3
Catalog Number Notes Type DOWNLIGHTING 6G1 LED 90CRI GIMBAL Accessories: Order as separate catalog number. TSA6 Makes non-bracket housings compatible with LED module FL2LED Makes L7XF housings compatible with LED module 6G1 LED Series/Finish Lamp CCT/CRI/W/Lumens 2 Voltage Options Series 6G1 6" Gimbal module Finish MW Matte white 1 MB Matte black BN Brush nickel ORB Oil-rubbed bronze 1 LED (blank) 3000K/83CRI/10.8W/620L 27K 90CRI 2700K/91CRI/11W/680L 30K 90CRI 3000K/91CRI/10.3W/790L 40K 90CRI 4000K/94CRI/10.5W/820L (blank) 120V L7XLED T24 IC/Non-IC rated, new construction rough-in LED base L7XRLED T24 IC/Non-IC rated, remodel rough-in LED base LC6LED T24 IC/Non-IC rated, new construction rough-in LED base L7X IC/Non-IC rated, new construction rough-in 3 L7XR IC/Non-IC rated, remodel rough-in 3 LC6 IC/Non-IC rated, new construction rough-in 3 ORDERING INFORMATION For shortest lead times, configure product using bolded options. Example: 6G1MW LED 40K 90CRI L7XLED T24 6G1 IC/Non-IC Retrofit Gimbal Specifications Aperture: 3-7/16 (8.6) Ceiling opening: as rough-in Length: 6-1/8 (15.5) Height: 4-1/2 (11.4) Overlap trim: 7-1/4 (18.41) All dimensions are inches (centimeters) unless otherwise indicated. 3-7/16 (8.6) 6-1/8 (15.5) 7-1/4 (18.41) 4-1/2 (11.4) 35° FEATURES & SPECIFICATIONS INTENDED USE — The adjustable LED Gimbal downlighting module is 80% more efficient than incan- descent luminaries, performing for 35,000 hours or more with exceptional energy efficiency and near zero maintenance. Multiple trim finish options are available to pick the style that matches the décor for any office or home. The LED Gimbal is intended for sloped ceiling applications, grazing textured surfaces, wall washing, and highlighting artwork or other architectural features. Retrofits into most existing recessed downlighting installations or new construction and remodel applications. CONSTRUCTION — Spun steel gimbal reflectors with 180° of rotation and at least 35° of adjustable tilt in both directions. Driver affixed to a static yoke to allow maximization of LED light engine rotation and pivot movements. OPTICS — Diffused lens at end of mixing chamber to provide even light distribution for general illumina- tion, equivalent to 65W incandescent flood lamp. Wide flood beam angle at >90°. CRI >90. Equivalent to 65-watt incandescent. The LED module maintains at least 70% light output for 35,000 hours. ELECTRICAL — Primary power disconnect provided for simple connection to a dedicated LED connector in the housing. Dimming down to 15%. For compatible dimmers, refer to Compatible Dimmers Chart. INSTALLATION — Suitable for installation in standard height rough-in sections. E26 socket adapter and splice kit ships standard. This enables easy installation or permanent conversion to an LED source for Title 24 compliance. Trim retention is achieved by utilizing two side-mounted torsion springs to ensure a consistently tight fit with the ceiling and easy installation. LISTINGS — CSA certified to US and Canadian safety standards. ENERGY STAR® certified; California T24 compliant. Damp location listed. WARRANTY — 5-year limited warranty. Complete warranty terms located at www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx Note: Actual performance may differ as a result of end-user environment and application. All values are design or typical values, measured under laboratory conditions at 25 °C. Specifications subject to change without notice. Notes 1 Available in 90CRI only. 2 Total system delivered lumens. 3 Must be ordered on separate line. D I M M A B L E E26 Adaptor (included) Hardwire Kit (included) FL2LED Fluorescent Adapter Kit

INTENDED USE 6G1€¦ · office or home. The LED Gimbal is intended for sloped ceiling applications, grazing textured surfaces, wall washing, ... All values are design or typical

  • Upload
    others

  • View
    2

  • Download
    0

Embed Size (px)

Citation preview

Page 1: INTENDED USE 6G1€¦ · office or home. The LED Gimbal is intended for sloped ceiling applications, grazing textured surfaces, wall washing, ... All values are design or typical

Catalog Number

Notes

Type

DOWNLIGHTING 6G1 LED 90CRI GIMBAL

Accessories: Order as separate catalog number.

