intelligent ID PA/VA - Notifier Fire Systems PAVA... · highlights • Designed for BS 5839 part 8 and BS EN 60849 compliance • Total critical path surveillance • Flexible voice

ID PA/VA

intelligentpublic addressandvoice alarmequipment

highlights• Designed for BS 5839 part 8 and BS

EN 60849 compliance

• Total critical path surveillance

• Flexible voice alarm and public

address functionality

• High-integrity, flexible & reliable

processor-based system

• Front-panel or optional PC

programming tool

• Auto-learn amplifier and loudspeaker

circuit commissioning

• Unique fully monitored touchscreen

microphone technology

• Up to 64 touchscreen microphones

• Up to 256 inputs

• Up to 256 zones

• Up to 256 duty amplifiers

• Up to 64 standby amplifiers

• Up to 32 digital messages

• Class-leading audio quality

introductionThe Notifier ID PA/VA range of

intelligent voice alarm equipment has

been developed to provide a high

quality, fully compliant PA/VA solution

benefiting both installers and their

customers.

A simple, intuitive touchscreen human

interface eases routine operation,

whilst commissioning is carried out via

straightforward controls on the router.

Operation is easy, despite the

sophisticated audio and control

processing which provides unparalleled

system flexibility and commissioning

adjustments.

From microphones, music sources and

message units, through routers,

amplifiers and surveillance systems, to

loudspeakers the range includes all

elements of a system. All systems are

designed and built by Notifier to ensure

not only the quality of deliveries, but

also ongoing system support.

microphones

Emergency and public address

touchscreen microphones are available

to access up to 96 zone/zone groups.

Full password-protected control of

digital message broadcast is possible,

and the unit displays both zone activity

and detailed fault status. A monitor

loudspeaker acts as both broadcast

monitor and fault sounder. More

conventional paging microphones are

also available, featuring one, four or

eight zone capacity.

routers

Controlling zones in groups of four,

the router range allows systems to be

created, from the simplest to the most

complex. All configuration is carried

out on the front-panel, and the final

commissioning settings can be easily

saved on a PC for archiving. The

routers include digital message

capability, and also monitor the

connected amplifiers and loudspeaker

circuits. Where applicable set-up is

automatic, and a PC programming tool

is available.

amplifiersThe modular range of amplifiers comes

in 60W, 120W and 240W blocks to suit

the project.

Fully monitored standby amplifiers can

also be included to ensure full

compliance.

loudspeakersA full range of high quality

loudspeakers is available, selected to

provide audible, intelligible

announcements whilst minimising

installation effort.

specifications

IDA4 - 4 Zone System

APA Amplifier Rangepower 60, 120 and 240 Watts

input sensitivity 0 dB

frequency response 40 Hz - 20 kHz

distortion <1% at nominal power

signal to noise ratio >90 dB

LED indication power, signal, fault

output voltage 100 V

cooling automatic fan

protection thermal & overload

AC supply 230V 50/60 Hz

DC supply 20 - 28 V

dimensions APA60 100x395x130mm (WxDxH)

qty. per RKAPA frame 4





weight APA60 6.5 kg

weight APA120 6.5 kg

weight APA240 10 kg

PSS Microphone Rangecapsule high quality electret

user interface backlit touchscreen

LED indication power, evac, fault

connection RJ45

cable CAT-5 STP or

fire-rated equivalent

power supply 24 V DC nominal

maximum cable run 1,500m

dimensions 250x140x80mm (WxDxH)

colour RAL 9006

weight 1.5 kg

IDA Router RangePSS input 1

audio input 4

zone capacity 4

message quantity 4

total message length 131 seconds per IDA

message bandwidth 8 kHz

message sample rate 16 kHz

message depth 16 bits

message recording on & off-site capability

priority levels 9

input EQ 3 band parametric

input impedance 10 k �

input sensitivity 0 dB

maximum level +14 dBV

audio bandwidth 10 Hz - 22 kHz

sampling rate 48 kHz

sampling depth 24 bits

distortion 0.02% @ 1 kHz

output EQ 7 band parametric

output delay 0 - 683 msec

output impedance 50 �

output level 0 dB

output noise <-88 dBA

dynamic range >102 dBA

monitor output 8 �

power handling 500 Watts per zone

PSS surveillance capsule

pre-amplifier

touchscreen

processor

loudspeaker

connections

output surveillance amplifier operation

amplifier gain

loudspeaker impedance

circuit earth leakage

event log 500 faults/events

display 2 line 16 character

IDA4M/S - 5 to 256 ZoneSystem Expansion

• High quality electret microphone

• Backlit touchscreen

• Paged control views to simplify

operation

• Code protected operation

• Intuitive display of system activity

• Integral fault sounder/broadcast

monitor

• Full control of pre-recorded

messages

Designed specifically for an IDA 4

Compact PA/VA system, the PSS849

microphone provides full control and

indication facilities for small to

medium sized systems.

