Embed Size (px)
Citation preview
Integrated Washer DryerMWDI7555
Please read these instructions carefully before attempting to install or use this appliance.We recommend that you keep these instructions in a safe place for future reference.
Installation and Operating Instructions
THE PERFECT BALANCE OF FUNCTION AND STYLE
LAUNDRY - DISHWASHING - COOKING - COOLING
Thank you for choosing this Montpellier Integrated Washer Dryer
Our Integrated Washer Dryer has been designed to provide you with the best combination of style, reliability and performance to give you years of trouble-free use.
You may be familiar with a similar product, but please take time to read these instructions carefully before installing or using your Integrated Washer Dryer to ensure you get the most from your purchase.
We recommend that you keep this manual in a safe place for future reference.
Your Integrated Washer Dryer is covered by a comprehensive two year Parts & Labour Guarantee. In the unlikely event that you experience a problem with your Integrated Washer Dryer, you can rest assured that you are fully protected against the cost of repairs for the first 24 months . Please note that any claim must be accompanied by the model reference number, serial number and proof of purchase.
To activate your guarantee, you will need your product serial number. This can be found on the rear of the machine.
There are two ways to register your Guarantee:
• Online: Visit the Support page on our website and complete the online Product Registration form. www.montpellier-appliances.com
• By Post: Simply detach and fill in the form provided, attach a stamp and send it in the post. Don’t forget to include your e-mail address so that we can send confirmation through to you.
Welcome
Note: We are unable to take registrations over the phone.
ACROSS ALL OUR MODELS
YEARGUARANTEE
PARTS & LABOUR
www.montpellier-appliances.com
4
Carefully read this manual for correct and safe appliance use and for helpful tips on efficient maintenance.
Only use the washing machine after carefully reading these instructions. We recommend you always keep this manual on hand and in good condition for any future owners.
Please check that the appliance is delivered with this instruction manual, warranty certificate, service centre address and energy efficiency label. Also check that plugs, drain hose support hook and liquid detergent or bleach tray (only on some models) are included. We recommend you keep all these components.
Each product is identified by a unique 16- character code, also called the “serial number”, printed on the sticker. This can be found inside the door opening. This code is a unique code for your product that you will need to register the product warranty, or if you need to contact the Customer Service Centre.
This appliance is marked according to the European directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE).
WEEE contains both polluting substances (which can cause negative consequences for the environment) and basic components (which can be re-used). It is important to have WEEE subjected to specific treatments, in order to remove and dispose properly all pollutants, and recover and recycle all materials. Individuals can play an important role in ensuring that WEEE does not become an environmental issue; it is essential to follow some basic rules:
WEEE should not be treated as householdwaste;
WEEE should be handed over to the relevantcollection points managed by the municipality orby registered companies. In many countries, forlarge WEEE, home collection could be present.
In many countries, when you buy a new appliance, the old one may be returned to the retailer who has to collect it free of charge on a one-to-one basis, as long as the equipment is of equivalent type and has the same functions as the supplied equipment.
1. GENERAL SAFETY RULES
2. INSTALLATION
3. PRACTICAL TIPS
4. MAINTENANCE AND CLEANING
5. QUICK USER GUIDE
6. CONTROLS AND PROGRAMS
7. DRYING CYCLE
8. AUTOMATIC WASHING/DRYING CYCLE
9. THROUBLESHOOTING AND WARRANTY
EN
5
1. GENERAL SAFETYRULES
This appliances is intended tobe used in household andsimilar applications such as:- Staff kitchen areas in shops, offices
and other working environments;- Farm houses;- By clients in hotels, motels and
other residential type environments;- Bed and breakfast type environments.A different use of this appliancefrom household environment orfrom typical housekeepingfunctions, as commercial use byexpert or trained users, is excludedeven in the above applications. Ifthe appliance is used in a mannerinconsistent with this it may reducethe life of the appliance and mayvoid the manufacturer’s warranty.Any damage to the appliance orother damage or loss arisingthrough use that is not consistentwith domestic or household use(even if located in a domestic orhousehold environment) shall notbe accepted by the manufacturer tothe fullest extent permitted by law.
This appliance can be used bychildren aged from 8 years andabove and persons with reducedphysical, sensory or mentalcapabilities or lack of experienceand knowledge if they have beengiven supervision or instructionconcerning use of the appliance
in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
Children should be supervisedto ensure that they do not playwith the appliance.
Children of less than 3 yearsshould be kept away unlesscontinuously supervised.
If the supply cord is damaged, itmust be replaced by themanufacturer, its service agent orsimilarly qualified persons in orderto avoid a hazard.
Only use the hose-setssupplied with the appliance forthe water supply connection (donot reuse old hose-sets).
Water pressure must be between0.05 MPa and 0.8 MPa.
