The given device is the device for the nonlinear analysis of a functional
condition of a human body (bioresonant testing).
The equipment allows to track any conditions of biological object
(body, a fabric, separate cages and even separate chromosomes) from
norm to a deep pathology on change of wave characteristics of fabrics,
and also to estimate change of vortical magnetic fields of an organism.
In a method of the nonlinear analysis the estimation of a condition of
body is spent directly at the expense of resonant strengthening of
radiation of investigated body and removal of indicators by a contactless
way with use of trigger gauges.
Training program NLS - the analysis, devoted to development of initial
skills of work with the device is represented to your attention.
In the given program for brevity statements are used the following
conditional Spectral similar processes are the most probable diagnoses of
diseases or pathological processes;
Client – the same with patient
To enter into the program it is necessary to PUT on EAR-PHONES, differently
on the computer screen the inscription «can be highlighted There is no signal!
The program will be finished».
Reception of pacients
When you were included into the program, before you there is an overall
picture named further the Main menu. Here we see three windows:
2. Program adjustment
3. Developers of the program and the Exit
Beginning of the work
At the beginning of the work the section is very important.Settings
At the FIRST inclusion of the device the FIRST research is desirable for
spending in slow rate that will allow to adapt the program better. You can spend
all further researches in any rate convenient for you.
Certainly you adjust at once the program on the Language necessary to you
(English, Russian), and also is advised to put more convenient Big font.
Reception of pacients
Usually we work with the switched off sound because the constant pulsation
of a picture before eyes in a combination to sound loading can tyre investigated
(further, for brevity, "patient").
Besides, at once adjust Colour, differently pictures will be black-and-white.
The button in a card file (the card file is filled in the course of research)
allows to allocate Colour with different colours:
- Bodies and systems as much as possible amazed - they will be allocated
after research by brown colour;
- Bodies and systems with moderate changes - red colour and, at last,
- Bodies and systems without the expressed changes - green colour.
Moving a triangular label on a scale Correction of deviation of the processor,
you can arrange a ball estimation of points on a body projection in the given
processor in relation to similar points of body in the processor chosen for the
standard. However, practically we seldom recustomize the processor as fine
Already in the course of work
The key the Operator allows to choose from the list of operators of the one
who carries out the given research. To enter into the program a surname of the
new expert, it is necessary to enter into section the Manager and to press the
button the Choice of the operator. The window in which you can choose the
necessary operator will open or enter the new. CAUTIOUSLY - if you have
casually removed a surname of the operator in a card file cards surveyed these
the expert of patients automatically leave. Therefore before removing a surname
of the operator, translate all examinees on other operator, having opened a
window the Exchange of examinees.
Besides, in a window the Manager if it is necessary, you can:
- To establish or change the password of access by means of a key to
Replace the password;
- To open or close a card file investigated for other users by means of a key
to Close a card file;
- To include or switch off a mode fixing payment, brought by the patient,
having pressed a key to Consider payment.
The key to Remove by date will allow to remove all researches spent this day.
The key to Remove a card will remove a card investigated entirely, and the key
to Remove research — only one research of the given concrete body or a fabric.
The research beginning
Search of a card of the client
At first it is necessary to fill a card of the patient For this purpose we use
buttons: New or has undressed Search. If the patient has come to you
repeatedly you choose its card in the list. For this purpose translate an arrow in
a window near to a word search or a choice, click the left key of a mouse and
enter a surname of the patient. On the screen there is a necessary card.
Reception of pacients
Now we are ready to begin the study. To do this, press the button Reception
and opens the window Cartoteca.
If you have not found a card investigated in a card file, but precisely know
that it there is, that, probably, you have forgotten to change a surname of the
operator and are in not in the card file.
Card for new client
If it is necessary for you to get a card on the new patient, you press the
button New, the questionnaire thus opens. Here you specify a surname, a name,
a patronymic, necessarily age and a floor. The address and phone are specified if
necessary. You also necessarily should specify a blood type and a Rhesus factor
(and if they are unknown specify – Are unknown) It important as the program
considers modern representations that people with different blood types have
essential distinctions at selection of optimum structure of foodstuff.
