INSIDE THIS ISSUE · someone to hire them and give them exposure to the industry. What they were given while they were being paid was icing. There were probably books, catalogs and

January 1995Volume 66, No. 1

$5.00

INSIDE THIS ISSUE•

STRIKING APPLICATIONSPAGE 32

•HEADACHES & MORTAR

FILLED FRAMESPAGE 34

•STEP IN TIME

PAGE 40•

MINI-SECTION•

REAL TIME SERVICEWITH EDI

PAGE 44•

DISTRIBUTORGUIDE

PAGE 47

INSIDE THIS ISSUE•

STRIKING APPLICATIONSPAGE 32

•HEADACHES & MORTAR

FILLED FRAMESPAGE 34

•STEP IN TIME

PAGE 40•

MINI-SECTION•


PAGE 44•

DISTRIBUTORGUIDE

PAGE 47

Click on the article you wish to read

Click on the article you wish to read

t's time for you to cast yourballot for the locksmith

industry's TOP 100 products!In this issue you will find a Top100 ballot ready for your votes.See the inserted ballot, fill itout and send in your votestoday. Here's your chance tochoose the best productsmade for the locksmith!

ight now, today, with a computer and a modem,you can contact The National Locksmith online!

We have taken an account with America Online(AOL). So now you can send us electronic mail fromthe comfort of your own computer, using a localaccess number near you. In fact, even if you have adifferent service such as Compuserve or Prodigy,you can still send us E-mail through the Internet.

First let me tell you what we will NOT be doing onAOL. We will not be putting the magazine's contentsin the system. That's to keep the public fromreading the magazine. So for security reasons, youwon't be able to read The National Locksmith onyour computer. Also, we will not be offering a greatdeal of technical assistance on the system, again forsecurity reasons.

However, there are many interesting things we cando together with your computer and your modem.First, is electronic mail. When you type a note andsend it through E-mail, it will instantly zap into mycomputer's mailbox here at National.

What might you want to use this feature for? Youcan send letters to the editor, instantly and almostfor free using E-mail. You can give us feedback onany article or my Commentary. You can sendTechnitips by E-mail. You can request furtherinformation about an advertisement by E-mail. Youcould even order a book or product from us thisway, giving us your credit card number.

For security reasons, when requesting to orderbooks from us or advertiser information, you mustalso give us your subscriber number which appears

on your magazine label, starting with "1P." Torequest information on ads, you won't even have touse the Rapid Reply card anymore. Just give us yoursubscriber number, tell us the issue month and thecircle number. We'll process your request as usual.(Example: December 1994, circle number 204.)

Although you and I can E-mail each other quicklyand cheaply no matter which online service you use,there are some advantages to you if you use AOL asyour online service. Soon, we will publishinformation in the magazine on how you can joinwith our staff and writers in live online forums, atleast once a month. That means each of us can besitting at our own computers using a local numbernear our own location. But we can all be talkingabout locksmithing in the privacy of a passwordprotected room. In next month's Commentary, I'llgive you more information on that. Imagine sittingin your office and chatting live with Dave Mc Omieand Dale Libby about safe opening.

hat does it all cost? We charge you nothing.AOL offers a 10 hour free trial for any type of

computer you may own or buy. After that, their costis $9.95 per month, including five free hours andunlimited E-mail at no extra charge. Extra hours are$2.95 per month. Call them today for your free trialpacket...800-827-6364.

You can get total news, weather, sports, and anunbelievable amount of information from AOL. Andit is amazingly easy to use.

Use one of the electronic addresses printed above. Ifyou already have an E-mail address, please send mean E today with that address, your name andsubscriber number. I'll put you in my electronicaddress book. And when we have a locksmith newsflash, I'll be able to alert you immediately. Imaginegetting the latest locksmith news instantly right onyour own computer! Get on line and send me yourE-mail address as soon as you can.

Have a computer? Talk to

The National Locksmith Online!

CCOOMMMMEENNTTAARRYY

Marc GoldbergEditor/Publisher

January 1995 • 5

America Online: NATL LOCKUse the above address if you are on AOL.

Internet: [email protected] the Internet address if you are not on AOL.

I

R

W

Making It RightDear Marc:

The article about the CorbinRusswin CK4400 Series published inNovember (The National Locksmith,page 18) contains an erroneousstatement with regard to CorbinRusswin’s relationship with Yale. Inthe article it was stated CorbinRusswin was purchased by Yale. Thisis incorrect. To clarify, CorbinRusswin was purchased by WilliamsHoldings in January 1994 and isoperated as an independent whollyowned subsidiary.

Paul DauphinMarketing Manager

Corbin Russwin

Reader Miffed ByLegislation

Dear Marc:Over the past few months I have

noticed that The National Locksmithhas turned pro-legislation, as in the ‘94November issue under Viewpoint. I’mconcerned with such comments thatcould be interpreted as those thatoppose legislation have something tohide. Maybe it should be asked whatis in it for the ones who wantlegislation? Could it be that someonemay get a big shot title like LocksmithDirector and control the destiny oflocksmiths across the U.S.A.? Or, justmaybe it’s a way to get rid of the littleguy so the big ones can control themarket. It sounds like greed andjealousy to me! Oh, you took offenseto that? Well, so did we.

I wonder where the news crews gotthe ideas for their sting operations.This could be great to boost the

legislation issue, don’t you think? IfI’ve heard it one time I’ve heard it athousand times, we need legislation toprotect the public. Believe me, that’swhy we already have judges andcourts!

And here’s the best one of all: Nowwe must have legislation to protect usfrom other trades that have passedlegislation to restrict us fromperforming our services.

This mess of legislation is beingforced down our throats by our socalled fellow locksmiths. If you reallywant to see how they stand, then let’sall boycott the nation for one week orlonger and refuse to do any lock workat all!

This would be a great way to seewho is friend and who is foe! It is alsoa great deterrent for those law makersto be a little more careful andrespectful when passing laws thatencroach on our livelihoods! How longdo you think a nationwide strikewould last before the public andgovernment would come crying to usfor help?

As a member of The NationalLocksmith Magazine and as aneducator in locksmithing, I’m veryconcerned with why it is that thelocksmithing schools across thiscountry have not been better informedon how legislation, if passed, willaffect our students? I have looked atseveral other sources for informationon legislation, outside the people whodrafted it. And it seems that schoolsare not being informed of legislation,nor are they being prepared formeeting any governmental demandfor changes. Is this an oversight or isthis intentional?

Just think a minute how many ofyour subscribers and other locksmithorganization members are referred toyou from the locksmithing schoolsacross the U.S.A.! Believe me when Itell you, I take offense to such

comments so loosely used that wouldsuggest, in the Viewpoint com-mentary, as educators we are notinspiring or encouraging studentswith the legal or moral values oflocksmithing. Over the years thou-sands of locksmiths got theirbeginning through our doors first andhave served our country well. Neverthe less it seems some locksmithsseem to forget how they got started inlocksmithing!

Never would I believe that TheNational Locksmith would side withsuch a dead head issue that has tornother organizations apart. So goodluck on your new quest of fame andglory! I hope it’s not the end of thefinest trade journal ever written. In thepast I always looked forward toreading the magazine and sharing itwith the students and encouraged thestudents to become members.

But if this is the new direction ofThe National Locksmith I want no partof it!

Steven GlassTennessee

The November 1994 issue of TheNational Locksmith included View-point, a reader opinion column.Viewpoint, which is to run on a regularbasis, is a forum for our readers’ toexpress themselves and is not necessarilythe opinion(s) of The NationalLocksmith. Following are responses tothat month’s column.

Reader QuestionsViewpoint

Dear Marc:Art Shoob’s editorial in your

November issue, concerning lock-smith legislation, inspires severalcomments. Art is right - we do needsome sort of legislation to protect usfrom restrictive regulations such asDade County’s requiring a mechanic’slicense to work on auto locks.

LELETT TTEERRSSComments,

Suggestions and

Criticisms

The National Locksmith is interested inyour view. We do reserve the right to editfor clarity and length. Please address yourcomments, praise, or criticism to Editor,The National Locksmith, 1533 BurgundyParkway, Streamwood, IL 60107. All lettersto the editor must be signed.

6 • The National Locksmith

Unfortunately, “Big Dawgs,” like Art,also see legislation as a means toprotect themselves from people in a“...Volkswagen going from car dealerto car dealer....”

Although I actually drive aPlymouth Voyager, Art’s talking aboutme.

It’s time for a reality check, “BigDawgs.” There’s nothing wrong withstarting small and working hard tobuild a business. There’s nothingwrong with going out to look for workon days when the phone doesn’t ring.And it’s just smart to use an affordablevan to avoid killer debt.

I offer my customers excellentwork at an excellent price. I suspectthat’s how the Big Dawgs got big.

Art’s attitude toward small indepen-dent locksmiths makes me want tothink long and hard about invitinggovernment into the running of mybusiness.

Don MohanNew York

Networking The AnswerDear Marc:

I take exception to a recent

editorial (Viewpoint, The NationalLocksmith , November 1994) thatblamed older locksmiths for holdingback what they taught employeesbecause they feared being shown upor felt they were educating their owncompetition.

To quote the article:

“After all, look at the one’s outthere who call themselves locksmiths.We taught circumstance, it is ourresponsibility to correct this. And itcan only be done through legislation.”

First of all, we did not teach them.They could not, did not, or would notlearn. Their first blessing was forsomeone to hire them and give themexposure to the industry. What theywere given while they were being paidwas icing.

There were probably books,catalogs and technical bulletins attheir disposal. People who learn do iton their own. They don’t have it donefor them. They jump at everyopportunity within their grasp. Everylocksmith association I know,emphasizes education, pusheseducation, and presents educationalopportunity. Distributors and

associations alike offer low-costseminars on a regular basis. Tradeshows abound. I, personally, havenever attended an association meetingwhere I did not learn something. Ihave never taken or re-taken a classwhere I did not learn something new.

We need legislation all right, butthe legislation should be in the form ofrequiring membership in a recog-nized association, plus legislationempowering associations. Associa-tions know what should be required oflocksmiths and are much morecapable of regulation than arepoliticians.

In a recent comment, aboutlocksmiths in Dade County Floridahaving to be licensed as automechanics you said: “I personallyhave never heard of a dumber law inmy life.”

This is the kind of legislationpoliticians write, and it puts thelocksmith industry on notice that alittle networking should take place ifwe are all going to dodge the“legislative bullet.”

The profession of locksmithing isbecoming more and more technical,

January 1995 • 7

To place an order or get current pricing,

call (630) 837-2044.

The Lure of the LockItem #LURE

This hardcover book was compiled in1928. It is the most complete history oflocks, keys and safes that we have everseen. The book features dozens anddozens of beautiful photographs onancient through modern locks. The Lureof the Lock illustrates for you thedevelopment of security from ancientlocks up through the modern day. As alocksmith you’ll treasure this 250 pagehardbound book showing the proud andfascinating history of locks.

The quality of the photographs and ofthe printing of this book have to be seento be believed. We have never beforeseen its equal. Until recently, only alimited number of collectors knew ofThe Lure of the Lock. Now you can jointhe lucky few who already prize a copy ofthis gem. Please order your copy now.Every locksmith who sees a copy of thisbook, will want one for his own.

InterchangeableCore Cylindersby Don O’ShallItem #ICB-1

Covers all this…• Best/Falcon/Arrow/Eagle (A2)• Best A3• Best A4

• Corbin X Removable Core• Corbin Z Removable Core• Russwin Removable Core• Emhart System 70 Removable Core• Sargent Removable Core• Schlage, Yale, Lockwood• Medeco Removable Core

Service With a Smile

by Sara ProbascoItem #SWS

To tickle the funnybone of anyone ina service oriented business. ServiceWith A Smile accounts the humorousescapades of Don and Sara Probasco. You’ve beenentertained by Sara’s monthly column, now you can havean entire collection of her finest tales.

To place an order or get current pricing, call (630) 837-2044.

Click here for more informationClick here for more information

It’s not safeunless it’s

Schwab Safe.

01090

2030

4050

60

7080


Lockmasters has a 44 year history of training security professionals.

which means that fewer and fewerindividuals will measure up to keepingabreast of the industry. Something hasto be done to prevent them fromlowering the standard of the industry.

There are over one-hundredlocksmith associations in the U.S.,which means that every locksmithwould have reasonable access to morethan one. This could act as a deterrentto harassment.

I whole-heartedly believe somekind of regulation is in order, but Isure would like to see it come in theform of self-regulation first.

R.W. Staples, CMLWashington

Legislation, Like It Or NotDear Marc:

Here’s a few observations I’vemade that may interest you.

1. Regarding T.V. news “Sting”operations on unsuspecting lock-smiths, I can’t defend the locksmithfor not being responsible enough tocheck identification but, isn’t the newsstation guilty of conspiracy to commit

a fraud? Or after the car/house thatthey allegedly own is open andcoerced the locksmith to open, arethey not an accessory to the crime?Maybe even more guilty as they“masterminded” the attempted theft.

2. I talked to Illinois State Repre-sentative Cal Skinner, Jr. and askedhim why he voted against the Illinoislocksmith licensing act. His majorreason for changing from a yes vote toa no was that a convicted felon couldhold a valid license, i.e. rapist, childmolester, embezzler or even someonefound guilty of a violent crime. I seehis point. Would you want John Gacyto knock on your door to change yourlocks?

3. I heard from a reliable sourcethat the Illinois Burglar and FireAlarm Association is trying to haveanti-pilferage devices (Detex, AlarmLock, etc.) placed under the alarmlicensing act, making it illegal forlocksmiths to install or service thesedevices without holding an alarmlicense. Their claim is that it is anelectrical device that sounds an alarmwhen activated and therefore fallsunder the alarm licensing act.

Without the licensing of lock-smiths, there is no definition of ourscope of work, and it could soon beunlawful for us to service thosedevices. Whether the I.B.F.A.A. isactively pursuing this or not is not theissue, if they did we could be “lockedout” of this part of our business. Chalkup one more reason for licensing.

Michael PhilpotIllinois

Editor’s Note:Michael, Thank you for your

comment. These same observationshave been and are being made bylocksmiths from around the country.Because legislation in Illinois is close toa reality, I ’ll let Kathy Zaniolo,President of the Greater ChicagoLocksmith Association, respond. Whileher response is focused on the events inIllinois, the issues are common to alllocksmiths in states facing legislation.

Dear Marc:Since I’ve been at the front of the

legislative battle currently beingwaged in Illinois, I would like to thankMr. Philpot for being interestedenough to contact his representative.We want all Illinois locksmiths to

contact their representatives on ourpending licensing bill.

The T.V. Stings, we have been toldare not illegal because the media hasthe permission of the owner. So, nocrime is being committed. Fortu-nately, however, the last Sting mayhave actually helped our causebecause they went after the Governor,asking why he had not supported ourbill.

Unfortunately, Mr. Philpot isapparently not familiar with our bill, orhe could have informed his re-presentative that any crime that coulddirectly relate to locksmith servicewould be grounds to refuse a licenseby the Dept. of Rules and Regulations.It will be up to the Department todetermine if a crime would be related.I feel sure that rape, child molesting,etc. would fall into that category whenthey consider the locksmith is givenaccess to homes as the normal courseof his/her business.

Finally, the Alarm Law is written insuch a way as to eliminate thelocksmith from touching any devicethat emits a sound that requires aresponse. A year ago our associationled a campaign to have the wordingchanged. We lost also. The alarmindustry refused to consider anexemption for locksmiths becauseanyone can be a locksmith.

I am very glad Mr. Philpot agreeswe need licensing. The associations inIllinois realized this and bandedtogether to form The Allied Lock-smiths for Illinois. The purpose of thisassociation is for the express purposeof handling the legislative needs ofIllinois locksmiths as the majority ofthe locksmiths have determined themto be.

I would like to urge Mr. Philpot andany other concerned locksmith inIllinois to get involved, stay current,get informed, and join a localassociation or the Allied Locksmithsfor Illinois. Your associations areworking hard for all locksmiths. Whynot join in and lend them yoursupport?

Kathy Zaniolo, CPLPresident,

Greater Chicago Locksmiths Assn.


The Ultimate Safe Opening Collectionfrom Dave McOmie and The National LocksmithItem: USOC-1

This monster collection of safe opening dataruns over 1,000 pages of pure information. Youget drill points, relocker drill points, hard platespecs, and step by step photos on almost everysafe you are ever likely to encounter in yourcareer. Included are containers from virtuallyevery manufacturer and they run the gamut fromregular safes, all the way up through rated safes,as well as the ultra high security.

Learn about the tools you need. We revealevery opening technique known to man inextraordinary detail, with photos, illustrationsand easy to read text. You’ll also know of thepossible pitfalls and errors on each opening, andyou’ll avoid making those mistakes!

Never in history has such a completecollection of safe opening information beenavailable in one place!

(Note: This collection is comprised ofcollected NSO materials. NSO members willalready have all or part of this information.)

To order, or for current price information, call(630)837-2044 or fax (630)837-1210 and ask foritem #USOC-1.Click here for more informationClick here for more information

HPC, Inc.Designing

Excellence andManufacturingQuality since

1956

I would occasionally get calls to work on the LaGard digitallock about once a month. Last week I had six calls in fivedays. It was time for a reality check as well as time to form anew concept for working on these locks. (See photograph 1.)

First, I was concerned with how to determine the handingof these keypad activated locks. After determining thehanding, I wanted to know the position of the bolt, how itswung, and the correct drill point and measurements to use.By the second lock, I had found an indicator that makesworking on these locks very easy.

