Upload
duongxuyen
View
281
Download
1
Embed Size (px)
Citation preview
Technical Data
InView Message Display SpecificationsCatalog Numbers 2706-P22R, 2706-P92C, 2706-P94C, 2706-P42R, 2706-P42C, 2706-P44R, 2706-P44C, 2706-P72CN1, 2706-P72CN2, 2706-P74CN1, 2706-P74CN2
InView Message Displays InView message displays are panel-mount and large-format displays for visually communicating information across the factory floor. Whether its process alarming, safety messages, inventory or process data, or thanking the team, InView displays can deliver the information to the right place when needed. Choose from eleven different models offering varying display lines, character sizes, message colors, font types, and messaging effects.
You can integrate the message displays into an existing industrial or commercial networks using communication modules and preferred Rockwell Automation controllers, third party controllers, or computer-based systems.
Topic Page
InView Message Displays 1
Environmental Specifications 2
Certifications 3
Technical Specifications 4
Product Selection 5
Communication Modules 6
Accessories 7
InView Messaging Software 8
Cables 8
Additional Resources 12
2 InView Message Display Specifications
Environmental Specifications
Table 1 lists the environmental specifications for the InView Message Displays.
Table 1 - Environmental Specifications - InView Message Displays
Attribute 2706-P22R, 2706-P92C, 2706-P94C, 2706-P42R, 2706-P42C, 2706-P44R, 2706-P44C, 2706-P72CN1, 2706-P72CN2, 2706-P74CN1, 2706-P74CN2
Temperature, operating 050 C (32122 F) 2706-P22R: 055 C (32131 F)
Temperature, storage -2570 C (-13158 F)
Relative humidity 5...95% noncondensing
Vibration 2706-P22R: 2 g
Shock, operating 2706-P22R: 15 g
Shock, nonoperating 2706-P22R: 30 g
Enclosure ratings2706-P22R
2706-P42R, 2706-P42C,2706-P44R, 2706-P44C
2706-P72CN1(1), 2706-P72CN22706-P74CN1(1), 2706-P74CN2
P92C, 2706-P94C:
(1) The cat. no. 2706-P72CN1 and 2706-P74CN1 displays have stainless steel enclosures. The NEMA Type 4X rating applies only to these enclosures.
NEMA Type 4 (indoor only)
NEMA Type 12
NEMA Type 4, 4X (indoor only)
NEMA Type 12, 13
Rockwell Automation Publication 2706-TD007A-EN-E - August 2010
InView Message Display Specifications 3
Certifications Tables 2 and 3 list the certifications for the InView Message Displays.
Table 2 - Environmental Specifications - InView Message Displays
Certification(1)
(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
2706-P22R, 2706-P92C
c-UL-us UL Listed Industrial Control Equipment, certified for US and Canada. UL listed for UL508-Industrial Control Products UL listed for UL1604-Hazardous Environments Class 1, Division 2, Groups A, B,
C, and D; Class II, Division 2, Groups F and G; and Class III, Division 2 Ul Listed for Canadian Safety Standards CSA 22.2 No. 14, No. 213 and C22.2
No. 142
CE European Union 89/336/EEC EMC Directive, compliant with: EN 61000-6-2; Industrial Immunity EN 50081-2; Industrial Emissions IEC 1131-2; Programmable Controllers - Equipment Class 1
C-Tick Australian Radiocommunications Act, compliant with: AS/NZS 2064 - Group 1, Class 1
Table 3 - Certifications - InView Message Displays, Cat. Nos. 2706-P94x, 2706-P44x, 2706-P72x, 2706-P74x
Certification(1)
(1) When marked. See the Product Certification link at http://www.ab.com for Declarations of Conformity, Certificates, and other certification details.
2706-P94C, 2706-P42R, 2706-P42C, 2706-P44R, 2706-P44C, 2706-P72CN1, 2706-P72CN2, 2706-P74CN1, 2706-P74CN2
ETL Approved
CE European Union 89/336/EEC EMC Directive, compliant with: EN 61000-6-2; Industrial Immunity EN 61000-6-4; Industrial Emissions EN 61131-2; Programmable Controllers
Rockwell Automation Publication 2706-TD007A-EN-E - August 2010
http://www.ab.comhttp://www.ab.com4 InView Message Display Specifications
Technical Specifications Table 4 lists the technical specifications for the InView Message Displays.