The fully monitored backlit

touchscreen groups together all

functions required by BS 5839 part 8

and EN 60849, whilst maintaining

a clear and easy to use operator

interface.

Programming is achieved at the central

equipment, using the IDA4 Compact's

front-panel controls. Microphone

buttons are freely assignable to zones

or zone groups, button text can be

defined, access to pre-recorded

messages can be set and levels and

priorities can be programmed. If

required, access to the microphone can

be restricted using a numeric code.

Operators can make live

announcements with speech level

displayed on an integral meter, with or

without chime signal. Pre-recorded

messages can be routed and busy and

fault status indication is provided per

zone, with a separate area for system

activity and fault status display. An

inbuilt loudspeaker acts as both

broadcast monitor and fault sounder,

and is muted during live

announcements to prevent feedback.

All essential elements are monitored,

including microphone capsule, power

supply, touchscreen, audio circuitry and

connections, data circuitry and

connections.

PSS 849 touchscreen emergency microphone

items in rangePSS849

Touchscreen Emergency Desk

Microphone

highlights description

Capacity: up to 12 zones/zone groups

Capsule: high quality electret

User interface: backlit touchscreen

LED indication: power, evac and fault

Connection: RJ45

Cable: 4 Pair screened fire-rated

Power supply: 24 V DC nominal

Maximum cable run: 1,500m dependent on cable type

Dimensions: 250 x 140 x 80mm (WxDxH)

Control angle: 30˚

Colour: RAL 9006

Weight: 1.5 kg

specifications

where used


• Backlit touchscreen

• Paged control views to simplify

operation

• Code protected operation

• Intuitive display of system activity

• Integral fault sounder/broadcast

monitor

• Full control of pre-recorded

messages

• Full control of background

music broadcast

The PSS microphone range provides full

control and indication facilities for an

ID PA/VA system. Each IDA 4M, 4MS,

4XM or 4XMS can accept one PSS

microphone, with up to 64 touchscreen

microphones possible on a system.

The fully monitored backlit

touchscreen groups together all

functions required by BS 5839 part 8

and EN 60849, whilst maintaining a

clear and easy to use operator

interface.

Programming is achieved at the central

equipment, using the IDA front-panel

buttons or the optional PC

programming tool. Buttons are freely

assignable to zones or zone groups,

button text can be defined, access to

pre-recorded messages can be set and

levels and priorities can be

programmed. If required, access to the

microphone can be restricted using a

numeric code.

Operators can make live

announcements with speech level

displayed on an integral meter, with or

without chime signal. Pre-recorded

messages and background music can be

routed, with music level adjustment

(IDA 4XM/XMS). Busy and fault status

indication is provided per zone, with a

separate area for system activity and

fault status display. An inbuilt

loudspeaker acts as both broadcast

monitor and fault sounder, and is

muted during live announcements to

prevent feedback.

All essential elements are monitored,

including microphone capsule, power

supply, touchscreen, audio circuitry and

connections, data circuitry and

connections.

PSS touchscreen emergency microphone range

items in rangePSS12DT


Microphone 12 Zones

PSS24DT


Microphone 24 Zones

PSS48DT


Microphone 48 Zones

PSS72DT


Microphone 72 Zones

PSS96DT


Microphone 96 Zones


Capacity: 12, 24, 48, 72 or 96 zones/zone groups


User interface: backlit touchscreen

LED indication: power, evac and fault

Connection: RJ45

Cable: 4 Pair screened fire-rated (CAT5-STP for non-emergency use)


Maximum cable run: 1,500m dependent on cable type (500m CAT5)


Control angle: 30˚

Colour: RAL 9006

Weight: 1.5 kg

specifications

where used


• Integrated adjustable pre-amplifier

• Integrated limiter

• Integrated adjustable chime

generator

• Multiple microphone cascade

connection

• Modern styling

The DIGI range of conventional paging

microphones is designed to provide

simple and economical routine paging

access to the ID PA/VA system.

A cardioid-response microphone

capsule feeds an integrated pre-

amplifier, which features local level

adjustment and an integrated limiter

to accommodate varying operator

technique. A chime signal can be set

to precede announcements, generated

within the microphone and permitting

level and tone adjustment. A high

level fully balanced output minimises

the effect of cable noise pickup to

maintain an excellent signal to noise

ratio and paging speech intelligibility.

Each zone button has a free label area

for zone designations, and is fitted

with LED indication for 'zone select'.

Zones or zone groups may be

programmed as required at the

applicable IDA series controller unit.

The wall mounted connection box

allows up to twenty microphones to be

connected to a single IDA series

controller in cascade format. These

microphones will then operate in 'first-

come, first-served' configuration to

prevent access conflicts.

