Embed Size (px)
Citation preview
Installation in Taxi
Accessories CatalogueMounting Solutions for Installation
of Communication Equipment in Taxi-Vehicles.
Products for Installation in Taxi-vehicles
Mounting Platform for TaximetersExtra strength construction for heavier equipment. Quick installation without damagingthe dashboard.
ProClip Mounting PlatformProClip is a mounting platform for all communication equipment. The ProClip is availablein different poistions and for most vehicles on the market. The installation is quick andeasy and does not damage the interior.
HolderThere are holders for taximeter-printers and -screens, PDAs, mobile phones, GPS-unitsand two way radio. Easy to attach onto a ProClip.
Monitor MountsMonitor mounts for navigation systems or multimedia units come in various models.Monitors for navigation systems are attached onto a monitor mount, attached onto aProClip. Monitors for multimedia units are attached onto monitor mounts on the headrestor between the front seats. You can take the monitor with you when leaving the vehicle.
Box for Video/DVDStrong boxes for video and DVD units.
Mounting AccessoriesFor special installations, make you own solution by using different mounting accessories.Mounting plates with predrilled holes, angled mounting plates, tilt swivels for anadjustable installation etc. There are also solutions for shifting between units or movingequipment between vehicles.
The products are manufactured in black ABS plastic and tailor made for each model.
For more information about the products, please visit www.brodit.se
2
213408 Taximeter
213411 Taximeter
852800 ProClip Center mount
Mounting Platforms for TaximeterExtra strength construction for heavier equipment. Quick installation without damaging the dashboard. Ifyou can�t find your vehicle in the list please contact Brodit: in some cases we can develop products onrequest. The monitor mounts listed here fit monitors with a vertical slot in back. For a complete productrange, please visit www.brodit.se
852403 ProClip Center mount
Mercedes Benz E-Class 95-01 852807 ProClip Angled mount822997 Monitor mount, Between seats mount852198 ProClip Center mount832201 ProClip Console mount810820 Monitor mount, Headrest mount810826 Monitor mount, Headrest mount with flexible arm802199 ProClip Left mount213408 Taxameter mount, high213417 Taxameter mount
This is for Sedan/Coupé. For Combi the years 95-02 apply.
Mercedes Benz E-Class 02-05823031 Monitor mount, Between seats mount853075 ProClip Center mount853083 ProClip Center mount, high833042 ProClip Console mount, angled810820 Monitor mount, Headrest mount810826 Monitor mount, Headrest mount with flexible arm803041 ProClip Left mount213411 Taxameter mount
Saab 9-5 98-05852593 ProClip Angled mount852503 ProClip Angled mount (will block cup holder)823011 Monitor mount, Between seats mount852800 ProClip Center mount, NOT wood grain panel852502 ProClip Center mount High, NOT wood grain panel853040 ProClip Center mount, ONLY wood grain panel853039 ProClip Center mount High, ONLY wood grain panel832504 ProClip Console mount810810 Monitor mount, Headrest mount810816 Monitor mount, Headrest mount with flexible arm802529 ProClip Left mount213412 Taxameter mount
Volkswagen Passat 97-04852404 ProClip Angled mount, NOT original CD player853050 ProClip Angled mount, ONLY original CD player823038 Monitor mount, Between seats mount 97-00822998 Monitor mount, Between seats mount 01-03852403 ProClip Center mount832860 ProClip Console mount830520 ProClip Console mount, adjustable830525 ProClip Console mount, adjustable with tilt swivel810820 Monitor mount, Headrest mount810826 Monitor mount, Headrest mount with flexible arm802509 ProClip Left mount213403 Taxameter mount
3
213414 Taxameter mount
213402 Taxameter mount
Volvo S70/V70 97-00852412 ProClip Angled mount822999 Monitor mount, Between seats mount852410 ProClip Center mount852426 ProClip Center mount, high832409 ProClip Console mount830520 ProClip Console mount, adjustable830525 ProClip Console mount, adjustable with tilt swivel810850 Monitor mount, Headrest mount810856 Monitor mount, Headrest mount with flexible arm802408 ProClip Left mount213402 Taxameter mount
Volvo V70 New 00-05852779 ProClip Angled mount823000 Monitor mount, Between seats mount852777 ProClip Center mount852982 ProClip Center mount, right832912 ProClip Console mount832820 ProClip Console mount, angled832985 ProClip Console mount high, ONLY Cross Country810850 Monitor mount, Headrest mount810856 Monitor mount, Headrest mount with flexible arm802778 ProClip Left mount213404 Taxameter mount, Center mount, right213413 Taxameter mount, Center mount
213413 Taxameter mount, Center mount
Volvo S40/V40 01-03852825 ProClip Angled mount852826 ProClip Center mount830510 ProClip Console mount, adjustable830515 ProClip Console mount, adjustable with tilt swivel810860 Monitor mount, Headrest mount810866 Monitor mount, Headrest mount with flexible arm213414 Taxameter mount
4
Mounting Platform for Taximeters
213408, Center mount HighMercedes Benz E-Class95-01This is for Sedan/Coupé. ForCombi the years 95-02 apply.
