Click here to load reader
Upload
fouaksel
View
55
Download
2
Embed Size (px)
Citation preview
02/08/13 INSTALLATION ANALYSEUR DE LOG PROXY SQUID AVEC AWSTATS | POMENTE Guillaume
www.guillaume-p.net/installation-analyseur-log-proxy-squid-awstats/ 1/6
POMENTE GUILLAUMELe partage, un esprits sans limites…
INSTALLATION ANALYSEUR DE LOG PROXYSQUID AVEC AWSTATS
Publié le Lundi, novembre 19th, 2012 by in Debian, guillaume pomente, Linux, POMENTE
Guillaume, Tuto / Howto / tutorial with Pas de commentaires
La solution proxy squid produit des fichiers logs qu’il est intéressant de regarder via une
interface web. Voici comment mettre en place un analyseur de fichiers log pour squid
avec AWSTATs.
1 – Installation d’Apache
Awstat génère des pages web, il est donc nécessaire d’installer un serveur http. Dans
mon cas je vais utiliser Apache.
aptitude install apache2
2 – Installation d’AWSTATs
AWStats est un outils gratuits qui permet d’analyser des fichiers LOGs en les
retranscrivant sous forme de pages web
aptitude install awstats
Création des dossier wwwroot et cgibin
mkdir /usr/share/doc/awstats/examples/wwwroot
mkdir /usr/share/doc/awstats/examples/wwwroot/cgi-bin
Extraction du fichier de configuration
cd /usr/share/doc/awstats/examples/
gzip -d /usr/share/doc/awstats/examples/awstats.model.conf.gz
Copie du fichier de configuration
cp /usr/share/doc/awstats/examples/awstats.model.conf
/usr/share/doc/awstats/examples/wwwroot/cgi-bin/
Execution du script de configuration
cd /usr/share/doc/awstats/examples/
perl awstats_configure.pl
Recherche
ARTICLES RÉCENTS
INSTALLATION
CONFIGURATION LINSHARE
AVEC LIAISON LDAP ou
ACTIVE DIRECTORY SUR
DEBIAN
INSTALLATION ET
CONFIGURATION TERMINAL
SERVEUR – APPREMOTE SUR
WINDOWS 2008 R2
DEPOT POUR DEBIAN WHEEZY
TUTO SERVEUR CALENDRIER
AVEC DAVICAL ET AGENDAV
SOUS DEBIAN
IMPRESSION EN BOUCLE SUR
IMPRIMANTE LOCALE
Accueil Contact À propos
INSTALLATION CONFIGURATION LINSHARE AVEC LIAISON LDAP ou ACTIVE DIRECTORY SUR DEBIAN
LinShare est une application de partage de fichiers sécurisé libre et gratuite,
développée et distribuée par l'entreprise Linagora selon les méthodes de
développement du logiciel libre/open source. LinShare permet la mise en place
[more]
zimbra
windows
windows 7
web 2.0
vmware server
vmwareutilisateur
squidguard
synchronisation
tuto
Ubuntu
squidsqueeze
serveur 2008
serveurscript
pomente
POMENTE
Guillaume
powershell
R2sauvegarde zimbra
NTPmysqlMicrosoft
installation
how toguillaumeGLPI
désactiver
erreur
ESXi
esxi 4.1
Debiancreation
configuration
automatique
2008 R2
active
directory
ajout
2008
• • •
02/08/13 INSTALLATION ANALYSEUR DE LOG PROXY SQUID AVEC AWSTATS | POMENTE Guillaume
www.guillaume-p.net/installation-analyseur-log-proxy-squid-awstats/ 2/6
—– AWStats awstats_configure 1.0 (build 1.8) (c) Laurent Destailleur —–
This tool will help you to configure AWStats to analyze statistics for
one web server. You can try to use it to let it do all that is possible
in AWStats setup, however following the step by step manual setup
documentation (docs/index.html) is often a better idea. Above all if:
- You are not an administrator user,
- You want to analyze downloaded log files without web server,
- You want to analyze mail or ftp log files instead of web log files,
- You need to analyze load balanced servers log files,
- You want to ‘understand’ all possible ways to use AWStats…
Read the AWStats documentation (docs/index.html).