DIGI paging microphone range

items in rangeDIGIM1

Single Button Paging Microphone

DIGIM4

Four Button Paging Microphone

DIGIWM

Wall Mounted Connection Box


Capacity: 1 or 4 buttons


LED indication: select per button, power

Output level +6 dBu balanced

Connection: 9 pin D type

Cascade capacity: 20 units maximum

Cable: CAT-5 STP or equivalent


Maximum cable run: 2,000m dependent on cable type


Gooseneck: 250mm

Colour: light grey

specifications

where used

• Serial fire detection system link

• Processor controlled

• Digital signal processing

• Total critical signal path surveillance

• Parametric input and output

equalisation

• Output delay lines

• Programmable priority

• Amplifier/loudspeaker circuit

surveillance

• Class leading audio quality

• Field programmable high quality

messages

• Cascadeable architecture

• VOX or contact audio access

descriptionForming the heart of the BS 5839 part

8 and EN 60849 ID PA/VA system, the

IDA4 range performs all surveillance,

routing, message generation and signal

processing functions. Amplifier and

loudspeaker circuit monitoring is fully

integrated, including standby amplifier

surveillance and switching.

A serial link to the ID series of fire

detection panels will achieve full

integration and system flexibility, with

minimal equipment and installation

costs.

The IDA4 Compact provides a solution

for small systems with staged

evacuation, allowing up to four zones

to be controlled from one touchscreen

microphone.

The IDA4M and IDA4MS extend the

solution for medium to large projects,

with a cascadeable format permitting

phased evacuation systems of up to

256 zones, 32 messages, 256 audio

inputs and 64 touchscreen microphones

to be created.

The IDA4XM and IDA4XMS build on

the facilities provided by the 4M and

4MS, adding RS485 public address

microphone and volume

adjustment/programme selection

capability, and sophisticated ambient

noise sensing and control.

Each IDA4 unit has an input for a

touchscreen microphone, four digital

messages (total length up to 131

seconds), four audio inputs, a monitor

loudspeaker output and four main

audio outputs. When cascaded, a 32

channel digital audio and control bus

links up to 64 units.

All faults are logged with a time and

date stamp, and displayed on the IDA4,

IDA4M or IDA4XM front panel display.

All settings can be archived on a

standard PC using the integral serial

link, and access can be password-

protected using a numeric code for

maximum security. A sixteen character

'site name' can be entered which will

be displayed on connected touchscreen

microphones; for example this could

be used for the supplier's emergency

call-out number.

IDA4 PA/VA controller range

items in rangeIDA4

Compact Voice Alarm Controller

IDA4M

Master Voice Alarm Controller

IDA4MS

Slave Voice Alarm Controller

IDA4XM

Master Public Address/

Voice Alarm Controller

IDA4XMS

Slave Public Address/

Voice Alarm Controller

highlights

PSS input: 1 per IDA4

Audio input: 4 per IDA4

Zone capacity: 4 per IDA4

Message quantity: 4 per IDA4

Total message length: 131 seconds per IDA4

Message bandwidth: 8 kHz

Message sample rate: 16 kHz

Message depth: 16 bits

Message recording: on & off-site capability

Priority levels: 9

Input EQ: 3 band parametric

Input impedance: 10 k �

Input sensitivity: 0 dBu

Maximum level: +14 dBV

Audio bandwidth: 10 Hz - 22 kHz

Sampling rate: 48 kHz

Sampling depth: 24 bits

Distortion: 0.02% @ 1 kHz

Output EQ: 7 band parametric

Output delay: 0 - 683 msec

Output impedance: 50 �

Output level: 0 dBu

Output noise: <-88 dBA

Dynamic range: >102 dBA

Monitor output: 8 �

Power handling: 500 Watts per zone

PSS surveillance: capsulepre-amplifiertouchscreenprocessorloudspeakerconnections

Output surveillance: amplifier operationamplifier gainloudspeaker impedance/end of linecircuit earth leakage

Event log: 500 faults/events

Display: 2 line 16 characters



Colour: RAL 7016

Weight: 3 kg

specifications

• Dual circuits from a single amplifier

• Processor controlled

• Total critical signal path surveillance

• Automatic hardware bypass

• Monitored manual bypass option

The IDA4SU provides useful additional

functions within an ID PA/VA system.

The unit's surveillance and isolation

capabilities enable dual (A & B)

loudspeaker circuits to be powered

from a single amplifier, representing a

major saving in equipment quantities

whilst maintaining full compliance to

the requirements of BS 5839 part 8

and EN 60849.

In addition, the IDA4SU constantly

communicates with its associated IDA4

controller, and in the event of a

catastrophic failure of that controller

the IDASU will allow all-call emergency

paging announcements to be made

from the connected WSS or PSS series

microphone unit.

Although such failure of an IDA

controller is extremely unlikely

(as the processes and programmes

are constantly monitored by

watchdogs and memory checking

routines with automatic processor

re-start) this simple hardware bypass

provides an added degree of

resilience. If required, the unit

includes monitored contact inputs to

allow the bypass to be 'forced' via

a separate manual control.

