Product Name ISA Member Price Affiliate Member Price Community
Member/List Price ISA-RP2.1-1978 - Manometer Tables $48.00 $54.00
$60.00 Presents abbreviations and fundamental conversion factors
commonly used in manometry, recommended definitions of pressure in
terms of a column of merc... more ANSI/ISA-5.1-2009 -
Instrumentation Symbols and Identification $120.00 $135.00 $150.00
This widely used standard establishes a uniform means of depicting
and identifying instruments or devices and their inherent
functions, instrumentatio... more ISA-TR5.1.01 -
ISA-TR77.40.01-2012 - Functional Diagram Usage $48.00 $54.00 $60.00
This technical report is to expand on and illustrate usage of
function block symbols and functions and to prepare examples in
development of complex f... more ISA-5.2-1976 (R1992) - Binary
Logic Diagrams For Process Operations $48.00 $54.00 $60.00 Provides
symbols for binary operating functions. Intended to symbolize the
binary operating functions of a system in a manner that can be
applied to a... more ISA-5.3-1983 - Graphic Symbols for Distributed
Control/Shared Display Instrumentation, Logic, and Computer Systems
$48.00 $54.00 $60.00 This standard satisfies the requirements for
symbolically representing the functions of distributed
control/shared display instrumentat... more ISA-5.4-1991 -
Instrument Loop Diagrams $48.00 $54.00 $60.00 This standard
establishes minimum required information and identifies additional
optional information for a loop diagram for an individ... more
ISA-5.5-1985 - Graphic Symbols for Process Displays $60.00 $67.50
$75.00 The standard is suitable for use in the chemical, petroleum,
power generation, air conditioning, metal refining, and numerous
other ind... more ANSI/ISA-5.06.01-2007 - Functional Requirements
Documentation for Control Software Applications $72.00 $81.00
$90.00 Covers real-time batch, discrete and continuous process
automation systems. Defines regulatory, event-driven and
time-driven control system actio... more ISA-7.0.01-1996 - Quality
Standard for Instrument Air $88.00 $99.00 $110.00 The scope of this
Standard is to provide limits for moisture content in instrument
quality air; to provide limits for... more ANSI/ISA-12.00.02-2009
(R2014) - Certificate Standard for AEx Equipment for Hazardous
(Classified) Locations $40.00 $45.00 $50.00 This standard defines
minimum elements and format for certificates for AEx equipment to
align with those for the IECEx Certificate of Conformity... more
ANSI/ISA-12.01.01-2013 - Definitions and Information Pertaining to
Electrical Equipment in Hazardous (Classified) Locations $120.00
$135.00 $150.00 This document provides definitions and information
pertaining to protection techniques, terminology, and the
installation of electrical equipment in h... more ISA-TR12.2-1995 -
Intrinsically Safe System Assessment Using the Entity Concept
$40.00 $45.00 $50.00 Provides information and examples for
assessing intrinsic safety of a wide variety of control loops using
the control drawings and the entity concept... more
ANSI/ISA-12.02.02-2014, Recommendations for the Preparation,
Content, and Organization of Intrinsic Safety Control Drawings
$40.00 $45.00 $50.00 Provides guidance in the preparation of
control drawings for intrinsically safe apparatus, associated
apparatus, and intrinsically safe systems. It is... more
ANSI/ISA-12.04.04-2012 - Pressurized Enclosures $48.00 $54.00
$60.00 This standard applies to equipment made suitable for use in
hazardous (classified) locations by pressurizing the use of a
pressurizing system. This... more ISA-RP12.06.01-2003 - Recommended
Practice for Wiring Methods for Hazardous (Classified) Locations
Instrumentation Part 1: Intrinsic Safety $72.00 $81.00 $90.00 This
recommended practice is intended to promote the uniform
installation of intrinsically safe systems for hazardous
(classified) locations. Informa... more ISA-12.10-1988 - Area
Classification in Hazardous (Classified) Dust Locations $40.00
$45.00 $50.00 This standard refers only to combustible mixtures
created by dusts such as agricultural, carbonaceous, plastic,
chemical, and metal d... more ANSI/ISA-12.12.01-2015 / CAN/CSA
C22.2 NO. 213-15, Nonincendive Electrical Equipment for Use in
Class I and II, Division 2 and Class III, Divisions 1 and 2
Hazardous (Classified) Locations $72.00 $81.00 $90.00 This standard
provides minimum requirements for the design, construction, and
marking of electrical equipment or parts of such equipment for use
in Cl... more ANSI/ISA-12.12.03-2011 - Standard for Portable
Electronic Products Suitable for Use in Class I and II, Division 2,
Class I Zone 2 and Class III, Division 1 and 2 Hazardous
(Classified) Locations $40.00 $45.00 $50.00 This standard provides
guidance for the use of selected general-purpose portable
electronic products in certain hazardous (classified) locations and
i... more ANSI/ISA-TR12.12.04-2011 - Electrical Equipment in a
Class I, Division 2/Zone 2 Hazardous Location $32.00 $36.00 $40.00
A location in which the fire or explosion hazard exists
infrequently and for short periods is designated as a Division 2 or
Zone 2 location. Two of t... more ANSI/ISA-TR12.13.01-1999 (R2013)
- Flammability Characteristics of Combustible Gases and Vapors
$88.00 $99.00 $110.00 Flammability Characteristics of Combustible
Gases and Vapors is reprinted in its entirety by permission of the
publisher, the Bureau of Mines,... more ANSI/ISA-TR12.13.02-1999
(R2013) - Investigation of Fire and Explosion Accidents in the
Chemical, Mining, and Fuel-Related Industries - A Manual by Kuchta
$88.00 $99.00 $110.00 Investigation of Fire and Explosion Accidents
in the Chemical, Mining, and Fuel-Related Industries - A Manual by
Kuchta, 1985 is reprinted in i... more ANSI/ISA-TR12.13.03-2009 -
Guide for Combustible Gas Detection as a Method of Protection
$40.00 $45.00 $50.00 Combustible gas detection used for process
safety management may also be used to provide protection from
explosion or fires by minimizing the possibil... more
ANSI/ISA-12.13.04-2007 (R2014) - Performance Requirements for Open
Path Combustible Gas Detectors $88.00 $90.00 $110.00 This standard
provides minimum requirements for fixed and transportable open path
gas detection apparatus. This standard specifies the construction,
p... more ANSI/ISA-12.20.01-2009 (R2014) - General Requirements for
Electrical Ignition Systems for Internal Combustion Engines in
Class I, Division 2 or Zone 2, Hazardous (Classified) Locations
$60.00 $67.50 $75.00 This standard is intended to enhance the
safety of personnel by providing minimum requirements for
electrical ignition systems for spark-ignited recip... more
ANSI/ISA-TR12.21.01-2004 (R2013) - Use of Fiber Optic Systems in
Class I Hazardous (Classified) Locations $60.00 $67.50 $75.00 This
technical report provides guidance on the safe use of fiber optic
systems and their constituent parts producing or guiding visible,
near infrared... more ISA-TR12.24.01-1998 - (IEC 60079-10 Mod) -
Recommended Practice for Classification of Locations for Electrical
Installations Classified as Class I, Zone 0, Zone 1, or Zone 2
$88.00 $99.00 $110.00 ISA-TR12.24.01 is concerned with the
classification of hazardous areas where flammable gas or vapor
risks may arise,... more ANSI/ISA-12.27.01-2011 - Requirements for
Process Sealing Between Electrical Systems and Flammable or
Combustible Process Fluids $60.00 $67.50 $75.00 This document