Illustration two shows the classic LaGard theory of lockhanding. I do not get it. I think that the handing diagramsshould be labeled:

1. Right Hand, Left Swing2. Right Hand, Right Swing3. Left Hand, Left Swing4. Left Hand, Right Swing5. Vertical Up, Left Swing6. Vertical Up, Right Swing7. Vertical Down, Left Swing8. Vertical Down, Right SwingPretty silly, isn’t it? Actually, by using my system, you do

not have to know anything about the handing of the lockbefore you work on the safe. The safe lock reveals thehanding and the drill point. The secret, soon to be revealed,is the title of this article - “The Cable Channel.” (Seephotograph 3.)

Before disclosing the neat trick, let us go through ahypothetical opening sequence, actually a compilation ofseveral locked safe door services condensed into onerepresentational opening.

T here are three general reasons for a lockout; Thekeypad is broken or missing (including dead batteries), thecustomer has tried to change the combination himselfwithout understanding how to do it correctly, or some of thelock IC chips are defective or fried.

If the keypad is not working, change the batteries. Waitfive minutes and try again. If this does not work, the safe willhave to be drilled.

When the keypad is missing or physically broken, it ispossible with a few tools and an extra keypad to input thecombination to the existing lock. The tools that you will needare: 1. The LaGard crimping tool (Black Dot Die) (See

photograph 4.)2. An 8-pin connector3. A crossover 8-pin connector coupler4. A working LaGard Key Pad

January 1995 • 9

3. The cable channel on the bottom of the lock. Noticethe dimples, the attack points for drilling.

1. LaGard keypad mounted to safe door with 12 buttonkeypad.

R.H.

LA GARD INC.TORRANCE, CA

MADE INUSA

L.H.

LA GARD INC.TORRANCE, CA

MADE INUSA

2. Conventional handing of the LaGard DigitalSwingbolt lock.

by Dale Lib

by

The secrets of the LaGard Digital Swingbolt

lock are exposed. Drill hole placement

is now a snap.

CableChannel

http://www.laserkey.com

All these tools and connectors canbe purchased through Lockmasters.Here is a brief description of how it isdone. First, cut off and strip the wirehanging from the safe and install an 8-pin male connector. (See photograph 5and 6.) Plug this into the crossoverconnector and plug the end of theworking keypad into the other side ofthe connector. Install your bunnybatteries and wait for five minutes.Then input the supposed combination.If the combination has not beenchanged, the safe lock will open. The

keypad signifies this by chirping threetimes. (See photograph 7.)

It is important to insert the wirescorrectly into the connector. I use theOrange wire as an indicator because itis easy to see. With the connector up,I put the Orange wire to the right sideof the plug before crimping. The totalcolor coding can be seen in illustrationeight. If, after trying this the lock doesnot open, it is again time to drill.

If, the keypad has a LCD readoutand/or a delay, or the pad will not take


5. The cable has been cut before attaching male 8-pinconnector.

6. Using the AMP tool to connect the 8-pin connectorto digital lock.

4. Amp crimping tool, crossover 8-pin connector with keypad wire.

National Safeman’sOrganization (NSO)One Year Membership

The NSO (National Safeman’sOrganization) is dedicated toteaching you all about the field ofsafe work. your membership fee will bring youhundreds of pages of safe opening details and drillpoints.

Included FREE with your membership is DaveMcOmie’s Guide To Safe Opening Volume 5, a quarterlynewsletter called The National Safeman, quarterlytechnical bulletins called McOmie Files, a membershipcertificate, an ID card and a $10,000 Safeman’s Bond.Make profits in safe work, join today.

To place an order or get currentpricing, call (630) 837-2044.

NationalLocksmith

Automobile Association

(NLAA)One Year

MembershipThe big problem in

automotive locksmith-ing is the tremendousamount of informationyou need to have at youfingertips. Codelocations, service

procedures, key blank numbers,lock parts, linkage types, opening

methods…the list is virtually endless. Tomake matters even worse, this information is constantly

changing. That’s why you need to join the National LocksmithAutomobile Association (NLAA).

Here’s what you get when you join the NLAA: One yearmembership, frameable Membership Certificate, NLAA Photo IDCard, $10,000 Membership Bond for Automotive Work, asubscription to our monthly newsletter on challenging cars, accessto the NLAA Car & Code Hotline and a coupon good for $150.00off code books from The National Locksmith.

To place an order or get current pricing,

call (630) 837-2044.


Installation Tools

The Professionals Choice


numbers, it is again, time to drill.There is no magic way to fix any partsof this lock. I explain this fact to thecustomer, that if the lock or keypadfails all attempts to open with theabove maneuvers, it is time to drill,and that means a totally new lock andkeypad. Nothing can be repaired,nothing can be saved. (You mighthave some use for extra parts, but thecustomer will not!)

Just an added note. If the lock canbe opened without drilling it ispossible to reprogram the LaGardlock without knowing the existingcombination. There is an overridecode on a tag on the back of the lock.If you can see this, then you can resetthe combination to 5-5-5-5-5-5. If youcan get the safe open without drilling,and the slip of paper with the numberis missing, there is a techniquepublished in the NSO’s NationalSafeman newsletter that lets you resetthe combination by shorting twoterminals on the combination lockprinted circuit board IC Chip.

Here is the way I determine thehanding of the lock. Remove the dialby either pushing up or by removingthe battery compartment plates touncover two screws that hold thelarger Delay keypad to the safe. Afterremoving the keypad, just look downthe hole. You will see the cablechannel and the direction the cable isgoing, the locking bolt is opposite ofthe direction of the cable.

For example, if the cable goes tothe right, the lock is a right handedlock with the bolt to the left of thecable hole. If the cable goes up, thelock is handed vertical down. If thelock had not been retrofit, it is harder

to see the actualcable channel, butby removing the cable flush and usingan otoscope, the correct handing caneasily be determined.

The next step is more radical. Evenif we now know the hand of the lock,we do not necessarily know the swing,and thus, not the exact placement ofthe opening hole and the exactplacement of the solenoid. Again, aflash of insight about determining thismade me laugh with delight at thesimpleness of this heretoforecomplicated and often wronglydetermined task.

If we are going to drill this lock, weare going to DRILL this lock. Afterdetermining the hand of the lock (RH,LH, VU, or VD), pull out theremaining cable from the spindle orwire hole (Yes, we are assuming thelock is not remotely mounted butunder the keypad), and drill into thelock case with the largest drill that willfit the spindle hole.

Once we penetrate the lock case,we can see a cavity towards the lockbolt. There is an upper and lower hole

we can look through with an otoscopeor RA Borescope. What we arelooking for are traces of two smallwires that go to the solenoid thatactually keeps the lock swing boltlocked.

For example, we have determinedby using the cable or channel that thelock is right handed (bolt to the left)as we look at it from the outside of thesafe. We then drill a 5/16” hole (orwhatever) down the spindle hole intothe bottom of the lock and slightlyinto the case. We look into our holeand see a wire (or wires) on thebottom of the hole. This means thatthe solenoid is located on the bottomof the lock. We have our drill point.

The correct measurement to drill it1-1/4” toward the bolt, and 1/4” down.If the wires were on the top of the lockas seen through the spindle hole, wewould drill, again, 1-1/4” to the left ofdial hole center and 1/4” up. Thisposition puts us at the tip of thesolenoid. Once we drill through thelockcase (at one of the includeddimples on the underside of the lock)we will see the end of the solenoid.(See photograph 9.)

We now have two choices. Pry itback and turn the opening handle, ormore simply just continue drillinguntil the solenoid is fragments. Thesafe can now be opened by turning thehandle forcing the swingbolt to theopen position.

This opening works well on safeswithout glass plates. If a glass plate ispresent, then side drilling is indicated.Open LaGard Swingbolt Lock andReally Prosper!

January 1995 • 11

7. Setup for opening safe, keypad attached to doublefemale connector which is now attached to the safewire.

8. Color coding for the correct attachment of the 8-pinconnector before crimping in the AMP tool.

9. Inside of drilled swingbolt lockbefore I discovered the correctmeasurement of 1-1/4” towardbolt and 1/4” toward the solenoid.


NNEEWWSSMAKMAKEERRSSNew Products and

Industry News


New DoorKingReceiver/Transmitters

DoorKing has added theModel 1514B programmablereceiver to its popular line ofwireless high security accesscontrol products. In addition,the company now manu-factures their own l ine ofhand held high securitytransmitters.

The 1514B receiver isdesigned for outdoor appli-cations and can be used as astand alone device, or pro-grammed to output in Wie-gand format. The receiver willstore up to 16,000 uniquetransmitter codes, and up to10 facility codes. When usedwith multi-button transmit-ters, the 1514B can beprogrammed to recognize aparticular transmitter button

al lowing two or threereceivers to be placed sideby side without the fear of“phantom” receiver oper-ation. The 1514B alsofeatures a block codingprogram, which allows easyprogramming of al l trans-mitters in a single shortprogramming sequence. Thisel iminates the need tophysical ly activate eachtransmitter so that the

receiver can “learn” its code,a procedure that is commonin other systems of this type.

For FREE InformationCircle 224 on Rapid Reply

National Safe &Lock ExpandsProduct Range

Following a lengthy marketsurvey of the industry,National Safe & LockCompany is expanding itshome and office safe line toinclude a full range of gunand wal l safes. It is alsoadding new locking devicesto its laminated padlock line.

Gun safes are available inthree different sizes including4-gun, 8-gun and 18-gun.The safes reflect the samesuperior finish as the “Hos”range and have spatter paintfinish, sea gray color, fasciaplate and combination lock.The wall safes are available intwo different sizes, each witha t i l ted f lange for easymounting and/or installation.

Added to the padlock lineare single and double lockingbrass and laminatedpadlocks, combination anddigital padlocks, heavy dutybrass padlocks, discuspadlocks, cam locks withtubular or regular keys,drawer locks with round orrectangle plate, glassshowcase sliding door locksand key tags. Addit ionalproducts wil l join the l inelater. All products are blistercarded and are competitivelypriced. Color brochures areavai lable to enhancemarketing produ cts.


Best Keys From JetThe “TE” (1A1TE1) keyway

has just been added to Jet’s“SILVER LINE.” Severalmonths ago, the “TD”(1A1TD1) was released andare currently available fromtheir distr ibutors. Theaddition of the “TD” and “TE”keyways brings to theLocksmith, over thirty fivevariations of most all the keyblanks for Best locks.Included in those variationsare the extra long (5/16”)blanks required for a numberof special Best locks andpadlocks. Keyways availableare, A through R, TB, TD andTE.

All blanks come incised,“DUPLICATION PROHIBI-TED,” exactly the same asthe original manufacturer’sstandard. In addition, underJET’S Personaline program,they offer at no die charge,several standard incisingssuch as “U.S. GOVERN-MENT DO NOT DUPLI-CATE.” They also inciseeither a Locksmiths shopname or an end users suchas Universities, Hospitals,etc. names, logos, etc., at aslight additional cost.


Master Lock AddsEntranceHandles/Leversets

Four new handlesets - theKent, Monticello, Old Colony

and St. George, and two newleversets - the Stratus™ andParis™ - have been added tothe Master Lock line of highsecurity door hardware.

The Kent uses a sleek,streamlined design thatcomplements contemporary-style homes. The Monticellohas a classical and elegantflare, while the Old Colonyfeatures a traditional design.The St. George is a morestriking handleset that restson a rectangular base. Forsuperior resistance totarnishing, flaking and pitting,all Master Lock Handlesetscome with the Durashine™finish at no extra cost, and afull 10-year finish warranty.

The elegant Paris leversweeps del icately into agraceful curve and theStratus lever features and “L-shaped” design. Both leversmeet the accessibi l i tyrequirements of theAmericans with DisabilitiesAct, while the Stratus alsomeets certain fire codes.


Addalock PadlockProtector

Padlocks are no longer asecurity device. Criminals andthieves have known for yearshow easy it is to break anordinary padlock. Addalock

Continued on page 14

padlock protector shieldsyour padlock from destruc-tion. Your padlock cannot becut, hacksawed or ham-mered. Addalock works inconjunction with all locks,padlocks or latches. Itimproves your security bymore than 10 times while stillallowing the key holder easyaccess.


DynaLock #9300Door Cord

DynaLock Corp. intro-duces the #9300 Series DoorCord.

The compact, low profile#9300 Door Cord provides

an economical means totransfer power from the doorto the door frame.

The 16” long armoredcable affords excel lenttamper protection for internalwires and may be ordered tomatch popular architecturalfinishes.


Infogard S10 ByInfographicSystems

Infographic Systems hasintroduced the Infogard S10small access control system

for use with Magnetic Stripe,Wiegand, or Proximity cardsor with keypad only.

The new low cost systemis based on a standaloneMaster Card Reader withkeypad and LCD display, towhich seven slave readersand two printers can beconnected by a single multi-drop cable. All the readersare programmed from theMaster reader offer ingfacilities normally found onlyin PC-based systems. Thesystem can handle up to1,000 users, and store up to2,400 transactions, and canbe connected to any of theInfographics larger systemproducts.


Securitron UpdatesKey Switch Family

Securitron announces al ine of key switches withbroad applications to thesecurity industry.

The MK series allows fieldintroduction of any US made1-1/8” or 1-1/4” mortisecylinder (regardless of cam).The key switch can thereforebe integrated into the facilitykeying system currently inuse. Switch output is 5 AmpsSPDT (DPDT optional); springloaded momentary oralternate action. A bi-color12/24 VDC LED is includedand the unit if furnished on astainless steel single gang ornarrow sti le key plate.Optionally, a second switch


Continued from page 12

Manipulation Home Study Courseby Robert SievekingItem #MAN-1

Our home study course guides you on step-by-step process,teaching you everything there is to know about manipulation.

When you have learned this skill, you will be able to openlocked safes by feel and touch alone! Manipulation allows you

to open the combination lock without drilling, and withoutdoing any damage at all to the safe.

With our Manipulation Home Study Course you learn atyour own pace, in complete privacy. After each step, you take

a test to measure your understanding!

The Best of Dale Libbyby Dale Libby

Item #DALE

This book includes the best articles written by Dale Libby overthe course of many years, going back well over ten years! Now youcan have this terrific collection of safe opening articles, automotive

articles, and more. These are the articles that started the safeopening revolution. Now you can have them all complete, under

one cover! Order your copy today!• Sentry Hardplate Info! • 135 pages, tons of photos! •Contains over 50 chapters! • Learn from the master!

• Covers safe troubleshooting.


Dave McOmie on Gun Safes

by Dave McOmieItem #GS-1

Need a drill point orrelocker drill point on a gunsafe? Then this is THE bookfor you, with superb photosand precise information ongun safes made by Amsec,

Blue Star, Browning,Cannon, Centurion, Cobalt, Fort Knox, Frontier,

Gardall, Gold Coast, Goldfield, Granite, Hall’s,Kodiak, Liberty, Treadlok, ValueLok, Winchester

and Zanotti. PLUS, Dave has included an invaluablesection on how to defeat the most popular locks

currently on the market, both mechanical andelectronic. Mechanical locks include: Ilco P67;

LaGard 3330; S&G 6730. Electronic locks include:Amsec KPL-100, KPL-2000, ESL-10; LaGard

Swingbolt, Old-Style 33E, New-Style33E, S&G 6120.This is the first book in a brand new series, in which

each volume will be dedicated to a particular type ofsafe. This book is on gun safes. The next one will be

on vault doors. The one after that will be on GSAcontainers. And so on. That way, when you have aparticular type of container to open, you can pull

down one book . . . instead of searching page bypage through a dozen.



ASP - Your Auto ServiceCenter for the World

can be added so thatseparate switches areactivated depending on thedirection of the key turn.

The KP1 includes anintegrated tubular cyl in-der/key switch with 3 AmpSPDT contacts. The cylinderis f ield re-keyable and isavailable in spring loadedmomentary or alternateversions. The unit is furnishedon a stainless steel singlegang or narrow stile key plateand includes a backbox andbi-color LED.

Applications include elec-tric lock control, bypassing oractivating alarm points,controlling CCTV recorders,etc. Securitron also offers amatching miniature timer toyield timed signals from thekey switches.


Von DuprinIntroduces KeypadTrim

Von Duprin, Inc., hasintroduced a new outsidetrim with a built-in keypad forsingle-door applications. Thenew unit is easy to install,program and operate.

It is designed for use withseveral Von Duprin electrifiedexit devices. Its circuit boardinstal ls easi ly in the exitdevice case. Trim options

include active or r igidoperation, with or without keycyl inder, for maximumapplication flexibility.

The weather-resistantkeypad offers 100 usercodes, with one million codecombinations, variable inlength from two to six digits.Red, green and yellow LEDindicators show locked,unlocked and programmingacknowledgment respec-tively. The units are program-mable for either maintainedor momentary operation, andmultiple false code entries willcause the keypad to switchto an inoperative status untilreset.


Jado’s PatinaCollection

Just one of the newestproducts in the verysuccessful topline series. Thisunique and ever changingfinish begins its worn andexclusive look with your veryfirst touch.

Progressively its beautybecomes even more stylishwith each human touch. Likeno other f inish, i t agesgracefully and becomes awarm and elegant addition toany decor.

Patina hardware is nowavailable in knob and leversets with rosettes orescutcheons, cabinet knobsand cabinet pulls.

The patina collection isavailable now through designshowrooms and authorizedJado dealers. As with all ofJado products, it carries alifetime mechanical warranty.