IDA4SU voice alarm controller switching unit

items in rangeIDA4SU

Voice Alarm Controller Switching Unit


Compatibility: IDA4, IDA4M, IDA4XM, IDA4Ms, IDA4XMs

Zone Capacity: 4 zones, A & B circuits

Bypass: analogue hardware



Colour: RAL 7016

Weight: 3 kg

specifications

where used

• Modular System

• 60W, 120W or 240W Power Rating

• Balanced 0dB Input

• 100V Line Output

• Thermostatic Ventilation

• 230V AC and 24V DC Power Supplies

• Connections via Detachable Screw

Terminal Blocks

The APA amplifier system is designed

for perfect integration within an ID

PA/VA system. The 4U RKAPA

mounting frame can house up to four

APA60 units, up to four APA120 units,

or up to two APA240 units (or

combinations) as required.

Designed to meet the requirements of

BS 5839 part 8 and EN 60849, each

amplifier is fitted with its own

independent 230V AC mains and 24V

DC battery supply maximising system

integrity. In addition to standard fuse

protection, the amplifiers feature

sophisticated electronic and thermal

protection.

An individual front-panel power

isolator assists maintenance functions,

whilst the gain controls are pre-set and

mounted on the rear panel to deter

unauthorised adjustments. When

used with the IDA series of system

controllers, gain settings are controlled

externally to the amplifier and local

amplifier gain settings are monitored.

Each amplifier includes a temperature-

controlled cooling fan, which circulates

air only when a certain temperature

threshold has been reached. This

airflow can assist the cooling of all

elements of a rack-based PA/VA system.

Front panel indicators are provided

to signal power supply present

(AC and DC), audio present and fault

status. Fault status is also signalled on

rear panel contact outputs.

APA amplifier range

items in rangeAPA60

60W 100V Line Amplifier

APA120


APA240


RKAPA

4U Amplifier Mounting Frame


Power: 60, 120 or 240 Watts

Input sensitivity: 770 mV rms

Frequency response: 40 Hz - 20 kHz

Distortion: <1% at nominal power

Signal to noise ratio: >90 dB

LED indication: power, signal and fault

Output voltage: 100 V

Cooling: automatic fan

Protection: thermal & overload

AC supply: 230 V 50/60 Hz

DC supply: 20 - 28 V

Dimensions APA60: 100 x 395 x 130mm (WxDxH)

Qty. per RKAPA frame: 4





Weight APA60: 6.5 kg

Weight APA120: 6.5 kg

Weight APA240: 10 kg

specifications

where used

RCS4/FTS round metal ceiling loudspeaker

Rated power, Watts 4

Tappings 100 volt line, Watts 4/2/1/0.5/0.25

Transformer Impedance, Ohms, 100V 2.5k/5k/10k/20k/40k

Tappings 70.7 volt line, Watts 2/1/0.5/0.25/0.13

Driver impedance, Ohms 8

Effective frequency range, Hz 220 – 16,500

S.P.L. @ 1m, 1 watt, dB, Test Signal Bandwidth 100Hz-10 kHz 83

S.P.L. @ Full power Octave Bandwidth, dB 89

Acoustic Power (dB-PWL@1 watt) 1k/2k Hz 81/84

Dispersion at 1k/2k Hz, Degrees RCS4/FTS: 140/180

Directivity Axial Q factor, 1k/2k Hz RCS4/FTS: 1.70/2.20

Dimensions, diameter, mm RCS4/FTS: Ø132

Net weight, Kgs RCS4/FTS: 0.92

Colour/Finish White RAL9016

Material Steel

Mounting Fixing Springs x 4 (stainless steel)

Cut-out, mm RCS4/FTS: Ø115

BS5839 Part 8 voice alarm compliant

specifications

Circuit D iagram

C10

0VO

MM

ON

4W2W1W

0.5 W

0.25

W

Polar Pattern

1K Hz

2K Hz

4K Hz

8K Hz

500Hz

10

0

-10

-20

-30

o0

o90o-90

o-30

o-60

o30

o60

10

0

-10

-20

-30

o

0

o90o-90

o-30

o-60

o30

o60

RCS 4/FTS

RCS 4/T

B K

60

70

80

90

100

dB

20 200 2kHz 20k

A : Frequency Response , MAGN d B Re 2 0 .0 0 Pa

50

Frequency Response

RCS 4/T Side View 93

Ø75 ( Grille )

Ø115 ( Cutout )

Ø132

C

98

RCS 4/FTS Side View

CeramicTerminal Block

unit: mmunit: mm



Tappings 100 volt line, Watts 6/3/1.5/0.75/0.25

Transformer Impedance, Ohms, 100V 1.67k/3.33k/6.66k/13.3k/39.9k

Tappings 70.7 volt line, Watts 3/1.5/0.75/0.375/0.125


Effective frequency range, Hz (BS6840) 100–17,500



Acoustic Power (dB-PWL@1 watt) 1 k/2kHz, dB 92/93


Directivity Axial Q factor, 1k/2kHz RCS5/FTS: 1.9/6.6

Dimensions, diameter, mm Ø189



Material Steel

Mounting Torsion springs



specifications

RCS 5/T Side View

110

476

Ø140 ( Grille )