provides specific requirements for process sealing between
electrical systems and flammable or combustible process fluids
where a failur... more ISA-18.1-1979 - (R2004) - Annunciator
Sequences and Specifications $60.00 $67.50 $75.00 This Standard is
primarily for use with electrical annunciators that call attention
to abnormal process conditions by the use of indivi... more
ANSI/ISA-18.2-2009 - Management of Alarm Systems for the Process
Industries $144.00 $162.00 $180.00 This standard addresses the
development, design, installation, and management of alarm systems
in the process industries. Alarm system management incl... more
ISA-TR18.2.3-2015 - Basic Alarm Design $104.00 $117.00 $130.00 This
technical report addresses alarm systems for facilities in the
process industries to improve safety, quality, and productivity. In
the design stage, the alarm attributes are specified and designed
based on... more ISA-TR18.2.4-2012 - Enhanced and Advanced Alarm
Methods $104.00 $117.00 $130.00 This technical report provides
guidance on enhanced and advanced alarm methods and focuses on the
scope of Clause 12 of ISA-18.2. Enhanced alarm desig... more
ISA-TR18.2.5-2012 - Alarm System Monitoring, Assessment, and
Auditing $104.00 $117.00 $130.00 This technical report provides
guidance on monitoring, assessment and audit of alarms. TR5 focuses
on the scope of ANSI/ISA-18.02-2009 Clauses 16 and... more
ISA-TR18.2.6-2012 - Alarm Systems for Batch and Discrete Processes
$104.00 $117.00 $130.00 This technical report covers the
application of alarm management principles in ISA-18.2 to batch and
discrete processes. The general principles and te... more
ISA-20-1981 - Specification Forms for Process Measurement and
Control Instruments, Primary Elements, and Control Valves $104.00
$117.00 $130.00 Provides forms (checklist) to promote uniformity in
instrument specification, both in content and form, by listing and
providing space for principal d... more ISA-TR20.00.01-2007 -
Specification Forms for Process Measurement and Control Instruments
Part 1: General Considerations-Updated with 27 new specification
forms in 2004-2006 and updated with 11 new specification forms in
2007 $120.00 $135.00 $150.00 This updated standard includes an
expanded series of 51 Specification Forms developed in 2001,
augmented by 20 new forms developed in 2004-2006 and 11... more
ISA-20.00.03-2001 - Specification Forms for Process Measurement and
Control Instruments Part 3: Form Requirements and Development
Guidelines $32.00 $36.00 $40.00 This standard establishes
requirements for instrument specification forms to be published by
ISA. Its use is recommended for organizations that develo... more
ISA-RP31.1-1977 - Specification, Installation, and Calibration of
Turbine Flowmeters $32.00 $36.00 $40.00 Establishes minimum
ordering information; recommended acceptance, and qualification
test methods, including calibration techniques; uniform
terminolog... more ISA-37.1-1975 - (R1982) - Electrical Transducer
Nomenclature and Terminology $32.00 $36.00 $40.00 This Standard
covers transducers used in electrical and electronic measuring
systems. It is realized that this standard may not be whol... more
ISA-RP37.2-1982 - (R1995) - Guide for Specifications and Tests for
Piezoelectric Acceleration Transducers for Aerospace Testing $48.00
$54.00 $60.00 Covers piezoelectric acceleration transducers,
primarily those used in aerospace test instrumentation. Terminology
used in this document follows ISA-3... more ISA-37.3-1982 - (R1995)
- Specifications and Tests for Strain Gage Pressure Transducers
$48.00 $54.00 $60.00 Establishes uniform minimum specifications for
design and performance characteristics; uniform acceptance and
qualification test methods, including ca... more ISA-37.5-1982 -
(R1995) - Specifications and Tests for Strain Gage Linear
Acceleration Transducers $48.00 $54.00 $60.00 Establishes uniform
minimum specifications for design and performance characteristics;
uniform acceptance and qualification test methods including cal...
more ISA-37.6-1982 - (R1995) - Specifications and Tests for
Potentiometric Pressure Transducers $48.00 $54.00 $60.00
Establishes uniform minimum specifications for design and
performance characteristics; uniform acceptance and qualification
test methods, including ca... more ISA-37.8-1982 - (R1995) -
Specifications and Tests for Strain Gage Force Transducers $48.00
$54.00 $60.00 Outlines uniform general specifications, acceptance
and qualification methods, methods for data presentation, and
includes a drawing symbol used in el... more ISA-37.10-1982 -
(R1995) - Specifications and Tests for Piezoelectric Pressure and
Sound-Pressure Transducers $48.00 $54.00 $60.00 Establishes uniform
specifications for describing design and performance
characteristics, acceptance and qualification test methods, and
calibration t... more ISA-37.12-1982 - (R1995) - Specifications and
Tests for Potentiometric Displacement Transducers $48.00 $54.00
60.00 Covers potentiometric displacement transducers, primarily
those used in measuring systems. The specifications are not
intended to cover transducers us... more ISA-37.16.01-2002 - A
Guide for the Dynamic Calibration of Pressure Transducers $60.00
$67.50 $75.00 This standard covers dynamic pressure transducers,
which are, primarily "those" used in measurements... more
ISA-RP42.00.01-2001 - Nomenclature for Instrument Tube Fittings
$40.00 $45.00 $50.00 This recommended practice defines nomenclature
for tube fittings most commonly used in instrumentation. It is not
intended as a substitute for manufa... more ANSI/ISA-50.00.01-1975
(R2012) - Compatibility of Analog Signals for Electronic Industrial
Process Instruments $32.00 $36.00 $40.00 This document applies to
analog dc signals used in process control and monitoring systems to
transmit information between subsystems or separated elem... more
ISA-TR50.02, Parts 3 & 4-2000 - Fieldbus Standard for Use in
Industrial Control Systems, Parts 3 & 4: Technical Report for
Fieldbus Data Link Layer Tutorial $104.00 $117.00 $130.00 The
technical report is divided into two parts. Part A presents the
specific reasons why certain features in ISA's DLL documents...
more ISA-TR50.02, Part 9, 2000 - Fieldbus Standard for Use in
Industrial Control Systems: User Layer Technical Report $104.00
$117.00 $130.00 This technical report defines the details of the
field bus process control user layer for continuous and batch
process control applications, as well a... more ISA-51.1-1979 -
(R1993) - Process Instrumentation Terminology $72.00 $81.00 $90.00
Provides guidance for vendor/user understanding when referring to
product specifications, performance, and operating conditions. It
is primarily inten... more ISA-TR52.00.01-2006 - Recommended
Environments for Standards Laboratories $48.00 $54.00 $60.00 The
measured value assigned to a standard or measurement instrument has
the essential qualification that the assigned value was valid at
the specific... more ISA-RP60.1-1990 - Control Center Facilities
$32.00 $36.00 $40.00 This document is intended to be used as a
guide in the preparation of engineering designs and specifications
for control center facilit... more ISA-RP60.2-1995 - Control Center
Design Guide and Terminology $40.00 $45.00 $50.00 This document is
included as a guide to initiating, designing, specifying,
procuring, testing, accepting, and installing a control cent...