—–> Running OS detected: Linux, BSD or Unix
Warning: AWStats standard directory on Linux OS is ‘/usr/local/awstats’.
If you want to use standard directory, you should first move all content
of AWStats distribution from current directory:
/usr/share/doc/awstats/examples
to standard directory:
/usr/local/awstats
And then, run configure.pl from this location.
Do you want to continue setup from this NON standard directory [yN] ? Y
—–> Check for web server install
Enter full config file path of your Web server.
Example: /etc/httpd/httpd.conf
Example: /usr/local/apache2/conf/httpd.conf
Example: c:\Program files\apache group\apache\conf\httpd.conf
Config file path (‘none’ to skip web server setup):
> /etc/apache2/apache2.conf
—–> Check and complete web server config file ‘/etc/apache2/apache2.conf’
Add ‘Alias /awstatsclasses « /usr/share/doc/awstats/examples/wwwroot/classes/ »‘
Add ‘Alias /awstatscss « /usr/share/doc/awstats/examples/wwwroot/css/ »‘
Add ‘Alias /awstatsicons « /usr/share/doc/awstats/examples/wwwroot/icon/ »‘
02/08/13 INSTALLATION ANALYSEUR DE LOG PROXY SQUID AVEC AWSTATS | POMENTE Guillaume
www.guillaume-p.net/installation-analyseur-log-proxy-squid-awstats/ 3/6
Add ‘ScriptAlias /awstats/ « /usr/share/doc/awstats/examples/wwwroot/cgi-bin/ »‘
Add ‘<Directory>’ directive
AWStats directives added to Apache config file.
—–> Update model config file ‘/usr/share/doc/awstats/examples/wwwroot/cgi-
bin/awstats.model.conf’
File awstats.model.conf updated.
—–> Need to create a new config file ?
Do you want me to build a new AWStats config/profile
file (required if first install) [y/N] ?Y
—–> Define config file name to create
What is the name of your web site or profile analysis ?
Example: www.mysite.com
Example: demo
Your web site, virtual server or profile name:
> NOMDEVOTRESERVEURSQUID
—–> Define config file path
In which directory do you plan to store your config file(s) ?
Default: /etc/awstats
Directory path to store config file(s) (Enter for default):
>[ENTRÉE]
A SIMPLE config file has been created: /etc/awstats/awstats.SrvProxy.conf
You should have a look inside to check and change manually main parameters.
You can then manually update your statistics for ‘SrvProxy’ with command:
> perl awstats.pl -update -config=SrvProxy
You can also read your statistics for ‘SrvProxy’ with URL:
> http://localhost/awstats/awstats.pl?config=SrvProxy
Press ENTER to finish…
[ENTRÉE]
02/08/13 INSTALLATION ANALYSEUR DE LOG PROXY SQUID AVEC AWSTATS | POMENTE Guillaume
www.guillaume-p.net/installation-analyseur-log-proxy-squid-awstats/ 4/6
Editer le fichier de configuration
nano /etc/awstats/awstats.NOMDEVOTRESERVEURSQUID.conf
Modifier les lignes suivantes :
LogFile= »/var/log/squid/access.log »
LogFormat= »%host %other %logname %time1 %methodurl %code %bytesd %other »
SiteDomain= »NOMDEVOTRESERVEURSQUID »
2-1 Configuration de Squid pour AWSTATs
nano /etc/squid/squid.conf
Ajouter les lignes suivantes avant les ACLs
# Configuration pour AWStats
logformat full %>a %ui %un [%{%d/%b/%Y:%H:%M:%S +0000}tl] « %rm %ru HTTP/%rv » %Hs
%<st « %{Referer}>h » « %{User-Agent}>h » « - » %tr %{Host}>h
access_log /var/log/squid/access.log full
Redémarrer Squid
/etc/init.d/squid restart
Générer les premieres statistiques
/usr/lib/cgi-bin/awstats.pl -config=NOMDEVOTRESERVEURSQUID –update
/!\ Si votre serveur Squid a déjà générer les logs, vous allez surement avoir des erreurs
au lancement de la commande /!\
Exemple d’erreurs :
Create/Update database for config
« /etc/awstats/awstats.NOMDEVOTRESERVEURSQUID.conf » by A WStats version 6.95
(build 1.943)
From data in log file « /var/log/squid/access.log »…
Phase 1 : First bypass old records, searching new record…
Searching new records from beginning of log file…
AWStats did not find any valid log lines that match your LogFormat paramete r, in the
50th first non commented lines read of your log.