Make sure carpets or rugs donot obstruct the base or any ofthe ventilation openings.
The OFF condition is reachedby placing the reference mark onthe programmes control/knob inthe vertical position. Any otherdifferent position of such controlsets the machine in ON condition(only for models with programmesknob).
6
The final part of a washer dryercycle occurs without heat (cooldown cycle) to ensure that theitems are left at a temperaturethat ensures that the items willnot be damaged.
After installation, the appliancemust be positioned so that theplug is accessible.
The appliance must not beinstalled behind a lockabledoor, a sliding door or a doorwith a hinge on the oppositeside to that of the washer dryer,in such way that a full openingof the washer dryer door isrestricted.
The maximum load capacity ofdry clothes depends on themodel used (see control panel).
The appliance is not to be usedif industrial chemicals havebeen used for cleaning.
Do not dry unwashed items inthe washer dryer.
Items that have been soiled withsubstances such as cooking oil,acetone, alcohol, petrol, kerosene,spot removers, turpentine, waxesand wax removers should bewashed in hot water with an extraamount of detergent before beingdried in the washer dryer.
Items such as foam rubber(latex foam), shower caps,waterproof textiles and rubberbacked articles and clothes orpillows fitted with foam rubberpads should not be dried in thewasher dryer.
Fabric softeners, or similarproducts, should be used asspecified by the fabric softenerinstructions.
Oil-affected items can ignitespontaneously, especially whenexposed to heat sources suchas a washer dryer. The itemsbecome warm, causing anoxidation reaction in the oil,Oxidation creates heat. If theheat cannot escape, items canbecome hot enough to catchfire. Piling, stacking or storingoil-effected items can preventheat from escaping and socreate a fire hazard.
If it is unavoidable that fabricscontain vegetable or cooking oilor have been contaminated
WARNING: Never stop a washer dryer before the end of the drying cycle unless all items are quickly removed and spread out so that
6
by hair care products be placed in a washer dryer they should first be washed in hot water with extra detergent - this will reduce, but not eliminate, the hazard.
Remove all objects frompockets such as lighters andmatches.
To consult the product technicalspecification please refer to themanufacturer website.
Before cleaning or maintainingthe washing machine, unplugthe appliance and turn off thewater tap.
Make sure the electrical systemis earthed. Otherwise, seek qualified professional assistance.
Please do not use converters,multiple sockets or extensioncords.
Make sure there is no water inthe drum before opening thedoor.
Do not pull on the power cordor appliance to unplug themachine.
Do not expose the washingmachine to rain, direct sunlightor other weather elements.Protect from possible freezing.
When moving, do not lift thewashing machine by the knobsor detergent drawer; duringtransport, never rest the door onthe trolley. We recommend twopeople lift the washing machine.
In the event of fault and/or malfunction, turn off the washing machine, close the water tap and do not tamper with the appliance. Immediately contact the Customer Service Centre and only use original spare parts. Failure to observe these instruction may jeopardise appliance safety.
By placing the mark on this product, we are confirming compliance to all relevant European safety, health and environmental requirements which are applicable in legislation for this product.
Safety instructions
WARNING: Water may reach very high temperatures during the wash cycle.
7
B
B
2. INSTALLATION
Release the power cord and 1 drain hose from the securing
clip at the rear of the machine. A A
Remove the 2 or 4 transportationB
A
screws (A) on the back andA
B
remove the 2 or 4 flat washers, rubber bungs and plastic spacer
tubes (B) as illustrated in figure 1.
If the washing machine is built-in,unscrew the 3 or 4 transportationscrews (A) and remove the 3 or4 flat washers, rubber bungs andplastic spacer tubes (B).
During the removal of the screwsoccasionally spacer tubes fallinside the product, these can beremove by tilting the product forward 2
and recovering them from the floor A or inside the base of the machine.
Cover the open transportationscrew holes with the 2 or 4
1 2 3
plastic caps included in theinstruction bag.
B WARNING:
keep packaging materials away from children.
Place the corrugated plastic sheet, found on top of the appliance during the unpacking process, into the base of the C
appliance as shown in figure 2 3 (according to the model, consider version A, B or C). 2 1
8
Position the template onto thereverse of the furniture door. Itis possible to mount the hingesand closure magnet on the rightor left-hand side depending onyour requirements. Mark thescrew hole positions, then drillout these positions.
Fix the hinges in place with the4 screws provided (A).
Fix the magnet (B) in placeusing screw (C).
Mount the plate (D) on the rightor left-hand side, depending onyour installation requirements.Place the plastic support (E)under the plate and fix it inposition with screw (F).
Snap mount cap (G) in thelower position.
Instructions for mounting the furniture door
9
Mount the furniture door to thefront of the washer using thehinges. Place the spacersunder the hinges (I) and then fixin position with screw (H).
