveness (PUE) — Amendment 1
ISO/IEC 30134-3:2016/PDAM 1
Information technology — Data centres — Key performance indicators — Part 3: Renewable energy factor (REF) — Amendment 1
DIS circulated
Period from 01 November to 30 November 2016
These documents have obtained substantial support within the ap-propriate ISO technical committee.
They have been submitted to the ISO member bodies for voting by the date shown.
* Available in English only
Vote terminates
TC 4 Rolling bearings
ISO 76:2006/DAmd 1
* Rolling bearings — Static load ratings — Amendment 1
2017-02-14
TC 8 Ships and marine technology
ISO/DIS 21070 * Ships and marine technology — Marine environment protection — Management and handling of shipboard garbage
2017-02-15
(Revision of ISO 21070:2011)
ISO/DIS 19636 * Ships and marine technology — General requirements for incli-nometers used for determination of trim and list of LNG carriers
2017-01-30
TC 10 Technical product documentation
ISO/DIS 129-5 * Technical product documenta-tion (TPD) — Presentation of di-mensions and tolerances — Part 5: Dimensioning of structural metal work
ISO/DIS 6413 * Technical product documenta-tion — Representation of splines and serrations
2017-01-25
(Revision of ISO 6413:1988)
TC 17 Steel
ISO/DIS 4829-1
* Steels — Determination of total silicon contents — Reduced molybdosilicate spectrophoto-metric method — Part 1: Silicon contents between 0,05 % and 1,0 %
2017-02-21
(Revision of ISO 4829-1:1986)
ISO/DIS 19203 * Hot-dip galvanized and zinc-aluminium coated high tensile steel wire for bridge cables — Specifications
2017-02-17
TC 20 Aircraft and space vehicles
ISO/DIS 18322 * Space systems — General qual-ity and safety requirements for space test centers
2017-01-30
ISO/DIS 18676 * Space systems — Guidelines for the management of systems engineering processes
2017-02-06
TC 21 Equipment for fire protec-tion and fire fighting
ISO/DIS 7240-5
* Fire detection and fire alarm systems — Part 5: Point type heat detectors
2017-02-16
(Revision of ISO 7240-5:2012)
ISO/DIS 7240-27
* Fire detection and alarm sys-tems — Part 27: Point type fire detectors using a smoke sensor in combination with a carbon monoxide sensor and, optionally, one or more heat sensors
(Revision of ISO 7240-27:2009)
TC 22 Road vehicles
ISO/DIS 15118-4
* Road vehicles — Vehicle to grid communication interface — Part 4: Network and application pro-tocol conformance test
2017-01-30
ISO/DIS 19206-1
* Road vehicles — Test devices for target vehicles, vulnerable road users and other objects, for assessment of active safety functions — Part 1: Require-ments for passenger vehicle rear-end targets
ISO/DIS 19206-2
* Road vehicles — Test devices for target vehicles, vulnerable road users and other objects, for as-sessment of active safety func-tions — Part 2: Requirements for pedestrian targets
ISO 6487:2015/DAmd 1
* Road vehicles — Measurement techniques in impact tests — Instrumentation — Amendment 1
2017-02-14
TC 29 Small tools
ISO/DIS 10911 * Solid hardmetal end mills with cylindrical shank — Dimensions
2017-02-16
(Revision of ISO 10911:2010)
TC 31 Tyres, rims and valves
ISO/DIS 4250-1
* Earth-mover tyres and rims — Part 1: Tyre designation and dimensions
2017-02-10
(Revision of ISO 4250-1:2014)
TC 34 Food products
4 ISO Update, Supplement to ISO Focus -- December 2016
ISO/DIS 18593 * Microbiology of the food chain — Horizontal methods for sam-pling techniques from surfaces using contact plates and swabs
2017-01-25
(Revision of ISO 18593:2004)
TC 38 Textiles
ISO/DIS 1833-4
* Textiles — Quantitative chemi-cal analysis — Part 4: Mixtures of certain protein and certain other fibres (method using hypochlorite)
2017-02-14
(Revision of ISO 1833-4:2006)
ISO/DIS 1833-7
* Textiles — Quantitative chemi-cal analysis — Part 7: Mixtures of polyamide and certain other fibres (method using formic acid)
2017-02-14
(Revision of ISO 1833-7:2006)
ISO/DIS 1833-11
* Textiles — Quantitative chemical analysis — Part 11: Mixtures of certain cellulose fibres with cer-tain other fibres (method using sulfuric acid)
2017-02-14
(Revision of ISO 1833-11:2006)
TC 58 Gas cylinders
ISO/DIS 15996.2
* Gas cylinders — Residual pres-sure valves — Specification and type testing of cylinder valves incorporating residual pressure devices
2017-01-02
(Revision of ISO 15996:2005, ISO 15996:2005/Amd 1:2007)
TC 68 Financial services
ISO/DIS 20038 * Banking and related financial services — Key wrap
2017-02-08
TC 71 Concrete, reinforced concrete and pre-stressed concrete
ISO/DIS 18407 * Guidelines for the simplified desing of prestressed concrete tanks for potable water
2017-02-05
TC 79 Light metals and their alloys
ISO/DIS 2135 * Anodizing of aluminium and its alloys — Accelerated test of light fastness of coloured anodic oxidation coatings using artificial light
2017-02-09
(Revision of ISO 2135:2010)
ISO/DIS 2143 * Anodizing of aluminium and its alloys — Estimation of loss of absorptive power of anodic oxidation coatings after sealing — Dye-spot test with prior acid treatment
2017-02-09
(Revision of ISO 2143:2010)
ISO/DIS 3210.2
* Anodizing of aluminium and its alloys — Assessment of quality of sealed anodic oxidation coat-ings by measurement of the loss of mass after immersion in acid solution(s)
2017-01-13
(Revision of ISO 3210:2010)
ISO/DIS 10216 * Anodizing of aluminium and its alloys — Instrumental determina-tion of image clarity of anodic oxidation coatings — Instrumen-tal method
2017-02-09
(Revision of ISO 10216:2010, ISO 10216:2010/Cor 1:2011)
TC 83 Sports and other rec-reational facilities and equipment
ISO/DIS 20380 * Public swimming pools — Computer vision systems for the detection of drowning accidents in swimming pools — Safety requirements and test methods
2017-01-25
TC 84 Devices for administration of medicinal products and catheters
ISO/DIS 7886-3
* Sterile hypodermic syringes for single use — Part 3: Auto-disabled syringes for fixed-dose immunization
2017-02-20
(Revision of ISO 7886-3:2005)
TC 85 Nuclear energy, nuclear technologies, and radio-logical protection
ISO/DIS 19461-1
* Radiological protection — Meas-urement for the clearance of waste contaminated with radio-isotopes for medical applica-tion — Part 1: Measurement of radioactivity
2017-02-20
TC 94 Personal safety -- Pro-tective clothing and equipment
ISO/DIS 11613 * Protective clothing for firefight-er's who are engaged in support activities associated with struc-tural fire fighting — Laboratory test methods and performance
2017-02-14
(Revision of ISO 11613:1999)
ISO/DIS 15384 * Protective clothing for firefighters — Laboratory test methods and performance requirements for wildland firefighting clothing
2017-01-25
(Revision of ISO 15384:2003)
ISO/DIS 18639-1
* PPE for firefighters undertaking specific rescue activities — Part 1: General
2017-02-08
ISO/DIS 18639-3
* PPE ensembles for firefighters undertaking specialist rescue activities — Part 3: Clothing
2017-02-08
TC 107 Metallic and other inorgan-ic coatings
ISO/DIS 28706-3
* Vitreous and porcelain enamels — Determination of resistance to chemical corrosion — Part 3: Determination of resistance to chemical corrosion by alkaline liquids using a hexagonal vessel or a tetragonal glass bottle
(Revision of ISO 28706-3:2008)
TC 108 Mechanical vibration, shock and condition monitoring
ISO/DIS 20816-5
* Mechanical vibration — Meas-urement and evaluation of machine vibration — Part 5: Machine sets in hydraulic power generating and pump-storage plants
2017-02-10
(Revision of ISO 10816-5:2000, ISO 7919-5:2005)
ISO Update, Supplement to ISO Focus -- December 2016 5
ISO/DIS 16063-44
* Methods for the calibration of vibration and shock transduc-ers — Part 44: Calibration of field vibration calibrators
TC 118 Compressors and pneu-matic tools, machines and equipment
ISO 28927-2:2009/DAmd 1
* Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 2: Wrenches, nutrunners and screwdrivers — Amendment 1: Changes in annex C — Brake device
2017-02-09
ISO 28927-4:2010/DAmd 1
* Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 4: Straight grinders — Amendment 1: Cupped wire brushes
2017-02-09
TC 120 Leather
ISO/DIS 17551 * Leather — Pickled sheep pelts — Guidelines for grading on the basis of defect and size
2017-02-17
ISO/DIS 11410 * Leather — Guidelines for pack-aging of wet blue leather
2017-02-20
TC 127 Earth-moving machinery
ISO 7131:2009/DAmd 1
* Earth-moving machinery — Loaders — Terminology and commercial specifications — Amendment 1
2017-02-06
TC 130 Graphic technology
ISO/DIS 12636 * Graphic technology — Blankets for offset printing
2017-01-30
(Revision of ISO 12636:1998)
ISO/DIS 20690 * Graphic technology — Guide-lines to determine the operating power consumption of digital printing devices
TC 132 Ferroalloys
ISO/DIS 5446 * Ferromanganese — Specifica-tion and conditions of delivery
2017-02-15
(Revision of ISO 5446:1980)
TC 159 Ergonomics
ISO/DIS 9241-11.2
* Ergonomics of human-system interaction — Part 11: Usability: Definitions and concepts
(Revision of ISO 9241-11:1998)
TC 171 Document management applications
ISO/DIS 11506 * Document management applica-tions — Archiving of electronic data — Computer output micro-form (COM) / Computer output laser disc (COLD)
2017-02-08
(Revision of ISO 11506:2009)
TC 172 Optics and photonics
ISO/DIS 11986 * Ophthalmic optics — Contact lenses and contact lens care products — Determination of preservative uptake and release
2017-02-08
(Revision of ISO 11986:2010)
TC 190 Soil quality
ISO/DIS 23611-1
* Soil quality — Sampling of soil invertebrates — Part 1: Hand-sorting and extraction of earthworms
2017-02-08
(Revision of ISO 23611-1:2006)
TC 198 Sterilization of health care products
ISO/DIS 18472 * Sterilization of health care prod-ucts — Biological and chemical indicators — Test equipment
2017-02-09
(Revision of ISO 18472:2006)
TC 201 Surface chemical analysis
ISO/DIS 20411 * Surface chemical analysis — Secondary ion mass spectrom-etry — Correction method for saturated intensity in single ion counting dynamic secondary ion mass spectrometry
2017-02-01
TC 202 Microbeam analysis
ISO/DIS 20263 * Microbeam analysis — Ana-lytical transmission electron microscopy — Determination method for interface position in the cross-sectional image of the layered materials
2017-02-17
TC 204 Intelligent transport systems
ISO/DIS 16410-1
* Electronic fee collection — Evaluation of equipment for conformity to ISO 17575-3 — Part 1: Test suite structure and test purposes
2017-02-14
(Revision of ISO/TS 16410-1:2011)
ISO/DIS 17427-1
* Intelligent transport systems — Cooperative ITS — Part 1: Roles and responsibilities in the context of co-operative ITS architecture(s)
2017-02-14
(Revision of ISO/TS 17427:2014)
TC 206 Fine ceramics
ISO/DIS 19630 * Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods of test for reinforcements — Determination of tensile properties of filaments at ambient temperature
2017-02-08
ISO/DIS 19634 * Fine ceramics (advanced ceram-ics, advanced technical ceram-ics) — Ceramic composites — Notations and symbols
2017-02-08
ISO/DIS 26602 * Fine ceramics (advanced ceramics, advanced techni-cal ceramics) — Silicon nitride materials for rolling bearing balls and rollers
2017-01-31
(Revision of ISO 26602:2009)
TC 219 Floor coverings
ISO/DIS 11856 * Textile floor coverings — Test methods for the determination of fibre bind using a modified martindale machine
2017-02-01
(Revision of ISO 11856:2014)
TC 232 Learning services outside formal education
ISO/DIS 29993.2
