3
INSTRUMENT STORAGE YEAR GUARANTEE Made in USA. LEAD-TIME All models and colors listed ship within 4-6 weeks. NOTE: To ship in 4-6 weeks, all products on a purchase order must be 6-week lead-time models or less. If any item on a purchase order is not considered a 6-week lead-time item or less, the entire order will ship at the time the longest lead-time item is available. FREIGHT CLASS– 125 CABINET PANELS • Sides, tops, shelves, bottoms, and partitions are 3/4”thick, 45# particleboard with thermofused laminate finish applied to both sides. • Back panels are 5/8” thick, 45# particleboard with thermofused laminate finish applied to both sides. • 3mm PVC edge banding is applied with hot melt glue to all visible edges. • UL GREENGUARD GOLD Certified - Product certified for low chemical emissions: ul.com/gg - UL 2818 SHELVES • Shelves utilize dado construction into side panels, back panels, and partitions. • Shelves are also supported by steel tubes bolted through side panels. SHELF LINERS • All shelves protected with replaceable textured HMPE plastic liners and replaceable ABS plastic caps through-bolted to wood shelf substrate. DOORS • Available with wood laminate doors, steel wire doors or no doors. • Laminate: 3/4” thick 45# particleboard with thermofused melamine finish applied to both sides. All edges covered with machine applied 3mm PVC edge banding with hot melt glue. • Steel Wire: Constructed of 9mm diameter steel perimeter and cross wires and 5mm diameter steel vertical wires. Durable powder coat finish applied. • All doors: Heavy duty commercial 5-knuckle hinges with hospital tips allow for up to 270 degrees of rotation. All hinges are through-bolted to panels with machine screws and cap nuts. Fully serviceable heavy-duty steel latch and hasp hardware is through-bolted to doors and panels. FOOT/ LEVELING HARDWARE • Cabinets utilize 12-gauge steel wrap around brackets with internally adjustable levelers for strength, protection, and easier installation. Cabinet can be installed in place and then leveled with minimal cabinet handling. ACOUSTIC PANELS (optional add-on) Environment-friendly material is placed at the back and the top of each compartment to help eliminate direct sound reflection while absorbing high and low frequencies. Acoustic Panels are available as an optional add-on. STEEL BAR CONSTRUCTION HEAVY DUTY LOCKS POLYETHYLENE SHELF LINERS Cabinet models with dimensions and compartment sizes are on following pages. NOTE: Doors must be included at the time of ordering as they can not be installed later. LAMINATE OPTIONS Fusion Maple Brighton Walnut Asian Night Pewter Mesh Solar Oak Wild Apple Executive Cherry London Gray Storm Gray Storm Gray Black Due to pattern scale and color variations in computer monitors and printers, we recommend you view actual samples before making surface material selections.

INSTRUMENT STORAGE - Marco Group Inc

  • Upload
    others

  • View
    2

  • Download
    0

Embed Size (px)

Citation preview

Page 1: INSTRUMENT STORAGE - Marco Group Inc

INSTRUMENT STORAGE

YEARGUARANTEEMade in USA.

LEAD-TIMEAll models and colors listed ship within 4-6 weeks. NOTE: To ship in 4-6 weeks, all products on a purchase order must be 6-week lead-time models or less. If any item on a purchase order is not considered a 6-week lead-time item or less, the entire order will ship at the time the longest lead-time item is available.

FREIGHT CLASS– 125

CABINET PANELS• Sides, tops, shelves, bottoms, and partitions are 3/4”thick, 45#

particleboard with thermofused laminate finish applied to both sides. • Back panels are 5/8” thick, 45# particleboard with thermofused laminate

finish applied to both sides. • 3mm PVC edge banding is applied with hot melt glue to all visible edges.• UL GREENGUARD GOLD Certified - Product certified for low chemical

emissions: ul.com/gg - UL 2818

SHELVES• Shelves utilize dado construction into side panels, back panels, and

partitions. • Shelves are also supported by steel tubes bolted through side panels.

SHELF LINERS• All shelves protected with replaceable textured HMPE plastic liners and

replaceable ABS plastic caps through-bolted to wood shelf substrate.

DOORS• Available with wood laminate doors, steel wire doors or no doors.• Laminate: 3/4” thick 45# particleboard with thermofused melamine finish

applied to both sides. All edges covered with machine applied 3mm PVC edge banding with hot melt glue.

• Steel Wire: Constructed of 9mm diameter steel perimeter and cross wires and 5mm diameter steel vertical wires. Durable powder coat finish applied.

• All doors: Heavy duty commercial 5-knuckle hinges with hospital tips allow for up to 270 degrees of rotation. All hinges are through-bolted to panels with machine screws and cap nuts. Fully serviceable heavy-duty steel latch and hasp hardware is through-bolted to doors and panels.

FOOT/ LEVELING HARDWARE• Cabinets utilize 12-gauge steel wrap around brackets with internally

adjustable levelers for strength, protection, and easier installation. Cabinet can be installed in place and then leveled with minimal cabinet handling.