Slide the washer into anopening of the size indicated inthe diagram opposite. A furnitureplinth may be run across the frontof the appliance, but its height willbe dictated by the height thewasher is set at.
The 4 adjustable feet allow theheight of the washer to beadjusted from 820 mm to amaximum of 840 mm. To adjustthe height, you should removethe nuts fitted to each foot andreplace these with the 5 mmnuts supplied. Raise the feet toyour desired height and thenfully tighten the lock nut to thebase of the washer.
We suggest mounting the furniture door so that it opens towards the left, which is the same direction as the porthole door. This will leave more space when you are loading washing into the appliance.
82
0 m
in.
82
5 m
in.
10
ma
x 1
00
cm
Hydraulic connections 3
Connect the water hose to the water supply tap (fig. 3) only using the hose supplied with the appliance (do not reuse old hose-sets).
Some models may include one or more of the following features:
HOT&COLD (fig. 4): water mains connection settings with hot and cold water for higher energy savings. Connect the grey tube to the cold water tap and the red one to the hot water tap. The machine can be connected to the cold water tap only: in this case, some 1 programs may start a few minutes later.
AQUASTOP (fig. 5): a device located on the supply tube that stops water flow if the tube deteriorates; in this case, a red mark will appear in the window “A” and the tube must be 5 6 replaced. To unscrew the nut, press the one-way lock device "B".
B
AQUAPROTECT – SUPPLY TUBE WITH GUARD (fig. 6): Should water leak from the primary A internal tube "A", the transparent A containment sheath "B" will contain water to permit the washing cycle to complete. At the end of the cycle, contact the Customer Service Centre to replace the 7 supply tube.
Setting
The washing machine should be installed in its final position such that the water fill hose is not kinked or trapped. The corrugated drain hose should be inserted into suitable drain pipe of between 50 cm and 85 cm height above the floor using the curved drain hose support. If an under sink connection is used the drain hose must be routed above the sink overfill opening to prevent back siphoning. Care
+2,6 mt max
min 4 cm
min 50 cm
must be taken to avoid kinking or trapping the drain hose (fig. 7).
max 85 cm
4
B
11
Level the appliance using the feet as illustrated in figure 8: 8 a. turn the nut clockwise to release the
screw; b. rotate the foot to raise or lower it until it A
touches to the floor; c. lock the foot, screwing in the nut, until it
tightens against to the bottom of the washing machine. B
Plug in the appliance.
WARNING:
contact the Customer Service Centre C should the power cord need replacement.
Detergent drawer
The detergent draw is split into 3 compartments as illustrated in figure 9:
compartment "1": for prewash detergent; 9
: for special additives, 1 softeners, starch fragrances, etc.;
2
WARNING: only use liquid products; the washing machine is set to automatically dose additives at each cycle during the last rinse.
compartment "2": for washing detergent.
WARNING: some detergents are not designed for use in the dispenser drawer but are supplied with their own dispenser that is placed in the drum directly.
WARNING: installation faults are not covered by the manufacturers warranty.
12
3. PRACTICAL TIPS
WARNING: when sorting laundry, make sure:
- have eliminated metallic objects such as hair clips, pins, coins, from laundry;
- to have buttoned pillow cases, closed zips, tied loose belts and long robe ribbons;
- to have removed rollers, hooks or clips from curtains;
- to have carefully read clothing washing labels;
- to have removed any persistent stains using specific detergents.
When washing rugs, bedcovers or other
heavy clothing, we recommend you avoid the spinning cycle.
To wash wool, make sure the item can be machine washed and marked by the “Pure virgin wool” symbol with the “Does not mat” or “Machine washable” label.
A guide environmentally friendly and economic use of your appliance.
Maximise The Load Size
Achieve the best use of energy, water, detergent and time by using the recommended maximum load size. Save up to 50% energy by washing a full load instead of 2 half loads.
Do you need to pre-wash?
For heavily soiled laundry only! SAVE detergent, time, water and between 5 to 15% energy consumption by NOT selecting Prewash for slight to normally soiled laundry.
Is a hot wash required?
Pretreat stains with stain remover or soak dried in stains in water before washing to
reduce the necessity of a hot wash programme. Save up to 50% energy by using a 60°C wash programme.
Before using a drying programme…
SAVE energy and time by selecting a high spin speed to reduce the water content in laundry before using a drying programme.
Following is a quick guide with tips and recommendations on detergent use at the various temperatures. In any case, always read the instructions on the detergent for correct use and doses.
13
4. MAINTENANCE ANDCLEANING
To clean the washing machine exterior, use a damp cloth, avoiding abrasives, alcohol and/or solvents. To maintain a good wash performance we recommend that the soap drawer and pump filters are regularly cleaned. A monthly service wash, using a proprietary cleaner is also recommended.