Further press a key OK. the Card it is filled.
Preparation for testing
If ear-phones with magnetogenerators are put already on investigated, and
it is in a radiator zone in the right bottom corner red colour will highlight a key
Research. If the window Research does not light up, the person means drops
out of a zone of work of the device and the program does not see the examinee.
We remind: the radiator (transmitter) is established symmetrically
concerning the patient on distance no more than metre. Besides, watch, that
marks of the parties of ear-phones (L – left, R – right) corresponded to the
parties of the patient.
Having pressed the button Research, you get to section the research Scheme.
Now from four main windows of the program we know two: the Card file
(from above at the left) and the research Scheme (from above on the right).
Main windows of the program
Scheme of investigationcard-index
Remember two more: a window the Current analysis or viewing of results
(from below at the left) and the Window of standards (from below on the right).
To these windows all of us time will come back.
So, a window the research Scheme. We will consider it more in detail.
Òåêóùèé àíàëèçCurrent analysis Window of etalons
Before the beginning of testing you can enter into the computer the data about the operations transferred by the patient. For this purpose we press the Resection button, then the window will open, in which you see a figure of the person, where red points allocate areas of the most frequent operations (see also the following page).
We bring an arrow to a point corresponding to area of operation, during this
moment the necessary body is highlighted. Having clicked the left key of a
mouse (thus the red point becomes green), you confirm the choice. Further at
testing of the given body for a base picture operation will be considered.
Further you should choose Character of research necessary in this case.
Selecting the type of research
Having pressed the given button, we will see that research can be Standard,
Detailed (which allows to estimate structure of all biological formations entered
into the program) and Express research which will help to spend screening (or
search). inspection. Use the express- and standard researches is more often.
At once at inclusion of the program we see that in the research scheme
already there are tags, which from the point of view of composers are desirable
for surveying programs always to have general idea about an organism
condition. Usually the button the Program choice is thus in gear, and the
computer automatically includes in investigation of all organs and systems which
have any disturbances all bodies and systems in which in the course of express
inspection any infringements are revealed. For beginning operators it is good
secure not to pass the pathological centres.
Choice of the plan of inspection
If you do not want, that for you the program solved, you can press the
button the Independent choice and then, establishing tags in the windows which
are to the left of the name of a picture, you can independently designate those
bodies and systems which need to be surveyed. If you accept a program choice
the button to Restore a choice will return the program plan of research.
In the scheme of research the bodies concerning one system, are usually designated by one colour and gathered. For example, digestive organs pink,
vascular system – dark blue, system of respiratory organs - blue etc. In each system are the separate pictures allocated dark green are histologic cuts. To work on systems it is more convenient, but in case of need by means of the button Alphabetically it is possible to place all pictures alphabetically.
At the very beginning of the list dark blue colour designates the
topographical cuts covering large areas of an organism: cuts of a head, a thorax,
bodies organs of retroperitoneal space, bodies of a small basin etc. Having
tested only these areas, plus in addition necessarily intestines and a liver, and
also a skeleton and brushes of hands (at women - in connection with prevalence
of an osteoporosis), we at can preliminary allocate the most problem zones. For
their detailed inspection it is possible to use not only buttons the Program or
Independent choice, but also the Pictogram window.
By pressing of the button of the Pictogram in a picture interesting us there
are badges – a microscope, a magnifier, a scalpel, a blood drop, a nervous cage.
- A badge the magnifier designates body;
- A scalpel – a topographical cut of a body;
- A microscope – a histologic cut;
- A blood drop – a blood vessel etc.
If to bring the cursor to any of these badges under a badge there is a
description, and in the right bottom corner that area which will be surveyed by
For example, at inspection of a cut of a thorax at level of an ascending aorta the pathology in a bilious bubble is revealed. Having pressed the button of the Pictogram and having guided the cursor at a magnifier in the field of a bilious
bubble, we click the left key of a mouse. Research of a bilious bubble begins.
In this window also there is a button the Preparation, however, about it we
will talk later when we will prepare a preparation for the investigated.
The key the Current analysis is highlighted only when you have carried out at
least one research at the given person.
