IS std list

7/31/2019 IS std list

1/96

MED

PROGRAMME OF WORK(AS ON 1 April 2008)

Mechanical Engineering Department(MED)

BUREAU OF INDIAN STANDARDSMANAK BHAVAN, 9 BAHADUR SHAH ZAFAR MARG

NEW DELHI 110 002


2/96

1

FOREWORD

A Programme of Work is prepared every year by each Technical Department ofBureau of Indian Standards to indicate the latest position of published IndianStandards, number of amendments issued on particular published standards, monthand year of their last re-affirmation, standards identified for revision or standards in theprocess of revision etc. It also indicates the draft documents at different stages ofprocessing. This Programme of Work for Mechanical Engineering Division Council(MEDC) has been prepared Sectional Committee-wise as on 1 April 2008. The presentscope of MEDC is as follows:

Standardization in the field of Mechanical Engineering covering Boilers andPressure Vessels, Refrigeration and Air-conditioning, Non-Conventional Energy Sources,

Material Handling Systems and Equipments, Chemical Engineering Plants andEquipments, Construction Plant and Machinery, Pumps and Handpumps, Compressors,Blowers, Gas Cylinders, Security Equipments, Mining Equipments, Printing Machinery,Sewing Machines, Water Well Drilling, Photographic Equipment, Utensils and DomesticHardware, Oil and Gas Burning Appliances, Wire Ropes and Wire Products, Gasketsand Packing.

A list of superseded/withdrawn standards, standards covered under CertificationMarks and those standards published in Hindi and bilingual versions are also enclosed.Aspectwise classification of standards published by MED and harmonization positionhas also been provided.

It is hoped that this publication would provide the Indian Standards users a convenienttool for obtaining the latest information about new/revised/upcoming standards, andother activities of Mechanical Engineering Department.

This information is also available on BIS web site: www.bis.org.in

For any other information /clarification, please write to:

SCIENTIST F & HEAD (MECHANICAL ENGINEERING)BUREAU OF INDIAN STANDARDSMANAK BHAVAN, 9 BAHADUR SHAH ZAFAR MARG

NEW DELHI 110 002

Email: [email protected] .in Telefa x No. 011-2323 2509


3/96

CONTENTS

COMMITTEEWISE PROGRAMME OF WORK OFMECHANICAL ENGINEERING DEPARTMENT (MED)

AS ON 01 April 2008

Sl. Sectional Title PageNo. Committee No.

Number

1. MED 01 BOILERS AND PRESSURE VESSELS 12. MED 03 REFRIGERATION AND AIR CONDITIONING 23. MED 04 NON-CONVENTIONAL ENERGY SOURCES 44. MED 06 CONTINUOUS BULK CONVEYING, ELEVATING, 5

HOISTING AERIAL ROPEWAYS AND RELATED EQUIPMENT5. MED 07 MATERIAL HANDLING SYSTEMS AND EQUIPMENT 106. MED 08 MINING TECHNIQUES AND EQUIPMENT 167. MED 10 WIRE ROPES AND WIRE PRODUCTS 208. MED 14 CRANES, LIFTING CHAINS AND RELATED EQUIPMENT 239. MED 16 GAS CYLINDERS 2810. MED 17 CHEMICAL ENGINEERING PLANTS AND 32

RELATED EQUIPMENT11. MED 18 CONSTRUCTION PLANT AND MACHINERY 4012. MED 20 PUMPS 4213. MED 21 DIAMOND CORE AND WATERWELL DRILLING 4514. MED 22 COMPRESSORS, BLOWERS AND EXHAUSTERS 4715. MED 23 DOMESTIC AND COMMERCIAL GAS BURNING 49

APPLIANCES (PRESSURE TYPE)16. MED 24 SECURITY EQUIPMENT 5117. MED 25 PRINTING MACHINERY 5318. MED 26 OIL BURNING APPLIANCES 5419. MED 27 HANDPUMPS 5620. MED 28 MECHANICAL VIBRATION AND SHOCK 5721. MED 29 SEWING MACHINES 6222. MED 30 GASKETS AND PACKING 6622. MED 32 PHOTOGRAPHIC EQUIPMENT 6823. MED 33 UTENSILS, CUTLERY AND DOMESTIC HARDWARE 7224 MED 37 METHODS AND EQUIPMENTS FOR UNDERGROUND 75

GASIFICATION OF LIGNITE AND COAL BED METHANE25 MED 38 EQUIPMENT FOR PETROLEUM, PETROCHEMICAL AND 76

NATURAL GAS INDUSTRIES26. ANNEX A LIST OF INDIAN STANDARDS WITHDRAWN/SUPERSEDED 7727 ANNEX B LIST OF INDIAN STANDARDS NUMBER AND VALID 84

LICENSEES COVERED UNDER CERTIFICATION28 ANNEX C LIST OF ASPECT WISE ANALYSIS OF STANDARDS 8929. ANNEX D LIST OF HINDI AND BILINGUAL INDIAN STANDARDS 9030. ANNEX E HARMONIZATION POSITION 9131. ANNEX F LIST ISO/IEC COMMITTEES WHERE INDIA (BIS) IS 92

P/O MEMBER AND MED IS THE CO-ORDINATINGDEPARTMENT

( ii )


4/96

- 1 -

MED 01 BOILERS AND PRESSURE VESSELS SECTIONAL COMMITTEE

Sc op e - a ) Formulation of stand ards for terminology , ac c ep tanc e tests layo ut of boilers and other aspec ts notc ove red und er the India n Boilers Reg ulations.

b) Prepara tion of co de for Unfired Pressure Vesselsc ) Co -o rdina tion o f work with ISO/ TC 11 Boilers and Pressure Ve ssels.

STANDARDS PUBLISHED

S.No IS Title Reaffirm / Printed

No of amdts

1 *IS 2825:1969 Code for unfired pressure vessels MAR 07 52 IS 8595:1977 Terminology for parameters of stationary

steam boilersMAR 07 1

3 IS 8596:1977 Recommended parameters of stationarysteam boilers

MAR 07

4 IS 8633:1977 Technical requirements for location of boilers installations and boiler houses

MAR 07 1

5 IS 8753:1977 Code for acceptance tests on stationarysteam generators of the power station type

MAR 07

6 IS 9330:1979 Terminology for parameters of waste heatboilers and boilers for special purposes

MAR 07

7 IS 9332:1979 Recommended parameters of waste heatboilers and boilers for special purposes

MAR 07

8 IS 9404:2002 Colour code for identification of pipe linesused in thermal power plants (first revision)

MAR 08

9 IS 13445(PT 1):1992 Suppliers data sheet for industrial water tubeboilers: Part 1 Proposed stage

MAR 07

10 IS 13445(PT 2):1992 Suppliers data sheet for industrial water tubeboilers: Part 2 Post order stage

MAR 07

11 IS 13477:1992 Purchasers data sheet for industrial boilers MAR 0712 IS 13619:1993 Industrial steam and hot water boiler plants -

Maintaining log and summary sheets -Recommendations

JAN 04

13 IS 13979:1994 Method of calculation of efficiency of packaged steam boilers

JAN 04

14 IS 13980:1995 Acceptance tests on industrial boilers - Codeof practice

JAN 04

15 IS 15680:2006 Code for selection of steam traps JUL 0616 IS 15685:2006 Purchaser's data sheet for power boiler OCT 0617 IS 15696:2006 Suppliers data sheet for power boiler OCT 0618 SP:26:1983 ISI steam tables in SI units

DRAFT STANDA RDS FINALIZED BUT NOT YET UNDER PRINTDOC:MED 1(0318) Code for unfired pre ssure vessels (First revision of IS 2825)

* INDICATES STANDARDS UNDER REVISION


5/96

- 2 -

MED 03 REFRIGERATION AND AIR CONDITIONING SECTIONAL COMMITTEE

SCOPE a) Formulation of standa rds for refrigeration and air- c ond itioning equipm ent and ap plianc esinclud ing terminology , definitions and sym bo ls, designa tion of refrigerants, testing ofrefrigerating system s; refrige rating units.

b) Co- ord ination of wo rk with ISO/ TC 86 Refrige ration a nd IEC/ TC 61 Safe ty o f householdelectric al applianc es.

STANDARDS PUBLISHED

SLNO. SLNO IS.NO./ DOC.NO. TITLE REAFFIRM/ PRINTED NO. OFAMDTS1 IS 655:2006 Metal air ducts AUG 06

2 **IS 659:1964 Safety code for air conditioning (revised) MAR 07 1

3 **IS 660:1963 Safety code for mechanical refrigeration(revised)

MAR 07

4 IS 1391(PT1):1992

Room air conditioners: Part 1 Unitary airconditioners (second revision) FEB 04

3

5 IS 1391(PT2):1992

Room air conditioners: Part 2 Split airconditioners (second revision) FEB 04

2

6 ** IS 1474:1959 Commercial refrigerators FEB 04

7 IS 1475(Pt1):2001

Self-contained drinking water coolers(Third revision)

MAR 07

8 **IS 1476(Pt1):2000

Performance of household refrigeratingappliance - Refrigerators with orwithout low temperature compartment:Part 1 Energy consumption andperformance (third revision)

MAR 061

9 IS 1869:1961 Ice cans MAR 07

10 **IS 2167:1983 Bottle coolers (first revision) MAR 07

11 **IS 2370:1963 Sectional cold rooms (walk-in-type) MAR 07

12 IS 2374:1963 Ice tanks MAR 07

13 IS 3315:1994 Evaporative air coolers (desert coolers)(second revision)

FEB 04 2

14 IS 3615:2007 Glossary of terms used in refrigerationand air conditioning (first revision)

NOV 07

15 ** IS 4831:1968 Recommendation on units and symbolsfor refrigeration

MAR 07

16 IS 5038:1969 Ice cube trays for domestic refrigerator MAR 07 1

17

IS 5111:1993 /ISO 917:1989 Testing of refrigerant compressors (firstrevision) FEB 04

18 **IS 7613:1975 Method of testing panel type air filters forair conditioning andventilation purposes

MAR 07

19 IS 7872:1975 Freezers MAR 07 1

20 IS 7896:2001 Data for outside design conditions for airconditioning for Indian cities (firstrevision)

MAR 07 1


6/96

- 3 -

21 IS 8148:2003 Packaged air conditioners (first revision) NOV 03

22 **IS 9210:1979 Display cabinets MAR 07 1

23 **IS 10594:1983 Thermostatic-expansion valves MAR 07

24 ** IS 10609:1983|ISO 817:1974

Refrigerants - Number designation FEB 04

25 *IS 10617(PT1):1983

Hermetic compressors Part 1 Hightemperature application group

MAR 072

26 *IS 10617(PT2):1983

Hermetic compressors: Part 2 Mediumtemperature application group

MAR 07

27 *IS 10617(PT3):1983

Hermetic compressors: Part 3 Lowtemperature application group

MAR 073

28 IS 11327:2007 Requirements for refrigerants condensingunits (first revision)

NOV 07

29 **IS 11328:1985 Self contained automatic ice makers MAR 07

30 **IS 11329:1985 Finned type heat exchangers for room airconditioners

MAR 07 1

31 **IS 11330:1985 Refrigeration oil separator MAR 07

32 * IS 11338:1985 Thermostats for use in refrigerators, airconditioners, water coolers and beveragecoolers etc

FEB 04

33 IS 11561:1986 Code of practice for testing of coolingtowers

MAR 07

34 IS 11951:1987 Pumpset for desert coolers MAR 07 4

35 ** IS 12249:1987 Dessicant driers used in refrigeration MAR 07

36 IS 15750:2006 Household frost free refrigeratingappliances Refrigerators cooled byinternal forced circulation -Characteristics and test methods Specification

DEC 06

* INDICATES STANDARDS UNDER REVISION. ** INDICATES STANDARDS TO BE REVISED / INDICA TES DUAL NUMBERED STANDARDS. | INDICA TES EQUIVALENT STANDARDS

DRAFT STANDARD COMPLETED WIDE CIRCULATION

DOC:MED 03(0875) Spe c ificatio n for wa lk in c old room s ( first Revision of IS 2370)

DOC:MED 03(0877) Spe c ificatio n for herm etic c om pre ssors( first Rev ision of IS 10617(Part 1, 2 an d 3))

DOC:MED 03(0828)C Elec trome c hanic al eva po ration type thermo stats for use in refrige ration and air co nditioningap plia nc es - Spe c ifica tion (first revision of IS 11338)

DOC:MED 03(0965)C Pump set for Desert Coo lers Spe c ificatio n (first revision of IS 11951)


7/96

- 4 -

MED 04 NON- CONVENTIONAL ENERGY SOURCES SECTIONAL COMMITTEE

Sc op e - a) Formulation of standa rds in the field of Non-Co nventional energy sourc es suc h as solar energy,wind energy, bio-ga s energy, bio-ma ss energy etc .

b) Co- ord ination of work with ISO/ TC 180 `Sola r Energy and IEC/ TC 88 Wind ene rgy .