* Learning services outside formal education — Service requirements
2017-01-17
(Revision of ISO 29990:2010)
6 ISO Update, Supplement to ISO Focus -- December 2016
TC 261 Additive manufacturing
ISO/ASTM DIS 52910.2
* Guidelines for additive manufac-turing design
2017-01-09
IULTCS International Union of Leather Technologists and Chemists Societies
ISO/DIS 4098 * Leather — Chemical tests — Determination of water-soluble matter, water-soluble inorganic matter and water-soluble organic matter
2017-02-18
(Revision of ISO 4098:2006)
JTC 1 Information technology
ISO/IEC DIS 21964-1
* Information technology — Office machines — Destruction of data carriers — Part 1: Principles and definitions
2017-02-21
ISO/IEC DIS 21964-2
* Information technology — Office machines — Destruction of data carriers — Part 2: Requirements for equipment for destruction of data carriers
2017-02-21
ISO/IEC DIS 21964-3
* Information technology — Office machines — Destruction of data carriers — Part 3: Process of destruction of data carriers
2017-02-21
ISO/IEC DIS 30140-1.2
* Information technology — Underwater acoustic sensor network (UWASN) — Part 1: Overview and requirements
2017-01-17
ISO/IEC DIS 30140-2.2
* Information technology — Underwater acoustic sensor network (UWASN) — Part 2: Reference architecture
2017-01-17
ISO/IEC 23008-5/DAmd 1
* Information technology — High efficiency coding and media delivery in heterogeneous envi-ronments — Part 5: Reference software for high efficiency video coding — Amendment 1: Refer-ence software for screen content coding extensions
2017-02-01
ISO/IEC DIS 30114-2
* Information technology — Ex-tensions of Office Open XML file formats — Part 2: Character repertoire checking
2017-02-10
ISO/IEC DIS 24709-1.2
Information technology — Con-formance testing for BioAPI — Part 1: Methods and procedures
2017-01-14
(Revision of ISO/IEC 24709-1:2007)
FDIS circulated
Period from 01 November to 30 November 2016
These Final draft International Standards have been submitted to the ISO member bodies for formal approval by the date shown
* Available in English only
Vote terminates
TC 4 Rolling bearings
ISO/FDIS 14728-1
* Rolling bearings — Linear mo-tion rolling bearings — Part 1: Dynamic load ratings and rating life
(Revision of ISO 14728-1:2004)
ISO/FDIS 14728-2
* Rolling bearings — Linear motion rolling bearings — Part 2: Static load ratings
(Revision of ISO 14728-2:2004)
TC 8 Ships and marine technology
ISO/FDIS 20519
* Ships and marine technology — Specification for bunkering of liquefied natural gas fuelled vessels
2017-01-03
ISO/FDIS 13643-1
* Ships and marine technology — Manoeuvring of ships — Part 1: General concepts, quantities and test conditions
2017-01-05
(Revision of ISO 13643-1:2013)
ISO/FDIS 13643-2
* Ships and marine technology — Manoeuvring of ships — Part 2: Turning and yaw checking
2017-01-05
(Revision of ISO 13643-2:2013)
ISO/FDIS 13643-3
* Ships and marine technology — Manoeuvring of ships — Part 3: Yaw stability and steering
2017-01-05
(Revision of ISO 13643-3:2013)
ISO/FDIS 13643-4
* Ships and marine technology — Manoeuvring of ships — Part 4: Stopping, acceleration, traversing
2017-01-05
(Revision of ISO 13643-4:2013)
ISO/FDIS 13643-5
* Ships and marine technology — Manoeuvring of ships — Part 5: Submarine specials
2017-01-05
(Revision of ISO 13643-5:2013)
ISO/FDIS 13643-6
* Ships and marine technology — Manoeuvring of ships — Part 6: Model test specials
2017-01-05
(Revision of ISO 13643-6:2013)
TC 17 Steel
ISO/FDIS 4885 * Ferrous materials — Heat treat-ments — Vocabulary
2017-01-13
(Revision of ISO 4885:1996)
ISO/FDIS 16120-2
* Non-alloy steel wire rod for conversion to wire — Part 2: Specific requirements for general purpose wire rod
2017-01-14
(Revision of ISO 16120-2:2011)
TC 20 Aircraft and space vehicles
ISO/FDIS 12604-1
* Aircraft ground handling — Checked baggage — Part 1: Mass and dimensions
2017-01-13
ISO/FDIS 11218
* Aerospace — Cleanliness clas-sification for hydraulic fluids
(Revision of ISO 11218:1993)
ISO Update, Supplement to ISO Focus -- December 2016 7
ISO/FDIS 19826
* Space systems — Programme management — Management of product characteristics
2017-01-05
TC 21 Equipment for fire protec-tion and fire fighting
ISO/FDIS 6182-13
* Fire protection — Automatic sprinkler systems — Part 13: Requirements and test methods for extended-coverage sprinklers
2017-01-06
TC 22 Road vehicles
ISO/FDIS 15005
* Road vehicles — Ergonomic aspects of transportation and control systems — Dialogue management principles and compliance procedures
2017-01-21
(Revision of ISO 15005:2002)
ISO/FDIS 15008
* Road vehicles — Ergonomic aspects of transport information and control systems — Specifi-cations and test procedures for in-vehicle visual presentation
2017-01-24
(Revision of ISO 15008:2009)
ISO/FDIS 12614-19
* Road vehicles — Liquefied natural gas (LNG) fuel system components — Part 19: Auto-matic valve
2017-01-24
ISO/FDIS 12619-6
* Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blend fuel system components — Part 6: Automatic valve
2017-01-24
TC 25 Cast irons and pig irons
ISO/FDIS 16112
* Compacted (vermicular) graphite cast irons — Classification
2017-01-03
(Revision of ISO 16112:2006)
TC 28 Petroleum products and re-lated products of synthetic or biological origin
ISO/FDIS 6246 * Petroleum products — Gum content of fuels — Jet evapora-tion method
2017-01-06
(Revision of ISO 6246:1995, ISO 6246:1995/Cor 1:1998)
ISO/FDIS 12917-1
* Petroleum and liquid petroleum products — Calibration of hori-zontal cylindrical tanks — Part 1: Manual methods
2016-12-29
(Revision of ISO 12917-1:2002, ISO 12917-1:2002/Cor 1:2009)
ISO/FDIS 8216-1
* Petroleum products — Fuels (class F) classification — Part 1: Categories of marine fuels
2017-01-03
(Revision of ISO 8216-1:2010)
ISO/FDIS 8217 * Petroleum products — Fuels (class F) — Specifications of marine fuels
2016-12-29
(Revision of ISO 8217:2012)
TC 29 Small tools
ISO/FDIS 494 * Cylindrical shank twist drills — Long series
2017-01-04
(Revision of ISO 494:2009)
ISO/FDIS 529 * Short machine taps and hand taps
2017-01-11
(Revision of ISO 529:1993)
ISO/FDIS 1832 * Indexable inserts for cutting tools — Designation
2017-01-11
(Revision of ISO 1832:2012)
ISO/FDIS 2250 * Finishing reamers for Morse and metric tapers, with cylindrical shanks and Morse taper shanks
2017-01-04
(Revision of ISO 2250:2009)
ISO/FDIS 2284 * Hand taps for parallel and taper pipe threads — General dimen-sions and marking
2017-01-11
(Revision of ISO 2284:1987)
ISO/FDIS 5468 * Rotary and rotary impact ma-sonry drill bits with hardmetal tips — Dimensions
2017-01-11
(Revision of ISO 5468:2006)
TC 34 Food products
ISO/FDIS 15216-1
* Microbiology of the food chain — Horizontal method for determination of hepatitis A virus and norovirus using real-time RT-PCR — Part 1: Method for quantification
2017-01-21
(Revision of ISO/TS 15216-1:2013)
ISO/FDIS 6320 * Animal and vegetable fats and oils — Determination of refrac-tive index
(Revision of ISO 6320:2000)
TC 35 Paints and varnishes
ISO/FDIS 16773-4
* Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic speci-mens — Part 4: Examples of spectra of polymer-coated and uncoated specimens
2016-12-29
(Revision of ISO 16773-4:2009)
ISO/FDIS 8503-5
* Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 5: Replica tape method for the determination of the surface profile
2016-12-29
(Revision of ISO 8503-5:2003)
TC 39 Machine tools
ISO/FDIS 17543-1
* Machines tools — Test condi-tions for universal spindle heads — Part 1: Accessory heads for machines with horizontal spindle (horizontal Z-axis)
TC 41 Pulleys and belts (including veebelts)
ISO/FDIS 15236-3
* Steel cord conveyor belts — Part 3: Special safety requirements for belts for use in underground installations
2017-02-11
(Revision of ISO 15236-3:2007)
TC 44 Welding and allied processes
8 ISO Update, Supplement to ISO Focus -- December 2016
ISO/FDIS 14555
* Welding — Arc stud welding of metallic materials
2017-02-22
(Revision of ISO 14555:2014)
TC 45 Rubber and rubber products
ISO/FDIS 6806 * Rubber hoses and hose as-semblies for use in oil burners — Specification
2016-12-29
(Revision of ISO 6806:2014)
TC 46 Information and documentation
ISO/FDIS 15836-1
* Information and documentation — The Dublin Core meta-data element set — Part 1: Core elements
(Revision of ISO 15836:2009)
TC 58 Gas cylinders
ISO 10297:2014/FDAmd 1
* Gas cylinders — Cylinder valves — Specification and type test-ing — Amendment 1: Pressure drums and tubes
2017-01-06
TC 61 Plastics
ISO/FDIS 16396-2
* Plastics — Polyamide (PA) moulding and extrusion materi-als — Part 2: Preparation of test specimens and determination of properties
2016-12-29
(Revision of ISO 1874-2:2012)
ISO/FDIS 20028-1
* Plastics — Thermoplastic polyester (TP) moulding and extrusion materials — Part 1: Designation system and basis for specifications
2016-12-29
(Revision of ISO 7792-1:2012)
ISO/FDIS 20028-2
* Plastics — Thermoplastic polyester (TP) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties
2016-12-29
(Revision of ISO 7792-2:2012)
TC 67 Materials, equipment and offshore structures for pe-troleum, petrochemical and natural gas industries
ISO/FDIS 16530-1
* Petroleum and natural gas indus-tries — Well integrity — Part 1: Life cycle governance
2016-12-29
TC 68 Financial services
ISO/FDIS 13491-2
* Financial services — Secure cryptographic devices (retail) — Part 2: Security compliance checklists for devices used in financial transactions
2017-01-14
(Revision of ISO 13491-2:2016)
TC 69 Applications of statistical methods
ISO/FDIS 7870-8
* Control charts — Part 8: Chart-ing techniques for short runs and small mixed batches
2017-01-24
ISO/FDIS 22514-2
* Statistical methods in process management — Capability and performance — Part 2: Process capability and performance of time-dependent process models
(Revision of ISO 22514-2:2013)
TC 83 Sports and other rec-reational facilities and equipment
ISO/FDIS 10256-5
* Protective equipment for use in ice hockey — Part 5: Neck lac-eration protectors for ice hockey players
2017-01-17
(Revision of ISO 10256:2003)
TC 85 Nuclear energy, nuclear technologies, and radio-logical protection
ISO/ASTM FDIS 51939
Practice for blood irradiation dosimetry
2017-01-17
(Revision of ISO/ASTM 51939:2013)
ISO/FDIS 18417
* Iodine charcoal sorbents for nuclear facilities — Method for defining sorption capacity index
2017-01-24
TC 98 Bases for design of structures
ISO/FDIS 3010 * Bases for design of structures — Seismic actions on structures
(Revision of ISO 3010:2001)
TC 106 Dentistry
ISO/FDIS 9873 * Dentistry — Intra-oral mirrors
2017-01-06
(Revision of ISO 9873:1998, ISO 9873:1998/Cor 1:2000)
TC 121 Anaesthetic and respiratory equipment
ISO/FDIS 18562-1
* Biocompatibility evaluation of breathing gas pathways in healthcare applications — Part 1: Evaluation and testing within a risk management process
2017-01-24
ISO/FDIS 18562-2
* Biocompatibility evaluation of breathing gas pathways in healthcare applications — Part 2: Tests for emissions of particulate matter
2017-01-24
ISO/FDIS 18562-3
* Biocompatibility evaluation of breathing gas pathways in healthcare applications — Part 3: Tests for emissions of volatile organic compounds (VOCs)
2017-01-24
ISO/FDIS 18562-4
* Biocompatibility evaluation of breathing gas pathways in healthcare applications — Part 4: Tests for leachables in condensate
2017-01-24
ISO/FDIS 80601-2-56
* Medical electrical equipment — Part 2-56: Particular require-ments for basic safety and essential performance of clinical thermometers for body tempera-ture measurement