Table 4 - Technical Specifications - InView Message Displays
Message DisplayAttribute 2706-P22R
2706-P42R, 2706-P42C(1)
2706-P44R, 2706-P44C(2)2706-P72CN1, 2706-P72CN2(1)
2706-P74CN1, 2706-P74CN2(2)2706-P92C (1)
2706-P94C(2)
Viewing distance 7.6 m (25 ft) 60 m (200 ft) 100 m (350 ft) 137 m (450 ft)
Display Type Red LED matrix Red LED matrix orTricolor LED matrix
Tricolor LED matrix Tricolor LED matrix
Display area (WxH) 30 x 5 cm (12 x 2 in) 2706-P42R, 2706-P42C91.4 x 12.2 cm (36 x 4.8 in) (1)
2706-P44R, 2706-P44C183 x 12.2 cm (72 x 4.8 in) (2)
2706-P42R, 2706-P42C91.4 x 18.3 cm (36 x 7.2 in) (1)
2706-P44R, 2706-P44C152.4 x 18.3 cm (60 x 7.2 in) (2)
2706-P42R, 2706-P42C91.4 x 24.4 cm (36 x 9.6 in) (1)
2706-P44R, 2706-P44C183 x 24.4 cm (72 x 9.6 in) (2)
Pixel array 120 x 70 120 x 16 or 240 x 16 120 x 24 or 200 x 24 120 x 32 or 240 x 32
Pixel spacing (center-to-center) 2.54 mm (0.1 in) 7.62 mm (0.3 in) 7.62 mm (0.3 in) 7.62 mm (0.3 in)
Number of lines 2 1 or 2 14 15
Characters per line 20 2706-P42R, 2706-P42C 1 line: 12 (1) 2 line: 20 (1) 2706-P44R, 2706-P44C 1 line: 24 (2) 2 line: 40 (2)
2706-P72CN1, 2706-P72CN21 line: 12 (1) 2 line: 20 (1)
3 line: 20 (1)
4 line: 24 (1) 2706-P74CN1, 2706-P74CN2
1 line: 20 (2)3 line: 33 (2)3 line: 33 (2)4 line: 40 (2)
2706-P92C1line: 13 (1) 2 line: 13 (1) 3 line: 13 (1) 4 line: 20 (1) 5 line: 24 (1)
2706-P94C 1 line: 26 (2)2 line: 26 (2)3 line: 26 (2)4 line: 40 (2)5 line: 48 (2)
Character size 1.8 cm (0.7 in) 1 line: 12.2 cm (4.8 in)2 line: 5.3 cm (2.1 in)
1 line: 18.3 cm (7.2 in)2 line: 7.6 cm (3.0 in)3 line: 5.3 cm (2.1 in)4 line: 3.8 cm (1.5 in)
1 line: 24.4 cm (9.6 in)2 line: 11.4 cm (4.5 in)3 line: 7.6 cm (3.0 in)4 line: 5.3 cm (2.1 in)5 line: 3.8 cm (1.5 in)
Character set Standard and Extended ASCII Standard and extended ASCIIUser-defined graphic characters
Software Cat. no. 2706-PSW1 PC-based, InView Messaging software
Communication ports RS-232 serial port supports point-to-point communication from a single controller to a single InView display within a distance of 50 ft.RS-485 serial port supports multidrop communication from a single controller to multiple InView displays using an AIC+ module.
Input Voltage, DC 1830V DC, 0.5 A at 18V DC
Input Voltage, AC 100240V AC, 5060 Hz
Weight, approx. 0.85 kg (1.87 lb) 2706-P42R, 2706-P42C12.7 kg (28 lb)
2706-P44R, 2706-P44C22.7 kg (50 lb)
2706-P72CN1, 2706-P72CN227.2 kg (60 lb)
2706-P74CN1, 2706-P74CN236.3 kg (80 lb)
2706-P92C32 kg (70 lb)
2706-P94C 64 kg (140 lb)
Dimensions, approx., (HxWxD) 6 x 36 x 11 cm(2.41 x 14.40 x 4.38 in.)
2706-P42R, 2706-P42C14 x 103 x 20 cm(5.50 x 40.38 x 7.88 in.) (1)
2706-P44R, 2706-P44C14 x 194 x 20 cm(5.50 x 76.38 x 7.88 in.) (2)
2706-P72CN1, 2706-P72CN215 x 107 x 35 cm(6.0 x 42.25 x 13.75 in.) (1)
2706-P74CN1, 2706-P74CN215 x 168 x 35 cm(6.0 x 66.25 x 13.75 in.) (2)
2706-P92C40 x 105 x 13 cm(15.90 x 41.19 x 5.25 in.) (1)
2706-P94C40 x 196 x 13 cm(15.90 x 77.20 x 5.25 in.) (2)
Optional Communication modules
Communication type Remote I/O, DH-485, DH+, DeviceNet, ControlNet, Ethernet
Mounting method DIN rail Back-mounted on display Inside display Inside display
Power source External 24V DC From display From display From display
Series A or later C or later C or later C or later
(1) Display is available in short format 91.44 cm (3 ft).(2) Display is available in long format 182.88 m (6 ft enclosure).
Rockwell Automation Publication 2706-TD007A-EN-E - August 2010
InView Message Display Specifications 5
Product Selection Table 5 list the catalog numbers for the InView Message displays.