STANDA RDS PUBLISHEDSLNO IS.NO ./ DOC.NO . TITLE REAFFIRM/

PRINTEDNO.OFAMDTS

1 IS 9478:1989 Family size bio-gas plant - Code of practice (secondrevision)

MAR 05

2 IS 12933(PT1):2003

Solar flat plate collector - Specification: Part 1Requirements (second revision)

JUN 032

3 IS 12933(PT2):2003

Solar flat plate collector - Specification: Part 2Components (second revision)

JUN 03 1

4 IS 12933 (PT3):2003

Solar flat plate collector - Specification: Part 3Measuring instruments (first revision)

JUN 031

5 IS 12933(PT5):2003

Solar flat plate collector - Specification: Part 5 Testmethods (secondrevision)

JUL 03 1

6 * IS 12934:1990 /ISO 9488: 1999

Solar energy - Thermal applications - Vocabulary FEB 06

7 IS 12976:1990 Solar water heating systems - Code of practice FEB 06

8 IS 12986(PT1):1990

Bio-gas plants - Glass fibre reinforced polyesterresin gas holders - Specification Part 1 With steelframe

FEB 06

9 **IS 13129(PT1):1991

Solar heating - Domestic water heating systems: Part1 Performance rating procedure using indoor testmethods

MAR 05

10 **IS 13129(PT2):1991

Solar heating - Domestic water heating systems: Part 2Procedures for system performance characterizationand yearly performance predication

MAR 05

11 **IS 13129(PT3):1991

Solar heating - Domestic water heating systems: Part3 Procedures for system component characterizationand predication for yearly performance usingcomponent performance data

MAR 05

12 **IS 13129(PT4):1991

Solar heating - Domestic water heating systems: Part4 Determination of durability and reliability

MAR 05

13 IS 13152(PT1):1991

Solid bio-mass chulha - Specification Part 1Portable (metallic)

FEB 08 2

14 IS 13429(PT

1):2000

Solar cooker - Box type - Specification: Part 1

Requirements (first revision)

FEB 06

15 IS 13429(PT2):2000

Solar cooker - Box type - Specification: Part 2Components (first revision)

FEB 06

16 IS 13429(PT3):2000

Solar cooker - Box type - Specification: Part 3 Testmethod (first revision)

FEB 06 1

DRAFT STANDARD COMPLETED WIDE CIRCULATIONDOC: MED 04(0817) Solar ene rgy - Therma l ap plic ation s - Voc ab ulary

* INDIC ATES STANDARDS UNDER REVISION. ** INDIC ATES STANDARDS TO BE REVISED / INDICA TES DUAL NUMBERED STANDARDS


8/96

- 5 -

MED 06 CONTINUOUS BULK CONVEYING, ELEVATING, HOISTING, AERIALROPEWAYS AND RELATED EQUIPMENT SECTIONAL COMMITTEE

Sc op e - a) Formulation of standa rds for c onve yors, vertica l hoists, buc ket eleva tors, ae rial ropew ay sam usem ent/ joy rides and related e quip me nt like c rushers, sc reens, vibrating m ills etc .and c onve yors for persona l transportation.

b) Co- ordination of work with ISO/ TC 101 Continuous Mec hanic al Hand ling Equipm ent.

STANDA RDS PUBLISHED

SLNOIS.NO./ DOC.NO.

TITLE REAFFIRM/ PRINTED

NO.OF AMDTS

1 IS 3948:1986|ISO 610:1990

Calibrated high tensile steel (round link)chain (electric butt welded) for chainconveyors and coal ploughs used in mines(first revision)

FEB 08 1

2 IS 4240:1984|ISO 2148:1974

Glossary of conveyors terms and definitions(first revision)

FEB 08

3 ** IS 4776(PT

1):1977

Troughed belt conveyors: Part 1 Troughed

belt conveyors for surface installations (firstrevision)

JUL 04

4 ** IS 4776(PT2):1977

Troughed belt conveyors: Part 2 Troughedbelt conveyors for underground installation

APR 04 1

5 ** IS5228:2003

Code of practice for the construction of continuous movement monocable ropewayswith fixed grips intended for transportation of passengers

MAR 08

6 ** IS5229:1998

Aerial ropeways - Transportation of passengers Continuous movementmonocable with automatic grips -

Construction and design - Code of practice(first revision)

SEPT 07

7 ** IS5230:2003

Code of practice for the construction of continuous to-and-fro movement bicableropeways intended for the transportation of passengers

APR 08

8 IS 5563:1985|ISO 1050:1975

Screw conveyors for industrial use (firstrevision)

NOV 05

9 IS 5626:1990|ISO 1082:1990

Chain conveyors - Connector units, shackletype - Specification

NOV 05

10 IS 5895:1985 Specification for steel roller conveyors (firstrevision)

NOV 05

11 IS 6832:1985 Specification for fixing screws and fixingwashers for buckets for bucket elevators(first revision)

NOV 05

12 IS 6833:1973 Specification for bucket for bucket elevators FEB 07

13 ** IS 6834(PT1):1973

Conveyor chains, chain wheels andattachments: Part 1 Chains

APR 04 1


9/96

- 6 -

14 ** IS 6834(PT2):1976

Conveyor chains, chain wheels andattachments: Part 2 Chainwheels

APR 04

15 ** IS 6834(PT3):1976

Conveyor chains, chain wheels andattachments: Part 3 Attachments

APR 04

16 IS 6930:1973 Dimensions for fixing arrangements of buckets for bucket elevators

FEB 07

17 IS 7054:1973 Casing for bucket elevators FEB 07

18 ** IS 7155(PT1):1986 |ISO1819:1977

Code of recommended practice for conveyorsafety: Part 1 General Information (firstrevision)

APR 04

19 ** IS 7155(PT2):1986 |ISO1819:1977

Code of recommended practice for conveyorsafety: Part 2 General safety requirements(first revision)

APR 04

20 ** IS 7155(PT3):1986

Code of recommended practice for conveyorsafety: Part 3 Belt conveyors and feeders(first revision)

APR 04

21 ** IS 7155(PT4):1990

Code of recommended practice for conveyorsafety: Part 4 Vibrating conveyor/feeder (first

revision)

APR 04

22 ** IS 7155(PT5):1990

Code of recommended practice for conveyorsafety: Part 5 Apron conveyors /Apronfeeders (first revision)

APR 04

23 ** IS 7155(PT6):1990

Code of recommended practice for conveyorsafety: Part 6 Selection, Training andsupervision of operators (first revision)

APR 04

24 ** IS 7155(PT7):1990

Code of recommended practice for conveyorsafety: Part 7 Inspection and maintenance(first revision)

APR 04

25 ** IS 7155(PT8):1994

Code of recommended practice for conveyorsafety Part 8 Flight conveyors scraperconveyors) (first revision)

APR 04

26 IS 7167:1974 Code for selection and use of bucket elevators FEB 07

27 IS 7423:1974|ISO 2140:1975

Dimensions for apron conveyors FEB 07

28 IS 7439:1974 Dimensions for Aero slides OCT 03

29 ** IS7465:1974

Portable and mobile troughed belt conveyors APR 04

30

IS 7649:1975 Glossary of terms used in connection withaerial ropeways and cableways FEB 08

31 IS 8531:1986|ISO 1536:1975

Pulleys for belt conveyors (first revision) FEB 08

32 IS 8597:1977 Flat belt conveyors NOV 05

33 IS 8598:1987|ISO 1537:1975

Idlers and idler sets for belt conveyors (firstrevision)

FEB 08

34 IS 8599:1977 Recommendations for selection of apronconveyors

NOV 05


10/96

- 7 -

35 IS 8646:1994 Conveyors - Scrapper (flight) - Generalrequirements (first revision)

APR 04

36 IS 8723:1978|ISO 1049:1975

Dimensions for vibrating conveyors andfeeders with rectangular or trapezoidal trough

FEB 08

37 IS 8730:1997 Classification and codification of bulk materials for continuous material handlingequipment (first revision)

AUG 07

38 IS 9047(PT1):1978

Data sheet for aerial ropeways and cableways:Part 1 Data to be supplied by Intendingpurchaser for aerial system for transportationof goods

FEB 07

39 IS 9047(PT2):1980

Data sheet for aerial ropeways and cableways:Part 2 Data to be supplied by intendingpurchaser for aerial system for transportationof passengers,surface

FEB 07

40 IS 9047(PT3):1983

Data sheet for aerial ropeways andcableways:Part 3 Data to be supplied byintending purchaser for transportation of passenger, of passengers,surface

FEB 08

41 IS 9047(PT4):1983

Data sheet for aerial ropeways andcableways:Part 4 Data to be supplied byintending purchaser for aerial system fortransportation of goods, underground

FEB 08

42 IS 9047(PT6):1980

Data sheet for aerial ropeways andcableways:Part 6 Data to be supplied byintending purchaser for aerial system fortransportation of forestry products

FEB 07

43 IS 9228:1979 Mono seat chairs for chairlifts used in winter

sports

FEB 07

44 IS 9413:1980 Rope guide rollers for haulage ropes of bicable aerial ropeways for transportation of goods

FEB 07

45 IS 9454:1980 Bicable load carriers FEB 07

46 IS 9706:1997 Aerial ropeways for transport of material -Construction and design - Code of practice(first revision)

SEPT 07

47 IS 11168(PT1):1985

Data sheet for aerial ropeways and cablewaysto be provided to intending purchaser anduser Part 1 Data to be supplied for aerialropeways system for transportation of goods.surface

NOV 05

48 IS 11592:2000 Code of practice for selection and design of belt conveyors

NOV 05 1

49 IS 11619:1986|ISO 5612:1990

Scrapers bar for armoured face conveyors FEB 08

50 IS 12059:1987|ISO 3922:1978

Dimensions for rotary vane feeders FEB 08


11/96

- 8 -

51 IS 12060:1987 Code of practice for selection of rotary vanefeeders

FEB 08

52 IS 12101:1987 Roller type hold-back device FEB 08

53 IS 12108:1987 Code of practice for selection of rotary tablefeeders

FEB 08

54 IS 12204:1987 Code of practice for selection of reciprocating

feeders

FEB 08

55 IS 12215:1987 Code of practice for selection of belt feeders FEB 08

56 IS 12400:1988 Code of practice for selection of electromagnetic feeders

FEB 08

57 IS 12401:1988 Code of practice for selection of mechanicalvibrating feeders

FEB 08

58 IS 12907:1990 Screw feeder Purchasers data sheet NOV 05

59 IS 12941:1990 Code of practice for selection and use of super capacity bucket elevator

NOV 05

60 IS 12959:1990 Technical supply requirements for sprocketwheels for link chains

FEB 07

61 IS 12960:1990 /ISO 7119:1981

Determination of power requirements of screw feeders General requirements

NOV 05

62 IS 12961:1990 U-Link for chains for bucket elevators Specification

NOV 05

63 IS 13324:1992 Screw feeders General requirements FEB 08

64 ** IS14169:1994

Recommendations for type selection of feeders

APR 04

65 IS 14188:1994 Conveyor systems - Maintenance facilities -Design parameters

NOV 05

66 IS 14386:1996 Belt conveyors - Travelling tripper -Motorised-for belt widths 650 mm to 1600mm - Dimensions

FEB 07

67 IS 15475(Part1):2004

Code of recommended practice foramusement rides safety Part 1: Generalinformation