2017-01-02
(Revision of ISO 80601-2-56:2009)
TC 127 Earth-moving machinery
ISO/FDIS 15818.2
* Earth-moving machinery — Lifting and tying-down attach-ment points — Performance requirements
2017-01-24
TC 131 Fluid power systems
ISO Update, Supplement to ISO Focus -- December 2016 9
ISO 12151-1:2010/FDAmd 1
* Connections for hydraulic fluid power and general use — Hose fittings — Part 1: Hose fittings with ISO 8434-3 O-ring face seal ends — Amendment 1
2017-01-05
TC 134 Fertilizers and soil conditioners
ISO/FDIS 19670
* Fertilizers and soil condition-ers — Solid urea aldehyde slow release fertilizer — General requirements
2017-01-04
ISO/FDIS 19746
* Determination of urea content in urea-based fertilizers by high performance liquid chromatogra-phy (HPLC)
TC 135 Non-destructive testing
ISO/FDIS 20339
* Non-destructive testing — Equipment for eddy current examination — Array probe characteristics and verification
2017-01-04
ISO/FDIS 20669
* Non-destructive testing — Pulsed eddy current test-ing of ferromagnetic metallic components
2017-01-11
ISO/FDIS 20484
* Non-destructive testing — Leak testing — Vocabulary
2017-01-04
TC 138 Plastics pipes, fittings and valves for the transport of fluids
ISO/FDIS 16611
* Plastics piping systems for drainage and sewerage without pressure — Non-circular pipes and joints made of glass-rein-forced thermosetting plastics (GRP) based on unsaturated polyester resins (UP) — Dimen-sions, requirements and tests
2017-01-06
TC 147 Water quality
ISO/FDIS 11731
* Water quality — Enumeration of Legionella
2017-01-11
(Revision of ISO 11731:1998, ISO 11731-2:2004)
ISO/FDIS 5667-16
* Water quality — Sampling — Part 16: Guidance on biotesting of samples
2017-01-07
(Revision of ISO 5667-16:1998)
TC 156 Corrosion of metals and alloys
ISO/FDIS 15257
* Cathodic protection — Com-petence levels of cathodic protection persons — Basis for a certification scheme
2017-01-14
TC 159 Ergonomics
ISO/FDIS 9241-112
* Ergonomics of human-system interaction — Part 112: Prin-ciples for the presentation of information
2017-01-04
TC 160 Glass in building
ISO/FDIS 12540
* Glass in building — Tempered soda lime silicate safety glass
2017-01-14
ISO/FDIS 16293-2
* Glass in building — Basic soda lime silicate glass products — Part 2: Float glass
ISO/FDIS 16293-3
* Glass in building — Basic soda lime silicate glass products — Part 3: Polished wired glass
ISO/FDIS 20657
* Glass in building — Heat soaked tempered soda lime silicate safety glass
2017-01-06
TC 163 Thermal performance and energy use in the built environment
ISO/FDIS 19467
* Thermal performance of win-dows and doors — Determina-tion of solar heat gain coefficient using solar simulator
TC 165 Timber structures
ISO/FDIS 18100
* Timber structures — Finger-joint-ed timber — Manufacturing and production requirements
2017-01-14
TC 172 Optics and photonics
ISO/FDIS 16331-1
* Optics and optical instruments — Laboratory procedures for testing surveying and construc-tion instruments — Part 1: Performance of handheld laser distance meters
2017-01-03
(Revision of ISO 16331-1:2012)
ISO/FDIS 10939
* Ophthalmic instruments — Slit-lamp microscopes
2017-02-05
(Revision of ISO 10939:2007)
TC 182 Geotechnics
ISO/FDIS 17892-5
* Geotechnical investigation and testing — Laboratory testing of soil — Part 5: Incremental load-ing oedometer test
2016-12-30
(Revision of ISO/TS 17892-5:2004, ISO/TS 17892-5:2004/Cor 1:2006)
ISO/FDIS 17892-6
* Geotechnical investigation and testing — Laboratory testing of soil — Part 6: Fall cone test
2016-12-30
(Revision of ISO/TS 17892-6:2004, ISO/TS 17892-6:2004/Cor 1:2006)
TC 190 Soil quality
ISO/FDIS 11272
* Soil quality — Determination of dry bulk density
2017-01-10
(Revision of ISO 11272:1998)
ISO/FDIS 19204
* Soil quality — Procedure for site-specific ecological risk assess-ment of soil contamination (soil quality TRIAD approach)
2017-01-10
TC 194 Biological and clinical eval-uation of medical devices
ISO/FDIS 10993-4
* Biological evaluation of medical devices — Part 4: Selection of tests for interactions with blood
2017-01-21
(Revision of ISO 10993-4:2002, ISO 10993-4:2002/Amd 1:2006)
TC 201 Surface chemical analysis
ISO/FDIS 15470
* Surface chemical analysis — X-ray photoelectron spectroscopy — Description of selected instru-mental performance parameters
2017-01-25
(Revision of ISO 15470:2004)
10 ISO Update, Supplement to ISO Focus -- December 2016
TC 206 Fine ceramics
ISO/FDIS 19618
* Fine ceramics (advanced ceram-ics, advanced technical ceram-ics) — Measurement method for normal spectral emissivity using blackbody reference with an FTIR spectrometer
2017-01-11
TC 217 Cosmetics
ISO/FDIS 29621
* Cosmetics — Microbiology — Guidelines for the risk assess-ment and identification of micro-biologically low-risk products
2017-01-24
(Revision of ISO 29621:2010)
TC 224 Service activities relating to drinking water supply systems and wastewater systems - Quality criteria of the service and perfor-mance indicators
ISO/FDIS 24523
* Service activities relating to drinking water supply systems and wastewater systems — Guidelines for benchmarking of water utilities
2017-01-06
TC 249 Traditional chinese medicine
ISO/FDIS 18668-2
* Traditional Chinese medicine — Coding system for Chinese medicines — Part 2: Codes for decoction pieces
2016-12-29
ISO/FDIS 18668-3
* Traditional Chinese medicine — Coding system for Chinese medicines — Part 3: Codes for Chinese Materia Medica
2016-12-29
ISO/FDIS 18668-4
* Traditional Chinese medicine — Coding system for Chinese medicines — Part 4: Codes for granule forms of individual me-dicinals for prescriptions
2016-12-29
ISO/FDIS 19610
* Traditional Chinese medicine — General requirements for industrial manufacturing process of red ginseng (Panax ginseng C.A. Meyer)
2017-01-24
ISO/FDIS 20311
* Traditional Chinese medicine — Salvia miltiorrhiza seeds and seedlings
2017-01-14
IULTCS International Union of Leather Technologists and Chemists Societies
ISO/FDIS 20136
* Leather — Determination of deg-radability by micro-organisms
2017-01-13
ISO/FDIS 20137
* Leather — Chemical tests — Guidelines for testing critical chemicals in leather
2017-01-13
JTC 1 Information technology
ISO/IEC/IEEE 8802-1Q:2016/FDAmd 1
* Information technology — Tel-ecommunications and informa-tion exchange between systems — Local and metropolitan area networks — Specific require-ments — Part 1Q: Bridges and bridged networks — Amendment 1: Path Control and Reservation
2017-04-19
ISO/IEC/IEEE 8802-1Q:2016/FDAmd 3
Information technology — Tel-ecommunications and informa-tion exchange between systems — Local and metropolitan area networks — Specific require-ments — Part 1Q: Bridges and bridged networks — Amendment 3: Enhancements for Scheduled Traffic
2017-04-19
ISO/IEC/IEEE FDIS 8802-1AB
* Information technology — Tel-ecommunications and informa-tion exchange between systems — Local and metropolitan area networks — Specific require-ments — Part 1AB: Station and media access control connectiv-ity discovery
2017-04-11
(Revision of ISO/IEC/IEEE 8802-1AB:2014)
ISO/IEC FDIS 23000-18
* Information technology — Mul-timedia application formats (MPEG-A) — Part 18: Media linking application format
2017-01-24
Standards published
New International Standards published between 01 November and 30 November 2016
* Available in English only
** French version of standard previously published in English only
Price
group
PC 278 Anti-bribery management systems
ISO 37001:2016
Anti-bribery management systems — Requirements with guidance for use
F
TC 6 Paper, board and pulps
ISO 18522:2016
Paper and board — Automated off-line testing of physical properties for CD (cross direction) profiles
E
ISO/TS 20460:2015
Paper and board — Automated on-line testing — Metrological comparability between standardized measurements and output of on-line gauges
C
TC 8 Ships and marine technology
ISO 19030-1:2016
* Ships and marine technology — Meas-urement of changes in hull and propel-ler performance — Part 1: General principles
E
ISO 19030-2:2016
* Ships and marine technology — Meas-urement of changes in hull and propel-ler performance — Part 2: Default method
F
ISO Update, Supplement to ISO Focus -- December 2016 11
ISO 19030-3:2016
* Ships and marine technology — Meas-urement of changes in hull and propel-ler performance — Part 3: Alternative methods
C
ISO 3078:2016 * Shipbuilding — Cargo winches
B
ISO 19354:2016
* Ships and marine technology — Ma-rine cranes — General requirements
C
ISO 19357:2016
* Ships and marine technology — Ma-rine cranes — Design requirements for low temperature operation
B
ISO 19360:2016
* Ships and marine technology — Ma-rine cranes — Technical requirements for rigging applications
B
ISO 19697:2016
* Ships and marine technology — Navi-gation and ship operations — Elec-tronic inclinometers
D
TC 10 Technical product documentation
ISO 12757-1:2016
Ball point pens and refills — Part 1: General use
B
TC 17 Steel
ISO/TS 10719:2016
* Cast irons — Determination of non-combined carbon content — lnfrared absorption method after combustion in an induction furnace
C
TC 20 Aircraft and space vehicles
ISO 43:2016 * Aircraft — Jacking pads
A
ISO 8575:2016 * Aerospace — Fluid systems — Hy-draulic system tubing
B
ISO 10537:2016
* Space data and information transfer systems — Encapsulation service
E
ISO 18440:2016
* Space data and information transfer systems — Space link extension — Internet protocol for transfer services
G
ISO 18441:2016
* Space data and information transfer systems — Space link extension — Application program interface for trans-fer services — Core specification
H
ISO 18442:2016
* Space data and information transfer systems — Space link extension — Application program interface for return all frames service
G
ISO 18443:2016
* Space data and information transfer systems — Space link extension — Application program interface for return channel frames service
G
ISO 18444:2016
* Space data and information transfer systems — Space link extension — Application program interface for return operational control fields service
G
ISO 18445:2016
* Space data and information transfer systems — Space link extension — Application program interface for the forward CLTU service
H
ISO 18446:2016
* Space data and information transfer systems — Space link extension — Application program interface for the forward space packet service
H
ISO 21323:2016
* Space data and information transfer systems — CCSDS Bundle protocol specification
H
ISO 21324:2016
* Space data and information transfer systems — Space data link security protocol
G
ISO 22645:2016
* Space data and information transfer systems — TM (telemetry) space data link protocol
H
ISO 22664:2016
* Space data and information transfer systems — TC (telecommand) space data link protocol
H
ISO 22666:2016
* Space data and information transfer systems — AOS (advanced orbiting systems) space data link protocol
H
ISO 17540:2016
* Space systems — Liquid rocket engines and test stands — Terms and definitions
A
ISO 17666:2016
* Space systems — Risk management
D
ISO 18257:2016
* Space systems — Semiconductor integrated circuits for space applica-tions — Design requirements
D
TC 22 Road vehicles
ISO 13400-3:2016
* Road vehicles — Diagnostic communi-cation over Internet Protocol (DoIP) — Part 3: Wired vehicle interface based on IEEE 802.3
C
ISO/TR 17987-5:2016
* Road vehicles — Local Interconnect Network (LIN) — Part 5: Application programmers interface (API)