Kano Laboratories’Penetrating LubricantWith Graphite

Kano Laboratories, Inc.,offers Penephite, a combi-nation lubricant containingoils, solvents, and micron-

sized graphite in colloidalsuspension.

Penephite takes graphiteinto inaccessible smallspaces where it adheres tometal and provides long-lasting lubrication. Even in hotor cold, wet or dryconditions, Penephite is idealfor loosening and supplyinglong-lasting dry lubrication toleaf springs, slides, locks andhinges. Penephite alsoprotects against rust.

Penephite handles themost challenging jobs— iteven reduces engine wearduring auto break-ins. Soldwith a money-back guar-antee, Penephite is availablein bulk and aerosolpackaging.


NT Monarch’sDouble EgressVertical Rod ExitDevices

NT Monarch Hardware, aNewman Tonks company,has developed a doubleegress vertical rod exit andpanic device that comple-ments the aesthetics of 10’high doors. The device allowsarchitects to maintain 10’doorways throughout astructure, including doubleegress doors as required onlarge capacity rooms such astheaters, atr iums andconference centers.

The vertical rod device isavailable with NT Monarch’s17, 18, XX and CV exit

devices. It is UL listed for 3hour A label doors, 4’-0” x10’-0” single and pairs.


Seco-Larm’s SLI-259

Seco-Larm’s newestmicrowave sensor, the SLI-259, features separateinterior and exterior zoneadjustments, with program-mable exterior zone protec-tion and autodiagnostics.

Most microwave sensorsmonitor only one zone. TheSLI-259, on the other hand,monitors two zones—oneexterior, the other, interior.When combined with analarm system with pre-intrusion detection, such asthe Seco-Larm Enforcer1000A or 2000A, the alarm’ssiren will “chirp” to warn offpotential intruders thatpenetrate the exterior zone,the alarm will be triggered.

Additional pre-intrusioncapabilities are built into theSLI-259 from SECO-LARM.This new sensor featureszones that can be adjustedindependently of each otherusing dual controls for betterzone separation. In addition,the exterior zone may beprogrammed to customizethe alarm system’s responseso that recurring intrusionswil l cause the alarm tosound.


January 1995 • 15

High security locks - an upgradefrom standard security locks -

really requires a definition.

Aside from requirements set bystandards institutions likeUnderwriter Laboratories, defining“high security” may seem a bitambiguous. Associated Locksmiths ofAmerica (ALOA) defines a highsecurity cylinder as “... a cylinderwhich offers a greater degree ofresistance to any or all of thefollowing: picking, impressioning, keyduplication, drilling or other forms offorcible entry.” ALOA defines a highsecurity key as “...a key for a highsecurity cylinder.”

Tim Layton, President of Medeco,states that “high security” isdependent on the application,but should prevent a personwho is reasonably skilled atthe art of locksmithing fromcompromising the lock in areasonable amount of time.

According to Layton, thereare two perspectives ordefinitions an end user willuse for high security: One, itis the absolute best lock forthwarting an attemptedcompromise; and, two, it is aform of key control whereattempts at compromise

demand physical damage to the lock.

The second of these twoperspectives Layton calls the “securityseal” concept. This carries the ideathat the lock and its keys are used tocontrol access by the lock serving in aseal capacity – in order to bypass orcompromise the system, the lockmust be physically (and visibly)altered or damaged.

As such, high security is dependenton application. High security to amilitary installation is different fromhigh security for a manufacturer’s toolcrib, or a company’s supply room.

Medeco locks conform to theabove definitions as well as thoseestablished by standards institutes.

Without trying to sound like anadvertisement for Medeco, they havebeen leaders in high securitycylinders since the 1960’s.

While Medeco is known forretrofit upgrading of security for

most major brands of commerciallocksets, Medeco also produces itsown line of locksets and leversets,deadbolts, vertical drop bolts, andpadlocks. Medeco also produces a lineof switch and cam locks, though highsecurity, are operationally differentfrom the architectural hardwarecylinders. (See photograph 1.)

What makes Medeco locks highsecurity? In a nutshell, the addition ofa sidebar locking mechanism withinthe cylinder, and the mechanical

means of its operation com-bined with modified pintumblers, increase the securityof the cylinder to resist picking,impressioning, and unauthor-ized key duplication. (Seephotograph 2.)

There are two means forpreventing a key from turningthe plug in the Medeco lock.The use of a shearline, typicalof most pin tumbler locks, and asidebar that must properly matewith slots in rotating bottompins. These two factors work

HIGH SECURITY LOCKS:MEDECO


Test Article #73

GENERALSECURITY

by Giles Kalvelage

1. The Medeco mortise and key-in-knob cylinder.

2. This cut away view of the Medeco lock shows thetop and bottom pins as well as the sidebar that makethis lock pick and impressioning resistant.

3. These anti-drill pins protect the Medeco lock frombeing easily drilled.

Pins

Sidebar

Anti-drillPins


corporately to prevent incorrect keysfrom turning.

The corporate shearline/sidebarfunction is attained through the use ofbottom pins that have angled orchiseled tips and a sidebar slot milledinto their side. A key with angled cutsacross the top of the blade of the keyis used to align the pins at theshearline and sidebar drop in point.These angled cuts must correspond tothe angle of the bottom pin’s chisel forproper pin alignment. When all of thetumblers are properly aligned, thebottom pins line up at the shear line asin a standard lock cylinder, plus, thesidebar slots now face and align withthe sidebar fingers, allowing thesidebar to enter the plug when the keyis turned.

Unlike the sidebar mechanism onthe familiar General Motors sidebarwafer lock, where the sidebar hascontinuous spring tension pushing thesidebar into the plug, the Medecosidebar has springs that push thesidebar away from the plug and outagainst the shell. The shear force ofthe plug when it is being turnedpushes the sidebar back into the plug.If an incorrect key is used, the sidebarslots of the tumblers do not rotate tothe proper position and the sidebarcannot be pushed back into the plug,preventing the plug from turning.

Likewise, when a key is cut usingincorrect depths, the pin tumblers donot allow the plug to turn because thepin tumblers do not line up at theshearline. A key cut with the correctdepths but wrong sidebar angles mayallow the tumblers to align at theshearline, but the sidebar cannot enterthe plug and prevents it from turning.This dual locking mechanism is whatthwarts picking and impressioningattempts.

Remember, to effectively pick astandard pin tumbler lock, turningpressure must first be applied to theplug in order to find the inherenttolerances between each pin chamberfor a successful manipulation. In thecase of a Medeco lock, the sidebarresists effective turning. The same istrue for impressioning attempts. Thesidebar resists good marks on thekeyblank because it does not allowsufficient turning pressure of the plugto bind the pins against the shear lineto leave impressions. Even if markswere readable, finding an amplesource of uncut keyblanks is difficult,

January 1995 • 17

High Security Safes Volume 1by Dave McOmie

Item #HSS

Includes safes by the following…• Bernardini • Bischoff • Chatwood-Milner

• Chubb • Fichet-Bauche • ISM • Kaso • Lord • Original • SLS • Opening jobsoften start at $1,000.00! • Over 225 pagesof complete openings! • Each safe describedwith many photos! • Contains many FULL

PAGE photos! • Very detailed openingprocedures!• These are the world’s toughest

safes! Learn to open High Security Safes now!

High Security Safes Volume 2by Dave McOmie

Item #HSS-2

Dave McOmie’s famous book, The NationalLocksmith Guide to High Security Safes,Volume 2 is here! Dave’s biggest book yet,totalling 250 pages, it is packed with greatinformation and photos of high security safesby Ambassador, Atlas, Bernardini, Bischoff,Bridgeman, Bumil, Diebold, Emo, Hadaikan,International, Kumahira, Mancini, Mosler,Original, Rosengrens, Securifort, and Vector.

Included are many opening tips designed to make your life easier.

To order, or for current price information, call (630) 837-2044 or fax (630) 837-1210 and ask for

items #HSS-1 and #HSS-2.

High

Security

SAFES

Vols 1&2

TheNationalLocksmithSampler CDItem # CAT-CD

Here's the best deal in locksmithinformation! Containing almost 400pages of hardcore locksmithinformation, The National Locksmith's

Sampler CD is so much more than just a catalog.For each of the books we sell, we give you a batch ofsample pages which gives you usable information.

And, better yet, you have the chance to review thecontents and photographs in any book before buying.

But that's just a small portion of what you actually get onthis CD. Also on the CD… • The Insta-Code Demo. View

and print an entire code series. Print/look up HPC 1200CM™ code cards. •All of the 1997 Technitips. Read every tip published in 1997. Searchable

by keywords. • Back issues of The National Locksmith. Read issues ofThe National Locksmith from the1930s and 1940s. (Contains 12

complete issues including vintage articles and advertising.)To order, or for current price information, call

(630) 837-2044 or fax (630) 837-1210 andask for item# CAT-CD.

It’s yourreputation.

Trust theoriginal.



as most keyways are restricted tosome degree.

To increase the drill resistance ofthe cylinder, Medeco inserted

steel security pins into the cylinderplug to protect the shear line and thesidebar. (See photograph 3.) The sidebar also has a security ball to increasedrill resistance. (See photograph 4.)Finally, on mortise, rim and deadboltcylinders, anti drill steel inserts helpprotect the shear line and sidebar.(See photograph 5.)

In the 1960’s, Medeco’sarchitectural hardware sidebar locksused five or six pin chambers. Thebottom pins contained an 85 degreechisel point which tapered to thecenter of the bottom of the pin. Thepin was designed so that the tip of thepin did not reach the flat of the key.Instead, the chisel point rode on theslope of the key. The pins themselveswere .135” in diameter.

The sidebar mill on the side of thepin required either a center, left orright rotation of the pin. The left andright rotation was 20 degrees from

center. The pins were appropriatelydesignated “C” for center, “L” for left,and “R” for right. Spring pressurepushing from the top of the chamberforces the chisel point down againstthe angle cut on the key, rotating itinto position. If the angled cuts on thekey matched the sidebar slots of thetumbler, the sidebar could enter theplug and. Providing the proper pindepths are also realized, the plugwould turn.

The left and right bottom pins werealso milled with a “false” sidebar slotto resist picking. Should the properdepths be realized by picking, thesidebar finger could be trapped in afalse sidebar slot. When this happens,the pin cannot be rotated. Onceturning pressure is removed from theplug, the sidebar can reset itself andreturn to the normal rest position.

Standard architectural hardwarelocks usually used a standard full step.030” increment and depths 1 through6. Noting that each depth has a center,right, and left rotation, 18 bottom pinswere available. A MACS value of fouris recommended by Medeco. (Some

special keying used half stepincrements of .015”. However, thedenotations for half step incrementswere 0 through 9.)

In the mid 1980’s, patent protectionwas due to expire on the standardMedeco patents. To be granted newpatents, a significant new designchange relating to the productoperation was developed, and theMedeco Biaxial was introduced. Whileplugs and shells required modestchanges to accommodate newlydesigned bottom pin, it was thebottom pins that received the mostchange.

While six depths remained, thechisel point was offset at .031”

from center. Chisel points in front ofcenter are known as “fore” pins, chiselpoints behind center are known as“aft” pins. Each fore and aft positionshave a center, left and right rotation.This yields a total of 36 differentbottom pin configurations. The pindiameter is remained at .135” and thechisel point is still at a 85 degreeangle. Pin rotation is still 0 degreescenter, and 20 degrees offset left or

18 • The National Locksmith Continued on page 20

5. The steel inserts on this mortise cylinder alsoprevent easy drilling.

6. Biaxial pins added a fore and aft position to thebottom tumbler configuration. 7. The letter designations for the fore and aft pins.

4. This little ball bearing protects the sidebar fromdrilling.

Ball Bearing


right. Pin increments changed to .025”for Biaxial. The locator tab has alsobeen relocated to the opposite side ofthe tumbler from the sidebar slot. (Seeillustration 6.)

Designation for pins are “K” for leftfore, “B” for center fore, “Q” for rightfor, “M” for left aft, “D” for center aft,and “S” for right aft. Notice that the“K”, “B”, and “Q” is one alphabet letterbefore “L”, “C”, and “R”, while “M”,“D”, and “S” is one alphabet letterafter “L”, “C”, and “R”. That is an easyway to remember the left, center andright letter designation of the bottompin designations. (See illustration 7.)

Turning to the master wafers andtop pins, Biaxial master wafers are

available in steps one through five,starting at .025” through .125” in .025”increments. Although the pin stack isnot constant with Biaxial cylinders,the stack should be between .499” and.524” to provide adequate pressure forbottom pin rotation.

The driver pins are stepped at .030”increments - with a noteworthyexception. Mushroom driver pins areavailable in the #3 and #5 lengths. A#3 length is .210”, while a #5 length is.150”. Some pin kits list a #4 driver,which is not a mushroom driver pin.Its length is .210”, the same length asa #3 mushroom pin. If for somestrange reason a combination does notcontain either a #3 or #5 depth, but itdoes contain a #4 depth, use a #3mushroom driver pin in that chamber.

Key SpecificationsFor the original architectural

hardware keys Medeco defines 4dimensional specifications for cuttingMedeco keys. These specificationsinclude the keyway, or key profile, thedepth of the cut, the angle of the cutand the spacing.

Medeco keys come in a variety ofkeyways. The keyway is determinedby the key restriction requirements ofthe end user and the locksmith.Although the original Medeco patentshave expired, and aftermarketkeyblank manufacturers are supplyingsome of the more commonly usedkeyways on an unrestricted basis, theintent of Medeco for the originalMedeco and Medeco Biaxial systemsare to provide several categories orlevels of key control.

An unrestricted keyway is availablefor those whose primary concern for



InstaCodeby The National LocksmithItem #CODE-1

Insta Code from The National Locksmithis the premier software program in the

industry! This one software package answersall your code needs by allowing you to lookup codes easily and quickly.

Plus Insta Code allows you to create yourown code books by printing out anycomplete series you wish...you can evenprint them all! And get this! It even printsout 1200CM™ code cards for any series!

Other features include powerful searchcapabilities, search for partial bittings andprogress them, view a picture of what thecut key will look like, tells you if it is tipor shoulder stopped, runs the Unocodeand ITL machines, cross references keyblanks, and more.

Insta Code contains no hidden costs orextra charges for multiple installations.You may install the program as many times as you need to on yourown computers with no extra cost.

You may choose to pay for the software all at once, or takeadvantage of our Easy Pay Plan...only twelve payments.

For more information on Insta Code, please contact us for abrochure and a demo, call (630) 837-2044 or fax at (630) 837-1210.


Our home study course guides you on step-by-step process, teachingyou everything there is to know about manipulation. When you have

learned this skill, you will be able to open locked safes by feel and touchalone! Manipulation allows you to open the combination lock without

drilling, and without doing any damage at all to the safe.With our Manipulation Home Study Course you learn at your own

pace, in complete privacy. After each step, you take a test to measureyour understanding!

The Best of Dale Libbyby Dale Libby

Item #DALE

This book includes the best articles written by Dale Libby over the course ofmany years, going back well over ten years! Now you can have this terrific

collection of safe opening articles, automotive articles, and more. These are thearticles that started the safe opening revolution. Now you can have them all

complete, under one cover! Order your copy today!• Sentry Hardplate Info! • 135 pages, tons of photos! • Contains over 50

chapters! • Learn from the master!• Covers safe troubleshooting.

To place an order or get current pricing, call (630) 837-2044.Click here for more informationClick here for more information

The market leader

in locking systems

for security, safety,

and control.


choosing Medeco is the pick,impression, and drill resistanceoffered by the high security cylinders.Keyblanks are readily available toanyone wishing to purchase them.

Card restricted Keys can bepurchased through any participatinglocksmith. Keyblanks may beavailable on the locksmith’s premises,as with the PATRIOT system, orfactory cut keys provided to thelocksmith distributor, through theGold Card system.

With Patriot, a participatinglocksmith may provide immediate keyservice upon presentation of a card,but the locksmith must commit to anannual sales commitment. With the

Gold Card system, the locksmith isnot required to an annual salescommitment, but all keys must beordered through a distributor, whichadds time for shipping.

S ignature restricted keys offerimmediate access to keys service

through a particular locksmith oragent.The locksmith agent isresponsible for verifying a signaturecard. Several other factory andlocksmith based key control programsare available from Medeco dependingon the need of the locksmith or enduser.

Contract restricted keyblanks,usually seen in larger facilities with onstaff locksmiths, may get their own

geographically designated keyway.

Original Standard Medecoarchitectural hardware keys were cutwith either five or six cuts, starting cutat .244”, and a cut to cut specificationof .170”. Spacing is critical as the pinsrest against the key’s cut slope, not itsflat. When using the HPC 1200 typekey machine, use HPC Code Card C36or equivalent; Cutter CW-1012, andJaw C. Framon users use Cutter CC-001

Medeco Root Depth DimensionsFor Original Architectural Keys

1 .258”2 .228”3 .198”

January 1995 • 21


8. Spacing for the Biaxial fore/aft cuts.

K B Q

DM S

9. Angle and letter designation for the Biaxial key.

Diary of aSafeman

by C. L. CoreyItem #DIARY

This book is a real gem… the private safe diary ofold time safecracker C.L. Corey. Back in the days ofAl Capone the crooks were blowing safes withnitroglycerin and C.L. Corey was out servicing andrepairing those old safes. The book features and

introduction by DaveMcOmie.