SEP 04

68 IS 15475(Part2):2004

Code of recommended practice foramusement rides safety Part 2: Safetyrequirements

SEP 04

69 IS 15475(Part3):2004

Code of recommended practice foramusement rides safety Part 3 Design,

SEP 04


12/96

- 9 -

manufacture and erection

70 IS 15475(Part4):2004

Code of recommended practice foramusement rides safety Part 4: Selection,training and supervision of operators

SEP 04

71 IS 15475(Part5):2004

Code of recommended practice foramusement rides safety Part 5: Operation andmaintenance procedures

SEP 04

72 IS 15475(Part6):2004

Code of recommended practice foramusement rides safety Part 6: Performancetests

SEP 04

73 IS 15492(part1):2004

Code of recommended practice for safety inwater parks: Part 1 General information

JUN 04

74 IS 15492 (Part2):2004

Code of recommended practice for safety inwater parks: Part 2 Safety requirements

JUN 04

75 IS 15492(Part3):2004

Code of recommended practice for safety inwater parks: Part 3 Instructions

JUN 04

76 IS 15530:2004 /ISO1977:2004

Conveyor chains, attachments and sprockets -Specification

SEP 04

77 IS 15534:2004 /ISO 5031:1977

Continuous mechanical handling equipmentfor loose bulk materials - Coupling and hosecomponents used in pneumatic handling -Safety code

NOV 04

78 IS 15535:2004 /ISO 2327:1972

Pneumatic handling appliances for loose bulk materials - Piping

NOV 04

79 IS 15536:2004 /ISO 3284:1974

Continuous mechanical handling equipmentfor loose bulk materials - Dimensions of bends for use in pneumatic handling

NOV 04

* INDIC ATES STANDARDS UNDER REVISION. ** INDIC ATES STANDARDS TO BE REVISED / INDICA TES DUAL NUMBERED STANDARDS. | INDICA TES EQUIVALENT STANDARDS


13/96

- 10 -

MED 07 MATERIAL HANDLING SYSTEMS AND EQUIPMENT SECTIONAL COMMITTEE

Scope - 1 ) Formulation of stand ards for terminology , ge neral design and c onstruction,c lassific ation, ratings, lead ing dim ensions, safety co de of operation andma intenanc e and testing and inspec tion methods o f mec hanica l,pneuma tic a nd hydraulic b ulk handling systems and eq uipment for loose bulkma terial includ ing fluid ma terial and unit load s (other than those c ove red byConvey ors, Vertic al Hoists and Buc ke t Eleva tors Sec tiona l Com mittee , MED 6)

suc h a s:

a ) Unloading equipm ent such as wag on tipplers, wag on m arshalling equipm ent,wag on unload ing equipm ent and ship un-loaders

b) Stac king and loading equipm ent suc h as stac kers, recla imers, ship, wag onand truck loa ders

c ) Hydraulic co nveying equipm ent such as co al and ash c onveyingequipment

d) Pneum atic c onvey ing eq uipm ent suc h as food grains, c em ent, fertilizer, ash andpulverized conveying equipment;

e) Batc hing and b ag ging equipm ent such as automa tic b ag filling ma chines and a utomatic weighingand bag ging equipment

f) Earth-mo ving ma c hinery and equipm ent.g) Non-powe red ma terial handling equipm ent such a s hand-trucks, platform trucks,

Lifting tab les, pallet trucks, stillag e lifting trucks and all type s of trolleys, whee l ba rrows2) Co- ordina tion of wo rk with ISO/ TC 127 ` Earth Moving , Ma c hinery and ISO/ TC 110

`Ind ustrial Trucks.


SLNO IS.NO./ DOC.NO. TITLE REAFFIRM / PRINTED

NO.OFAMDTS

1 IS 2431:1963 Steel wheel barrows (single wheel type) FEB 07

2 IS 4184:1967 Steel wheel barrows (with two wheels) FEB 07 1

3 *IS 4988(PT 2):1968 Glossary of terms and classification of earthmoving machinery: Part 2 Dozers

FEB 07

4 *IS 4988(PT 3):1968 Glossary of terms and classification of earthmoving machinery: Part 3 Motor and towedscrappers

FEB 07

5 *IS 4988(PT 4):1968 Glossary of terms and classification of earthmoving machinery: Part 4 Excavators

FEB 07

6 *IS 4988(PT 5):1968 Glossary of terms and classification of earthmoving machinery: Part 5 Motor graders

FEB 07

7

IS/ISO 507:1996(SupersedingIS 5007:1988)

Dimensions for hand pallet trucks OCT 07

8 IS 5324:1996 Hand operated stillage truck - Lifting truck (hand elevating) - Specification (secondrevision)

FEB 07

9 IS 5387:1969 /|ISO 1756:1975

Dimensions for stillages SEP 07 2


14/96

- 11 -

10 IS 5972:1970 Glossary of pneumatic and hydraulicconveyor terms and definitions

FEB 06

11 * IS 6839(PT1):1994

/ISO 2163:1975

Glossary of terms relating to non-poweredmaterials handling equipment, Part 1 Castorsand wheels (first revision)

FEB 07

12 *IS 6839(PT2):1998

Glossary of terms relating to non-poweredmaterials handling equipment, Part 2 Handtrucks and trolleys (first revision)

OCT 03

13 *IS 7261:1985 /|ISO2184:1972

Dimensions of top-plates for castors (firstrevision)

FEB 07

14 *IS 7369:1983 Specification for wheels and castors (firstrevision)

FEB 07 1

15 IS 7439:1974 /|ISO2326:1972

Dimensions for aero slides OCT 03

16 IS 8015:1996 Hand trolley for oil drums (first revision) FEB 07

17 IS 8016:1996 Hand trolley for gas cylinders (oxygen anddissolved acetylene) for industrial use (firstrevision)

FEB 07

18 IS 8049:1988 Specification for platform trucks (secondrevision)

FEB 07

19 *IS 8647:1977 Design criteria for pneumatic conveyingsystems

FEB 06

20 IS 9248:1996 /ISO 9248:1992

Earth moving machinery - Units fordimensions, performance and capacities andtheir measurement accuracies

FEB 07

21 IS 9776:1981 Data sheet for selection of weighing-cum-tipping/bag filling machines for bulk handling equipment

FEB 07

22 IS 9777:1981 Data sheet for selection of weigh bridges forbulk handling equipment

FEB 07

23 IS 10095:1982 Guidelines for selection of tipplers for broadgauge open railway wagons

FEB 07

24 IS 10223:1982 General requirements for tow-castors systemfor transportation of freight containers

SEP 07

25 IS/ISO 6750:2005(SupersedingIS 10280:1993)

Earth-moving machinery - Operation andmaintenance Format and content of manuals

OCT 07

26 IS 10303:1993 /ISO6749:1984

Earth moving machinery - Preservation andstorage (first revision)

OCT 03

27 IS 10443:2007 Data sheet for selection of marine loadingarms (first revision)

FEB 07

28 IS 10463(PT2):1985 Glossary of terms for bulk handlingequipment: Part 2 Stacking Loading andeclaiming equipment

AUG 04

29 IS 10463(PT 6):1983 Glossary of terms for bulk handlingequipment Part 6 Cyclic loose bulk handling equipment (non-stationary)

OCT 03

30 IS 10464:1983 Data sheet for selection of wagon OCT 03 1


15/96

- 12 -

puller/pusher

31 IS 10506:1996 Trolleys for carrying jute bales -Specification (First Revision)

FEB 07

32 IS 10525:1983 Specification for general purpose drinkingwater trolley

FEB 07 1

33 IS 10678:1983 Data sheet for design and selection of vacuum producer

OCT 03

34 IS 10689:199 / ISO 2860:1992 Earth moving machinery - Minimum accessdimensions (first revision) FEB 06

35 *IS 10704:1999 /ISO 2867:1994

Earth moving machinery - Access system(second revision)

AUG 04

36 IS 10856:1993 /ISO6484:1986

Earth-moving machinery - Elevatingscrapers - Volumetric ratings (first revision)

OCT 03

37 IS 10859:1993 /ISO 6483;1980

Earth-moving machinery - Dumper bodies -Volumetric ratings (first revision)

OCT 03

38 IS 11113:1999 / ISO 5353:1995

Earth moving machinery and tractors andmachinery for agriculture and forestry - Seatindex point (second revision)

AUG 04

39 IS 11114(PT 2):2006 /ISO 6746-1:2003

Earth-moving machinery - Definitions of dimensions and symbols: Part 2 Basemachines (second revision)

AUG 06

40 IS 11114(PT 3):2006 /ISO 6746-2:2003

Earth-moving machinery - Definitions of dimensions and symbols: Part 3 Equipment(second revision)

AUG 06

41 IS/ISO 7131:1997(SupersedingIS 11114(PT4):1993)

Earth-moving machinery Loaders---Terminology and commercial specifications

DEC 07

42 *IS 11115:1999/ ISO3411:1995

Earth moving machinery - Human physicaldimensions of operators and minimumoperator space envelop (first revision)

AUG 04

43 IS 11249:1985 Data sheet for selection of front end loaders AUG 04

44 IS 11252:1993 /ISO 6682:1986

Earth-moving machinery - Zones of comfortand reach for controls (first revision)

OCT 03

45 IS 11496:1985 General and performance test requirementsof pallet truck and stillage truck

FEB 07

46 IS 11738(PT 1):1993 Bulk handling equipment - Crawler tractors -Data sheet : Part 1 Information to besupplied by purchaser (first revision)

OCT 03

47 IS 11738(PT 2):1993 Bulk handling equipment - Crawler tractors -Data sheet, Part 2 Information to be suppliedby manufacturers/suppliers (first revision)

OCT 03

48 IS 12137:1987 General requirements of wagon puller/pusher SEP 07

49 *IS 12138:1993 /ISO6165:1987

Earth-moving machinery - Basic types -Vocabulary (first revision))

NOV 03


16/96

- 13 -

50 IS 12140:1987 Data sheet for selection of dumpers AUG 04

51 *IS 12192:1993 /ISO 7451:1983

Earth-moving machinery - Hydraulicexcavators - Hoe type buckets - Volumetricratings (first revision))

NOV 03

52 IS 12206:1993 /ISO 7546:1983

Earth-moving machinery - Loader and frontloading excavator buckets - Volumetricratings (first revision)

NOV 03

53 IS 12209:1993 /ISO7130:1981 Earth-moving machinery - Guide toprocedure for operator training (firstrevision)

NOV 03

54 IS 12359:1988 Guide for selection of wheels and castors FEB 07

55 IS 12402(PT 1):1988 Mobile containers for solid waste, Part 1General characteristics

FEB 07

56 IS 12402(PT 2):1988 Mobile containers for solid waste, Part 2Methods of test

FEB 07

57 IS 12567:1989|ISO 3284:1974

Pneumatic handling equipment - Bends -Dimensions

NOV 03

58

IS 12645:1993 /ISO9246:1988 Earth-moving machinery - Crawler andwheel tractor dozer blades - Volumetricratings (first revision)

