Upload
hales
View
212
Download
0
Embed Size (px)
DESCRIPTION
www.hales.com.au Unbrako fasteners are the strongest off the shelf threaded fasteners you can buy. When purchasing Unbrako socket screws, you can be sure that they meet or exceed the strength levels of all current standards including ANSI, ISO and DIN to name a few. Why Unbrako? Reliability, high pressure, stresses and speeds in today’s machines and equipment demands stronger more reliable fasteners, as the rising cost of down time is intolerable., 57
Citation preview
Fasteners
Socket Head Cap Screws (Metric)Suitable for all high tensile applications.
Use alloy for tensiles up to 1300Mpa
Sizes M18, M42 and zinc coated are also available
Length M3 M4 M5 M6 M8 M10 M12 M14 M16 M20 M24 M27 M30 M36
5681012162025303540455055606570758090100110120130140150160170180190200220230
Unbrako fasteners are the strongest off the shelf threaded fasteners you can buy. When purchasing Unbrako socket screws, you can be sure that they meet or exceed
the strength levels of all current standards including ANSI, ISO and DIN to name a few.
Why Unbrako?Reliability, high pressure, stresses and speeds in today’s machines and
equipment demands stronger more reliable fasteners, as the rising cost of down time is intolerable.,
www.hales.com.au
Faste
ne
rs
57
Socket Head Cap Screws (Metric) continued
Length 1/8 3/16 1/4 5/16 3/8 1/2 5/8 3/4 1”
3/81/25/83/47/811 1/41 1/21 3/422 1/42 1/22 3/433 1/43 1/244 1/255 1/266 1/278910
BSW cap screws stockedSome sizes available in Threads: UNC, UNF, BSF Sizes: 7/16, 7/8, 1 1/4, 1 1/2 also available
Socket Head Cap Screws (Imperial)
Length M3 M4 M5 M6 M8 M10 M12 M14 M16 M20 M24 M27 M30 M36
240250260280300320330340350360380400420460480500520540560580
www.hales.com.au
Fast
en
ers
58
Length 6mm 8mm 10mm 12mm 16mm 20mm 24mm Shoulder
M5 M6 M8 M10 M12 M16 M20 Diameter
101216202530405060708090100110120130140150
Replaces costly special parts, shafts, pivots, pins and guides
Thread
Length 1/4 5/16 3/8 1/2 5/8 3/4 Shoulder Diameter“Thread BSW,UNC”
3/81/25/83/411 1/41 1/21 3/422 1/4 2 1/2 2 3/4 33 1/2 44 1/25
Replaces costly special parts, shafts, pivots,pins and guides
Socket Shoulder Screw (Imperial)
Socket Shoulder Screw (Metric)
www.hales.com.au
Faste
ne
rs
59
Socket Set Screw (Metric)
Socket Set Screw (Imperial)Knurled cup point
Length 1/8 3/16 1/4 5/16 3/8 1/2 5/8 3/4 1 BSW & UNC Thread
1/83/161/45/163/81/25/83/411 1/41 1/2 22 1/2 3
Knurled cup point
“dog, flat and cone point also available”
Length M1.6 M2 M2.5 M3 M4 M5 M6 M8 M10 M12 M16 M20 M24 Thread
345681012162025303540455060
www.hales.com.au
Fast
en
ers
60
Length M3 M4 M5 M6 M8 M10 M12 M16 M20 M24
68101216202530354045505560708090100120140160180
Controlled angle under head ensures maximumflushness and side wall contact, Non-slip hex
socket provides positive drive without damage tomaterial, also availabe in zinc coated
Socket Head Countersunk Screws (Imperial)Length 3/16 1/4 5/16 3/8 1/2 5/8 3/4
3/81/25/83/411 1/41 1/21 3/422 1/2 33 1/24
Socket Head Countersunk Screws (Metric)
www.hales.com.au
Faste
ne
rs
61
BSPT Pressure Plugs
Standard Dowel Pins (Imperial)Length 1/8 3/16 1/4 5/16 3/8 1/2 Dia
3/81/25/83/411 1/41 1/2 1 3/422 1/42 1/233 1/24
Length M3 M4 M5 M6 M8 M10 M12 M13 M16 M20 M25 Dia
101216182025303540506065708090100120
“Precision Ground and Hardened Dowel Pins, Standard for die work,also used as bearings, gauges and precision parts. Formed endsand controlled heat treatment prevent chipping. Close tolerances.”
Additonal sizesavailable upon
request.
Standard Dowel Pins (Metric)
Thread Size
1/8 1/43/81/25/83/411 1/41 1/2
Also available in NPTF Metric ISO
www.hales.com.au
Fast
en
ers
62
2025303540506065708090100120
“25mm also available upon request”Tapped Imperial dowel pins are available upon request
Ball CatchesPart Number RAM
D K L B
M6 3.5 14 1.2M8 5 16 1.8M10 6 19 2.2M12 8 22 2.8M16 10 24 3.4
K
B
k
L
Dd
Pin PlungersPart Number RBM
D K L B
M6 2.7 20 2.5M8 3.5 22 2.5M10 4 22 2.5M12 6 28 3.5M16 7.5 32 4.5
k
b
K
B
L
d
L
D
Tapped Dowel Pins (Metric)13mm
M8
www.hales.com.au
Faste
ne
rs
63
Hexagon Wrench (Allen Keys)
Allen Key Sets
lairepmIcirteMA/F MM A/F MM
Short Arm Short Arm Short Arm Long arm
1.5 1.5 1/16 1/162 2 5/64 5/64
2.5 2.5 3/32 3/323 3 7/64 7/644 4 1/8 1/8 5 5 9/64 9/646 6 5/32 5/328 8 3/16 3/1610 10 7/32 7/3212 12 1/4 1/4 14 14 5/16 5/1617 17 3/8 3/8 19 19 7/16 7/16
2/1 2/12261/961/942 8/5 8/572 4/3 4/323
7/8 7/8 1 1
Part Number Description
UMFKM Metric long arm 9pce (plastic moulded case)UMSM Metric short arm 10 pc (Plastic Wallet)
UMFKI Imperial long arm 13pc (Plastic moulded case)UMSI Imperal short arm 10pc (plastic wallet)
UMFBI Imperial Ballnose Long Series 13 pcUMFBM Metric Ballnose Long Series 9 pc
* Note straight & ballnose available
www.hales.com.au
Fast
en
ers
64