Mr. Corey not only keptnotes on all of his jobs, healso carefullyphotographed every safehe worked on. Here instriking detail, we havereproduced this diary fromthe most exciting era insafe work, the early1930’s. You’ll see all thegreat old safes from thepast and you’ll learn howto open and repair them.Many of these beauties arestill in use today!


by Robert G.SievekingItem #MSO-1 This book is astep-by-stepHow-To course insafe penetration.Opening safes isone of the mostprofitable aspectsof thelocksmithingbusiness. Now,with ModernSafe Openingyou’ll learn: thetheory of

operation through troubleshooting andcombination changing to logical penetration siteselection and methods.Nearly all possible drill points are defined andillustrated by original photos and accuratedrawings. Drill and transfer, drill for the drop, drillfor the fence, drill for a relock trigger, or drill tosolve a specific lock malfunction. Each method isdefined, and you get step-by-step procedures.Back, side, top or face drill, under the dial oroutside the dial. You’ll learn it all!

To place an order or get current pricing, call (630) 837-2044.M

od

er

n S

afe

Op

en

ing


We have it all.Quality, Value,

& Service.


SRi and SteveYoung are workingtogether to bringyou the best in

locksmith tools andsupplies.


The 1995 Nissan Maxima is thelatest redesigned version of this

model. (See photograph 1.) There aresome important changes for thelocksmith. The first is the way the caris unlocked with car opening tools, theeasier removal of the trunk lock andthe complex door lock removal.

Nissan has done away with thepush-button keyless entry system,maybe because most Maxima owners

never had the factory preset-codechanged, thus having a lot of keylessbreak-ins by using the common entrycode of ‘5523’.

This vehicle uses an airbagsupplemental restraint system.

Opening TechniquesPhotograph two shows the driver’s

door panel removed to show how aninverted horizontal slide linkage tool

is positioned to unlock the car. Slidethe linkage forward to unlock whilemaintaining a light to medium upwardpull on the tool to keep a good grip onthe linkage as you move it forward.When you insert the tool into the carwith the help of a light you will be ableto see only part of the bell crankassembly.

Ignition LockPhotograph three is a view of the

THE 1995 NISSAN MAXIMA


Test Article #74

AUTOMOTIVESECURITY

by Michael Hyde

1. The 1995 Nissan Maxima

2. The horizontal linkage must be grasped up near thebell crank and moved forward.

3. A view of the ignition and the two piece clam shellcolumn shroud.


ignition cylinder assembly in the car.There is a large gray plastic slide-oncover that sits over the face of theignition. The column shroud is a twopiece clam shell held together by sixscrews. Remove the six screws toremove the shroud and disconnect thebattery.

Photograph four is a view of theignition assembly with the plasticremoved. It is not necessary to

remove the airbagto service the igni-tion. Disconnectthe wiring from theignition and thenremove the shear-head bolts. Formodels with anautomatic trans-mission, lower theassembly and re-move the Phillipshead screw that isholding the automa-tic transmissioninter-lock in place,and then remove.(See photograph 5.)

Photograph sixis a view of theignition assemblycompletely disas-sembled. The cylin-der is secured inplace by two solidroll-pins that can beeasily removed bydrilling a 7/64” hole directly next toeach pin and using that hole to pry upthe pin.

Door LockPhotograph seven is a view of the

door lock cylinder as it sits in thehandle assembly. Photograph eight isthe driver’s door panel. To remove the

January 1995 • 23

5. On Maximas with automatic transmission,disconnect the inter-lock cable from the ignition.

6. The disassembled Maxima ignition.

4. The ignition lock with shroudremoved.

The National Locksmith

Guide ToElectronic

LocksmithingItem #El-1

Everyone knows there’sbig money in selling,installing and servicingelectronic security such asmag locks, electronicstrikes, and simple accesscontrol. But how can youlearn all the skills neededto make the profits?

This book starts withthe all the basics thatevery locksmith needs toknow about electricity,

and teaches you every step of the way. You’ll learneverything you need to know to handle everything fromclosed circuit TV, simple access control, wireless security,and electronic locks.

To order, or for current price information, call (630) 837-2044 or fax (630) 837-1210 and ask for item #EL-1.


Insta Code from TheNational Locksmith is the

premier software program inthe industry! This onesoftware package answers allyour code needs by allowingyou to look up codes easilyand quickly.

Plus Insta Code allows youto create your own code books by

printing out any complete series you wish...you can even print themall! And get this! It even prints out 1200CM™ code cards for anyseries!

Other features include powerful search capabilities, search forpartial bittings and progress them, view a picture of what the cut keywill look like, tells you if it is tip or shoulder stopped, runs theUnocode and ITL machines, cross references key blanks, and more.

Insta Code contains no hidden costs or extra charges for multipleinstallations. You may install the program as many times as you needto on your own computers with no extra cost.



National Auto Lock Service, Inc. offers a widerange of equipment and services for the

Automotive Locksmith. From tools and hard tofind key blanks to transponder

programming, we can take the mystery out of carservice. We accept credit card orders, and can ship

COD. Contact us for the latest inautomotive technology.



panel, you will need to remove the twoscrews on the bottom of the panel andthe one screw located in the door pullcavity. Next, remove the trim coverthat sits on the inside release leverassembly, it simply pops off. The panelcan now be pulled outward as it usesstandard push-in plastic clips.

Photograph nine is a view of thedoor panel removed. To remove thedoor lock cylinder, you must firstremove the linkage bell crank, linkage

shield, gray steel door support and leftside window track. It sounds difficultbut it really isn’t. To remove the leftside window track you must removethe one 10mm screw that holds it inplace. The screw is located on thelower portion of the door edge at thepoint where it curves around. Afteryou remove the screw the track justslides out.

Photograph ten shows you the viewof the door lock/handle assembly

after the linkage bell crank, linkageshield, gray steel door support and leftside window track have beenremoved. Now there is a lot moreroom to work in and you can now gainaccess to all the handle screws.Remove the handle and disconnectthe electronics from the door cylinderby removing the one Phillips-headscrew that attaches it. (See photograph11.) The door cylinder can now beremoved from the car for disassembly.(See photograph 12.)


7. The teardrop shaped Maxima door handle and lock. 8. Driver’s door and inside door panel.

11. Lock after handle has been removed. 12. Handle assembly and lock disassembled.

9. With the door panel removed the lock and locklinkage can be seen.

10. In order to get to the lock cylinder, the bell crank,linkage shield, door support and window track must beremoved or loosened.


Trunk LockThe redesign of the rear section of

the Maxima makes it a lot easier toremove the trunk lock cylinder. Thetrunk lock cylinder is located on theright side of the deck lid near the taillight. Inside, the trunk lid liner mustbe removed to gain access to the lockcylinder. (See photograph 13.) Theliner uses push-in clips that can beeasily removed and reused. After youhave removed the liner you will beable to see the trunk lock cylinder.The cylinder has an electronics unitthat snaps on to the lock body.

Remove the electronics unit byunsnapping it and then remove thelinkage rod and standard horse-shoeclip that holds the lock in place. (Seephotograph 14.)

Photograph 15 is a view of theelectronics unit and trunk cylinderdisassembled.

Glove Box LockTo remove the plug from the glove

box lock you must have the plug inthe locked position and then depressthe copper colored retainer. (Seephotograph 16.) The plug contains

only four out of the eight tumblers.(See photograph 17.)

Making First KeyThere are no codes located on any

locks on this car. The only place thecode is located is on a metal tagsupplied with the factory keys. Tomake a first key to the car, othermethods include:

Method #1Remove and disassemble the trunk

cylinder to get all eight cuts to make amaster key. The electric trunk releaseswitch is located on the driver’s door

January 1995 • 25

13. This liner must be removed to get to the trunklock. 14. The trunk lock is easily removed.

Revised GM Steering

Column Courseby Thomas A. Mazzone & Tom Seroogy

Item #GM-2

Here’s what the course contains: • Comes complete with take-home test

so you can become certified on GM steering column service! •

Authoritative training on every domestic GM column from 1967 to

1995. • Includes the collapsing GM steering shaft, avoid the $165 GM

10-cut mistake, A to Z airbags, square columns made easy, Alpha Tech

Service without fear, the truth about VATS variable timing and more. •

Written and photographed by 24 year GM Master Technician, Tom

Mazzone, and 10 year Auto Locksmith Expert, Tom Seroogy. • In-

depth information drawn from actual field experience. • Large clear

photos highlight commonly found problem areas and take you step by

step for clear, easy and concise service procedures. • Dangers & Warning section alerts you to costly and

time consuming problems before you start. • A tool guide shows exactly what tolls are necessary for

servicing each column. • Written using the came strict GM service guidelines used for training GM

technicians.

Revised GM Steering Column Course Updateby Thomas A. Mazzone & Tom SeroogyItem #GMU-1

GM’s newest and hottest columns and security systems are fully exposed and revealed in easy step-by-

step instructions in this latest steering column service update. • An easy to follow, in-depth service

update, based on GM’s own Service Technology Group training as offered only to GM certified

technicians. • Complete Buick Park Avenue PASS-Key III transponder system diagnostics and service. •

Avoid the Passlock I (MRD) programming mistakes that other manuals don’t reveal. • Passlock I (MRD)

and PASS-Key III service short-cuts that really work! • First service and programming procedures for

GM’s newest electronic security — the PASS-Key III transponder system. •Brand new Security System

Section explores the concepts and theories that make GM’s newest electronic security systems

possible. • Passlock vehicle dash disassembly displayed in four easy to follow steps. • Complete with over

50 large, detailed photographs and graphics.

Toorder,or for

currentprice,call

(630)837-

2044 orfax

(630)837-1210.

DaveMcOmie’sPenetrationPartyby Dave McOmie — Item #PP-1

Uncensored! • The Safes! • The Tools!• The Action! • The Perfect Openings!• The Bloopers and Blunders! • TheSlick Tricks!

No one knows safes and safecrackinglike Dave McOmie. When it comes to drillpoints, he is the master of all masters.This book takes you inside Dave’s mind,and allows you to follow his thoughtprocess as he analyzes each opening.Dave gives you his thoughts on the bestopening method, then the opening isperformed. And then Dave honestlyappraises each method and offersimprovements where he feels hisoriginal methods were less than perfect.

To order, or for current priceinformation, call (630) 837-2044 or fax(630)837-1210 and ask for item #PP-1.


The Innovation You Expect, with theFlexibility You Need!


panel and is always active. The trunklock uses the standard Nissan facecap, ASP Part # P-16-205. (Time 15 to20 Minutes.)Method #2

Impression the door or trunkcylinder to make a master key.Code Series: Y & X 1-8000Key Blank:Ilco X123/DA25, X124/DA28,

X197/DA30, X210/DA31Silca DAT13, DAT14, DAT15, NSN11HPC Card: CF67MACS: 2Shoulder To Center Of First Cut: .115”Cut to Cut: .085”Depths:1=.280”, 2=.260”, 3=.240”,4=.220”Michael Hyde is the author of the newAutosmart, published by the NationalLocksmith.


15. The trunk lock disassembled.16. After turning the glove box plug to the lockedposition, depress the retaining wafer for removal.

17. The disassembled glove boxlock.

Tumbler Locations1 2 3 4 5 6 7 8x x x x x x x x Ignition, Doors, Trunkx x x x Glove Box

Retainer

Auto LockService

by The National LocksmithItem #ALS-1

• Covers opening and service techniques. •Covers over 15 different locks and

manufacturers. • Learn how to make keys.Chapters cover service and repair on the

following: Audi, BMW, Corsica, Corvette,Daihatsu, Datsun, Ford Probe, Ford Festiva,

Honda CRX, Honda Acura, Hyundai, Mercedes,Mitsubishi Precis, Pontiac Fiero, Suzuki Samurai,

Toyota and Volvo. A great value.

To order, or for current price information, call(630) 837-2044 or fax (630) 837-1210 and ask

for item #ALS-1.


Our home studycourse guides you onstep-by-step process,teaching youeverything there isto know aboutmanipulation.When you havelearned this skill,you will be able toopen locked safesby feel and touchalone!Manipulationallows you to openthe combinationlock withoutdrilling, and

without doing any damageat all to the safe.

With our Manipulation Home Study Course you learn at your ownpace, in complete privacy. After each step, you take a test tomeasure your understanding!

To order, or for current price information, call (630) 837-2044 orfax (630) 837-1210 and ask for item #MAN-1.Click here for more informationClick here for more information

Make Sargent & Greenleaf ’sComptronic locks your choice forelectronic safe locking solutions.


Once wire or cable has been run,it’s necessary to fasten it or tie it

down to prevent damage. Even thoughsuch conditions as drop ceilings makeit convenient to let wiring lie-as-is onceit has been run, installers andtechnicians from other equipmentcompanies (i.e. telephone, lighting,HVAC, etc.) may need access to theareas your wiring has been left. If notsecured, incidental damage canunnecessarily occur. The best policyin any case is to fasten it!

How your wire is going to befastened is going to depend on thetype of run, the type of wire, andenvironmental conditions.

Special cases, for example, requirespecial types of fasteners, hangers orraceways. Running wire throughvolatile areas such as granaries orpetroleum product factories requirespecial wiring and special raceways toprevent explosion.

Long runs of heavy wire in anoutside environment demand thecorrect number of the correct type ofhangers at correct intervals along thelength of the wire. If not, wind, rain,and icing can bring the wire down orcause enough chaffing to wearthrough the wire’s insulation.

Running wire beneath ground oftendemands not only a special type ofwire, but also a correct racewayburied at correct specifications forspecific conditions and environment.

As covered in previous articles, thebest way to know and understandthese requirements and conditions isto take courses on the NationalElectrical Codes (NEC) and to obtainthe NEC manual. A copy of the NECmanual covers most all the conditionsan electrical installer will run into andcan be found in the local library or canbe obtained from the National FireProtection Association (NFPA) at 800-344-3555. The price at the time of thisarticle is $74.50 plus a $4.15 handling

charge.For most electronic locksmiths,

however, running wire is not sospecialized. Typical installationsinclude studded drywall walls, dropceilings and concrete or cinder blockwalls. Running wire across andthrough such environments generally

involves only a few types of fastenersand runways.

The most common fastener is thestaple gun. It’s fast, effective and isapplicable for most surfaces whichinclude drywall or wood. Whenchoosing to staple, it is critical that thecorrect staple gun and the correctstaple size and type be chosen.

Unlike other staple guns, onedesigned for wire has a small saddle atthe front of the gun to align the wirewith the staple. (See photograph 1.) If

this type of gun is not used, or thecorrect gun is used incorrectly, thestaples can pierce the wire, causingshorting or other problems.

Like the staple gun, the staples arealso specially designed. The simplestand most basic is the standard wirestaple, utilizing a round, as opposed tothe standard square, top. (Seephotograph 2.) When using the correctsize, the wire will sit within the innercircumference of the round top of thestaple assuring even pressure aroundthe diameter of the wire.

While using the correct staple gunand staple may seem insignificant, notusing the correct gun and staple canlead to problems. As stated earlier, thewire staple gun has a guide or saddleto properly guide the wire andposition the staple. A standard staplegun does not. (See illustration 3.)

Also, the cradling effect of the wirestaple reduces the possibility of wiredamage by applying holding pressureevenly around the wire or cable’s

January 1995 • 27

WIRE FASTENERS ANDHANGERS

Test Article #75

ELECTRONICSECURITY

by Tom Seroogy

3. A staple gun for wire has asmall saddle to align the wire withthe staple. A standard staple gundoes not.

2. Specially shaped staples, suchas these, are used for fasteningwire.

1. Stapling is one of the mostcommon wire fastening methodsused by the electronic locksmith.


circumference. In using a standardstaple, the flat top tends to crush thewire and places most of the holdingforce at one point on the wire.Eventually, vibration and buildingmovements will cause the standardstaple to work its way through a wire’sinsulation while the cradling effect ofthe wire staple will hold the wirewithout damage. (See illustration 4.)

To further assure that wiring is notdamaged, staples with fiber or plasticinsulating tops are available. Tofurther reduce the likelihood ofdamaging the wire through stapling,never staple bundles or groups of wireor cable. Each wire or cable runshould be stapled individually. Staplesshould be placed at 12” to 18” intervalsalong a wire run.

Another common wire fastener isthe cable tie. (See photograph 5.)

The cable tie is a fast and effectivedevice for neatly bundling groups ofwires or attaching wire/cable toconduit, tresses or other objectswhere other fasteners may not work.To use, the tie is wrapped around agroup of wires/cables. One end of the

tie is then fed through a self lockingblock found on the other end and thenpulled tight. The excess tie should becut to make for a professionalappearance.

In some instances, the excess canbe fastened to a wall or ceiling viascrews or nails for hanging the bundleof wires/cables. Cable tie hangers doexist, however, that incorporate anail/screw hole to the cable tie forfastening to a wall or ceiling.

Many situations and circumstancesdemand that the wire/cable bemounted to the surface of the wall orceiling. This is most common wherecinder block or concrete walls areconcerned. While running the wirethrough conduit is the most idealmethod, cost considerations usuallydictate some other form of runningthe wire. And as always, there is morethan one way to accomplish this,depending on the surface of the wallor ceiling.

The most common are the simplewire hangers made of metal or plasticwhich are capable of holding one or

more wires based on the size of thehanger. (See photograph 6.) Installingthe hangers usually involves drillingand placing a screw anchor into thewall and then fastening the hanger.

Along this same avenue is a metalhanger that incorporates its own

fastener. Looking similar to a nail withan added metal or wire loop, thishanger can be driven into wood (joistsand tresses for example) or into themortar joints of cinder block walls.Once the hangers have beenhammered into position thewire/cable can be run and then cabletied to the hanger.