NOV 03

59 IS 12663(PT 1):1989 Bulk handling equipment - Reclaimer - Datasheet for selection: Part 1 Scraper reclaimer(Rail Mounted)

NOV 03

60 IS 12663(Pt 2):1999 Bulk handling equipment Reducer - Datasheet for bucket wheel reclaimer (railmounted): Part 2 Information to be suppliedby the purchaser

FEB 06

61 IS 12663(Pt 3):2000 Bulk handling equipment Reducer - Datasheet for bucket wheel reclaimer (railmounted): Part 3 Information to be suppliedby the manufacturer

FEB 06

62 IS 12669(PT 1):1989 Bulk handling equipment Hydraulicexcavator Data sheet for selection

NOV 03

63 IS 13065:1991 Bulk handling equipment - Wagonmarshalling equipment Endless rope type -General requirements

FEB 07

64 IS 13076:1991 Specification for hand trolley for carryingmail bags

SEP 07

65 IS 13081:1991 Earth moving machinery - Symbols -Guidelines for development and evaluation FEB 07

66 IS 13082(PT 1):1991 Bulk handling equipment - Ship unloader -Gantry mounted grab type - Code of practicefor design, manufacture and eection: Part 1Mechanical and structural requirements

FEB 07

67 IS 13082(PT 2):1991 Bulk handling equipment - Ship unloader -Gantry mounted grab type - Code of practice

FEB 07


17/96

- 14 -

for design, manufacture and erection, Part 2Electro-mechanical -Requirements

68 IS 13082(PT 3):1991 Bulk handling equipment - Ship unloader -Gantry mounted grab type - Code of practice for design, manufacture anderection, Part 3 Information to be suppliedby purchaser and the manufacturer

FEB 07

69 IS 13113:1991 Bulk handling equipment - Wagonmarshalling equipment Endless rope type -Data sheet

FEB 07

70 I S 13116:2006 /ISO 9249:1997

Earth moving machinery - Engine test code -Net power (second revision)

SEP 06

71 IS 13148(Pt 1):1999 /ISO 5049-1:1994

Mobile equipment for continuous handlingof bulk materials - Rules for the design of steel structures

AUG 04

72 IS 13253:1992 /ISO 8925:1989

Earth-moving machinery - Diagnostic ports NOV 03

73 IS 13652:1993 Bulk handling equipment - Dumper -Supplier's data sheet NOV 03

74 IS 13685(PT 1):1993 Bulk handling equipment - Ship loader -Data sheet for selection Part 1information tobe supplied by the purchaser

NOV 03

75 IS 13685(PT 2):1993 Bulk handling equipment - Ship loader -Data sheet for selection Part 2 Information tobe supplied by manufacturer/supplier

NOV 03

76 IS 13768:1999 /ISO 3164:1995

Earth moving machinery - Laboratoryevaluations of protective structure-Specification for deflection limiting volume

(first revision)

SEP 07

77 IS/ISO 3449:2005(SupersedingIS 13769:1993)

Earth moving machinery - Falling-objectprotective structures - Laboratory tests andperformance requirements

NOV 07

78 IS 13811:1993 Air cargo (bulk) trolley - Specification FEB 07

79 IS 13936:1994 Bulk handling equipment - Wheeled loaders- General requirements

NOV 03

80 IS 13945:1994 Bulk handling equipment - Baggingmachines (electronic type) ta sheet AUG 04

81 IS 13951:1994 Heavy item lift platform for Aircraft/Airport

operations General requirements

FEB 07 1

82 IS 13989:1994 Bulk handling equipment - Baggingmachines (mechanical type) - Design andconstruction - General requirements

AUG 04

83 IS 13992:1994 Bulk handling equipment - Baggingmachines (electronic type) - Design andconstruction - General requirements

AUG 04

84 IS 14130:1994 Hydraulic lifting table Specification FEB 07


18/96

- 15 -

85 IS 14416:1996 Bulk handling equipment - Bucket wheelreclaimer rail mounted type - Design,manufacture and erection - Code of practice

FEB 07

86 IS 14417:1996 Bulk handling equipment - Single boomslewable stacker Rail mounted - Design,manufacture and erection Code of practice

FEB 07

87 IS 14418:1996 Bulk handling equipment - Ship loader - Railmounted - Design, manufacture anderection Code of practice

FEB 07

88 IS 14704:1999

Bulk handling equipment - Bag stacker-cum-loader - Portable Design and construction General requirements

AUG 04

89 IS 15367(PT 1):2003 Bulk handling equipment - Stacker (Railmounted) Part 1 General requirements

AUG 03

90 IS 15367(PT 2):2003

Bulk handling equipment - Stacker (railmounted) Part 2 Information to be suppliedby the purchaser

AUG 03

91 IS 15367(PT 3):2003 Bulk handling equipment - Stacker (rail

mounted) Part 3 In formations to besupplied by the manufacturer

AUG 03

INDICATES STANDARDS UNDER REVISION. ** INDIC ATES STANDARDS TO BE REVISED / INDICA TES DUAL NUMBERED STANDARDS. | INDICA TES EQUIVALENT STANDARDS

DRAFT STANDA RDS UNDER PRINT DOC: MED 07(0949) Draft Indian Standard Earth-Moving Machinery Access SystemsDOC: MED 07(0950) Draft Indian Standard castors And Wheels Requirements For

Applications Up To 1.1 M/S (4 Km/H)DOC: MED 07(0951) Draft Indian Standard Castors and Wheels Requirements for Applications Over 1.1 M/s (4km/H)

AND UP TO 4.4 M/s (16 Km/h)

DRAFT COMPLETED WIDE CIRCULATION

DOC: MED 07(0988) Earth moving machinery - Human physical dimensions of operators and minimum operator space envelop (first revision) (Revision of IS 11115:1999)

Doc: MED 07(0989) Earth-moving machinery - Basic types - Vocabulary (first revision) (Revision of IS 12138:1993)Doc: MED 07(0990) Earth-moving machinery - Hydraulic excavators - Hoe type buckets - Volumetric ratings

(first revision) (Revision of IS 12192:1993)DOC: MED 07(0991) Castors and wheels Vocabulary symbols and multilingual terminology (Adoption of ISO 22877)


19/96

- 16 -

MED 08 MINING TECHNIQUES AND EQUIPMENT SECTIONAL COMMITTEE

Sc op e - a) Formulation of Indian Standa rds relating to ba sic mining tec hniques and equipm ent.b) Coordina tion of work with ISO/ TC 82 Mining'

STANDA RDS PUBLISHEDSLNO IS.NO ./ DOC.NO . TITLE REAFFIRM/

PRINTEDNO.OFAMDTS

1

**IS 4001:1995 Mine tubs - Specification (second revision) OCT 052 IS 4005:1967 Tungsten carbide for mining tools JUL 04 1

3 *IS 4791:1968 Glossary of mining terms (drainage) JUL 04

4 * IS 4792:1968 Glossary of mining terms (ventilation) JUL 04

5 *IS 4863:1968 Glossary of mining terms (drilling andblasting)

JUL 04

6 *IS 5028:1969 Glossary of mining terms (planning andsurveying)

JUL 04

7 ** IS 5114:1969 Reflectorized signs for mines JUL 04

8 *IS 5307:1969 Glossary of mining terms (boring andexploration)

JUL 04

9 *IS 5767:1970 Glossary of mining terms (strata control) JUL 04

10 *IS 5768:1970 Glossary of mining terms (winning andworking)

JUL 04

11 *IS 5814:1970 Glossary of mining terms (shaft andassociated equipment)

JUL 04

12 *IS 5940:1970 Glossary of mining terms (geology) JUL 04

13 IS 7577:1986 Gas testing flame safety lamps (firstrevision)

JUL 041

14 **IS 7578:1975 Wedge and slot type roof bolt OCT 0515 *IS 7580:1975 Glossary of mining terms (transport) JUL 04

16 IS 7586:1975 Friction props for mines JUL 04 1

17 IS 7587(PT1):2004

Cage suspension gear for winding in minesPart 1 General requirement (first revision)

OCT 04

18 IS 7587(PT2):2006

Cage suspension gear for winding in minesPart 2 Capples (second revision)

SEP 06

19 IS 7587(PT3):2006

Cage suspension gear for winding in mines:-Specification Part 3 Shackles and pins (first

revision)

MAY 06

20 IS 7587(PT4):2006

Cage suspension gear for winding in minesPart 4 Bridle chains

AUG 06

21 IS 7587(PT5):2006

Cage suspension gear for winding in mines- Specification Part 5 Distribution plates(first revision)

JUN 06

222 IS 7587(PT

6):2006Cage suspension gear for winding in mines Specification Part 6 Safety detachinghooks (4 plate type) 80 and 100 kN

AUG 06


20/96

- 17 -

Capacity (first revision)

23 **IS 7587(Pt7):2000

Cage suspension gear for winding in minesPart 7 Safety detaching hooks (4 plate type)120, 150 and 200 kN capacity

OCT 05

24 IS 7587(PT8):1993

Winding in mines - Suspension gear part 8Clivey hook suspension arrangements

JAN 04

25 IS 7974(PT1):1976|ISO 710-1:1974

Graphical symbols for use on detailed maps,plans and geological cross sections:Part 1General rules of representation

JUL 04

26 IS 7974(PT2):1977|ISO 710-2:1974

Graphical symbol for use on detailed maps,plans and geological cross sections Part 2Representation of sedimentary rocks

JUL 04

27 IS 7974(PT3):1976

|ISO 710-3:1974

Graphical symbols for use on detailed maps,plans and geological cross sections: Part 3Representation of magnetic rocks

JAN 04

28 *IS 8003:1976 Wheel axle assemblies for mine cars JUL 04 1

29 IS 8066:1976 Mine cars JUL 04 130 IS 8166:1988

|ISO1717:1974

Rotary drill bits for drilling principally incoal

JAN 04

31 **IS 8266:1976 Expansion shell type roof bolts JUL 04

32 **IS 8421:1977 Hydraulic props JUL 04

33 IS 8473:1988 Link bars used in mines (first revision) JAN 04

34 IS 8534(PT 1):2005

Mine tub couplings and drawbars Part 1General requirements (second revision)

Feb 05

35 **IS 8534(PT2):1995

Mine tub couplings and drawbars: part 2 Clink and D-shackle type (first revision)

OCT 05 1

36 **IS 8534(PT3):1995

Mine tub couplings and drawbars Part 3 R-Shackle and link type (first revision)

OCT 05

37 **IS 8534(PT4):1995

Mine tub couplings and drawbars Part 4 F-Shackle and link type (first revision)

OCT 05

38 IS 8534(PT

5):2005Mine tub couplings and drawbars: Part 5Drawbars (first revision)

MAR 05

39 **IS 8534(PT6):1995

Mine tub couplings and drawbars: Part 6Hook and D-shackle type

OCT 05 1

40 IS 9011:1978 Skip p suspension gear for winding in mines JUL 04 1

41 **IS 9123:1979 Battery locomotives for use in mines OCT 05

42 * IS 9170(PT1):1979

Endless haulage clips: Part 1 Generalrequirements

OCT 05

43 * IS 9170(PT2):2005

Endless haulage clips: Part 2 Screw clip,camclip, smallmanclip And wedgeclip

OCT 05

44 * IS 9170(PT3):2005

Endless haulage clips: Part 3 Lashing chain OCT 05


21/96

- 18 -

45 **IS 9171:1979 Code of practice for maintenance and use of friction and hydraulic props and link bars

JUL 04

46 IS 9192:1979 Flame proof hand-held rotary drillingmachine for use in mines

JUL 04

47 ** IS 9203(PT1):1979

Friction rollers for mine haulage tracks: Part1 Technical supply conditions

JUL 04

48 ** IS 9203(PT2):1979

Friction rollers for mine haulage tracks:Part 2 Parallel rollers

JUL 04

49 ** IS 9203(PT3):1979

Friction rollers for mine haulage tracks: Part3 Tapered and vertical rollers andhorizontal and vertical pulleys