more ISA-RP60.3-1985 - Human Engineering for Control Centers $40.00
$45.00 $50.00 The intent of this recommended practice is to present
design concepts which are compatible with the physical and mental
capabilities of... more ISA-RP60.4-1990 - Documentation for Control
Centers $40.00 $45.00 $50.00 This recommended practice covers the
type, content, and extent of documentation required as record data
and information particular to a... more ISA-RP60.6-1984 -
Nameplates, Labels, and Tags for Control Centers $48.00 $54.00
$60.00 This recommended practice is intended to summarize
identification methods and to suggest the uses of nameplates,
labels, and tags. Exam... more ISA-RP60.8-1978 - Electrical Guide
for Control Centers $32.00 $36.00 $40.00 This document is intended
to assist the design engineer in establishing the electrical
requirements of a control center; it is also int... more
ISA-RP60.9-1981 - Piping Guide for Control Centers $32.00 $36.00
$40.00 This recommended practice is intended to assist the designer
or engineer in the definition of piping requirements for pneumatic
signals... more ISA-RP60.11-1991 - Crating, Shipping, and Handling
for Control Centers $48.00 $54.00 $60.00 This recommended practice
describes general crating methods available for protection against
physical damage, vibration, pilferage, and... more
ISA-67.01.01-2002 (R2007) - Transducer and Transmitter Installation
for Nuclear Safety Applications $48.00 $54.00 $60.00 This document
covers the installation of transducers for nuclear safety-related
applications. This document establishes requirements and
recommendatio... more ISA-67.02.01-2014 - Nuclear Safety-Related
Instrument Sensing Line Piping and Tubing Standard for Use in
Nuclear Power Plants $60.00 $68.00 $75.00 This Standard covers
design, protection, and installation of nuclear safety-related
instrument-sensing lines and sampling lines for nuc... more
ISA-67.03-1982 - Standard for Light Water Reactor Coolant Pressure
Boundary Leak Detection $40.00 $45.00 $50.00 This standard covers
identification and quantitative measurement of reactor coolant
system leakage in light water cooled power reactors... more
ANSI/ISA-67.04.01-2006 (R2011) - Setpoints for Nuclear
Safety-Related Instrumentation $35.00 $40.00 $45.00 This standard
defines the requirements for assessing, establishing, and
maintaining nuclear safety-related and other important instrument
setpoints as... more ISA-RP67.04.02-2010 - Methodologies for the
Determination of Setpoints for Nuclear Safety-Related
Instrumentation $144.00 $162.00 $180.00 This recommended practice
provides guidance for the implementation of ANSI/ISA-67.04.01- 2006
in the following areas: a) Methodologies, including... more
ISA-TR67.04.08-1996 - Setpoints for Sequenced Actions $48.00 $54.00
$60.00 This technical report provides guidance on the handling of
setpoints for sequenced actions in both nuclear safety-related and
nuclear p... more ISA-TR67.04.09-2005 - Graded Approaches to
Setpoint Determination $48.00 $54.00 $60.00 This technical report
provides guidance on a graded approach for calculating and
documenting channel and indication uncertainties as well as for
docum... more ISA-67.06.01-2002 - Performance Monitoring for
Nuclear Safety-Related Instrument Channels in Nuclear Power Plants
$60.00 $67.50 $75.00 This standard provides the nuclear power
industry methods for assuring that nuclear safety-related
instrument channels satisfy acceptable calibration,... more
ISA-67.14.01-2000 - Qualifications and Certification of
Instrumentation and Control Technicians in Nuclear Facilities
$40.00 $45.00 $50.00 This standard identifies the criteria for
certification of instrumentation and control technicians at nuclear
facilities. These criteri... more ISA-71.01-1985 - Environmental
Conditions for Process Measurement and Control Systems: Temperature
and Humidity $32.00 $36.00 $40.00 This standard covers temperature
and humidity environmental conditions for industrial process
measurement and control equipment. Specif... more ISA-71.02-1991 -
Environmental Conditions for Process Measurement and Control
Systems: Power $32.00 $36.00 $40.00 This standard classifies power
parameters that affect industrial process measurement and control
equipment. Specifications for other en... more ISA-71.03-1995 -
Environmental Conditions for Process Measurement and Control
Systems: Mechanical Influences $32.00 $36.00 $40.00 This standard
encompasses mechanical influences, specifically shock and
vibration, for industrial process measurement and control syste...
more ANSI/ISA-71.04-2013 - Environmental Conditions for Process
Measurement and Control Systems: Airborne Contaminants $125.00
$140.00 $155.00 This standard covers airborne contaminants and
biological influences that affect industrial process measurement
and control equipment, electronic offi... more ISA-RP74.01-1984 -
Application and Installation of Continuous-Belt Weighbridge Scales
$32.00 $36.00 $40.00 This recommended practice will provide an
effective base of comparison of scale suppliers, will establish
minimum values, and will ensur... more ANSI/ISA-75.01.01-2012
(60534-2-1 MOD) - Industrial-Process Control Valves - Part 2-1:
Flow capacity - Sizing equations for fluid flow under installed
conditions $292.00 $322.00 $352.00 ANSI/ISA-75.01.01-2012
(60534-2-1 MOD) includes equations for predicting the flow of
compressible and incompressible fluids through control valves....
more ANSI/ISA-75.02.01-2008 (IEC 60534-2-3 Mod) - Control Valve
Capacity Test Procedures $182.00 $197.00 $212.00 This test standard
utilizes the mathematical equations outlined in ANSI/ISA-75.01.01
(IEC 60534-2-1 Mod)-2007, Flow Equations... more
ISA-TR75.04.01-1998 (R2006) - Control Valve Position Stability
$32.00 $36.00 $40.00 This document discusses control valve stem
position mechanical stability and establishes a measurement
criterion for position instability of the valve... more
ANSI/ISA-75.05.01-2000 (R2005) - Control Valve Terminology $48.00
$54.00 $60.00 Scope: This standard contains terminology for control
valves. Purpose: To provide a glossary of definitions commonly used
in the c... more ISA-75.07-1997 - Laboratory Measurement of
Aerodynamic Noise Generated by Control Valves $32.00 $36.00 $40.00
Scope: This standard defines equipment, methods, and procedures for
the laboratory testing and measurement of airborne sound radiated
by a com... more ANSI/ISA-75.08.01-2002 (R2007) - Face-to-Face
Dimensions for Integral Flanged Globe-Style Control Valve Bodies
(Classes 125, 150, 250, 300, and 600) $32.00 $36.00 $40.00 This
standard applies to integral flanged globe-style control valves,
sizes 15 mm (1/2 inch) through 400 mm (16 inches), having top, top
and bottom, p... more ANSI/ISA-75.08.02-2003 (R2009) - Face-to-Face
Dimensions for Flanged and Flangeless Rotary Control Valves
(Classes 150, 300, and 600) $32.00 $36.00 $40.00 This standard
applies to flanged and flangeless rotary control valves using a
full ball or a segment of a ball and other rotary-stem control
valves, s... more ANSI/ISA-75.08.03-2001 (R2013) - Face-to-Face
Dimensions for Socket Weld-End and Screwed-End Globe-Style Control
Valves (Classes 150, 300, 600, 900, 1500, and 2500) $32.00 $36.00
$40.00 This standard applies to socket weld-end globe-style control
valves, sizes 1/2 inch (15 mm) through 4 inches (100 mm), and
screwed-end globe-style con... more ANSI/ISA-75.08.04-2001 (R2013)
- Face-to-Face Dimensions for Buttweld-End Globe-Style Control
Valves (Class 4500) $32.00 $36.00 $40.00 This standard applies to
buttweld-end globe-style control valves, sizes 1/2 inch (15 mm)
through 8 inches (200 mm), having top and cage guiding... more
ANSI/ISA-75.08.05-2002 (R2007) - Face-to-Face Dimensions for
Buttweld-End Globe-Style Control Valves (Class 150, 300, 600, 900,
1500, and 2500) $32.00 $36.00 $40.00 This standard applies to
buttweld-end globe-style control valves, sizes 15 mm (1/2 inch)
through 450 mm (18 inches) for Classes 150 through 2500, havi...
