Instruction Manual

Bluetooth® Wireless MouseSMBT14

ContentsSafety Warnings .............................................................................. 4Unpacking ....................................................................................... 6Product Overview ........................................................................... 7

Top View ...............................................................................................................7Bottom View .......................................................................................................7

System Requirements .................................................................... 8Installing the Batteries ................................................................... 8Basic Operation .............................................................................. 9

Powering On/Off ...............................................................................................9Selecting Mode..................................................................................................9Selecting DPI (Dot per Inch)..........................................................................9

Connecting in 2.4GHz Wireless Mode ......................................... 10Automatic Pairing ...........................................................................................10Manual Pairing .................................................................................................11

Connecting in Bluetooth® Mode ................................................. 12Hints and Tips................................................................................ 13Specifications ................................................................................ 14

4

Safety Warnings

Optical:Never point the optical sensor towards the face, particularly the eyes, to avoid possible injury.

While the mouse is in use, the optical light is visible to the naked eye. Be careful not to look directly into the emitter hole while the mouse is active.

Wireless Devices:• Before boarding any aircraft or packing a wireless

device in luggage that will be checked in, remove the batteries from the wireless device.

• Wireless devices can transmit radio frequency (RF) energy, whenever batteries are installed and the wireless device is turned on.

Battery-Powered Devices:• Improper use of batteries may result in battery fluid

leakage, overheating, or explosion.• Leaked battery fluid is corrosive and may be toxic.

It can cause skin and eye burns, and is harmful if swallowed.

5

To Reduce the Risk of Injury:• Keep batteries out of the reach of children.• Do not heat, open, puncture, mutilate, or dispose of

batteries in fire.• Do not mix new and old batteries or batteries of

different types.• Do not allow metal objects to touch the battery

terminals on the device; they can become hot and cause burns.

6

Thank you for purchasing your new Mouse.We recommend that you spend some time reading this instruction manual in order that you fully understand all the operational features it offers. You will also find some hints and tips to help you resolve any issues.Read all the safety instructions carefully before use and keep this instruction manual for future reference.

UnpackingRemove all items from the packaging. Retain the packaging. If you dispose of it please do so according to local regulations.The following items are included:• Main Unit • Nano Dongle• AA Size Battery x 1• Instruction Manual

7

Product Overview

Top View

Bottom View

DPI

Right Mouse ButtonScroll Wheel

LED indicator - highlights which operating mode you are in (Wi-Fi or Bluetooth) and highlights the DPI settings.

DPI Button, also changes between Wireless and Bluetooth modes.

Left Mouse Button

Forward/ Next Page Button

Backward/ Previous Page Button

BLUE Button, for pairing your mouse.

USB Dongle

ON/OFF Switch

Battery Compartment

and Dongle Storage

ON OFF

8

System RequirementsOperating Systems: Microsoft® Windows® 7 / 8 / 10

MAC® OS XHardware: 1 available USB port

Installing the BatteriesWhen battery is low, the LED indicator will flash.1. Lift the battery cover up.2. Insert 1 x AA battery.3. Close the battery cover.

• Please ensure the batteries’ polarities (+ / –) match the battery compartment’s polarities.

• To save energy, slide the ON/OFF switch to the OFF position to turn off the mouse.

ON OFF

9

Basic Operation

Powering On/OffSlide the ON/OFF switch at the bottom of the mouse to turn the mouse on or off.When switching on the unit, the LED indicator will light up for 2 sec in 2.4GHz Wireless mode or 5 sec in Bluetooth® mode.

Selecting ModePress and hold the DPI button for 3 sec to switch between 2.4GHz Wireless and Bluetooth® modes.When 2.4GHz Wireless mode is selected, LED indicator will light up for 2 sec. When Bluetooth® mode is selected, LED indicator will light up for 5 sec.

Selecting DPI (Dot per Inch)Press the DPI button to select sensitivity 1000 (less sensitive) or 1600 (more sensitive).If DPI 1000 is selected, the LED indicator will slow flash 3 times.If DPI 1600 is selected, the LED indicator will quick flash 5 times.

10

Connecting in 2.4GHz Wireless ModePlug the dongle directly into the USB port of your device. It will install a mouse driver (this may take a minute or two). You need both for your mouse to function properly. The USB nano dongle is location in the base of the packaging. It should be stored in the battery compartment when not in use.

Automatic Pairing1. Slide the ON/OFF switch to ON.2. Press and hold the DPI button for 3 seconds, the LED

will light up for 2 seconds.You will now be in 2.4GHz Wireless mode, the mouse will automatically activate. This could take a few seconds.

