Instructions for installing the crack files for MAC ***Before installing this program make sure all other running programs (internet, itunes, etc) are CLOSED*** 1. Put in the set up disc 2. You will see a folder for Windows and Mac

3. Click on the “MAC” Folder

4. There will be 3 files inside

5. Open it 6. Open up “Rosetta Stone Setup.dmg”

7. Wait for file to open (see above pic)

8. Open “Rosetta Stone Version 3.pkg”

9. Rosetta Stone Version 3 Installer will come on screen – click on “Continue”

10. Click “Continue” again on Software License Agreement

11. Select a Destination Screen will come up – Click “Continue”

12. Standard Install on “Macintosh HD” will come next --- Click “Install”

13. Installation will be completed successfully --- Click “Close”

14. Go to the Setup Disc and open “Rosetta Setup for MAC”

15. Open “Crack” Folder

16. Press Ctrl + Click on “mdm.dat” icon

17. Select “Copy mdm.dat” option 18. Close setup disc window

19. Go to Applications folder on your computer 20. Find Rosetta Stone icon (see pic above with red square) ----- Press Ctrl + Click

21. Select “Show Package Contents” from menu

22. Open “Contents” folder

23. Highlight “Resources” file --- Press Ctrl + Click

24. Select “Paste Item” from menu

25. Copy box will pop up --- Click Replace

26. Close all windows 27. Eject Setup Disc 28. Select Language Level (example: Spanish Level 1) and insert into computer 29. Go to Rosetta Stone in “Applications” 30. Open Rosetta Stone

31. As program opens, menu pops up (see pic above) 32. Select “Add A Language Level”

33. Select “Install Selected Language Level”

34. The above menu will pop up --- Click “Accept” 35. Language Level will load – This may take 3 – 10min depending on the age and speed of your computer

36. After language level has been loaded successfully installed, you can repeat steps 31 – 35 if you want to install the rest of your language levels. Otherwise ---- Click “Continue”

37. The program will automatically try to update (see above) – ALWAYS click “Check Later” ****VERY IMPORTANT****

38. The program will then let you know that the program is currently unregistered – ALWAYS click “Register Later” ***VERY IMPORTANT****

39. Enter your name or the user’s name in the box under “Create a user”. 40. Select Gender 41. If you are under 14 yrs old, check the box that says “Under 14?”

42. Select “Full Year Curriculum” 43. Click “Apply Changes”

44. You have now created a User and opened the program successfully. When above menu appears ---- Click “Start”

45. The above menu will pop up, just close it by hitting the big red “X” in the upper right hand corner

46. When above menu pops up, click the center of the screen with your mouse until several boxes line all the way across the screen (see next image)

47. When your screen looks like the screen above, you can now start learning a new language. 48. Click on the red diamond on the far left of the screen (circled in blue)

49. Every time you start the program, you will have to select your microphone (if your mac is older, and you don’t have a mic you may need to purchase one for $10 - $15 **MOST LAPTOPS HAVE ONE BUILT-IN**) 50. Select mic from list --- click “Continue”

51. Setup box will appear (see above) – Click “Continue” 52. You will then have to speak “1, 2, 3, 4, 5” to the computer (use your regular speaking voice – don’t shout at your computer)

53. Microphone setup will be successful – Click “Continue”

HELPFUL HINT ***If mic setup does not go well, go to preferences on your computer by hitting the apple in the upper left hand corner of your computer, select “system preferences” from the drop down menu and go to “Sound” – there you can see if you have a mic and if it’s installed correctly or if it’s muted, etc. You want to have the “input volume” at about the half way point. If it is all the way up it will not properly hear your voice. Also click the “ambient noise reduction” box.

54. If you would like to install more language levels, you can always go to the upper right hand corner of your home screen (screen with lots of tiny boxes across the screen and select it from the far right icon of the 3 (looks like 3 dashes – see below) – But FIRST, insert a language level disc.

55. Select “Add a Language Level” (or if you would like to remove one, select “Remove a Language Level”

56. Click Continue after inserting a language level disc ---- Click “Continue” (if you get an error message, allow more time for computer to read disc – there is a lot of info on the disc so it may take a minute. Then repeat step 55 until it sees your disc --- if you are successful, you will see the window below)