Ø160 ( Cutout )

Ø189

10

0V

C

OM

MO

N

6W3W

1.5W

0.75

W

0.25

W

C ircuit D iagram

6 0

70

80

90

100

110

dB

2 0 2 0 0 2 kH z 2 0 k

A : F requency R esponse , MAG N d B R e 2 0 .0 0 P a

B K

Frequency Response

Polar Patt ern

1K Hz

2K Hz

4K Hz

8K Hz

10

0

-10

-20

-30

o0

o18 0

o90o-90

o-30

o-60

o-12 0

o-15 0

o30

o60

o12 0

o15 0

500Hz

unit: mm unit: mm

RCS 5/FTS Side View


specificationsRated power, Watts 6





Effective frequency range, Hz (BS6840) 85 – 18,500

S.P.L. @ 1m, 1 watt, dB, Test Signal Bandwidth 100Hz-10kHz 92


Acoustic Power (dB-PWL@1 watt) 1k/2kHz, dB 88/90


Directivity Axial Q factor, 1k/2kHz RCS6/FTS: 2.1/6.5




Material Steel




37

110

218

RCS 6/T Side View

110

50

Ø182 (cutout) 10

Ø175 ( Grille )

Ø182 ( Cutout )

Ø 239

10

0V

C

OM

MO

N

6W3W

1.5W

0.75

W

0.25

W

C ircuit D iagram

6 0

70

80

90

100

110

dB

2 0 2 0 0 2 kH z 2 0 k


B K

Frequency Response

Polar Patt ern

1K Hz

2K Hz

4K Hz

8K Hz

10

0

-10

-20

-30

o0

o18 0

o90o-90

o-30

o-60

o-12 0

o-15 0

o30

o60

o12 0

o15 0

500Hz

unit: mm unit: mm

RCS 6/FTS Side View



Tappings 100 volt line, Watts 10/5/2.5/1.25

Transformer Impedance, Ohms, 100V 1k/2k/4k/8k

Tappings 70.7 volt line, Watts 5/2.5/1.25/0.625







Directivity Axial Q factor, 1 k/2kHz RCS8/FTS: 3.6/7.8




Material Steel




specifications

RCS 8/FTS Side View

244

2

118

116

10Ø 240 (cutout)

RCS 8/T Side View

110

637Ø225

( Grille )Ø236

( Cutout )Ø280

10

0V

C

OM

MO

N

10W5W

2.5W

1.25

W

C ircuit D iagram Polar Patt ern

1K Hz

2K Hz

4K Hz

8K Hz

10

0

-10

-20

-30

o0

o18 0

o90o-90

o-30

o-60

o-12 0

o-15 0

o30

o60

o12 0

o15 0

500Hz

6 0

70

80

90

100

110

dB

2 0 2 0 0 2 kH z 2 0 k


B K

Frequency Response

unit: mm unit: mm


Tappings 100 volt line, Watts 20/10/5/2.5

Transformer Impedance, Ohms, 100V 500/1k/2k/4k

Tappings 70.7 volt line, Watts 10/5/2.5/1.25


Effective frequency range, Hz (BS6840) 80-18,000


S.P.L. @ Full power, Octave Bandwidth, dB 107

Acoustic Power (dB – PWL@1 watt) 1 k/2kHz, dB 95/90

Dispersion at 1k/2k Hz, Degrees 140/160 (Vertical), 360/360 (Horizontal)