We recommend you clean the drawer toavoid accumulating detergent and additiveresidue.
To do this, extract the drawer using slightforce, clean it with running water andreinsert it in its housing.
Ensure the siphon cap is correctlyrefitted.
The washing machine comes with aspecial filter able to trap large residue,such as buttons or coins, which could clogthe drain.
Only available on certain models: pull outthe corrugated hose, remove the stopperand drain the water into a container.
Ensure all the water has been emptiedfrom the drum.
Before unscrewing the filter, werecommend you place an absorbent clothunder it to keep the floor dry. A smallamount of water will come out of the filteras you remove it - this is normal.
Turn the filter counter-clockwise to thelimit stop.
Remove and clean the filter; whenfinished, replace it turning it clockwise. Thefilter handle will be locked when it is notpossible to turn any further and the handleis horizontal. Smearing a small amount ofliquid soap on the filter seal will helprefitting.
Repeat the previous steps in reverseorder to reassemble all parts.
Should the washing machine be stored inan unheated room for a long period of time,drain all water from tubes.
Unplug the washing machine.
Detach the tube from the drainagesystem and clip on the rear of the machineand lower it, fully draining water into abowl.
Secure the drain tube with the drainagesystem and clip on the rear of the machinewhen finished.
Keep the door glass and gasket clean.
14
5. QUICK USER GUIDEThis washing machine automatically adjusts the level of the water to the type and quantity of washing. This system gives a reduction in energy consumption and a saving in washing times.
Turn on the washing machine and selectthe required program.
Adjust the washing temperature ifnecessary and press the required "option"buttons.
Press the START/PAUSE button to startwashing.
At the end of the programme, themessage "End" will appear on the displayor, on some models, all wash stageindicator lights will turn on.
Turn off the washing machine.
For any type of wash, see the program table and follow the operating sequence as indicated.
Water pressure: min 0.05 Mpa / max 0.8 Mpa (0.05 MPa dispenses approximately 1 litre of water in 10 seconds)
Spin r.p.m.: See rating plate.
Power input / Power current fuse amp / Supply voltage: See rating plate.
6. CONTROLS ANDPROGRAMS
A Programme selector with OFF position
B START/PAUSE button C DELAY START button D DRYING SELECTION button E RAPID / STAIN LEVEL button F TEMPERATURE SELECTION
button G SPIN SPEED button
F+G KEY LOCK
H Digital display
I DRYING SELECTION indicator lights
L DOOR LOCKED indicator light
M KG LOAD indicator light
N KEY LOCK indicator light
O TEMPERATURE SELECTION indicator lights
P SPIN SPEED indicator lights
A
I LMNO P
H
D C E F G B
15
Press the START/PAUSE button to startthe selected cycle.
Once a programme is selected theprogramme selector remains stationary onthe selected programme till cycle ends.
"End" will appear in the display at theend of the program and the DOORLOCKED light will go off, it is now possibleto open the door.
Switch off the washing machine byturning the selector to OFF.
Press to start the selected cycle.
ADD OR REMOVE ITEMS AFTER THE PROGRAMMES HAS STARTED (PAUSE)
Press and hold the START/PAUSEbutton for about 2 seconds (someindicator light and the time remainingindicator will flash, showing that themachine has been paused).
Wait until the DOOR LOCKED light hasgone out before opening the door.
After you have added or removed items,close the door and press theSTART/PAUSE button (the programmewill start from where it left off).
CANCELLING THE PROGRAMME
To cancel the programme, set theselector to the OFF position.
Wait 2 minutes until the safety deviceunlocks the door.
This button allows you to pre-programmethe wash cycle to delay the start of thecycle for up to 24 hours.
To delay the start use the followingprocedure:
- Select the required programme.
16
- Press the delay start button once toactivate it (h00 appears on the display)and then press it again to set a 1 hourdelay (h01 appears on the display). Thepre-set delay increases by 1 hour eachtime the button is pressed, until h24appears on the display, at which pointpressing the button again will reset thedelay start to zero.
- Confirm by pressing the START/PAUSEbutton. The delay countdown will beginand when it has finished the programmewill start automatically.
It is possible to cancel the delay start byturning the programme selector to OFF.
If there is any break in the power supply while the machine is operating, a special memory stores the selected programme and, when the power is restored, it continues where it left OFF.
For automatic washing/drying cycle:after the selection of washing programmeaccording to laundry type, select a degreeof dryness by pressing this button. At theend of the washing programme, theselected drying cycle will startautomatically.
If a washing programme is not compatible with automatic drying selected, this function will not be activated.
If you want delete the selection beforethe programme starts, please pressrepeatedly the button until the lights go offor reposition the programme selector to theOFF position.
