10-inch touchscreen in-dashconcept usa inc.152 s brent circlewalnut, ca 91789www.conceptbuy.com1-888-830-1788

Instruction Manual

Concept xL-10

contents1. Specification comparison

2. Cables

3. apple carplay & android auto

4. Bluetooth Instruction

5. backup camera

warning:do not watch or play games while driving. Warnings must be followed to avoid serious bodily injury.

Backup Cameraconnecting camera to in-dash receiver

5

Power harness: • connect the brown wire (reverse trigger) to a power source.

power harness

rear camerainput

camera example(not included)

rear camera input: • connect the male rca to the female rca video output. • brown wire (trigger wire).

reverse trigger

brake wire

note: power steering wheel uses key-1 and key-2 wire.

4

Concept x - Specification comparison

panel size (1080p)

single din

android version

car play

android auto

mirror link

swivels

dsp

app store

x-8010.1’’ 10.1’’ 10.1’’

8.1 6.1

x-60 xl-10

1

Bluetooth instruction connecting phone to in-dash receiver (bluetooth)

phone: • tap on “Settings”. • tap on “bluetooth”. • turn on bluetooth. • pair to CAR-KIT. • enter 0000.

In-dash receiver: • open “bluetooth” app. • note the device name and pin code.

note: different model of in-dash receivers will be slightly different.

av cable

rear camerainput

Concept xL-10 - cables

2 13

USBpower

harness

Apply carplay / android auto instruction

apple phones • connect the apple charging cable from phone to the carplay usb port.

android phones • tap on “play store”. • download and install “android auto”. • connect the android charging cable from phone to the android usb port.

apple carplayAndroid auto

power steering wheel control • uses key-1 and key-2 wire • some vehicle require an interface to work with the pwc (power steering control)

apple carplayAndroid auto