Directivity Axial Q factor, 1k/2kHz 4.3/4.7

Dimensions, front & depth, mm Ø254

Net weight, Kgs 2.40

Colour/Finish White

Material ABS moulding with UV inhibitors

Mounting Pendant hung

BS5839 voice alarm compliant

GB20/TC ABS spherical loudspeaker

specifications

Ø 254

GB20/T Side View

B K

A : H emispherical F requency R esponse , MAG N d B R e 2 0 .0 0 P a , 1 w/1 m

B K

6 0

70

80

90

100

110

dB

2 0 2 0 0 2 kH z 2 0 k

Frequency Response

B K

Vert icalPolar Pattern

1K Hz

2K Hz

4K Hz

8K Hz

10

0

-10

-20

-30

o0

o18 0

o90o-90

o-30

o-60

o-12 0

o-15 0

o30

o60

o12 0

o15 0

500Hz

Horizontal Polar Patterno60 Inclination

B K

5

0

-5

-10

-15

o0

o18 0

o90o-90

o-30

o-60

o-12 0

o-15 0

o30

o60

o12 0

o15 0

GB20/T

B K

Circuit D iagram

100V COMMON

20W

10W

5W

2.5W

unit: mm

SENTRY4/STC vandalproof metal cabinetloudspeaker



Transformer Impedance, Ohms, 100V 2.5k/5k/10k/20k







Dispersion at 1k/2k Hz, Degrees 110/120

Directivity Axial Q factor, 1 k/2kHz 3.2/3.8

Dimensions, front & depth, mm 130 x 130 x 88

Net weight, Kgs 1.2


Material Steel

Mounting Screw


specifications

Side View

130

8 8

19Ø7

7.5

9

Top View

20

88

130

20

10

0V

C

OM

MO

N

1 4W2WW

0.5W


1K Hz

2K Hz

4K Hz

8K Hz

500Hz

10

0

-10

-20

-30

o0

o90o-90

o-30

o-60

o-12 0

o-15 0

o30

o60

o12 0

o15 0o18 0

B K

6 0

70

80

90

100

dB

2 0 2 0 0 2 kH z 2 0 k


5 0

Frequency Response

unit: mm unit: mm

SENTRY6/STC vandalproof metal cabinetloudspeaker



Transformer Impedance, Ohms, 100V 1.67k/3.33k/6.66k/13.3k/40k










Net weight, Kgs 1.8


Material Steel Front, Die cast back box

Mounting Screw


specifications

unit: mm

In Wall Version

SENTRY 6/TBBC

Spring Loaded

170

BACK BOX 170 x170 x 70

Front View

SENTRY6/STC

190

140

190

Top View 20

x

2

164

4 0 35

C10

0VO

MM

ON

6W3W

1.5W

0.75

W

0.25

W


1K Hz

2K Hz

4K Hz

8K Hz

500Hz

o18 0

10

0

-10

-20

-30

o0

o90o-90

o-30

o-60

o-12 0

o-15 0

o30

o60

o12 0

o15 0

6 0

70

80

90

100

dB

2 0 2 0 0 2 kH z 2 0 k


B K

5 0

Frequency Response

unit: mm unit: mm

SENTRY6/BDTC vandalproof bi-directional metalcabinet loudspeaker



Transformer Impedance, Ohms, 100V 1.67k/3.33k/6.66k/13.3k/40k


Driver impedance, Ohms 4 (single driver:8)








Net weight, Kgs 2


Material Steel

Mounting Screw


specifications

6W3W

1.5W

0.75

W

C ircuit D iagram

10

0V

C

OM

MO

N

Po lar Patt ern

HORIZONTALVERTICAL

1K Hz

2K Hz

4K Hz

8K Hz

500Hz

o0

o18 0

o90

o30

o60

o12 0

o15 0

10

0

-10

-20

-30o-90

o-30

o-60

o-12 0

o-15 0

B K

6 0

70

80

90

100

dB

2 0 2 0 0 2 kH z 2 0 k


5 0

Frequency Response

unit: mm unit: mm

Side View

98

130

1919

Ø77.

5210

Top View

2x Ø20 98

PBC10/TCOAXC moulded cabinet loudspeaker














Colour/Finish White

Material ABS Moulding with UV inhibitors,Steel mesh

Mounting Keyhole and/or screws


specifications

Front View

330

240

Top View

90

240

C ircuit D iagram

2.5W

C10

0VO

MM

ON

1.25

W

10W5W

Po lar Patt ern

10

0

-10

-20

-30

o0

o18 0

o90o-90

o-30

o-60

o-12 0

o-15 0

o30

o60

o12 0

o15 0

1K Hz

2K Hz

4K Hz

8K Hz

500Hz

B K


dB

2 0 2 0 0 2 kHz 2 0 k6 0

70

80

90

100

110

Frequency Response

unit: mm unit: mm

PBC6/TC moulded cabinet loudspeaker










Dispersion at 1k/2k Hz, Degrees 160/ 120




Colour/Finish White

Material ABS moulding with UV inhibitorsSteel mesh

Mounting Keyhole and/or screws


specifications

Front View

330

240

Top View

90

240

C10

0VO

MM

ON

6W3W

1.5W

0.75

W

0.25

W


1K Hz

2K Hz

4K Hz

8K Hz

500Hz

10

0

-10

-20

-30

o0

o18 0

o90o-90

o-30

o-60

o-12 0

o-15 0

o30

o60

o12 0

o15 0

60

70

80

90

100

110

dB

2 0 2 0 0 2 kH z 2 0 k


B K

Frequency Response

unit: mm unit: mm

CELL10/BDTC metal sound projector bi-directional

Rated power, Watts 20 (10W x 2, Bi-directional)






S.P.L. @ 1m, 1 watt, dB, Test Signal Bandwidth 100Hz – 10 KHz 88


Acoustic Power (dB-PWL@1 Watt) 1k/2k Hz, dB 87/89

Dispersion at 1k/2k Hz, Degrees 160/120 (each direction)

Directivity Axial Q factor, 1k/2kHz 2.20/2.80 (each direction)

