LS 162e

WiFi Car DVR

Instruction Manual

| 1English

Names of Parts

Speaker

LCD Panel

Status Indicator

TripodMount

Mic

microSD Card SlotLens

GPS Receiver Slot

Power/Menu Button Record / Emergency Button

Micro USB Port

Micro HDMI Port

2 | English

Tripod Mount Strap Mount Strap

USB Cable Car Charger Car Mount

User Manual

Accessories

| 3English

Shooting a Video1. Power on: Press to turn on camcorder.

2. Record: Press to start recording. Press and then to stop.

Inserting a microSD CardBefore initial use, insert a microSD card. (suggested at least 4GB, up to 64GB)

Getting Started

microSDcard

Charging the UnitFully charge camcorder for initial use by:• Car charger • PC USB port• USB adapter (not included)During charging, screen shows battery icon or status indicator flashes in orange. When camcorder is fully charged, the indicator turns off.

4. Return to preview: Switch to [ ] to return.5. Power off: Press and hold for 2 seconds.

3. Playback:

Press to enter menu settings. Select [Playback ]. Press [Play ] to play the video and press [Stop] to stop.

Note: When using a new microSD card, foramt the card by your camcorder.

4 | English

Camcorder OperationIn preview, press to enter menu settings.

Menu Settings Descriptions

Play recorded videos

Switch between Action Cam and Dash Cam.

Enable/Disable WiFi for wireless connection

Enable/Disable internet cloud connection

Enable/Disable voice recording (Dash Cam only)

Auto REC Enable/Disable auto recording when car engine starts (Dash Cam only)

60 SECOFF Screen turns off after 60 seconds of non-

operation (Dash Cam only)

Reset to factory default settings or format SD card.

Screen Auto Off

Settings

Voice Record

WiFi - Local

Auto Record

Dash Cam

Playback

Action Cam

WiFi - Cloud

Menu SettingsCamcorder has eight menu settings. Advanced settings can be set up via mobile APP.

Button functions indicated above .Use to navigate menu

settings.

Note: After 10 seconds of non-operation in menu settings, screen returns to preview.

| 5English

Mode Action Cam Dash Cam

Record type Normal Loop Emergency

Record trigger

Record duration

Display info.

Transfer Files to PC:1. Connect camcorder to PC via Micro USB cable. 2. Find video at "My computer\Removable Disk\". 3. Copy, move, delete, and playback videos on PC.

View Camcorder Screen on TV:1. Connect camcorder to TV via Micro HDMI cable (not included). 2. Turn on camcorder. 3. Camcorder screen displays on TV simultaneously.

Camcorder has two recording modes for different applications:Action Cam: Shoot normal videos.Dash Cam: Shoot loop and emergency videos.

Record Modes

• Car impact• Press during loop recording

Press in preview

Three min. sectionsUnlimitedOne min. section

(30 seconds before and after the event)

Note: 1. During loop recording, oldest files are overwritten if microSD card is full.2. During loop recording, press to enable/disable mute fuction.

SD card remaining time Current date & time2014/01/01 21:06:36

Comparison between modes:

00:06:36

Mobile Camcorder

Local

Mobile connects to camcorder directly via WiFi for remote control, live view, album management and camcorder setup.

Mobile connects to cloud server to view live videos uploaded from internet remote camcorder.

Wireless & APP OperationBefore inital using wirless connections, download and install APP 【Blaupunkt Mobile DVR Control】 from Google Play Store and Apple Store. 【Blaupunkt Mobile DVR Control】 has two functions: (1) Local - Direct control (2) Internet - Internet live view

Blaupunkt Mobile DVR Control

【Local】(1) Local Internet

【Internet】(2) Local Internet

AP

Unieye Server

AP

3G/4G Mobile Hotspot

3G/4G Mobile Wireless Router

Wireless Router

Camcorder

AP

Mobile

Internet

6 | English

Mobile Connects to Camcorder1. For Android: Turn on [Wi-Fi]. For iOS: Go to [Settings] [Wi-Fi]. Turn on [Wi-Fi] and select the camcorder name.2. Run 【Blaupunkt Mobile DVR Control】.