more ANSI/ISA-75.08.06-2002 (R2013) - Face-to-Face Dimensions for
Flanged Globe-Style Control Valve Bodies (Classes 900, 1500, and
2500) $32.00 $36.00 $40.00 This standard applies to flanged
globe-style control valves, sizes 15 mm (1/2 inch) through 450 mm
(18 inches), having top, top and bottom, port, or c... more
ANSI/ISA-75.08.07-2001 (R2013) - Face-to-Face Dimensions for
Separable Flanged Globe-Style Control Valves (Classes 150, 300, and
600) $32.00 $36.00 $40.00 This standard applies to flanged
globe-style control valves, sizes 15 mm (1/2 inch) through 450 mm
(18 inches), having top, top and bottom, port, or c... more
ANSI/ISA-75.08.08-1999 (R2007) - Face-to-Centerline Dimensions for
Flanged Globe-Style Angle Control Valve Bodies (Classes 150, 300,
and 600) $32.00 $36.00 $40.00 This standard applies to raised-face
flanged globe-style angle control valves, 1 inch through 8
inches... more ANSI/ISA-75.08.09-2005 (R2010 - ), Face-to-Face
Dimensions for Sliding Stem Flangeless Control Valves (Classes 150,
300, and 600) $32.00 $36.00 $40.00 This standard applies to sliding
stem flangeless control valves, sizes 20 mm (3/4 inch) through 600
mm (24 inches) for Classes 150, 300, and 600... more
ANSI/ISA-75.10.01-2013 - General Requirements for Clamp or Pinch
Valves $32.00 $36.00 $40.00 This document applies to valves, sizes
1 inch through 26 inches, of the clamp or pinch valve design,
incorporating clamp or pinch elements... more
ANSI/ISA-75.10.02-2014 - Installed Face-to-Face Dimensions for Dual
Pinch Flanged Clamp or Pinch Valves (Classes 125 and 150) $32.00
$36.00 $40.00 This document applies to valves, sizes NPS 1/2 (DN
15) through NPS 26 (DN 650), of the clamp or pinch valve design
incorporating clamp or pinch elemen... more ANSI/ISA-75.10.03-2015,
Installed Face-to-Face Dimensions for Shell and Tube Flanged Pinch
Valves (Classes 125 and 150) $32.00 $36.00 $40.00 This document
applies to directly pneumatically operated pinch valves, sizes inch
through 24 inches, of the shell and tube design which have flanges
that mate with ASME B16.1 Class 125 (PN20) and/or ... more
ANSI/ISA-75.11.01-2013 - Inherent Flow Characteristic and
Rangeability of Control Valves $32.00 $36.00 $40.00 The scope of
this standard is to define the statement of typical control valve
inherent flow characteristics and inherent rangeabilities, and to
estab... more ANSI/ISA-75.13.01-2013 - Method of Evaluating the
Performance of Positioners with Analog Input Signals and Pneumatic
Output $48.00 $54.00 $60.00 This standard specifies tests designed
to determine the performance of positioners with analog input
signals and pneumatic output. The method of evalu... more
ISA-75.17-1989 - Control Valve Aerodynamic Noise Prediction $32.00
$36.00 $40.00 Scope: This standard establishes a method to predict
the noise generated in a control valve of standard design by the
flow of compressible flu... more ANSI/ISA-75.19.01-2013 -
Hydrostatic Testing of Control Valves $48.00 $54.00 $60.00 This
standard applies to control valves having bodies, bonnets, cover
plates, and bottom flanges made of carbon steel, low alloy and high
alloy (stain... more ISA-RP75.23-1995 - Considerations for
Evaluating Control Valve Cavitation $72.00 $81.00 $90.00 Scope:
This recommended practice is intended for control valves used in
the control of process fluids and is not intended to apply to fluid
po... more ANSI/ISA-75.25.01-2000 (R2010) - Test Procedure for
Control from Step Inputs $48.00 $54.00 $60.00 This standard defines
the testing and reporting of step response of control valves that
are used in throttling closed loop control applications. A con...
more ANSI/ISA-TR75.25.02-2000 (R2010) - Control Valve Response
Measurement from Step Inputs $48.00 $54.00 $60.00 This technical
report describes the characteristic response of a control valve to
step input signal changes. It considers the factors that affect
this... more ANSI/ISA-75.26.01-2006 - Control Valve Diagnostic Data
Acquisition and Reporting $60.00 $67.50 $75.00 This document
applies to all pneumatically operated, automated rotary or
reciprocating, on/off, or modulating valves. It also includes
automation comp... more ISA-RP76.0.01-1998 - Analyzer System
Inspection and Acceptance $40.00 $45.00 $50.00 Scope: The attached
inspection guidelines are recommended for use during structured
analyzer system inspection. The inspection should be perfo... more
ISA-76.00.02-2002 - Modular Component Interfaces for Surface-Mount
Fluid Distribution Components - Part 1: Elastomeric Seals $32.00
$36.00 $40.00 Establishes properties and physical dimensions that
define the interface for surface-mount fluid distribution
components with elastomeric sealing devi... more
ANSI/ISA-77.13.01-1999 (R2008) - Fossil Fuel Power Plant Steam
Turbine Bypass System $48.00 $54.00 $60.00 This standard covers the
design requirements and operator interface for steam turbine bypass
systems for drum and once-through steam generators and co... more
ANSI/ISA-77.14.01-2010 - Fossil Fuel Power Plant Steam Turbine
Controls $40.00 $45.00 $50.00 This standard addresses steam turbine
governor controls and overspeed protection of steam turbine
generators in fossil power plants. Specifically excl... more
ANSI/ISA-77.20.01-2012 - Fossil Fuel Power Plant Simulators -
Functional Requirements $54.00 $57.00 $60.00 The purpose of this
standard is to establish the functional requirements for several
types of plant-specific, fossil fuel power plant control room
sim... more ANSI/ISA-TR77.30.01-2015, Power Plant Control System
Dynamic Performance Test Methods and Procedures $60.00 $67.50
$75.00 This technical report defines test procedures, data
collection requirements and data analysis methods for determining
and reporting the dynamic performance of control systems for boiler
and turbine control systems... more ISA-TR5.1.01 -
ISA-TR77.40.01-2012 - Functional Diagram Usage $48.00 $54.00 $60.00
This technical report is to expand on and illustrate usage of
function block symbols and functions and to prepare examples in
development of complex f... more ANSI/ISA-77.41.01-2010 - Fossil
Fuel Power Plant Boiler Combustion Controls $40.00 $45.00 $50.00
The scope of this standard is to address the major combustion
control subsystems in boilers with steaming capabilities of 200,000
lb/hr (25 kg/s) or g... more ANSI/ISA-77.42.01-1999 (R2011) -
Fossil Fuel Power Plant Feedwater Control System - Drum Type $40.00
$45.00 $50.00 This standard is intended to assist in the
development of design specificaitons covering the measurement and
control of feedwater systems in boilers w... more
ISA-TR77.42.02-2014 - Fossil Fuel Power Plant Compensated
Differential Pressure Based Drum Level Measurement $40.00 $45.00
$50.00 The purpose of this technical report is to provide
recommendations for differential pressure based level measurement
in boiler steam drums... more ANSI/ISA-77.43.01-2014, Fossil Fuel
Power Plant Unit/Plant Demand Development $48.00 $54.00 $60.00 The
purpose of this document is to establish the minimum requirements
for the functional design specifications of unit/plant demand
development for co... more ANSI/ISA-77.44.01-2007 (R2013) - Fossil
Fuel Power Plant - Steam Temperature Controls $48.00 $54.00 $60.00
The scope of this standard addresses the major steam temperature
control subsystems in boilers with steaming capacities of 200,000
lb/hr (25 kg/s) or... more ISA-RP77.60.02-2014 - Fossil Fuel Power
Plant Human-Machine Interface: Hard Panel Alarms $40.00 $45.00
$50.00 Provides advice and guidance in the development and design
of plant alarm systems. The primary application for this
recommended practice is fossil pow... more ISA-TR77.60.04-2013 -
Fossil Fuel Power Plant Human-Machine Interface - Electronic Screen
Displays $48.00 $54.00 $60.00 This technical report addresses the
following issues relating to Electronic Screen Displays for
operators of fossil-fired power plants with boilers of... more
ISA-RP77.60.05-2001 (R2012) - ISA-RP77.60.05-2001 (R2012), Fossil
Fuel Power Plant Human-Machine Interface: Task Analysis $40.00
$45.00 $50.00 Approaches are provided in this recommended practice
for the applicaiton of task analysis during the conceptual design,
preliminary design, and detail... more ANSI/ISA-TR77.70.01-2010 -
Tracking and Reporting of Instrument and Control Data $48.00 $54.00
$60.00 This technical report provides guidance in the design and
function of a method for instrument tracking and documentation
control that is adaptable for... more ANSI/ISA-77.70.02-2014,
Fossil Fuel Power Plant Instrument Piping Installation $40.00
$45.00 $50.00 This standard covers the mechanical design,
engineering, fabrication, installation, testing, and protection of
fossil power plant instrumentation sens... more
ANSI/ISA-77.82.01-2011 - Selective Catalytic Reduction (SCR)
Control Systems $40.00 $45.00 $50.00 This standard addresses the
control functions associated with the selective catalytic reduction
systems on fossil-fired steam boilers greater than 20... more
ISA-82.03-1988 - Safety Standard for Electrical and Electronic
Test, Measuring, Controlling, and Related Equipment $32.00 $36.00
$40.00 Scope: This standard applies to electrical, electronic
(analog/digital) and electromechanical process measurement and
control equipment whi... more ISA-84.00.01-2004 Part 1 (IEC 61511-1
Mod) - Functional Safety: Safety Instrumented Systems for the
Process Industry Sector - Part 1: Framework, Definitions, System,
Hardware and Software Requirements $359.00 $389.00 $419.00 (Please
note that this ISA standard is an IEC adoption with modifications.