Another option for surface mountwiring where aesthetics is of concernis the plastic or metal surfacemounted wire molding or conduit.(See photograph 7.) Made by variousmanufacturers, these raceways makean attractive and clean job out of wirerunning. These products come witheither an adhesive back (for smooth,non-porous surfaces), or are fastenedto the wall by anchors and screws.


4. A staple designed for wire will cradle the wirecorrectly. An incorrect staple will crush the wire andcan cause problems later down the road.

5. The cable tie is a fast and effective means ofbundling and fastening cable and wire.

6. Two types of wire hangers/fasteners. While theseones are made of metal, many are made of plastic.

7. This plastic duct is perfect for running wire where itmust be surface mounted. Notice the double sidedtape used for easy mounting and the small metalchannels used for connecting the lengths of duct.


What happensif you are a

new locksmith andsomeone brings ina lock with noidentification andthey want to have anew key made?Well, what happensis that you spend alot of time goingthrough all your key blanks to find thecorrect blank that will work. When Ifirst started as a locksmith, I wouldhave given my eye teeth to know whatblank would fit a camper, garage dooror electric box.

While most of the locks forcampers, garage doors, electric boxes,etc. are or were purchased from amajor manufacturer such as Chicago,Yale, National Cabinet Locks, Corbin,Hudson, Fort, ESP, etc., they are oftenhard to identify because there are no

names on the lock. In some cases itcomes down to contacting themanufacturer of the product andasking who their lock source was.Steel Case office furniture, forexample, uses Chicago locks andcylinders almost exclusively. Hon filecabinets are typically Hudson locks.

While no list is ever complete,Table 1 below shows some typicalkeyways used on various types oflocks.

Another problem locksmiths runinto is finding a blank that iscomparable or similar to an originalkeyway. For example, the Kwiksetkeyway is a pretty universalresidential keyway and its key will fitinto many other manufacturers locks;Master (Dexter) and Weslock forexample.

This type of crossing should not bea common practice, however. Every

manufacturer has their keyblanksmade to specifications that exactlymatch their lock. Using the correctkeyblank assures that the key isproperly seated against the designedlands for the lock system. Otherblanks my work well at times, butincorrect milling and lands only offerfuture trouble in duplicating andkeying. In the event you find yourselfwithout the correct blank try a few ofthe comparison blanks listed in Table 2.

BBEEGGIINNNNEERR''S S CCOORRNNEERR

byEugene Gentry

Finding Correct Keys


Cole Ilco Taylor Star

Bicycle Locks AM1 l041C 41C JU1CL1 1023 123 5CL1M10 1092N 92N 5MA5VR6 L67A — —Y52 997X 7X 4YA6

Desks-Cabinets AP5 100AM F41M CG3L1 1054MT 54MT 5IL11NA12 1069LB 174BA 5AU2RO9 1069N 174J RO6SL1 1120D 120D SL1Y11 H1054L — —Y12 H1122F H7F —Y103 K1122B L54K —

Campers BN1 K1122D L54P BN1IN8 L1954B L54B IL5IN10 ll41H 111TS —IN28 — — —

Garage Door Openers CG1 1041G 41G CG1File Cabinets CG14 1041Y 41Y 5CG4

CO105 1003D 22R$ —CO106 1003M 22R14 5AU1SC6 1307A 307A SH2

Garage Doors L1 1054MT 54MT 5IL11Y1 BKZ1 — —Y1C — — —T4 1141GE 111GE 5TA4

Cole Ilco Taylor Star

Gas Cap B1 1098GX — HBR3Boats B1 1098GX — HBR3

NA12 1069LB 174BA 5AU2Tool Box B1 1098GX — HBR3

CO26 1000V 20V LCO7Y11 H1054L — —Y12 H1122F H7F —

Mail Box BO1 R1003M 22B 5BO1CO105 1003D 22R4 —CO106 1003M 22R14 5AU1Y14 H1122AR HRO7NX —NA12 1069LB 174BA 5AU2

Freezer CG16 1054UN 41RB IL10UNRO1 1069 62 RO1RO6 1069-54 174H —Y12 H1122F H7F —Y103 K1122B L54K —

Suitcase M1 1092 92 MA1Cole Ilco Taylor Star

Moped M12 1092DS 92F 4MA7Screen Door PZ1 — — —Copiers RO6 1069-54 174H —Sprinkler B1 1098GX — HBR3BoxThe Club DA22 X6 X6 DA4

JA73 X7 X7 DA3

AR1=SE1DE3=B1DE7=IN3=KW1IN3=KW1=DE7IN8=Y11IN34=NA5KW1=DE7=IN3L1=L4M1=M10

MD17=DE7NA5=DE7=IN3NA6=NA5OL1=DE7=IN3RO1=Y11RO6=RO7RO7=RO4RO9=RO1

Table 1

Table 2


There is a great deal more to an electric strike installationthan just the strike itself. For an opening to be properlycontrolled by an electric strike, it should be thought of as acomplete system. The door and frame, door hardware,electric strike, and electrical components must all worktogether. Only by treating it as a system will you be able toprovide full control of the opening.

The choice of electric strike will be determined by :•The type of lock on the door•The size and material of the door frame•The electrical requirements of your system•How the door will be used

Addressing these issues, in the order they are listed, willnarrow your choice of strike down to the one or two unitswhich are most appropriate for your needs. (Since aparticular electric strike may be produced by more than onemanufacturer, the issue of brand is left up to you.) (Seephotograph 1.)THE LOCK

The locking hardware on the door is probably the mostinfluential factor when selecting an electric strike. This isbecause there is such a wide variety of latch sizes andconfigurations available. It is vital that the strike is able tocapture and release the latch properly.Cylindrical Knoblocks

When using an electric strike with a cylindrical knoblock,remember that most strikes are designed for use withlatches up to 1/2” long. Many Grade 1 locks have 3/4”latches which require strikes that will accommodate theirextra length. Some also have an anti-friction lever to reducewear, provide smooth operation, and extend the life of thelatch unit. The strike will need to allow room for this lever aswell.

Deadlatch units can cause problems with electric strikes,particularly when using Grade 2 or Grade 3 locks. Whenused with certain strikes, the keeper can wedge between thelatch and the deadlatch pin. This will damage the deadlatchunit, the electric strike, and, possibly, the lock. For thisreason, it is important that the strike is properly adjustedwhen used with a deadlatching lock. For greater durability,you may want to specify a strike which is adjustable -especially for high traffic openings.Mortise Locks

Mortise locks are available in such a wide variety offunctions and latch configurations that it can get confusingtrying to select the proper strike. There are specializedstrikes for mortise locks and tubular deadbolts. They are of amodular design, with several scalp plates and internaloptions to accommodate different latch and boltarrangements.

There are several things to consider when selecting astrike for a mortise lock :

Is there a deadbolt? If so, do you want it to be released bythe electric strike?

An electric strike which releases a deadbolt has a trigger

that the bolt strikes as the door closes. This trigger releasesthe strike’s keeper allowing it to close and capture thedeadbolt. The keeper will stay in the open (unlocked)position until the deadbolt hits this trigger. It is importantthat the deadbolt remain extended at all times if it is to bereleased by an electric strike.

Some mortise locks have a ‘panic-proof’ function thatretracts the deadbolt when the inside knob or lever isturned. A lock with this function will prevent the strike fromoperating as intended, and changing the function of thehardware or purchasing all new hardware may be necessary.

Another style of strike has a cutout above the keeper toaccept the deadbolt. The deadbolt must be unlockedmanually with this type of strike - it cannot be releasedelectrically. Some customers like this because it allows themto use the deadbolt for added security at night.

Is the latch below the strike centerline?This is very important. By knowing the position of the

latch in relation to the centerline of the strike, you canspecify an electric strike that allows for any offset of the latchand still fit the existing frame prep without majormodification.

Is there an auxiliary deadlatch arm?The strike will need to provide a beveled edge for the

deadlatch to ride up on and a flat surface to hold it retracted.Without these, the deadlatch may prevent the door fromclosing and latching properly.

Is there a latch, but no deadbolt?If there is a latch only, or a latch and deadlatch, you may

be able to use an electric strike designed for cylindrical knoblocks. However, keep in mind that mortise locks typicallyhave latches 5/8” to 3/4” long. Make sure that the strike youchoose will accommodate this extra length.Narrow Stile Glass Door Locks

Currently, there is no electric strike that works withdeadbolts on narrow stile aluminum doors. If you need anelectric strike on a door which has this type of lock, you willneed to replace the deadbolt with a deadlatch style lock.

The main considerations here are that it fits within thedoor frame and allows the latch to extend fully. Make sure

Only by treating a doorway as asystem will you be able to provide

full control of the opening andprovide for a proper electric strike.

Cover

Featur

e

by Steve Gebbia


1. The door mustbe viewed as a

system.


that the strike will completely cover any existing strikeopening. The strike must also provide an angled surface forthe deadlatch arm as well as a flat surface for it to rest on. Exit Devices

Rim, mortise, and vertical rod type exit devices can all bereleased by an electric strike. Each style of device, however,has its own special requirements.

An electric strike for a rim device will be semi-mortisedinto the door frame or mullion. The body of the strike sitswithin the frame, while the face plate surface mounts to thestop portion of the frame. Because this is a Grade 1 strike,you will need extra depth within the frame. The mostimportant measurement, though, is the clearance from theedge of the active case to the surface of the door frame ormullion. Usually, a minimum of 1” is required but this willvary with manufacturer. These strikes are available withseveral different thickness face plates to accommodatedifferent clearances. They may cause conflicts with the ADAbecause the faceplate extends into and reduces the width ofthe opening. (See photograph 2.)

A mortise exit device latch engages the door frame thesame as any other mortise lock. The same considerationsthat apply to mortise locks also apply to mortise exit devices.

Vertical Rod exit devices are available with surface mountor concealed rods. Concealed rod devices generally cannotbe released with an electric strike. This is because of theirunusual method of latching.

Surface mount vertical rod devices can be released withan electric strike, but modifications are required for properoperation. Most vertical rod devices have a top latch with ahold-back function. On these units, the top latch holds therods in the unlocked position until the door closes. Whenthe door closes, the top strike releases the latch allowing therods to fall and relatch the door. This top latch must bereplaced with a pullman style latch. A pullman latch has nohold-back, allowing the latch to extend as soon as thecrossbar is released. Also, the bottom rod and latch must becompletely removed. The strike mounts to the headerportion of the door frame the same as strikes used with rimdevices. The critical dimension is the clearance between thetop latch case and the surface of the door frame.

Remember that the latches on fire rated exit devices aredifferent than those on panic rated hardware. When orderingparts, make sure you know the device rating. Also, some firerated devices use a top latch with is mounted within thesoffit of the frame. There is currently no strike available to fitthese soffit latches. THE FRAME

Electric strikes are available to fit wood, steel, oraluminum frames. The primary difference lies in mountingmethods.

A strike for a wood frame must have either an internalsolenoid or one which projects from the rear of the unit. Asolenoid that mounts atop or below the strike body willinterfere with the mounting screws. Of course, this meansyou will need enough depth to accommodate the addedlength of the solenoid.

A steel frame may have a strike box and/or be mortarfilled. These will need to be removed prior to installation.Many times you can use the existing mounting tabs tosecure the strike.

You will need to provide your own mounting surface inaluminum frames. Mounting tabs are available from a variety

of manufacturers. Select a strike that has a face plate longenough to cover any existing cut-out.

If this is a fire exit you will need a fire rated strike tomaintain the integrity of the fire wall system. A fire wallsystem is designed to slow the progress of a fire bypreventing the free movement of air through the building.Any opening within this fire wall must also provide the sameprotection. All hardware applied to a fire wall system mustcarry the same rating as the door and frame to which it isapplied. This includes the lock, electric strike, door closer,hinges and any other item attached to the door or frame. Inevent of fire the door must close and relatch automatically. Ifusing a continuous duty strike, it should be tied into thebuilding’s fire alarm system so that it will automatically lockin case of fire.

Failure to follow fire codes is illegal and presents a veryreal life safety hazard. THE POWER

Releasing the strike can be accomplished with a widevariety of devices. These range from a simple button to abiometric scanner. No matter which method you plan to use,plan your wiring and installation in advance. Know whereyou will get your power and where you will locate the releasedevice.

For more sophisticated systems, you may want a strikewith a latch position monitor. These strikes have a smallswitch in the keeper cavity that is activated by the latch.Make sure your system will accommodate this and allow forthe extra wiring involved.

Different systems have different voltage requirements.Make sure you select a compatible strike. Also determinewhere you will run your wires and choose a wire sizeappropriate to the length of the run.The People

Knowing traffic patterns and expected usage is vital toproperly controlling an opening with an electric strike. If thestrike will be released by timer, or it is a high traffic opening,specify a continuous duty strike.

In order for an electric strike to properly secure anopening, the door must close and lock after every use. Adoor closer and a storeroom function lock are essential.

For added security a latch protector or an astragal can beused. However, many strikes are not flush with the face ofthe door frame. There are latch guards and astragalsdesigned specifically for use with electric strikes.

As you can see, there is a lot to consider when selectingan electric strike. Take the time to visit the site and ‘scope itout’ in advance. Armed with the knowledge of what to lookfor, you will find a strike to fit the frame, secure the opening,and operate the way you and the customer intend it to.

January 1995 • 33

2. Rim exitdevices use an

electric strikethat

may affect ADA

compliance.


One of the more demanding tasks in electric strikeinstallation is the prepping of a mortar filled steel frame. Foryears the installation and application limitations posed bythese frames have created problems for end users, installersand electric strike manufacturers alike.

For end users, having the frames modified for electricstrike work often meant spending lots of money. The mortardust after the installation often clogged the working parts ofthe strike making them unreliable and hard to maintain. Inessence, what the customer ended up with was an expensiveinstallation that raised more problems than the intendedsecurity or control was worth.

For installers, finding easy methods, techniques andreasonably priced equipment was a battle. Installationproblems caused by a hard to cut frame and a mortar fillwere compounded by having only a small selection ofstrikes that fit easily into a small cutout and that could take adegree of mortar dust without failure.

Manufacturers, of course, had their own problems.Trying to create a strike package that fit into a small cutout,resisted failure due to mortar dust, and maintained thestrength and integrity of the units they had been producingfor years, was a formidable task that, I’m sure, kept theirengineers up late.

From all market corners (end user, installer, andmanufacturer) mortar filled steel frames have been theepitomy of frustration. And for good reason. Let’s look atwhat it takes to install a strike into one of these frames.

For the most part, the strike areas of these steel framesare typically cutout for a standard ANSI, 1-1/4”x4-7/8”,strike plate. Steel strike plate mounting tabs are welded tothe inside edge of the frame. A steel box is also included and

is either an integral part of the mounting tabs or is weldedseparately to the inside frame.

When the door is installed, mortar is poured down intothe jambs and, sometimes, into the header. The mortar flowsdown into the frame and around mortar anchors attached tothe frame, keeping it firmly in place. The mortar is preventedfrom flowing into and clogging up the strike area by thepresence of the steel box.

The mortar and the steel box form the essence of theproblem for a strike installation. While the box keeps thearea free from mortar, it is much too small to accept thebody or chassis of an electric strike. Therefore, the box mustbe removed. Removing it, however, is difficult due to theconfined working area and the fact that it is surrounded bymortar. Once the box is removed, the mortar must beremoved and the mortar inside the frame treated to preventdust.

Cover

Featur

e

by Tom Seroogy


1. This HES 1003K electric strike has the solenoidtucked away in its lip, making it virtually impervious tomortar dust problems. The small chassis area makes itideal for mortar filled steel frame installations.

2. The new 7000 series strike by Adams Rite featuresa whole new design that can be easily used for mortarfilled steel frame applications.

3. Trine, too, has developed a new line of heavy dutystrikes. This model EN400 makes easy work of mortarfilled steel frame applications.


The first part of prepping the door for an electric strike isto find a strike. All the major strike manufacturers now carrystrikes for the mortar filled frame environment. HanchettEntry Systems (HES), Adams Rite, Folger Adam, Trine, Rofu

and Rutherford all carry compact and reliable strikes at areasonable cost. (See photographs 1, 2 and 3.)

Most noteworthy in these strikes is the compact and dust

January 1995 • 35

4. With the box attached directly to the mounting tabs,use a cutting wheel to cut the box loose for removal.

5. In this type of box, it is necessary to cut the boxloose from the frame. This can often be accomplishedby a chisel or screw driver.

Door Lock Encyclopediaby Robert Sieveking

Item #DLE

The ability to remove alock from a door,disassemble themechanism, and removethe lock cylinder forservice is not always asimple straightforwardtask. The Door LockEncyclopedia is a clearand concise illustratedservice manualillustrating serviceinstructions for standardcylindrical locksetsincluding AmericanEagle, Arrow, Corbin,

Dexter, Harlock, Kwikset, Lori, Master, NationalLock/Amerock, Sargent, Schlage, Weiser and Yale. It willequip you with specific knowledge and a few tricks to makeservicing understandable, easy to master and profitable.


Lock Repair Manualby The National Locksmith

Item #LRM-1

Chapters cover installation and repair for thefollowing manufacturers: Abloy, Adams Rite, ASSA,Best, Chicago, Corbin, mortise locks, Sargent, Schlage,Simplex, Weiser, Yale,Unilock, electric gatelocks, and cabinetlocks. This bookcontains materialreprinted from TheNational Locksmith.

