Installation Elastic Poly-V for VW Fox(Instalación de Correa Poly_V para Fox)

Installation Poly-V belt (elastic) for the air conditioning compressor – Install the Poly-V belt (elastic), in its correct working position, on the air conditioning compressor pulley and on the crankshaft pulley, together with Assembly tool-A-.  

– Install the Hook-B - on the upper section of the Poly-V belt.   – Turn the crankshaft slowly clockwise, until the Poly-V belt is completely installed. – Remove the Assembly tool and the Hook.       – Install the Hook-a- on the lower section of the Poly-V belt.

–Turn the crankshaft slowly clockwise, until the Poly-V belt is completely installed. Take care that the Poly-V belt is perfectly installed both on the crankshaft pulley and on the air conditioning compressor pulley.

– Remove the Hook-a- on the lower section of the Poly-V belt. Poly-V belt (elastic) for the Generator (Alternator) -C- and power steering oil.

Install the Poly-V belt on the pulleys for the Generator (Alternator) -C-, power steering oil pump, return and crankshaft, together with Assembly tool-a-.

–Turn the crankshaft slowly clockwise, until the Poly-V belt is completely installed.

–Ensure that the Poly-V belt is perfectly installed in the crankshaft pulleys, Generator (Alternator) -C- and power steering oil pump.

–Install the front right wheel case protector → Body - External assembly.

– Install the Spark plugs -Q- using the Spark plug wrench -3122B-.  

– Install the Spark plug connectors -P...- using the Assembly tool -3277 A- or Assembly tool -T10029-.