ACOUSTIC PANELS(optional add-on)

Environment-friendly material is placed at the back and the top of each compartment to help eliminate direct sound reflection while absorbing high and low frequencies. Acoustic Panels are available as an optional add-on.

STEEL BAR CONSTRUCTION

HEAVY DUTY LOCKS

POLYETHYLENE SHELF LINERS

Cabinet models with dimensions and compartment sizes are on following pages.

NOTE: Doors must be included at the time of ordering as they can not be installed later.

LAMINATE OPTIONS

FusionMaple

BrightonWalnut

AsianNight

PewterMesh

Solar Oak

Wild Apple

ExecutiveCherry

LondonGray

StormGray

StormGray

Black

Due to pattern scale and color variations in computer monitors and printers, we recommend you view actual samples before making surface material selections.

Page 2: INSTRUMENT STORAGE - Marco Group Inc

BS102Cabinet: 27.75 x 68 x 19.25Compartment:8.125 x 13.75 x 17.125Stores: 12 Clarinets, Flutes, Piccolos or Oboes.

BS100Cabinet: 27.75 x 84 x 19.25Compartment:8.125 x 13.75 x 17.125Stores: 15 Clarinets, Flutes, Piccolos or Oboes.

BS104Cabinet: 27.75 x 36 x 19.25Compartment:8.125 x 13.75 x 17.125Stores: 6 Clarinets, Flutes, Piccolos or Oboes.

BS103Cabinet: 27.75 x 68 x 29.25Compartment:8.125 x 13.75 x 27.125Stores: 12 Clarinets, Flutes, Piccolos, Oboes, Soprano Sax or Trumpets.

BS101Cabinet: 27.75 x 84 x 29.25Compartment:8.125 x 13.75 x 27.125Stores: 15 Clarinets, Flutes, Piccolos, Oboes, Soprano Sax or Trumpets.

BS105Cabinet: 27.75 x 36 x 29.25Compartment:8.125 x 13.75 x 27.125Stores: 6 Clarinets, Flutes, Piccolos, Oboes, Soprano Sax or Trumpets.

BS113Cabinet: 27.75 x 68 x 40.25Compartment:12.75 x 13.75 x 38Stores: 8 Trombones, Bassoons, Violins, Violas, Tenor Sax, Bass Clarinets, or Alto Clarinets

BS119Cabinet: 14.75 x 68 x 40.25Compartment:12.75 x 13.75 x 38Stores: 4 Trombones, Bassoons, Violins, Violas, Tenor Sax, Bass Clarinets, or Alto Clarinets

BS111Cabinet: 27.75 x 84 x 40.25or 22 x 84 x 40.25Compartment:12.75 x 13.75 x 38 or8 x 13.75 x 38Stores: 10 Trombones, Bassoons, Violins, Violas, Tenor Sax, Bass Clarinets, or Alto Clarinets

BS115Cabinet: 27.75 x 36 x 40.25Compartment:12.75 x 13.75 x 38Stores: 4 Trombones, Bassoons, Violins, Violas, Tenor Sax, Bass Clarinets, or Alto Clarinets

BS117Cabinet: 14.75 x 84 x 40.25Compartment:12.75 x 13.75 x 38Stores: 5 Trombones, Bassoons, Violins, Violas, Tenor Sax, Bass Clarinets, or Alto Clarinets

BS112Cabinet: 27.75 x 68 x 29.25Compartment:12.75 x 13.75 x 27.125Stores: 8 Trumpets, Cornets and Alto Sax

BS118Cabinet: 14.75 x 68 x 29.25Compartment:12.75 x 13.75 x 27.125Stores: 4 Trumpets, Cornets and Alto Sax

BS114Cabinet: 27.75 x 36 x 29.25Compartment:12.75 x 13.75 x 27.125Stores: 4 Trumpets, Cornets and Alto Sax

BS110Cabinet: 27.75 x 84 x 29.25or 22 x 84 x 29.25Compartment:12.75 x 13.75 x 27.125 or8 x 13.75 x 27.125Stores: 10 Trumpets, Cornets, or Alto Sax

BS116Cabinet: 14.75 x 84 x 29.25Compartment:12.75 x 13.75 x 27.125Stores: 5 Trumpets, Cornets and Alto Sax

BS106Cabinet: 27.75 x 84 x 29.25Compartment:8.125 x 13.75 x 27.1258.125 x 46.375 x 27.125Stores: 6 Clarinets, Flutes, Piccolos, Oboes, and 3 Guitars

BS107Cabinet: 27.75 x 84 x 40.25Compartment:8.125 x 38.125 x 38Stores: 6 Guitars

BS134Cabinet: 27.75 x 68 x 29.25Compartments:8.125 x 13.75 x 27.12526 x 24.5 x 27.125Stores: 6 Clarinets, Flutes, Piccolos, Oboes, Soprano Sax or Trumpets and 1 French Horn, Alto Horn or Snare Drum.

BS130Cabinet: 27.75 x 84 x 29.25Compartments:8.125 x 13.75 x 27.12526 x 24.5 x 27.125Stores: 9 Clarinets, Flutes, Piccolos, Oboes, Soprano Sax or Trumpets and 1 French Horn, Alto Horn or Snare Drum.