Table 5 - InView Message Display Catalog Numbers
Cat. No.Display LEDs Viewing
DistanceNo. of Lines
Characters Per Line NEMA Type PowerRed Tri-color Number Height: in. (cm)
2706-P22R 7.6 m(25 ft)2 20 0.7 (1.8) 4(1) DC
2706-P42R
60 m(200 ft)
1 or 2 12 or 20 4.8 or 2.1 (12.2 or 5.3) 12 AC
2706-P42C 1 or 2 12 or 20 4.8 or 2.1 (12.2 or 5.3) 12 AC
2706-P44R 1 or 2 24 or 40 4.8 or 2.1 (12.2 or 5.3) 12 AC
2706-P44C 1 or 2 24 or 40 4.8 or 2.1 (12.2 or 5.3) 12 AC
2706-P72CN2
100 m(350 ft)
14 1224 7.21.5 (18.33.8) 4 AC
2706-P72CN1 14 1224 7.21.5 (18.33.8) 4X(2) AC
2706-P74CN2 14 2040 7.21.5 (18.33.8) 4 AC
2706-P74CN1 14 2040 7.21.5 (18.33.8) 4X(2) AC
2706-P92C 137 m(450 ft)
15 1324 9.61.5 (24.43.8) 12, 13 AC
2706-P94C 15 2648 9.61.5 (24.43.8) 12, 13 AC
(1) NEMA Type rating applies when display is panel-mounted.
(2) Has stainless steel enclosure.
Rockwell Automation Publication 2706-TD007A-EN-E - August 2010
6 InView Message Display Specifications
Communication Modules InView message displays come standard with RS-232 and RS-485 communication ports. For applications requiring industrial or commercial networks, InView communication modules can be used to integrate your display into new and existing networks.
Table 6 - InView Display Communication Modules
Cat. No. Communication For Message Display Mounting Method
2706-PENETP
EtherNet/IP
2706-P22R, 24V DC DIN rail
2706-PENETM 2706-P4x Back of display
2706-PENETK 2706-P7x2706-P9x Inside display
2706-PENET1(1) (2)
(1) Rockwell Automation recommends using a third-party DIN-rail mounted Ethernet TCP/IP solution with the cat. no. 2706-P22R panel mount display. Lantronix and Digi both supply a DIN-rail Ethernet TCP/IP solution for connecting to a personal computer.
(2) The cat. no. 2706-P9x displays come standard with Ethernet TCP/IP, RS-232, and RS-485 communication.
Ethernet TCP/IP2706-P4x Back of display
2706-P7x Panel mounted
2706-PDNETP
DeviceNet
2706-P22R DIN rail(3)
(3) DIN-rail mounted modules operate on 24V DC power.
2706-PDNETM 2706-P4x Back of display
2706-PDNETK 2706-P7x2706-P9x Inside display
2706-PCNETP
ControlNet
2706-P22R DIN rail(3)
2706-PCNETM 2706-P4x Back of display
2706-PCNETK 2706-P7x2706-P9x Inside display
2706-PDH485P
DH-485
2706-P22R DIN rail(3)
2706-PDH485M 2706-P4x Back of display
2706-PDH485K 2706-P7x2706-P9x Inside display
2706-PDHPP
DH+
2706-P22R DIN rail(3)
2706-PDHPM 2706-P4x Back of display
2706-PDHPK 2706-P7x2706-P9x Inside display
2706-PRIOP
Remote I/O
2706-P22R DIN rail(3)
2706-PRIOM 2706-P4x Back of display
2706-PRIOK 2706-P7x2706-P9x Inside display
Rockwell Automation Publication 2706-TD007A-EN-E - August 2010
InView Message Display Specifications 7
Accessories The tables describe the adapter plate and interface modules used by the InView message displays.
Table 7 - Environmental Specifications - InView Display Communication Modules
Attribute 2706-PxxxxP, 2706-PxxxxM, 2706-PxxxxK
Temperature, operating -055 C (32131 F)
Temperature, storage -2570 C (-13158 F)
Relative humidity 5...95% noncondensing
Shock, operating 15 g
Shock, nonoperating 30 g
Vibration - channel mount 10 Hz
8 InView Message Display Specifications
InView Messaging Software
Develop messages on a computer by using the InView Messaging software, catalog number 2706-PSW1, an intuitive Microsoft Windows software package with WYSIWYG functionality. By using this simple configuration environment, you can quickly set up your communication network and create messages with varying attributes.
Message colors Font size and format Embedded process variables Message attributes
Cables The table summarizes cables used by the InView Message displays.
Table 11 - InView Messaging Software
Cat. No. Description
2706-PSW1 InView Messaging software with ActiveX controls
Table 12 - Cables
Cat. No. Description Length
2706-PCABLE1 InView message display program and download cable
1747-C10 DH-485 operating/programming cable 1.8 m (6 ft)
1747-C11 DH-485 operating/programming cable .3 m (1 ft)
1747-C20 DH-485 operating/programming cable 6 m (20 ft)
2711-NC13 RS-232 operating/programming cable, 9-pin D Shell to 9-pin D Shell
5 m (16.4 ft)
2711-NC14 RS-232 operating/programming cable, 9-pin D Shell to 9-pin D Shell
10 m (32.7 ft)
2711-NC21 RS-232 operating cable, 9-pin D Shell to 8-pin Mini DIN 5 m (16.4 ft)
2711-NC22 RS-232 operating cable, 9-pin D Shell to 8-pin Mini DIN 15 m (49 ft)
2706-NC13 RS-232 operating/programming cable, 9-pin D Shell to 9-pin D Shell
3 m (10 ft)
Rockwell Automation Publication 2706-TD007A-EN-E - August 2010
InView Message Display Specifications 9
Runtime Communication Cables
The tables provide a summary of connections between InView message displays and controllers or interface modules for runtime communication.
