Upload
doankiet
View
277
Download
3
Embed Size (px)
Citation preview
MADEIRA Garnfabrik - Rudolf Schmidt KG - Zinkmattenstr. 38 - D-79108 Freiburg
Tel: +49 (0)761-510400 - Fax: +49 (0)761-508456 - www.madeira.com - [email protected]
Installation of AFS on Barudan BEDT - ZG - 501
1. To obtain the start signal from the machine, it is
necessary to install a connecting cable. For that
purpose the user panel has to be opened
2. This is the top view of the motherboard.
MADEIRA Garnfabrik - Rudolf Schmidt KG - Zinkmattenstr. 38 - D-79108 Freiburg
Tel: +49 (0)761-510400 - Fax: +49 (0)761-508456 - www.madeira.com - [email protected]
Installation of AFS on Barudan BEDT - ZG 501
3. Drill a hole at the backside of the user panel so that
the connecting cable can be introduced.
4. Fix the socket of the connecting cable.
MADEIRA Garnfabrik - Rudolf Schmidt KG - Zinkmattenstr. 38 - D-79108 Freiburg
Tel: +49 (0)761-510400 - Fax: +49 (0)761-508456 - www.madeira.com - [email protected]
Installation of AFS on Barudan BEDT - ZG 501
5. Soldering the connecting cable on the motherboard(1).
6. Soldering the connecting cable on the motherboard(2).
MADEIRA Garnfabrik - Rudolf Schmidt KG - Zinkmattenstr. 38 - D-79108 Freiburg
Tel: +49 (0)761-510400 - Fax: +49 (0)761-508456 - www.madeira.com - [email protected]
Installation of AFS on Barudan BEDT - ZG 501
7. Place the cable in a way that the user panel can
be closed.
8. Close the user panel.
MADEIRA Garnfabrik - Rudolf Schmidt KG - Zinkmattenstr. 38 - D-79108 Freiburg
Tel: +49 (0)761-510400 - Fax: +49 (0)761-508456 - www.madeira.com - [email protected]
Installation of AFS on Barudan BEDT - ZG 501
9. Position the mounting rail at the frame as shown.
10. Fix the mounting rail at the frame with the screws.
MADEIRA Garnfabrik - Rudolf Schmidt KG - Zinkmattenstr. 38 - D-79108 Freiburg
Tel: +49 (0)761-510400 - Fax: +49 (0)761-508456 - www.madeira.com - [email protected]
Installation of AFS on Barudan BEDT - ZG 501
11. Fix all screws.
12. Position the frame with the installed mounting rail at
the pantograph rail.
MADEIRA Garnfabrik - Rudolf Schmidt KG - Zinkmattenstr. 38 - D-79108 Freiburg
Tel: +49 (0)761-510400 - Fax: +49 (0)761-508456 - www.madeira.com - [email protected]
Installation of AFS on Barudan BEDT - ZG 501
13. Control the correct position of the frame. It should lie
on the machine table.
14. Make fine tuning of the mounting rail fixation if
necessary. Make use of the “variable” holes in the
mounting rail.
15. Fix the frame when it is in the right position.
MADEIRA Garnfabrik - Rudolf Schmidt KG - Zinkmattenstr. 38 - D-79108 Freiburg
Tel: +49 (0)761-510400 - Fax: +49 (0)761-508456 - www.madeira.com - [email protected]
Installation of AFS on Barudan BEDT - ZG 501
16. Here the frame is in the correct position.
17. Prepare the AFS-cable box with adhesive material.
MADEIRA Garnfabrik - Rudolf Schmidt KG - Zinkmattenstr. 38 - D-79108 Freiburg
Tel: +49 (0)761-510400 - Fax: +49 (0)761-508456 - www.madeira.com - [email protected]
Installation of AFS on Barudan BEDT - ZG 501
18. Fix the AFS-cable box on the machine.
19. Connect the 9-pin-cable from the frame to the
AFS-cable box.
MADEIRA Garnfabrik - Rudolf Schmidt KG - Zinkmattenstr. 38 - D-79108 Freiburg
Tel: +49 (0)761-510400 - Fax: +49 (0)761-508456 - www.madeira.com - [email protected]
Installation of AFS on Barudan BEDT - ZG 501
20. Connect the cable from the user panel (start box) to
the AFS-cable box.
21. Introduce the E-ZEE-preframes.
MADEIRA Garnfabrik - Rudolf Schmidt KG - Zinkmattenstr. 38 - D-79108 Freiburg
Tel: +49 (0)761-510400 - Fax: +49 (0)761-508456 - www.madeira.com - [email protected]
Installation of AFS on Barudan BEDT - ZG 501
22. Pull the E-ZEE-preframes through the rear part of the
frame.
23. Connect the docking station with the AFS-cable
station.
MADEIRA Garnfabrik - Rudolf Schmidt KG - Zinkmattenstr. 38 - D-79108 Freiburg
Tel: +49 (0)761-510400 - Fax: +49 (0)761-508456 - www.madeira.com - [email protected]
Installation of AFS on Barudan BEDT - ZG 501
24. Fix the docking station with adhesive material right
behind the pantograph maintaining a distance of few
millimetres.