So, we are ready to research. If the button Research is active (burns with red
colour) we press it to start research. If the button Research is not highlighted,
means ear-phones are put on incorrectly not included) or investigated is out of a
pressing the left key of a mouse will be highlighted.
After pressing of the button Research opens a following window where we
At the left - a pulsing picture of body,
On the right - the schedule of resonant frequency of modulation of system is
Below - the image logarithmic polychromatic scales of Flejndlera.
Buttons pause/resume give opportunity to stop investigation.
Button *exit/next* allows to return to the scheme of investigation or
Let's address to a picture at the left. At inspection on it badges of different
colours and according to different degree of the importance are highlighted.
These badges give the chance to us to see level of functional activity of the
given body, its ability to adaptation at present, its power reserves. There are 6
kinds of the badges corresponding to a various mark estimation of results of the
1. Level of latent functional activity.
2. Level of optimum regulation.
3. Displacement of characteristics on higher level, a pressure condition
4. Asthenic condition of regulation processes
5. The compensated infringements of mechanisms of adaptation.
The level of the organ functional activity
As a whole it is considered that indicators 2 and 3 is a normal state of a
fabric, 4 — boundary (that is an exhaustion of reserves), 5 and 6
decompensation. The indicator 1 often is regarded by many experts as «sleeping
cages» as on power level correspond to power of cages of newborns.
Mark indicators most changeable as power reserves of fabrics vary depending
on a fabric food at present,innervation, conditions of vessels, emotional or
For example, the person in a condition of strong stress can have an indicator
at level 5 and 6 practically in all pictures in the absence of any serious pathology.
And on the contrary, the person having many of chronic problems can have high
6. Decompensationthe adaptation mechanisms, the expressed destructive
enough power indicator (2,3 points). Such picture often happens at use BUD
which well lift power at the expense of a good food of a cage. Thus, as we will
see further, indicators coefficient spectral similarity (ÊÑÑ) all the same will
highlight presence of chronic diseases.
To be sure in results of diagnostic and to give to the patient right
recommendations and right interpretation of diagnosis we must use several
results and tests together:
• Level of functional activity
•coefficient of spectral similarity (CSS)
• Coefficient of entropy analysis
If and at repeated research there are centres with roughly broken power
further at the picture analysis it is necessary to carry out obligatory research
this separately taken centre (in this case in heart).
Estimation of a condition
Now we will address to the schedule on the right. It is presented by two
lines – red and dark blue. From the point of view of device work the red line
designates an entering signal, dark blue – proceeding. However, it is much more
interesting to us physiological aspects of this schedule.
In norm any fabric is constantly updated, both destruction process and
updatings (anabolism) are in certain balance. The dark blue line reflects
processes of anabolism of a fabric in the schedule, and red – katabolism. In
norm these processes go in parallel, thus the dark blue line can prevail a little
over the red. At a pathology can occur dissociation these processes, and on the
schedule we will see a divergence of dark blue and red lines.
In sharp cases we see sharp increase in amplitude of the schedule (the schedule at the left). At process synchronisation amplitude the drawing decreases. Prevalence of a red line over dark blue and absence at them points of intersection can mean probability of oncology (the schedule on the right).
Let's return to the schedule: - On the bottom horizontal axis standard frequencies from 1,8 to 8,2 Hz
- The right vertical axis – a relative scale of noise level with system in decibels;
- The left vertical axis – the logarithmic scale, allowing to standardise
level of infringement of noise; - The top horizontal scale is a scale of porosity of an impulse of a measured signal in percentage. In practical work for us scales are most important bottom horizontal and right vertical.
So, the right vertical axis reflects noise in decibels. Noise level measurement
in system is the extremely important. Our organism, all cages and which
molecules are in a constant oscillative motion as makes noise which is fixed by
the device. Level of this noise can be a sign of "correctness" of functioning of
body or an organism as a whole as noise in some measure is an equivalent of
level of oxidation-reduction processes in a fabric. The size 266,6 (the maximum
decibels; figure of a vertical axis) represents that critical noise level in system
after which excess the system ceases to be functional, that is noise completely
hammers in control paths system.
