Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
Design Highlights
email: [email protected] - tel: +44 (0) 1438 833577 - fax: +44 (0) 1438 833565
Installation Instructions
- Unique Scissor Design- Solid Steel Construction- VESA Compliant Up To 400x400- Easy One Handed Operation- Bi-Directional 60° Swivel
PS42/PS50 - Plasma Swivel Bracket
Future AutomationUnit 4, The Orbital CentreCockerell CloseGunnels Wood RoadStevenageHertfordshireSG1 2NBUnited KingdomTel: +44 (0) 1438 833 577Fax: +44 (0) 1438 833 565Email: [email protected]
Future AutomationEnterprise Park
127 Venture DriveDover
New Hampshire03820
USA
Tel: +1 (603) 742 9181Email: [email protected]
www.futureautomation.net
Future Sound & Vision trading as Future Automation intend to make this and all documentation as accurate as possible. However, Future Automation makes no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use of this product. The information contained in this document is subject to change without prior notice or obligation of any kind. Future Automation makes no representation of warranty, expressed or implied, regarding the information contained herein. Future Automation assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document.
Warnings:1. Read all technical instructions fully before installation and use. It is the installer’s responsibility to
ensure that all documentation is passed on the end user and read fully before operation.2. Follow all technical specifications and instructions during installation.3. Refer all servicing to qualified personnel. Servicing is required regularly on an annual basis, when
the apparatus is damaged in any way, liquid has been spilled or objects have fallen into theapparatus, the apparatus has been exposed to rain or moisture, does not operate normally, orhas been dropped.
4. For all mounted apparatus, the apparatus should be installed on solid wood, bricks, concrete orsolid wood columns and battens.
5. Always turn off power at source before putting on or taking off parts and cleaning.6. Exceeding the weight capacity can result in serious personal injury or damage to equipment.
Issue 001
email: [email protected] - tel: +44 (0) 1438 833577 - fax: +44 (0) 1438 833565 email: [email protected] - tel: +44 (0) 1438 833577 - fax: +44 (0) 1438 833565Page 1 of 2 Page 2 of 2
PS42 / PS50 - Plasma Swivel BracketPS42 / PS50 - Plasma Swivel BracketPackage Contents This pack should contain the following:
1. PS42/PS50 Wall Bracket/Scissor Arms2. PS42/PS50 Screen Mount (Attached to PS42/PS50)3. VESA Bolt Pack (Not Shown)
Installation - Stage 11. Detach the Screen Mount from the PS42/PS50 Swivel Bracket, by removing the two retaining bolts at the bottom of the screen mount. The screen mount will then lift upwards and hook off.2. Place the screen face down on a flat surface and attach the Screen Mount to the mount holes on the back. Use the provided spacers if necessary. If a wider mount pattern is needed, see the VESA configuration document supplied.
1.
2.
1. 2.
Installation - Stage 21. Place the PS42/PS50 Wall Bracket and Scissor Arms onto the Screen Uprights and measure the distance from the top wall mounting holes to the top of the screen.2. Remove the PS42/PS50 Wall Bracket and Scissor Arms from the Screen Uprights on the back of the screen and place against the wall. Make sure the bracket is level, then mark and drill the mounting holes. 3. Attach the PS42/PS50 Swivel Mount to the wall using suitable fixings (not provided).
Installation - Stage 31. Make sure the bracket can be pulled and turned from the wall correctly, then hook the screen and Screen Mount on to the Wall Bracket and Scissor Arms by aligning the two locating nubbins on the Screen Mount with the holes in the plate on the top of the central bar. Secure the screen with the retraining bolts removed in Stage 1.2. If the PS42/PS50 seems too loose or too stiff, tighten or loosen the grub screws shown.
1. 2.
1. 2/3.
Sliding Collar
Grub Screw (both sides)