Table 13 - Runtime Communication Cables: InView Message Displays to SLC Controllers
ProtocolInView Display Port
or Comm Module Port
SLC-500, 5/01, 5/02CH1 RJ45 (DH-485)
SLC-5/03, 5/04, 5/05CH0 (9-pin RS-232)
(DH-485)
SLC 5/03CH1 (RJ45)(DH-485)
SLC 5/04CH1 (DH+)
SLC 5/05CH1 (ENET)
RS-232 serial point-to-point(any)
RS-232 portInView Display
RS-485 serial multidrop(any)
RS-485 port (terminal block)InView Display
Use AIC+ module(1761-NET-AIC)
Connect to port 3Daisy chain to other InView
displays
DH-485DH-485 (RJ45) portCommunication module2706-PDH485x
1747-C10 (2 m/6 ft)1747-C20 (6 m/20 ft)
Use AIC+ module(1761-NET-AIC)
Connect to port 3
1747-C10 (2 m/6 ft)1747-C20 (6 m/20 ft)
DeviceNetDeviceNet portCommunication module2706-PDNETx
To SLC 5/02 with 1747-SDN
and DeviceNet cable
Use 1747-SDN moduleand DeviceNet cable
Use 1747-SDN moduleand DeviceNet cable
Use 1747-SDN moduleand DeviceNet cable
Use 1747-SDN moduleand DeviceNet cable
ControlNetControlNet portCommunication module2706-PCNETx
InView Message Displays do not support SLC ControlNet configurations.
EtherNet/IP EtherNet/IP portCommunication module2706-PENETx
1585J-M type cable or
2711P- CBL-EX04 (4 m/14 ft) (1)
Remote I/ORemote I/O portCommunication module2706-PRIOx
SLC 5/02 onlyUse 1747-SN
with shielded twinaxial cable (1770-CD)
Use 1747-SN scannerwith shielded twinaxial cable (1770-CD)
DH+Remote I/O portCommunication module2706-PDHPx
Shielded twinaxial cable (1770-CD)
(1) A direct connection from an InView EtherNet/IP communication module to an SLC 5/05 requires an Ethernet switch or the 2711P-CBL-EX04 crossover cable.
Rockwell Automation Publication 2706-TD007A-EN-E - August 2010
10 InView Message Display Specifications
Table 14 - Runtime Communication Cables: InView Message Displays to PLC and Logix Controllers
ProtocolInView Display Port
or Comm Module Port
PLC-5, PLC-5C, PLC-5ECH0 (25-pin RS-232)
(DF1)
ControlLogixCH0 (9-pin RS-232)
(DF1)
CompactLogixCH0 (9-pin RS-232)
(DF1 or DH-485)
RS-232 serial point-to-point(any)
RS-232 portInView Display
2711-NC13 (5 m/16 ft)2711-NC14 (10 m/32 ft)
Use 9-pin to 25-pin adapter
2711-NC13 (5 m/16 ft)2711-NC14 (10 m/32 ft)
2711-NC13 (5 m/16 ft)2711-NC14 (10 m/32 ft)
RS-485 serial multidrop(any)
RS-485 port (terminal block)InView Display
Use AIC+ module(1761-NET-AIC)
Connect to port 3Daisy chain to other InView displays
Use AIC+ module(1761-NET-AIC)
Connect to port 3Daisy chain to other InView displays
Use AIC+ module(1761-NET-AIC)
Connect to port 3
DH-485DH-485 (RJ45) portCommunication module2706-PDH485x
Use AIC+ module(1761-NET-AIC)
Connect to port 3
DeviceNetDeviceNet portCommunication module2706-PDNETx
Use 1771-SDN moduleand DeviceNet cable
Use 1756-DNB Module with DeviceNet cable
Use 1761-NET-DNI moduleand DeviceNet cable
ControlNetControlNet portCommunication module2706-PCNETx
To PLC-5C withControlNet cable
Use 1756-CNB Module with ControlNet cable
EtherNet/IP EtherNet/IP portCommunication module2706-PENETx
To PLC-5/E with 1585J-M type cable or
2711P- CBL-EX04 (4 m/14 ft)(1)
Use 1756-ENET module with1585J-M type cable or
2711P- CBL-EX04 (4 m/14 ft)(1)Use 1761-NET-ENI module
and EtherNet cable
Remote I/ORemote I/O portCommunication module2706-PRIOx
Shielded twinaxial cable (1770-CD) Use 1756-DHRIO module
withshielded twinaxial cable (1770-CD)
DH+Remote I/O portCommunication module2706-PDHPx
Shielded twinaxial cable (1770-CD)Use 1756-DHRIO module
withshielded twinaxial cable (1770-CD)
(1) The AIC+ module is recommended for isolation purposes when the InView display and controller are not on same power supply.