Dimensions, front & depth, mm Ø140 x 196



Material Aluminium with Stainless steel hardware

Mounting Aluminium sliding bracket


specifications

Side View

196

5 515

15

60

60

M4

Front View

Mounting Slider

Ø14

0

C ircuit D iagram

10

0V

C

OM

MO

N

20W

10W

5W

2.5W

Po lar Patt ern

10

0

-10

-20

-30

o0

o18 0

o90o-90

o-30

o-60

o-12 0

o-15 0

o30

o60

o12 0

o15 0

1K Hz

2K Hz

4K Hz

8K Hz

500Hz

6 0

7 0

8 0

9 0

1 0 0

11 0

dB

2 0 2 0 0 2 kH z

2 0 k


B K

Frequency Response

unit: mm

CELL10/BDT

CELL10/TC metal sound projector







S.P.L. @ 1m, 1 watt, dB, Test Signal Bandwidth 100Hz 10 kHz 91


Acoustic Power (dB-PWL@1 Watt) 1k/2k Hz, dB 87/90




Net weight, Kgs 2.0


Material Aluminium with Stainless steel hardware

Mounting Aluminium U bracket


specifications

Side View

2 5

191

95 5

Ø14

0

Front View

30 30

150

3

125.

5

Ø3 x 7

Circuit D iagram

10

0V

C

OM

MO

N

10W5W

2.5W

1.25

W

Po lar Patt ern

10

0

-10

-20

-30

o0

o18 0

o90o-90

o-30

o-60

o-12 0

o-15 0

o30

o60

o12 0

o15 0

1K Hz

2K Hz

4K Hz

8K Hz

500Hz

6 0

7 0

8 0

9 0

1 0 0

11 0

dB

2 0 2 0 0 2 kH z

2 0 k


B K

Frequency Response

unit: mm unit: mm

CELL10/T

CAD20/TC moulded sound projector









Acoustic Power (dB-PWL@1 watt) 1k/2kHz,dB 89/90





Colour/Finish White

Material ABS Plastic with UV inhibitor andStainless steel hardware



specifications

Front View

30 30

145

Ø 138

Ø 135

185

Ø3 x 7

Side View unit: mm

25

045

17426

Ø116

d

Circuit D iagram

10

0V

C

OM

MO

N

20W

10W5W

2.5W

Po lar Patt ern

1K Hz

2K Hz

4K Hz

8K Hz

500Hz

10

0

-10

-20

-30

o0

o18 0

o90o-90

o-30

o-60

o-12 0

o-15 0

o30

o60

o12 0

o15 0

6 0

7 0

8 0

9 0

1 0 0

11 0

dB

2 0 2 0 0 2 kHz

2 0 k

B K


Frequency Response

unit: mm unit: mm

CAD20/T

MCS20/TC metal column loudspeaker









Acoustic Power (dB-PWL@1 watt) 1k/2k Hz, dB 85 /89

Dispersion at 1k/2k Hz, Degrees 180/140 (horizontal) 70/120 (vertical)

Directivity Q factor, 1k/2kHz 4.20 /5.80

Drive Units 2x75 cone driver, 1 x HF unit

Dimensions, front & depth, mm 368 x98 x90



Material Aluminium

Mounting Steel L bracket


specifications

C10

0VO

MM

ON

20W

10W

5W

2.5

W

MCS20/T C Polar Patt ern

HORIZONTALVERTICAL

1K Hz

2K Hz

4K Hz

8K Hz

500Hz

o0

o18 0

o90

o30

o60

o12 0

o15 0

10

0

-10

-20

-30o-90

o-30

o-60

o-12 0

o-15 0

B K

60

70

80

90

100

110

dB

20 200 2kHz 20k


Frequency Response

Top and Bottom View

9098

368

unit: mmunit: mm

MCS40/TC metal column loudspeaker


Tappings 100 volt line, Watts 40/20/10/5

Transformer Impedance, Ohms, 100V 250/500/1k/2k

Tappings 70.7 volt line, Watts 20/10/5/2.5





Acoustic Power (dB-PWL@1 watt) 1k/2k Hz, dB 97/89

Dispersion at 1k/2k Hz, Degrees 170/140 (horizontal)

60/55 (vertical)


Drive Units 4x75mm cone driver, 1xHF unit




Material Aluminium

Mounting Steel L bracket


specifications

C10

0VO

MM

ON

40W

20W

10W 5

W

MCS40/T C Polar Patt ern

HORIZONTALVERTICAL

1K Hz

2K Hz

4K Hz

8K Hz

500Hz

o0

o18 0

o90

o30

o60

o12 0

o15 0

10

0

-10

-20

-30o-90

o-30

o-60

o-12 0

o-15 0

B K

60

70

80

90

100

110

dB

20 200 2kHz 20k


Frequency Response

Top and Bottom View

90

Front View

98

615

unit: mmunit: mm

PH10/TC weatherproof horn loudspeaker





Driver impedance, Ohms 20 or 8




Acoustic Power (dB-PWL@1 watt) 1k/2k Hz, dB 95/97



Dimensions, front & depth, mm 138 x 200


Colour/Finish Grey RAL7035

Material ABS plastic housing with UV inhibitors

Mounting Stainless Steel U Bracket

IP Rating 66


specifications

20

200

95Ø

87

Ø 138

Side View

30 30

105 3x Ø7

2.5

108

Front View

100V

COM

MON

1.25

W

2.

