Upload
kemalr2601
View
239
Download
0
Embed Size (px)
Citation preview
7/30/2019 Install and Configuration Lync Server 2010 Std
1/21
Step-by-step Microsoft Lync 2010 Consolidated Standard
Server Install Guide
September 15th, 2010 | Tags:Lync Server 2010
As many of you may well know the long awaited public release candidate RTM of Microsoft
Lync 2010 (previously Communications Server 14) is now available fordownload. This
major new release offers a radical difference to the previous architecture and unlike its
predecessors (Communications Server 2007 R1/2 and to a certain degree Live
Communications Server 2005) offers a streamlined and consolidated deployment, great for
smaller scale implementations which are not overly abundant to date.
This guide (update: video version now availablehere) will run through a consolidated
standard edition install (without voice gateway integration, Ill try and come back to this
later), whereby all roles will be deployed on a single virtual machine except monitoring,
archiving and edge rolesyes this is a supported scenario!
So first off Ill run you through some high-level preparation steps/assumptions:
Ive already installed a fresh copy of Windows 2008 R2 Standard on a Hyper-V 2008R2 host, as this is a lab install I have only allocated 2gb of VM RAM (not supported
in production) and a 72gb VM fixed disk (single partition)strangely during theinstall should you choose to install on a secondary partition i.e. D: rather than C: most
of the program files and database(s) end up on C:
Apply all Windows Updates, probably goes without saying, right? Add to your domain (the installation will fail when attempting to deploy on a DC-
see comments below) and login as domain admin or equivalent
Within this guide I have Active Directory Certificate Services deployed for certificategeneration
Now the prerequisites (based upon a Windows 2008 R2 install, 2008 x64 issupported, but unless your organisation has licensing constraints I would strongly
recommend you go down the R2 route)
Add RSAT (only AD DS and AD LDS Tools are required) from within features inServer Manager (used for performing remote schema updates etc.) this will also
prompt you to add the .NET Framework 3.5 feature, you mustaccept this
Add IIS, this is made easier by running this command line:ServerManagerCmd.exe -Install Web-Server Web-Http-Redirect Web-Scripting-
Tools Web-Windows-Auth Web-Client-Auth Web-Asp-Net Web-Log-Libraries Web-
Http-Tracing Web-Basic-Auth
http://imaucblog.com/archive/tag/ls2010/http://imaucblog.com/archive/tag/ls2010/http://imaucblog.com/archive/tag/ls2010/http://technet.microsoft.com/en-gb/evalcenter/ff808407.aspxhttp://technet.microsoft.com/en-gb/evalcenter/ff808407.aspxhttp://technet.microsoft.com/en-gb/evalcenter/ff808407.aspxhttp://imaucblog.com/archive/2011/05/12/microsoft-lync-2010-consolidated-standard-server-video-installation-guide/http://imaucblog.com/archive/2011/05/12/microsoft-lync-2010-consolidated-standard-server-video-installation-guide/http://imaucblog.com/archive/2011/05/12/microsoft-lync-2010-consolidated-standard-server-video-installation-guide/http://imaucblog.com/wp-content/uploads/2010/09/ms-lync-logo.pnghttp://imaucblog.com/archive/2011/05/12/microsoft-lync-2010-consolidated-standard-server-video-installation-guide/http://technet.microsoft.com/en-gb/evalcenter/ff808407.aspxhttp://imaucblog.com/archive/tag/ls2010/7/30/2019 Install and Configuration Lync Server 2010 Std
2/21
7/30/2019 Install and Configuration Lync Server 2010 Std
3/21
A few minutes later the following dialogue will appear. Given my single partition setup, I
choose to accept the default installation directory.