Drying only cycle:select via the knob the desired dryingprogramme in conjunction with yourfabrics, by pressing this button it is possibleto select a degree of dryness that isdifferent to the default one (except for thewool drying programme).
To cancel the cycle during the dryingphase, please press the button for about 3seconds.
"End" will appear in the display at theend of the program and the DOORLOCKED light will go off, it is now possibleto open the door.
17
This button allows you to choose between two different options, depending on the selected programme.
- RAPID
The button becomes active when youselect the RAPID (14/30/44 Min.)programme on the knob and allows you toselect one of three durations indicated.
- STAIN LEVEL button
Once the programme has been selectedthe wash time set for that programme willbe automatically shown.
This option allows you to choose between3 levels of wash intensity modifying thelength of the programme, depending onhow much the fabrics are soiled (can onlybe used on some programmes as shown inthe table of programmes).
This button allows you to change thetemperature of the wash cycles.
It is not possible to raise the temperatureover the maximum allowed for theprogramme, in order to protect the fabrics.
If you want carry out a cold wash all theindicators must be off.
By pressing this button, it is possible toreduce the maximum speed, and if youwish, the spin cycle can be cancelled.
If the label does not indicate specificinformation, it is possible to use themaximum spin expected in the program.
To reactivate the spin cycle press thebutton until you reach the spin speed youwould like to set.
It is possible to modify the spin speedwithout pausing the machine.
Pressing simultaneously the buttonsTEMPERATURE SELECTION and SPINSPEED for about 3 seconds, the machineallows you to lock the keys. In this way, youcan avoid making accidental or unwantedchanges if a button on the display ispressed accidently during a cycle.
The key lock can be simply cancelled bypressing the two buttons simultaneouslyagain or turning off the appliance.
18
The display’s indicator system allows you to be constantly informed about the status of the machine.
1) DRYING SELECTION INDICATOR LIGHTS
The indicators display the degrees of dryness that can be selected by the relevant button:
EXTRA DRY (suitable for towels, bathrobes and bulky loads).
IRON DRY (that leaves the laundry ready for ironing).
CUPBOARD DRY (for items that will be put away without ironing).
2) CYCLE DURATION
When a programme is selected thedisplay automatically shows the typicalcycle duration, which can vary, dependingon the options selected.
During the initial filling phase of the cyclethe machine calculates the actual cycletime needed based on the load size,content and options selected. The real timeof the wash will then be displayed. Thistime can recaulculate during the washdepending on detergent levels and loadbalancing.
3) DOOR LOCKED INDICATOR LIGHT
The indicator light is illuminated when thedoor is fully closed.
When START/PAUSE is pressed onthe machine with the door closed, theindicator will flash momentarily and thenilluminate.
Wait until the DOOR LOCKED light hasgone out before opening the door.
4) Kg LOAD INDICATOR LIGHT (functionactive only on certain programmes)
During the first minutes of the cycle, the"Kg LOAD" indicator will remain on whilethe intelligent sensor will weigh the laundryand adjust the cycle time, water andelectricity consumption accordingly.
Through every wash phase "Kg LOAD"allows to monitor information on the washload in the drum and in the first minutes of thewash it:
- adjusts the amount of water required;
- determines the length of the wash cycle;
- controls rinsing according to the type offabric selected to be washed it;
1 2 3 4 6 7
5
19
- adjusts the rhythm of drum rotation for the type of fabric being washed;
- recognises the presence of too much soap suds, and if necessary, adjust the amount of rinse water.
- adjusts the spin speed according to the load, thus avoiding any imbalance.
5) KEY LOCK INDICATOR LIGHT
The indicator light show that the keys are locked.
6) WASH TEMPERATURE INDICATOR LIGHTS
This shows the washing temperature of the selected programme that can be changed (where allowed) by the relevant button. If you want carry out a cold wash all the indicators must be off.
7) SPIN SPEED INDICATOR LIGHTS
This shows the spin speed of the selected programme, that can be reduced or omitted by the relevant button.
20
(MAX.) *
(see control panel)
1)1
2 PROGRAMME
(MAX.) 2 1
Whites 2) 4)
6 6 7 8 8 9 90°
Cotton + Prewash 2) 4)
6 6 7 8 8 9 60°
Cotton ** 2) 4)
6 6 7 8 8 9 60°
Eco 20°C 4)
6 6 7 8 8 9 20°
Mixed 2) 4)
3 3 3,5 4 4 4,5 60°
Delicates 2 2 2,5 2,5 2,5 2,5 40°
Rinse - - - - - - -
Spin - - - - - - -
Drain - - - - - - -
14' 1 1 1 1,5 1,5 1,5 30°
Rapid 3) 4)
30' 2 2 2,5 2,5 2,5 2,5 30° 14'- 30'- 44'
3 3 3,5 3,5 3,5 3,5 40° 44'
Shirts 4)
3 3 3,5 4 4 4,5 30°
Wool 1 1 1 2 2 2 40°
Handwash 1 1 1 2 2 2 30°
Low Dry 3 3 3,5 4 4 4,5 -
High Dry 4 5 5 5 6 6 -
21
Please read these notes: * Maximum load capacity of dry clothes,
according to the model used (see control panel).