JUL 04

50 ** IS 9203(PT4):1979

Friction rollers for mine haulage tracks: Part4 Rollers with non-metallic rope bearingssurfaces

JUL 04

51 ** IS 9227:1979 Friction roller mountings for mine haulagetracks

JUL 04

52 IS 9239:1999 Cast sheaves for winding in mines (firstrevision)

JUL 041

53 IS 9494:1980 Manriding cars used in mines OCT 05

54 IS 9910:1981 Method for braze strength testing of coaland rock cutting tools with laid-on tungsten-carbide tips

JUL 04

55 IS 9999:1981 Diesel locomotives for use in mines JAN 04 1

56 IS 10046:1981 Dog spikes for mine haulage tracks JAN 04

57 IS 10202:1982 scrapers used in mines JAN 04

58 IS 10970:1984 Keps for mine cages OCT 05

59

IS 11311:1985 Technical requirements for loaders for usein underground mines JUL 04

60 IS 11862:1986 Hydraulic loadcell OCT 05

61 IS 12450(PT1):1988

Steel headframes for mines Part 1 Principlesof load computation and applicable factorsof safety

JAN 04

62 **IS12464:1988

Methods of test for roof bars used in mines JUL 04

63 IS 12488:1988 Haulage rope cappels JAN 04

64 IS 12489:1988 Recommendations for fitting terminal wire

rope sockets by the cone and ail method

J AN 04

65 IS 12526:1988 Specification for bucket for shaft sinkingoperations in mines

JAN 04

66 IS 12527:1988 General requirements for riders for bucketsused in shaft sinking operations in mines

JAN 04

67 IS 13163:1991 Mine haulage tracks - Laying - Code of practice

OCT 05

68 **IS13201:1991

Mine haulage tracks - Rails and fish plates -General requirements

OCT 05


22/96

- 19 -

69 **IS13202:1992

Mine haulage tracks - General requirements JAN 04

70 **IS13210:1991

Mine haulage tracks - Switches andcrossings - General requirements

OCT 05

71 **IS13219:1992

Rock bolts for mines (cement grouted) -General r requirements

JAN 04

72 **IS 13220:1990 Friction props Hydraulic setting device General requirements

JUL 04

73 IS 13230:1992 Graphical symbols for use on mine plans JAN 04

74 IS 13282:1991 Mine haulage tracks - Track sleepers -General requirements

OCT 05

75 **IS13517:1992

Rock bolts - Resin type - Specification JAN 04

76 IS 13618:1992 Mine haulages - Direct rope (50 to 150 kW) General requirements

JAN 04

77 IS 14352:1996 Miners safety goggles - Specification MAR 07

78 IS 14480:2006 Side dump loader (SDL) - Operation andmaintenance Code of practice (firstrevision)

JULY 06

79 IS 14567:1999 Winding in mines - Design of cages -Guideline

JAN 04

80 IS14778:2000

Optical methanometer (Interferometer type)- Portable Specification

JUL 04

* INDIC ATES STANDARDS UNDER REVISION. ** INDIC ATES STANDARDS TO BE REVISED| INDICATES EQUIVA LENT STANDA RDS

DRAFT INDIA N STANDARDS UNDER PRINTDOC: ME 08(0831) Wheel ax le assemb lies for min e cars - Spe c ificat ion (first revision of IS 8003)

DOC:ME 08( 0832) Glossary of min ing term s (Am alg am atio n of IS 1471:1968, IS 4792:1968, IS 4863:1968, IS 5028:1969,IS 5307:1969, IS 5767:1970, IS 5768:1970

DRAFT INDIAN STANDARD APPROVED FOR WIDE CIRCULATIION

DOC: ME 08(0932) Mine haula ge trac ks Rails an d fish pla tes Switc hes and c rossings Lay ing General requirements (Amalgamating of IS 13163:1991, IS 13201:1991, IS 13202:1992 andIS 13210:1991)

DOC:ME 08(0948) Tec hnic al req uirem ents for loa de rs for use in und erg round mines (first revision of IS 11311:1985)


23/96

- 20 -

MED 10 WIRE ROPES AND WIRE PRODUCTS SECTIONAL COMMITTEE

Sc op e - a) Formulation o f standa rds on wire ropes and standa rds for strand s for differentpurpo ses; wire prod uc ts, wire rop es and fittings.

b) Co- ord ination of wo rk with ISO/ TC 82 Mining and ISO/ TC 105 Wire rope s.

STANDA RDS PUBLISHEDSLNO

IS.NO./ DOC.NO.TITLE REAFFIRM/

PRINTEDNO.OFAMDTS

1 * IS 278:1978 Galvanized steel barbed wire for fencing(third revision)

SEP 06 4

2 IS 1855:2003 Stranded steel wire ropes for winding andman riding haulages in mines (secondrevision)

JUL 03

3 IS 1856:2005 Steel wire ropes for haulage purposes (thirdrevision)

FEB 05 1

4 IS 2140:1978 Stranded galvanized steel wire for fencing(first revision)

SEP 06

5 IS 2141:2000 Hot dip galvanized stray strand -Specification (fourth revision)

NOV 05

6 *IS 2265:1978 Galvanized steel wire strand for signallingpurpose (first revision)

SEP 06 1

7 IS 2266:2002|ISO 2408:1973

Steel wire ropes for general engineeringpurposes (fourth revision)

SEP 07

8 ** IS2315:1978

Thimbles for wire ropes (first revision) SEP 06

9 IS 2361:2002 Bulldog grips - Specification (third revision) AUG 07

10 IS 2363:1981 Glossary of terms relating to wire ropes (firstrevision)

SEP 06

11 IS 2365:1977 Steel wire suspension ropes for lifts, elevatorsand hoists (first revision)

SEP 06

12 IS 2485:1979 Drop forged sockets for wire ropes for generalengineering purposes (first revision)

SEP 06

13 IS 2581:2002 Round strand galvanized steel wire ropes forshipping purposes (fourth revision)

SEP 07

14 IS 2721:2003 Galvanized steel chain link fence fabric(second revision)

JUL 03

15 IS 2759:1969 Higher tensile steel point hooks for use withwire rope thimbles

JUL 07 2

16 *IS2762:1982

Wire ropes slings and sling legs (firstrevision)

SEP 06

17 IS 3121:1981 Rigging screws and stretching screws (firstrevision)

SEP 06 1

18 *IS 3374:1983|ISO 2020:1973

Preformed steel wire ropes for aircraftcontrols (first revision)

SEP 06

19 IS 3459:2004 Small wire ropes - Specification (second DEC 04


24/96

- 21 -

revision)

20 IS 3623:1978 Guide and rubbing ropes (first revision) SEP 06

21 IS 3626:2001 Locked coil winding ropes Specification(second revision)

NOV 05

22 IS 3937(PT1):1974 |ISO3189-1:1977

Recommendations for socketing of wire ropes:Part 1 Socketing with zinc (first revision)

SEP 06

23 IS 3937(PT2):1974

Recommendations for socketing of wireropes: Part 2 Socketing with white metal (firstrevision)

SEP 06

24 IS 3937(PT3):1994

Recommendations for socketing of wire ropesPart 3 Socketing with resins JAN 04

25 ** IS3973:1984

Code of practice for the selection, installationand maintenance of wire ropes (first revision)

SEP 06

26 IS 4521:2001 Wire ropes used in oil wells and oil welldrilling (second revision)

SEP 06

27 IS 4948:2002 Specification for welded steel wire fabric for

general use (second revision)

NOV 07

28 **IS 5245(PT1):1969

Methods for splicing of wire ropes Part 1Hand splicing of wire ropes

SEP 06

29 **IS 5245(PT2):1971

Methods for splicing of wire ropes : Part 2Wire rope sling legs with ferrule-secured eyeterminal

SEP 06 2

30 IS 5836:1977 Inner wire ropes for automobile control cables(first revision)

SEP 06

31 **IS 6594:2001 /ISO 2408:1973

Technical supply conditions for steel wireropes and strands (second revision)

SEP 06

32 IS 9282:2002 Wire ropes and strands for suspension bridges(first revision) AUG 07 1

33 IS 10887:2001 Steel wire rope for winches and ropewaysused in forestry and agriculture (first revision) SEP 06

34 IS 10891(PT1):2001

Steel wire ropes for aerial ropeways Part 1Haulage ropes (first revision)

SEP 06

35 **IS 10891(PT2):1986

Steel wire ropes for aerial ropeways Part 2Track ropes

SEP 06

36 IS 10942:2000 Ferrules - Specification (first revision) NOV 05

37 IS 12694:1993/

ISO 8369:1986

Large diameter steel wire ropes (first

revision)

JUL 02

38 IS 12735:1994 /ISO 8792:1986

Wire rope slings - Safety criteria andinspection procedures for use (first revision)

JAN 04

39 IS 12776:2002 Galvanized strand for earthing (first revision) JUN 07

40 IS 13869:1993/ ISO10092:1990

High breaking load steel wire ropes -Specification

JUL 02

41 **IS 13870(PT1):1993 /ISO

Cranes and lifting appliances - Selection of wire ropes Part 1 General

JUL 02


25/96

- 22 -

4308-1:1986

42 IS 13870(PT2):1993 /ISO4308-2:1988

Cranes and lifting appliances - Selection of wire ropes: Part 2 Mobile cranes - Coefficientof utilization

JUL 07

43 IS13902(PT1):1993 /ISO 3189-1:1985

Sockets for wire ropes for general purposes:Part 1 General characteristics and conditionsof acceptance

JUL 07

44 IS 13902(PT2):1993 /ISO3189-2:1985

Socket for wire ropes for general purposes:Part 2 Special requirements for socketsproduced by forging or machined from thesolid

JUL 07

45 IS 13902(PT3):1993/ISO3189-3:1985

Socket for wire ropes for general purposes:Part 3 Special requirements for socketsproduced by casting

JUL 07

46 IS13917:2003

|ISO 3154:1988

Stranded wire ropes for mine hosting -Technical delivery requirements(first

revision)

AUG 03


DRAFT STANDA RDS COMPLETED WIDE CIRCULATIO N1) DOC:MED 10(0857)C Draft India n Stand ard wire rope slings and sling leg s Spe c ifica tion (seco nd revision of IS 2762)

2) DOC:MED 10(0858)C Ddraft India n Stand ard ga lvanized steel wire strand for signa ling purpo ses(second revision of IS 2265)

3) DOC:MED 10(0977)C Draft Indian stand ard Ga lvanized steel ba rbed wire for fenc ing Spe c ifica tion (fourth revision of IS 278)

4) DOC MED10(0978)C Draft am end ment no. 1 to IS 10942:200 Ferrule Spe c ificatio n (first revision)5) DOC MED 10(0979)C Draft am end me nt no. 2 to IS 12776:2002 Ga lvanized strand for ea rthing Spe cific ation (first revision)

DOCUMENTS UNDER PRINTING 1) DOC MED 10(0974)C Draft am end me nt no. 2 to IS 1856:2005 Stee l Wire Rop es for Haula ge Purpo ses- Spe c ificatio n (third

revision)2) DOC MED 10(0975)C Draft am end ment no. 1 to IS 1855: 2003 Stranded Steel Wire Ropes For Winding And Man-Riding )

Haulag es In Mines Spe cific atio n (Second Revision 3) DOC MED 10(0976)C Draft am end me nt no. 2 to IS 13917:2003 Strand ed Wire Rop es for Mine Hoisting Tec hnic al

Delive ry Delive ry Req uirem ents (first revision)


26/96

- 23 -

MED 14 CRANES, LIFTING CHAINS AND ITS RELATED EQUIPMENT SECTIONA LCOMMITTEE

SCOPE - a) Stand ard ization of c ranes, winc hes, lifting c ha ins, sheaves suspension gea rs, hoo ks,swivel and shackles.

b) Co- ordination of work with ISO/ TC 111, Round steel link cha ins, lifting hook s and ac c essoriesand ISO/ TC 96 Crane s, lifting a pp lianc es and related eq uipm ent.

