Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
~Reliable Sales and Service Network~
Specifications
● Overseas Office
TokyoHeadquarter
TaipeiTainanManilaHo Chi Minh
Shanghai
ShenzhenHong Kong
Chicago
Los Angels
Detroit
HanoiBangkok
SingaporeJakarta
Kuala Lumpur
Gurgaon
Electric Servo DriveInjection Molding Machine
(Hiroshima Plant)
URL http://www.jsw.co.jp/
Division Gate City Ohsaki-West Tower, 11-1, Osaki 1-chome, Shinagawa-ku,Head Quarter: Tokyo 141-0032, Japan Phone: +81-3-5745-2081 URL http://www.jsw.co.jp/inj_f/inj_index.htm
JSW Plastics Machinery Inc.Head Office: 555 South Promenade Ave., Unit 104, Corona, California 92879 U.S.A. Phone: +1-951-898-0934Chicago Office: 540 Capital Drive, Suite 130, Lake Zurich, Illinois 60047 U.S.A. Phone: +1-847-550-0704Detroit Office: 24387 Halsted Road Unit B, Farmington Hills, Michigan 48335 U.S.A. Phone: +1-248-308-2822
Hanoi Head Office: Room103, Techno-Center Thang Long Industrial Park Dong Anh District, Hanoi, Vietnam Phone: +84-4-3951-6383Ho Chi Minh Office: Ground Floor, DC Tower, 111D Ly Chinh Thang, Ward 7, District 3, HCC, Vietnam Phone: +84-8-3626-1295
JSW Plastics Machinery Vietnam Ltd.
The Japan Steel Works (Singapore) Pte. Ltd. 17 Gul Lane 629413 Singapore Phone: +65-6861-4511
PT. JSW Plastics Machinery Indonesia
Gajah Building Unit K, Jl.Dr.Saharjo No.111 Tebet, Jakarta Selatan 12810 Indonesia Phone: +62-21-8370-2536
JSW Plastics Machinery (Philippines) Inc.
Unit 802 Alabang Business Tower, 1216 Acacia Avenue, Madrigal Business Park Alabang Muntinlupa City Metro Manila 1771 Philippines Phone: +63-2-478-2533
JSW Plastics Machinery (M) SDN. BHD.
D6-5-G,(Ground Floor), Block D6, Pusat Perdagangan Dana 1, Jalan Pju 1A/46, 47301, Petaling Jaya, Selangor Darul Ehsan, Malaysia Phone: +60-3-7842-6076
The Japan Steel Works (Thailand) Co., Ltd.
78/6 JST Building 4th Floor, Moo 7 King Kaew Road, Rachatewa, Bangplee, Samutprakarn 10540 Thailand Phone: +66-2-738-5272
JSW Plastics Machinery (H.K.) Co., Ltd. Room 907, Corporation Park, 11 On Lai Street, Shatin N.T., Hong Kong Phone: +852-2648-0720
JSW Injection Machine Maintenance(Shenzhen) Co., Ltd. 1F, YiBen Electronic & Business Industrial Park, No.1063 Chaguang Road, Xili Town, Nanshan District, Shenzhen City,Guangdong Province, 518055, People’s Repubulic of China Phone: +86-755-8602-0930
JSW Machinery Trading (Shanghai) Co., Ltd. 28A, Strength Plaza, No.600-4, Tianshan Road, Shanghai, 200051, People’s Republic of China Phone: +86-21-5206-7031
JSW Plastics Machinery (TAIWAN) Corp.Head Office: 1F., No.21, Da Hu 1st Road, Guieshan Shiang Taoyuan Country 33373 Taiwan, R.O.C. Phone: +886-3-396-2102Tainan Office: 15F.,-7, No.689-78, Xiaodong Road, Yongkang City, Tainan Country 71052 Taiwan, R.O.C. Phone: +886-6-311-4192
611, Time Tower, MG Rood, Sector 28, Gurgaon, haryana, 122001, India Phone: +91-124-469-4444
Japan Steel Works India Private Limited
30 30
J30ADS15U
20
1817
177{1800}161{1640}
11017
177{1800}161{1640}
15717
177{1800}161{1640}
7917
18601514
218{2220}198{2010}
3508914500
218{2220}198{2010}
50012714500
218{2220}198{2010}
2506414500
3.1
3.52×1.10×1.59
16
1211
276{2810}251{2560}
7010
276{2810}251{2560}
10110
276{2810}251{2560}
5010
30U20
2523
270{2750}245{2490}
11017
270{2750}245{2490}
15717
270{2750}245{2490}
7917
25
3938
172{1750}157{1600}
17228
172{1750}157{1600}
24528
172{1750}157{1600}
12328
22803028
223{2270}203{2070}
35013321500
223{2270}203{2070}
50019021500
223{2270}203{2070}
2509521500
3.9
3.52×1.10×1.59
Performance Table
Item
Model
Stan
dard
Inje
ctio
n U
nit
Uni
t
Screw DiameterScrew StrokeTheoretical Injection CapacityInjection Capacity(GP-PS)
Nozzle Touch ForceNozzle Stroke from PlatenType of NozzleBarrel Temperature ControlHeater WattageMechanismClamping ForceDaylight Opening(Max.)Opening Stroke(Max.)Mold HeightDistance Between Tie-bars(H×V)
Platen Size(H×V)
Locating Ring DiameterEjector PointEjector ForceEjector StrokeMachine WeightMachine Dimensions(L×W×H)
mm
mm
cm3
g
mm/s
cm3/s
kg/h
min-1
mm/s
cm3/s
kg/h
min-1
mm/s
cm3/s
kg/h
min-1
mm
kW
mm
mm
mm
mm
mm
mm
mm
t
m
Injection Pressure(Max.)Holding Pressure(Max.)Injection SpeedInjection RatePlasticizing Capacity(GP-PS)Screw SpeedInjection Pressure(Max.)Holding Pressure(Max.)Injection SpeedInjection RatePlasticizing Capacity(GP-PS)Screw SpeedInjection Pressure(Max.)Holding Pressure(Max.)Injection SpeedInjection RatePlasticizing Capacity(GP-PS)Screw Speed
MPa{kgf/cm2}
MPa{kgf/cm2}
MPa{kgf/cm2}
MPa{kgf/cm2}
MPa{kgf/cm2}
MPa{kgf/cm2}
kN{tf}
kN{tf}
kN{tf}
Equipment Dimensions and Mold Related Dimensions
3374(15U)・3495(30U)
1814(15U)・1935(30U)1560
548
360 398
374
116015
28
1621
(15
U)・
1643
(30
U)
1450
546 444
990 871077
758
34020 378 20
3519279
66192 585 799 1672 92
625 1954
531
387 570
3240
957
1101
1594
1247
(15
U)
1269
(30
U)
To H
oppe
r Mou
nt Le
vel
607
197
105
5075100125150175200
50 75
175
125
100 15
0
440
310
440
310 75
75
211Nozzle Stroke
Ejector Stroke 50
Max. Stroke230
Min. Mold Height 120Max. Mold Height 430
Max. ForwardPosition 50
M12 Depth 22
1
Ejector Rod φ20
6060
70 40
φ40φ40
157.5
100
35 35
100
145
90
90
35 35
40
130
40
2
50
φ50
φ1.