E
ISO 8820-4:2016
* Road vehicles — Fuse-links — Part 4: Fuse-links with female contacts (type A) and bolt-in contacts (type B) and their test fixtures
C
ISO 18375:2016
* Heavy commercial vehicles and buses — Test method for yaw stability — Sine with dwell test
C
ISO 2698:2016 * Diesel engines — Clamp-mounted fuel injectors, types 7 and 28
A
ISO 2974:2016 * Diesel engines — 60° female cones for high-pressure fuel injection components
B
ISO 8535-1:2016
* Diesel engines — Steel tubes for high-pressure fuel injection pipes — Part 1: Requirements for seamless cold-drawn single-wall tubes
B
12 ISO Update, Supplement to ISO Focus -- December 2016
ISO 18418-1:2016
* Gasoline engines — Medium pressure liquid fuel supply connections — Part 1: 60° female cone connectors
A
ISO 19724:2016
* Gasoline engines with direct injec-tion — Cleanliness assessment of fuel injection equipment
A
ISO 15082:2016
* Road vehicles — Tests for rigid plastic safety glazing materials
F
ISO/TR 17950:2016
* Impact test procedures for road vehicles — Rear seat positioning procedures for Hybrid III 5th percentile female dummy
B
ISO 18300:2016
* Electrically propelled vehicles — Test specifications for lithium-ion battery systems combined with lead acid bat-tery or capacitor
C
ISO 15501-1:2016
* Road vehicles — Compressed natural gas (CNG) fuel systems — Part 1: Safety requirements
C
ISO 15501-2:2016
* Road vehicles — Compressed natural gas (CNG) fuel systems — Part 2: Test methods
B
TC 23 Tractors and machinery for agri-culture and forestry
ISO 3767-2:2016
Tractors, machinery for agriculture and forestry, powered lawn and garden equipment — Symbols for operator controls and other displays — Part 2: Symbols for agricultural tractors and machinery
G
TC 27 Solid mineral fuels
ISO 622:2016 * Solid mineral fuels — Determination of phosphorus content — Reduced mo-lybdophosphate photometric method
A
ISO 11723:2016
* Solid mineral fuels — Determination of arsenic and selenium — Eschka's mixture and hydride generation method
A
ISO 11724:2016
* Solid mineral fuels — Determination of total fluorine in coal, coke and fly ash
B
ISO 15237:2016
* Solid mineral fuels — Determination of total mercury content of coal
A
ISO 15238:2016
* Solid mineral fuels — Determination of total cadmium content of coal
A
TC 28 Petroleum products and related products of synthetic or biologi-cal origin
ISO 19291:2016
* Lubricants — Determination of tribo-logical quantities for oils and greases — Tribological test in the translatory oscillation apparatus
C
ISO/TR 19686-100:2016
* Petroleum products — Equivalency of test method determining the same property — Part 100: Background and principle of the comparison and the evaluation of equivalency
A
ISO 15380:2016
Lubricants, industrial oils and related products (class L) — Family H (Hy-draulic systems) — Specifications for hydraulic fluids in categories HETG, HEPG, HEES and HEPR
D
ISO 29945:2016
* Refrigerated non-petroleum based liq-uefied gaseous fuels — Dimethylether (DME) — Method of manual sampling onshore terminals
B
TC 29 Small tools
ISO 238:2016 Reduction sleeves and extension sock-ets for tools with Morse taper shanks
B
ISO 1711-1:2016
Assembly tools for screws and nuts — Technical specifications — Part 1: Hand-operated wrenches and sockets
A
ISO 1711-2:2016
Assembly tools for screws and nuts — Technical specifications — Part 2: Machine-operated sockets (impact)
A
TC 34 Food products
ISO/TS 34700:2016
* Animal welfare management — Gen-eral requirements and guidance for organizations in the food supply chain
B
ISO/TS 21569-4:2016
* Horizontal methods for molecular biomarker analysis — Methods of analysis for the detection of genetically modified organisms and derived prod-ucts — Part 4: Real-time PCR based screening methods for the detection of the P-nos and P-nos-nptII DNA sequences
B
ISO/TS 21569-5:2016
* Horizontal methods for molecular biomarker analysis — Methods of analysis for the detection of geneti-cally modified organisms and derived products — Part 5: Real-time PCR based screening method for the detec-tion of the FMV promoter (P-FMV) DNA sequence
B
ISO/TS 21569-6:2016
* Horizontal methods for molecular bio-marker analysis — Methods of analysis for the detection of genetically modi-fied organisms and derived products — Part 6: Real-time PCR based screening methods for the detection of cry1Ab/Ac and Pubi-cry DNA sequences
B
TC 35 Paints and varnishes
ISO 15741:2016
* Paints and varnishes — Friction-reduction coatings for the interior of on- and offshore steel pipelines for non-corrosive gases
D
TC 38 Textiles
ISO 12947-2:2016
Textiles — Determination of the abrasion resistance of fabrics by the Martindale method — Part 2: Determi-nation of specimen breakdown
C
TC 44 Welding and allied processes
ISO 17635:2016
Non-destructive testing of welds — General rules for metallic materials
C
ISO 17637:2016
Non-destructive testing of welds — Visual testing of fusion-welded joints
B
TC 45 Rubber and rubber products
ISO Update, Supplement to ISO Focus -- December 2016 13
ISO 4641:2016 Rubber hoses and hose assemblies for water suction and discharge — Specification
B
ISO 6804:2016 * Rubber and plastics inlet hoses and hose assemblies for washing-machines and dishwashers — Specification
C
ISO 4666-3:2016
Rubber, vulcanized — Determination of temperature rise and resistance to fatigue in flexometer testing — Part 3: Compression flexometer (constant-strain type)
C
ISO 1421:2016 * Rubber- or plastics-coated fabrics — Determination of tensile strength and elongation at break
C
ISO 5470-1:2016
* Rubber- or plastics-coated fabrics — Determination of abrasion resistance — Part 1: Taber abrader
B
TC 58 Gas cylinders
ISO 24431:2016
Gas cylinders — Seamless, welded and composite cylinders for com-pressed and liquefied gases (exclud-ing acetylene) — Inspection at time of filling
C
TC 59 Buildings and civil engineering works
ISO 12006-3:2007
Building construction — Organiza-tion of information about construction works — Part 3: Framework for object-oriented information
E
ISO 16757-2:2016
* Data structures for electronic product catalogues for building services — Part 2: Geometry
H
TC 60 Gears
ISO 23509:2016
Bevel and hypoid gear geometry
H
TC 67 Materials, equipment and off-shore structures for petroleum, petrochemical and natural gas industries
ISO 17776:2016
* Petroleum and natural gas industries — Offshore production installations — Major accident hazard management during the design of new installations
H
ISO 20088-1:2016
Determination of the resistance to cryogenic spillage of insulation materi-als — Part 1: Liquid phase
D
TC 70 Internal combustion engines
ISO 15550:2016
Internal combustion engines — Deter-mination and method for the meas-urement of engine power — General requirements
F
TC 71 Concrete, reinforced concrete and pre-stressed concrete
ISO 1920-2:2016
* Testing of concrete — Part 2: Proper-ties of fresh concrete
G
ISO 15673:2016
* Guidelines for the simplified design of structural reinforced concrete for buildings
H
TC 72 Textile machinery and accessories
ISO 96-1:2016 * Textile machinery and accessories — Rings and travellers for ring spin-ning and ring twisting frames — Part 1: Flange rings T and SF and their travellers
A
TC 76 Transfusion, infusion and injection, and blood process-ing equipment for medical and pharmaceutical use
ISO 8536-6:2016
* Infusion equipment for medical use — Part 6: Freeze drying closures for infusion bottles
C
ISO 8536-14:2016
Infusion equipment for medical use — Part 14: Clamps and flow regulators for transfusion and infusion equipment without fluid contact
A
ISO 11040-8:2016
Prefilled syringes — Part 8: Require-ments and test methods for finished prefilled syringes
B
ISO 11418-1:2016
* Containers and accessories for phar-maceutical preparations — Part 1: Drop-dispensing glass bottles
A
ISO 11418-2:2016
* Containers and accessories for phar-maceutical preparations — Part 2: Screw-neck glass bottles for syrups
A
ISO 11418-3:2016
* Containers and accessories for pharmaceutical preparations — Part 3: Screw-neck glass bottles (veral) for solid and liquid dosage forms
A
TC 83 Sports and other recreational facilities and equipment
ISO 20957-4:2016
Stationary training equipment — Part 4: Strength training benches, additional specific safety requirements and test methods
A
ISO 20957-5:2016
Stationary training equipment — Part 5: Stationary exercise bicycles and upper body crank training equipment, additional specific safety requirements and test methods
D
ISO 10256-1:2016
Protective equipment for use in ice hockey — Part 1: General requirements
A
ISO 10256-2:2016
Protective equipment for use in ice hockey — Part 2: Head protection for skaters
D
ISO 10256-3:2016
Protective equipment for use in ice hockey — Part 3: Face protectors for skaters
E
ISO 10256-4:2016
Protective equipment for use in ice hockey — Part 4: Head and face pro-tection for goalkeepers
B
TC 85 Nuclear energy, nuclear tech-nologies, and radiological protection
ISO 16638-1:2015
Radiological protection — Monitoring and internal dosimetry for specific ma-terials — Part 1: Inhalation of uranium compounds
F
14 ISO Update, Supplement to ISO Focus -- December 2016
ISO 16645:2016
* Radiological protection — Medical electron accelerators — Requirements and recommendations for shielding design and evaluation
G
ISO 19017:2015
Guidance for gamma spectrometry measurement of radioactive waste
F
TC 92 Fire safety
ISO 12828-2:2016
* Validation methods for fire gas analy-ses — Part 2: Intralaboratory validation of quantification methods
E
ISO 16312-1:2016
Guidance for assessing the validity of physical fire models for obtaining fire effluent toxicity data for fire hazard and risk assessment — Part 1: Criteria
B
TC 94 Personal safety -- Protective clothing and equipment
ISO 9151:2016 Protective clothing against heat and flame — Determination of heat trans-mission on exposure to flame
C
ISO 15025:2016
Protective clothing — Protection against flame — Method of test for limited flame spread
D
ISO/TS 16975-1:2016
Respiratory protective devices — Se-lection, use and maintenance — Part 1: Establishing and implementing a res-piratory protective device programme
G
TC 106 Dentistry
ISO/TR 28642:2016
* Dentistry — Guidance on colour measurement
B
TC 107 Metallic and other inorganic coatings
ISO 19487:2016
* Metallic and other inorganic coatings — Electrodeposited nickel-ceramics composite coatings
B
ISO 19598:2016
Metallic coatings — Electroplated coatings of zinc and zinc alloys on iron or steel with supplementary Cr(VI)-free treatment
B
TC 108 Mechanical vibration, shock and condition monitoring
ISO 8608:2016 * Mechanical vibration — Road surface profiles — Reporting of measured data
F
ISO 20816-1:2016
* Mechanical vibration — Measurement and evaluation of machine vibration — Part 1: General guidelines
E
ISO 21940-11:2016
* Mechanical vibration — Rotor balanc-ing — Part 11: Procedures and toler-ances for rotors with rigid behaviour
E
ISO 5344:2004/Amd 1:2016
* Electrodynamic vibration generating systems — Performance characteris-tics — Amendment 1
XZ
ISO 8626:1989/Amd 1:2016
* Servo-hydraulic test equipment for generating vibration — Method of describing characteristics — Amend-ment 1
XZ
TC 110 Industrial trucks
ISO 22879:2016
* Castors and wheels — Requirements for castors for furniture
B
ISO 22880:2016
* Castors and wheels — Requirements for castors for swivel chairs
B
