2) Open C:\Program Files\Fluenz\Fluenz Italian 1 and delete
xtras folder, fluenz.exe file.
3) Mount Fluenz French 1 image. Copy xtras folder , and
fluenz.exe from mounted Fluenz French 1 to C:\Program
Files\Fluenz\Fluenz Italian 1. Actually you just replace files.
4) Now you can use Italian. The same approch works for all
levels.
Each time you run the program you get a message that you need to
use the original disk. Just make sure that Fluenz French is
mounted.
Important: Before you mount Fluenz French image, you need to
enable RMPS emulation and check if SCSI adapter is enabled on your
Virtual Disk.
You can download French image and Instructions how to enable
RMPS and SCSI adapter following link below:
http://rutracker.org/forum/viewtopic.php?t=4596199