Here, under onecover you have atremendous amountof lock servicinginformation. Nexttime you run into aproblem chancesare you’ll find theanswer in the LockRepair Manual.



Free freight!!

No middle man!!


protective nature of the solenoid or coil area. Additionally, allof these manufacturers offer strikes with an ANSI faceplate.Such adaptations make them much easier to install andmuch more dependable in a mortar filled steel frameinstallation.

After the strike is chosen, its time to tackle the frame.First measure and cut for the lip backset dimension. Thiscan range from as deep as 1-11/16” on a Trine model to asshallow as 5/8” on an Adams Rite. If you’re not inclined to doa lot of electric strike installation, a Dremel tool with acutting wheel is an effective way to make this cut. Ifinstalling a lot of electric strikes, however, a die grinder withcutting wheel or a plazma cutter are a more efficient andeffective means for making these cuts. Once the lip area hasbeen cut, clean it up with a file.

With the lip area removed, there is more room for tools togain access for removing the strike’s mortar box. Asmentioned earlier, there are two methods used in attachingthe box. One method attaches the box directly to the strikeplate mounting tabs. (See illustration 4.) This is the easier ofthe two box types to remove. Simply take a small cuttingwheel and cut the box off at the ends of the mounting tabs.Once the box is separate from the tabs, use a pliers toremove the it from the strike cavity. Some bending andtwisting are necessary to pull this piece through the strikehole. Take your time and be careful not to get cut.

The second type of box is actually welded right to theframe. Removing this unit is much more difficult, as fewtools can reach the points that need to be cut. If a cutting


6. After the box is loose from the frame, use a pliers toremove it from the strike cavity.


Guide ToElectronic

LocksmithingItem #El-1

Everyone knows there’sbig money in selling,installing and servicingelectronic security such asmag locks, electronicstrikes, and simple accesscontrol. But how can youlearn all the skills neededto make the profits?

This book starts withthe all the basics thatevery locksmith needs toknow about electricity,

and teaches you every step of the way. You’ll learneverything you need to know to handle everything fromclosed circuit TV, simple access control, wireless security,and electronic locks.

To order, or for current price information, call (630) 837-2044 or fax (630) 837-1210 and ask for item #EL-1.


Insta Code from TheNational Locksmith is the

premier software program inthe industry! This onesoftware package answers allyour code needs by allowingyou to look up codes easilyand quickly.

Plus Insta Code allows youto create your own code books by

printing out any complete series you wish...you can even print themall! And get this! It even prints out 1200CM™ code cards for anyseries!

Other features include powerful search capabilities, search forpartial bittings and progress them, view a picture of what the cut keywill look like, tells you if it is tip or shoulder stopped, runs theUnocode and ITL machines, cross references key blanks, and more.

Insta Code contains no hidden costs or extra charges for multipleinstallations. You may install the program as many times as you needto on your own computers with no extra cost.



Click here for more

information

Click here for more

information

Providing quality

tools, parts, and

service for

the security

professional.


tool can reach the necessary spots for cutting, use them.However, in most cases a chisel or old screw driver can beplaced in the corners of the box. Striking the chisel or screwdriver cuts the box and separates it from the frame. (Seeillustration 5.)

Extreme care should be taken here. Striking the box witha chisel or screw driver may pull at the points where the boxis welded to the frame, tearing it from the frame. In someinstances this may leave holes or deform the frame surfaceat the weld spots. Also, remember to wear eye protection!

With the box severed from the frame, use a pliers toremove the box from the strike cavity. The other ends of thebox that remain in the door may have to be moved forcertain strikes to fit. (See illustration 6.)

With the box removed, use a mason drill or a masonchisel to clear away excess mortar. There is no easy or funway to accomplish this, but be careful not to damage theframe or your existing strike cutout as you do so. (Seeillustration 7.)

Once there is ample room for your chosen strike, apply acoat or two of paint to the mortar still inside the strike area.This will reduce the amount of mortar dust that will get intothe equipment.

January 1995 • 39


7. Use a mason drill or mason chisel to remove themortar from the frame. When done, paint the mortar tolimit the dust.

Auto LockService

by The National LocksmithItem #ALS-1

• Covers opening and service techniques. •Covers over 15 different locks and

manufacturers. • Learn how to make keys.Chapters cover service and repair on the

following: Audi, BMW, Corsica, Corvette,Daihatsu, Datsun, Ford Probe, Ford Festiva,

Honda CRX, Honda Acura, Hyundai, Mercedes,Mitsubishi Precis, Pontiac Fiero, Suzuki Samurai,

Toyota and Volvo. A great value.

To order, or for current price information, call(630) 837-2044 or fax (630) 837-1210 and ask

for item #ALS-1.





To order, or for current price information, call (630) 837-2044 orfax (630) 837-1210 and ask for item #MAN-1.


HPC has it all: Key Machines, Software, Books, Car

Openers, Pick Sets, Tools, Door Guards,and Key Cabinets


The number of applications for power door operatorscontinues to grow as A.D.A. legislation takes firmer holdaround the country. As the applications grow so does theneed to integrate these operators with other door hardwaresuch as electric strikes. Remembering a few fundamentalswill go a long way toward preventing problems when usingthese two products together.

In most system designs, thesame auxiliary device will beused to activate the automaticdoor operator and the electricstrike. This can be a cardreader, a key switch, keypad, orsimilar momentary contactswitch device. When this is thecase it becomes necessary tosequence the activation so thatthe operator is not trying toopen the door against theelectric strike. Many electricstrikes will not open when such pressure is applied againstthe retainer portion of the strike.

This sequencing is usually accomplished using time delayrelays inserted between the electric strike and the automaticdoor operator. As shown in illustration one, one relay is usedto insure that the electric strike opens before the automaticdoor operator while the second relay insures that the strikestays open long enough for the operator to move the doorpast the strike. Dor-O-Matic has designed special interfacecontrols that not only perform this interface function but alsoprovide a power source for the electric strike.

Some electric strikes include a monitor switch that can beused to send the activating signal to the automatic dooroperator and thus eliminate one of the relays used in thesystem described above. (See illustration 2.) It is importantto remember that all automatic door operators are requiredto have a built in time delay and that this time delay does notstart until the activation signal has stopped. Therefore, thesignal coming from the monitoring switch must be shut off

before theautomatic dooroperator can startits time delay andeventually closethe door. If notsequencedproperly, the doormay remain openfor excessiveperiods of time ornot close at all.

Another matter that frequently requires special attentionin these applications is the force required to close the dooragainst the electric strike. The types of automatic doorsbeing used for the vast majority of A.D.A. relatedinstallations are low energy automatic door operators asdefined in A.N.S.I. Standard A156.19. Low energy operatorsare required to open and close with reduced forces so thatthey can be used without extra safety devices such as photobeams and guide rails.

Unfortunately, these lower forces can leave the doorwithout enough closing force to get by a stiff electric strike.This is especially true for applications where high stackpressures are present. Some automatic door manufacturers,

For proper operation it’s imperative that the activation of a power door assistand an accompanying electric strike be

coordinated correctly.

Cover

Featur

e

by Mike Murray


1. Proper sequencing of door operation and electric strike operation are handled by two relays. Relay positions forboth fail secure and fail safe strike operation are shown.


like Dor-O-Matic, have designed products that have a “powerboost” feature to add extra closing force in the last fewinches of closing. If this feature is unavailable, the strike orlatch must be adjusted or the stack pressure relieved toinsure free closing of the door.

These issues discussed above are not really complicatedand can easily be addressed when first laying out the project.One method of addressing interface issues early is to writean operational narrative for the entrance when designing thesystem. This is a written description of the door’s operationduring each phase of opening. What will happen when thecard reader is activated? What will the strike do; what will

the automatic operator do, how is the time delayresponding? When will the door close? Is this the sequencedesired at all times of the day? This written narrative willuncover questions and problems while they are still easy toaddress.

Understanding these fundamentals will help you providean entrance that is safe and secure while being accessible toall. That is a gratifying experience for everyone involved.

For further information contact Dor-O-Matic, HardwareDivision at 800-815-1517 or 708-867-8500.

January 1995 • 41

2. In strikes containing switches, one relay can be removed. Again we have both fail secure and fail safe strikesrepresented.

by Robert G.SievekingItem #MSO-1 This book is astep-by-stepHow-To coursein safepenetration.Opening safes isone of the mostprofitableaspects of thelocksmithingbusiness. Now,with ModernSafe Openingyou’ll learn: the

theory of operation through troubleshooting andcombination changing to logical penetration siteselection and methods.Nearly all possible drill points are defined andillustrated by original photos and accuratedrawings. Drill and transfer, drill for the drop, drillfor the fence, drill for a relock trigger, or drill tosolve a specific lock malfunction. Each method isdefined, and you get step-by-step procedures.Back, side, top or face drill, under the dial oroutside the dial. You’ll learn it all!

To place an order or get current pricing, call (630) 837-2044.M

od

er

n S

afe

Op

en

ing Safe Opening Articles 1987

by Dave McOmie

Item #SA-1Now under one cover—all the informative safe

opening articles by expert safeman, Dave McOmie.This book contains articles reprinted from

The National Locksmith issues, August 1986through 1987.

Plus an all new introduction and new chapter on six-sided safes—not available anywhere else!Also features many enlarged photos for

easy identification.This book is a must for all serious safemen!

Safe Opening Articlesby Dave McOmieItem #SA-2

Dave McOmie’s original articles from when he firststarted writing for The National Locksmith are

reprinted in this book. The first five years or so ofDave’s work is presented here so if you don’t have

issues from the early 80’s you will not want to miss asingle drill point. Each article contains very valuable

information to anyone who ever works on safes.

To place an order or get current pricing,call (630) 837-2044.Click here for more informationClick here for more information

Every InstallationIs a Self-Portrait

Of the Person Who Did It.Autograph Your Work with Excellence.


THE SHOCKING REALITY

OF ELECTRONIC LOCKSMITHING

Kenneth Schwartz is the owner ofAA Quality Safe & Lock Service,

in Cape Coral, Florida. In addition tooffering a full range of safe and lockservices, Ken also sells, services andinstalls a variety of electric strikes inanswer to an increasing need forsecurity in Southwest Florida. I caughtup with Ken at his shop on Del PradoBlvd.

Ken, before we get into the businessof electric strikes, would you mindtelling our readers how you became alocksmith, and how long you’ve been atit?

I was in between jobs when I heardmy cousin had started a shop. It wasgrowing rapidly and he needed somehelp. I moved to the (Washington) DCarea, applied for the job, and he hiredme as an apprentice. After that, Iworked about ten years for a largefirm in the DC area. During that time Itook dozens of classes on all aspectsof locksmithing. In March of ‘84 Imoved to Florida and started AAQuality Safe and Lock.

What got you interested enoughin locksmithing that you decidedyou wanted to make a career of it?

Actually, becoming a careerlocksmith was something thatnever crossed my mind. Ithought: “Hmm, A locksmith?That sounds interesting.”Besides, as I said earlier, I wasbetween jobs and felt being alocksmith was as good as anyother way of making a living.Then, a strange thing happened.The more I learned, the more Iloved the job. And, you knowwhat, Jake? That’s as true today,as it was 21 years ago.

How’d you wind up in SunnySouthwest Florida after yourbeginnings in the D.C. area?

My parents retired here, andI used to visit them frequently. Ialways liked the area and when Ifelt the time was right, I decidedthat I’d like to start my ownbusiness here.

Ken, as a safeman, alocksmith and an electroniclocksmith, what do you perceive tobe the most challenging aspect ofyour chosen field?

I would have to say it’s a tossup between access control andsafe penetration or opening.However, I believe thatelectronics will be a big part ofboth in the future. As a result, I thinkthe challenge is going to be inadapting to the new products andservice techniques as they comealong. You know, the same challengeit’s always been. Being challenged tochange!

O.K., Ken. Obviously, you’reconvinced that electronics is going toplay a vital roll in the future of

locksmithing. And, although electricstrikes have been around for years, canyou tell us why you think today’saverage locksmith should be consideringadding electric strikes to their list ofservices if they don’t offer the servicealready?

If the average locksmith does notmove along in the same direction thatelectronics locks are moving, thatlocksmith will become an

anachronism in the very nearfuture. That doesn’t mean theywon’t have a trade to pursue - itsimply means that they’ll verylimited in their ability to make adecent living.

What suggestions would yougive to the locksmith that wants toenter this phase of locksmithingbut is electronics shy or feels theyjust couldn’t do electrical work?

First thing they need to do isget over the fear. To start with, indealing with electronic locks, thevoltage is very low ( usually 12 or24 volts) and the wiring isgenerally as simple as it can get.

Next, I would suggest thatthey go to as many trade showsas possible. Talk to the factoryreps. Get as much literatureabout as many different types of

THE SHOCKING REALITY

OF ELECTRONIC LOCKSMITHING

by Jake Jakubuwski


A NATIONAL LOCKSMITH PROFILE A NATIONAL LOCKSMITH PROFILE

Kenneth SchwartzOwner of AA Quality Safe & Lock Service

Locksmith Ken Schwartzsees electronics as an inevitable part

of the future. Locksmiths

who view themselves as security professionals

need to get involved.


locking devices as possible and learnas much about those products as theycan.

Talk to other locksmiths that arealready installing electronics - gettheir input. Take a basic electronicscourse at the local community collegeor Vo-Tech center. In other words:start learning and don’t stop.

Assuming the locksmith has theability and desire to do this type of workand, where required, has obtained theproper permits to do it, where wouldthey look for jobs of this sort? Can yousuggest a few simple ways they mightpromote their new service?

Office buildings are a good sourceof electronic strike work. And,convenience stores are turning moreto electric strikes for after-dark trafficcontrol and security.

Large industrial buildings, schoolsand governmental agencies are allgood prospects for electric strikework.

Call and find out who the person incharge of maintenance is, or who isresponsible for security. Introduce

yourself. Let them know that you areavailable and that you handle electricstrikes, etc. Offer to send them yourcard and literature, if you have any.Yellow page directory advertising canbe effective. So can direct mail fliers.And, of course, there’s alwaysknocking on doors.

Whatever you do to try to buildyour electronics business, beconsistent.

Ken’s given the fact that there aremillions and millions of non-electricand non-electro/ mechanical locks thatneed servicing now, and will needservicing for a long time to come, whydo you think a locksmith shouldconsider expanding into the electronicsarea?

Why shouldn’t they? They’realready in the security business aren’tthey? Electronics is the “next step,” soto speak. Whether a so-called regularlocksmith becomes an electroniclocksmith will ultimately depend onhow good a living they want to make.

Let’s face it, we’re all in business tomake money. Electronics can do thatfor the locksmith willing to expand

their horizons a little.

Considering that today is yesterday’sfuture, what do you think tomorrowholds for locksmiths in general?

Sometimes it really scary when Iread about licensing and legislationfor locksmiths. Yet, I ‘m sure thosethings will be a reality in our futurejust like electronics. I only hope we’reall smart enough to see to it that thelicensing and legislation is positive innature-and benefits us all.

But, overall, I think the future looksgood as long as we keep our skills andlearning current with the advancesthat we will see in security areas thatwe have not even begun to imagine.

I think electronics andelectromagnetics are still in theirinfancy and we’re only glimpsing whatis in store for this industry in thefuture.

But, I feel certain that if we keeppace with the changes that are sure tocome, we’ll be better off.

January 1995 • 43

A NATIONAL LOCKSMITH PROFILE A NATIONAL LOCKSMITH PROFILE

Safe Opening Articles 1987by Dave McOmie

Item #SA-1Now under one cover—all the informative safe

opening articles by expert safeman, Dave McOmie.This book contains articles reprinted from

The National Locksmith issues, August 1986through 1987.

Plus an all new introduction and new chapter on six-sided safes—not available anywhere else!Also features many enlarged photos for

easy identification.This book is a must for all serious safemen!


Dave McOmie’s original articles from when he firststarted writing for The National Locksmith are

reprinted in this book. The first five years or so ofDave’s work is presented here so if you don’t have

issues from the early 80’s you will not want to miss asingle drill point. Each article contains very valuable

information to anyone who ever works on safes.

To place an order or get current pricing,call (630) 837-2044.

by Carl CloudItem #DS-1One of the mostexpert safemen inthe country, CarlCloud has written avery importantbook on safeopening.One of the mostcritical parts ofopening a safe isknowing whereto drill theholes. Butwhat’s the best

way to drill asafe? How do you drill hardplate?

What am I looking at through the hole? What tools do Ineed? What do all these safe terms really mean?Exactly how do I defeat a relocker?This book answers all those questions and many more!

To place an order or get current pricing,call (630) 837-2044.

Drilling Safes


ASP Covers the World of Auto Locks


REAL TIME SERVICEWITH EDI➥

➥EDI(Electronic Data Inter-

change) technology hasbeen around for quite some time, butit has only been the last ten years thatwe have seen this technology utilizedin the locksmith industry. AmericanLock & Supply and Clark SecurityProducts were two of the firstwholesalers to introduce thistechnology to locksmith customers inthe early 1980’s. EDI allows acustomer to electronically send orreceive information to his/herwholesaler. The customer uses acomputer (generally a personalcomputer) and then sends informationvia communication software overtelephone lines where it is receivedand “read” by the wholesaler.

