Polarity Matters! RG-59U Coax (Not supplied) 500 ft. max. To Monitor, Video Recorder 16 AWG - 200 Ft 18 AWG - 100 Ft 1812 CCTV CAMERA KIT Installation 1812-148-M-7-19 DoorKing Part Number 1812-147 Copyright 2019 DoorKing ® , Inc. All rights reserved. The camera (1894-040) in this kit is a high quality camera with 520 lines of resolution. Minimum illumination is required (.25 Lux). The camera automatically switches from color to black and white in low light conditions. Not for use in 1812 Wall Mount Models. Kit Includes: Camera on mounting bracket, CCTV Circuit board, 2 plastic collars and screws, 12 VDC transformer, Plastic lens. Place plastic lens between mounting bracket and 1812 front door. Key Lock Keypad Bracket Power Terminal CCTV Circuit Board Plastic Collar Camera Plug Discard protective cover from 3/16” hole. Discard existing 2 screws. Mounting Bracket Output CCTV Circuit Board Connections 12 VDC To BNC Connector To Power Terminal UTP wire 1400 ft. max. Power Wire Run Black (-) Red (+) To Monitor, Video Recorder DoorKing offers video adapters (Not supplied) for up to 1400 ft using unshielded twisted pair telephone wire. (P/N 1812-039) VTT-2000 Video Adapter (At Monitor, Video Recorder) VTT-2000 Video Adapter (At 1812) 1. Disconnect front door accessories plug, 18-pin main terminal connector and keypad plug from 1812 circuit board. 2. Remove 4 corner screws from the circuit board. Remove circuit board. 3. Run the CCTV camera RG-59U Coax and power wires to the 1812 through the existing conduit. - + BNC Connector 1. Black Wire 2. Red Wire 3. White Wire 4-7. Open - No Wires Camera Plug 123 4567 123 4567 1812 Front Door Disconnect power to 1812 ! ! Remove 1812 circuit board (Not shown): CAUTION The 1812 circuit board contains static sensitive components. Discharge any static electricity from your hands by touching a proper ground device before removing the circuit board. Wire not supplied 120 S. Glasgow Avenue Inglewood, California 90301 U.S.A. See 90 Series manual to install camera into 1835/1837.

Installation before 2. Bracket Mounting 3.€¦ · The camera (1894-040) in this kit is a high quality camera with 520 lines of resolution. Minimum illumination is required (.25 Lux)

Download PDF Report

Upload
others
View
0
Download
0

Embed Size (px)

Citation preview

Page 1: Installation before 2. Bracket Mounting 3.€¦ · The camera (1894-040) in this kit is a high quality camera with 520 lines of resolution. Minimum illumination is required (.25 Lux)

Polarity Matters!

RG-59U Coax (Not supplied)

500 ft. max.To Monitor, Video Recorder

16 AWG - 200 Ft18 AWG - 100 Ft

1812 CCTV CAMERA KIT

Installation

1812-148-M-7-19

DoorKing Part Number

1812-147

The camera (1894-040) in this kit is a high quality camera with 520 lines of resolution. Minimum illumination is required (.25 Lux). The camera automatically switches from color to black and white in low light conditions. Not for use in 1812 Wall Mount Models.

Kit Includes: Camera on mounting bracket,CCTV Circuit board, 2 plastic collars and screws,12 VDC transformer, Plastic lens.

Place plastic lens

between mounting

bracket and 1812

front door.

Key Lock

Keypad Bracket

Power

Terminal

CCTV

Circuit

Board

Plastic CollarCamera

Plug

Discard

protective

cover from

3/16” hole.

Discard

existing

2 screws.

MountingBracket

Output

CCTV Circuit BoardConnections 12 VDC

To BNCConnector

To PowerTerminal

UTP wire

1400 ft. max.

Power Wire Run

Black (-)

Red (+)

To Monitor,Video Recorder

DoorKing offers video adapters (Not supplied) for up to 1400 ft using unshielded twisted pair telephone wire. (P/N 1812-039)

VTT-2000Video

Adapter(At Monitor,

VideoRecorder)

VTT-2000Video

Adapter(At 1812)

1. Disconnect front door accessories plug, 18-pin main terminal connector and keypad plug from 1812 circuit board.

2. Remove 4 corner screws from the circuit board. Remove circuit board.

3. Run the CCTV camera RG-59U Coax and power wires to the 1812 through the existing conduit.

- +

BNC

Connector

1. Black Wire2. Red Wire3. White Wire4-7. Open - No Wires

Camera Plug

123 4 5 6 7

1812 Front Door

Disconnect power to 1812 ! !Remove 1812 circuit board (Not shown):CAUTION The 1812 circuit board contains static sensitive components. Discharge any static electricity from your hands by touching a

proper ground device before removing the circuit board.

Wire not supplied

120 S. Glasgow AvenueInglewood, California 90301 U.S.A.

See 90 Series manual to install camera into 1835/1837.