STANDARDS PUBLISHED

SLNO IS.NO./ DOC.NO. TITLE REAFFIRM / PRINTED

NO.OAMD

1 *IS 807:2006 Code of practice for design, manufacture, erection andtesting (structural portion) of cranes and hoists (Secondrevision)

APR 06 1

2 IS 2429(PT1):1987

Round steel short link chains (electric butt welded),Grade L(3), Part 1 Non-calibrated load chains for liftingpurposes (third revision)

FEB 08

3 IS 2758:1969 Mild steel point hooks for use with wire rope thimbles FEB 08

4 ** IS 2760:1980 Steel chain slings (first revision) MAR 06 2

5 IS 3109(PT1):1982

Short link chain, Grade M (4), Part 1 Non-calibratedload chain for lifting purposes (second revision)

FEB 08 1

6 IS 3177:1999 Code of practice for electric overhead travelling cranesand gantry cranes other than steel work cranes (secondrevision)

MAR 06 2

7 IS 3822:2002 Eye hooks for use with chains - Specification (secondrevision)

FEB 08 1

8 IS 3832:2005 Hand operated chain pulley blocks (third revision) APR 05 1

9 IS 3938:1983 Electric wire rope hoists (second revision) FEB 0810 *IS 4137:1985 Code of practice for heavy duty electric overhead

travelling cranes including special service machines foruse in steel work (first revision)

MAR 06

11 IS 4164:1976 Lifting 'C' hooks with eye capacity upto 25 tonnes (firstrevision)

MAR 06

12 IS 4178:1967 Eyenuts with collars MAR 06

13 IS 4190:1984 Eyebolts with collars (first revision) MAR 06

14 IS 4531(PT1):1988

Swivels: Part 1 General requirements (first revision) JUL 03

15 **IS 4531(PT2):1988

Swivels: Part 2 Dimensions of bow piece (first revision) JUL 03

16 ** IS 4531(PT3):1988

Swivels: Part 3 Dimensions of eye (first revision) JUL 03

17 * IS 4573:1982 Power driven mobile cranes (first revision) MAR 06 1

18 ** IS 4594:1968 Code of practice for design of portal and semi portalwharf cranes (electrical)

MAR 06


27/96

- 24 -

19 IS 5604:1984 Hand operated universal gearless pulling and liftingmachines (first revision)

MAR 06

20 *IS 5616:1982 Short link chain for lifting purposes general conditionsof acceptance (first revision)

FEB 08

21 IS 5749:1970 Forged ram shorn hooks FEB 08 1

22 *IS 6132:2003

/ISO 2415:1987

Forged shackles for general lifting purposes - Dee

shackles and Bow shackles (merging IS 6132 Pt 1, Pt 2and Pt 3)

JUN 03

23 *IS 6215:1982 Shork link chain, Grade T(8) non-calibrated for liftingpurposes (first revision)

FEB 08

24 *IS 6216:1982 Short link chain, Grade T (8) calibrated for pulley block and other lifting appliances (first revision)

FEB 08

25 IS 6217:1982 Short link chain, Grade S (6) non-calibrated for liftingpurposes (first revision)

FEB 08

26 IS 6296:1983 Short link chain, Grade S (6) calibrated for pulleyblocks and other lifting appliances (first revision)

FEB 08

27 IS 6498:1971 Glossary of terms used in connection with pulley blocks MAR 0628 IS 6511:1997

/IS0 2374:1983Range of preferred safe working loads for cranes, liftingappliances and related excavators equipment

FEB 08

29 ** IS 6521(PT1):1972

Code of practice for design of tower cranes: Part 1Static and rail mounted

MAR 06

30 ** IS 6547:1972 Electric chain hoists MAR 06 1

31 IS 6549:1972 Glossary of terms used in connection with lifting tackle MAR 06

32 IS 7847:1975 General characteristics of lifting hooks MAR 06

33 IS 7865:1975 General requirements of 8 tonnes hooks for lifting ISOseries 1 freight containers of upto 30 tonnes capacity

MAR 06

34 IS 8324:1988 Code of practice for safe use and maintenance of non-calibrated round steel lifting chains and chain slings(first revision)

JUL 03 1

35 IS 8686(PT1):1995 /ISO 8686-1:1989

Cranes - Design principles for loads and loadcombinations - Part 1 General

MAR 06

36 IS 8686(PT5):1995 /ISO 8686-5:1992

Cranes - Design principles for loads and loadcombinations - Part 5 Overhead travelling and portalbridge cranes

MAR 06

37 IS 9373:1995 /ISO 9373:1989

Cranes and related equipment - Accurcy requirementfor measuring parameters during testing

MAR 06

38 IS 9507:1979 Specification for general purpose electric power drivenwinches for lifing and hauling

MAR 06

39 IS 10131:1992 Round steel link chain (electric butt welded) for bucket elevators (first revision)

FEB 08 1

40 IS 11340:1985 Ratchet lever hoists MAR 06


28/96

- 25 -

41 IS 13058:1991 /ISO 7592:1983

Calibrated round steel link lifting chains - Guidelinesfor proper use and maintenance

MAR 06

42 IS 13156:1991 Sheave pulley blocks for wire rope_- Specifications MAR 06

43 IS 13308:1992 Lifting appliances - Sheaves - Technical supplyconditions

FEB 08

44 IS 13367(PT1):1992

Safe use of cranes - Code of practice Part 1 General FEB 08

45 IS 13473(PT1):1992 /ISO 4306-1:1990

Cranes - Vocabulary Part 1 General FEB 08

46 *IS 13473(PT2):1992/ISO

4306-2:1985

Cranes - Vocabulary Part 2 Mobile cranes FEB 08

47 *IS 13473(PT3):1993/ISO 4306-3:2003

Cranes - Vocabulary, Part 3 Tower cranes FEB 08

48 IS 13558(PT1):1992 /ISO 7752-

1:1983

Cranes - Controls - Layout and characteristics: Part 1General principles

MAR 06

49 IS 13558(PT2):1995 /ISO 7752-2:1986

Cranes - Controls - Layout and Characteristics - Part 2Mobile Cranes

MAR 06

50 IS 13558(PT3):1995/ISO 7752-3:1993

Cranes - Control - Layout and characteristics - Part 3Tower cranes

MAR 06

51 IS 13558(PT4):1993/ISO 7752-4:1989

Cranes - Controls - Layout and characteristics: Part 4Jib cranes

FEB 08

52 IS 13558(PT5):1993 /ISO 7752-5:1985

Cranes - Controls - Layout and characteristics: Part 5Overhead travelling cranes and postal bridge cranes

FEB 08

53 IS 13559(PT1):1993 /ISO 9374-1:1989

Cranes - Information to be provided, Part 1 General FEB 08

54 IS 13559(PT4):1992 /ISO 9374-4:1989

Cranes - Information to be provided Part 4 Jib cranes FEB 08

55 IS 13572(PT1):1992 /ISO 9928-1:1990

Cranes - Crane driving manual: Part 1 General FEB 08

56 IS 13583(PT1):1993 /ISO 9926-1:1990

Cranes - Training of drivers: Part 1 General FEB 08

57 IS 13834(PT1):1994 /ISO 4301-1:1986

Cranes - Classification Part 1 General FEB 08

58 IS 13834(PT2):1993 /ISO 4301-2:1985

Cranes - Classification: Part 2 Mobile cranes FEB 08


29/96

- 26 -

59 IS 13834(PT3):1995 /ISO 4301-3:1993

Cranes - Classification Part 3 Tower Cranes MAR 06

60 IS 13834(PT4):1993/ISO 4301-4:1989

Cranes - Classification: Part 4 Jib cranes FEB 08

61 IS 13834(PT5):1993 /ISO 4301-5:1991

Cranes - Classification: Part 5 Overhead travelling andportal bridge cranes

FEB 08

62 IS 14467:1997 /ISO 4302:1981

Cranes - Wind load assessment FEB 08

63 IS 14468:1997 /ISO 4304:1987

Cranes other than mobile and floating cranes - Generalrequirements for stability

FEB 08

64 IS 14469:1997 /ISO 4305:1991

Mobile cranes - Determination of stability FEB 08

65 IS 14470:1997 /ISO 4310:1981

Cranes - Test code and procedures FEB 08

66 IS 14471:1997 /ISO 7363:1986

Cranes and lifting appliances - Technical characteristicsand acceptance documents

FEB 08

67 IS 14472(PT5):1997 /ISO 9374-5:1991

Cranes - Information to be provided Part 5 Overheadtraveling cranes and portal bridge cranes

FEB 08

68 IS 14473(PT1):1997/ISO 9927-1:1994

Cranes - Inspections Part 1 General FEB 08

69 IS 14474(PT1):1997 /ISO 11662-1:1995

Mobile cranes - Experimental determination of craneperformance art 1 Tipping loads and radii

FEB 08

70 IS 14475(PT1):1997 /ISO 12482-1:1995

Cranes - Condition monitoring Part 1 General FEB 08

71 IS 15191:2002 Forged steel components for use with grade T(8) chainand chain sling -Specification

FEB 08

72 IS 15419:2003 Code of practice for jib cranes NOV 03

73 IS 15560:2005

Point hooks with shank upto 160 tonnes - Specification(Merging of IS 3815, 6294 and 8610)

JAN 05 1

* INDIC ATES STANDARDS UNDER REVISION. ** INDIC ATES STANDARDS TO BE REVISED

/ INDICA TES DUAL NUMBERED STANDARDS. | INDICA TES EQUIVALENT STANDARDS

DRAFT STANDARD UNDER PRINTDOC:MED 14(0933) Short link c hain for lifting purpo ses Gene ral c ond itions of ac c ep tanc e

(second revision of IS 5616:1982)

DOC:MED 14(0934) Forge d shac kles for ge neral lifting purpo ses Dee shac kles and bo w shac kles(second revision of IS 6132)

DOC:MED 14(0935) Short link c hain for lifting purpo ses Grad e T(8), Non-c alib rated for c hain slings etc(second revision of IS 6215:1982)


30/96

- 27 -

DOC:MED 14(0936) Short link c ha in for lifting pu rpo ses Grad e T, (Typ es T, DAT and DT), fine tole ranc e hoist c ha in(second revision of IS 6216:1982)

DOC:MED 14(0937) Cranes Voc ab ula ry Part 2: Mo bile c rane s [first revision of IS 13473(Part 2):1992]

DOC:MED 14(0938) Cranes Voc ab ula ry Part 3: Tow er c rane s [first revision of IS 13473(Part 3):1993]

DRAFT STANDARD A PPROVED FOR WIDE CIRCULATION

DOC:MED 14(0916) Code of prac tice for heavy duty electric overhead traveling cranes includingspe c ial service m ac hines for use in steel wo rk (sec ond revision of IS 4137)

DOC:MED 14(0917) Powe r driving mo bile c ranes Cod e of prac tice (secon d revision of IS 4573)


31/96

- 28 -

MED 16 GAS CYLINDERS SECTIONAL COMMITTEE

Sc op e - a) Formulation of stand ards on ga s c ylinders for pe rmane nt, high pressure liquefiab le low pressureliquefiable a nd dissolved ga ses; fittings of ga s cylinde r, nam ely v alve fittings, pressure regulators;pipe lines c onve ying ga ses; identific ation co lours of gas c ylinders; ac etylene ge nerators; fillingratios and deve lope d pressures for different ga ses.