The bottom horizontal axis reflects frequency characteristics of fabrics. Each cage and a fabric as a whole possesses own, frequency characteristics inherent only in them which are displayed in the form of the schedule. On the bottom horizontal axis own frequencies of fabrics which lie in following standard spectra of frequencies are postponed. 1,8 Hz - bone system. 2,6 Hz - a rough connecting fabric, joints, valves of heart, an artery and a vein. 2,6-3,4 Hz - a friable connecting fabric, cross-section-striped muscles, a heart muscle.
4,2 Hz - single-layered flat epitheliuma digestive path and urinogenital system. 4,9 Hz - multilayered flat andprismatic epithelium. A liver with channels. 4,9-5,8 Hz – epithelium fabrics of a kidney and reproductive bodies. 5,8 Hz - a lymphatic ring drinks, the top department of respiratory ways, a spleen, spleen, ovaries, prostate. 6,6 Hz - lymphatic system, peripheral and vegetative nervous system, epithelium bronchial tubes, adrenal glands, a thyroid gland. 7,4 Hz - the central departments of touch analyzers, except visual, subcrustal structures of a brain, parenchyma lungs. 8,2 Hz - a bark of cerebral hemispheres, an eye retina, an optic nerve.
When the device has stopped to test all planned bodies, automatically there
is a return to a window the Scheme of research and the Research window is
highlighted are finished. We press ÎÊ and we pass in the Current analysis .
The window where we see results of research of the given concrete body
opens. Let's lay aside buttons Meta-CORRECTION and Reprinter who be required
to us later for preparation preparation, and we will begin the analysis.
Firstly we will be engaged in a picture at the left. From above at the left
there is a button the Text, by pressing on which in a picture there are green
daggers. If to bring the cursor to a dagger, the name of anatomic structure will
be highlighted and if to click the left key of a mouse, there is a window the
Near to the button the Text is available the Pictogram button, which
appointment to us it is already known.
If at the analysis we see the centres where the power in points is obviously
lowered then the analysis of this centre makes sense to carry out. For this
purpose we press the button Localization, we bring the cursor to centre edge,
we click the left key of a mouse and we lead round area interesting us on
perimetre. Repeated pressing the left key of a mouse finishes centre allocation.
We press the button to Estimate the centre and beginsafter investigation the
centre. To remove from a picture the allocated centres we press the button the
Centers which is highlighted on the top horizontal of a picture.
So, we already know about level of functional activity of body at present on
six-point system, and we can pass to the schedule on the right. We increase the
schedule, having pressed the button the Spectrum (by the way, in all windows of
the program where the button the Spectrum will be highlighted, we will appear
in this picture). We already spoke About value of horizontal and vertical axes of
the schedule above.
If to press the button the Test or simply to put the cursor on the schedule
and to click, we will appear in a following window (the Window of standards)
where work with the schedule will be continued.
Window of etalons
So, we are in the new window – the window of etalons.
Each body and each cage possess own, inherent only to them, specific
fluctuations which, thanks to the computer, can be displayed in the form of the
certain schedule reflecting conditions of an information exchange of this body
(the schedule at the left-frequency fluctuations of a healthy brain). On the other
hand, any pathological process also has the individual schedule inherent only in
it (the schedule on the right - an ischemic stroke).
The significant amount of standards of pathological processes is entered into
Taking into account degree of their expressiveness, and also taking into
account age of investigated, its floor etc. At testing frequency characteristics of
Diagram of healthy brain Diagram of patient with ischemic stroke
investigated body automatically are compared on size of spectral similarity to
reference processes thanks to what we can reveal the closest pathological
process or the tendency to its occurrence (illness npreclinical stage).
In the top left corner the basic groups of standards to which wave
characteristics we will compare the data of the patient are listed. To reveal at
investigated processes, spectrums similar to any pathology, we put a tag before
group of standards Pathomorphology then in the bottom window corresponding
diagnoses are highlighted.
Accordingly, if we wish to check up an organism on presence of the infectious
agent the heading undertakes the standard microorganisms and Helminths if we
wish to compare a condition of bodies investigated with healthy fabrics
Organopreparation if it is necessary to pick up necessary for correction of the
given condition alloopathy preparation, that, accordingly, we put a tag
beforealloopathy. So with all other standards, except a biochemical homeostasis
about which we will talk later.
