Upload
nguyenkhanh
View
216
Download
0
Embed Size (px)
Citation preview
BUREAU OFCUSTOMS
ISO 9001:2000CERTIFIED
SECURITIES ANDEXCHANGE
COMMISSION
BOARD OFINVESTMENTS
Company Name : Nakayama Technology Corporation
President : YOSHIMI NAKAYAMA
Year Established : 2001
Products/Services : Bricks and Granite Wall Panels Studs and Runners Computer Graphics Simulation Other IT Services
Manufacturing Plant : Davao del Sur, Philippines
Lot Area : 753,088 sq. ft. (430,336 sq. ft. Occupied)
No. of Employees : 1,010 Workers
Production Capacity : 12,000 square feet/day
Bank : Metropolitan Bank & Trust Company Digos City, Philippines
Mizuho Corporate Bank, LTD. 26th Floor, Citibank Tower, Valero St. Corner Villar Street, Salcedo Village, Makati City, Metro Manila, Philippines
Business Type : Exporter / Manufacturer
Industry Focus : Wall Panel System
Future markets : Worldwide
Mother Company : Nakayama Jyuutaku Co., Ltd 3-4-4, Izumidai, Ageo City, Saitama Pref. 362-0062, JapanTel. # : 81-048-770-5225Fax # : 81-048-770-52231
Website :
COMPANY PROFILE
Recognized by:
www.nkym.com.ph
The NAKAYAMA CO., LTD., was first established in August 1990, as the NAKAYAMA TOSO KOGYO. Since then, we have always tried to customize our operations in terms of products and services, to cater to the immediate needs of the local communities. So, we have tried to established and have in fact created, a sense of reliability and dependability with our customers with the use of quality products and services.
When our company was founded, we started with only five(5) members. But due to the support of our customers, we have grown, and is growing with a web of branches in all areas of Japan. In fact, at present, we are already operating our business with a manpower of 1300 employees. In the process of our growth, our jobs have been transformed from mere painting jobs, specifically exterior painting jobs, towards the renovation of houses and all kinds of buildings. In the same aspect, the demands of our market have been drastically evolving from the simple tasks of remodeling and repair of "old fashioned" houses and buildings, into the more complicated task of improving houses and transform them into modern and comfortable abodes to cope with the demands of the present and of the future, which must naturally breathe of comfort and style.
Our maiden overseas manufacturing plant in the Philippines, the NAKAYAMA TECHNOLOGY CORPORATION (NTC), started to manufacture new wall panel system called the EcoWall Series from the last quarter of 2003. A variety of brick tile models, consistent with its durability and elegance, are produced in high quantity daily. The unique and genuine composition of our products comes from natural stones and minerals. At present, our products are already highly competitive, not only in Japan but also in the Philippines. In December 2004, NTC passed the TUV SUD accreditation and is now an ISO 9001:2000 certified. In line with our quality management objectives, all our officers, employees and staff, possessed with all the necessary qualifications, are working as a team to improve our products and our services with the end in view of expanding our market towards the United States, United Kingdom, and to all other parts of the world.