Now you will be presented with a familiar looking wizard that will guide you through the
install process. In my case I have already completed the Active Directory preparation steps
and provided you are logged in with a Domain Admin or equivalent account and your AD is
in good shape this should complete without a hitch (it did in my case!). As per the installation
steps, once this is completed add your chosen admin account to the newly created
CSAdministrator group.
http://imaucblog.com/wp-content/uploads/2010/09/04-lync2010-standard-install.pnghttp://imaucblog.com/wp-content/uploads/2010/09/03-lync2010-standard-install.pnghttp://imaucblog.com/wp-content/uploads/2010/09/04-lync2010-standard-install.pnghttp://imaucblog.com/wp-content/uploads/2010/09/03-lync2010-standard-install.png7/30/2019 Install and Configuration Lync Server 2010 Std
4/21
Head back to the main deployment wizard screen and select the option to Prepare first
Standard Edition Server (top right hand option). This will install a copy of SQL 2008
Express, Lync Server core installation files and create an RTC databaselet this take its
course and once complete youll be presented with the following dialogue.
Next install the Topology Builder via the main deployment screen, when this completes you
gain a green tick to signify a successful install. Now the fun stuff, we need to define our
topology by launching the topology builder via the start menu, as explained earlier Lyncoffers a difference in architecture to OCS 2007 and the Central Management Store (CMS) is
http://imaucblog.com/wp-content/uploads/2010/09/06-lync2010-standard-install.pnghttp://imaucblog.com/wp-content/uploads/2010/09/05-lync2010-standard-install.pnghttp://imaucblog.com/wp-content/uploads/2010/09/06-lync2010-standard-install.pnghttp://imaucblog.com/wp-content/uploads/2010/09/05-lync2010-standard-install.png7/30/2019 Install and Configuration Lync Server 2010 Std
5/21
no exception. The CMS is a SQL database where you publish your chosen topology, this
takes away the dependency for Lync to require the AD for configuration purposes and is
required to complete the installation.
Upon launching the Topology Builder we are presented with three options, choose New
Topology (see below).
A dialogue will ask you to choose a save file/location, Im going to accept the default
location and call the file MyTopology.tbxml. Next you are asked for your primary SIP
domain, Ill be using my test AD domain for this Jacobs.local (see below).
You may notice that should you choose to input anything with invalid formatting, youll beasked to correct the problem and a RED square box will identify the bad string. Click next, I
http://imaucblog.com/wp-content/uploads/2010/09/08-lync2010-standard-install.pnghttp://imaucblog.com/wp-content/uploads/2010/09/07-lync2010-standard-install.pnghttp://imaucblog.com/wp-content/uploads/2010/09/08-lync2010-standard-install.pnghttp://imaucblog.com/wp-content/uploads/2010/09/07-lync2010-standard-install.png7/30/2019 Install and Configuration Lync Server 2010 Std
6/21
didnt choose to add any additional SIP domains. Next give your site a name, Ill use MyLab
(see below).
Next site details, mine are below.
And with this completed you are prompted to open the New Front End Wizard, leave this
checked. Here youll need to define the New Front End pool.
http://imaucblog.com/wp-content/uploads/2010/09/10-lync2010-standard-install.pnghttp://imaucblog.com/wp-content/uploads/2010/09/09-lync2010-standard-install.pnghttp://imaucblog.com/wp-content/uploads/2010/09/10-lync2010-standard-install.pnghttp://imaucblog.com/wp-content/uploads/2010/09/09-lync2010-standard-install.png7/30/2019 Install and Configuration Lync Server 2010 Std
7/21
First of all we need to input the pools FQDN, in my case it will be lync.jacobs.local (Lync is
the name of my server). Ill also be opting for the Standard Edition Server Topology (theyll
be no high availability and an additional SQL Express instance, this will host the user and
application store and will be installed automatically upon publishing the policy).
We are now going to select the features required and therefore destined to be collocated, Ill
be installing Conferencing (without Dial-in, Im not going for PSTN voice integration for this
lab setup), Enterprise Voice and Call Admission Control.
http://imaucblog.com/wp-content/uploads/2010/09/12-lync2010-standard-install.pnghttp://imaucblog.com/wp-content/uploads/2010/09/11-lync2010-standard-install.pnghttp://imaucblog.com/wp-content/uploads/2010/09/12-lync2010-standard-install.pnghttp://imaucblog.com/wp-content/uploads/2010/09/11-lync2010-standard-install.png7/30/2019 Install and Configuration Lync Server 2010 Std
8/21
Ill choose to collocate the Mediation Server (it will be redundant for now, given my choice
to hang fire on voice integration).