1) When a programme is selected, onthe display is shown the displayshows the recommended washtemperature that can be reduced(where allowed) by the relevantbutton.
2) For the programmes shown youcan adjust the duration andintensity of the wash using theSTAIN LEVEL button.
3) Selecting the RAPID program onthe knob, it will be possible to selectwith the RAPID button, one of thethree rapid programs availableamong 14’, 30’ and 44’.
4) Programmes for automatic drying.
Use the programme ** with the maximum degree of soiling selected, maximum spin speed and a temperature of 60°C. Programme recommended also for test with a lower temperature.
First drying with A kg (a load consist: pillowcases and hand-towels) selecting
Second drying with B kg (a load consist:
Capacity (washing)
(kg)
A (kg) B (kg)
First drying
Second drying
6 4 2
6 5 1
7 5 2
8 5 3
8 6 2
9 6 3
22
To clean different types of fabrics and various levels of dirt, the washing machine has specific programs to meet every need of washing (see table of programmes).
WASHING
Whites An intensive wash. The final spin at maximum speed gives more efficient removal.
Cotton + Prewash This programme has been designed to remove the stronger stains from cotton white clothes. The prewash guarantees the tough dirt removal. Add into compartment "1" a quantity of detergent equal to 20% of that used for main wash.
Cotton This program is suitable to clean normally soiled cotton laundry and it is the most efficient program in terms of combined energy and water consumptions for washing cotton laundry.
Eco 20°C This innovative programme, allows you to wash different fabrics and colours together, such as cottons, synthetics and mixed fabrics at only 20°C and provides an excellent cleaning performance. Consumption on this program is about 40% of a conventional 40°C. cottons wash.
Mixed The washing and rinsing optimise the speed and rhythm of the drum action and water levels. The gentle spin, ensures a reduced formation of creases in the fabric.
Rinse This program performs 3 rinses with an intermediate spin (which can be reduced or excluded by using the appropriate button) . It is used for rinsing any type of fabric, for example after a wash carried out by hand.
Spin The programme carries out a maximum spin. It is possible to delete or reduce the spin with the SPIN SPEED button.
Drain This programme drains out the water.
Rapid (14'-30'-44') Washing cycle suggested for low loads and slightly dirty. With this program it is recommended to reduce the quantity of detergent normally used, in order to avoid unnecessary waste. Selecting the RAPID program and acting on the button you can choose one of three programs available.
Shirts The washing cycle is optimized to reduce the creation of creases, keeping an excellent washing performance. It is also possible to further reduce the spin speed, to ensure an easier ironing.
Wool This program performs a wash cycle dedicated to the wool fabrics that can be washed in a washing machine, or the articles to be washed by hand.
Handwash Program for hand wash only clothes, the program ends with 3 rinses and a slow spin.
Delicates This program has reduced periods of drum rotation during the cycle and is particularly suitable or washing delicate fabrics. The wash cycle and rinses are carried out with a high level of water to ensure the best
23
performance.
24
DRYING
The drum changes direction during the drying cycle to prevent the laundry from tangling and producing even more drying.
Cool air is used during the last 10/20 minutes of the drying cycle to minimize creasing.
Mixed (Low Dry) Low temperature drying programme recommended for synthetics and mixed fibres (always refer to the laundry care label).
Cottons (High Dry) High temperature drying programme recommended for cottons and linen items (always refer to the laundry care label).
25
7. DRYING CYCLE Drying guidance advice is general, but
practical experience of using the productwill help you to achieve the best dryingresults.
We recommend setting a lower dryingtime than indicated, when first using theappliance in order to establish the degreeof dryness required.
We recommend not drying fabrics thatfray easily, such as rugs or garments witha deep pile, in order to avoid air ductclogging.
We recommend that you sort the laundryby the following methods:
- By drying care symbols, which aredisplayed on the clothing labels
Suitable for tumble drying.
Tumble dry at high temperature.
Tumble dry at low temperature only.
DO NOT tumble dry.
- By size and thicknessWhenever the wash load is bigger thanthe drying capacity, separate the clothesaccording to thickness (e.g. towels fromthin underwear).
- By fabric typeCottons/linen: towels, cotton jersey, bedand table linen.Synthetics: blouses, shirts, overalls, etc.made of polyester or polyamide, as wellas for cotton/synthetic mixes.
