Page 1 Product: PCL-818L, PCL-818H, PCL-818HD, PCL-818HG Topic: Installing PCL-818 ISA interface cards Description: This document introduces the procedure to install PCL-818 series ISA interface I/O card. Solution: Please follow the steps to install PCL-818 series ISA interface card. 1. Make sure whether the I/O address and IRQ in Device Manager are empty or not. Open Device Manager
Product: PCL-818L, PCL-818H, PCL-818HD, PCL-818HG Topic:
Installing PCL-818 ISA interface cards Description: This document
introduces the procedure to install PCL-818 series ISA interface
I/O card. Solution: Please follow the steps to install PCL-818
series ISA interface card. 1. Make sure whether the I/O address and
IRQ in Device Manager are empty or not. Open Device Manager
Page 2
Click View
Select Resources by typeto check if the I/O address and IRQ are
empty
Page 3
For instance, Base Address 300Hex and IRQ 7 are empty.
Page 4
After checking the resources, please configure the software and
hardware setting of PCL-818 series.
Page 5
2. The software configuration of PCL-818 series I/O card Open
Advantech Device Manager and add Advantech PCL-818L/H/HD/HG
Configure the base address 300Hex and Interrupt Channel 7
Page 6
Make sure if the PCL-818L works well in Advantech Device
Manager.
Note: For PCL-818 hardware configuration, please refer the
hardware manual