In our industry,the first uses ofEDI were to send“orders” to thewholesaler. Thereare several advan-tages to orderprocessing in thisfashion. First, alocksmith cancheck stock on lineby actually lookingat what the whole-saler has in stock.Second, it drasti-cally reduces er-rors because ite l i m i n a t e smisunderstandingsbetween a custo-mer and the insidesales departmentof the wholesaler.Third, many whole-salers offered dis-counts for custo-mers using EDIbecause it reducedtheir own internalcosts.

Since intro-duced in the 1980’sthe use of EDI

systems has spread and are nowavailable through many wholesalers.More importantly, the cost ofproviding these systems hasplummeted and, at the same time, thespeed of processing data hasdramatically increased. One of thebiggest bottlenecks in EDI processingwas the speed at which data wastransmitted across the telephonelines. Today’s modems (whichtransmit the data over phone lines)are at least eight times faster than theones available in the mid 1980’s. Inaddition, the technology “boxes”which allowed one computer tointerface with another became muchmore effective and cost efficient. Whatwas once a very cumbersome process

has become tremendously moreefficient and thus more effective touse.

With this new processing speed itsuddenly became very easy and quickto send orders and perform a varietyof tasks utilizing portions of thewholesalers data base. Today’s EDIsystems do a variety of tasks. Forinstance, you can check stock on anitem and, for those wholesalers withmultiple locations, look at theinventory at all locations in “real time.”In addition, some systems allow you toorder off line, that is, to build an orderon your own computer and then sendit to the wholesaler when you areready. Most EDI systems will then

by Sean B

. DeF

orrest


Faster and easier access to product pricing andavailability have future locksmiths depending on EDI.


With the proliferating use of the computer in the locksmith industry, companies such asAmerican Lock & Supply are making access to supplies and materials a snap through the use ofEDI.

MIN

I S

EC

TIO

N

➥

➥

transmit back a confirmation of whatwill be shipped. Other functionsinclude checking the status of youraccount which would includepayments and sales histories. Stillothers allow you to check up-to-datescheduled deliveries for products thatthe wholesaler has on order. All ofthese tasks and more can beperformed at blazing speed.

The technology costs will onlycontinue to drop, thus wholesalerswill be adding more and more optionsto their EDI offerings. In the nearfuture look to see systems which willhave catalog and template informationon line which can then be downloaded at the customer’s place ofbusiness. In addition, more and moreEDI systems will network with thelocksmiths own software forming abridge which automatically createsorders for the locksmith and sendsthem to the wholesaler. Such systemshave been in place with industrygiants such as WalMart for years andnow this technology is becomingaffordable to our industry.

One of the more “Cutting Edge”functions that is being introduced

includes the use of a bulletin boardwhich would allow a customer to readthe most current industry informationthrough his personal computer. Awholesaler puts on the bulletin boardthe latest price increases, productannouncements or promotions andimmediately it can be viewed by anycustomer that is on line. In the olddays you waited for the wholesaler’ssales representative to bring you up todate on this information. Now you canaccess this information quicklyvirtually 24 hours a day. One of themore exciting new options is makingelectronic mail available via EDItechnology so customers can sendand receive messages from theirwholesalers (or other customers!).

It is hard to predict where this newtechnology will take us but certainly itwill make information flow to theultimate customer faster and moreefficiently than ever before which, inturn, will create more salesopportunities for our industry.

The author is President/CEO ofAmerican Lock & Supply, Inc.



MIN

I S

EC

TIO

N

Modern SafeLocksby Mark Bates

You always wanted to makemoney servicing safes? Youneed this book!Even if you never touched a safebefore, you’ll be able to earnimmediate profits with thiseasy-to-use book!The book details: • Originalfactory combinations • Dialing instructions • UL andVdS ratings • Changinginstructions • Guide to changekeys • Safe lock glossary • Safelock compromises • ForbiddenzonesLearn how to service,troubleshoot and changecombinations on over 100modern key, combination andelectronic safe locks. Theprocedures and photos are verydetailed. Even a beginner can nowmake big profits in safe service!


Item #MSL-1

AntiquePadlocks

by Jack RobertsItem #PAD-1

Locksmiths constantly run intoolder and antique padlocks.

Finally there is a book to giveyou all the information you

need about these interestinglocks. Our manual shows youa photo of the lock the lockand gives you data on the

manufacturer, age,construction materials, and

even the value of the padlock!

Plus, we tell you how tomake an operating key, as

well as information on whichblanks to use, etc. A “Notes”section gives a history of thelock as well as any technicalinformation needed to help

you make a working key.Hundreds of types of locksare covered including iron,steel and brass padlocks.


Security SolutionsLocksmith Marketing

ProgramItem #SS-1

H ave you always wondered howto market your company and

grow your commercial accountswithout spending all your time doingit? Security Solutions is the answer!We provide you with four differentnewsletters, each of which is a fourpage self-mailer. We show you how topersonalize the newsletters for yourcompany, featuring your shop name,address and phone number. Four timesper year you simply have your localcopy shop print the number ofnewsletters you need...we even adviseyou on how to instantly access amailing list. Each newsletter is packed with security information on servicesand products which you provide, and which your commercial accounts need.Just mail Security Solutions to your current and potential commercialaccounts, and watch the business roll in!

To order, or for current price information, call (630) 837-2044 of fax (630) 837-1210 and ask for item #SS-1.Click here for more informationClick here for more information

The world’s

largest

producer of

automotive

locks and keys.


Integrity.Ingenuity....security

solutions.

A–Computer Stock Checking B–Co-Op Advertising C–Computer Access Programming D–MasterKey Codes E–Experienced Phone Reps.F–Merchandising 1–Fast Pay Discount 2–Full Line Inventory 3–High Security Specialists

January 1995 • 47

369

370

371

372

373

374

375

376

377

378

379

380

381

382

383

384

385

386

387

Y

Y

Y

Y

Y

Y

Y

Y

N

Y

N

Y

Y

Y

N

N

Y

Y

$500

$500

$500

500LBS.

$350

$300

$500

$600

$450

$500

$450

$25

$25

$25

$50

$25

$10

$35

$50

E2

C2

D3

B2

A1

ABF

C2

AE

CB

A

AU

TOM

OTIV

E PR

OD

UC

TSB

UILD

ER'S

HA

RD

WA

RE

ELECTR

ON

ICS

LOC

KS

MITH

PR

OD

UC

TSS

AFES

NO

RTH

EAS

TS

OU

THM

IDW

EST

WES

TN

ATIO

NA

LC

AN

AD

ATEC

HN

ICA

L SU

PP

OR

TS

HIP

PIN

G W

ITHIN

24 HO

UR

SM

AR

KETIN

G S

UP

PO

RT

TRA

ININ

G S

EMIN

AR

SW

ILL CA

LL AV

AILA

BLE

OTH

ER (see legend below

)M

INIM

UM

OR

DER

(blank if none)P

RE-P

AID

SH

IPP

ING

MIN

IMU

MC

RED

IT CA

RD

S A

CC

EPTED

CIR

CLE R

AP

ID R

EPLY N

UM

BER

PRODUCTS REGIONS VALUE ADDEDSOLD SOLD IN SERVICES MISC.DISTRIBUTOR

GUIDEThis Guide contains a great deal ofinformation about a variety ofdistributors. Product and Servicecategories offered are noted on theGuide. Some distributors offer ValueAdded Services not included in theregular categories, see the "Other"column and legend below.

MIN

I SE

CTIO

N

Y

Access Safe & Supply, Ltd.Burlington, Ontario. CanadaPhone 800-268-9033 Fax 905-319-0366

Ace Lock & Security Supply Union, NJPhone 800-ACE-LOCK Fax 800-ACE-FAX4

Acme Security SystemsSan Leandro, CAPhone 800-348-2263 Fax 510-483-4500

Acme Wholesale Distributors, Inc.New Orleans, LAPhone 800-788-2263 Fax 504-837-73217 Branch Locations. Call for the location nearest you.

Allied Locksmith SupplyYoungstown, OHPhone 800-544-2102 Fax 216-726-0865

Ambassador Wholesale Safe DistributorsLake Hiawatha, NJPhone 800-999-5510 Fax 201-402-1447

American Lock & Supply, Inc.Anaheim, CAPhone 800-854-8775 Fax 800-833-139715 Branch Locations. Call for the location nearest you.

Andrew's Wholesale Lock SupplyLebanon, PAPhone 800-544-0519 Fax 717-274-8659

Anytime Securtity ProductsHermosa Beach, CAPhone 800-539-2427 Fax 619-726-4363

Aristo Sales Co.Long Island City, NYPhone 800-221-1322 Fax 718-937-5794

Armstrong's Lock & Supply, Inc.Atlanta, GAPhone 800-726-3332 Fax 800-998-17335 Branch Locations. Call for the location nearest you.

Bell's Security Sales, Inc.Bloomfield, NJPhone 800-772-6666 Fax 201-743-3761

Blaydes Lock Co.Washington, DCPhone 800-BLAYDES Fax 202-832-1359

Boston Lock & Safe Co.Brighton, MAPhone 800-252-5757 Fax 617-787-3425

Boyle & ChaseHingham, MAPhone 800-325-2530 Fax 617-335-5342

Canada Lock Products, Ltd.Toronto, Ontario, CanadaPhone 800-268-1306 Fax 416-248-99452 Branch Locations. Call for the location nearest you.

Clark Security ProductsSan Diego, CAPhone 800-542-5625 Fax 619-565-46059 Branch Locations. Call for the location nearest you.

Commonwealth Lock Co.Cambridge, MAPhone 617-876-3301 Fax 617-661-3168

Craftmaster Hardware Co., Inc.Hackensack, NJPhone 800-221-3212 Fax 201-646-0181

DiMark International, Inc.Santa Maria, CAPhone 800-235-2435 Fax 805-928-8034

Door Closer Service Co, Inc.Washington, DCPhone 800-566-0606 Fax 202-529-7826

Electric Lock SupplyLos Angeles, CAPhone 800-858-1726 Fax 310-568-1507

Eljay ExpressWheeling, ILPhone 800-432-1311 Fax 708-480-1383

EMG AssociatesChicago, ILPhone 800-468-3558 Fax 312-649-0787

Farfisa IntercomsMiami, FLPhone 800-806-0227 Fax 305-593-9823

Herbert L. Flake Co.Houston, TXPhone 800-231-4105 In Houston 713-926-3200 Fax 713-926-3399

Fortress Safe & LockCincinnati, OHPhone 800-562-0295 Fax 513-772-4397

Fradon Lock Co., Inc.Syracuse, NYPhone 800-447-0591 Fax 315-472-0958

Garden State Hardware WholesalersPlainfield, NJPhone 800-544-0616 Fax 908-753-2040

Grace's Wholesale & Supply DivisionHastings, NEPhone 402-426-2737 (between 1 & 9 p.m. Central Time)

R.A. Graham Co.Worchester, MAPhone 800-333-3933 Fax 508-755-6584

Hardware Agencies LimitedToronto, Ontario, CanadaPhone 800-268-6741 Fax 800-903-3303

Hardware Sales & SupplyLivonia, MIPhone 800-521-0955 Fax 800-272-44092 Branch Locations. Call for the location nearest you.

H. Hoffman Co.Chicago, ILPhone 800-323-1918 Fax 708-456-09517 Branch Locations. Call for the location nearest you.

Intermountain Lock & Supply Co.Salt Lake City, UTPhone 800-453-5386 Fax 801-485-72051 Additional Branch. Call for location.

JLM Wholesale, Inc.Oxford, MIPhone 800-522-2940 Fax 800-782-1160

A.T. Jones Co.Detroit, MIPhone 800-735-4570 Fax 313-965-1093

Jo-Van DistributorsToronto, Ontario, CanadaPhone 800-268-5731 Fax 800-286-5010

Kenco Supply Co.Omaha, NEPhone 800-228-2266 Fax 800-228-4175

AU

TOM

OTIV

E PR

OD

UC

TSB

UILD

ER'S

HA

RD

WA

RE

ELECTR

ON

ICS

LOC

KS

MITH

PR

OD

UC

TSS

AFES

NO

RTH

EAS

TS

OU

THM

IDW

EST

WES

TN

ATIO

NA

LC

AN

AD

ATEC

HN

ICA

L SU

PP

OR

TS

HIP

PIN

G W

ITHIN

24 HO

UR

SM

AR

KETIN

G S

UP

PO

RT

TRA

ININ

G S

EMIN

AR

SW

ILL CA

LL AV

AILA

BLE

OTH


)M

INIM

UM

OR

DER

(blank if none)P

RE-P

AID

SH

IPP

ING

MIN

IMU

MC

RED

IT CA

RD

S A

CC

EPTED

CIR

CLE R

AP

ID R

EPLY N

UM

BER



A–Friendly Personal Service B–Computer Stock Checking C–Fast Pay Discounts D–Fax Order Discounts E–Computer Order Entry F–Electrical Advice Available G–USCAN "Exclusive Brand" H–Free Catalog I–In-House Custom Masterkey System 1–24 Hour Support 2–Dealer Programs 3–Custom Modifications 4–LSDA "Exclusive Brand" 5–ADA Approved Hardware 6–Special Order Availability


$25

$25

$50 $750

$45

$50

$20

$50

$25

$50

$3000

$350

$400

$500

$500

$250

$200

$50

$100

$1500

$500

$500 outof city$350 in

Dependson

product

Varies Y

Y

Y

N

N

N

Y

Y

Y

Y

N

N

N

Y

Y

Y

Y

Y

Y

Y

388

389

390

391

392

393

394

395

396

397

398

399

400

401

402

403

404

405

406

407

12

C3

A

E

BD

D4

F5

G6B

B

HI

MIN

I S

EC

TIO

N

A–Priced Packing Lists B–Volume Discounts C–Monthly Specials 1–Computer Stock Checking 2–Locksmith Service Center 3–Price List on Disk

January 1995 • 49

AU

TOM

OTIV

E PR

OD

UC

TSB

UILD

ER'S

HA

RD

WA

RE

ELECTR

ON

ICS

LOC

KS

MITH

PR

OD

UC

TSS

AFES

NO

RTH

EAS

TS

OU

THM

IDW

EST

WES

TN

ATIO

NA

LC

AN

AD

ATEC

HN

ICA

L SU

PP

OR

TS

HIP

PIN

G W

ITHIN

24 HO

UR

SM

AR

KETIN

G S

UP

PO

RT

TRA

ININ

G S

EMIN

AR

SW

ILL CA

LL AV

AILA

BLE

OTH


)M

INIM

UM

OR

DER

(blank if none)P

RE-P

AID

SH

IPP

ING

MIN

IMU

MC

RED

IT CA

RD

S A

CC

EPTED

CIR

CLE R

AP

ID R

EPLY N

UM

BER



Key Mart, Inc.Stuart, FLPhone 800-228-7755 Fax 407-220-7920

Key Sales & Supply Co., Inc.Detroit, MIPhone 800-445-(KEYS) Fax 313-931-7758

Kramer Boys Supply Co.Trenton, NJPhone 800-222-2692 Fax 609-586-0512

Lockmasters, Inc.Nicholasville, KYPhone 800-654-0637 Fax 606-885-7093

Locks Co.Miami, FLPhone 800-288-0801 Fax 305-949-3619

Lockwise Products, Inc.Miami, FLPhone 800-447-6616 Fax 305-623-9564

Mayflower Sales Co., Inc.Brooklyn, NYPhone 800-221-2052 Local 718-622-8785 Fax 718-789-8346

Maziuk & Co., IncSyracuse, NYPhone 800-777-5945 Fax 315-472-31111 Additional Branch. Call for location.

McDonald Dash Locksmith Supply, Inc.Memphis, TNPhone 800-238-7541 Fax 901-366-0005

McManus Locksmith Supply, Inc.Charlotte, NCPhone 800-438-6567 Fax 704-332-8664

Midwest Wholesale HardwareKansas City, MOPhone 800-821-8527 Fax 800-621-65811 Additional Branch. Call for location.

Mid-South Locksmith SupplyMemphis, TNPhone 800-238-6166 Fax 901-795-3475

Monaco Lock Co., Inc.Jersey City, NJPhone 800-526-6094 Fax 800-845-LOCK

J. Nathan Hardware Specialties, Inc.Rochester, NYPhone 800-634-2580 Fax 716-325-7196

Northeast Lock Corp.Clifton, NJPhone 800-524-2575 Fax 800-524-2576

Northwest Lock & SupplyAlbany, ORPhone 800-359-9425 Fax 503-928-9338

Omaha Wholesale HardwareOmaha, NEPhone 800-238-4566 Fax 800-538-4566

Orchard Lock Distributors, Inc.Hamden, CTPhone 800-233-2146 Fax 203-624-4083

Pasek Corp.South Boston, MAPhone 800-628-2822 Fax 800-262-0547

MIN

I SE

CTIO

N

408

409

410

411

412

413

414

415

416

417

418

419

420

421

422

423

424

425

426

Y

N

Y

Y

Y

Y

Y

Y

Y

N

Y

N

Y

N

Y

Y

Y

N

Y

$450

$350

$600

$350

$500

F.O.B.Detroit

$125$350$500

Varies

$300

$500

$500

$750$100

$25

$25

$25

$35

$25

$10

$35

$25

$35

AB

1A

1,23,BC

ABC

AU

TOM

OTIV

E PR

OD

UC

TSB

UILD

ER'S

HA

RD

WA

RE

ELECTR

ON

ICS

LOC

KS

MITH

PR

OD

UC

TSS

AFES

NO

RTH

EAS

TS

OU

THM

IDW

EST

WES

TN

ATIO

NA

LC

AN

AD

ATEC

HN

ICA

L SU

PP

OR

TS

HIP

PIN

G W

ITHIN

24 HO

UR

SM

AR

KETIN

G S

UP

PO

RT

TRA

ININ

G S

EMIN

AR

SW

ILL CA

LL AV

AILA

BLE

OTH


)M

INIM

UM

OR

DER

(blank if none)P

RE-P

AID

SH

IPP

ING

MIN

IMU

MC

RED

IT CA

RD

S A

CC

EPTED

CIR

CLE R

AP

ID R

EPLY N

UM

BER



Agences W. Pelletier (1980) Inc.Montreal, Quebec, CanadaPhone 514-276-6700 Fax 514-276-9413

E.L. Reinhardt Co.Vadnais Heights, MNPhone 800-328-1311 Fax 612-481-0166

R & H Wholesale SupplySan Francisco, CAPhone 800-367-5625 Fax 415-863-7046

Richmond Industrial SupplyStaten Island, NYPhone 800-462-9997 Fax 718-981-5665

Rininger Lock & SupplyLemon Grove, CAPhone 619-463-0170 Fax 619-697-2570

Rudy'sCleveland, OHPhone 800-248-7839 Fax 216-641-0060

Safemasters, Inc.Alexandria, VAPhone 800-633-9977 Fax 703-750-181410 Branch Locations. Call for the location nearest you.