Message to Customers
YOSHIMI NAKAYAMAPresident
PRODUCT INFORMATION
CORAL YELLOW
CORAL BEIGE
CORAL BROWN
CORAL GRAY
VINTAGE YELLOW
BAIRIN RED
BAIRIN YELLOW
VINTAGE RED
VINTAGE BROWN
CORAL SERIES
VINTAGE SERIES
BAIRIN SERIES
CORNER PANEL FULL PANEL
CORNER PANEL FULL PANEL
CORNER PANEL FULL PANEL
PRODUCT INFORMATIONPOLISHED GRANITE
GRANITE BRICK MIX
CORNER PANEL FULL PANEL
CORNER PANEL FULL PANEL
POLISHED GRANITE 603
POLISHED GRANITE 664
POLISHED GRANITE BLACK
POLISHED GRANITE GREEN
POLISHED GRANITE RED
GRANITE BRICK MIX 001
GRANITE BRICK MIX 002
GRANITE BRICK MIX 003
GRANITE BRICK MIX 004
PRODUCT INFORMATION
OB LIGHT STEEL BLUE
OB DARK INDIAN RED
OB SADDLE BROWN
OB DARK SALMON
EU LIGHT SKY BLUE
EU SEA GREEN
EU CUSTARD YELLOW
OB SERIES
EURO SERIES
CORNER PANEL FULL PANEL
CORNER PANEL FULL PANEL
PRODUCT DIMENSION
Panel Weight = 30.86 lbsPanel Length = 5.95 ftPanel Thickness = 3/4 inchPanel Width = 16inches
1414 FEATURES OF
11 CORROSION RESISTANTStrong / Sturdy
Other products use steel plates with thickness of 0.00027m NTC products use steel plates with thickness of 0.00030m
Galvalume (alumininum zinc alloy coated sheet) AZ150, a corrosion resistant metal is used in the panels with increased thickness, which made it superior as a foundation metal siding. Furthermore, strength and durability is increased by the addition of urethane foam in the panel.
22 THERMAL RESISTANTStrong / Sturdy
How much Insulation do you need? Insulation is rated by its R-Value. This is a measure of its thermal resistance or how well it holds back warm or cool air. The higher the R-Value, the lesser energy you use. R-Value is directly proportional to the insulation's thickness, but it also depends on the type of material and density used.
Chemical coating
55% Aluminum plating45% Zinc
IRON (Fe)
Recommended R-Value for an Energy Saving Structure
EcoWALL Exterior Wall Panel System
96.26oF59.18
o
FSide wall
R-11 to R-18
AtticR-38 to R-44
BasementR-10 to R-19
2X4 wooden stud
4"
2"
1/2" Gypsum Board (Drywall)R-Value 0.45
Rock Wool BlownR-Value 3.03/in = 12.12
EcoWALL Panel SidingR-Value 5.11
3/4" PlywoodR-Value 0.94
TYPICAL WOODEN WALL SYSTEM
EcoWALL System total R-Value
Ideal R-Value for wall : R11-R18
NO. COMPONENTS LOCATION R-VALUE1 1/2" Gypsum Board (Drywall)
Rockwool Blown (Wall)
3/4" Plywood
EcoWall
Total
Interior 0.45
12.12
0.945.11
18.62
Between Studs
Exterior
Exterior Finish
2
3
4
The sandwich structure of the panel, which is made up of the galvalume, poly-urethane foam and aluminum foil demonstrates the outstanding high sound insulation nature of the panel.
33 HIGH SOUND INSULATION PERFORMANCE
Strong / Sturdy
EcoWALL SERIES
EXISTING WALL(1000Hz)
(Fire examination)
EcoWALL house siding series is made up of strong non- flammable or incombustible materials. Damage due to fire is reduced to minimum. It passed a 30-minute fire resistance test conducted by the fire authority in Japan.
44 FIRE RESISTANT
Strong / Sturdy
Approved by Fire Department of JAPAN.
PERMIT NUMBERPC030BE-0491
90 db 17 db
During earthquake, the siding is flexible enough to just bend and sway with the movement of the ground.
FORCE
EcoWallmortar
FORCE
Stainless Panel Clips exclusive for EcoWALL
T-JoinerStainless Clip Stud Stainless Clip
(Studs connecting edge) (Panel connecting edge)
EDGE
Silicon rubber is used to seal the connecting sides of one panel to another. Silicon rubber is durable seal that is not easily degraded by weather exposure. It protects the connecting sides of the panels.
3000 hours weather exposure test
Ordinary sealSilicon seal
55 FLEXIBLE JOINTS
Strong / Sturdy
This device is adopted to prevent the penetration of the rainwater and air through the connecting edges.66 AIR AND WATER TIGHT JOINTS
Strong / Sturdy
During earthquake, the lateral movement of the structure which produces cracks in conventional concrete or mortar finished walls can be eliminated by introducing the stainless clip specially designed for EcoWALL. It allows the wall panel to sway sideways thus eliminating cracks and deformation on the wall surface.