3. Tap【Local】and select the camcorder to enter【Local】View Page. Tap [ ] to scan again if camcorder is not found.

Note: • Mobile cannot connect to camcorder while camcorder is recording.• For first use, password is not required. User can set camcorder password in Setup Page.

【Local】Function

iOS Settings

Local Internet

Before using mobile APP's【Local】function, ensure camcorder WiFi is on and camcorder Cloud setting is off. Once WiFi is ready, preview shows camcorder name (R2-xxxxxxxx) for few seconds.

Local View PageLocal Main Page

| 7English

8 | English

Items Descriptions

Shoot videos and files are saved into camcorder microSD card

Shoot videos or Take photos and files are saved into mobile "Album\Blaupunkt Mobile DVR Control\"

For multiple camcorders user : • Enable Quad-View for multiple live view on mobile • In Quad-View, select a window for single view.

Upside down image

Talk to camcorder from mobile

Groups Descriptions

Camcorder Settings Edit name, password. Format SD card. Adjust recording resolution, etc.

Internet Settings Edit Email and AP and save in camcorder. (For internet cloud server connection)

Car DVR Settings Set motion detector, impact sensor, etc.

View Page

Album Page (for camcorder)

Setup Page (for camcorder)

4.【Local】function has three function pages: View, Album and Setup.

Folders Descriptions

View or delete video files recorded in action cam

View or delete video files recorded in dash cam

Note: 1. In Setup Page, tap [Save] to complete settings to camcorder. 2. Mobile media player may not support SuperHD video.

| 9English

1. Go to [Setup] [ Internet Settings] Edit Email and AP

2. Tap [Save] to complete Email & AP settings.

Camcorder Internet Setup Before using internet cloud service, Email and AP must be properly set up.

Camcorder SD Card Setup

Go to [Setup] [ Camcorder Settings] Adjust slide bar and press [Format]

button to complete SD card setup.

When SD card is first-time use or reformatted in camcorder, user should allocate memory for Action Cam and Dash Cam.

Note: AP(Access Point) can be • Wireless Router or • 3G/4G Mobile Wireless Router or • 3G/4G Mobile Hotspot

APAP

AP

Wireless Router

APAP

AP

3G/4G Mobile Wireless Router

APAP

AP

3G/4G Mobile Hotspot

10 | English

Motion Detector Setup

G-Sensor Setup

When car's engine stops and motion is detected, camcorder automatically records videos till no motion is detected.

When camcorder is recording and any impacts happen, camcorder automatically records emergency events if G-Sensor is set.

1. Set Camcorder to dash cam mode.

2. Go to APP [Setup] [ Car DVR Settings] Turn on [Motion Detector] Tap [Save].

Go to APP [Setup] [ Car DVR Settings] Select [G-Sensor], [H]/[L] Tap [Save].

Note : [H] High sensitivity. [L] Low sensitivity.

3. Camcorder shows on screen.

4. When car's engine stops, operate camcorder to active [ Motion Detector].

| 11English

Camcorder Connects to Cloud ServerEnable [Cloud ] in camcorder to upload video streaming to cloud server. Connecting status will be shown on screen.

【Internet】FunctionLocal Internet

Status Descriptions

Connection successful. Preview shows [ ] and camcorder ID.

Login fail: • Invalid AP name or password • Weak WiFi signal or not in WiFi coverage

Connection fail: • No internet or cloud server is not accessible • Blocked by some firewall

Before using APP's【Internet】function, ensure camcorder internet setup has been completed.

1. Connect mobile to internet (via WiFi, 3G/4G). 2. Run【Blaupunkt Mobile DVR Control】and tap【Internet】.3. For adding camcorder or using another mobile, tap [ ] Enter the camcorder ID and password.4. Tap camcorder ID/name to view internet live videos.