8
φ60
+0.
030
0
SR10
φ32
.4
2
50
φ50 φ4
φ60
+0.
030
0
SR10
φ32
.4
15U 15U30U 30U
40
100 40
2-M8Depth14
2-M8Depth15
19.6{2.0} Center Touch50
Open NozzleBarrel 3、Nozzle 2
Double Toggle300{30.6}
660230
120~430310×310440×440
603 points9.9{1.0}
502.3
3-φ25Through Holefor Ejector Rod
52-M12 Depth 26Mold Mounting Tap
1385
To S
tatio
nary
Pla
ten
Top
Hig
h Sp
eed(
Opt
ion)
Ext. H
olding
Pres
sure(
Optio
n)
Top of Stationary Platen
4-M16 Depth 34Take-out RobotMounting Tap
Top of Hopper Frange
Max. Forward Position
2×4-22Drill(Hole for Leveling Pads)
Water Inlet Rc3/8(Non-operation Side)Water Outlet Rc3/8(Non-operation Side)
Max. Forward Position
Movable Platen
Remarks:1.Maximum injection pressure and maximum holding pressure may be restricted due to molding condition.2.The theoretical injection capacity is(cross sectional area of barrel)×(stroke of screw).3.The injection capacity is applicable for GP-PS and variable according to the grade of resin, molding conditions and mold.4.The plasticizing rate is applicable for GP-PS.5.PC, HPVC, other engineering plastic, etc., low temperature setting and high speed molding may require a high torque depending on the grade or molding conditions. Please contact us if you plan.Note:1.Due to continual improvements, specifications are subject to change without notice.2.Actual figures of the specification will vary depending on final machine configuration. Please contact us if you require more specific data.3.Performance specifications are based on theoretical data.4.High speed injection and Ext. holding pressure injection are optional.5.1MPa=10.2 kgf/cm2,1kN=0.102tf
Electric Servo DriveInjection Molding Machine
Cla
mpi
ng U
nit
Gene
ral
50 50
J50ADS60U
32
8073
165{1680}150{1530}
28174
165{1680}150{1530}
40274
165{1680}150{1530}
20174
281006256
215{2190}195{1980}
35021646400
215{2190}195{1980}
50030846400
215{2190}195{1980}
25015446400
Barrel 4、Nozzle 2
5.5
2.83.92×1.10×1.59
25
4945
270{2750}245{2490}
17234
270{2750}245{2490}
24534
270{2750}245{2490}
12334
15U20
1817
177{1800}161{1640}
11017
177{1800}161{1640}
15717
177{1800}161{1640}
7917
18601514
218{2220}198{2010}
3508914500
218{2220}198{2010}
50012714500
218{2220}198{2010}
2506414500
3.1
3.81×1.10×1.59
16
1211
276{2810}251{2560}
7010
276{2810}251{2560}
10110
276{2810}251{2560}
5010
30U20
2523
270{2750}245{2490}
11017
270{2750}245{2490}
15717
270{2750}245{2490}
7917
25
3938
172{1750}157{1600}
17228
172{1750}157{1600}
24528
172{1750}157{1600}
12328
22803028
223{2270}203{2070}
35013321500
223{2270}203{2070}
50019021500
223{2270}203{2070}
2509521500
19.6{2.0} Center Touch50
Open Nozzle
3.9
Double Toggle500{51.0}
740270
150~470360×360500×500
1005 points
20.0{2.0}70
3.81×1.10×1.59
758
548
398
546 444
990 851075
φ40
170
50 50
35 35
115
40
130 40
2
50 15
2
50 15
2
50 15
φ80
φ1.