ALC・MORTAR・RC
NORMAL EXTERIOR WALL
NATURAL MARBLE
FINE QUALITY BRICK TILE
POLISHED FINE NATURAL GRANITE
KIND OF PRODUCTS Absorptivity Rate Result
Failed Failed FailedPassedPassed
15~30%20~28%6~10%
0.5~0.9%0.09~0.39%
Weather exposure test result
1000 2000 3000 4000 5000
The rate of glossy ability maintenanceReal tile and natural granite stone
100
75
50
25
00
Time when degradation starts
Time of repaint period
Acrylicsseries paint
Urithane series paint
Silicon series paint
Flouride series paint
HARUSUHybrid paint
It becomes a progress standard of about 3 years for 1000 Hours.
Fine Quality Brick Tile
Weather resistant comparison of a fine quality brick tile
Fine Quality Brick Tile Ordinary tile
3000 hours weather exposure test
Actual Loading test shows the panel system can resist equivalent wind pressure of 312mph or sustained load of 44psi (2,115Pa).
77 WIND RESISTANT
Strong / Sturdy
The damaged due to frost or molds during the winter and rainy season can be eliminated because polished bricks and tiles water absorption is low. Table below shows Brick Tile absorption rate less than 1%.
88 LOW ABSORPTIONStrong / Sturdy
MFmaintenancefree
A cavity is created between Panel and Studs to prevent the dew condensation inside the wall. Air circulates between the siding of the wall, therefore, preventing dew condensation inside of the body of the wall. It becomes an improvement of the insulating effect of the whole wall system.
99 DEW CONDENSATION PREVENTION EFFICIENCYStrong / Sturdy
The lightweight design of the panel does not give burden to the wall of the building, thus, raising its lightweight conversion efficiency.
1010 LIGHTWEIGHT ADVANTAGELight
1111 DESIGN CHARACTERISTIC AND MAINTENANCE FREE PROPERTYBeautiful
The design of the EcoWALL panel series comes in different fashion and style to suite the growing demand for futuristic appearance of exterior walls. It is also maintenance free because it is washable. Dirt and dust is easy to remove by water spray.
EcoWALLORDINARY
WEIGHT COMPARISON A. ORDINARY GRANITE 154.32lbs B. EcoWALL GRANITE PANEL 41.44lbs
C. ORDINARY BRICK TILE 59.52lbs D. EcoWALL BRICK 32.62lbs
Easily washable with water
154.32lbs
59.52lbs
41.44lbs
32.62lbs
160.0
50.0
0(lbs)
Wall material weight per meter
120.0
60.0
30.0
A. ORDINARY GRANITE C. ORDINARY BRICK TILEB. FINE GRANITE D.FINE BRICK TILE
NANO TECHNOLOGYNANO TECHNOLOGY
All EcoWALL series can be cleaned by spraying water
1313 FAST AND EASY INSTALLATIONEasy
1414 HIGH STRENGTH BOND (HEAVY DUTY GLUE)
1212 FREE GRAPHIC SIMULATIONEasy
It's difficult to choose the color and design for the house and building. As part of the company's genuine service, a digital photograph of the house will be taken and will be sent to the Computer Graphics Center for simulation of the desired color and design pattern ordered by the client/ customer. The preview of the color and the designed pattern would be easy for the customer to see and to choose.
The bond strength of the glue/adhessive between brick/granite and galvalume backing panel is set at 0.5KN per 16 sq. cm. area.
With the new breakthrough and patented way of installation, the process is easy, fast and efficient. And because of this new technology there is an air circulation created between siding and wall of the house, therefore raising the efficiency of the insulating effect of the siding. And with the new installation method, the siding panel is not prone to damage due to earthquake. The new method of installation is environment friendly since it does not provide so much material like wood. The method directly applies the studs and runners on the wall. Therefore, there is no need to remove the outer part of the wall, saving time and materials.
Computer Graphics Center
Bond Strength Test Machine
Strong / Sturdy
YOU CAN SEE THE PREVIEW FOR FREE
INSTALLATION ACCESSORIES...INSTALLATION ACCESSORIES...