Therefore, the "Free Preview for Members" option i... more
ISA-84.00.01-2004 Part 2 (IEC 61511-2 Mod) - Functional Safety:
Safety Instrumented Systems for the Process Industry Sector - Part
2: Guidelines for the Application of ANSI/ISA-84.00.01-2004 Part 1
(IEC 61511-1 Mod) - Informative $359.00 $389.00 $419.00 (Please
note that this ISA standard is an IEC adoption with modifications.
Therefore, the "Free Preview for Members" option i... more
ISA-84.00.01-2004 Part 3 (IEC 61511-3 Mod) - Functional Safety:
Safety Instrumented Systems for the Process Industry Sector - Part
3: Guidance for the Determiniation of the Required Safety Integrity
Levels - Informative $292.00 $317.00 $342.00 (Please note that this
ISA standard is an IEC adoption with modifications. Therefore, the
"Free Preview for Members" option i... more ISA-TR84.00.02-2002 -
Parts 1-5, Safety Instrumented Functions (SIF) Safety Integrity
Level (SIL) Evaluation Techniques Package $336.00 $378.00 $420.00
Provides the full set of five technical reports covering the
performance based approach for evaluating the reliability of SIF
and presenting system re... more ISA-TR84.00.02-2002, Part 1 -
Safety Instrumented Functions (SIF) - Safety Integrity Level (SIL)
Evaluation Techniques Part 1: Introduction $104.00 $117.00 $130.00
Introduces the reader to the performance based approach for
evaluating the reliability of SIF and presents system reliability
methodologies that can b... more ISA-TR84.00.02-2002, Part 2 -
Safety Instrumented Functions (SIF) - Safety Integrity Level (SIL)
Evaluation Techniques Part 2: Determining the SIL of a SIF via
Simplified Equations $72.00 $81.00 $90.00 Provides one possible
technique for calculating PFDavg values for Safety Instrumented
Functions (SIF) installed in accordance with ANSI/ISA-84.01-1996...
more SA-TR84.00.02-2002, Part 3 - Safety Instrumented Functions
(SIF) - Safety Integrity Level (SIL) Evaluation Techniques Part 3:
Determining the SIL of a SIF via Fault Tree Analysis $104.00
$117.00 $130.00 Provides guidance on the application of Fault Tree
Analysis (FTA) to SIF. FTA is one possible technique for
calculating SIL for a SIF installed per A... more
ISA-TR84.00.02-2002, Part 4 - Safety Instrumented Functions (SIF) -
Safety Integrity Level (SIL) Evaluation Techniques Part 4:
Determining the SIL of a SIF via Markov Analysis $88.00 $99.00
$110.00 Provides one possible technique for calculating PFDavg
values for Safety Instrumented Systems (SIS) installed in
accordance with ANSI/ISA-84.01-1996... more ISA-TR84.00.02-2002,
Part 5 - Safety Instrumented Functions (SIF) - Safety Integrity
Level (SIL) Evaluation Techniques Part 5: Determining the PFD of
SIS Logic Solvers via Markov Analysis $104.00 $117.00 $130.00 The
procedures and examples outlined in ISA-TR84.00.02, Part 5, provide
the engineer with Markov modeling steps to be followed in
determining a mathem... more ISA-TR84.00.03-2012 - Mechanical
Integrity of Safety Instrumented Systems (SIS) $140.00 $160.00
$180.00 Lifecycle phases 5 and 6 involve the installation and
testing of the SIS, the validation that the SIS meets the safety
requirements specification, and... more ISA-TR84.00.04-2015, Part 1
- Guideline for the Implementation of ANSI/ISA-84.00.01-2004 (IEC
61511) $186.00 $208.00 $230.00 ANSI/ISA-84.01-1996 has been retired
and replaced with ANSI/ISA-84.00.01-2004 Parts 1-3 (IEC 61511 Mod).
The new standard is the ANSI/ISA adoption of... more
ISA-TR84.00.04-2005 Part 2 - Part 2: Example Implementation of
ANSI/ISA-84.00.01-2004 (IEC 61511 Mod) $72.00 $81.00 $90.00 This
technical report is intended to be used in conjunction with
ISA-TR84.00.04-2005 Part 1 to provide an example that illustrates
how to apply ANSI/I... more ISA-TR84.00.05-2009 - Guidance on the
Identification of Safety Instrumented Functions (SIF) in Burner
Management Systems (BMS) $88.00 $99.00 $110.00 ISA-TR84.00.05 is
intended to: identify and classify SIFs within typical FMSs for
typical operating modes of fired equipment (e.g., pre-f... more
ISA-TR84.00.06-2009 - Safety Fieldbus Design Considerations for
Process Industry Sector Applications $72.00 $81.00 $90.00 This
technical report: provides guidance on implementing Safety Fieldbus
protocols and devices in safety instrumented systems in the proc...
more ISA-TR84.00.07-2010 - Guidance on the Evaluation of Fire and
Gas System Effectiveness $88.00 $99.00 $110.00 This technical
report is informative and does not contain any mandatory
requirements. This technical report is intended to be used in...