Find dongle here

Store dongle here

Insert dongle into device

11

When the drivers are installing you’ll see a symbol in the taskbar. If you click on it you’ll see the Device Setup menu, wait for the drivers to install.

Drivers installing

Manual PairingIf automatic pairing fails, pair the dongle with the mouse manually.1. Remove the dongle from device USB port.2. Slide the ON/OFF switch to ON.3. Press the BLUE button at the bottom of the mouse.

The mouse will enter the pairing mode and the LED indicator will flash quickly.

4. Plug the dongle into the USB port within 20 sec.5. After successfully connecting in 2.4GHz Wireless

mode, the LED indicator light will extinguish.

ON OFF

DPI

Blue button

LED flashes quickly

12

Connecting in Bluetooth® Mode1. You must have a Bluetooth® device to work with this

mouse. Switch on your Bluetooth® device, and make sure Bluetooth® is switched on.

2. On the mouse, slide the ON/OFF switch to ON. You now need to make sure your mouse is in Bluetooth® mode.

3. Press and hold the DPI button for 3 seconds, if the LED lights up for 5 seconds you are in Bluetooth® mode. If not press and hold the DPI button again.

4. Press and hold the BLUE button, the LED indicator light will flash, it’s now in pairing mode which will last for 120 seconds.

ON OFF

DPI

Blue button

LED flashes

5. On your device, search for a mouse with Bluetooth® technology. Select the mouse named “SMBT14”. If you are asked to enter a code, type in 0000 or 1234.

6. Your mouse is now paired with your device.

13

Hints and Tips

Mouse Not Working:• Ensure the mouse is switched on.• Move the mouse closer to the device.• If the mouse is moving erratically, change the

working surface which the mouse is operating on.• Restart the computer.• Check battery installation. Replace battery if needed.• The mouse may not work smoothly on white paper

and glass surfaces. We recommend using mouse pad.

In Bluetooth® mode:• Ensure you are in Bluetooth® mode.• Ensure your Bluetooth-enabled device’s wireless

function is active.• Ensure there are no other wireless devices in

discovery mode.• Ensure your computer’s operating system supports

wireless input devices (e.g. mice and keyboards), and is the latest version.

• Pair again the mouse and the device.

14

In Wireless mode:• Ensure you are in 2.4 GHz Wireless mode.• Make sure the Nano Dongle is plugged into a USB

port and the computer is on or try the Nano Dongle in a different USB port.

• If the Nano Receiver is plugged into a USB hub, try plugging it directly into the computer.

• If mouse performance is slow or intermittent around a wireless network, unplug the Nano Dongle from the USB port and then reinsert it. To reactivate the mouse, switch it on, off and on again using the ON/OFF switch on the bottom of the mouse.

Specifications

Model SMBT14

Wireless Frequency 2.4GHz / Bluetooth® 4.0

Operating Range 10 m

Resolution 1000 / 1600 dpi

Dimension (L) x (W) x (H)

107 x 63 x 40 mm

Features and specifications are subject to change without prior notice.

15

For general information about this appliance and handy hints and tips, please visit www.knowhow.com/knowledgebank or call 0344 561 1234.

Visit Partmaster.co.uk today for the easiest way to buy electrical spares and accessories. With over 1 million spares and accessories available we can deliver direct to your door the very next day. Visit www.partmaster.co.uk or call 0344 800 3456 (UK customers only). Calls charged at National Rate.

The symbol on the product or its packaging indicates that this product must not be disposed of with your other household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a designated collection point for the recycling of waste electrical and

electronic equipment. The separate collection and recycling of your waste equipment at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment.For more information about where you can drop off your waste for recycling, please contact your local authority, or where you purchased your product.

Notes for battery disposalThe batteries used with this product contain chemicals that are harmful to the environment.To preserve our environment, dispose of used batteries according to your local laws or regulations. Do not dispose of batteries with normal household waste.For more information, please contact the local authority or your retailer where you purchased the product.

The wireless LAN hardware in your product conforms to the requirements and provisions set out in European Directive 1999/5/EC (R&TTE). Limitations may apply for details go to www.currys.co.uk/compliance.

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth® SIG, Inc. and any use of such marks by DSG Retail Limited is under license. Other trademarks and trade names are those of their respective owners and all rights are acknowledged.

Windows is a registered trademark of Microsoft Corporation in the United States and other countries.

All trademarks are the property of their respective owners and all rights are acknowledged.

IB-SMBT14-151223V5

DSG Retail Ltd. (co. no. 504877) 1 Portal Way, London, W3 6RS, UK