b) Co- ordina tion of wo rk with ISO/ TC 58 Ga s Cylind ers.c ) Co- ordination of work with ISO/ TC 185 Safety for protec tion aga inst exce ssive pressures

STANDA RDS PUBLISHEDSLNO

IS.NO./ DOC.NO. TITLE REAFFIRM/ PRINTED

NO.OFAMDT

1 IS 3196(PT 1):2006 Welded low carbon steel gas cylinder exceeding5 litre water capacity or low pressure liquefiablegases Part 1 Cylinders for liquefied petroleumgas (LPG)(fifth revision)

MAR 06 1

2 IS 3196(PT 2):2006 Welded low carbon steel cylinders exceeding 5litre water apacity for low pressure liquefiablegases Part 2 Cylinders for liquefiable non-toxic

gases other than LPG (fifth revision)

MAR 06

3 IS 3196(PT 3):1991 Welded low carbon steel gas cylinder exceeding5 litre water capacity or low pressure liquefiablegases Part 3 Methods of test (fourth revision)

MAR 06 3

4 IS 3196(Pt 4):2006 Welded low carbon steel cylinders exceeding 5litre water capacity for ow pressure liquefiablegases - Specification Part 4 Cylinders for toxicand crrosive gases (Amalgamation of IS 7680,7681 and 7682)

JUL 06 1

5 IS 3224:2002 Valve fittings for compressed gas cylindersexcluding liquefiedpetroleum gas (LPG)

cylinders (third revision)

NOV 07 1

6 IS 3710:1978 Filling ratios for low pressure liquefiable gas(first revision)

MAR 06 1

7 IS 3745:12006 Yoke type valve connections for small medicalgas cylinders (second revision)

APR 06

8 IS 3933:1966 Colour identification of gas cylinders and relatedequipment intended for medical use

MAR 06

9 ** IS 4152:1989 Carbon di-oxide cylinders for fire fightingpurposes on boardship (second revision)

JUL 06

10 IS 4379:1981 Identification of contents of industrial gascylinders (first revision)

NOV 07 2

11 **IS 4786:1968 Variable high pressure regulators for use withliquefied petroleum gas

MAR 06 2

12 IS 5844:1970 Recommendations for hydrostatic stretch testingof compressed gas cylinders

MAR 06

13 IS 5845:1993 Code of practice for inspection of low pressurewelded steel gas cylinders other than LPGcylinders in use (second revision)

NOV 07

14 **IS 5903:1970 Recommendations for safety devices for gascylinders

MAR 06


32/96

- 29 -

15 **IS 6044(PT1):2000

Code of practice for liquefied petroleum gasstorage installations: Part 1 Commercial andindustrial cylinder installations (first revision)

JUL 06

16 **IS 6044(PT2):2001

Code of practice for liquefied petroleum gasstorage installations: Part 2 Commercial,industrial and domestic bulk storage installations(first revision)

JUL 06

17 IS 7142:1995 Welded low carbon steel cylinders for lowpressure liquifiable gases not exceeding 5 litrewater capacity - Specificatiom (first revision)

MAR 06

18 IS 7202:1974 Inspection gauges for checking threads of gascylinder valves for use with breathing apparatus

NOV 07

19 IS 7241:1981 Glossary of terms used in gas cylindertechnology (first revision)

NOV 07

20 IS 7285(PT 1):2004 Refillable seamless steel gas cylinders -Specification: Part 1 Normalized steel cylinders(third revision)

JUN 04 1

21 IS 7285(PT 2):2004 Refillable seamless steel gas cylinders -

Specification: Part 2 Quenched and temperedsteel cylinder (third revision)

JUN 04 1

22 **IS 7302:1974 Valve fittings for gas cylinder valves for usewith breathing apparatus

MAR 06

23 IS 7312:1993 Welded and seamless steel dissolved acetylenegas cylinders - Specification (second revision)

NOV 07 3

24 IS 8198:2004 Steel cylinder for compressed gases(Atmospheric gases, hydrogen, high pressureliquefiable gases and dissolved acetylene gases) -Code of practice (amalgamation of IS 8198(Pt 1to 4)

AUG 04

25 IS 8198(PT 5):1984 Code of practice for steel cylinders forcompressed gases Part 5 Liquefied petroleum gas(LPG) (first revision)

MAR 06

26 IS 8198(PT 6):1988 Code of practice for steel cylinders forcompressed gases Part 6 Liquefied chlorine gas(first revision)

NOV 07

27 IS 8198(PT 7):1988 Code of practice for steel cylinders forcompressed gases Part 7 Ammonia gas (firstrevision)

NOV 07

28 IS 8198(PT 8):1993 Code of practice for steel cylinders forcompressed gases Part 8 Common organicrefrigerant gases (first revision)

NOV 07

29 IS 8198(PT 9):1988 Code of practice for steel cylinders forcompressed gases Part 9 Sulphur dioxide gas(first revision)

NOV 07

30 IS 8198(PT 10):1988 Code of practice for steel cylinders forcompressed gases Part 10 Methyl bromide gas(first revision)

NOV 07

31 IS 8198(PT 11):1988 Code of practice for steel cylinders for NOV 07


33/96

- 30 -

compressed gases Part 11 Methyl chloride gas(first revision)

32 IS 8198(PT 12):1982 Code of practice for steel cylinders forcompressed gases Part 12 Gases for medical use

MAR 06

33 **IS 8433:1984 Code of practice for visual inspection of dissolved acetylene gas cylinders (first revision)

MAR 06

34 **IS 8451:1984 Code of practice for visual inspection of highpressure gas cylinders (first revision)

MAR 06

35 IS 8452:1977 Glossary of terms used in acetylene generators NOV 0736 IS 8471:2003 Acetylene generators - Requirements

(Amalgamation of IS 8471(Part 1 to 5)DEC 03

37 IS 8737:1995 Valve fittings for use with liquefied petroleumgas (LPG) cylinders of more than 5 litre watercapacity - Specification (first revision)

MAR 062

38 IS 8775:1978 Filling pressure and corresponding developedpressure for permanent gases contained in gascylinders

NOV 07

39 IS 8776:1988 Valve fittings for use with liquefied petroleum

gas (LPG) cylinder up to and including 5 litrewater capacity (first revision)

NOV 07 1

40 IS 8866:1978 Filling ratios and corresponding developedpressure for high pressure liquefiable gasescontained in gas cylinder

NOV 07

41 IS 8867:1978 Saturated vapour pressure and test pressure forlow pressure liquefiable gases contained in gascylinders

NOV 07

42 IS 8868:1988 Periodical inspection interval of gas cylinders inuse (first revision)

NOV 07

43 IS 9121:2005 Inspection gauges for checking type 1 (size 2)

taper threads of gas cylinder valves, taper 1 in 16(first revision)

MAR 05

44 *IS 9122:1979 Inspection gauges for checking type 2 taperthreads of gas cylinder valves, taper 3 in 25

MAR 06

45 IS 9200:1988 Method of disposals of unserviceablecompressed gas cylinders (first revision)

NOV 07

46 IS 9639:1980 Code of practice for visual inspection of lowpressure welded steel gas cylinders duringmanufacture

MAR 06 1

47 IS 9687:1980 Inspection gauges for checking type 1 (size 1)taper threads of gas cylinder valves taper 1 in 16

MAR 06

48 IS 9798:1995 Low pressure regulators for use with liquefiedpetroleum gas (LPG) -Specification (firstrevision)

MAR 06 3

49 IS 11006:1984 Flash back arrestor (flame arrestor) MAR 06 150 IS 12300:1988 Valve fittings for refrigerant cylinders -

SpecificationNOV 07 4

51 IS 12586:1988 Brazed low carbon steel gas cylinders notexceeding 13 litre water capacity

NOV 07 3

52 IS 12936:1990 Code for basic requirements for delivery persons JUL 06 1


34/96

- 31 -

engaged in the delivery of LPG cylinders

53 IS 13258:1991 welded low carbon steel cylinders exceeding 5litre water capacity for low pressure liquefiablegas - Code of practice for inspection andreconditioning of used LPG cylinders

MAR 06

54 IS 13497:1992 Fusible plug for dissolved acetylene gas cylinder- Specification

SEP 04

55 IS 14899:2000 Liquefied petroleum gas (LPG) containers forautomotive use -Specification MAR 06 3

56 **IS 15100:2001 Multi function valve assembly for permanentlyfixed LPG containers for Automotive use

JUL 06 3

57 IS 15190 (Pt 1): 2002 Acetylene pipelines - Code of practice Part 1 Forpressures from 155kPa to 2550 kPa

NOV 07

58 IS 15190(Pt 2): 2002 Acetylene pipelines - Code of practice Part 2 Forpressures upto 155 kPa

NOV 07

59 IS 15490:2004 Cylinders for on-board storage of compressednatural gas as a fuel for automotive vehicles -Specification

JUN 04 1

60 IS 15637:2006 Welded stainless steel cylinders for liquefiedpetroleum gases (LPG) From 0.5 litre to 250 litrewater capacity

FEB 06 1

61 IS 15660:2006 Refillable transportable seamless aluminiumalloy gas cylinders

JUN 06

62 IS 15737:2006 /ISO 10463

Cylinder for permanent gases Inspection attime of filling

DEC 06

63 SP 9:1973 Technical data sheet for gases conveyed incylinders

1


DRAFT STANDA RDS UNDER PRINTDOC: MED 16(0868) Inspe c tion ga uge s for c hec king Typ e 2 tap er thread of ga s c ylinde r, valve s, tap er 3 in 25

(first revision of IS 9122:1979)

DOC: MED 16(0970) Am end me nt No.2 to IS 3196: Part 1: 2006 Welde d Low Ca rbo n Stee l Cylinde rs Exc ee ding 5 LitreWater Cap ac ity for Low Pressure Lique fiable Gases - Part 1 : Cy linde rs for Lique fied PetroleumGases (LPG) Specification

DRAFT STANDA RDS FINALIZED BUT NOT YET UNDER PRINTDOC: MED 16(0947) Periodic inspe c tion and testing of highpressure ga s cy linders Cod e of prac tice

(Revision of IS 8451)

DRAFT STANDARDS COMPLETED WIDE CIRCULATIO N

DOC MED 16(0944) Am end me nt No. 2 to IS 3224 : 2002 Valv e Fitting s for Comp ressed Ga s Cylinde rs Exc lud ingLique fied Petroleum Gas (LPG) Cy linders - Spe cific ation

DRAFT STANDA RDS TO BE REDRAFTED FOR WIDE CIRCULATIO NDOC: MED 16(0815) Meta l lined c om po site cy linders for c om pressed natural ga s (CNG) vehic le -

Spec ifica tion


35/96

- 32 -

MED 17 CHEMICAL ENGINEERING PLANTS AND RELATED EQUIPMENTSECTIONAL COMMITTEE

Sc op e - a) Formulation of stand ards for eq uipm ent inc luding_industrial valve s used in c hem ica l industry.

b) c o-o rdination of wo rk with ISO/ TC 67 Material , equip me nt and offshore structuresfor pe troleum and natural ga s industries, ISO/ TC 112 Vac uum tec hnolog y,ISO/ TC 116 Spa c e hea ting ap plia nc es an d ISO/ TC 153 Valv es,