BS121Cabinet: 14.75 x 36 x 40.25Compartment:12.75 x 13.75 x 38Stores: 2 Trombones, Bassoons, Violins, Violas, Tenor Sax, Bass Clarinets, or Alto Clarinets

BS133Cabinet: 27.75 x 84 x 40.25Compartments:12.75 x 13.75 x 3826 x 24.5 x 38Stores: 6 Trombones, Bassoons, Violins, Violas, Tenor Sax, Bass Clarinets, or Alto Clarinets and 1 Baritone Horn, Euphonium or Mellophone

BS120Cabinet: 14.75 x 36 x 29.25Compartment:12.75 x 13.75 x 27.125Stores: 2 Trumpets, Cornets and Alto Sax

BS132Cabinet: 27.75 x 84 x 29.25Compartments:12.75 x 13.75 x 27.12526 x 24.5 x 27.125Stores: 6 Trumpets, Cornets or Alto Sax and 1 French Horn, Alto Horn or Snare Drum.

All dimensions are listed by Width x Height x Depth in inches.

Page 3: INSTRUMENT STORAGE - Marco Group Inc

BS137Cabinet: 27.75 x 68 x 40.25Compartments:12.75 x 13.75 x 3826 x 24.5 x 38Stores: 4 Trombones, Bassoons, Violins, Violas, Tenor Sax, Bass Clarinets, or Alto Clarinets and 1 Baritone Horn, Euphonium or Mellophone

BS136Cabinet: 27.75 x 68 x 29.25Compartments:12.75 x 13.75 x 27.12526 x 24.5 x 27.125Stores: 4 Trumpets, Cornets and Alto Sax and 1 French Horn, Alto Horn or Snare Drum.

BS151Cabinet: 27.75 x 84 x 47.125Compartment:26 x 38.125 x 45Stores: 2 Bass Drums, Parade Drums, Field Drums, Snare Drums, Tri-Toms, Quads, Tubas, Sousaphones or General Storage

BS162Cabinet: 48 x 84 x 29.25Compartment:46.5 x 38.125 x 27.125Stores: Bass Drums, Parade Drums, Field Drums, Snare Drums, Tri Toms, Quads, Tubas, Sousaphones or General Storage

BS140Cabinet: 27.75 x 84 x 29.25or 22 x 84 x 29.25Compartment:26 x 24.5 x 27.125 or20.25 x 24.5 x 27.125Stores: 3 French Horns, Alto Horns or Snare Drums

BS142Cabinet: 27.75 x 36 x 29.25Compartment:26 x 24.5 x 27.125Stores: 1 French Horn, Alto Horn or Snare Drum

BS141Cabinet: 27.75 x 84 x 40.25or 22 x 84 x 40.25Compartment:26 x 24.5 x 38 or20.25 x 24.5 x 38Stores: 3 Baritones, Euphoniums or Mellophones

BS143Cabinet: 27.75 x 36 x 40.25Compartment:26 x 24.5 x 38Stores: 1 Baritone, Euphonium or Mellophone

BS150Cabinet: 27.75 x 84 x 40.25or 22 x 84 x 40.25Compartment:26 x 38.125 x 38 or20.25 x 38.125 x 38Stores: 2 Bass Drums, Parade Drums, Field Drums or Snare Drums

BS160Cabinet: 48 x 84 x 29.25Compartment:46.5 x 24.5 x 27.125Stores: Baritone Sax, Bass Clarinet, Field Drum, Snare Drum, Bassoon or General Storage

BS170Cabinet: 60 x 84 x 40.25Compartment:58.25 x 78.75 x 38Assembly is required.Stores: Timpani, Chimes, Small Vibe, Xylophone, Marimba or Gong

BS190Cabinet: 48 x 84 x 48Compartment:46.5 x 78.75 x 27.125Assembly is required.Stores: Miscellaneous Instruments or General Storage

BS156Cabinet: 27.75 x 84 x 29.25or 22 x 84 x 29.25Compartment:26 x 65.5 x 27.125 or20.25 x 65.5 x 27.125Stores: Cello or Guitar

BS155Cabinet: 27.75 x 84 x 29.25or 22 x 84 x 29.25Compartment:26 x 78.75 x 27.125 or20.25 x 78.75 x 27.125Stores: String Bass, Contra Bass or Clarinets

BS158Cabinet: 14.75 x 84 x 29.25Compartment:12.75 x 65.5 x 27.125Stores: 1 Cello or Guitar

BS157Cabinet: 14.75 x 84 x 29.25Compartment:12.75 x 78.75 x 27.125Stores: 1 String Bass or Contra Bass Clarinet

BS171Cabinet: 60 x 84 x 40.25Compartment:58.25 x 78.75 x 38Assembly is required.Stores: Bass, Cellos, Guitars, Guitarrons, Violins, Violas or Vihuelas

Marco Group Inc. | 5400 Doniphan Drive, Neosho, MO 64850 | 888-627-2601 | www.marcogroupinc.com

All dimensions are listed by Width x Height x Depth in inches.