1 2 3a
3b 4 5
MAIN ANGLE ACCESSORIES
1 2 45 3a 3b
INSTALLATION ACCESSORIES...INSTALLATION ACCESSORIES...
T-JOINER (granite) CN-0112 3,000mm
3,000mm aluminum
aluminum
CN-0113T-JOINER (brick)
STARTER CN-0114 3,030mm aluminum
L- Adaptor (black) CN-0116-K 3,030mm aluminumL- Adaptor (white) SY-0116-W 3,030mm aluminumL- Adaptor (bronze) CN-0116-BR 3,030mm aluminum
Y- Adaptor (black) CN-0120-K 3,030mm aluminum
SY-0120-W3,030mm aluminum
Y- Adaptor (white)
CN-0120-BR
3,030mm aluminumCN-0121-K
3,030mm aluminumY- Adaptor (bronze)
SY-0121-W3,030mm aluminum
CN-0121-BR 3,030mm aluminum
T-JOINER Clip
CN-0304
60x35mm sus304
STUD Clip
CN-0305
34.6x30mm sus304
CORNER Clip CN-0306 30x35mm sus304
Screw 50 PH-101 50mm galvanized sheet Screw 60 SY-0107 60mm galvanized sheet Screw 70 SY-0108 70mm galvanized sheet
SILICONE RUBBER (bricks) SE-0400-DG 9mm siliconeSILICONE RUBBER (granite) SE-0400-G,K,YB,RB 11mm silicone
PLASTIC SPACER 2 LCP-2LCP-3
2mm plasticPLASTIC SPACER 1 LCP-1 1.1mm plastic
PLASTIC SPACER 3 5mm plastic
NTC-101STUD 3,000mm galvalume
NTC-102RUNNER (single) 2,730mm galvalume
NTC-103RUNNER (double) 2,730mm galvalume
FLAT Screw SY-0105 16mm chromium coatings
L- Adaptor Cover (black) CN-0119-K 45x45mm aluminumL- Adaptor Cover (white) SY-0119-W 45x45mm aluminumL- Adaptor Cover (bronze) CN-0119-BR 45x45mm aluminum
CODEPRODUCT NAME SIZE MATERIAL
ur IT service firm the Computer Graphics Center, engineers plan and building designs as part of the company's support systems extending from the regional framework to its building blocks. A preview of how an old house will appear after its renovation using our wall panels will be presented in less than 24 hours, taking into the consideration the clients taste and our recommendations.
SERVICES...SERVICES...
From a digital photograph taken of existing houses and other buildings, a simulation of the desired wall panel will be made complete with a choice of colors and patterns.
s designers, the graphics artist will provide a series of choices of our products with matching colors and designs to assist the client
to explore the latest concepts in architectural innovations with our wall panels.
With the building plan and its perspective as submitted by the client, our Computer Graphics Center, can do 3D designs of fully instal led wall panels in your homes.
FACTORYFACTORY
SALES DIRECTORYSALES DIRECTORY
NAKAYAMA TECHNOLOGY CORPORATION PHILIPPINESNAKAYAMA TECHNOLOGY CORPORATION PHILIPPINES
We Study, We Create, We Produce, We Install....Our Policy is Customer's Satisfaction...
JAPAN CUSTOMERJAPAN CUSTOMER OTHER COUNTRIESOTHER COUNTRIES US, MEXICO, CANADA, EUROPEUS, MEXICO, CANADA, EUROPE
FOREIGN REPRESENTATIVESFOREIGN REPRESENTATIVESNAKAYAMA JAPANNAKAYAMA JAPAN
MANUFACTURED BY NAKAYAMA TECHNOLOGY CORPORATIONBrgy. Cogon, Diversion Road, Digos City
Davao del Sur, Philippines 8002Tel: (082) 553-8703Fax: (082) 553-8546
Website: www.nkym.com.phContact e-mail:[email protected]
Authorized Distributor
NAKAYAMA