more ISA-TR84.00.09-2013 - Security Countermeasures Related to
Safety Instrumented Systems (SIS) $104.00 $117.00 $130.00 This
document addresses and provides guidance on the countermeasures
used to reduce the likelihood of a security breach of the SIS that
degrades its a... more ANSI/ISA-84.91.01-2012 - Identification and
Mechanical Integrity of Safety Controls, Alarms, and Interlocks in
the Process Industry $48.00 $54.00 $60.00 This standard addresses
the instruments that are classified as process safety safeguards by
the authority having jurisdiction (typically the owner/ope... more
ANSI/ISA-88.00.01-2010 - Batch Control Part 1: Models and
Terminology $144.00 $162.00 $180.00 This Part 1 standard on Batch
Control defines reference models for batch and related
procedure-oriented manufacturing as used in the process
industrie... more ISA-88.00.02-2001 - Batch Control Part 2: Data
Structures and Guidelines for Languages $144.00 $162.00 $180.00
Scope: This Part 2 standard on Batch Control defines data models
that describe batch control as applied in the process industries,
data struct... more ISA-TR88.00.02-2008 - Machine and Unit States:
An Implementation Example of ISA-88 $88.00 $99.00 $110.00 The ISA88
committee has defined a batch standard series that provides
terminology and a consistent set of concepts and models for batch
manufacturing... more ISA-88.00.03-2003 - Batch Control Part 3:
General and Site Recipe Models and Representation $104.00 $117.00
$130.00 This Part 3 standard on Batch Control defines a model for
general and site recipes; the activities that describe the use of
general and site recipes w... more ISA-TR88.0.03-1996 - Possible
Recipe Procedure Presentation Formats $40.00 $45.00 $50.00 Defines
format or graphical representation for recipes used in the
automation of batch processing plants as defined in
ANSI/ISA-88.01-1995. Scop... more ANSI/ISA-88.00.04-2006 - Batch
Control Part 4: Batch Production Records $104.00 $117.00 $130.00
This Part 4 standard defines a reference model for batch production
records containing information about production of batches or
elements of batch pr... more ISA-TR88.95.01-2008 - Using ISA-88 and
ISA-95 Together $88.00 $99.00 $110.00 When the ISA-88 and ISA-95
standards are applied together in an application or project, some
of the terminologies, models and key definitions in thes... more
ISA-TR91.00.02-2003 - Criticality Classification Guideline for
Instrumentation $48.00 $54.00 $60.00 This guideline is developed to
assist engineering, operations, and maintenance personnel with
establishing the classification of their instrumentation... more
ANSI/ISA-92.00.01-2010 - Performance Requirements for Toxic Gas
Detectors $60.00 $67.50 $75.00 This standard provides minimum
requirements for the construction, performance, and testing of
portable, transportable, mobile, and stationary electric... more
ANSI/ISA-92.00.02-2013 - Installation, Operation, and Maintenance
of Toxic Gas-Detection Instruments $70.00 $85.00 $100.00 This
standard gives guidance on, and recommended practice for, the
selection, installation, use and maintenance of electrically
operated equipment int... more ANSI/ISA-92.00.04-2014 - Performance
Requirements for Open Path Toxic Gas Detectors $60.00 $65.00 $75.00
This standard provides minimum requirements for fixed and
transportable open path toxic gas detection equipment. more
ANSI/ISA-92.04.01, Part I-2007 (R2013) - Performance Requirements
for Instruments Used To Detect Oxygen-Deficient/Oxygen-Enriched
Atmospheres $48.00 $54.00 $60.00 This standard addresses the
details of construction, performance, and testing of portable,
mobile, and stationary electrical instruments used to provi... more
ISA-RP92.04.02, Part II-1996 (R2013) - Installation, Operation, and
Maintenance of Instruments Used to Detect
Oxygen-Deficient/Oxygen-Enriched Atmospheres $48.00 $54.00 $60.00
ISA-RP92.04.02 establishes user criteria for the installation,
operation, and maintenance of instruments used to detect
oxygen-deficient/oxygen-enrich... more ANSI/ISA-TR92.00.03-2014 -
Guide for Toxic Gas Detection as a Method of Personnel Protection
$48.00 $54.00 $60.00 Toxic gas detection in process safety
management provides personnel protection by minimizing the
probability of toxic gases reaching hazardous levels... more
ANSI/ISA-TR92.06.03-2008 (R2013) - Feasibility of Chlorine
Detection Instrument Testing $40.00 $45.00 $50.00 This report has
been written to provide support to the work of the ISA92.06
Subcommittee responsible for drafting a performance standard for
chlorine... more ANSI/ISA-95.00.01-2010 (IEC 62264-1 Mod) -
Enterprise-Control System Integration - Part 1: Models and
Terminology $394.00 $431.00 $468.00 This standard describes the
interface content between manufacturing operations and control
functions and other enterprise functions. The interfaces co... more
ANSI/ISA-95.00.02-2010 (IEC 62264-2 Mod) - Enterprise-Control
System Integration - Part 2: Object Model Attributes $380.00
$417.00 $454.00 This part of ISA95, in conjunction with
ANSI/ISA-95.00.01-2010 (IEC 62264-1 Mod), Enterprise-Control System
Integration Part 1: Models and Terminolo... more
ANSI/ISA-95.00.03-2013 (IEC 62264-3 Modified) - Enterprise-Control
System Integration - Part 3: Activity Models of Manufacturing
Operations Management $380.00 $417.00 $454.00 This Part 3 standard
in the ISA-95 series defines activity models of manufacturing
operations management that enable enterprise system to control
syst... more ANSI/ISA-95.00.04-2012 - Enterprise-Control System
Integration - Part 4: Objects and attributes for manufacturing
operations management integration $104.00 $117.00 $130.00 This
ISA-95 Part 4 standard, in conjunction with ANSI/ISA-95.00.03-2005,
Enterprise-Control System IntegrationPart 3: Activity Models of
Manufacturin... more ANSI/ISA-95.00.05-2013 - Enterprise-Control
System Integration - Part 5: Business-to-Manufacturing Transactions
$154.00 $167.00 $180.00 This ISA-95 Part 5 standard defines
transactions in terms of information exchanges between applications
performing business and manufacturing activities between Levels 3
and 4, and within Level 3... more ANSI/ISA-95.00.06-2014,
Enterprise-Control System Integration - Part 6: Messaging Service
Model $104.00 $117.00 $130.00 This part of ISA-95 defines a model
of a set of messaging services for information exchanges across
Levels 3 and 4, and within Level 3, between applications performing
business and manufacturing activities... more
ANSI/ISA-96.02.01-2007 - Guidelines for the Specification of
Electric Valve Actuators $40.00 $45.00 $50.00 This standard
provides general requirements for the development of specifications
for electric actuators... more ANSI/ISA-96.03.01-2012 - Guidelines
for the Specification of Heavy Duty Pneumatically Powered Quarter
Turn Valve Actuators $40.00 $45.00 $50.00 This standard provides
general requirements for the development of specifications for
pneumatic scotch yoke actuators. This document applies to act...
more ANSI/ISA-96.03.02-2015, Guidelines for the Specification of
Pneumatic Rack and Pinion Valve Actuators $40.00 $45.00 $50.00 This
standard provides general requirements for the development of
specifications for pneumatic rack and pinion actuators. This
document applies to... more ANSI/ISA-96.03.03-2013 - Guidelines for
the Specification of Pneumatic Vane Type Valve Actuators $40.00
$45.00 $50.00 This standard provides general requirements for the
development of specifications for pneumatic vane type actuators.