8
φ10
0+
0.03
5
0
SR10
φ32
.4
φ80 φ4
φ10
0+
0.03
5
0
SR10
φ47
φ80 φ4
φ10
0+
0.03
5
0
SR10
φ32
.4
Barrel 3、Nozzle 2
2.7
3646(15U)・3767(30U)・3921(60U)
529
387 5701844(15U)・1965(30U)・2119(60U)1802
374(
15U
/30U
)51
0(60
U)
116015
48
1594
1621
(15
U)・
1643
(30
U)
1774
(60
U)
1450
3811
480
62092 805 1722 92
110(60U)3331
662 665 2004
957
1099
1247
(15
U)
1269
(30
U)
1264
(60
U)
To S
tatio
nary
Pla
ten
Top
607
197 14
15
105
φ40φ40
157.5
100
35 35
100
145
90
90
35 35
40130 40
15U
60U
15U 30U 30U
60U
40
100 40
2-M8Depth14
2-M8Depth15
2-M8Depth15
5075100125150175200
50 75
200
125
100 15
017
5
500
360 10
010
0
241Ejector Stroke 70
M16 Depth 27
1
Ejector Rod φ25
7575
75 50
500
360
100100
Performance Table
Electric Servo DriveInjection Molding Machine
Ext. H
olding
Pres
sure(
Optio
n)
Equipment Dimensions and Mold Related Dimensions
To H
oppe
r Mou
nt Le
vel
Water Inlet Rc3/8(Non-operation Side)Water Outlet Rc3/8(Non-operation Side)
2×4-22Drill(Hole for Leveling Pads)
Max. Forward Position Max. Forward Position
Max. Forward Position
Nozzle Stroke
Max. Stroke270
Min. Mold Height 150Max. Mold Height 470
Max. Forward Position 50
5-φ30.5Through Hole
for Ejector Rod
60-M16 Depth 34Mold Mounting Tap
4-M16 Depth 34Take-out Robot
Mounting Tap
Top of Stationary Platen
Movable Platen
Top of Hopper Frange
Item
Model
Stan
dard
Inje
ctio
n U
nit
Uni
t
Screw DiameterScrew StrokeTheoretical Injection CapacityInjection Capacity(GP-PS)
Nozzle Touch ForceNozzle Stroke from PlatenType of NozzleBarrel Temperature ControlHeater WattageMechanismClamping ForceDaylight Opening(Max.)Opening Stroke(Max.)Mold HeightDistance Between Tie-bars(H×V)
Platen Size(H×V)
Locating Ring DiameterEjector PointEjector ForceEjector StrokeMachine WeightMachine Dimensions(L×W×H)
mm
mm
cm3
g
mm/s
cm3/s
kg/h
min-1
mm/s
cm3/s
kg/h
min-1
mm/s
cm3/s
kg/h
min-1
mm
kW
mm
mm
mm
mm
mm
mm
mm
t
m
Injection Pressure(Max.)Holding Pressure(Max.)Injection SpeedInjection RatePlasticizing Capacity(GP-PS)Screw SpeedInjection Pressure(Max.)Holding Pressure(Max.)Injection SpeedInjection RatePlasticizing Capacity(GP-PS)Screw SpeedInjection Pressure(Max.)Holding Pressure(Max.)Injection SpeedInjection RatePlasticizing Capacity(GP-PS)Screw Speed
MPa{kgf/cm2}
MPa{kgf/cm2}
MPa{kgf/cm2}
MPa{kgf/cm2}
MPa{kgf/cm2}
MPa{kgf/cm2}
kN{tf}
kN{tf}
kN{tf}
Hig
h Sp
eed(
Opt
ion)
Remarks:1.Maximum injection pressure and maximum holding pressure may be restricted due to molding condition.2.The theoretical injection capacity is(cross sectional area of barrel)×(stroke of screw).3.The injection capacity is applicable for GP-PS and variable according to the grade of resin, molding conditions and mold.4.The plasticizing rate is applicable for GP-PS.5.PC, HPVC, other engineering plastic, etc., low temperature setting and high speed molding may require a high torque depending on the grade or molding conditions. Please contact us if you plan.Note:1.Due to continual improvements, specifications are subject to change without notice.2.Actual figures of the specification will vary depending on final machine configuration. Please contact us if you require more specific data.3.Performance specifications are based on theoretical data.4.High speed injection and Ext. holding pressure injection are optional.5.1MPa=10.2 kgf/cm2,1kN=0.102tf
Cla
mpi
ng U
nit
Gene
ral
80 80
J80ADS60U
32
8073
165{1680}150{1530}
28174
165{1680}150{1530}
40274
165{1680}150{1530}
20174
50Open Nozzle
Double Toggle800{81.6}
830320
150~510410×410580×580
1005 points
32.4{3.3}80
281006256
215{2190}195{1980}
35021646400
215{2190}195{1980}
50030846400
215{2190}195{1980}
25015446400
5.5
3.44.23×1.15×1.59
25
4945
270{2750}245{2490}
17234
270{2750}245{2490}
24534
270{2750}245{2490}
12334
110U32
9788
270{2750}245{2490}
35028174400------
270{2750}245{2490}
25020174400
24.5{2.5} Center Touch
3.9
35120115105
225{2290}205{2090}
33792
--
--
225{2290}205{2090}
24192
9.2
4.65×1.23×1.59
28
6256
300{3060}275{2800}
21646
--
--
300{3060}275{2800}
15446
25 100
4945
320{3260}290{2960}
17234
--
--
320{3260}290{2960}
12334
40
151137
172{1750}157{1600}
440123
--
--
172{1750}157{1600}
314123
30U20
2523
270{2750}245{2490}
11017
270{2750}245{2490}
15717
270{2750}245{2490}
7917
25
3938
172{1750}157{1600}
17228
172{1750}157{1600}
24528
172{1750}157{1600}
12328
22803028
223{2270}203{2070}
35013321500
223{2270}203{2070}
50019021500
223{2270}203{2070}
2509521500
Barrel 3、Nozzle 23.9
3.3
4.23×1.15×1.59
19.6{2.0} Center Touch
Barrel 4、Nozzle 26.7
4.45×1.23×1.59
3975(30U)・4129(60U)・4450(110 U/φ25・28)・4645(110 U/φ32・35・40)2002(30U)・2156(60U)2477(110 U/φ25・28)2672(110 U/φ32・35・40)1973
813
370 443
374(
30U
)50
9(60
U)
591(
110U
)
117815
94
1661
(30
U)・
1791
(60
U)
1893
(11
0U)
1468
(30
U/6
0U)
1503
(11
0U)
566 486
1052 901142
603
4227433
82086 665 985 1968 90
725 2249
957(30U/60U)1134(110U)
576
387(30U/60U)478(110U)
570(30U/60U)656(110U)
3794
1146(30U/60U)1232(110U)
1287
(30
U)
1282
(60
U)
1302
(11
0U)
607
197
105
75125175225
250
75
250
175
125 22
5
580
410
100 100
580
410 10
010
0
278
1
100
100
65 50
φ64φ40
206
180
55 100
139
170
100
1153535
40170
60
110U/φ32・35・40110U/φ25・28
30U 60U/110U
40130 40
M12 Depth24
M8 Depth12
223(110U/φ25・28)418(110U/φ32・35・40)
φ40
170
100
3535
115
40130 40
φ40