SLNO IS.NO./ DOC.NO. TITLE REAFFIRM/ PRINTED

NO.OFAMDTS

1 IS 2379:1990 Colour code for identification of pipe lines(first revision)

MAR 061

2 IS 2843:1964 Recommendation on nominal capacities forprocess equipment

MAR 06

3 IS 2844:1964 Recommendation on nominal diameter forprocess equipment

MAR 06

4 IS 3030:1965 Recommendation for letter symbols, signsand abbreviations used in chemicalengineering

MAR 06

5 IS 3132:1965 Recommendations for shaft diameter forchemical equipment

JAN 08

6 IS 3133:1989 Manhole and inspection openings forchemical equipment General requirements(first revision)

MAR 05

7 IS 3232:1999 Recommendations on graphical symbols forprocess flow diagrams (first revision)

MAR 05

8 IS 3233:1965 Glossary of terms for safety and relief valvesand their parts

JAN 08

9 IS 3612:1994 Crushing and grinding equipment -Classification and methods for measuringcapacity (first revision)

MAR 05

10 IS 4049(PT 1):1988 Formed ends for tanks and pressure vesselsPart 1 Based on outside diameter basis(second revision)

JUNE 03 1

11 IS 4049(PT 2):1996 Formed ends for tanks and pressure vessels -Specification Part 2 Based on insidediameter basis (first revision)

AUG 06

12 IS 4092(PT 1):1992 Centrifuges of the basket and bowl andvibrating type for use in industrial andcommercial application Part 1 Generalrequirements (second revision)

JAN 08

13 IS 4110:1967 Glossary of terms used in high vacuumtechnology

JUNE 03

14 IS 4179:1967 Sizes of process vessels and leadingdimensions

JUNE 03

15 IS 4254:1994 Jaw crushers - General requirements (firstrevision)

JUNE 03 1


36/96

- 33 -

16 IS 4255:1967 Gyratory and cone crushers MAR 06

17 IS 4503:1967 Shell and tube type heat exchangers JAN 08 3

18 IS 4642:1968 Ball pebble and tube mills MAR 06

19 IS 4682(PT 1):1994 Code of practice for lining of vessels andequipment for chemical processes Part 1Rubber lining (first revision)

JUNE 03 1

20 IS 4682(PT 2):1969 Code of practice for lining of vessels andequipment for chemical processes Part 2Glass enamel lining

MAR 06 1

21 IS 4682(PT 3):1969 Code of practice for lining of vessels andequipment for chemical processes Part 3Lead lining

MAR 06

22 IS 4682(PT 4):1998 Code of practice for lining of vessels andequipment for chemical processes Part 4Plasticised PVC lining

JUNE 03

23 IS 4682(PT 5):1970 Code of practice for lining of vessels andequipment for chemical processes Part 5Epoxide resin lining

MAR 06

24 IS 4682(PT 6):1970 Code of practice for lining of vessels andequipment for chemical processes Part 6Phenolic resin lining

MAR 06

25 IS 4682(PT 7):1974 Code of practice for lining of vessels andequipment for chemical processes Part 7Corrosion and heat resistant metals

MAR 06

26 IS 4682(PT 8):1974 Code of practice for lining of vessels and

equipment for chemical processes Part 8Precious metal

MAR 06

27 IS 4682(PT 9):1974 Code of practice for lining of vessels andequipment for chemical processes Part 9Titanium

MAR 06

28 IS 4682(PT10):1974

Code of practice for lining of vessels andequipment for chemical processes Part 10Brick and tile

MAR 06

29 IS 4854(PT 1):1969 Glossary of terms for valves and their parts:Part 1 Screw down stop check and gatevalve and their parts

MAR 05

30 IS 4854(PT 2):1969 Glossary of terms for valves and their parts:Part 2 Plug valves and cocks and their parts MAR 05

31 IS 4854(PT 3):1974 Glossary of terms for valves and their parts:Part 3 Butterfly valves

MAR 05

32 IS 4864:1968 Shell flanges for vessels and equipment:General requirements

MAR 06

33 IS 4865:1968 Welded shell flanges for non-pressureservice

MAR 06


37/96

- 34 -

34 IS 4866:1968 Welded shell flanges for carbon steelpressure vessels and equipment

MAR 06

35 IS 4867:1968 Welded neck shell flanges for carbon steelpressure vessels and equipment

MAR 06

36 IS 4868:1968 Welded shell flanges for stainless steelpressure vessels and equipment

MAR 06

37 IS 4869:1968 Welded shell flanges with hub for stainless

steel pressure vessels and equipment

MAR 06

38 IS 4870:1968 Flat gaskets for shell flanges MAR 06

39 IS 5036:1969 Filter presses recessed plate type and plateand frame type

MAR 06

40 IS 5428(PT 1):1985 Gauge glasses:Part 1 Tubular glasses forlevel gauges (first revision)

MAR 06

41 IS 5428(PT 2):1985 Gauge glasses: Part 2 Protector glasses fortubular gauge glasses (first revision)

MAR 06

42 IS 5428(PT 3):1985 Gauge glasses:Part 3 Through vision andreflex glasses (first revision)

MAR 06

43 IS 5428(PT 4):1985 Gauge glasses:Part 4 Circular sight and lightglasses (first revision)

MAR 06

44 IS 5428(PT 5):1985 Part 5 Port gauge glasses as used in fittingsfor steam boilers (first revision)

MAR 06

45 IS 5675:1987 Rotary-disk vacuum filters (first revision) JAN 08

46 IS 6034:1989 Insulating oil conditioning plants -Specification (first revision)

MAR 05

47 IS 6076:1990 /ISO1609:1986

Vacuum technology - Flange dimensions(first revision)

MAR 06

48 IS 6088:1988 Oil-to-water heat exchangers fortransformers (first revision)

JUNE 03

49 IS 6157:1981 Valve inspection and test (first revision) JAN 08

50 IS 6202:1971 Flat glass oil level gauges for oil storagetanks

MAR 05

51 IS 6838:1973 Dimensions for `O' rings and grooves forvacuum flanges

MAR 05

52 IS 6849(PT 1):1999 /ISO 1607-1:1993

Positive-displacement vacuum pumps -Measurement of the performancecharacteristics Part 1 Measurement of thevolume rate of flow (pumping speed)

(second revision)

MAR 05

53 IS 6849(PT 2):1993 /ISO 1607-2:1989

Positive displacement vacuum pumps -Measurement of performance charactersticsPart 2 Measurement of ultimate pressure(first revision)

JAN 08

54 IS 6849(PT3):1976 Methods of measurement of the performancecharacteristics of positive-displacementvacuum pumps Part 3 Water vapour pumpingcapacity

JAN 08


38/96

- 35 -

55 IS 7366:1974 Edge type filters required for filtration of oilsof straight mineral type

MAR 06

56 IS 8243(PT 1):1999 /ISO 1608/1:1993

Vapour vacuum pumps - Measurement of performance characteristics:Part 1Measurement of volume rate of flow(pumping speed) (second revision)

MAR 05

57 IS 8243(PT 2):1993

/ISO 1608-2:1989

Vapour vacuum pumps - Methods of

measurement of performance characteristicsPart 2 Measurement of critical backingpressure (first revision)

JUNE 03

58 IS 8244:1976 Methods of calibration of vacuum gauges bydirect comparison with reference gauge

JAN 08

59 IS 8245:1976 Graphical symbols for vacuum technology JAN 08

60 IS 8262(PT1):1976|ISO 2861-2:1980

Quick release couplings for vacuum pipelines Part 1 Screwed type

JAN 08

61 IS 8262(PT2):1976|ISO 2861-1:1974

Quick release couplings for vacuum pipelines Part 2 Clamped type

JAN 08

62 IS 8276(PT1):1976 Methods for calibration of vacuum gauges:Part 1 Pressure reduction by continuousflow in the pressure range of 10-1 to 1-5 Pa

JAN 08

63 IS 8280:1976 Methods of calibration of ionization vacuumgauges

JAN 08

64 IS 8288:1976|ISO 3669:1986

Bakeable flanges JAN 08

65 IS 8576:1977 Purchaser's data sheet for general purpose

dryers

JUNE 03

66 IS 8577:1977 Purchaser's data sheet for rotary vacuumfilters

JUNE 03

67 IS 8578:1977 Purchaser's data sheet for pulverizers JUNE 03

68 IS 8579:1977 Purchaser's data sheet for crystallizers JUNE 03

69 IS 8580:1977 Supplier's data sheet for vibrating screens JUNE 03

70 IS 8581:1977 Supplier's data sheet for cooling towers forprocess industry

JUNE 03

71 IS 8582:1977 Supplier's data sheet for basket typecentrifuges

JUNE 03

72 IS 8658:1978 Purchaser's data sheet for vibrating screens MAR 06

73 IS 8659:1978 Purchaser's data sheet for basket typecentrifuges

MAR 06

74 IS 8660:1978 Purchaser's data sheet for vibrating vibratorsfor use with bin and hopper

MAR 06

75 IS 8667:1977 Purchaser's data sheet for cooling towers forprocess industry

JUNE 03


39/96

- 36 -

76 IS 9082:1979 Purchaser's data sheet for bursting discs andassemblies

MAR 06

77 IS 9083:1979 Purchaser's data sheet for rubber lined tanks MAR 06

78 IS 9084:1979 Recommendation for nominal capacities forfluid storage spherical tanks

MAR 06

79 IS 9151:1979 Glossary of terms for process equipment MAR 06

80 IS 9240:1979 Purchaser's data sheet for gas scrubber cooleror absorber

MAR 06

81 IS 9241:1979 Purchaser's data sheet for electrostaticprecipitators

MAR 06

82 IS 9254:1979 Supplier's data sheet for electrostaticpercipitators

MAR 06

83 IS 9260:1979 Supplier's data sheet for crystallizer MAR 06

84 IS 9289:1979 Purchaser's data sheet for agitators MAR 06

85 IS 9309:1979 Roller crusher MAR 06

86 IS 9446:1980 Graphical symbols for pipelines and

instrumentation diagrams

MAR 07

87 IS 9520:1980 Nominal sizes for valves MAR 06 3

88 IS 9522:1980 Code of practice for agitator equipment MAR 06

89 IS 9539:1980 Purchaser's data sheet for solid bowl scrolldischarge centrifuges

MAR 06

90 IS 9540:1980 Purchaser's data sheet for plate and framefilters

MAR 06

91 IS 9578:1980 Purchaser's data sheet for liquid/solidseparation centrifuges

MAR 06

92 IS 9579:1980 Supplier's data sheet for hammer mills MAR 06

93 IS 9580:1980 Purchaser's data sheet for hammer mills MAR 06

94 IS 9602:1980 Supplier's data sheet for agitators MAR 06

95 IS 9618:1980 Road tankers for liquefied petroleum gas MAR 06

96 IS 9625:1980 Locations of by-pass and drain connectionsfor valves

MAR 06 1

97 IS 9693:1980 Purchaser's data sheet for spray dryers MAR 06

98 IS 9705(PT 1):1980 Quick release couplings for vacuum pipelines Part 1: Screwed couplings type `B'

MAR 06

99 IS 9866:1981 Marking system for valves JAN 08

100 IS 9884:1981 Dimensions for ferrous valves - face to faceand end to end

JAN 08

101 IS 9890:1981 General purpose ball valves JAN 08

102 IS 10092:1982 Glossary of terms (and materials of construction) for rotary equipment

JUNE 03

103 IS 10120:1982 Supplier's data sheet for rotary dryers JUNE 03

104 IS 10123:1982 Data sheet for shell and tube type heat JUNE 03


40/96

- 37 -

exchangers

105 IS 10217:1982 Method of determination of crushabilityindex

MAR 06

106 IS 10218:1982 Method of determination of grindabilityindex

MAR 06

107 IS 10219:1982 Purchaser's data sheet for tube nestevaporation plants

JUNE 03

108 IS 10247:1982 Method of determination of impact index MAR 06109 IS 10409:1983 Purchaser's data sheet for rotary type dryer JUNE 03

110 IS 10444:1983 Hammer mills MAR 06

111 IS 10459:1983 General purpose plug valves JUNE 03

112 IS 10470:1983 Air cooled heat exchangers MAR 06 1

Documents

IS std list