This document applies to actua... more ANSI/ISA-TR96.05.01-2008 -
Partial Stroke Testing of Automated Block Valves $40.00 $45.00
$50.00 ANSI/ISA-TR96.05.01 is limited to automated valves normally
operating in either a full open or full closed position and
provides guidance on the follo... more ANSI/ISA-96.06.01-2014,
Guidelines for the Specification of Self Contained
Electro-Hydraulic Valve Actuators $48.00 $54.00 $60.00
ANSI/ISA-96.06.01-2014 provides requirements for the specification
of self contained electro-hydraulic linear and rotary valve
actuators...more ANSI/ISA-TR99.00.01-2007 - Security Technologies
for Industrial Automation and Control Systems $104.00 $117.00
$130.00 This ISA technical report provides a current assessment of
various cyber security tools, mitigation counter-measures, and
technologies that may effectively apply to the...... more
ISA-TR100.00.01-2006 - The Automation Engineer's Guide to Wireless
Technology Part 1 : The Physics of Radio, a Tutorial $104.00
$117.00 $130.00 This technical report presents a general tutorial
on the basic principles of radio communications, and then discusses
the performance of spread spectr... more ISA-TR100.00.02-2009 - The
Automation Engineer's Guide to Wireless Technology: Part 2 - A
Review of Technologies for Industrial Asset Tracking $72.00 $81.00
$90.00 This technical report presents a number of technologies
that, as of the date of this document, are under consideration for
deployment and utilization... more ISA-TR100.00.03-2011 - Wireless
User Requirements for Factory Automation $72.00 $81.00 $90.00 This
technical report presents descriptive user and market-related
requirements of wireless communication in factory automation
applications. It provi... more ANSI/ISA-100.11a-2011 - Wireless
systems for industrial automation: Process control and related
applications $176.00 $198.00 $220.00 This ISA standard is intended
to provide reliable and secure wireless operation for non-critical
monitoring, alerting, supervisory control, open loop... more
ISA-TR100.14.01-Part I-2011 - Trustworthiness in Wireless
Industrial Automation: Part 1, Information for End Users and
Regulators $72.00 $81.00 $90.00 This document contains introductory
material and information intended to demonstrate to the reader that
wireless is a viable solution today. The read... more
ANSI/ISA-TR100.15.01-2012 - Backhaul Architecture Model: Secured
Connectivity over Untrusted or Trusted Networks $104.00 $117.00
$130.00 This document presents an architectural model for
interconnecting automation system elements over untrusted backhaul
networks. The focus is on wireless... more ANSI/ISA-101.01-2015 -
Human Machine Interfaces for Process Automation Systems $144.00
$162.00 $180.00 This standard addresses Human Machine Interfaces
(HMI) for equipment and automated processes. If the standard,
recommended practices and methodology are followed, the result
should enable the users to be more effective yielding improved
safety, quality, productivity...more ANSI/ISA-TR104.00.03-2010 -
Meeting the requirements for integrating fieldbus devices in
engineering tools for field devices $48.00 $54.00 $60.00 This
technical report provides an evaluation and assessment of EDDL
technology. It provides guidance to device and system manufacturers
for how EDDL t... more ISA-TR106.00.01-2013 - Procedure Automation
for Continuous Process Operations - Models and Terminology $120.00
$135.00 $150.00 This technical report provides an overview of the
benefits, best practices, and language, including terms and
definitions, for applying procedure auto... more
ANSI/ISA-107.1-2013 - Industry Standard File Format for
Revolution-Based, Tip Timing Data $40.00 $45.00 $50.00 This
standard presents the file format to be utilized for data acquired
by a revolution-based tip timing data system. It provides the
following:... more ISA-TR108.1-2015, Intelligent Device Management
Part 1: Concepts and Terminology $120.00 $135.00 $150.00
ISA-TR108.1 describes concepts and terminology necessary to
understand and communicate effectively about intelligent device
management... more ANSI/ISA-60079-0 (12.00.01)-2013 - Explosive
Atmospheres - Part 0: Equipment - General Requirements $372.00
$409.00 $446.00 (Please note that this ISA standard is an IEC
adoption with modifications. Therefore, the "Free Preview for
Members" option i... more ANSI/ISA-60079-1 (12.22.01)-2009 (R2013)
- Explosive Atmospheres - Part 1: Equipment Protection by
Flameproof Enclosures "d" $337.00 $367.00 $397.00 (Please note that
this ISA standard is an IEC adoption with modifications. Therefore,
the "Free Preview for Members" option i... more ANSI/ISA-60079-10-1
(12.24.01)-2014 - Explosive atmospheres - Part 10-1: Classification
of areas Explosive gas atmospheres $339.00 $369.00 $399.00 more
ANSI/ISA-60079-10-2 (12.10.05)-2013 - Explosive Atmospheres - Part
10-2: Classification of areas - Combustible dust atmospheres
$230.00 $225.00 $280.00 (Please note that this ISA standard is an
IEC adoption with modifications. Therefore, the "Free Preview for
Members" option i... more ANSI/ISA-60079-11 (12.02.01)-2014 -
Explosive Atmospheres - Part 11: Equipment protection by intrinsic
safety "i" (Edition 6.1) $400.00 $475.00 $550.00 (Please note that
this ISA standard is an IEC adoption with modifications. Therefore,
the "Free Preview for Members" option i... more ANSI/ISA-60079-15
(12.12.02)-2012 - Explosive Atmospheres - Part 15: Equipment
protection by type of protection "n" (Edition 4) $340.00 $380.00
$420.00 (Please note that this ISA standard is an IEC adoption with
modifications. Therefore, the "Free Preview for Members" option
i... more ANSI/ISA-60079-18 (12.23.01)-2012 - Explosive atmospheres
- Part 18: Equipment protection by encapsulation "m" $230.00
$248.00 $266.00 (Please note that this ISA standard is an IEC
adoption with modifications. Therefore, the "Free Preview for
Members" option i... more ANSI/ISA-60079-2 (12.04.01)-2010 -
Explosive atmospheres - Part 2: Equipment protection by pressurized
enclosures "p" $292.00 $317.00 $342.00 (Please note that this ISA
standard is an IEC adoption with modifications. Therefore, the
"Free Preview for Members" option i... more ANSI/ISA-60079-25
(12.02.05)-2011 - Explosive Atmospheres - Part 25: Intrinsically
safe electrical systems $359.00 $389.00 $419.00 (Please note that
this ISA standard is an IEC adoption with modifications. Therefore,
the "Free Preview for Members" option i... more ANSI/ISA-60079-26
(12.00.03)-2011 - Explosive atmospheres - Part 26: Equipment for
Use in Class I, Zone 0 Hazardous (Classified) Locations $154.00
$164.00 $177.00 (Please note that this ISA standard is an IEC
adoption with modifications. Therefore, the "Free Preview for
Members" option i... more ANSI/ISA-60079-28 (12.21.02)-2013 -
Explosive Atmospheres - Part 28: Protection of equipment and
transmission systems using optical radiation, Edition 1.1 $254.00
$279.00 $304.00 (Please note that this ISA standard is an IEC
adoption with modifications. Therefore, the "Free Preview for
Members" option i... more ANSI/ISA-60079-29-1 (12.13.01)-2013 -
Explosive Atmospheres - Part 29-1: Gas detectors - Performance
requirements of detectors for flammable gases $278.00 $313.00
$348.00 (Please note that this ISA standard is an IEC adoption with
modifications. Therefore, the "Free Preview for Members" option
i... more ANSI/ISA-60079-29-2 (12.13.02)-2012 - Explosive
Atmospheres - Part 29-2: Gas detectors - Selection, installation,
use and maintenance of detectors for flammable gases and oxygen
$372.00 $402.00 $432.00 (Please note that this ISA standard is an
IEC adoption with modifications. Therefore, the "Free Preview for
Members" option i... more ANSI/ISA-60079-31 (12.10.03)-2013 -
Explosive Atmospheres - Part 31: Equipment Dust Ignition Protection
by Enclosure "t" (Edition 1.1) $60.00 $67.50 $75.00 (Please note
that this ISA standard is an IEC adoption with modifications.
Therefore, the "Free Preview for Members" option i... more
ANSI/ISA-60079-5 (12.00.04)-2009 (R2013) - Explosive Atmospheres -
Part 5: Equipment Protection by Powder Filling "q" $154.00 $167.00
$180.00 (Please note that this ISA standard is an IEC adoption with
modifications. Therefore, the "Free Preview for Members" option
i... more ANSI/ISA-60079-6 (12.00.05)-2009 (R2013) - Explosive
Atmospheres - Part 6: Equipment Protection by Oil-Immersion "o"
$88.00 $99.00 $110.00 (Please note that this ISA standard is an IEC
adoption with modifications. Therefore, the "Free Preview for
Members" option i... more ANSI/ISA-60079-7 (12.16.01)-2008 (R2013)
- Explosive Atmospheres - Part 7: Equipment protection by increased
safety "e" $359.00 $389.00 $419.00 (Please note that this ISA
standard is an IEC adoption with modifications. Therefore, the
"Free Preview for Members" option i... more ANSI/ISA-60079-27
(12.02.04)-2006 - Fieldbus intrinsically safe concept (FISCO) and
Fieldbus non-incendive concept (FNICO) $60.00 $67.50 $75.00 (Please
note that this ISA standard is an IEC adoption with modifications.
Therefore, the "Free Preview for Members" option i... more
ANSI/ISA-61010-031 (82.02.02)-2007 - Safety Requirements for
Electrical Equipment for Measurement, Control, and Laboratory Use -
Part 031: Safety requirements for hand-held probe assemblies for
electrical measurement and test $440.00 $378.00 $524.00 (Please
note that this ISA standard is an IEC adoption with modifications.
Therefore, the "Free Preview for Members" option i... more
ANSI/ISA-61010-1 (82.02.01)-2012 - Safety Requirements for
Electrical Equipment for Measurement, Control, and Laboratory Use -
Part 1: General Requirements $401.00 $438.00 $475.00 (Please note
that this ISA standard is an IEC adoption with modifications.