1576
100
3535
100
40130 40
2
50 15
2
50 15
φ80 φ4
φ10
0+
0.03
5
0
SR10
φ47
φ80 φ4
φ10
0+
0.03
5
0
SR10
φ32
.4
1473
30U 60U
Performance Table Equipment Dimensions and Mold Related Dimensions
To S
tatio
nary
Plat
en To
p
To H
oppe
r Mou
nt Le
vel
Water Inlet Rc3/8(Non-operation Side)Water Outlet Rc3/8(Non-operation Side)
2×4-22Drill(Hole for Leveling Pads)
2-M8Depth15
2-M8Depth15
2-M8Depth15
Max. Forward Position Max. Forward Position
Top of Hopper Frange
Ejector Stroke 80
M16 Depth 27
Ejector Rod φ25 Nozzle Stroke
Max. Stroke320
Min. Mold Height 150Max. Mold Height 510
Max. Forward Position 50
5-φ30.5Through Hole
for Ejector Rod
60-M16 Depth 34Mold Mounting Tap
4-M16 Depth 34Take-out Robot
Mounting Tap
Top of Stationary PlatenMovable Platen
Item
Model
Stan
dard
Inje
ctio
n U
nit
Uni
t
Screw DiameterScrew StrokeTheoretical Injection CapacityInjection Capacity(GP-PS)
Nozzle Touch ForceNozzle Stroke from PlatenType of NozzleBarrel Temperature ControlHeater WattageMechanismClamping ForceDaylight Opening(Max.)Opening Stroke(Max.)Mold HeightDistance Between Tie-bars(H×V)
Platen Size(H×V)
Locating Ring DiameterEjector PointEjector ForceEjector StrokeMachine WeightMachine Dimensions(L×W×H)
mm
mm
cm3
g
mm/s
cm3/s
kg/h
min-1
mm/s
cm3/s
kg/h
min-1
mm/s
cm3/s
kg/h
min-1
mm
kW
mm
mm
mm
mm
mm
mm
mm
t
m
Injection Pressure(Max.)Holding Pressure(Max.)Injection SpeedInjection RatePlasticizing Capacity(GP-PS)Screw SpeedInjection Pressure(Max.)Holding Pressure(Max.)Injection SpeedInjection RatePlasticizing Capacity(GP-PS)Screw SpeedInjection Pressure(Max.)Holding Pressure(Max.)Injection SpeedInjection RatePlasticizing Capacity(GP-PS)Screw Speed
MPa{kgf/cm2}
MPa{kgf/cm2}
MPa{kgf/cm2}
MPa{kgf/cm2}
MPa{kgf/cm2}
MPa{kgf/cm2}
kN{tf}
kN{tf}
kN{tf}
Hig
h Sp
eed(
Opt
ion)
Ext. H
olding
Pres
sure(
Optio
n)
Remarks:1.Maximum injection pressure and maximum holding pressure may be restricted due to molding condition.2.The theoretical injection capacity is(cross sectional area of barrel)×(stroke of screw).3.The injection capacity is applicable for GP-PS and variable according to the grade of resin, molding conditions and mold.4.The plasticizing rate is applicable for GP-PS.5.PC, HPVC, other engineering plastic, etc., low temperature setting and high speed molding may require a high torque depending on the grade or molding conditions. Please contact us if you plan.Note:1.Due to continual improvements, specifications are subject to change without notice.2.Actual figures of the specification will vary depending on final machine configuration. Please contact us if you require more specific data.3.Performance specifications are based on theoretical data.4.High speed injection and Ext. holding pressure injection are optional.5.1MPa=10.2 kgf/cm2,1kN=0.102tf
Electric Servo DriveInjection Molding Machine
Cla
mpi
ng U
nit
Gene
ral
100 100
J100ADS60U 110U 180U
32
8073
165{1680}150{1530}
28174
165{1680}150{1530}
40274
165{1680}150{1530}
20174
281006256
215{2190}195{1980}
35021646400
215{2190}195{1980}
50030846400
215{2190}195{1980}
25015446400
19.6{2.0} Center Touch
5.5
4.04.54×1.16×1.67
25
4945
270{2750}245{2490}
17234
270{2750}245{2490}
24534
270{2750}245{2490}
12334
32
9788
270{2750}245{2490}
35028174400------
270{2750}245{2490}
25020174400
50Open Nozzle
Barrel 4、Nozzle 2
Double Toggle1000{102}
910360
150~550460×460630×630
1005 points
32.4{3.3}1004.5
35120115105
225{2290}205{2090}
33792
--
--
225{2290}205{2090}
24192
9.2
4.83×1.23×1.67
28
6256
300{3060}275{2800}
21646
--
--
300{3060}275{2800}
15446
25 100
4945
320{3260}290{2960}
17234
--
--
320{3260}290{2960}
12334
40
151137
172{1750}157{1600}
440123
--
--
172{1750}157{1600}
314123
35
135123
260{2650}236{2400}
33792
--
--
260{2650}236{2400}
19292
45
223203
157{1600}143{1450}
557166
--
--
157{1600}143{1450}
318166
40140176160
199{2020}181{1840}
350440127400------
199{2020}181{1840}
200251127400
10.2
4.6
4.95×1.23×1.67
4317(60U)・4638(110U/φ25・28)・4833(110U/φ32・35・40)・4948(180U)2178(60U)・2499(110U/φ25・28)
2694(110U/φ32・35・40)・2809(180U)2139
957(60U)1134(110U/180U)
573
387(60U)478(110U/180U)
570(60U)656(110U/180U)
830
620
390 440
509(
60U
)59
3(11
0U)
593(
180U
)
1223
1667
1837
(60
U)・
1940
(11
0U/1
80U
)
1513
(60
U)
1548
(11
0U/1
80U
)
1327
(60
U)
1347
(11
0U/1
80U
)
586 513
10991159
60
4543528
751550 1175 2106 9292
870 2394 95(110U/φ25・28)290(110U/φ32・35・40)405(180U)
4015
190
600
1548
105
75125175225250
75 125 25
022
517
5
100 100
620
460
100
10062
0
460
300
1
100
100
65 60
φ64φ40
206(110U)218(180U)
180
55 100
139(110U)151(180U)
170
100
1153535
40170
60
2
50 15
φ80 φ4
φ10
0+
0.03
5
0
SR10
φ47
110U/φ32・35・40 / 180U110U/φ25・28
40130 40
M8 Depth12
M12 Depth24
24.5{2.5} Center Touch φ40
170
100
3535
115
40130 40
1143(60U)1229(110U/180U)
6.7
4.64×1.23×1.67
60U
Item
Model
Stan
dard
Inje
ctio
n U
nit
Uni
t
mm
mm
cm3
g
mm/s
cm3/s
kg/h
min-1
mm/s
cm3/s
kg/h
min-1
mm/s
cm3/s
kg/h
min-1
mm
kW
mm
mm
mm
mm
mm
mm
mm
t
m
MPa{kgf/cm2}
MPa{kgf/cm2}
MPa{kgf/cm2}
MPa{kgf/cm2}
MPa{kgf/cm2}
MPa{kgf/cm2}
kN{tf}
kN{tf}
kN{tf}
Hig
h Sp
eed(
Opt
ion)
Performance Table
Electric Servo DriveInjection Molding Machine
Equipment Dimensions and Mold Related Dimensions
To S
tatio
nary
Plat
en To
p
To H
oppe
r Mou
nt Le
vel