Only dry pre-spun laundry.
Open the door.
Fill with the laundry, not exceeding themaximum drying load indicated in theprogramme table. For large items (e.g.sheets) or very absorbent items (e.g.towels or jeans), it is a good idea to reducethe load.
Close the door.
Turn the programme dial to the moresuitable drying programme for your laundry.
The washer dryer can perform thefollowing types of drying:
- Low temperature drying programmerecommended for mixed fabrics (synthetics/cotton) synthetic fabrics.
- High temperature drying programmerecommended for cotton, terry toweling,linen, hemp fabrics, etc...
Select the degree of dryness that yourequire:
EXTRA DRY (suitable for towels, bathrobes and bulky loads).
IRON DRY (that leaves the laundry ready for ironing).
CUPBOARD DRY (for items that will be put away without ironing).
26
The washer dryer will calculate the timeneeded for drying and the level of moistureremaining in the laundry, according to theload and drying type selected.
Check that the tap is turned on and thatthe discharge hose is positioned correctly.
Press the START/PAUSE button (thedisplay will show the drying time remaining).
When the programme is finished the word"End" will appear on the display. After5 minutes the appliance will go intostandby mode (on certain models, thedisplay will show two lines).
Switch off the machine by turning theprogramme selector to the OFF position.
Open the door and remove the laundry.
Turn off the tap.
CANCELLING THE DRYING PROGRAMME
To cancel the drying programme, pressand hold the DRYING SELECTION buttonfor about 3 seconds.
In order to ensure the correct operation of the appliance, it is advisable not to interrupt the drying phase unless it is absolutely necessary.
After cancelling the drying programme, the cool down phase will begin and you must wait for about 10/20 minutes before opening the door.
27
8. AUTOMATIC WASHING/DRYING CYCLE
- Washing Open the drawer and put in the correct
amount of detergent. Refer to the list of washing programmes
for the fabrics to be washed (e.g. very dirty cotton) and turn the selector knob to the required programme.
Adjust the wash temperature if
necessary.
Press the option buttons (if required).
Check that the tap is turned on and that
the discharge hose is positioned correctly.
- Drying Select the degree of dryness that you
require:
EXTRA DRY (suitable for towels, bathrobes and bulky loads).
IRON DRY
(that leaves the laundry ready for ironing).
CUPBOARD DRY
(for items that will be put away
without ironing).
Press the START/PAUSE button.
At the end of the wash phase the display
will show the drying time remaining.
When the programme is finished the word "End" will appear on the display. After 5 minutes the appliance will go into standby mode (on certain models, the display will show two lines).
Switch off the machine by turning the
programme selector to the OFF position.
Open the door and remove the laundry.
Turn off the tap.
CANCELLING THE DRYING PROGRAMME
To cancel the drying programme, press and hold the DRYING SELECTION button for about 3 seconds.
In order to ensure the correct operation of the appliance, it is advisable not to interrupt the drying phase unless it is absolutely necessary.
After cancelling the drying programme, the cool down phase will begin and you must wait for about 10/20 minutes before opening the door.
28
9. THROUBLESHOOTING AND WARRANTY If you believe the washing machine is not working correctly, consult the quick guide provided below which includes some practical tips on how to fix the most common problems.
ERROR CODE FORMAT
Error shown Possible causes and practical solutions
E2 (with display) 2 flashes of the LEDs (without display)
The machine cannot load water.
Make sure the water supply tap is open.
Make sure the water supply hose isn’t bent, kinked or trapped.
Make sure the drain pipe is at the proper height (see installation section).
Close the water supply tap, unscrew the filler hose from the back of the washing machine and make sure the “anti-sand” filter is clean and not blocked.
E3 (with display) 3 flashes of the LEDs (without display)
The washing machine does not drain water.
Make sure the filter is not clogged. Make sure the drain hose isn’t bent, kinked or trapped. Make sure the home drainage system is not blocked and is allowing water to flow through without obstruction. Try to drain the water in the sink.
E4 (with display) 4 flashes of the LEDs (without display)
There is too much foam and/or water.
Ensure the correct amount of detergent is being used and the detergent is designed for use in a washing machine.
E7 (with display) 7 flashes of the LEDs (without display)
Door problem.
Make sure the door is correctly closed. Make sure the clothes inside the drum are not preventing the door from closing fully. If the door is locked, turn off and unplug the washing machine from the electrical supply socket, wait 2-3 minutes and reopen the door.
Any other code Turn off and unplug the washing machine, wait a minute. Turn on the machine and restart a program. If the error occurs again contact an Authorised Customer Service Centre directly.