Rockwell Automation Publication 2706-TD007A-EN-E - August 2010
InView Message Display Specifications 11
Table 15 - Runtime Communication Cables: InView Message Displays to MicroLogix Controllers
ProtocolInView Display Port
or Comm Module Port
MicroLogix 1000, 1100, 1200, 1400, 1500LSPCH0 (8-pin Mini DIN)
(DF1 or DH-485)
MicroLogix 1400, 1500LRPCH1/CH2 (9-pin RS-232)
(DF1 or DH-485)MicroLogix 1100, 1400 Ethernet
RS-232 serial point-to-point(any)
RS-232 portInView Display
1747-NC21 (5 m/16 ft)1747-NC22 (15 m/49 ft)Null modem required (1)
2711-NC13 (5 m/16 ft)2711-NC14 (10 m/32 ft)
RS-485 serial multidrop(any)
RS-485 port (terminal block)InView Display
Use AIC+ module(1761-NET-AIC)
Connect to port 3Daisy chain to other InView displays
Use AIC+ module(1761-NET-AIC)
Connect to port 3
DH-485DH-485 (RJ45) portCommunication module2706-PDH485x
Use AIC+ module(1761-NET-AIC)
Connect to port 3
Use AIC+ module(1761-NET-AIC)
Connect to port 3
DeviceNetDeviceNet portCommunication module2706-PDNETx
Use 1761-NET-DNI moduleand DeviceNet cable
Use 1761-NET-DNI moduleand DeviceNet cable
ControlNetControlNet portCommunication module2706-PCNETx
EtherNet/IP EtherNet/IP portCommunication module2706-PENETx
Use 1761-NET-ENI moduleand EtherNet cable
Use 1761-NET-ENI moduleand EtherNet cable
1585J-M Type Cable or 2711P- CBL-EX04 (4 m/14 ft) (2)
Remote I/ORemote I/O portCommunication module2706-PRIOx
DH+Remote I/O portCommunication module2706-PDHPx
(1) The AIC+ module is recommended for isolation purposes when the InView display and controller are not on same power supply.(2) A direct connection from an InView EtherNet/IP communication module to an SLC 5/05 requires an Ethernet switch or the 2711P-CBL-EX04 crossover cable.
Table 16 - Runtime Communications Cables: InView Message Displays to Interface Modules
ProtocolInView Display Port
or Comm Module Port1747-AIC
1761-NET-AIC
Port 1 (9-pin)
Port 2(8-pin Mini DIN)
Port 3(DH-485)
1761-NETDNI1771-NET-ENI
RS-485 serial multidrop(any)
RS-485 port (terminal block)InView Display
DH-485 DH-485 (RJ45) portCommunication module2706-PDH485x
1747-C10 (2 m/6ft)1747-C20 (6 m/20 ft)
1761-CBL-AS03 (3 m/10 ft)1761-CBL-AS09 (9 m/30 ft)
Rockwell Automation Publication 2706-TD007A-EN-E - August 2010
Additional Resources These documents contain additional information concerning related Rockwell Automation products.
You can view or download publications at http://www.rockwellautomation.com/literature. To order paper copies of technical documentation, contact your local Rockwell Automation distributor or sales representative.
Resource Description
2706-94x and 2706-97x Message Display Installation Instructions, publication 2706-IN006
Provides instructions on how to change the serial address and install the 2706-94x and 2706-97x InView message displays in NEMA enclosures.
2706-P92C and 2706-P94C Message Display Installation Instructions, publication 2706-IN016
Provides instructions on how to mount, connect, and set the switch settings on the 2706-P2Cx and 2706-P4Cx InView message displays.
InView Marquee Message Display Quick Start, publication 2706-QS001
Provides instructions on to configure and download messages to an InView displays and configure the display for Ethernet communication.
InView Marquee Message Display User Manual, publication 2706-UM016
Provides instructions in how to install, configure, and set up serial communication for the InView displays.
InView Communication Module Installation Instructions, publication 2706-IN015
Provides information on how to connect communication modules to the InView displays.
InView Communication Module User Manual, publication 2706-UM017
Provides information on how to wire, configure, and troubleshoot the InView communication modules.
Industrial Automation Wiring and Grounding Guidelines, publication 1770-4.1
Provides general guidelines for installing a Rockwell Automation industrial system.
Product Certifications website, http://www.ab.com
Provides declarations of conformity, certificates, and other certification details.
Allen-Bradley, InView, SLC, MicroLogix, ControlLogix, CompactLogix, Rockwell Software, and Rockwell Automation are
trademarks of Rockwell Automation, Inc.
Trademarks not belonging to Rockwell Automation are property of their respective companies.