On an example pathomorphology we will disassemble testing of a pathology at the investigated. In Pathomorphology standards frequency characteristics of various pathological processes are put, and the device automatically compares them to frequency characteristics investigated (that is spectral similarity is established). Than more the schedule of the examinee is similar to the standard schedule (that is their distinction comes nearer to 0,00) the given process at the patient is especially probable.
Factor of spectral similarity
Therefore, if the factor of spectral similarity (SSC) on the given disease at
the examinee is in a zone from 0,00 to 0,425 (this zone is usually highlighted by
red colour) we speak about process spectrally similar to the given disease
(further for brevity – the diagnosis), and probability degree here comes nearer
to 95 %.
If SSC on the given disease is in a zone from 0,425 to 0,999 the probability
of presence of the given disease at the examinee approximately makes 65 %.
Accordingly, the pathological processes having spectral similarity above 1,00,
at given investigated are improbable. However, the processes connected with
oncology, should be considered up to a zone 1,500.
In the right bottom corner there is two keys a Virtual activization and to Make active all. We already said that there is zone SSC from 0,425 to 1,000, where probability of a pathology approximately 65%. This zone is extremely interesting to us because in it diseases, with which the investigated are collected: - Already suffers, but they now are in a remission condition (out of an aggravation), - And also those diseases, which else are on preclinical level. In fabrics already there are pathological changes, but they still were short generated, and consequently SSC is high enough. For specification of depth of process we use activization (it is virtual provocation) the given disease and we look how has thus changed SSC.
Usually, at diagnostics we work at once with two kinds of standards in gear Pathomorphology and microorganisms and Helminths (by the way if you have forgotten that is meant the certain diagnosis or an infection can press the button the standard Description, the detailed explanation there is offered). Some experts consider, it is necessary what to work only with one open window, then reliability above. However, by our experience reliability at two windows in gear does not suffer, and helps to see not only a pathology at investigated, but also communication of this pathology with an infection more likely.
If SSC decreases significantly and even passes to the red area so this
diagnosis is reliable (in this case by the example dyskinesia of gall bladder : at
the left – before Adjustment , at the right – after Adjustment ).
At this point it is very important to understand that the organism at the
certain period of time can’t be occupied with all problems at once, therefore
those diseases with which the organism is occupied in that moment appear in
the red area (without activation).
For example, a patient could have been suffering apparent varicose of vein
for many years and cholecystitis. But at the moment of investigation he doesn’t
have ache in the veins, and have aggravation of cholecystitis. So cholecystitis
will be within the reliability area from 0.000 to 0.425, and varicose of vein — out
of reliability area but not more than 1.000. The index of varicose of vein will
considerably decreased after Adjustment.
Diagrams of etalon and object
Other acknowledgement of reliability of the diagnosis is comparison of the
schedule of investigated (object) to the standard schedule. Pay attention that on
this page the schedule of investigated (object) is designated violet and yellow by
colours (at testing dark blue and red), and the standard schedule is designated
by red and dark blue lines.
If both buttons – Object and the Standard schedules accumulate are pressed,
and we can see, they are similar or not.
Before Adjustment After Adjustment
Schedules of the standard and object after activization. Usually standards
from a reliability zone have low ÊÑÑ and the maximum similarity with the
schedule of the investigated. However, to check up reliability of disease, we,
having allocated the diagnosis in the list of standards, we press the button
Virtual activization. Thus the schedule of the examinee will start to move in
relation to the standard schedule and if it moves on the same noise level (in
decibels) on which there is a standard the probability of the given disease is very
To estimate, what diseases pathogenic are connected with disease interesting
us at the given patient, we use a key the Standard-object.
We allocate the diagnosis interesting us, having brought to it the cursor and
having clicked the left key, then we press the Standard-object, and to the
diagnosis it is automatically appropriated SSC equal 0,000 then the diagnoses
subsequent to it (first two are especially important), are built on importance
degree in pathogenesis diseases.