Water Inlet Rc3/8(Non-operation Side)Water Outlet Rc3/8(Non-operation Side)
2×4-22Drill(Hole for Leveling Pads)
Top of Hopper Frange
2-M8Depth15
2-M8Depth12
Max. Forward Position
Ejector Stroke 100
M16 Depth 27
Ejector Rod φ25Nozzle Stroke
Max. Stroke360
Min. Mold Height 150Max. Mold Height 550
Max. Forward Position 50
5-φ30.5Through Hole
for Ejector Rod
72-M16 Depth 34Mold Mounting Tap
Top of Stationary Platen
Movable Platen
4-M16 Depth 34Take-out Robot
Mounting Tap
Ext. H
olding
Pres
sure(
Optio
n)
Remarks:1.Maximum injection pressure and maximum holding pressure may be restricted due to molding condition.2.The theoretical injection capacity is(cross sectional area of barrel)×(stroke of screw).3.The injection capacity is applicable for GP-PS and variable according to the grade of resin, molding conditions and mold.4.The plasticizing rate is applicable for GP-PS.5.PC, HPVC, other engineering plastic, etc., low temperature setting and high speed molding may require a high torque depending on the grade or molding conditions. Please contact us if you plan.Note:1.Due to continual improvements, specifications are subject to change without notice.2.Actual figures of the specification will vary depending on final machine configuration. Please contact us if you require more specific data.3.Performance specifications are based on theoretical data.4.High speed injection and Ext. holding pressure injection are optional.5.1MPa=10.2 kgf/cm2,1kN=0.102tf
Screw DiameterScrew StrokeTheoretical Injection CapacityInjection Capacity(GP-PS)
Nozzle Touch ForceNozzle Stroke from PlatenType of NozzleBarrel Temperature ControlHeater WattageMechanismClamping ForceDaylight Opening(Max.)Opening Stroke(Max.)Mold HeightDistance Between Tie-bars(H×V)
Platen Size(H×V)
Locating Ring DiameterEjector PointEjector ForceEjector StrokeMachine WeightMachine Dimensions(L×W×H)
Injection Pressure(Max.)Holding Pressure(Max.)Injection SpeedInjection RatePlasticizing Capacity(GP-PS)Screw SpeedInjection Pressure(Max.)Holding Pressure(Max.)Injection SpeedInjection RatePlasticizing Capacity(GP-PS)Screw SpeedInjection Pressure(Max.)Holding Pressure(Max.)Injection SpeedInjection RatePlasticizing Capacity(GP-PS)Screw Speed
Cla
mpi
ng U
nit
Gene
ral
J130ADS60U 110U 180U
32
8073
165{1680}150{1530}
28174
165{1680}150{1530}
40274
165{1680}150{1530}
20174
281006256
215{2190}195{1980}
35021646400
215{2190}195{1980}
50030846400
215{2190}195{1980}
25015446400
19.6{2.0} Center Touch
5.5
5.34.76×1.34×1.73
25
4945
270{2750}245{2490}
17234
270{2750}245{2490}
24534
270{2750}245{2490}
12334
32
9788
270{2750}245{2490}
35028174400
270{2750}245{2490}
50040274400
270{2750}245{2490}
25020174400
50Open Nozzle
Barrel 4、Nozzle 2
Double Toggle1300{133}
950400
150~550530×510710×690
1005 points
32.4{3.3}1005.8
35120115105
225{2290}205{2090}
33792
225{2290}205{2090}
48192
225{2290}205{2090}
24192
9.2
4.95×1.34×1.73
28
6256
300{3060}275{2800}
21646
300{3060}275{2800}
30846
300{3060}275{2800}
15446
25 100
4945
320{3260}290{2960}
17234
320{3260}290{2960}
24534
320{3260}290{2960}
12334
40
151137
172{1750}157{1600}
440123
172{1750}157{1600}
628123
172{1750}157{1600}
314123
35
135123
260{2650}236{2400}
33792
260{2650}236{2400}
48192
260{2650}236{2400}
19292
45
223203
157{1600}143{1450}
557166
157{1600}143{1450}
795166
157{1600}143{1450}
318166
40140176160
199{2020}181{1840}
350440127400
199{2020}181{1840}
500628127400
199{2020}181{1840}
200251127400
10.2
5.9
5.07×1.34×1.73
24.5{2.5} Center Touch
6.7
4.76×1.34×1.73
φ64φ40
206(110U)218(180U)
180
55 100
138.5(110U)150.5(180U)
170
100
1153535
40170
60
2
50 15
φ80 φ4
φ10
0+
0.03
5
0
SR10
φ47
110U/φ32・35・40 / 180U110U/φ25・28
40130 40
M12 Depth24
M8 Depth12
60U
φ40
170
100
3535
115
40130 40
4435(60U)・4757(110U/φ25・28)・4950(110U/φ32・35・40)・5065(180U)
957(60U)・1134(110U/180U)
387(60U)478(110U/180U)
636
1206(60U)1292(110U/180U)
570(60U)656(110U/180U)2205(60U)・2527(110U/φ25・28)
2720(110U/φ32・35・40)・2835(180U)2230
960
457 503
510(
60U
)59
1(11
0U)
591(
180U
)
123517
34
1849
(60
U)・
1950
(11
0U/1
80U
)
1525
(60
U)
1560
(11
0U/1
80U
)
1339
(60
U)
1359
(11
0U/1
80U
)
1585
702 598
13001338
38
740
4757391
90 934 1020 2230 921076 773 2517
193(110U/φ32・35・40)308(180U)
4366
185
525
105
75125175
250325
75 125 30
025
017
5
100 100
710
530
100
10069
0
510
326
1
210
210
75 90
Equipment Dimensions and Mold Related Dimensions
To S
tatio
nary
Plat
en To
p
To H
oppe
r Mou
nt Le
vel
Water Inlet Rc3/8(Non-operation Side)Water Outlet Rc3/8(Non-operation Side)
2×4-22Drill(Hole for Leveling Pads)
Top of Hopper Frange
2-M8Depth15
2-M8Depth12
Max. Forward Position
Ejector Stroke 100
M16 Depth 27
Ejector Rod φ25Nozzle Stroke
Max. Stroke400
Min. Mold Height 150Max. Mold Height 550
Max. Forward Position 50
5-φ30.5Through Hole
for Ejector Rod
Movable Platen
68-M16 Depth 34Mold Mounting Tap
4-M20 Depth 43Take-out Robot
Mounting Tap
Top of Stationary Platen
Item
Model
Stan
dard
Inje
ctio
n U
nit
Uni
t
mm
mm
cm3
g
mm/s
cm3/s
kg/h
min-1
mm/s
cm3/s
kg/h
min-1
mm/s
cm3/s
kg/h
min-1
mm
kW
mm
mm
mm
mm
mm
mm
mm
t
m
MPa{kgf/cm2}
MPa{kgf/cm2}
MPa{kgf/cm2}
MPa{kgf/cm2}
MPa{kgf/cm2}
MPa{kgf/cm2}
kN{tf}
kN{tf}
kN{tf}
Hig
h Sp
eed(
Opt
ion)
