Embed Size (px)
Citation preview
Studentská 1402/2 | 461 17 Liberec 1 | tel.: +420 485 353 006 | cxi.tul.cz
Institute for Nanomaterials, Advanced Technologies and Innovation
… where NANOSPIDERTM was born …
Adam BlazekIndustry Relations Director
Research Programs
Institute for nanomaterials, advanced technologies and innovation has ambitions to become state of
the art research center for development and innovation in these areas:
Material research
focusing on research, development, processing and applications of progressive materials,
especially nanomaterials
Competitive engineering
focusing on research, development and utilization of advanced engineering constructions andtechnologies, in particular mechatronic systems, propulsion units and other components of
machines and vehicles and progressive methods for the processing of new materials
Institute for Nanomaterials, Advanced Technologies and Innovation
Material Research
Orientation of the research program:processing and utilization of new progressive materials(in particular nanomaterials)
• Basic research activities:electrostatic spinning, preparation of various types of nano-surface treatments andnanomaterial composites.
• Applied research:examining the properties of nanomaterials and their usability in specific applications, for example development of filters, surface treatments in medicine and engineering, biotechnological and chemical nanomaterials for water treatment etc.
Institute for Nanomaterials, Advanced Technologies and Innovation
Laboratory of Nanolayer EvaluationLaboratory of Nanocomposite MaterialsLaboratory of Analytical Methods
Laboratory of Fluid MechanicsLaboratory of Sample Production and Product Prototypes
Laboratory of Chemical Remediation ProcessesPhysico-chemical Laboratory of NanomaterialsLaboratory of Biotechnology
Laboratory of Nanomaterial Applications
Laboratories of Material Research
Department of Nanostructure Preparation and Analysis
Department of Physical Measurements
Department of Nanomaterialsin Natural Science
Department of Nanotechnology and Informatics
doc. Ing. Stanislav Petrík, CSc.e-mail: [email protected]
prof. Ing. Václav Kopecký, CSc. e-mail: [email protected]
prof. Ing. Miroslav Černík, CSce-mail: [email protected]
prof. Dr. Ing. Jiří Maryška, CSc. e-mail: [email protected]
Institute for Nanomaterials, Advanced Technologies and Innovation
Orientation of the research program:
- sophisticated structures of production machines and robots with mechatronicsystems,
- new propulsion units for machines and mobile equipment,- development and optimization of safe engineering constructions,- progressive technologies for the processing of technical materials.
Research and development focused on the manufacturing and automobile industries
with large application potential.
Competitive Engineering
Institute for Nanomaterials, Advanced Technologies and Innovation
Laboratories of Competitive Engineering
Laboratory of Nanofiber and Nanosurface PreparationLaboratory of Innovative Textile MachineryLaboratory of HydrodynamicsLaboratory of Mechanics
Laboratory of Propulsion Units
Laboratory of Advanced Industrial TechnologiesLaboratory of Particle Technologies and ProcessesLaboratory of Prototype Technologies and Processes
Laboratory of Robotic SystemsLaboratory of Controlled Electric Drives and Servomechanisms
Department of Machinery Construction
Department of Vehicles and Engines
Department of Industrial Technology
Ing. Robert Voženílek, Ph. D.. e-mail: [email protected]
Ing. Michal Petrů, Ph. D..e-mail: [email protected]
Ing. Jiří Bobek, Ph. D.e-mail: [email protected]
Department of Robotic Systems and Mechatronic Systems
doc. Ing. František Novotný, CSc.e-mail: [email protected]
Institute for Nanomaterials, Advanced Technologies and Innovation
Types of cooperation
Partnership within grant
projects
Association(„consortium“, „active network“)
Exclusive relations
Non-exclusive relations
Applied researchand development
Basic / searchingresearch
Individual short-term contracts
Long-term collaboration
(framework agreement, collaboration agreement)
– series of subsequent contracts
Institute for Nanomaterials, Advanced Technologies and Innovation
Contract Research
0,048
0,13740,174
0,358
0,643
0,754
0,051
0,397
1,07
1
1,48
0,904
0
0,2
0,4
0,6
0,8
1
1,2
1,4
1,6
2010 2011 2012 2013 2014 2015
Contract research – in mil. EUR
prediction
reality
Institute for Nanomaterials, Advanced Technologies and Innovation
2013: 42 projects – recieved 3,5 mil. EUR
2014: 75 projects – recieved 8,6 mil. EUR
2015: 60 projects – recieved 6,2 mil. EUR
National and international grants
1,3
3
3,58,6
6,2
0
1
2
3
4
5
6
7
8
9
10
2010 2011 2012 2013 2014
indicator (mil)
reality (mil)
A structure of incomes in 2015
TAČR ALFA; 28 984
MPO TIP; 4 875
MŠMT, ESF OPVK; 24 316
MŠMT, OP VaVPI, Pre-seed; 25773,744
Evropská komise -7.RP; 2806TAČR CK; 6078
MŠMT - VES13 PROGRAMU INGO II;
86
GAČR - standardní projekt; 3156
Ministerstvo vnitra; 925
Evropská komise / FP7 / Large-scale
Integrating Collaborative projects; 2576
MŠMT / NPUI / LO12; 38372
MŠMT, Program COST CZ - veřejná soutěž VES14; 583
MŠMT/ KONTAKT II (USA); 455
MŠMT VES14 -GESHER/MOST; 473
DZS; 511 TAČR/EPSILON; 11 737 TAČR GAMA; 4118
Institute for Nanomaterials, Advanced Technologies and Innovation
NanoRem is designed to unlock the potential of nanoremediation and so support both the appropriate use of nanotechnology in restoring land and aquifer resources and the development of the knowledge-based economy at a world leading level for the benefit of a wide range of users in the EU environmental sector; 7FP; project number 309517.
FutureNanoNeeds - Framework to respond to regulatory needs of future nanomaterials and markets; 7FP; project number 604602.
GUIDEnano - Development of new strategies and creation of a digital guidance tool for nanotech industries; 7FP; project number 604387.
NanoFASE - Nanomaterial FAte and Speciation in the Environment; NanoFASE will allow Industry to assess the full diversity of
industrial nano-enabled products to a standard acceptable in regulatory registrations; H2020; project number 646002.
NANOMATCON – Multifunctional Nanoparticles and Materials Controlled by Structure; TUL in the role of lead partner; one-year infrastructure project completed with the business plan for 5 years; H2020 Teaming; project number 664512 and 664513.
EU/international projects experience
Institute for Nanomaterials, Advanced Technologies and Innovation
CENTRUM PRO NANOMATERIÁLY, POKROČILÉ TECHNOLOGIE A INOVACE | CZ.1.05/2.1.00/01.0005
Example of Commercial SolutionIng. Tomáš Martinec, PhD.
e-mail: [email protected]
tel.: +420 485 353146 Synthetic leather technology
We cooperate with company Magna on development of a new type of
machine for production of synthetic leather, using technology Slush
Molding. Basic principle of this technology is heating up of a form to
desired temperature and application of a material in a state of powder.
Advantages of the new device:• To heat up the form only infrared emitters are used. This leads to considerable savings in
energy and significantly shorter time of the cycle
• Possibility of local manipulation of temperature. Controlled local changes in thickness
(for example in the area of airbag), not being offered by anyone on the market.
ÚSTAV PRO NANOMATERIÁLY, POKROČILÉ TECHNOLOGIE A INOVACE | Research on the Top | CZ.1.05/2.1.00/01.0005
Studentská 1402/2 | 461 17 Liberec 1 | tel.: +420 485 353 006 | e-mail: [email protected]
cxi.tul.cz
Research on the Top