Before adjustment After adjustment
Function activization Absolute model allows to estimate degree of the
importance of this or that diagnosis in formation of model of a pathological
condition investigated (to the left of the diagnosis there is a figure reflecting
individual share of each diagnosis in pathological process).
The imperative model differs from absolute that you can add any way one
more diagnosis to learn its role in a pathology of the given patient.
Imperative and absolute models
Pressing button Elimination will begin multivariate analysis which allows to
reveal pathologic processes. It is very important for revealing of latent oncology.
In a window of standards there is button Entropijnyj the analysis by which
pressing the given window opens. The entropijnyj analysis allows to spend 2
factorial analysis pathologists process. Thus the program builds mathematical
spatial model of pathological process, taking for an initial stage a healthy fabric,
and for final — clinically expressed form of the given pathology.
Such model can be presented both in the form of lines (at the left), and in
the form of surfaces (on the right). Besides, having pressed the button Object
we can compare it to the schedule of the investigated.
On this page at the beginning of training we first of all are guided by degree
of a maturity of process (from 1 to 7) which will be designated in the bottom
part of the small schedule. Thus entropy a maturity indicator
1-2 testifies about initial stages of a pathology or to absence of the
tendency in development of the given process;
3-4 about presence of the given pathology on preclinical level;
5-7 about a process maturity.
Thus, than above figure, especially mature process, the diagnosis is
The same figure then will be highlighted near to the diagnosis in the list of
standards when we will return on the previous page.
Process maturity degree
The key Vera-test cleans spatial model and allows to see the schedule having
the maximum spectral similarity with the schedule of the investigated.
Let's return to the previous window.
So, we have revealed at investigated probable pathological processes. We
need to bring them in epicrisis. For this purpose it is necessary to press at first
the button In the press, and then – Epikriz. The window where in the course of
research we bring all register all etalon*s processes with low CSS and also the
preparations necessary for correction of given processes will open.
Print of the epicrisis
Biochemical indicators (NLS-analysis)
Again we come back in a window of standards.
Here there is a button NLS - the analysis which is used only at work with a
biochemical homeostasis. We press the button to Clear, we put a tag before a
biochemical homeostasis, and in the list of standards biochemical indicators
which we can test at investigated by means of this program open.
The arrow marks the indicator necessary to us (for simplification of search I
advise to use the button to Sort which builds standards in alphabetic order),
press button NLS – the analysis and get to a corresponding window.
In the top left corner (on a light background) norms of the given indicator
are specified, and in the top left corner of the schedule the red figure reflects
size of an indicator investigate.
Besides, we can estimate indicators on figures in the bottom of the small
schedule. Within norm indicators from 2 to 6 are considered. 1 is below norm,
7 – above norm.
The principle of action of the list of standards is already clear:
If we have opened allergens, in a red zone the substances most dangerous
to the given patient causing an allergy;
If have opened, allopathy in a red zone the most suitable to correction of
the given pathology preparations;
If have opened foodstuff, in a red zone – the most useful to health given
investigated products, in a zone from 0,425 to 1,000 neutral, and above 1,000 –
On the right from above the third button Vegetotest. In this window it is spent so-called internal vegetotest at which on own electromagnetic fluctuations of investigated body electromagnetic fluctuations of standards are imposed and virtual deterioration or improvement from use of the
Window of etalons Current analysis
given preparation-standard is predicted. The preparation interesting us is for this purpose marked in the list of standards and we press button Vegetotest. Joins additional examination with the given preparation. Spent vegetotest we can see result, if we leave the given window in a window the Current analysis and we will press the button the Comparative analysis.
The comparative analysis
Here we see a card file of the spent researches, and more low two pictures. That picture in a card file before which there is a tag, will be the core, and other pictures will be compared to it. We press Autosearch, and the computer automatically selects and compares pictures, drawing the conclusion about strengthening or easing compensatory reactions, increase or reduction of the area of defeat at use of the given preparation.
Let’s return to the window Current analysis again. There also is the button
Vegetotest. However here we work with external vegetotest.