ISO 22882:2016
* Castors and wheels — Requirements for castors for hospital beds
B
ISO 3691-3:2016
Industrial trucks — Safety requirements and verification — Part 3: Additional requirements for trucks with elevating operator position and trucks specifi-cally designed to travel with elevated loads
C
TC 121 Anaesthetic and respiratory equipment
ISO 19054:2005/Amd 1:2016
Rail systems for supporting medical equipment — Amendment 1
XZ
TC 122 Packaging
ISO 18616-1:2016
* Transport packaging — Reusable, rigid plastic distribution boxes — Part 1: General purpose application
C
ISO 18616-2:2016
* Transport packaging — Reusable, rigid plastic distribution boxes — Part 2: General specifications for testing
B
ISO 19709-1:2016
* Transport packaging — Small load container systems — Part 1: Common requirements and test methods
C
TC 126 Tobacco and tobacco products
ISO 19290:2016
Cigarettes — Determination of tobacco specific nitrosamines in mainstream cigarette smoke — Method using LC-MS/MS
C
TC 127 Earth-moving machinery
ISO/TS 15143-3:2016
* Earth-moving machinery and mobile road construction machinery — Work-site data exchange — Part 3: Telemat-ics data
G
TC 130 Graphic technology
ISO 12647-7:2016
* Graphic technology — Process control for the production of halftone colour separations, proof and production prints — Part 7: Proofing processes working directly from digital data
D
ISO 16762:2016
* Graphic technology — Post-press — General requirements for transfer, handling and storage
C
TC 131 Fluid power systems
ISO 9974-4:2016
Connections for general use and fluid power — Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing — Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs
B
TC 135 Non-destructive testing
ISO 9934-1:2016
Non-destructive testing — Magnetic particle testing — Part 1: General principles
C
ISO Update, Supplement to ISO Focus -- December 2016 15
TC 138 Plastics pipes, fittings and valves for the transport of fluids
ISO/TS 17902:2016
* Wrapped electrofoaming joints for polyethylene (PE) piping systems with smooth outer wall for gravity drains and sewers
C
TC 142 Cleaning equipment for air and other gases
ISO 16890-1:2016
* Air filters for general ventilation — Part 1: Technical specifications, require-ments and classification system based upon particulate matter efficiency (ePM)
E
ISO 16890-2:2016
* Air filters for general ventilation — Part 2: Measurement of fractional efficiency and air flow resistance
G
ISO 16890-3:2016
* Air filters for general ventilation — Part 3: Determination of the gravimetric efficiency and the air flow resistance versus the mass of test dust captured
D
ISO 16890-4:2016
* Air filters for general ventilation — Part 4: Conditioning method to determine the minimum fractional test efficiency
B
TC 146 Air quality
ISO 18466:2016
* Stationary source emissions — De-termination of the biogenic fraction in CO2 in stack gas using the balance method
D
ISO 20581:2016
* Workplace air — General requirements for the performance of procedures for the measurement of chemical agents
C
TC 147 Water quality
ISO 13165-3:2016
Water quality — Radium-226 — Part 3: Test method using coprecipitation and gamma-spectrometry
C
ISO 14189:2013
Water quality — Enumeration of Clostridium perfringens — Method us-ing membrane filtration
B
ISO 10253:2016
Water quality — Marine algal growth inhibition test with Skeletonema sp. and Phaeodactylum tricornutum
D
TC 149 Cycles
ISO 4210-4:2014
Cycles — Safety requirements for bicy-cles — Part 4: Braking test methods
E
TC 150 Implants for surgery
ISO 5832-7:2016
Implants for surgery — Metallic materials — Part 7: Forgeable and cold-formed cobalt-chromium-nickel-molybdenum-iron alloy
A
ISO 7199:2016 * Cardiovascular implants and artificial organs — Blood-gas exchangers (oxygenators)
C
ISO 21535:2007/Amd 1:2016
Non-active surgical implants — Joint replacement implants — Specific requirements for hip-joint replacement implants — Amendment 1
XZ
TC 156 Corrosion of metals and alloys
ISO 12696:2016
Cathodic protection of steel in concrete
F
TC 160 Glass in building
ISO 16293-4:2016
* Glass in building — Basic soda lime silicate glass products — Part 4: Wired patterned glass
B
ISO 16293-5:2016
* Glass in building — Basic soda lime silicate glass products — Part 5: Pat-terned glass
B
ISO 16932:2016
Glass in building — Destructive-wind-storm-resistant security glazing — Test and classification
D
TC 163 Thermal performance and en-ergy use in the built environment
ISO 18523-1:2016
* Energy performance of buildings — Schedule and condition of building, zone and space usage for energy calculation — Part 1: Non-residential buildings
H
ISO 16957:2016
Measurement of apparent thermal conductivity of wet porous building materials by a periodic method
D
TC 164 Mechanical testing of metals
ISO 12135:2016
* Metallic materials — Unified method of test for the determination of quasistatic fracture toughness
H
TC 165 Timber structures
ISO 18402:2016
Timber structures — Structural insu-lated panel roof construction — Test methods
D
TC 171 Document management applications
ISO 19444-1:2016
* Document management — XML Forms Data Format — Part 1: Use of ISO 32000-2 (XFDF 3.0)
G
TC 172 Optics and photonics
ISO 14490-7:2016
* Optics and photonics — Test methods for telescopic systems — Part 7: Test methods for limit of resolution
B
ISO 9344:2016 * Microscopes — Graticules for eyepieces
A
TC 178 Lifts, escalators and moving walks
ISO/TR 22201-3:2016
* Lifts (elevators), escalators and moving walks — Programmable electronic systems in safety related applications — Part 3: Life cycle guideline for pro-grammable electronic systems related to PESSRAL and PESSRAE
B
TC 184 Automation systems and integration
ISO 8000-61:2016
* Data quality — Part 61: Data quality management: Process reference model
D
16 ISO Update, Supplement to ISO Focus -- December 2016
ISO/TS 10303-1310:2014
* Industrial automation systems and integration — Product data representa-tion and exchange — Part 1310: Ap-plication module: Draughting element
B
TC 189 Ceramic tile
ISO 10545-13:2016
Ceramic tiles — Part 13: Determination of chemical resistance
B
TC 193 Natural gas
ISO 23874:2006
Natural gas — Gas chromatographic requirements for hydrocarbon dew-point calculation
D
TC 194 Biological and clinical evaluation of medical devices
ISO 10993-6:2016
Biological evaluation of medical de-vices — Part 6: Tests for local effects after implantation
E
TC 204 Intelligent transport systems
ISO 13140-1:2016
* Electronic fee collection — Evaluation of on-board and roadside equipment for conformity to ISO 13141 — Part 1: Test suite structure and test purposes
F
ISO 13140-2:2016
* Electronic fee collection — Evaluation of on-board and roadside equipment for conformity to ISO 13141 — Part 2: Abstract test suite
C
ISO 13143-1:2016
* Electronic fee collection — Evaluation of on-board and roadside equipment for conformity to ISO 12813 — Part 1: Test suite structure and test purposes
G
ISO 13143-2:2016
* Electronic fee collection — Evaluation of on-board and roadside equipment for conformity to ISO 12813 — Part 2: Abstract test suite
C
TC 206 Fine ceramics
ISO 22197-1:2016
* Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for air-purification performance of semiconducting photocatalytic materials — Part 1: Removal of nitric oxide
C
TC 207 Environmental management
ISO 14034:2016
Environmental management — Envi-ronmental technology verification (ETV)
D
TC 210 Quality management and cor-responding general aspects for medical devices
ISO 15223-1:2016
Medical devices — Symbols to be used with medical device labels, label-ling and information to be supplied — Part 1: General requirements
D
ISO 80369-6:2016
Small bore connectors for liquids and gases in healthcare applications — Part 6: Connectors for neuraxial applications
F
TC 211 Geographic information/Geomatics
ISO 19110:2016
* Geographic information — Methodol-ogy for feature cataloguing
G
ISO/TS 19157-2:2016
* Geographic information — Data quality — Part 2: XML schema implementation
D
TC 213 Dimensional and geometrical product specifications and verification
ISO 16610-31:2016
Geometrical product specifications (GPS) — Filtration — Part 31: Robust profile filters: Gaussian regression filters
B
TC 215 Health informatics
ISO/TS 16843-1:2016
* Health informatics — Categorial struc-tures for representation of acupuncture — Part 1: Acupuncture points
E
ISO 21549-7:2016
* Health informatics — Patient health-card data — Part 7: Medication data
F
TC 217 Cosmetics
ISO 22716:2007
* Cosmetics — Good Manufacturing Practices (GMP) — Guidelines on Good Manufacturing Practices
D
TC 218 Timber
ISO 13061-13:2016
Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 13: Determination of radial and tangential shrinkage
A
ISO 13061-14:2016
Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 14: Determi-nation of volumetric shrinkage
A
TC 219 Floor coverings
ISO 20253:2016
Textile floor coverings — Blade test — Flocked textile floor covering
A
TC 224 Service activities relating to drinking water supply systems and wastewater systems - Qual-ity criteria of the service and performance indicators
ISO 24516-1:2016
Guidelines for the management of assets of water supply and wastewa-ter systems — Part 1: Drinking water distribution networks
F
TC 229 Nanotechnologies
ISO/TR 18196:2016
* Nanotechnologies — Measurement technique matrix for the characteriza-tion of nano-objects
G
ISO/TR 18637:2016
* Nanotechnologies — Overview of available frameworks for the develop-ment of occupational exposure limits and bands for nano-objects and their aggregates and agglomerates (NOAAs)
G
TC 268 Sustainable cities and communities
ISO 37100:2016
* Sustainable cities and communities — Vocabulary
A
TC 269 Railway applications
ISO Update, Supplement to ISO Focus -- December 2016 17
ISO/TR 21245-1:2016
* Railway applications — Rail project planning process — Part 1: Stakehold-ers and their needs/interests
C
CASCO Committee on conformity assessment
ISO/IEC 17021-2:2016
* Conformity assessment — Require-ments for bodies providing audit and certification of management systems — Part 2: Competence requirements for auditing and certification of environ-mental management systems
B
ISO/IEC TS 17021-9:2016
Conformity assessment — Require-ments for bodies providing audit and certification of management systems — Part 9: Competence requirements for auditing and certification of anti-bribery management systems
A
JTC 1 Information technology
ISO/IEC 9594-8:2014/Cor 3:2016
* Information technology — Open Systems Interconnection — The Direc-tory — Part 8: Public-key and attribute certificate frameworks — Technical Corrigendum 3
free
ISO/IEC TS 24748-6:2016
* Systems and software engineering — Life cycle management — Part 6: System integration engineering
E
ISO/IEC/IEEE 29119-5:2016
* Software and systems engineering — Software testing — Part 5: Keyword-Driven Testing
G
ISO/IEC 7816-8:2016
* Identification cards — Integrated circuit cards — Part 8: Commands and mechanisms for security operations
F
ISO/IEC TR 15067-3-2:2016
* Information technology — Home Elec-tronic System (HES) application model — Part 3-2: GridWise interoperability context-setting framework
F
ISO/IEC 18370-1:2016
* Information technology — Security techniques — Blind digital signatures — Part 1: General
E
ISO/IEC 19592-1:2016
* Information technology — Security techniques — Secret sharing — Part 1: General
B
ISO/IEC 27011:2016