Remarks:1.Maximum injection pressure and maximum holding pressure may be restricted due to molding condition.2.The theoretical injection capacity is(cross sectional area of barrel)×(stroke of screw).3.The injection capacity is applicable for GP-PS and variable according to the grade of resin, molding conditions and mold.4.The plasticizing rate is applicable for GP-PS.5.PC, HPVC, other engineering plastic, etc., low temperature setting and high speed molding may require a high torque depending on the grade or molding conditions. Please contact us if you plan.Note:1.Due to continual improvements, specifications are subject to change without notice.2.Actual figures of the specification will vary depending on final machine configuration. Please contact us if you require more specific data.3.Performance specifications are based on theoretical data.4.High speed injection and Ext. holding pressure injection are optional.5.1MPa=10.2 kgf/cm2,1kN=0.102tf
Ext. H
olding
Pres
sure(
Optio
n)
Performance Table
Screw DiameterScrew StrokeTheoretical Injection CapacityInjection Capacity(GP-PS)
Nozzle Touch ForceNozzle Stroke from PlatenType of NozzleBarrel Temperature ControlHeater WattageMechanismClamping ForceDaylight Opening(Max.)Opening Stroke(Max.)Mold HeightDistance Between Tie-bars(H×V)
Platen Size(H×V)
Locating Ring DiameterEjector PointEjector ForceEjector StrokeMachine WeightMachine Dimensions(L×W×H)
Injection Pressure(Max.)Holding Pressure(Max.)Injection SpeedInjection RatePlasticizing Capacity(GP-PS)Screw SpeedInjection Pressure(Max.)Holding Pressure(Max.)Injection SpeedInjection RatePlasticizing Capacity(GP-PS)Screw SpeedInjection Pressure(Max.)Holding Pressure(Max.)Injection SpeedInjection RatePlasticizing Capacity(GP-PS)Screw Speed
Electric Servo DriveInjection Molding Machine
Cla
mpi
ng U
nit
Gene
ral
J180ADS110U 180U 300U
32
9788
270{2750}245{2490}
35028174400
270{2750}245{2490}
50040274400
270{2750}245{2490}
25020174400
28
6256
300{3060}275{2800}
21646
300{3060}275{2800}
30846
300{3060}275{2800}
15446
25 100
4945
320{3260}290{2960}
17234
320{3260}290{2960}
24534
320{3260}290{2960}
12334
40
151137
172{1750}157{1600}
440123
172{1750}157{1600}
628123
172{1750}157{1600}
314123
35120115105
225{2290}205{2090}
33792
225{2290}205{2090}
48192
225{2290}205{2090}
24192
9.2
5.22×1.41×1.79
40
226206
250{2550}227{2310}
301130
250{2550}227{2310}
415130
250{2550}227{2310}
201130
51
368335
154{1570}140{1420}
490232
154{1570}140{1420}
674232
154{1570}140{1420}
327232
46180299273
189{1920}172{1750}
240399184400
189{1920}172{1750}
330548184400
189{1920}172{1750}
160266184400
Open Nozzle(Tip Type)
Barrel 4、Nozzle 113
120
7.75.70×1.41×1.79
35
135123
260{2650}236{2400}
33792
260{2650}236{2400}
48192
260{2650}236{2400}
19292
24.5{2.5} Center Touch50
Double Toggle1800{184}
1070470
200~600590×560810×780
9 points34.3{3.5}
130
45
223203
157{1600}143{1450}
557166
157{1600}143{1450}
795166
157{1600}143{1450}
318166
40140176160
199{2020}181{1840}
350440127400
199{2020}181{1840}
500628127400
199{2020}181{1840}
200251127400
10.2
5.33×1.41×1.79
5086(110U/φ25・28)・5217(110U/φ32・35・40)・5331(180U)・5703(300U)1134(110U/180U)1210(300U)
671
656(110U/180U)711(300U)
478(110U/180U)499(300U)
2631(110U/φ25・28)・2762(110U/φ32・35・40)2876(180U)・3248(300U)2455
1035497 538
593
1260
1794
1977
(11
0U/1
80U
)19
97(
300U
)
1585
(11
0U/1
80U
)16
13(
300U
)
1384
(11
0U/1
80U
)14
04(
300U
)
742 640
1382 311413
815
5086349
112 1040 1165 1215 1093 1121222 894 2621
131(110U/φ32・35・40)245(180U)617(300U)
4737
1327(100U/180U)1382(300U)
Open NozzleBarrel 4、Nozzle 2
100
7.5
165
515
105
75
125175
250325
75 125 32
525
017
5
100100200
590810
200
100
10078
056
0 5050
368
1
210
210
75 90
φ64φ40
206(110U)218(180U)
180185.2
55 100138.5(110U)150.5(180U)
170
100
1153535
40170
175
60
φ69
260
200
55 120
195
40136 60
2
50 15
φ80 φ4
φ10
0+
0.03
5
0
SR10
φ47
4
50 15
φ80 φ4
φ12
0+
0.03
5
0
SR10
φ70
300U
110U/φ32・35・40 / 180U110U/φ25・28
300U110U / 180U
40130 40
M12 Depth24
M12 Depth22
M8 Depth15
6.7
5.09×1.41×1.79
1660
Remarks:1.Maximum injection pressure and maximum holding pressure may be restricted due to molding condition.2.The theoretical injection capacity is(cross sectional area of barrel)×(stroke of screw).3.The injection capacity is applicable for GP-PS and variable according to the grade of resin, molding conditions and mold.4.The plasticizing rate is applicable for GP-PS.5.PC, HPVC, other engineering plastic, etc., low temperature setting and high speed molding may require a high torque depending on the grade or molding conditions. Please contact us if you plan.Note:1.Due to continual improvements, specifications are subject to change without notice.2.Actual figures of the specification will vary depending on final machine configuration. Please contact us if you require more specific data.3.Performance specifications are based on theoretical data.4.High speed injection and Ext. holding pressure injection are optional.5.1MPa=10.2 kgf/cm2,1kN=0.102tf
Equipment Dimensions and Mold Related Dimensions
To S
tatio
nary
Plat
en To
p
To H
oppe
r Mou
nt Le
vel
Water Inlet Rc3/8(Non-operation Side)Water Outlet Rc3/8(Non-operation Side)
2×5-22Drill(Hole for Leveling Pads)
Top of Hopper Frange
2-M8Depth12
M8 Depth12
Max. Forward Position Max. Forward Position
Band Heater(Max.)