Your log file /var/log/squid/access.log must have a bad format or LogFormat parameter
setup does not match this format.
Your AWStats LogFormat parameter is:
%host %other %logname %time1 %methodurl %code %bytesd %other
This means each line in your web server log file need to have the following personalized
log format:
%host %other %logname %time1 %methodurl %code %bytesd %other
And this is an example of records AWStats found in your log file (the recor d number 50
in your log):
1555482948.360 140 ip.client TCP_MISS/504 1585 GET http://site.com/ –
02/08/13 INSTALLATION ANALYSEUR DE LOG PROXY SQUID AVEC AWSTATS | POMENTE Guillaume
www.guillaume-p.net/installation-analyseur-log-proxy-squid-awstats/ 5/6
DIRECT/127.0.0.1 text/html
Setup (‘/etc/awstats/awstats.NOMDEVOTRESERVEURSQUID.conf’ file, web server or
permissions ) may be wrong.
Check config file, permissions and AWStats documentation (in ‘docs’ directo ry).
Pour résoudre cet erreur supprimer le contenu du fichier /var/log/squid/access.log
nano /var/log/squid/access.log
Supprimer toutes les lignes
Générer a nouveau les statistiques
/usr/lib/cgi-bin/awstats.pl -config=NOMDEVOTRESERVEURSQUID –update
Create/Update database for config
« /etc/awstats/awstats.NOMDEVOTRESERVEURSQUID.conf » by AWStats version 6.95
(build 1.943)
From data in log file « /var/log/squid/access.log »…
Phase 1 : First bypass old records, searching new record…
Searching new records from beginning of log file…
Phase 2 : Now process new records (Flush history on disk after 20000 hosts)…
Jumped lines in file: 0
Parsed lines in file: 30
Found 0 dropped records,
Found 15 corrupted records,
Found 0 old records,
Found 15 new qualified records.
http://IP.DE.VOTRE.SERVEUR.AWSTATS/cgi-bin/awstats.pl?
config=NOMDEVOTRESERVEURSQUID
Les stats apparaissent.
Si vous n’avez pas les images qui s’affichent, créer un lien symbolique
ln -s /usr/share/awstats/icon/ /var/www/awstats-icon
2-2 Planifié la generation des stats
Pour généré les stats périodiquement, éditer la cron
crontab -e
02/08/13 INSTALLATION ANALYSEUR DE LOG PROXY SQUID AVEC AWSTATS | POMENTE Guillaume
www.guillaume-p.net/installation-analyseur-log-proxy-squid-awstats/ 6/6
Poster un commentaire
Ajouter la ligne suivante à la fin du fichier. Tous les jours à 7h du matin une mise à jour
sera effectuée
0 7 * * * perl /usr/lib/cgi-bin/awstats.pl -config=NOMDEVOTRESERVEURSQUID -update
Redémarrer la cron
/etc/init.d/cron restart
Auteur : POMENTE Guillaume
Mots-Clés
Pas de commentaires
Laisser un commentaire
Votre adresse de messagerie ne sera pas publiée. Les champs obligatoires sont
indiqués avec *
Nom *
Adresse de contact *
Site w eb
Commentaire
Vous pouvez utiliser ces balises et attributs HTML : <a href="" title=""> <abbr title=""> <acronym title=""> <b>
<blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>
Laisser un commentaire
© Copyright 2012 POMENTE Guillaume - Powered by WordPress