* Information technology — Security techniques — Code of practice for Information security controls based on ISO/IEC 27002 for telecommunications organizations
E
ISO/IEC 27050-1:2016
* Information technology — Security techniques — Electronic discovery — Part 1: Overview and concepts
D
ISO/IEC 14496-4:2004/Amd 45:2016
* Information technology — Coding of audio-visual objects — Part 4: Conformance testing — Amendment 45: Conformance Testing for the Multi-resolution Frame Compatible Stereo Coding with Depth Maps Extension of AVC
XZ
ISO/IEC 14496-26:2010/Amd 4:2016
* Information technology — Coding of audio-visual objects — Part 26: Audio conformance — Amendment 4: AAC Additional Multichannel Conformance Data
XZ
ISO/IEC 21000-22:2016
* Information technology — Multimedia framework (MPEG-21) — Part 22: User Description
H
ISO/IEC 23008-3:2015/Amd 4:2016
* Information technology — High ef-ficiency coding and media delivery in heterogeneous environments — Part 3: 3D audio — Amendment 4: Carriage of system data
XZ
ISO/IEC 18305:2016
* Information technology — Real time lo-cating systems — Test and evaluation of localization and tracking systems
G
ISO/IEC 9541-1:2012/Amd 1:2016
* Information technology — Font infor-mation interchange — Part 1: Architec-ture — Amendment 1
E
ISO/IEC 19788-3:2011/Amd 1:2016
* Information technology — Learning, education and training — Metadata for learning resources — Part 3: Basic ap-plication profile — Amendment 1
E
ISO/IEC 19794-6:2011/Amd 2:2016
* Information technology — Biometric data interchange formats — Part 6: Iris image data — Amendment 2: XML encoding and clarification of defects
XZ
ISO/IEC TR 20913:2016
* Information technology — Data centres — Guidelines on holistic investiga-tion methodology for data centre key performance indicators
C
ISO/IEC 30105-1:2016
* Information technology — IT Enabled Services-Business Process Outsourc-ing (ITES-BPO) lifecycle processes — Part 1: Process reference model (PRM)
D
ISO/IEC 30105-2:2016
* Information technology — IT Enabled Services-Business Process Outsourc-ing (ITES-BPO) lifecycle processes — Part 2: Process assessment model (PAM)
H
ISO/IEC 30105-3:2016
* Information technology — IT Enabled Services-Business Process Outsourc-ing (ITES-BPO) lifecycle processes — Part 3: Measurement framework (MF) and organization maturity model (OMM)
D
ISO/IEC 30105-4:2016
* Information technology — IT Enabled Services-Business Process Outsourc-ing (ITES-BPO) lifecycle processes — Part 4: Terms and concepts
D
ISO/IEC 30105-5:2016
* Information technology — IT Enabled Services-Business Process Outsourc-ing (ITES-BPO) lifecycle processes — Part 5: Guidelines
F
Standards confirmed
The following International Standards are confimred for a five year period:
TC 2 Fasteners
ISO 7092:2000 (reconfirmed)
TC 4 Rolling bearings
ISO 246:2007 (reconfirmed)
ISO 12043:2007 (reconfirmed)
18 ISO Update, Supplement to ISO Focus -- December 2016
ISO 355:2007 (reconfirmed)
TC 6 Paper, board and pulps
ISO 3034:2011
ISO/TS 17958:2013
TC 22 Road vehicles
ISO 3888-2:2011
ISO 6312:2010
ISO 7401:2011
ISO 8349:2002 (reconfirmed)
ISO 10392:2011
ISO 12021:2010
ISO 14793:2011
ISO 14794:2011
ISO 16333:2011
ISO 17288-1:2011
ISO 17288-2:2011
ISO 21995:2008 (reconfirmed)
ISO/TS 22240:2008
(reconfirmed)
TC 23 Tractors and machinery for agriculture and forestry
ISO 8524:1986 (reconfirmed)
ISO 10626:1991 (reconfirmed)
ISO 13440:1996 (reconfirmed)
TC 28 Petroleum products and related prod-ucts of synthetic or biological origin
ISO 3771:2011
ISO 3987:2010
ISO 7536:1994 (reconfirmed)
ISO 16591:2010
ISO 20846:2011
ISO 20884:2011
TC 34 Food products
ISO 6632:1981 (reconfirmed)
ISO 6661:1983 (reconfirmed)
ISO 6662:1983 (reconfirmed)
ISO 6664:1983 (reconfirmed)
ISO 6822:1984 (reconfirmed)
ISO 6949:1988 (reconfirmed)
ISO 7466:1986 (reconfirmed)
ISO 7558:1988 (reconfirmed)
ISO 7561:1984 (reconfirmed)
ISO 7920:1984 (reconfirmed)
ISO 8683:1988 (reconfirmed)
ISO 9376:1988 (reconfirmed)
ISO 4134:1999 (reconfirmed)
ISO 13496:2000 (reconfirmed)
ISO 2253:1999 (reconfirmed)
ISO 5565-2:1999 (reconfirmed)
TC 38 Textiles
ISO 105-E05:2010
ISO 105-F07:2001 (reconfirmed)
ISO 105-J05:2007 (reconfirmed)
ISO 3759:2011
ISO 9865:1991 (reconfirmed)
ISO 10528:1995 (reconfirmed)
TC 44 Welding and allied processes
ISO 9692-2:1998 (reconfirmed)
ISO 10882-2:2000 (reconfirmed)
TC 45 Rubber and rubber products
ISO 4664-1:2011
ISO/TS 17796:2013
ISO 24453:2008 (reconfirmed)
ISO 24454:2008 (reconfirmed)
TC 51 Pallets for unit load method of materi-als handling
ISO 8611-1:2011
ISO 8611-2:2011
ISO 8611-3:2011
ISO 12777-1:1994 (reconfirmed)
TC 61 Plastics
ISO 458-1:1985 (reconfirmed)
ISO 458-2:1985 (reconfirmed)
ISO 19252:2008 (reconfirmed)
ISO 10840:2008 (reconfirmed)
ISO 11907-2:1995 (reconfirmed)
TC 67 Materials, equipment and offshore structures for petroleum, petrochemi-cal and natural gas industries
ISO 28460:2010
TC 84 Devices for administration of medicinal products and catheters
ISO/PAS 18761:2013
TC 96 Cranes
ISO 11660-1:2008 (reconfirmed)
ISO 11660-3:2008 (reconfirmed)
TC 98 Bases for design of structures
ISO 21650:2007 (reconfirmed)
TC 104 Freight containers
ISO 830:1999 (reconfirmed)
TC 121 Anaesthetic and respiratory equipment
ISO 26825:2008 (reconfirmed)
TC 130 Graphic technology
ISO 12040:1997 (reconfirmed)
TC 146 Air quality
ISO 7934:1989
TC 160 Glass in building
ISO 14438:2002 (reconfirmed)
ISO 16940:2008
ISO 22897:2003 (reconfirmed)
TC 171 Document management applications
ISO 19005-2:2011
TC 172 Optics and photonics
ISO 17123-3:2001 (reconfirmed)
TC 194 Biological and clinical evaluation of medical devices
ISO 10993-7:2008
TC 213 Dimensional and geometrical product specifications and verification
ISO 8062-3:2007 (reconfirmed)
ISO Update, Supplement to ISO Focus -- December 2016 19
ISO 10360-1:2000 (reconfirmed)
ISO 14406:2010
TC 215 Health informatics
ISO/TS 19844:2015
ISO 21549-8:2010
TC 274 Light and lighting
ISO 11664-2:2007 (reconfirmed)
JTC 1 Information technology
ISO/IEC 9797-1:2011
ISO/IEC 9797-2:2011
ISO/IEC 10118-4:1998
(reconfirmed)
Standards withdrawn
Period from 01 November to 30 November 2016
TC 8 Ships and marine technology
ISO/PAS 19697:2014
(replaced by ISO 19697:2016)
TC 29 Small tools
ISO 2730:1973 (replaced by )
TC 34 Food products
ISO 1840:1976 (replaced by )
TC 41 Pulleys and belts (including veebelts)
ISO 3870:1976 (replaced by )
TC 79 Light metals and their alloys
ISO 2377:1972 (replaced by )
TC 108 Mechanical vibration, shock and condi-tion monitoring
ISO 1940-1:2003 (replaced by ISO 21940-11:2016)
ISO 7919-1:1996 (replaced by ISO 20816-1:2016)
ISO 10816-1:1995 (replaced by ISO 20816-1:2016)
ISO 10816-1:1995/Amd 1:2009
(replaced by ISO 20816-1:2016)
TC 131 Fluid power systems
ISO 3938:1986 (replaced by )
TC 142 Cleaning equipment for air and other gases
ISO/TS 21220:2009
(replaced by ISO 16890-1:2016, ISO 16890-2:2016, ISO 16890-3:2016, ISO 16890-4:2016)
TC 150 Implants for surgery
ISO 13779-1:2008 (replaced by )
TC 204 Intelligent transport systems
ISO/TS 13140-1:2011
(replaced by ISO 13140-1:2016)
ISO/TS 13140-2:2012
(replaced by ISO 13140-2:2016)
ISO/TS 13143-1:2011
(replaced by ISO 13143-1:2016)
ISO/TS 13143-2:2011
(replaced by ISO 13143-2:2016)
TC 213 Dimensional and geometrical product specifications and verification
ISO/TS 16610-31:2010
(replaced by ISO 16610-31:2016)
TC 218 Timber
ISO 4469:1981 (replaced by ISO 13061-13:2016)
ISO 4858:1982 (replaced by ISO 13061-14:2016)
TC 226 Materials for the production of primary aluminium
ISO/TS 14423:1999
(replaced by )
ISO/TS 14425:1999
(replaced by )
CASCO Committee on conformity assessment
ISO/IEC TS 17021-2:2012
(replaced by ISO/IEC 17021-2:2016)
Meeting calendar
(update at 01 November 2016)
Meetings called for the month of October are not in this edition.
* Information definite but meeting not yet formally convened
** Provisional
December 2016
5-9 Sydney (Australia)
TC 217 Cosmetics
6-8 Lübeck (Germany)
TC 121/SC 2 Anaesthetic and res-piratory equipment/Airways and related equipment
6-9 Rio de Janeiro (Brazil)
PC 277 Sustainable procurement
6-9 Dublin (Ireland) TC 275 Sludge recovery, recycling, treatment and disposal
8 Clearwater (USA) TC 83/SC 5 Sports and other recreational facilities and equipment/Ice hockey equipment and facilities
8-9 Egmond aan Zee (Netherlands)
TC 197 Hydrogen technologies
9 Beijing (China) TC 34/SC 6 Food products/Meat, poultry, fish, eggs and their products
9 Berlin (Germany) TC 44/SC 6 Welding and allied processes/Resistance welding and allied mechanical joining
13-14 Geneva (Switzerland)
COUNCIL Council
14-15 Milan (Italy) * TC 17/SC 17 Steel/Steel wire rod and wire products
15-16 Erlangen (Germany)
TC 184/SC 1 Automation systems and integration/Physi-cal device control
20 ISO Update, Supplement to ISO Focus -- December 2016
2nd Semester 2016
(China) ** TC 160/SC 1 Glass in build-ing/Product considerations
January 2017
13 Virtual (Unknown)
TC 44/SC 12 Welding and allied processes/Soldering materials
16-20 Sydney (Australia)
TC 121/SC 3 Anaesthetic and res-piratory equipment/Lung ventilators and related equipment
17-20 Tokyo (Japan) TC 107 Metallic and other inorganic coatings
19 Tokyo (Japan) * TC 107/SC 3 Metallic and other inorganic coatings/Electrodeposited coatings and related finishes
19 Tokyo (Japan) ** TC 107/SC 4 Metallic and other inorganic coatings/Hot dip coatings (galvanized, etc.)
19 Tokyo (Japan) TC 107/SC 7 Metallic and other inorganic coatings/Corrosion tests
24-25 Cochin (India) TC 34/SC 7 Food products/Spic-es, culinary herbs and condiments
January-February 2017
30-10 St. Petersburg, Florida (USA)
TC 213 Dimensional and geometrical product specifications and verification
February 2017
2 Tuscaloosa (USA)
TC 261 Additive manufacturing
6-10 Tunis (Tunisia) ** JTC 1/SC 6 Information technol-ogy/Telecommunica-tions and information exchange between systems
6-10 Berlin (Germany) ** JTC 1/SC 35 Information technol-ogy/User interfaces
6-12 Pretoria (South Africa)
TC 58/SC 4 Gas cylinders/Opera-tional requirements for gas cylinders
14 Geneva (Switzerland)
* CSC/SPC Council/Strategy and Policy Committee (CSC/SPC)
15 Geneva (Switzerland)
President's committee
President's committee
17 Galveston (USA) TC 304 Healthcare administration
20 Berlin (Germany) TC 188/SC 1 Small craft/Personal safety equipment
20-22 London (United Kingdom)
* TC 8/SC 8 Ships and marine technology/Ship design
21-22 Kuala Lumpur (Malaysia)
** TMB Technical Manage-ment Board
22-24 Paris (France) TC 147/SC 3 Water qual-ity/Radioactivity measurements
24 Vancouver (Canada)
* TC 22/SC 41 Road vehicles/Spe-cific aspects for gase-ous fuels
24-26 St. John, Newfoundland (Canada)
TC 121/SC 4 Anaesthetic and res-piratory equipment/Terminology and semantics
Budapest (Hungary)
** TC 267 Facility management
March 2017
6 Kyoto (Japan) TC 60 Gears
6 Kyoto (Japan) TC 60/SC 1 Gears/Nomenclature and wormgearing
6 Kyoto (Japan) TC 60/SC 2 Gears/Gear capacity calculation
7-8 Coventry (United Kingdom)
TC 44/SC 14 Welding and allied processes/Weld-ing and brazing in aerospace
14 Geneva (Switzerland)
President's committee
President's committee
15 Geneva (Switzerland)
CSC/FIN Council/Council Standing Committee on Finance (CSC/FIN)
15-16 London (United Kingdom)
* TC 94 Personal safety -- Protective clothing and equipment
16-17 Geneva (Switzerland)
COUNCIL Council
20-24 Leeds (United Kingdom)
* TC 94/SC 13 Personal safety -- Protective clothing and equipment/Pro-tective clothing