213417, Center mount Mercedes Benz E-Class95-01This is for Sedan/Coupé. ForCombi the years 95-02 apply.
213411Mercedes Benz E-Class02-05
213412Saab 9-5 98-05
213403Volkswagen Passat 97-04
213402Volvo S70/V70 97-00
213404, Center mount Right
Volvo V70 New 00-05213414Volvo S40/V40 01-03
213413 Center mountVolvo V70 New 00-05
5
213400Compact RX60, Topmounted, install ontotaximeter mount.
213401Compact RX60, Sidemounted, install ontotaximeter mount.
213409Compact RX80, Topmounted, install ontotaximeter mount.
213410Cen/Com, Holder forscreen.
213407Semmel C20/C19Adapter plate, installonto VDO mount
213406Semmel C20/C19,Cover plate for screen.
Holder for Taximeter Printers
Monitor Mounts and Accessories for Taximeter Screens
Box for Video/DVD
211100Box with lid for video,NRG VE20R
211101Box for CD-player, VDODayton
211102Box without lid forvideo, Clarion CVP9600/9700
211103Lid for box (211102) forvideo, Clarion CVP9600/9700
211104Box for DVD player.
211150Box with lid for VHScassettes.
6
213040Mounting plate forremote control tonavigation system.Attach below monitor,onto same ProClip asmonitor.
213201Sun cap, Fits VDODayton 5000/MM 5500
Mounting Accessories
213018Mounting plate with tiltswivel, centered.Predrilled holes (AMPS-standard). Install ontoProClip.
213019Mounting plate with tiltswivel, parallell centerpoint. Predrilled holes(AMPS-standard).Install onto ProClip.
213020Double mounting platewith two tilt swivels. Forinstallation of two unitson the same ProClip.Predrilled holes (AMPS-standard)
213021Mounting plate with tiltswivel. Install ontoProClip.
213029Mounting bracket fore.g. remote control. FitsFord Focus 99-.
213057Mounting plate for extracontrol button, e.g. lightswitch. Fits e.g. ChevroletTransporter 97-. Install incompartment to the left ofthe steering wheel.
861636 6 mm wide861637 12 mm wide861638 25 mm wideHigh strength doublesided adhesive tape. 15meter/roll.
213017ABS-plastic for specialdesigns. Contains 4 pcs 5x80x420, 4 pcs 5x120x420, 2 pcs 5x160x420, 1 pcs 5x200x420 mm
213005Mini Move Clip. Forswitching/moving equip-ment between vehicles.Attach onto ProClip ande.g. holder. 2 backpieces + 1 front piece.
213006MoveClip. For switching/moving equipmentbetween vehicles. Attachonto ProClip and e.g.holder. 2 back pieces+ 1front piece, 4 screws.
213023 Turn Around Plate. Allows youto switch your equipmentbetween an upright/horizontalposition. With predrilled holesfor Nokia/Sony Ericssonoriginal HF-kits. Install ontoProClip.
213010 Plate 15°. 213011 Plate 8°. Used in installation inorder to change theangle. 5 pieces perpack.
213077 angled 30° 213078 angled 45° 213079 angled 60° Angled mounting platt-forms.Attach with adhesive tape ontoa flat, horizontal surface.Perfect e.g. for the boat.
213053 Extention plate. Withpredrilled AMPS-standardholes.
7
Monitor Mounts for monitors with thumb screw attachmentThe monitor mounts fit a number of screen models with a hole underneath for thumb screw attachment (�-thread). You can take the monitor with you when leaving the vehicle.
213067 Adapterplate for monitor,Tablet DVD. The choice when you want toinstall a monitor without a vertical slot on theback (with a hole underneath, �-thread) onto aProAdapt product.
213069 Adapterplate forTablet DVD, with tilt swivel,centered. The choice for anadjustable monitor angle.Install onto ProClip.
Monitor Mounts for monitors with vertical slot on backThe monitor mounts fit a number of screen models with a vertical slot in back, e.g. Alpine, Blaupunkt, Clarion,LCM, Magneti Marelli, Panasonic, Pioneer, Sony, VDO etc. You can take the monitor with you when leaving thevehicle.