TSA6 Makes non-bracket housings compatible with LED moduleFL2LED Makes L7XF housings compatible with LED module

6G1 LED

Series/Finish Lamp CCT/CRI/W/Lumens2 Voltage Options

Series6G1 6" Gimbal

module

FinishMW Matte white1

MB Matte blackBN Brush nickelORB Oil-rubbed

bronze1

LED (blank) 3000K/83CRI/10.8W/620L27K 90CRI 2700K/91CRI/11W/680L30K 90CRI 3000K/91CRI/10.3W/790L40K 90CRI 4000K/94CRI/10.5W/820L

(blank) 120V L7XLED T24 IC/Non-IC rated, new construction rough-in LED baseL7XRLED T24 IC/Non-IC rated, remodel rough-in LED baseLC6LED T24 IC/Non-IC rated, new construction rough-in LED baseL7X IC/Non-IC rated, new construction rough-in3

L7XR IC/Non-IC rated, remodel rough-in3

LC6 IC/Non-IC rated, new construction rough-in3

ORDERING INFORMATION For shortest lead times, configure product using bolded options. 7

Example: 6G1MW LED 40K 90CRI L7XLED T24

6G1IC/Non-IC

Retrofit Gimbal

SpecificationsAperture: 3-7/16 (8.6)Ceiling opening: as rough-inLength: 6-1/8 (15.5)Height: 4-1/2 (11.4)Overlap trim: 7-1/4 (18.41)

All dimensions are inches (centimeters) unless otherwise indicated.

3-7/16(8.6)

6-1/8(15.5)

7-1/4(18.41)

4-1/2(11.4)

35°

FEATURES & SPECIFICATIONSINTENDED USE — The adjustable LED Gimbal downlighting module is 80% more efficient than incan-descent luminaries, performing for 35,000 hours or more with exceptional energy efficiency and near zero maintenance. Multiple trim finish options are available to pick the style that matches the décor for any office or home. The LED Gimbal is intended for sloped ceiling applications, grazing textured surfaces, wall washing, and highlighting artwork or other architectural features. Retrofits into most existing recessed downlighting installations or new construction and remodel applications.

CONSTRUCTION — Spun steel gimbal reflectors with 180° of rotation and at least 35° of adjustable tilt in both directions. Driver affixed to a static yoke to allow maximization of LED light engine rotation and pivot movements.

OPTICS — Diffused lens at end of mixing chamber to provide even light distribution for general illumina-tion, equivalent to 65W incandescent flood lamp.

Wide flood beam angle at >90°. CRI >90. Equivalent to 65-watt incandescent. The LED module maintains at least 70% light output for 35,000 hours.

ELECTRICAL — Primary power disconnect provided for simple connection to a dedicated LED connector in the housing. Dimming down to 15%. For compatible dimmers, refer to Compatible Dimmers Chart.

INSTALLATION — Suitable for installation in standard height rough-in sections. E26 socket adapter and splice kit ships standard. This enables easy installation or permanent conversion to an LED source for Title 24 compliance. Trim retention is achieved by utilizing two side-mounted torsion springs to ensure a consistently tight fit with the ceiling and easy installation.

LISTINGS — CSA certified to US and Canadian safety standards. ENERGY STAR® certified; California T24 compliant. Damp location listed.

WARRANTY — 5-year limited warranty. Complete warranty terms located at www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx

Note: Actual performance may differ as a result of end-user environment and application.

All values are design or typical values, measured under laboratory conditions at 25 °C.

Specifications subject to change without notice.

Notes

1 Available in 90CRI only.

2 Total system delivered lumens.

3 Must be ordered on separate line.

DIM

MABLE

E26 Adaptor (included)

Hardwire Kit (included)

FL2LEDFluorescent Adapter Kit

Page 2: INTENDED USE 6G1€¦ · office or home. The LED Gimbal is intended for sloped ceiling applications, grazing textured surfaces, wall washing, ... All values are design or typical

6G1 6" LED Gimbal Module

6G1 LED 90CRI GIMBAL

DOWNLIGHTING: One Lithonia Way, Conyers, GA 30012 Phone: 800-315-4935 Fax: 770-860-3129 www.lithonia.com © 2013-2016 Acuity Brands Lighting, Inc. All rights reserved. Rev. 12/27/16

PHOTOMETRICS

6G1MW LED 30K 90CRI, 3000 K LEDs, input watts: 10.3, delivered lumens: 842, LM/W = 87, test no. LTL28363, tested in accordance with IESNA LM 79-80.

6G1MW LED 40K 90CRI, 4000 K LEDs, input watts: 10.5, delivered lumens: 831, LM/W = 79 test no. LTL28362, tested in accordance with IESNA LM 79-80.

6G1MW LED 27K 90CRI, 27000 K LEDs, input watts: 11, delivered lumens: 678, LM/W = 62, test no. LTL28364, tested in accordance with IESNA LM 79-80.