27-31 Chengdu (China) * JTC 1/SC 38 Information technol-ogy/Cloud Comput-ing and Distributed Platforms
28 Toronto (Canada) * TC 23/SC 4 Tractors and machin-ery for agriculture and forestry/Tractors
29 Virtual (Unknown)
* TC 20/SC 17 Aircraft and space vehicles/Airport infrastructure
29 Toronto (Canada) TC 23/SC 2 Tractors and machin-ery for agriculture and forestry/Common tests
29 Philadelphia (USA)
* TC 219 Floor coverings
30 Toronto (Canada) * TC 23/SC 7 Tractors and machin-ery for agriculture and forestry/Equipment for harvesting and conservation
30 Pau (France) TC 67/SC 3 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Drilling and comple-tion fluids, and well cements
30-31 Toronto (Canada) * TC 23/SC 3 Tractors and machin-ery for agriculture and forestry/Safety and comfort
April 2017
3-4 Chicago (USA) TC 117 Fans
3-7 Stockholm (Sweden)
* TC 118 Compressors and pneumatic tools, ma-chines and equipment
ISO Update, Supplement to ISO Focus -- December 2016 21
3-7 Stockholm (Sweden)
* TC 118/SC 3 Compressors and pneumatic tools, machines and equip-ment/Pneumatic tools and machines
3-7 Stockholm (Sweden)
* TC 118/SC 6 Compressors and pneumatic tools, machines and equip-ment/Air compressors and compressed air systems
3-7 London (United Kingdom)
* TC 133 Clothing sizing sys-tems - size designa-tion, size measure-ment methods and digital fittings
6 Stockholm (Sweden)
* TC 118/SC 4 Compressors and pneumatic tools, machines and equip-ment/Compressed air treatment technology
10 Guilin (China) ** TC 29/SC 8 Small tools/Tools for pressing and moulding
17-21 Hangzhou (China)
TC 215 Health informatics
22-26 Faro, Algarve (Portugal)
* TC 282/SC 2 Water reuse/Water reuse in urban areas
24-25 Hamilton (New Zealand)
* JTC 1/SC 27 Information tech-nology/IT Security techniques
24-28 (USA) ** TC 198 Sterilization of health care products
24-28 Jeju (Korea, Republic of)
* TC 292 Security and resilience
26 London (United Kingdom)
* TC 67/SC 2 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Pipeline transporta-tion systems
26-27 Vancouver (Canada)
* CASCO Committee on con-formity assessment
27 Frankfurt (Germany)
* TC 23/SC 19 Tractors and machin-ery for agriculture and forestry/Agricultural electronics
27 Virtual (Unknown)
* TC 67/SC 9 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Liquefied natural gas installations and equipment
Toulouse (France)
** TC 31/SC 5 Tyres, rims and valves/Agricultural tyres and rims
Toulouse (France)
** TC 31/SC 6 Tyres, rims and valves/Off-the-road tyres and rims
Toulouse (France)
** TC 31/SC 7 Tyres, rims and valves/Industrial tyres and rims
Orlando (USA) ** TC 34/SC 2 Food products/Ole-aginous seeds and fruits and oilseed meals
Orlando (USA) ** TC 34/SC 11 Food products/Animal and vegetable fats and oils
(Unknown) ** TC 34/SC 15 Food products/Coffee
(Côte-d'Ivoire) ** TC 34/SC 18 Food products/Cocoa
May 2017
3 Virtual (Unknown)
* TC 22/SC 31 Road vehicles/Data communication
7-12 Oslo (Norway) TC 184/SC 4 Automation systems and integration/Indus-trial data
8 San Antonio (USA)
* TC 131 Fluid power systems
8 Berlin (Germany) * TC 171/SC 1 Document manage-ment applications/Quality, preserva-tion and integrity of information
8-11 Madrid (Spain) * TC 272 Forensic sciences
8-12 Stockholm (Sweden)
* TC 10 Technical product documentation
8-12 (Netherlands) ** TC 35 Paints and varnishes
8-12 Vienna (Austria) * TC 39/SC 2 Machine tools/Test conditions for metal cutting machine tools
8-12 Seoul (Korea, Republic of)
* TC 161 Controls and protec-tive devices for gas and/or oil
8-12 Berlin (Germany) ** TC 171 Document manage-ment applications
11 Stockholm (Sweden)
* TC 10/SC 1 Technical product documentation/Basic conventions
11 Winterthur (Switzerland)
* TC 131/SC 4 Fluid power systems/Connectors and similar products and components
11 Winterthur (Switzerland)
* TC 131/SC 6 Fluid power systems/Contamination control
15 Stockholm (Sweden)
* TC 29/SC 9 Small tools/Tools with defined cutting edges, cutting items
15-18 (USA) ** TC 85/SC 5 Nuclear energy, nuclear technolo-gies, and radiological protection/Nuclear in-stallations, processes and technologies
15-19 Washington, D.C (USA)
* TC 4 Rolling bearings
15-19 Washington, D.C (USA)
* TC 4/SC 7 Rolling bearings/Spherical plain bearings
15-19 Washington, D.C (USA)
* TC 4/SC 8 Rolling bearings/Load ratings and life
15-19 Seattle (USA) * TC 31 Tyres, rims and valves
15-19 Seattle (USA) * TC 31/SC 3 Tyres, rims and valves/Passenger car tyres and rims
15-19 Seattle (USA) * TC 31/SC 10 Tyres, rims and valves/Cycle, moped, motorcycle tyres and rims
15-19 Copenhagen (Denmark)
* TC 43 Acoustics
15-19 Copenhagen (Denmark)
* TC 43/SC 1 Acoustics/Noise
15-19 Copenhagen (Denmark)
* TC 43/SC 2 Acoustics/Building acoustics
15-19 Rio de Janeiro (Brazil)
TC 68 Financial services
22 ISO Update, Supplement to ISO Focus -- December 2016
16 San Antonio (USA)
* TC 131/SC 7 Fluid power systems/Sealing devices
18 Busan (Korea, Republic of)
* TC 67/SC 5 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Casing, tubing and drill pipe
18-19 Kuala Lumpur (Malaysia)
COPOLCO Committee on con-sumer policy
22-23 Faro, Algarve (Portugal)
** TC 282/SC 3 Water reuse/Risk and performance evalu-ation of water reuse systems
22-26 Pretoria (South Africa)
* TC 46/SC 4 Information and documentation/Tech-nical interoperability
22-26 Pretoria (South Africa)
* TC 46/SC 11 Information and doc-umentation/Archives/records management
22-26 Boston (USA) ** TC 121 Anaesthetic and res-piratory equipment
22-26 (USA) ** TC 121/SC 1 Anaesthetic and res-piratory equipment/Breathing attach-ments and anaes-thetic machines
22-26 Washington, D.C (USA)
* TC 193/SC 1 Natural gas/Analysis of natural gas
22-26 (Panama) ** TC 228 Tourism and related services
23-25 (Japan) ** TC 8/SC 1 Ships and marine technology/Lifesaving and fire protection
25-26 Hannover (Germany)
* TC 184/SC 5 Automation systems and integration/Inter-operability, integra-tion, and architec-tures for enterprise systems and automa-tion applications
29-30 Tokyo (Japan) TC 24/SC 4 Particle charac-terization includ-ing sieving/Particle characterization
(Japan) ** JTC 1/SC 32 Information technolo-gy/Data management and interchange
Stockholm (Sweden)
** TC 10/SC 6 Technical product documentation/Me-chanical engineering documentation
Stockholm (Sweden)
** TC 10/SC 8 Technical prod-uct documenta-tion/Construction documentation
(Sweden) ** TC 29 Small tools
Berlin (Germany) ** TC 44/SC 3 Welding and allied processes/Welding consumables
Berlin (Germany) ** TC 44/SC 10 Welding and allied processes/Quality management in the field of welding
Berlin (Germany) ** TC 44/SC 11 Welding and allied processes/Qualifica-tion requirements for welding and allied processes personnel
(Unknown) ** TC 226 Materials for the production of primary aluminium
May-June 2017
27-2 (Ireland) ** TC 238 Solid biofuels
29-2 Okayama (Japan)
* JTC 1/SC 40 Information tech-nology/IT Service Management and IT Governance
29-2 Stockholm (Sweden)
* TC 211 Geographic in-formation/Geomatics
31-2 Delft (Netherlands)
* TC 145 Graphical symbols
June 2017
4-5 (Japan) ** TC 299 Robotics
5-9 Colorado Springs (USA)
** TC 23/SC 18 Tractors and machin-ery for agriculture and forestry/Irrigation and drainage equipment and systems
5-9 (Unknown) ** TC 268 Sustainable cities and communities
5-9 (Unknown) ** TC 268/SC 1 Sustainable cities and communities/Smart community infrastructures
6-9 Jeju (Korea, Republic of)
** TC 156 Corrosion of metals and alloys
6-9 Delft (Netherlands)
** TC 274 Light and lighting
7-8 Düsseldorf (Germany)
TC 17/SC 10 Steel/Steel for pres-sure purposes
7-9 (USA) ** TC 220 Cryogenic vessels
8-9 Cambridge (Unit-ed Kingdom)
* TC 67/SC 7 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Offshore structures
9 Chicago (USA) * TC 136 Furniture
12-16 Paris (France) * TC 20/SC 14 Aircraft and space ve-hicles/Space systems and operations
13 Geneva (Switzerland)
* CSC/SPC Council/Strategy and Policy Committee (CSC/SPC)
14-15 Geneva (Switzerland)
** TMB Technical Manage-ment Board
15-22 London (United Kingdom)
* JTC 1/SC 28 Information technol-ogy/Office equipment
16 Geneva (Switzerland)
* CSC/SPC Council/Strategy and Policy Committee (CSC/SPC)
19 (South Africa) ** PC 305 Sustainable non-sewered sanitation systems
19-20 Stockholm (Sweden)
* TC 22/SC 32 Road vehicles/Elec-trical and electronic components and gen-eral system aspects
19-20 Stockholm (Sweden)
** TC 184 Automation systems and integration
19-23 Tokyo (Japan) ** TC 34/SC 9 Food products/Microbiology
19-23 Cape Town (South Africa)
* TC 69 Applications of statis-tical methods
ISO Update, Supplement to ISO Focus -- December 2016 23
19-23 Cape Town (South Africa)
* TC 69/SC 1 Applications of statis-tical methods/Termi-nology and symbols
19-23 Cape Town (South Africa)
* TC 69/SC 4 Applications of statistical methods/Applications of statistical methods in product and process management
19-23 Cape Town (South Africa)
* TC 69/SC 6 Applications of statis-tical methods/Meas-urement methods and results
19-23 Cape Town (South Africa)
* TC 69/SC 7 Applications of statistical methods/Applications of statistical and related techniques for the implementation of Six Sigma
19-23 Cape Town (South Africa)
* TC 69/SC 8 Applications of sta-tistical methods/Ap-plication of statistical and related methodol-ogy for new technol-ogy and product development
19-23 London (United Kingdom)
TC 108/SC 5 Mechanical vibration, shock and condition monitoring/Condition monitoring and diag-nostics of machine systems
19-23 (Portugal) ** TC 149/SC 1 Cycles/Cycles and major sub-assemblies
23-30 (Australia) ** JTC 1/SC 36 Information tech-nology/Information technology for learn-ing, education and training
26-30 Shanghai (China) TC 29/SC 10 Small tools/Assem-bly tools for screws and nuts, pliers and nippers
26-30 London (United Kingdom)
* TC 94/SC 4 Personal safety -- Protective clothing and equipment/Personal equipment for protection against falls
26-30 Washington, D.C (USA)
* TC 193 Natural gas
26-30 Washington, D.C (USA)
* TC 193/SC 3 Natural gas/Upstream area
27-28 Qingdao (China) President's committee
President's committee
27-29 Paignton (United Kingdom)
* TC 8/SC 2 Ships and marine technology/Ma-rine environment protection
Tokyo (Japan) * JTC 1/SC 34 Information tech-nology/Document description and pro-cessing languages
(USA) ** TC 42 Photography
Chennai (India) ** TC 120 Leather
2nd Quarter 2017
(Korea, Repub-lic of)
** TC 6 Paper, board and pulps
Tsukuba (Japan) ** TC 92 Fire safety
(India) ** TC 113 Hydrometry
(Unknown) ** TC 190/SC 3 Soil quality/Chemi-cal methods and soil characteristics
Paris (France) * TC 297 Waste management, recycling and road operation service
July 2017
3-7 Harbin (China) * TC 44/SC 7 Welding and allied processes/Represen-tation and terms
3-7 Harbin (China) * TC 44/SC 9 Welding and allied processes/Health and safety
7 Milan (Italy) ** TC 206 Fine ceramics
22 Turin (Italy) * JTC 1/SC 29 Information technol-ogy/Coding of audio, picture, multimedia and hypermedia information
24-28 Paris (France) * JTC 1/SC 35 Information technol-ogy/User interfaces
August 2017
14-15 London (United Kingdom)
* JTC 1/SC 22 Information technol-ogy/Programming languages, their envi-ronments and system software interfaces
24-25 Braunschweig (Germany)
* TC 172/SC 6 Optics and photonics/Geodetic and survey-ing instruments
28 Virtual (Unknown)
CSC/FIN Council/Council Standing Committee on Finance (CSC/FIN)
September 2017
