59173 Issue 5 9 March 2018

INSTALLATION INSTRUCTIONS

Dimensions (mm) Ceiling Cut-out (Recessed Only)

Remove Knockouts (as required) 1

2a 2b

3

A

4

230V ac 50/60Hz IP30 ta: 0°C…+35°C

Cut out holes in ceiling prior to installation.

Ceiling tile needs to be between 5-25mm thick.

Recessed Surface Mounted

Not applicable for Central Battery versions

(6a, 6b)

59173 Issue 5 9 March 2018

INSTALLATION INSTRUCTIONS

LD4 Only

LD5 Open Area Lens LD5 Escape Route

Escape Route Variants (LD4 & LD5 Only) Additonal Information

Refer to “User Guide for Emergency Lighting Products” on the mackwell website, for a description of operation and functionality of luminaires and control gear.

If the luminaire no longer meets its rated duration of operation after the recharge period, the battery must be replaced.

For Battery replacement order codes please refer to the productdatasheet.

The LED light source is non-replaceable. Once end-of-life is reached, the whole luminare will need to be replaced.

Basic insulation is provided between the Live supply and Dalicontrol circuits.

Suitable for indoor use ONLY.

Ensure lens choice and orientation matches approved lighting design

Cable Size & Strip Length

C.S.A: 0.75 to 2.5mm2

Solid conductor or 7 stranded wire ends

5

6a 6b

90° optional

Open Area Lens

Escape Route Lens

90° optional

X 0 A***E** 180 X 0 ABC*EF* 180

Loop-in Loop-out Loop-in Loop-out