Rockwell Otomasyon Ticaret A.., Kar Plaza Merkezi E Blok Kat:6 34752 erenky, stanbul, Tel: +90 (216) 5698400
Publication 2706-TD007A-EN-E - August 2010 Copyright 2010 Rockwell Automation, Inc. All rights reserved. Printed in the U.S.A.
http://literature.rockwellautomation.com/idc/groups/literature/documents/in/2706-in016_-en-p.pdfhttp://literature.rockwellautomation.com/idc/groups/literature/documents/in/2706-in016_-en-p.pdfhttp://literature.rockwellautomation.com/idc/groups/literature/documents/in/2706-in006_-mu-p.pdfhttp://literature.rockwellautomation.com/idc/groups/literature/documents/in/2706-in006_-mu-p.pdfhttp://literature.rockwellautomation.com/idc/groups/literature/documents/qs/2711c-qs001_-en-p.pdfhttp://literature.rockwellautomation.com/idc/groups/literature/documents/qs/2706-qs001_-en-p.pdfhttp://literature.rockwellautomation.com/idc/groups/literature/documents/in/2711c-in001_-en-p.pdfhttp://literature.rockwellautomation.com/idc/groups/literature/documents/um/2706-um016_-en-p.pdfhttp://literature.rockwellautomation.com/idc/groups/literature/documents/um/2711c-um001_-en-p.pdfhttp://literature.rockwellautomation.com/idc/groups/literature/documents/in/2706-in015_-en-p.pdfhttp://literature.rockwellautomation.com/idc/groups/literature/documents/um/2711c-um001_-en-p.pdfhttp://literature.rockwellautomation.com/idc/groups/literature/documents/in/2706-in015_-en-p.pdfhttp://literature.rockwellautomation.com/idc/groups/literature/documents/um/2706-um017_-en-p.pdfhttp://www.rockwellautomation.com/literaturehttp://literature.rockwellautomation.com/idc/groups/literature/documents/in/1770-in041_-en-p.pdfhttp://ab.com2706-TD007A-EN-E, InView Message Display SpecificationsInView Message DisplaysEnvironmental SpecificationsCertificationsTechnical SpecificationsProduct SelectionCommunication ModulesAccessoriesInView Messaging SoftwareCablesRuntime Communication CablesAdditional ResourcesBack Cover/ColorImageDict > /JPEG2000ColorACSImageDict > /JPEG2000ColorImageDict > /AntiAliasGrayImages false /CropGrayImages true /GrayImageMinResolution 300 /GrayImageMinResolutionPolicy /OK /DownsampleGrayImages true /GrayImageDownsampleType /Average /GrayImageResolution 300 /GrayImageDepth 8 /GrayImageMinDownsampleDepth 2 /GrayImageDownsampleThreshold 2.00000 /EncodeGrayImages true /GrayImageFilter /FlateEncode /AutoFilterGrayImages false /GrayImageAutoFilterStrategy /JPEG /GrayACSImageDict > /GrayImageDict > /JPEG2000GrayACSImageDict > /JPEG2000GrayImageDict > /AntiAliasMonoImages false /CropMonoImages true /MonoImageMinResolution 1200 /MonoImageMinResolutionPolicy /OK /DownsampleMonoImages true /MonoImageDownsampleType /Average /MonoImageResolution 1200 /MonoImageDepth -1 /MonoImageDownsampleThreshold 1.50000 /EncodeMonoImages true /MonoImageFilter /CCITTFaxEncode /MonoImageDict > /AllowPSXObjects false /CheckCompliance [ /None ] /PDFX1aCheck false /PDFX3Check false /PDFXCompliantPDFOnly false /PDFXNoTrimBoxError true /PDFXTrimBoxToMediaBoxOffset [ 0.00000 0.00000 0.00000 0.00000 ] /PDFXSetBleedBoxToMediaBox true /PDFXBleedBoxToTrimBoxOffset [ 0.00000 0.00000 0.00000 0.00000 ] /PDFXOutputIntentProfile (None) /PDFXOutputConditionIdentifier () /PDFXOutputCondition () /PDFXRegistryName () /PDFXTrapped /False /Description > /Namespace [ (Adobe) (Common) (1.0) ] /OtherNamespaces [ > /FormElements false /GenerateStructure true /IncludeBookmarks false /IncludeHyperlinks false /IncludeInteractive false /IncludeLayers false /IncludeProfiles true /MultimediaHandling /UseObjectSettings /Namespace [ (Adobe) (CreativeSuite) (2.0) ] /PDFXOutputIntentProfileSelector /NA /PreserveEditing true /UntaggedCMYKHandling /LeaveUntagged /UntaggedRGBHandling /LeaveUntagged /UseDocumentBleed false >> ]>> setdistillerparams> setpagedevice
Introduction_Catagory TypesThis tab summarizes Rockwell Automation Global Sales and Marketing preferred printing standards. It also provides guidance on whether a publication should be released as JIT (print on demand) or if it requires an RFQ for offset printing.Find your publication type in the first section below. Use the assigned Printing Category information to determine the standard print specifications for that document type. The Printing Categories are defined below the Publication Type section. Note there may be slightly different print specifications for the categories, depending on the region (EMEA or Americas).For more information on Global Sales and Marketing