4-8 Berlin (Germany) * TC 21 Equipment for fire protection and fire fighting
11-15 San Francisco (USA)
* JTC 1/SC 38 Information technol-ogy/Cloud Comput-ing and Distributed Platforms
11-15 Bologna (Italy) * TC 23/SC 6 Tractors and machin-ery for agriculture and forestry/Equipment for crop protection
11-15 Gaithersburg (USA)
* TC 108 Mechanical vibration, shock and condition monitoring
11-15 Gaithersburg (USA)
* TC 108/SC 6 Mechanical vibration, shock and condition monitoring/Vibration and shock generating systems
17 Berlin (Germany) President's committee
President's committee
17-22 Seoul (Korea, Republic of)
* TC 61 Plastics
17-22 Seoul (Korea, Republic of)
* TC 164 Mechanical testing of metals
18 Berlin (Germany) * COUNCIL Council
18-20 London (United Kingdom)
* TC 290 Online reputation
19 Berlin (Germany) * DEVCO Committee on devel-oping country matters
19 London (United Kingdom)
* TC 41/SC 3 Pulleys and belts (including veebelts)/Conveyor belts
24 ISO Update, Supplement to ISO Focus -- December 2016
19 Berlin (Germany) ** TMB Technical Manage-ment Board
20 London (United Kingdom)
* TC 41/SC 1 Pulleys and belts (including veebelts)/Friction
20-21 Seoul (Korea, Republic of)
* TC 221 Geosynthetics
20-22 Berlin (Germany) ** GA General Assembly
21 London (United Kingdom)
* TC 41/SC 4 Pulleys and belts (including veebelts)/Synchronous belt drives
21-22 Berlin (Germany) * TC 22/SC 31 Road vehicles/Data communication
21-23 London (United Kingdom)
** TC 201 Surface chemical analysis
22 London (United Kingdom)
* TC 41 Pulleys and belts (including veebelts)
25-28 Penang (Malaysia)
* TC 157 Non-systemic con-traceptives and STI barrier prophylactics
25-29 (Unknown) ** TC 58/SC 2 Gas cylinders/Cylin-der fittings
25-29 Florence (Italy) * TC 146/SC 1 Air quality/Stationary source emissions
25-29 (Europe) ** TC 146/SC 6 Air quality/Indoor air
25-29 Tokyo (Japan) * TC 205 Building environment design
25-29 Berlin (Germany) * TC 232 Learning services outside formal education
25-29 Stockholm (Sweden)
* TC 300 Solid recovered fuels
26-28 London (United Kingdom)
** TC 17/SC 17 Steel/Steel wire rod and wire products
26-30 San José, Cali-fornia (USA)
* JTC 1/SC 2 Information technol-ogy/Coded character sets
27 Düsseldorf (Germany)
* TC 44/SC 13 Welding and allied processes/Braz-ing materials and processes
28 (Italy) ** TC 39/SC 4 Machine tools/Wood-working machines
29 Virtual (Unknown)
TC 20/SC 17 Aircraft and space vehicles/Airport infrastructure
29 Berlin (Germany) ** TC 254 Safety of amusement rides and amusement devices
London (United Kingdom)
** JTC 1/SC 22 Information technol-ogy/Programming languages, their envi-ronments and system software interfaces
(Japan) ** TC 20/SC 1 Aircraft and space vehicles/Aerospace electrical requirements
(Australia) ** TC 27 Solid mineral fuels
(Australia) ** TC 27/SC 1 Solid mineral fuels/Coal preparation: Terminology and performance
(Australia) ** TC 27/SC 3 Solid mineral fuels/Coke
(Australia) ** TC 27/SC 4 Solid mineral fuels/Sampling
(Australia) ** TC 27/SC 5 Solid mineral fuels/Methods of analysis
Erlangen (Germany)
** TC 36 Cinematography
Copenhagen (Denmark)
** TC 58/SC 2 Gas cylinders/Cylin-der fittings
Tel Aviv (Israel) ** TC 59/SC 17 Buildings and civil en-gineering works/Sus-tainability in buildings and civil engineering works
Sapporo (Japan) ** TC 71 Concrete, reinforced concrete and pre-stressed concrete
(Europe) ** TC 146/SC 3 Air quality/Ambient atmospheres
Vienna (Austria) ** TC 165 Timber structures
(Nigeria) ** TC 260 Human resource management
Kuala Lumpur (Malaysia)
** TC 267 Facility management
3rd Quarter 2017
(Unknown) ** TC 190 Soil quality
(Unknown) ** TC 190/SC 4 Soil quality/Biological methods
Beijing (China) ** TC 289 Brand evaluation
Vienna (Austria) ** TC 289 Brand evaluation
October 2017
2-7 Vladivostok (Russian Federation)
* JTC 1 Information technology
5-6 Madrid (Spain) * TC 119 Powder metallurgy
8 New Orleans (USA)
* TC 38 Textiles
9-10 Xian (China) * TC 135/SC 9 Non-destructive test-ing/Acoustic emission testing
9-13 New Delhi (India) ** TC 178 Lifts, escalators and moving walks
10-13 Berlin (Germany) ** TC 153 Valves
11 New Orleans (USA)
* TC 38/SC 1 Textiles/Tests for coloured textiles and colorants
11 New Orleans (USA)
* TC 38/SC 2 Textiles/Cleansing, finishing and water resistance tests
11 Vienna (Austria) * TC 83/SC 4 Sports and other rec-reational facilities and equipment/Snows-ports equipment
11-13 London (United Kingdom)
* TC 59/SC 8 Buildings and civil engineering works/Sealants
12 New Orleans (USA)
* TC 38/SC 23 Textiles/Fibres and yarns
12 New Orleans (USA)
* TC 38/SC 24 Textiles/Condition-ing atmospheres and physical tests for textile fabrics
16 Seoul (Korea, Republic of)
* TC 194 Biological and clinical evaluation of medical devices
16-20 Berlin (Germany) * TC 2 Fasteners
16-20 Berlin (Germany) * TC 2/SC 7 Fasteners/Reference standards
ISO Update, Supplement to ISO Focus -- December 2016 25
16-20 Berlin (Germany) * TC 2/SC 11 Fasteners/Fasteners with metric external thread
16-20 Berlin (Germany) * TC 2/SC 12 Fasteners/Fasteners with metric internal thread
16-20 Berlin (Germany) * TC 2/SC 14 Fasteners/Surface coatings
16-20 Tokyo (Japan) * TC 111 Round steel link chains, chain slings, components and accessories
16-20 Tokyo (Japan) * TC 111/SC 1 Round steel link chains, chain slings, components and ac-cessories/Chains and chain slings
17-18 Qingdao (China) * TC 31/SC 9 Tyres, rims and valves/Valves for tube and tubeless tyres
17-19 Hangzhou (China)
** TC 264 Fireworks
18-19 Hangzhou (China)
* TC 105 Steel wire ropes
20 Virtual (Unknown)
President's committee
President's committee
20 Tokyo (Japan) * TC 111/SC 3 Round steel link chains, chain slings, components and accessories/Components and accessories
23-26 Brussels (Belgium)
** TC 146/SC 2 Air quality/Workplace atmospheres
23-26 Brussels (Belgium)
** TC 146/SC 4 Air quality/General aspects
23-27 (China) ** TC 39/SC 2 Machine tools/Test conditions for metal cutting machine tools
23-27 Hawaii (USA) * TC 45 Rubber and rubber products
23-27 Sydney (Australia)
TC 209 Cleanrooms and as-sociated controlled environments
(Unknown) ** TC 28/SC 2 Petroleum products and related products of synthetic or bio-logical origin/Meas-urement of petroleum and related products
Washington, D.C (USA)
** TC 34/SC 16 Food products/Hori-zontal methods for molecular biomarker analysis
Pretoria (South Africa)
** TC 59/SC 2 Buildings and civil engineering works/Terminology and harmonization of languages
Dallas (USA) ** TC 59/SC 13 Buildings and civil engineering works/Organization of information about construction works
Pretoria (South Africa)
** TC 59/SC 15 Buildings and civil engineering works/Framework for the description of hous-ing performance
Pretoria (South Africa)
** TC 59/SC 18 Buildings and civil en-gineering works/Con-struction procurement
Milan (Italy) ** TC 86/SC 7 Refrigeration and air-conditioning/Test-ing and rating of com-mercial refrigerated display cabinets
(Unknown) ** TC 190/SC 1 Soil quality/Evaluation of criteria, terminol-ogy and codification
Xian (China) ** TC 244 Industrial furnaces and associated pro-cessing equipment
October-November 2017
30-3 London (United Kingdom)
* TC 98 Bases for design of structures
November 2017
6 (United Kingdom)
** TC 215 Health informatics
7-8 Marseille (France)
* TC 5/SC 2 Ferrous metal pipes and metallic fittings/Cast iron pipes, fit-tings and their joints
8-9 Berlin (Germany) * TC 70/SC 8 Internal combus-tion engines/Ex-haust gas emission measurement
8-10 Manila (Philippines)
* TC 123 Plain bearings
10 Berlin (Germany) * TC 70 Internal combustion engines
20 Geneva (Switzerland)
* CSC/SPC Council/Strategy and Policy Committee (CSC/SPC)
21 Geneva (Switzerland)
CSC/FIN Council/Council Standing Committee on Finance (CSC/FIN)
(India) ** TC 54 Essential oils
(Korea, Repub-lic of)
** TC 184/SC 4 Automation systems and integration/Indus-trial data
Bangkok (Thailand)
** TC 227 Springs
(Australia) ** TC 292 Security and resilience
(China) ** TC 309 Organizational governance
December 2017
(Unknown) ** TC 291 Domestic gas cook-ing appliances
4th Quarter 2017
(China) ** TC 34/SC 4 Food products/Cere-als and pulses
Month unknown 2017
(North America) ** JTC 1/SC 24 Information technol-ogy/Computer graph-ics, image processing and environmental data representation
(South Africa) ** TC 46 Information and documentation
(China) ** TC 301 Energy management and energy savings
February 2018
12 (Sweden) ** TC 58 Gas cylinders
26 ISO Update, Supplement to ISO Focus -- December 2016
12-18 (Sweden) ** TC 58/SC 4 Gas cylinders/Opera-tional requirements for gas cylinders
March 2018
22-23 Geneva (Switzerland)
** COUNCIL Council
1st Quarter 2018
(Netherlands) ** JTC 1/SC 35 Information technol-ogy/User interfaces
April 2018
(USA) ** TC 67/SC 7 Materials, equipment and offshore struc-tures for petroleum, petrochemical and natural gas industries/Offshore structures
Edinburgh (Unit-ed Kingdom)
** TC 147 Water quality
June 2018
Daegu (Korea, Republic of)
** JTC 1/SC 36 Information tech-nology/Information technology for learn-ing, education and training
(Norway) ** TC 292 Security and resilience
September 2018
10-11 Toronto (Canada) * JTC 1/SC 22 Information technol-ogy/Programming languages, their envi-ronments and system software interfaces
24 Geneva (Switzerland)
** COUNCIL Council
26-28 Geneva (Switzerland)
** GA General Assembly
Vienna (Austria) ** TC 5 Ferrous metal pipes and metallic fittings
Philadelphia (USA)
** TC 28 Petroleum products and related products of synthetic or bio-logical origin
(Japan) ** TC 61 Plastics
(Mexico) ** TC 201 Surface chemical analysis
3rd Quarter 2018
(Japan) ** JTC 1/SC 35 Information technol-ogy/User interfaces
Tokyo (Japan) ** TC 17 Steel
Santander (Spain)
** TC 92 Fire safety
Sao Paulo (Brazil)
** TC 135 Non-destructive testing
October 2018
1-2 The Hague (Netherlands)
** TC 209 Cleanrooms and as-sociated controlled environments
Beijing (China) ** TC 59 Buildings and civil engineering works
(China) ** TC 59/SC 13 Buildings and civil engineering works/Organization of information about construction works
(Malaysia) ** TC 215 Health informatics
Month unknown 2018
(Europe) ** JTC 1/SC 24 Information technol-ogy/Computer graph-ics, image processing and environmental data representation
Zhuhai (China) ** JTC 1/SC 28 Information technol-ogy/Office equipment
(Canada) ** TC 23/SC 6 Tractors and machin-ery for agriculture and forestry/Equipment for crop protection
(Unknown) ** TC 34 Food products
(China) ** TC 45 Rubber and rubber products
(USA) ** TC 94/SC 13 Personal safety -- Protective clothing and equipment/Pro-tective clothing
(China) ** TC 94/SC 14 Personal safety -- Protective clothing and equipment/Firefighters' personal equipment
Milan (Italy) ** TC 161 Controls and protec-tive devices for gas and/or oil
Buenos Aires (Argentina)
** TC 228 Tourism and related services
(Unknown) ** TC 276 Biotechnology
(Mexico) ** TC 301 Energy management and energy savings
May 2019
20-24 (Japan) ** TC 121 Anaesthetic and res-piratory equipment
June 2019
Beijing (China) ** JTC 1/SC 36 Information tech-nology/Information technology for learn-ing, education and training
Month unknown 2019
(Asia) ** JTC 1/SC 24 Information technol-ogy/Computer graph-ics, image processing and environmental data representation
Month unknown 2020
(North America) ** JTC 1/SC 24 Information technol-ogy/Computer graph-ics, image processing and environmental data representation