5W

5W

10W

Circuit Diagram

Polar Pattern

1K Hz

2K Hz

4K Hz

8K Hz

500Hz

10

0

-10

-20

-30

o0

o18 0

o90o-90

o-30

o-60

o-12 0

o-15 0

o30

o60

o12 0

o15 0

7 0

8 0

9 0

1 0 0

11 0

1 2 0

dB

2 0 2 0 0 2 kH z 2 0 k

B K


Frequency Response

unit: mmunit: mm

PH10/T










Acoustic Power (dB-PWL@1 watt) 1 kHz, dB 98/98

Dispersion at 1k/2kHz, Degrees 130/70







IP Rating 66


specifications

25

254

109 .5

Ø 97

f 20

3

Side View

30 30

120

2.5

124.

5

3x Ø 7

Front View

2.5W

5W

10

W

20W

100V

COM

MON

Circuit Diagram

Polar Pattern

1K Hz

2K Hz

4K Hz

8K Hz

500Hz

10

0

-10

-20

-30

o0

o18 0

o90o-90

o-30

o-60

o-12 0

o-15 0

o30

o60

o12 0

o15 0

7 0

8 0

9 0

1 0 0

11 0

1 2 0

dB

2 0 2 0 0 2 kH z 2 0 k

B K


Frequency Response

unit: mmunit: mm

PH20/T




Transformer Impedance, Ohms, 100V 330/660/1.32k/2.64k






Acoustic Power (dB-PWL@1 watt) 1 kHz, dB 101/100

Dispersion at 1k/2kHz, Degrees 110/80







IP Rating 66


specifications

2 8 7

30

125

Ø 12

0

Ø 23

8

Side View

3xØ7

30 30

135

3

154

Front View

3.75

W

7.

5W

15

W

30W

100V

COM

MON

Circuit Diagram

Polar Pattern

1K Hz

2K Hz

4K Hz

8K Hz

500Hz

10

0

-10

-20

-30

o0

o18 0

o90o-90

o-30

o-60

o-12 0

o-15 0

o30

o60

o12 0

o15 0

2 0 2 0 0 2 kH z 2 0 k

B K


7 0

8 0

9 0

1 0 0

11 0

1 2 0

dB

Frequency Response

unit: mmunit: mm

PH30/T



Transformer Impedance, Ohms, 100V 333/667/1.33k/2.66k







Dispersion at 1k/2kHz, Degrees 100/120 (horizontal), 60/120 (vertical)

Directivity Q factor, 1k/2kHz 8.50/6.50

Dimensions, front & depth, mm 442 x 260 x 287.5

Net weight, Kgs 5.5


Material ABS Plastic with UV inhibitors



MSH30/TC music horn loudspeaker

specifications

Side View unit: mm

192

270

287.5

45 050

Front View

442

260

3

3 x 10 ø

334

Circuit D iagram

10

0V

C

OM

MO

N

30W

15W

7.5

W

3.7

5 W

Po lar Patt ern

HORIZONTALVERTICAL

1K Hz

2K Hz

4K Hz

8K Hz

500Hz

o0

o18 0

o90

o30

o60

o12 0

o15 0

10

0

-10

-20

-30o-90

o-30

o-60

o-12 0

o-15 0

B K

6 0

70

80

90

100

110

dB

2 0 2 0 0 2 kH z 2 0 k


Frequency Response

unit: mmunit: mm

available only from your NOTIFIER Engineered System Distributor

Every care has been taken in the preparation of this data sheet but no liability can be accepted for the use of the information therein. Design features may be changed or amended without prior notice.

local distributor

Ref:

460

(010

5)Charles Avenue

Burgess Hill

W. Sussex

RH15 9UF

T: +44 (0) 1444 230 300

F: +44 (0) 1444 230 888

E: [email protected]

www.notifierfiresystems.co.uk

UK AUSTRALIA BENELUX BRAZIL CANADA CHILE CHINA GERMANY HONG KONG INDIA ITALY

POLANDJORDAN LEBANON MEXICO SINGAPORE SOUTH AFRICA SPAIN SWEDEN USARUSSIA VENEZUELA

NOTIFIER international offices

Documents

intelligent ID PA/VA - Notifier Fire Systems PAVA... · highlights • Designed for BS 5839 part 8 and BS EN 60849 compliance • Total critical path surveillance • Flexible voice