As it is impossible to include into the program the etalons of all existing
medications so with the help of resonance camera we can check the action of
those medications that are absent in etalons. Press button Vegetotest and a
window appears where we write the name of the medication, put medication
into resonance camera and press OK. Testing begins. Further actions are similar
to those during internal vegetotest.
By the way, the Comparative analysis can be used also when it is necessary
to estimate dynamics of a condition of body in time at repeatedly surveyed
In the top left window all researches which we have spent are listed. If we
bring the cursor to the necessary research, but we will not put a tag the result
will simply be highlighted on the right top picture. So we can simply see results
and if necessary again to analyse them.
If we have put a tag the given picture passes in the press. Having seen all
researches and having marked pictures necessary for the press with tags, we
press the button the Press. After listing of pictures press the button to Print
So, we have held testing, have picked up preparations. It is necessary to
print results of inspection.
For this purpose we come back in the Card file and we press the button the
•Except testing of pathological processes and selection of corresponding
medical products, we can prepare (by means of Reprinter) or to spend necessary
Recording on disk
In the same window the Card file is the button Save to disk. She allows to
transfer the information on the spent researches on the external carrier. It is
important, if you work on different computers as allows to restore results of the
researches spent on one computer, and to enter them into memory of another.
In a window the Card file below the button New settles down a pure window.
It serves for a conclusion writing if was insufficiently epicrisis
1 variant: For a basis of a preparation we take frequencies of as much as possible similar standard (for example, a diabetes), we will transform insulin-dependent diabetes them in opposite on polarity and identical under the form (that is we make inversion) and we prepare a preparation.
For preparation preparation the Preparation (keys serve in a window the
research Scheme), to Reprinter and to Invert (in a window of the Current
analysis and in a window of standards).
We can prepare two kinds of preparations:
Scheme of investigation Current analysis
Window of etalons
Further we enter into a window of Reprinter and once again we recheck,
whether inversion (otherwise the preparation will have opposite an effect as
does not normalise pathological wave characteristics, and, on the contrary, will
strengthen them) is made. After inversion in the right top corner of the schedule
there are letters Inv.
2 variant: We make a preparation in which wave characteristics of the most suitable medical product undertake a basis from the catalogue of standards. Here too it is necessary to invert at first the standard as medical products are written initially down in the program already in the inverted kind
Water use for correction of sharp processes, spirit – sharp and chronic, sugar – chronic is more often. Paraffin uses for external application at skin diseases and at defeat of peripheral nervous system. On one matrix it is possible to write down some preparations (for example, at sharp conditions from 2 to 4). However, the above the voltage of written down preparations, the smaller quantity can be written down them.
Further we should choose a matrix on which we will write down the transformed
and strengthened information. As a matrix can serve:
- Ethyl spirit,
At manufacturing of a preparation on the basis of own frequencies of the
pathological centre, information carrying over on one matrix from the several
centres is possible.
For this purpose we leave in a window the Current analysis, we spend
allocation of the necessary centres by means of the button Localization, we press
the button to Estimate the centre and, upon termination of testing, we leave in a
The button Start preparation begins preparation manufacturing, Stop
preparation – stops.
By the same principle, as bioresonant copies of medical products, we can
create and nozode preparations of microorganisms and allergens.
Now we will address to a mode META -Therapy .
For this purpose we leave in a window the Current analysis and we press the
button META -Therapy.
Practically, here we deal with bioresonant influence on investigated the
electromagnetic fluctuations inverted in relation to the pathological centre.
By means of the cursor and the left key of a mouse it is brought a green
window of Reprinter.
By means of the cursor and the left key of the mouse the first centre is
chosen, we invert and is pressed the button to Begin manufacturing. Then it is
similarly worked with a following centre etc.
Results of a session are estimated by means of a mode the Comparative
If process carries functional or an acuity for one session strengthening
compensatory reactions to 20 % and more can be marked. In such cases usually
it is required from 1 to 3 sessions.
If process chronic or is available organic defeat improvement on 10-20 % is
marked, thus improvement goes slowly, and it is required.
label to the defeat centre, we press a key Start-up and it is visible an appearing
concentric wave. Thus there is a correction and restoration normal for the given
body of frequency fluctuations, and colours originally exposed badges,