Given my single server approach and lack of any need to archive, monitor or federate within
my lab, Ill choose to not select any additional server roles within the next screen.
http://imaucblog.com/wp-content/uploads/2010/09/14-lync2010-standard-install.pnghttp://imaucblog.com/wp-content/uploads/2010/09/13-lync2010-standard-install.pnghttp://imaucblog.com/wp-content/uploads/2010/09/14-lync2010-standard-install.pnghttp://imaucblog.com/wp-content/uploads/2010/09/13-lync2010-standard-install.png7/30/2019 Install and Configuration Lync Server 2010 Std
9/21
I dont need to define my SQL store as my Standard Edition will perform the SQL Express
installation automatically.
Now well need to create a file share, create it locally and ensure the account you are
currently using to run the topology builder has read/write access to this folder. Ill call my
folder and share name LyncShare.
http://imaucblog.com/wp-content/uploads/2010/09/15-lync2010-standard-install.pnghttp://imaucblog.com/wp-content/uploads/2010/09/14a-lync2010-standard-install.pnghttp://imaucblog.com/wp-content/uploads/2010/09/15-lync2010-standard-install.pnghttp://imaucblog.com/wp-content/uploads/2010/09/14a-lync2010-standard-install.png7/30/2019 Install and Configuration Lync Server 2010 Std
10/21
The next screen will ask you for an external URL, if you have a public facing FQDN for this
server, it goes here. On the next screen (specify PSTN gateways, click finish, if you, like me
are not configuring PSTN integration). You will now be taken back to the main topology
builder screen, where you can view a detailed summary of your chosen setup. Click edit
properties on the top right (below New Central Site) as you will need to add a few final
tweaks.
http://imaucblog.com/wp-content/uploads/2010/09/17-lync2010-standard-install.pnghttp://imaucblog.com/wp-content/uploads/2010/09/16-lync2010-standard-install.pnghttp://imaucblog.com/wp-content/uploads/2010/09/17-lync2010-standard-install.pnghttp://imaucblog.com/wp-content/uploads/2010/09/16-lync2010-standard-install.png7/30/2019 Install and Configuration Lync Server 2010 Std
11/21
First, you need to add an administrative URL, in my casehttps://admin.jacobs.localand
select the front end server to install your CMS on (all things being equal you should have one
option here, your previously specified pool FQDN).
You are all set to publish your topology! To do so select this option from the right hand side
of the main topology builder screen.
https://admin.jacobs.local/https://admin.jacobs.local/https://admin.jacobs.local/http://imaucblog.com/wp-content/uploads/2010/09/17a-lync2010-standard-install.pnghttps://admin.jacobs.local/7/30/2019 Install and Configuration Lync Server 2010 Std
12/21
If you followed the guide correctly validation should succeed, click next on the publish
topology wizard.
Accept the front end pool default by clicking next.
http://imaucblog.com/wp-content/uploads/2010/09/18a-lync2010-standard-install.pnghttp://imaucblog.com/wp-content/uploads/2010/09/18-lync2010-standard-install.pnghttp://imaucblog.com/wp-content/uploads/2010/09/18a-lync2010-standard-install.pnghttp://imaucblog.com/wp-content/uploads/2010/09/18-lync2010-standard-install.png7/30/2019 Install and Configuration Lync Server 2010 Std
13/21
7/30/2019 Install and Configuration Lync Server 2010 Std
14/21
7/30/2019 Install and Configuration Lync Server 2010 Std
15/21
Choose step 2 to install Lync Server Components.
You may be asked to restart, should this occur click finish and manually restart your server.
After logging back in re-execute the deployment wizard and click step 2 from within Install
or Update Lync Server System for the second time, it will automatically resume from where
it left off. With this complete, click finish.
http://imaucblog.com/wp-content/uploads/2010/09/24-lync2010-standard-install.pnghttp://imaucblog.com/wp-content/uploads/2010/09/23-lync2010-standard-install.pnghttp://imaucblog.com/wp-content/uploads/2010/09/24-lync2010-standard-install.pnghttp://imaucblog.com/wp-content/uploads/2010/09/23-lync2010-standard-install.png7/30/2019 Install and Configuration Lync Server 2010 Std
16/21
Step 3 is where certificates are requested and assigned to the server and both internal/external
web services. Click request (see below).