Ejector Stroke 130
M16 Depth 27
Ejector Rod φ25 Nozzle Stroke
Max. Stroke470
Min. Mold Height 200Max. Mold Height 600
Max. Forward Position 50
9-φ33Through Hole
for Ejector Rod
Movable Platen
72-M16 Depth 34Mold Mounting Tap
Top of Stationary Platen
4-M20 Depth 43Take-out Robot
Mounting Tap
Item
Model
Stan
dard
Inje
ctio
n U
nit
Uni
t
mm
mm
cm3
g
mm/s
cm3/s
kg/h
min-1
mm/s
cm3/s
kg/h
min-1
mm/s
cm3/s
kg/h
min-1
mm
kW
mm
mm
mm
mm
mm
mm
mm
t
m
MPa{kgf/cm2}
MPa{kgf/cm2}
MPa{kgf/cm2}
MPa{kgf/cm2}
MPa{kgf/cm2}
MPa{kgf/cm2}
kN{tf}
kN{tf}
kN{tf}
Hig
h Sp
eed(
Opt
ion)
Ext. H
olding
Pres
sure(
Optio
n)
Performance Table
Screw DiameterScrew StrokeTheoretical Injection CapacityInjection Capacity(GP-PS)
Nozzle Touch ForceNozzle Stroke from PlatenType of NozzleBarrel Temperature ControlHeater WattageMechanismClamping ForceDaylight Opening(Max.)Opening Stroke(Max.)Mold HeightDistance Between Tie-bars(H×V)
Platen Size(H×V)
Locating Ring DiameterEjector PointEjector ForceEjector StrokeMachine WeightMachine Dimensions(L×W×H)
Injection Pressure(Max.)Holding Pressure(Max.)Injection SpeedInjection RatePlasticizing Capacity(GP-PS)Screw SpeedInjection Pressure(Max.)Holding Pressure(Max.)Injection SpeedInjection RatePlasticizing Capacity(GP-PS)Screw SpeedInjection Pressure(Max.)Holding Pressure(Max.)Injection SpeedInjection RatePlasticizing Capacity(GP-PS)Screw Speed
Electric Servo DriveInjection Molding Machine
Cla
mpi
ng U
nit
Gene
ral
Cla
mpi
ng u
nit
Inje
ctio
n un
it
Con
trolle
rM
onito
rO
ther
s
I tem Item Item Item
A-modeB-modeCompression: 1 to 6 Steps(Variable)
Note 1
Note 2Note 2
Note 3
Note 4Note 5
Note 6Note 7
Mold Open/Close : 4 Steps(Fixed)Ejection : 1 to 3 Steps(Variable)
Screw Rotation During Mold Open/CloseEject During Mold OpenInjection During Clamp Up
Utilities
Options List
Note. 1
Note. 2
Note. 3Note. 4Note. 5
Note. 5
Note. 6
Note. 7Note. 8
Note 1.Note 2.
Note 3.Note 4.Note 5.Note 6.
Note 7.
Nozzle of 300U is one piece type nozzle.Screw of injection units 15U.30U,60U,110U and 180U, LSP-2(Abrasion-resistant type)GP21 screw is equipped as standard. Screw of injection units 300U, Chrome-plated GP21 screw is equipped as standard. USB memory device as external memory is capable of storing of molding conditions.Screen Capture can be saved in PNG format, and measuring data can be saved in CSV formatThe printer and the printer cables are options.Maximum of 16 items and alarms can be selected out of the following monitor items.①Cycle time ②Injection time ③Metering time ④Max Injection pressure ⑤Cushion position⑥Holding pressure end position ⑦Holding pressure transfer pressure ⑧Screw back pressure⑫Metering torque ⑬Holding pressure transfer speed ⑭Mold close time ⑮Mold open time⑯Clamping force ⑰Shift stroke(HAVC) ⑱End speed(HAVC)Maintenance monitor based on molding condition
Note 1. Pneumatically actuated shut-off nozzle or hydraulically actuated shut-off nozzle can be selected.When selecting a hydraulically actuated nozzle, discussion with JSW is required.
Note 2. Contact us for the special screws.Note 3. Specification for reducing motor load during long-time holding pressure molding
under high holding pressureNote 4. Specification for reducing motor load during high plasticization torque moldingNote 5. When thermal insulation boards or magnet mold clampers are equipped, their
thicknesses should be considered for calculating the nozzle insertion amount.In addition, please note that the usable mold thickness range will change.