Therefore, the "Free Preview for Members" option i... more
ANSI/ISA-61010-2-030 (82.02.03)-2012 - Safety Requirements for
Electrical Equipment for Measurement, Control, and Laboratory Use -
Part 2-030: Particular Requirements for Testing and Measuring
Circuits $205.00 $227.00 $249.00 (Please note that this ISA
standard is an IEC adoption with modifications. Therefore, the
"Free Preview for Members" option i... more ANSI/ISA-61241-11
(12.10.04)-2006 (R2011) - Electrical Apparatus for Use in Zone 20,
Zone 21 and Zone 22 Hazardous (Classified) Locations - Protection
by Intrinsic Safety "iD" $88.00 $99.00 $110.00 (Please note that
this ISA standard is an IEC adoption with modifications. Therefore,
the "Free Preview for Members" option i... more ANSI/ISA-61241-18
(12.10.07)-2006 (R2011) - Electrical Apparatus for Use in Zone 20,
Zone 21 and Zone 22 Hazardous (Classified) Locations - Protection
by Intrinsic Safety "mD" $120.00 $135.00 $150.00 (Please note that
this ISA standard is an IEC adoption with modifications. Therefore,
the "Free Preview for Members" option i... more ANSI/ISA-61241-0
(12.10.02)-2006 (R2011) - Electrical Apparatus for Use in Zone 20,
Zone 21, and Zone 22 Hazardous (Classified) Locations - General
Requirements $176.00 $198.00 $220.00 (Please note that this ISA
standard is an IEC adoption with modifications. Therefore, the
"Free Preview for Members" option i... more ANSI/ISA-61241-1
(12.10.03)-2006 (R2011) - Electrical Apparatus for Use in Zone 21
and Zone 22 Hazardous (Classified) Locations - Protection by
Enclosures "tD" $88.00 $99.00 $110.00 (Please note that this ISA
standard is an IEC adoption with modifications. Therefore, the
"Free Preview for Members" option i... more ANSI/ISA-61241-2
(12.10.06)-2006 (R2011) - Electrical Apparatus for Use in Zone 21
and Zone 22 Hazardous (Classified) Locations - Protection by
Pressurization "pD" $104.00 $117.00 $130.00 (Please note that this
ISA standard is an IEC adoption with modifications. Therefore, the
"Free Preview for Members" option i... more ANSI/ISA-61804-3
(104.00.01)-2007 - Function Blocks (FB) for Process Control - Part
3: Electronic Device Description Language (EDDL) $451.00 $493.00
$535.00 (Please note that this ISA standard is an IEC adoption with
modifications. Therefore, the "Free Preview for Members" option
i... more ANSI/ISA-TR61804-4 (104.00.02)-2007 - Function Blocks
(FB) for Process Control - Part 4: EDD Interoperability Guideline
$200.00 $225.00 $250.00 (Please note that this ISA document is an
IEC adoption with modifications. Therefore, the "Free Preview for
Members" option i... more ANSI/ISA-62381-2011 (IEC 62381 Modified)
- Automation Systems in the Process Industry - Factory Acceptance
Test (FAT), Site Acceptance Test (SAT), and Site Integration Test
(SIT $254.00 $273.00 $292.00 (Please note that this ISA standard is
an IEC adoption with modifications. Therefore, the "Free Preview
for Members" option i... more ANSI/ISA-62382-2012 (IEC 62382
Modified) - Automation Systems in the Process Industry - Electrical
and Instrumentation Loop Check $154.00 $169.00 $184.00 (Please note
that this ISA standard is an IEC adoption with modifications.
Therefore, the "Free Preview for Members" option i... more
ANSI/ISA-62443-1-1 (99.01.01)-2007 - Security for Industrial
Automation and Control Systems Part 1: Terminology, Concepts, and
Models $125.00 $140.00 $155.00 Formerly designated
ANSI/ISA-99.00.01-2007, this is the first in a series of ISA
standards that addresses the subject of security for industrial
autom... more ANSI/ISA-62443-2-1 (99.02.01)-2009 - Security for
Industrial Automation and Control Systems: Establishing an
Industrial Automation and Control Systems Security Program $172.00
$194.00 $215.00 Formerly designated ANSI/ISA-99.02.01-2009, this
standard is part of a multipart series that addresses the issue of
security for industrial automation... more ISA-TR62443-2-3-2015,
Security for industrial automation and control systems Part 2-3:
Patch management in the IACS environment $205.00 $232.50 $260.00
ISA-TR62443-2-3 describes requirements for asset owners and
industrial automation and control system (IACS) product suppliers
that have established and are now maintaining an IACS patch
management program. This technical report recommends a defined
format for...more ANSI/ISA-62443-3-3 (99.03.03)-2013 - Security for
industrial automation and control systems Part 3-3: System security
requirements and security levels $205.00 $232.50 $260.00 This part
of the ISA-62443 series provides detailed technical control system
requirements (SRs) associated with the seven foundational
requirements (F... more ANSI/ISA-62453-306 (103.00.07)-2011 - Field
device tool (FDT) interface specification - Part 306: Communication
profile integration - IEC 61784 CPF 6 $206.00 $226.00 $246.00
(Please note that this ISA standard is an IEC adoption with
modifications. Therefore, the "Free Preview for Members" option
i... more ANSI/ISA-62453-309 (103.00.08)-2011 - Field device tool
(FDT) interface specification - Part 309: Communication profile
integration - IEC 61784 CPF 9 $206.00 $226.00 $246.00 (Please note
that this ISA standard is an IEC adoption with modifications.
Therefore, the "Free Preview for Members" option i... more
ANSI/ISA-62453-315 (103.00.09)-2011 - Field device tool (FDT)
interface specification - Part 315: Communication profile
integration - IEC 61784 CPF 15 $303.00 $333.00 $363.00 (Please note
that this ISA standard is an IEC adoption with modifications.
Therefore, the "Free Preview for Members" option i... more
ANSI/ISA-62453-1 (103.00.01)-2011 - Field device tool (FDT)
interface specification - Part 1: Overview and guidance $254.00
$274.00 $294.00 (Please note that this ISA standard is an IEC
adoption with modifications. Therefore, the "Free Preview for
Members" option i... more ANSI/ISA-62453-2 (103.00.02)-2011 - Field
device tool (FDT) interface specification - Part 2: Concepts and
detailed description $399.00 $429.00 $459.00 (Please note that this
ISA standard is an IEC adoption with modifications. Therefore, the
"Free Preview for Members" option i... more ANSI/ISA-62453-301
(103.00.03)-2011 - Field device tool (FDT) interface specification
- Part 301: Communication profile integration - IEC 61784 CPF 1
$387.00 $417.00 $447.00 (Please note that this ISA standard is an
IEC adoption with modifications. Therefore, the "Free Preview for
Members" option i... more ANSI/ISA-62453-302 (103.00.04)-2011 -
Field device tool (FDT) interface specification - Part 302:
Communication profile integration - IEC 61784 CPF 2 $230.00 $250.00
$270.00 (Please note that this ISA standard is an IEC adoption with
modifications. Therefore, the "Free Preview for Members" option
i... more ANSI/ISA-62453-303-1 (103.00.05)-2011 - Field device tool
(FDT) interface specification - Part 303-1: Communication profile
integration - IEC 61784 CP 3/1 and CP 3/2 $303.00 $333.00 $363.00
(Please note that this ISA standard is an IEC adoption with
modifications. Therefore, the "Free Preview for Members" option
i... more ANSI/ISA-62453-303-2(103.00.06)-2011 - Field device tool
(FDT) interface specification - Part 303-2: Communication profile
integration - IEC 61784 CP 3/4, CP 3/5 and CP 3/6 $230.00 $250.00
$270.00 (Please note that this ISA standard is an IEC adoption with
modifications. Therefore, the "Free Preview for Members" option
i... more - See more at:
https://www.isa.org/templates/two-column.aspx?pageid=133129#sthash.lAoELmcX.dpuf