29
OTHER ANOMALIES
Problem Possible causes and practical solutions
The washing machine does not work / start
Make sure the product is plugged into a working supply socket. Make sure power is on. Make sure the wall socket is working, testing it with another appliance such as a lamp. The door may not be correctly closed: open and close it again. Check whether the required program was correctly selected and the start button pressed. Make sure the washing machine is not in pause or time delay mode.
Water leaked on the floor near the washing machine
This may be due to a leak from the seal between the tap, supply hose and fill valve; in this case, replace it and tighten the hose connections correctly. Make sure the front filter is correctly closed.
The washing machine does not spin
The machine is fitted with a detection system that protects the load and product from damage if the load is not balanced before spinning. This may result in:- The machine attempts to balance the load, increasing the time of
spin. Reduction of the speed of spin to decrease vibrations and noise. The spin cycle aborting to protect the machine and load. If this is experienced remove the load de-tangle it, reload it and restart the spin program. This could be due to the fact that water has not been completely drained: wait a few minutes. If the problem persists, see Error 3 section. Some models include a "no spin" function: make sure it is not selected. Check which options are selected and their effect on the spin cycle.
Excessive detergent can impede the spin cycle, ensure the correct amount of detergent is being used.
Strong vibrations / noises are heard during the spin cycle
The washing machine may not be fully levelled: if necessary, adjust the feet as indicated in the specific section. Make sure transport screws, rubber bungs and spacer tubes were removed. Make sure there are no foreign objects inside the drum (coins, hinges, buttons, etc…).
30
The use of ecological detergents without phosphates may cause the following effects:
- cloudier rinse drain water: This effect istied to the suspended zeolites which do nothave negative effects on rinse efficiency.
- white powder (zeolites) on laundry atthe end of the wash: this is normal, thepowder is not absorbed by fabric and doesnot change its colour.To remove the zeolites, select a rinseprogramme. In the future consider usingslightly less detergent.
- foam in the water at last rinse: this doesnot necessary indicate poor rinsing.Consider using less detergent in futurewashes.
- abundant foam: This is often due to theanionic surfactants found in the detergentswhich are hard to eliminate from laundry.In this case, do not re-rinse to eliminatethese effects: it will not help at all.We suggest conducting a maintenancewash using a proprietary cleaner.
If the problem persists or if you suspect a malfunction, immediately contact an Authorised Customer Service Centre.
It is always recommended to use original spare parts, that are available at our Authorised Customer Service Centres.
The manufacturer declines all responsibility for any printing errors in the booklet included with this product. Moreover, it also reserves the right to make any changes deemed useful to its products without changing their essential characteristics.
Here For You
Here
For
You
After-sales assistance
If you continue to experience problems with your Integrated Washer Dryer, please call the Montpellier customer service helpline on: 01759 487839.
Please have all your product details available, including the model number, serial number, date of purchase, and your retailer’s details before registering a fault.
The service call cannot progress without this information.
Your 2 year Manufacturer’s guarantee
THIS DOES NOT AFFECT YOUR STATUTORY RIGHTS.Your new Montpellier appliance carries a free guarantee which protects you against the cost of repairs during the first 24 months from date of purchase provided that:
Any claim is accompanied by evidence of the model reference, model serial number and proof of purchase, such as a Sales Receipt, showing that the appliance was purchased within the 24 months prior to the date of claim.
What is not covered under the Guarantee
• Any appliance not correctly installed and operated in accordance with the manufacturer’s instructions.• Any appliance that is used for anything other than domestic purposes.• Any defect caused by accident, misuse, unauthorised modification or inexpert repair.• Cost of Call-out where a fault cannot be found with the appliance.• Cost of Call-out for work covering routine maintenance, such as, but not exclusively, cleaning of filters or
defrosting.• Cost of Call-out for work required to correct the alignment of doors following door reversal procedures
carried out by you.• Use of the appliance by anyone other than the Householder.• Use in any commercial environment.• Consumable items, such as, but not exclusively, fuses in plugs, bulbs and breakable items which require
routine replacement.• Repair costs incurred that have not been authorised by Montpellier and/or carried out by a non-approved Montpellier engineer.
YOUR GUARANTEE IS VALID ONLY IN THE UK & ROI.
To register your appliance simply complete the card in your appliance pack and return it with a stamp affixed or alternatively you can register online at www.montpellier-appliances.com/support
SERVICE HELP-LINE
Should your appliance develop a fault, please call the Montpellier customer service helpline on: 01759 487839. Please remember to have all your product details available, including the model number, serial number, date of purchase and your retailer’s details before registering a fault.
Your service call cannot progress without this information.
The symbol on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.
www.montpellier-appliances.com
Montpellier Domestic Appliances Ltd. Unit 1, Tewkesbury Retail Park, Northway Lane, Tewkesbury, Gloucestershire GL20 8JU
