13

Install Rev Pro 2.4 Using CD Provided During Training –Load CD into Drive & View Contents –Run Setup.exe Using Link on CD Catalog 2006 –Navigate to “Downloads”

Embed Size (px)

Citation preview

Page 1: Install Rev Pro 2.4 Using CD Provided During Training –Load CD into Drive & View Contents –Run Setup.exe Using Link on CD Catalog 2006 –Navigate to “Downloads”
Page 2: Install Rev Pro 2.4 Using CD Provided During Training –Load CD into Drive & View Contents –Run Setup.exe Using Link on CD Catalog 2006 –Navigate to “Downloads”

Install Rev Pro 2.4

• Using CD Provided During Training – Load CD into Drive & View Contents– Run Setup.exe

• Using Link on CD Catalog 2006– Navigate to “Downloads” Section– Click “Revelation Professional” Link

• Download from TCS Website– www.tcsbasys.com/revpro_download.asp

Page 3: Install Rev Pro 2.4 Using CD Provided During Training –Load CD into Drive & View Contents –Run Setup.exe Using Link on CD Catalog 2006 –Navigate to “Downloads”

Rev Pro Manual

• Printed Copy– See Rev. Pro. Tab of Basic Training Manual

• Electronic Copy– Included on the Training CD– Included on the CD Catalog

• Download from TCS Website– www.tcsbasys.com/revpro_download.asp

Page 4: Install Rev Pro 2.4 Using CD Provided During Training –Load CD into Drive & View Contents –Run Setup.exe Using Link on CD Catalog 2006 –Navigate to “Downloads”

Getting Started

• Run Revelation Professional Software – Start Menu >> TCS >> RevPro

• Log-In Using Provided Credentials– Username: TCS – Password: TCS

Rev Pro Manual pg 2-2

Page 5: Install Rev Pro 2.4 Using CD Provided During Training –Load CD into Drive & View Contents –Run Setup.exe Using Link on CD Catalog 2006 –Navigate to “Downloads”

Creating a Network & Detecting Controllers

• “New Job” or “Open Job” in File Menu

• “Add” Button in Rev. Job Setup Window

Rev Pro Manual pg 4-1

• Site Intrfc.=>QD1010, Port=>??, “Next”

• Auto Detect Controllers –or– Add Button

Page 6: Install Rev Pro 2.4 Using CD Provided During Training –Load CD into Drive & View Contents –Run Setup.exe Using Link on CD Catalog 2006 –Navigate to “Downloads”

Programming Controllers

• After Auto Detect, from Network Setup– Highlight Desired Controller in List– Click “Program Controllers” Button

• From Rev Pro Job File Window– Programming Menu >> Setup Controller– Select Relevant Controller Model– Remember…. “Read” Before Making Changes

“Write” Before Going to NEXT Menu

“Write” vs. “Write Half”“Load All” & “Save All” Options

Rev Pro Manual pg 4-4

Page 7: Install Rev Pro 2.4 Using CD Provided During Training –Load CD into Drive & View Contents –Run Setup.exe Using Link on CD Catalog 2006 –Navigate to “Downloads”

Programming Example (SZ1031)

Rev Pro Manual pg C-7

Page 8: Install Rev Pro 2.4 Using CD Provided During Training –Load CD into Drive & View Contents –Run Setup.exe Using Link on CD Catalog 2006 –Navigate to “Downloads”

Programming Example (SZ1031) -- continued

Rev Pro Manual pg C-7

Page 9: Install Rev Pro 2.4 Using CD Provided During Training –Load CD into Drive & View Contents –Run Setup.exe Using Link on CD Catalog 2006 –Navigate to “Downloads”

Programming Example (SZ1031) -- continued

Rev Pro Manual pg C-7

Page 10: Install Rev Pro 2.4 Using CD Provided During Training –Load CD into Drive & View Contents –Run Setup.exe Using Link on CD Catalog 2006 –Navigate to “Downloads”

Creating Monitoring Screens

• Create Levels with Background Images1 – Area View

2 – Building View

3 – Floor View

4 – App. View

• Add/Move/Delete

• Define Points

• Copy Icons/Levels

Rev Pro Manual pg 5-1

Page 11: Install Rev Pro 2.4 Using CD Provided During Training –Load CD into Drive & View Contents –Run Setup.exe Using Link on CD Catalog 2006 –Navigate to “Downloads”

Monitoring in Revelation Professional

• Live Monitoring– Application View– Job Graphics Tree

• Other Functions– Changing Setpoints– Alarming– Auto Start– Trending

Rev Pro Manual pg 6-1

Page 12: Install Rev Pro 2.4 Using CD Provided During Training –Load CD into Drive & View Contents –Run Setup.exe Using Link on CD Catalog 2006 –Navigate to “Downloads”

Where to Get Help or Answers

• Rev Pro Section of Training & Reference Manual

• Rev Pro pages at www.tcsbasys.com

• Call TCS Directly – 800-288-9383

Page 13: Install Rev Pro 2.4 Using CD Provided During Training –Load CD into Drive & View Contents –Run Setup.exe Using Link on CD Catalog 2006 –Navigate to “Downloads”

U qu ty yv rvbi i e iwe