【Internet】 Main Page

Remote Internet Live View

12 | English

Situation Cause/SolutionCamcorder cannot turn on Power is low. Recharge battery

Camcorder isfrozen

Press and hold button for 5 seconds to force shutdown; press again to turn on

Camcorder cannot record

• No microSD card or microSD card is full • microSD card cannot be recognized • Format microSD card or replace microSD card

Camcorder cannot connect to AP or could server

• Invalid AP name or password • Weak WiFi signal or not in WiFi coverage • No internet or cloud server is not accessible • Blocked by some firewall

Mobile cannot find camcorder

• Camcorder WiFi is disabled or not in WiFi coverage • Mobile WiFi is disabled • iOS user does not choose camcorder name in Wi-Fi Settings • Tap [Refresh] button on [Blaupunkt Mobile DVR Control]

Mobile cannot watch live view

• Weak WiFi signal• Camcorder is recording• Camcorder is occupied by other mobile

Mobile cannot connect to cloud server Check mobile 3G/4G or WiFi internet

connection

Mobile cannot watch live view The internet bandwidth is insufficient for

camcorder upload or mobile download

Forget camcorderpassword

Enter camcorder menu settings and select [Settings] [Factory Reset] to set to default.

Troubleshooting

【Internet】

【Internet】

【Local】

【Local】

| 13English

Situation Cause/SolutionCamcorder cannot turn on Power is low. Recharge battery

Camcorder isfrozen

Press and hold button for 5 seconds to force shutdown; press again to turn on

Camcorder cannot record

• No microSD card or microSD card is full • microSD card cannot be recognized • Format microSD card or replace microSD card

Camcorder cannot connect to AP or could server

• Invalid AP name or password • Weak WiFi signal or not in WiFi coverage • No internet or cloud server is not accessible • Blocked by some firewall

Mobile cannot find camcorder

• Camcorder WiFi is disabled or not in WiFi coverage • Mobile WiFi is disabled • iOS user does not choose camcorder name in Wi-Fi Settings • Tap [Refresh] button on [Blaupunkt Mobile DVR Control]

Mobile cannot watch live view

• Weak WiFi signal• Camcorder is recording• Camcorder is occupied by other mobile

Mobile cannot connect to cloud server Check mobile 3G/4G or WiFi internet

connection

Mobile cannot watch live view The internet bandwidth is insufficient for

camcorder upload or mobile download

Forget camcorderpassword

Enter camcorder menu settings and select [Settings] [Factory Reset] to set to default.

Insert GPS receiver into your device.

1. Connect camcorder to PC via standard Micro USB cable. Note: The USB cable in accessory kit is only for power supply in car. Please use other Micro USB cable for installation (ex. Android smart phone's usb cable).2. Find Setup.exe in "My computer\Removable Disk\DCIM".3. Double click Setup.exe to install/

GPS Receiver

2. Install Software to Computer

marked on the map.

1. Google Maps View

• The Start and End location of the video will be

Unieye Map Operation

1. Hardware operation

1. Take out the SD card from your device, and put it into the card reader

2. Click “Unieye Map ” and run it on your computer.3. An active Internet connection is required to use Google Maps View.

3. Software operation

of your computer.

14 | English

2. Speed Meter• Show the speed inforamtion from the records of the video.• Press to switch the scales of meter in Kilometer per hour.• Press to switch the scales of meter in Mile per hour.

3. Compass• Show the moving direction from the records of the video.

4. Calendar• Press : move to next month.• Press : move to previous month.• Press the date in the calendar, the taken videos show dates information in the 24 hours meter.• Click on color lines to view the video.

The length of video clip 60 minutes 24 hours

• Press to select your SD card. (Unieye Map only can read the video files in SD card )

• Press to adjuest the volumn of your video.• Press to forward/play/stop/backward your video.

| 15English

5. PIP Mode • In Windows mode, press to change view to Full Screen mode.• The defualt view of Full Screen mode : video in parent window, map in child window.

• In Full Screen mode, press to switch view back to Windows mode.

6. PIP Switch• Press to switch map in parent window, video in child window.• Press again to switch back.

Blaupunkt Technology GmbHRobert-Bosch-Str. 200D-31139 Hidesheìmwww.blaupunkt.com

Designed and Engineered by BlaupunktManufactured in China / Fabríque en Chíne

E13