Printing Standards, see publication RA-CO004 in DocMan.Publication Type and Print CategoryPublication TypeOff Set Print Category Spec. (See table below)JIT Spec. (See table below)DescriptionOrder Min **Order Max **Life Cycle Usage / Release OptionADNA - PuttmanNAAdvertisement Reprint ColourNANAPresale / InternalAPA3D2Application Solution or Customer Success Story5100Presale / ExternalARNANAArticle/Editorial/BylineNANAPresale / Internal(press releases should not be checked into DocMan or printed)ATB3, B4D5Application techniques5100Presale / ExternalBRA2 Primary, A1NABrochures5100Presale / ExternalCAC2 Primary, C1NACatalogue150Presale / ExternalCGNANACatalogue Guide150Presale / ExternalCLNANACollection550Presale / ExternalCOA5, A6, A9D5Company Confidential InformationNANANA / ConfidentialCPE-onlyE-only, D5Competitive Information550NA / ConfidentialDCE-onlyE-onlyDiscount SchedulesNANAPresale / InternalDIA1, A3NADirect Mail5100Presale / InternalDMNANAProduct Demo550Presale / InternalDSB3D5Dimensions Sheet15Post / ExternalDUB3D5Document Update15Post / ExternalGRB2D6Getting Results15Post / ExternalINB3 Primary, B2D5, D6Installation instructions15Post / ExternalLMNANALaunch Materials550Presale / InternalPCB3D5Packaging ContentsPLE-only primary, B3E-onlyPrice List550Presale / InternalPMB2D6Programming Manual15Post / ExternalPPA3D1Profile (Single Product or Service). NOTE: Application Solutions are to be assigned the AP pub type.5100Presale / ExternalQRB2 primary, B3, B5D5, D6Quick Reference15Post / ExternalQSB2 primary, B3, B5D5, D6Quick Start15Post / ExternalRMB2D5, D6Reference Manual15Post / ExternalRNB3D5Release Notes15Post / ExternalSGB1 Primary, B4D5, D6Selection Guide Colour550Presale / ExternalSGB2D5, D6Selection Guide B/W550Presale / ExternalSPA1, A2, A3, A4NASales Promotion NOTE: Service profiles are to be assigned the PP pub type.5100Presale / InternalSRB2, B3D5, D6Specification Rating Sheet5100Presale / ExternalTDB2 Primary B3, B4, B5D5, D6Technical Data550Presale / ExternalTGB2, B3D6Troubleshooting Guide15Post / ExternalUMB2 Primary, B4D6User Manual B/W15Post / ExternalWDB3D5Wiring Diagrams / Dwgs15Post / InternalWPB3 Primary, B5D5White Paper550Presale / External** Minimum order quantities on all JIT items are based on the publication length. **Publication lengthMinimum Order Quantity77 or more pages1 (no shrink wrap required)33 to 76 pages253 to 32 pages501 or 2 pages100Pre-sale / MarketingAll paper in this category is White Brightness, 90% or better. Opacity 90% or betterCategoryColor OptionsAP, EMEA Paper RequirementsCanada, LA, US Paper RequirementsA14 color170 gsm 2pp100# gloss cover, 100# gloss textA24 color170 gsm , folded, 4pp100# gloss cover, 80# gloss textA34 colorCover 170 gsm with Body 120 gsm, > 4pp80# gloss cover, 80# gloss textA42 color170gsm Silk 120gsm Silk80# gloss cover, 80# gloss textA52 color170gsm Silk 120gsm Silk80# gloss cover, 80# matt sheet textA61 color170gsm Silk 120gsm Silk80# gloss cover, 80# matt sheet textA74 color cover2 color textSelection GuideCategory being deleted10 Point Cover C2S50# matte sheet textA84 color coverCategory being deleted50# matte sheet text, self cover2 color textSelection GuideA92 color100gsm bond50# matte sheet text, self coverSelection GuideGray shading indicates Obsolete Print CatagoriesPost Sale / Technical CommunicationCategoryColor OptionsAP, EMEA Paper RequirementsCanada, LA, US Paper RequirementsB14 color cover270gsm Gloss 100gsm bond10 Point Cover C2S2 color text50# matte sheet textB21 color160gsm Colortech & 100gsm Bond90# Cover50# matte sheet textB31 color100gsm bond50# matte sheet text, self coverB42 color160gsm Colortech & 100gsm Bond90# Cover50# matte sheet textB52 color100gsm bond50# matte sheet text, self coverCatalogsCategoryColor OptionsAP, EMEA Paper RequirementsCanada, LA, US Paper RequirementsC14 color cover270gsm Gloss 90gsm silk10 Point Cover C2S4 color text45# Coated SheetC24 color cover270gsm Gloss 80gsm silk10 Point Cover C2S2 color text32#-33# Coated SheetJIT / PODAll paper in this category is White Brightness, 82% or better. Opacity 88% or betterCategoryColor OptionsAP, EMEA Paper RequirementsCanada, LA, US Paper RequirementsD14 color170gsm white silk80# gloss cover, coated 2 sidesD24 color120gsm white silk80# gloss text, coated 2 sides, self coverD34 colorCover 170gsm with Body 120gsm80# gloss cover, 80# gloss text coated 2 sidesD41 color160gsm tab90# indexD51 color80gsm