Note 6. English and Chinese are equipped as standard.Note 7. Regarding export specifications, discussion with JSW is required in some cases,
depending upon the export destinations.Note 8. Please designate colors, referring to color
Standard Equipment List
Electric Servo DriveInjection Molding Machine
Note: 1. Total Power capacity does not include external outlets. 2. We recommend that the rated interrupting current of the main power supply breaker is more than 25kA at AC400V/460V.
■ Cooling Water Capacity for Barrel Temperature Control
Note:The above figures do not include the required quantity of water for the mold temmperature.
15U30U60U
110U180U300U
0.2
0.3
0.4
J30ADS
J50ADS
J80ADS
J100ADS
J130ADS
J180ADS
15U30U15U30U60U30U60U
110U60U
110U180U60U
110U180U110U180U300U
5.25.85.66.29.36.29.3
13.89.5
14.016.79.5
14.016.712.814.919.2
5.66.56.06.9
10.16.9
10.1—
10.3——
10.315.618.317.420.926.6
■ Total Power Capacity
Machine ModelMachine Model Cooling Water Capacity for Barrel
Temperature Control(m3/h)
Total Power Capacity(kVA)
Standard Injection High Speed Injection5.66.56.06.9
10.16.9
10.113.810.314.016.710.314.016.712.814.919.2
Ext. Holding Pressure
Inje
ctio
n un
itC
lam
ping
uni
t
Oth
erElec
trical ins
trumenta
tionand
control
Open Nozzle(Tip type)/ Injection Units up to 300UKC Nozzle/15U-180UN2000F BarrelLSP-2 screw(Abrasion-resistant type)/15U-180UChrome-plated Screw/300UScrew Pull-backInjection Unit Swiveling Device(with Limit Switch)Screw Cold Start PreventionMolding/Purging/Pause Temperature SelectAuto Purging CircuitNozzle Retract Select
Injection/MeteringProgrammed ControlHolding Pressure Control SelectPull-back SelectIVS Contro(l Holding Pressure Transfer by Speed Detection)Barrel Temperature Control (PID)Synchronous Temperature Rise ControlHopper Flange Temperature ControlSoft Pack Servo ControlHAVC(High Accuracy Volume Cotrol)IWCS(Injection Weight and Cushion Stability)CcontrolReverse seal ControlAuto Grease LubricationBarrel Insulation CoverHigh-performance Platen SupportLow Vibration Mold Open/CloseWide PlatenFlat Press Platen Mechanism(Stationary Side/Movable Side)
Mold Open/Close and EjectionProgrammed ControlMold Protection FunctionElectric-driven Mold Thickness Adjusting DeviceAuto Clamp Force SettingEjector Plate Return Comfirmation Circuit
Toggle Type InjectionCompression Function
Parallel Motion
Clamping Safety Device(Mechanical/Electrical)Robot Mounting HolesGrease-free Toggle BushingAuto Grease LubricationServo Motor With Brake(Mold O/C・EJ)
Multi-touch Panel 15”TFT Color LCD ControllerMulti-language Select(English, Chinese, Japanese)300 Mold Conditions Storage(Internal Memory)Soft Start MoldingSelf Diagnostics FunctionI/O Customize FunctionMolding Operation Assist FunctionHelp FunctionPop-up DisplayManual Browsing FunctionStart-up Safety NoticeMolding Condition MEMOScreen Caputure Files Can Be Stored to USB Memory DeviceUSB Printer PortOverall Setting ScreenPre-heat TimerProduct Takeout Robot CircuitAttended/Unattended Operation SelectActual Value DisplayInjection/Metering Waveform MonitorInjection/Metering Waveform StorageOsilloscope Waveform MonitorEnergy Consumption and Regeneration MonitorBarrel Temperature MonitorInjection Pressure Monitor(IPM)Statistical GraphProduction MonitorCumlative Operating Hour DisplayCycle MonitorMolding Condition Upper/Lower Limit MonitorInspection and Maintenance GuideHeater System AlarmInjection Pressure Overshoot AlarmServo Fault AlarmGrease Lubrication AlarmFault Alarm BuzzAlarm HistorySet Value HistorySafty Compliance to JIMS K1001Cooling Water Closed Circuit for Feed ThroatAccessories(Maintenance Tools and Ejector Rods,etc.)
Long NozzleShut-off Nozzle(Pneumatic Type and Hydraulic Type)KC Nozzle(300U)M7 Screw(Plasticization type)HP Screw(High Dispersion Type)LSP-2 Screw(Abrasion-resistant Type) (300U)Chrome Plated Screw(15U-180U)Screws and Barrels for Optical ApplicationScrews and Barrels for Super Engineered Plastics ApplicationSpecial ScrewBarrel Blower Cooling UnitHopperHopper Slide DeviceHigh-speed injection spec.Extended Holding Presure TimeLong-time Plasticizing Spec.Mold Platen Heat Insulation Bord (5 or 10mm)Locating RingAir JetCore Pull Devices(Pneumatic Type and Hydraulic Type)Valve Gate Device(Pneumatic Type and Hydraulic Type)Coupler joint (Hydraulic, Pneumatic)Hydraulic Power Pack (40L or 60L) Internal UnitEjector Gate Cutting CircuitUnscrewing Motor CircuitProduct Drop Detector(Photoelectric)ChuteRejecting Product Detecting ChuteT-groove PlatenMold Setup DeviceMold Clamper Device(Pneumatic Type, Hydraulic Type, Magnet Type)Easy Mold Clamper(Easy clamp)Clamping Force Monitoring FunctionClamping Force Feedback Control
Multi-language Select(1 Language Additional)Centralized Control System NET100Mold Temperature Display(with Mold Temperature Upper/Lower Limit Alarm)Mold Temperature Control Device(with Mold Temperature Upper/Lower Limit Alarm)Mold Cooling Water Circuit(Installed on bed) Max. 60 °CCooling Water AlarmLeveling Pad for InstallationMachine Movement Prevention Device(Anchor Bolts)Rotary Warning Light(Single Color, 3 Colors)Export SpecificationDesignated Color(Bed and Cover)
Injection/Holding Pressure:1 to 6 Steps(Variable)Metering/Back Pressure:1 to 3 Steps(Variable)