213032Monitor mount with tiltswivel, install onto ProClip.
213034Monitor mount with tiltswivel, parallell center point7 cm. install onto ProClip.
213035Monitor mount with tiltswivel, angled 90°. Installonto a horizontal surface.
213050Monitor mount with tiltswivel, low plate. Installonto ProClip.
213047Monitor mount, angled 20°,centered. For a fixed,angled screen position.Install onto ProClip.
213261Monitor mount with tiltswivel, low mounting plate.Fits only VDO Dayton5000/MM 5500. Install onto ProClip.
213048Monitor mount, right,angled 20°. Install ontoProClip.
215021Monitor mount with tiltswivel, angled 90°. Installonto a horizontal surface.
8
ProClip Mounting PlatformThe ProClip is tailor made for each car model. Installation is quick and easy, it only takes 60 seconds. Youdon�t need special tools and there is no need to drill holes or dismantle of the dashboard: you simpy snap itinto place into gaps in the dashboard. The ProClip is available for serveral position options and mostvehicle models. To find a ProClip to your vehicle, please visit www.brodit.se
The ProClip is available in different positions... ...for several installations in the vehicle.
9
Multimedia monitorwith a vertical slot in back.
Multimedia monitor or Tablet DVD with a hole underneath for thumb screw attachment (�-thread).
For vertical slot
in back.
For thumb screw
attachment.
Monitor MountsThere are a variety of monitor models in the marketplace, with different installation solutions. Most monitorshave either a vertical slot in back or a hole underneath for thumb screw attachment. We provide monitormounts for both. The monitor mounts listed here fit monitors with a vertical slot in back (unless somethingelse is stated) . For a complete product range, please visit www.brodit.se
Headrest monitor mount with flexible armThe headrest monitor mount with flexible arm allows you toadjust the monitor just the way you want: higher, lower, angle it,tilt it... The installation is quick and will not damage the interior ofyour vehicle. You can easily take the monitor with you whenleaving the vehicle
Headrest monitor mountWill be attached a front seat�s headrest. On themonitor mount there is a tilt swivel that allows foreasy adjustment for better viewing. The installationis quick and will not damage the interior of yourvehicle. The monitor can easily be removed whenleaving the vehicle.
Monitor between front seatsA car specific monitor mount with tilt swivel. Themonitor will be placed between the front seats, givingthe back seat passangers a perfect view. The monitorcan be tilted and angled in order to avoid reflectionson the screen. You can take the monitor with youwhen leaving the car. The interior of the vehicle willnot be damaged, as no drilling holes is required.
10
Holder for Two-Way RadioThere are passive holders and active holders with charging available for two-way radios. Install ontoProClip. For more information about these products, please visit www.brodit.se
Holder for Mobile PhonesPassive holders are available for most phone models. Portable handsfree and charging cables can beconnected to the phone when it is in the holder. Accommodates all standard battery sizes. For moreinformation about these products, please visit www.brodit.se
Holder for GPS unitsKeep your TomTom Go, Navman ICN 510, Garmin Quest etc. in a holder in your vehicle and you willhave it in easy reach. There are passive holders and active holders with charging. The holdersprovide a firm fit, and you can adjust for easier viewing. You can take the unit with you when leavingthe vehicle. Install onto a ProClip Mounting Platform. Holders for Bluetooth GPS recievers areavailable for attachment on top of the dashboard, by the windshield.
11
2311
32 5
08
Tel +46 (0)505 109 00Fax +46 (0)505 445 72
Gesällvägen 8546 34 Karlsborg, Sweden
PDA HoldersPDA holders are available with various features, to suit different users and demands. For you who use yourPDA for GPS, there are many alternatives, for more info please visit www.brodit.se. All holders are attachedonto a tilt swivel, this allows for adjustment in order to avoid light reflection in the screen. The PDA holdershave a perfect fit and hold your PDA firmly in place. Attach the holder onto a ProClip Mounting Platform,and you will always have your PDA within easy reach -safe and convenient.
Passive Holder
Holder for Cable Attachmentwith Built In Connector
Holder for Cable Attachmentwith Cable Plug Attachment
Active Holderwith Cigg-Plug
Active Holderfor Fixed Installation
Holder with Speaker
Holder that also charges a Bluetooth GPSAn active holder with a straight cable with open end for fixed installation and a PS2-cable with RX, TX, V5.The holder can be connected directly to a GPS reciever or used for power supply of a Bluetooth GPS. Gives a discreet, neat installation without cables hanging over the interior.
NEW!
