Instrument Eng Should Know

  • Upload
    etheque

  • View
    215

  • Download
    0

Embed Size (px)

Citation preview

  • 8/6/2019 Instrument Eng Should Know

    1/5

    What an instrument engineer should know?Posted on | March 11, 2010 | 2 Comments

    A. Instrument Specifications

    - Allocation Gas Metering Specification

    - Automation System Network Spec

    - Control Panel, Cabinet and Rack Specification

    - Control Valve Specification

    - Fusible Plug Panel Specification

    - General Instrument Design

    - HSSD Specification

    - Instrument / Telecom cable Specification

    - Instrumentation & Control Section of The Basis of Design

    - MCS, PSD, & ESD System Specification

    - Specification for Pressure Safety and Relief Valves

    - Specification for Shutdown Valves & Blowdown Valves and Actuator Assemblies

    - Typical System Functional Design Spec.

    - Wellhead Control Panel Specification

    B. Instrument Philosophies

    - Automation System Philosophy

    - Automation System Reset & Override Philosophy

    - Fire and Gas Philosophy

    - Instrument Earthing Philosophy

    - Shutdown Philosophy

    C. Documents Related To Automation System

    - Fire & Gas Cause / ESD and Effect Chart

    - Serial Link Data Listings and Addresses Allocation Gas Meter, Chemical Injection, Wet Gas Meter,

    Fire Water Pump, Glycol Reboiler, MV SWGR, Fire Water Pump

    - Graphic for F&G, MCS, PSD/ESD (Review)

    Object1

    http://instrumentation.web.id/?p=12http://instrumentation.web.id/?p=12#commentshttp://instrumentation.web.id/?p=12#commentshttp://instrumentation.web.id/?p=12
  • 8/6/2019 Instrument Eng Should Know

    2/5

    - Instrument Cable Block Diagram-MCS, PSD/ESD, TCS

    - Instrument Logic Diagram for Actuated Valve, ESD/PSD, F&G, Pump & Fan Motor, MCS, TCS

    - Instrument loop safety integrity level listing (SIL).

    - Logic sequence flow step charts.

    - Master Alarm & Trip Schedule

    - Network Architecture (Review)

    - PSD/ESD Cause and Effect Chart

    - Serial Link Data Listings and Addresses

    - Shutdown Hierarchy (Shutdown flow block diagram identifying each level and causes & effects)

    - Instrument I/O List MCS, PSD, ESD, F&G, TCS

    - Instrument & Automation Equipment List

    D. Miscellaneous Documents

    - Instrument Installation, testing, Pre-Commissioning, and Commissioning- Instrumentations Tools

    - Intruder and CCTV management

    - Laboratory Equipment List

    - List of Test Equipmets

    E. Instrument Calculations

    - Calculation of Actuator sizing.

    - Calculation of Control valve sizing and noise.

    - Calculation of Flowmeter sizing.

    - Calculation of Heat dissipation.

    - Calculation of Hydraulic tank, pumps and accumulator sizing calculations.

    - Calculation of Instrument power cable sizing calculations.

    - Calculation of Instrument utilities consumption.

    - Calculation of Relief valve sizing and noise.

    - Calculation of Restriction orifice sizing and stress and noise.

    - Calculation of Thermowell and other insertion device stress and wake frequency.

    - Calculation of Tubing sizing calculations (Hydraulic)

    - Calculation of Valve speed calculations (where required)

    F. Instrument Datasheets

    - Datasheet of Actuated Ball Valves

    - Datasheet of Actuated ON/OFF Valves

    - Datasheet of Annubar Flow Meter

  • 8/6/2019 Instrument Eng Should Know

    3/5

    - Datasheet of Anti-Surge Control Valve

    - Datasheet of Bubble Type Level Transmitters

    - Datasheet of Choke Valves

    - Datasheet of Control Valves

    - Datasheet of Coriolis Flow Meter

    - Datasheet of Deluge Valves

    - Datasheet of Dew Poin Analyser

    - Datasheet of Differential Pressure Indicating Transmitters

    - Datasheet of Differential Pressure Indicators

    - Datasheet of Displacer Level Transmitters

    - Datasheet of Duplex RTD

    - Datasheet of Electrical Hand Switches

    - Datasheet of Flanged Thermowells- Datasheet of Flow Meter (Ultrasonic)

    - Datasheet of Flow Switch

    - Datasheet of Gas Analyzer Chromatograph

    - Datasheet of Guide Wave Radar Level Transmitters

    - Datasheet of H2 Detectors

    - Datasheet of HC Gas Detectors (Open Path)

    - Datasheet of HC Gas Detectors (Point)

    - Datasheet of Heat Detectors

    - Datasheet of Infra Red Flame Detectors

    - Datasheet of Intruder Detectors

    - Datasheet of Junior/Senior Flow Elements

    - Datasheet of Magnetic Flow Meter

    - Datasheet of Magnetic Level Gauge

    - Datasheet of Magnetostrictive Level Transmitters

    - Datasheet of Moisture Analyser

    - Datasheet of Orifice Flow Element

    - Datasheet of Pig Indicators

    - Datasheet of Pig Signaller Intrusive

    - Datasheet of Pneumatic Pressure Pilot

    - Datasheet of Pressure Indicating Transmitters

    - Datasheet of Pressure Indicator

  • 8/6/2019 Instrument Eng Should Know

    4/5

  • 8/6/2019 Instrument Eng Should Know

    5/5

    I. Instrument Material Take Off

    - MTO Cable Glands

    - MTO Earthing Devices

    - MTO Fusible Plugs

    - MTO Installation Support

    - MTO Instrument & Telecom Cable

    - MTO Instrument Cable & Tubing Tray

    - MTO Instrument Cable Accessories

    - MTO Instrument Cable Ladder & Tubing Tray

    - MTO Instrument Distribution Manifold

    - MTO Instrument Fittings

    - MTO Instrument Junction Box

    - MTO Instrument Manual Valves- MTO Instrument Tubing

    - MTO Multiple Cable Transit (MCT)

    J. Instrument Schedules

    - Instrument Cables Schedule

    - Instrument Index

    - Instrument Junction Box Schedule

    - Hazardous Area Equipment Schedule