bond20# bond, self coverD61 colorCover 160gsm tab with Body 80gsm bond90# index, 20# bondD72 color160gsm tab90# indexD82 color80gsm bond20# bond, self coverD92 colorCover 160gsm tab with Body 80gsm bond90# index, 20# bondD10Combination: 4 color cover, with 2 color bodyCover 160gsm with Body 80gsm90# index, 20# bondGray shading indicates Obsolete Print CatagoriesJust In Time (JIT) or Off Set (OS)?Use these guidelines to determine if your publication should be JIT (just in time/print on demand) or if it would be more economical to print OS (offset/on a press). OS print jobs require an RFQ (Request For Quote) in US. If your job fits into the Either category, an RFQ is recommended, but not required. In the US, RA Strategic Sourcing will discourage or reject RFQs for jobs that fall within the JIT category. Guidelines differ for black & white and color printing, so be sure to check the correct tables.Black & White PrintingColor PrintingColor PrintingPrint Spec SheetJIT Printing SpecificationsRA-QR005G-EN-P - 3/29/2010Printing SpecificationYOUR DATA HEREInstructionsNO(required) Category:JIT / PODSelect Print Category A,B,C or D from category list, on "Introduction_Catagory Types" tab11 x 17LOOSE -Loose LeafYESPre-sale / MarketingTOP(required) Finished Trim Size Width:8.5 x 118.5 x 11PERFECT - Perfect BoundA1LEFT(required) Publication Number :2706-TD007-EN-ESample: 2030-SP001B-EN-P3 x 5SADDLE - Saddle StitchA2RIGHTCORNERUse Legacy NumberYES or NO18 x 24 PosterPLASTCOIL - Plastic Coil (Coil Bound)A4BOTTOMSIDELegacy Number if applicable:Sample Legacy Number: 0160-5.3324 x 36 PosterSTAPLED1 -1 positionA3Publication Title:InView Message Display SpecificationsSample: ElectroGuard Selling Brief80 character limit - must match DocMan Title36 x 24 PosterSTAPLED1B - bottom 1 positionA5(required) Business Group:Marketing CommercialAs entered in DocMan4 x 6STAPLED2 - 2 positionsA6(required) Cost Center:19021As entered in DocMan - enter number only, no description. Example - 19021CMKMKE CM Integrated Arch - 19021CMKMKE Market Access Program - 191054.75 x 7 (slightly smaller half-size)THERMAL - Thermal bound (Tape bound)A7Binding/Stitching:SADDLE - Saddle StitchReview key on right...Saddle-Stitch Items All page quantities must be divisible by 4.Note: Stitching is implied for Saddle-Stitch - no need to specify in Stitching Location.80 pgs max. on 20# (text and cover)76 pgs max. on 20# (text) and 24# (cover)72 pgs max. on 24# (text and cover)Perfect Bound Items940 pgs max. w/cover (90# index unless indicated otherwise)70 pgs. min. for spine without words200 pgs min. for spine with words Plastcoil Bound Items530 pgs max. of 20# (if adding cover deduct equivalent number of pages to equal cover thickness) (90# index unless indicated otherwise)Tape Bound Items250 pgs max. on 20# no cover240 pgs max. w/cover (90# index unless indicated otherwise)4.75 x 7.75THERMALO - Thermal Bound (Tape bound - offline)A8(required) Page Count of Publication:12Total page count including cover5.5 x 8.5 (half-size)A9Paper Stock Color:White is assumed. For color options contact your vendor.6 x 4Post Sale / Technical CommunicationNumber of Tabs Needed:5 tab in stock at RR Donnelley7.385 x 9 (RSI Std)B1Stitching Location:SIDEBlank, Corner or Side8.25 x 10.875B2Drill Hole YES/NOYESAll drilled publications use the 5-hole standard, 5/16 inch-size hole and a minimum of inch from the inner page border.8.25 x 11 (RA product profile std)B3NoneGlue Location on Pad:Glue location on pads8.375 x 10.875B4Half or V or Single FoldNumber of Pages per Pad:Average sheets of paper.. 25, 50 75,100 Max9 x 12 (Folder)B5C or Tri-FoldInk ColorOne color assumes BLACK / 4 color assume CMYK / Indicate PMS number hereA4 (8 x 11 ) (210 x 297 mm)CatalogsDbleParllUsed in Manufacturing:A5 (5.83 x 8.26) (148 x 210 mm)C1SampleFold:Review key on right...Short (must specify dimensions between folds in Comments)Comments:This is an electronic only document. Print specs are attached just in case needed in future.C2Z or Accordian FoldPart Number:JIT / PODMicrofold or French Fold - designate no. of folds in Comments - intended for single sheet only to be put in box for manufacturingD1Double GateD2FoldsHalf, V, Single C or TriDble ParllZ or Accordian Microfold or FrenchDouble Gate Short FoldD3D4D5D6D7D8D9MBD000CCD74.binMBD000D141F.binMBD000E357A.binMBD000D05AE.binMBD000B37AA.binMBD000C2CF0.binMBD000CBFEF.binMBD000B71E5.binMBD000AB9B4.binMBD000AF7AA.bin