The following dialogue will be presented, choose to send the request immediately to anonline certificate authority (this will submit via AD Certificate Services).
http://imaucblog.com/wp-content/uploads/2010/09/26-lync2010-standard-install.pnghttp://imaucblog.com/wp-content/uploads/2010/09/25-lync2010-standard-install.pnghttp://imaucblog.com/wp-content/uploads/2010/09/26-lync2010-standard-install.pnghttp://imaucblog.com/wp-content/uploads/2010/09/25-lync2010-standard-install.png7/30/2019 Install and Configuration Lync Server 2010 Std
17/21
Select your local CA via the detected server list, click next until you see the option to specify
a friendly name, Ill use Lync.
Choose friendly organisation names, country, state/city and click next. You now need to
configure and accept subject alternate names (SAN)this is where a single certificate can
handle multiple common names or domain names. In my case Ill accept my locally
configured SIP domain. You can add additional names where you have a public facing
FQDN, click finish to execute certificate commands. The assign the requested certificates
(see below).
http://imaucblog.com/wp-content/uploads/2010/09/28-lync2010-standard-install.pnghttp://imaucblog.com/wp-content/uploads/2010/09/27-lync2010-standard-install.pnghttp://imaucblog.com/wp-content/uploads/2010/09/28-lync2010-standard-install.pnghttp://imaucblog.com/wp-content/uploads/2010/09/27-lync2010-standard-install.png7/30/2019 Install and Configuration Lync Server 2010 Std
18/21
Upon completion the following screen will be presented.
Gentlemen start your services, or just click step 4! If you want to verify everything went A
okay there is an option to launch services.msc. Looking good!
http://imaucblog.com/wp-content/uploads/2010/09/30-lync2010-standard-install.pnghttp://imaucblog.com/wp-content/uploads/2010/09/29-lync2010-standard-install.pnghttp://imaucblog.com/wp-content/uploads/2010/09/30-lync2010-standard-install.pnghttp://imaucblog.com/wp-content/uploads/2010/09/29-lync2010-standard-install.png7/30/2019 Install and Configuration Lync Server 2010 Std
19/21
Lets launch the Lync Server Control Panel via the start menu and enable a test user,
provided you installed Silverlight and youre A records resolve in my case,
admin.jacobs.local you should be asked to authenticate with your CSAdministrator admin
details.
Within top actions enable a user for Lync Server. (see below)
http://imaucblog.com/wp-content/uploads/2010/09/32-lync2010-standard-install.pnghttp://imaucblog.com/wp-content/uploads/2010/09/31-lync2010-standard-install.pnghttp://imaucblog.com/wp-content/uploads/2010/09/32-lync2010-standard-install.pnghttp://imaucblog.com/wp-content/uploads/2010/09/31-lync2010-standard-install.png7/30/2019 Install and Configuration Lync Server 2010 Std
20/21
Finally you will need to create a SRV DNS record for your new Lync Server, without this
your Lync client will be unable to locate the server location. To create, access your DNS
manager and right click the Forward Lookup Zone for your SIP FQDN. Then click other new
records and Service Location (SRV), complete using your own server settings as per the
illustration below.
http://imaucblog.com/wp-content/uploads/2010/09/34-lync2010-standard-install.pnghttp://imaucblog.com/wp-content/uploads/2010/09/33-lync2010-standard-install.pnghttp://imaucblog.com/wp-content/uploads/2010/09/34-lync2010-standard-install.pnghttp://imaucblog.com/wp-content/uploads/2010/09/33-lync2010-standard-install.png7/30/2019 Install and Configuration Lync Server 2010 Std
21/21
All things being equal you should now be able to install and login with your Lync client by
using the corresponding sign-in address, give yourself a pat on the back!
http://imaucblog.com/wp-content/uploads/2010/09/35-lync2010-standard-install.png