ENERGY DATA - 6G1

Lumens 680 790 820

watts 11 10.32 10.54

LPW 61.2 76.6 77.8

CRI 91 91 94

Color Temp 2700 3000 4000

Minimum Starting Temp 0°F (-18°C) 0°F (-18°C) 0°F (-18°C)

EMI/RFI FCC Title 47 CFR, Part 15, Class A FCC Title 47 CFR, Part 15, Class A FCC Title 47 CFR, Part 15, Class A

Min. Power Factor 0.80 0.80 0.80

Input current 0.09A 0.09A 0.09A

Distribution Curve Distribution Data Output Data Coefficient of Utilization Illuminance Data at 30” Above Floor for a Single Luminaire

0° 20°

40°

60°

80°

200

Ave Lumens05152535455565758590

285283268239201157114723670

277611012512110272389

Zone Lumens % Lamp0° - 30°0° - 40°0° - 60°0° - 90°

90° - 180°0° - 180°

212.5337.8560.6679.30.0

679.3

31.349.782.5100.00.0

*100.0*Ef�ciency

Coef�cients of Utilization%02fp

pc 80% 70% 50%pw 50% 30% 10% 50% 30% 10% 50% 30% 10%012345678910

119105928273655954494542

119101867464575045413734

11997806858504439353229

116103908071645853484541

11699847364565045413734

11696796757504439353229

11198877769625651474440

11195827162554944403734

11193786657494439353229

RC

R

50% beam -60.4°

10% beam -104.7°

MountingHeight

Inital FCCenterBeam Diameter FC Diameter FC

8.010.012.014.016.0

9.45.13.22.21.6

6.48.711.113.415.7

4.72.51.61.10.8

14.319.424.629.835.0

0.90.50.30.20.2

0° 20°

40°

60°

80°

200

Ave Lumens05

152535455565758590

3523493312962481941429145100

3393136155150127904812

Zone Lumens % Lamp0° - 30°0° - 40°0° - 60°0° - 90°

90° - 180°0° - 180°

262.2417.1693.9842.90.0

842.9

31.149.582.3

100.00.0

*100.0*Ef�ciency

Coef�cients of Utilization%02fp

pc 80% 70% 50%pw 50% 30% 10% 50% 30% 10% 50% 30% 10%012345678910

119105928173655954494542

119101867464565045413734

11997806758504439353229

116103908071645853484541

11699847363565045403734

11696796757504439353229

11198877769625651474340

11195827162554944403633

11193776656494339353129

RC

R

50% beam -60.3°

10% beam -104.9°

MountingHeight

Inital FCCenterBeam Diameter FC Diameter FC

8.010.012.014.016.0

11.66.33.92.71.9

6.48.711.013.415.7

5.83.12.01.31.0

14.319.524.729.935.1

1.20.60.40.30.2

0° 20°

40°

60°

80°

90°

0°0°0° 90°

180°

100

200

300

Coefficients of Utilization

pf 20%

pc 80% 70% 50%

pw 70%50%30% 50%30%10% 50%30%10%

119

109

100

91

84

78

72

67

62

58

55

119

105

92

81

72

65

59

54

49

45

42

119

101

86

74

64

56

50

45

41

37

34

116

103

90

80

71

64

58

53

48

44

41

116

99

84

73

63

56

50

45

40

37

34

116

96

79

67

57

50

44

39

35

32

29

111

98

87

77

69

62

56

51

47

43

40

111

95

82

71

62

55

49

44

40

36

33

111

93

77

66

56

49

43

39

35

31

29

RC

R

0

1

2

3

4

5

6

7

8

9

10

Zonal Lumen Summary

Zone Lumens % Lamp % Fixture

0° - 30°

0° - 40°

0° - 60°

0° - 90°

90° - 180°

0° - 180°

257

410

683

831

0

831

31.0

49.3

82.2

100.0

0.0

100.0

31.0

49.3

82.2

100.0

0.0

100.0

CP Summary

0° 90

15°

25°

35°

45°

55°

65°

75°

85°

90

345

344

327

292

247

195

144

93

48

13

1

345

341

321

286

239

188

136

87

41

7

0

Page 3: INTENDED USE 6G1€¦ · office or home. The LED Gimbal is intended for sloped ceiling applications, grazing textured surfaces, wall washing, ... All values are design or typical

6G1 6" LED Gimbal Module

6G1 LED 90CRI GIMBAL

DOWNLIGHTING: One Lithonia Way, Conyers, GA 30012 Phone: 800-315-4935 Fax: 770-860-3129 www.lithonia.com © 2013-2016 Acuity Brands Lighting, Inc. All rights reserved. Rev. 12/27/16