Security Equipment SupplySt. Loius, MOPhone 800-325-0221 Fax 314-298-89623 Branch Locations. Call for the location nearest you

Security Lock DistributorsNeedham, MAPhone 800-847-5625 Fax 800-878-6400

Septon, Inc.Malden-On-Hudson, NYPhone 800-537-8752 Fax 914-246-3416

Serrubec, Inc.Montreal, Quebec, CanadaPhone 800-361-0243 Fax 514-631-0494

M. Shepse Co., Div. American BionicsPittsburgh, PAPhone 800-666-6007 Fax 412-381-5122

Silver Sales, Inc.Plano, TXPhone 800-258-5625 Fax 214-618-1897

So-Cal Lock & SupplyNational City, CAPhone 800-521-3551 Fax 619-474-2440

Southern Lock & SupplyPinellas Park, FLPhone 800-282-2837 Fax 800-447-22993 Branch Locations. Call for the location nearest you.

Stone & Berg Wholesale Locksmith Supply Co.Worcester, MAPhone 800-225-7405 Fax 800-535-5625

M. Taylor, Inc.Philadelphia, PAPhone 800-233-3355 Fax 215-288-2511

Top Notch Distributors, Inc.Honesdale, PAPhone 800-233-4210 Fax 800-854-41461 Additional Branch. Call for location.

Tram International, Inc.Delray Beach, FLPhone 800-843-2440 Fax 800-448-8280

A–Full Line Catalog B–Monthly Fliers C–Monthly Specials D–MasterKeying Charts E–Volume Discounts F–Baxter System Codes G–SpecialLocksmith Programs H–Annual Trade Show I–Computer Stock Checking J–Customer Referral Program 1–Sargent & Greenleaf 2–Catalog &Brochure Available 3–No Wait Counter Pick-up 4–Free Giant Catalog 5–Late Hours 6–Bi-Monthly Newsletter


MIN

I S

EC

TIO

N

$35

$25

$35

$25

$10

$15

$500

$450

$250

$125

$250

$350

$400

$75

Varies

Varies

Varies

Varies

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

N

Y

Y

Y

Y

Y

Y

Y

Y

427

428

429

430

431

432

433

434

435

436

437

438

439

440

441

442

443

444

445

CD

I

12

A3

I2J

IJ

26

GH

45

AB

CE

AF

January 1995 • 51

AU

TOM

OTIVE P

RO

DU

CTS

BU

ILDER

'S H

AR

DW

AR

EELEC

TRO

NIC

SLO

CK

SM

ITH P

RO

DU

CTS

SA

FESN

OR

TH EA

ST

SO

UTH

MID

WES

TW

EST

NA

TION

AL

CA

NA

DA

TECH

NIC

AL S

UP

PO

RT

SH

IPP

ING

WITH

IN 24 H

OU

RS

MA

RK

ETING

SU

PP

OR

TTR

AIN

ING

SEM

INA

RS

WILL C

ALL A

VAILA

BLE

OTH


)M

INIM

UM

OR

DER

(blank if none)P

RE-P

AID

SH

IPP

ING

MIN

IMU

MC

RED

IT CA

RD

S A

CC

EPTED

CIR

CLE R

AP

ID R

EPLY N

UM

BER



Turn 10 WholesaleMarietta, OHPhone 800-848-9790 Fax 800-391-4553

Tweed's Locksmith SupplyPortsmouth, VAPhone 800-544-4482 Fax 804-399-1636

U.S. Lock Corp.Brentwood, NYPhone 800-925-5000 Fax 800-338-56253 Additional Branches. Call for the location nearest you.

Wilco SupplyOakland, CAPhone 800-745-5450 Fax 510-653-5397

Zipf Lock Co.Columbus, OHPhone 800-848-1577 Fax 800-228-6320

MIN

I SE

CTIO

N

A–Free Freight B–Product Selection C–Price & Stock Guides D–Catalog On Disk E–Key Blank Cross Reference Program F–Computer Stock Checking G–Keying Services Available

446

447

448

449

450

N

Y

Y

Y

N

$400

$500

$250

$25$750UPS

Zones2-4

$10

$50

$50

ABC

FG

DE

Dave McOmie’sPenetration Party

by Dave McOmie — Item #PP-1

Uncensored! • The Safes! • The Tools! • The Action! • The PerfectOpenings! • The Bloopers and Blunders! • The Slick Tricks!

No one knows safes and safecracking like Dave McOmie. When itcomes to drill points, he is the master of all masters. This book takesyou inside Dave’s mind, and allows you to follow his thought processas he analyzes eachopening. Dave gives youhis thoughts on the bestopening method, thenthe opening is performed.And then Dave honestlyappraises each methodand offers improvementswhere he feels hisoriginal methods wereless than perfect.

To order, or for currentprice information, call(630) 837-2044 or fax(630)837-1210 and askfor item #PP-1.

The UltimateSafe OpeningCollectionfrom Dave McOmie and The NationalLocksmithItem: USOC-1This monster collection of safeopening data runs over 1,000 pages

of pure information. You get drill points, relocker drillpoints, hard plate specs, and step by step photos on almost every safe youare ever likely to encounter in your career. Included are containers fromvirtually every manufacturer and they run the gamut from regular safes, allthe way up through rated safes, as well as the ultra high security.

Learn about the tools you need. We reveal every opening techniqueknown to man in extraordinary detail, with photos, illustrations and easyto read text. You’ll also know of the possible pitfalls and errors on eachopening, and you’ll avoid making those mistakes!

Never in history has such a complete collection of safe openinginformation been available in one place!

(Note: This collection is comprised of collected NSO materials. NSOmembers will already have all or part of this information.)

To order, or for current price information, call (630)837-2044 or fax(630)837-1210 and ask for item #USOC-1.


Don’t panic!

We have Security

Exit Devices.

Two of the most vulnerable areas ofhomes and businesses are the

windows and patios, or sliding glass,doors. Many OEM locks are often lessthan adequate from a securitystandpoint, leaving residents unsecureand landlords and the hospitalitymarket liable.

One incident that I recall involved awoman in Chicago that was raped inher apartment. The courts agreed withher claim and found the building’sowner negligent for failing to install adoor viewer.

I’m not passing judgment on themerits of that case or others similar toit. What I am stressing is: There’s apotential bonanza out there forlocksmiths that are willing torecognize a need and fill it!

So, in an effort to help you fill thenext need you see for securing awindow or a patio door, the followingare highlights of some productsavailable to you and the companiesthat make them.

Pado Security Products covers awide variety of mortise locks for steeland wooden doors, including a highsecurity cylinder model.

The PADO 430 hook bolt is wellengineered and designed to outlastthe patio door into which it isinstalled. (See illustration 1.)

For increased security, a hook boltarrangement in the lock includes apin. This pin extends into the strikepreventing the door from being liftedout of the track.

by Jake Jakubuwski


155

20

13.5

102

27.2

29

18

14

1. The Pado 430 hook bolt forsliding doors. Note the anti-lift pinindicated by the arrow.

More money, better security.Two issues that go

hand-in-hand with most locksmith’s goalscan be achieved by offering

patio door and window locks.

Safe Deposit Box Service

by Robert G. SievekingItem #SDBS-1

There is gold in safe depositboxes! Not just money stored

inside them, but gold to beearned by opening and servicing

these containers. But whatshould I look for? Where do I

drill for the fence or gates? CanI refinish this door easily? Can I open this door withoutdamaging the lock? Where can I find space and depth

dimensions? I have a key, but why can’t I retract the bolt?How do you make a drill pattern for these locks? I pulled

the nose, now what do I do?There are a lot of questions, and Safe Deposit Box

Service gives you all the answers! You’ll learn thecomplete theory of the principles and operation of the

lever lock, as well as the tools necessary to defeat them.You’ll be able to open these locks with minimum damage

to the lock and container.Original photos and accurate drawings on nearly every

page lead you to quick and easy success when faced withlock boxes, safe deposit boxes and inner safe doors.


Antique Padlocksby Jack Roberts

Item #PAD-1

Locksmiths constantly run into olderand antique padlocks. Finally there isa book to give you all the information

you need about these interestinglocks. Our manual shows you a photoof the lock the lock and gives you dataon the manufacturer, age, construction

materials, and even the value of thepadlock!

Plus, we tell you how to make anoperating key, as well as information

on which blanks to use, etc. A “Notes”section gives a history of the lock aswell as any technical information

needed to help you make aworking key. Hundreds of types

of locks are coveredincluding iron, steel and

brass padlocks.To

plac

e an or

der o

r

get c

urrent pric

ing,

call (

630)

837-2

044.


SRi and Tech Train Productions arethe automotive specialists - your best

source for automotive tools,manuals, and videos.


T h e l o c kcomes completewith mountingscrews, escut-cheons a doublecylinder profilecylinder, strikeplate and twokeys and isavailable to thelocksmith for alittle under $10.

For more information contactPADO at 800-523-9877.

MAG Engineering has always beena leader in patio door and windowsecurity products.

For double hung, wooden sashwindows, MAG has their WoodWindow Locks that are easy to install,look good, prevent the window frombeing raised and retail for about $1.79.(See photograph 2.)

January 1995 • 53

3. MAG’s sliding door lock allows the door to beopened for ventilation.

2. MAG window locks.

Basic Masterkeying Courseby The National Locksmith

Item #MK113 Lesson 450 page course

The Basic Masterkeying courseis designed for the locksmithwho wishes to become proficientin Basic Masterkeying.

—Course Includes—• 13 step-by-step lessons, 12self quizzes, 4 tests, 1 midtermexam and 1 final exam.• Correctly laying out a buildingfloor plan.• Using the floor plan to create the System ExpansionSpecification and Levels of Authority.• Selecting a proper Top Master Key.• Setting up a Key Bitting Array for a Single or TwoStep System.• Using the Key Bitting Array to develop a ProgressionChart following the Standard Progression Format andthe Odometer Method.• Picking out Master Keys and assigning key numbersusing the Standard Key Coding System.


Flat RateManual

by Janice PateItem #FRM-1

Now you can easily “Price for Profit!”

Chapters allow you to price jobs in allthese categories: Domestic and foreign autos, codekeys, conversions, duplicate keys, first key or rekey,installations, key-in-knob locksets, lockouts, masterkeysystems, miscellaneous, safe and vault work and trip charges.

The Locksmith Handbookby The National LocksmithItem #LH-1

This book contains the most importantarticles published in The NationalLocksmith over the last five years.

Owning The Locksmith Handbook is like having five yearsworth of back issues combined into one!

Featured articles are on: automobile opening and servicing,motorcycles, computer programs, technical tips, safe openingand service, lock picking, lock installation and service, doorclosers, impressioning, business practices, humor and more!


National Auto LockService, Inc. offers awide range ofequip-

ment andservices forthe Automotive

Locksmith. From toolsand hard to find key

blanks to transponderprogramming, we cantake the mystery out

of car service.Weaccept credit card

orders, and can shipCOD. Contact us forthe latest in automo-

tive technology.Click here for more informationClick here for more information

To be a World Leader YouNeed Quality Products,

Innovative Technology andStrong Partners.



MAG’s Patio Door Dead Lockcomes in a single (8600 series) ordouble cylinder model and (8500series) is simple to install and locksthe door in a closed position or in an

open, ventilationposition. (Seephotograph 3.)The unit retailsfor $9.99 in thesingle cylinderversion and$29.99 in thedouble cylindermodel.

M A G ’ sSliding DoorBar is a quick,easy, econom-

ical and effective solution to patio doorsecurity. (See photograph 4.) TheSliding Door Bar not only keeps thedoor shut, it can be used in aventilation mode also. The SlidingDoor Bar retails for $16.99.

For sliding windows, MAGmanufactures the Sliding WindowLock (#8830) which retails for about$6.99. (See photograph 5.) It is fast andsimple to install, and like otherwindow locks, you don’t usually selljust one.


5. For those typically hard to secure sliding windows,MAG offers the Sliding Window Lock.

7. Master LockCompany’snew entry inthe patio doorsecuritymarket - TheSecurity Bar.

6. Built to meet pool side safetyrequirements, the Latchmatic Lock(above) with the Slidematic Closer(not pictured) are a perfect matchfor patio door security and isoffered by Slideline, Inc. 8. The Emtek 206 patio door lock.

4. MAG also has a security bar for sliding patio doors.This unit offers the ventilation option as well.



Contact MAG Engineering at 800-624-9941.

Slideline, Inc. has developed twoproducts for patio door security. Oneis the Latchmatic Lock, which retailsfor $31, and the Slidematic Closer,which retails for $189 (standard duty)and $225 (heavy duty). (Seephotograph 6.)

Both of these products not onlyincrease the security of a sliding patiodoor, but in many localities enable

users to comply with state and localcodes for doors leading out toswimming pools.

The Slidematic Closer coupled withthe Latchmatic Lock, not only closesthe door automatically, but it latches itsecurely as well. The Latchmatic Lockhas both a deadlocking feature and ahold open mode depending on theneeds of your customer.

Contact David Prochaska ofSlideline Products for moreinformation, 800-545-0544.

Master Lock Company made it’sentry into the sliding door securitymarket with the introduction of it’smodel 251D Patio Security Bar. (Seeillustration 7.) It costs about $18 tothe locksmith.

The Patio Security Bar is made ofaircraft grade aluminum for strength,security and light weight. The bar haspadded ends to prevent marring thedoor or frame and a patented quick-locking feature that ensures the barwill stay in place.

The Patio Security Bar fits mostpatio doors up to 43-7/8” wide so thatone size bar covers most applications.The pivoting ball in the foot of the baradjusts to small differences in doorsand assures rapid and properinstallation of the bar, without tools.The bar both prevents the door frombeing lifted from the track and servesas a visual deterrent. Contact yourMaster Lock Distributor, or MasterLock at 414-444-2800.

Emtek Home Security Products(formerly Watchguard) not onlymakes patio door bolts and severalstyles of window locks, they also

manufacture door security products,door viewers, and mortise locks forpatio doors.

Their high security door bolt(Model 206) not only secures a patiodoor in a deadlocked position but canbe used to secure the door in an open,ventilation position. (See photograph8.) Easy to install, this unit retails forabout $20.

Emtek’s model 204 is a versatilelock that can be used as a patio doorlock, a sliding window lock, or adouble hung wooden sash windowlock. (See photograph 9.) It is keylocking and retails for under $16.

Photograph 10 is Emtek’s SashLock (Model 270), which retails forunder $4. Although this sash lock isnot key locking (the model 273, at$5.02, is) the release has to be trippedbefore the lock can be turned. Thisprevents someone from running aknife blade between the sashes andunlocking the window. (Seephotograph 10.)

Call 800-356-2741 for an Emtekdistributor near you.

O. K. friends and neighbors, thereyou have it. I didn’t cover all themanufacturers of window and patiodoor security products, but I havegiven you enough information to “getya’ cracking,” so to speak.

So check out the window and patiodoor security market. You might besurprised at just how much moneyyou can make with these products.Y’all, heah?


9. The Emtek 204 is a multi-purpose lock that can beused for sliding windows, patio doors and similarapplications. 10. Emtek’s 270 sash lock.


Safe OpeningArticles 1987

by Dave McOmie

Item #SA-1Now under one cover—all the

informative safe opening articles byexpert safeman, Dave McOmie. This

book contains articles reprintedfrom The National Locksmith issues,

August 1986 through 1987.Plus an all new introduction and new

chapter on six-sided safes—notavailable anywhere else!

Also features many enlarged photosfor easy identification.

This book is a must for all serious safemen!


Dave McOmie’s original articles fromwhen he first started writing for TheNational Locksmith are reprinted in

this book. The first five years or so ofDave’s work is presented here so ifyou don’t have issues from the early

80’s you will not want to miss asingle drill point. Each article containsvery valuable information to anyone

who ever works on safes.



Choose S&GComptronic

electronic safelocks for...security...

technology...tradition.


INDUSTRY INTERVIEW…

With roots deep in the world ofsafes, this month The National

Locksmith speaks with Judd H. Penske,National Sales Manager for MeilinkSafe Co., a Fire King International Co.

Can you describe a little of the historyon how you came into the safe field,Judd?

Actually, I have been associatedwith safe business all of my life. Myfather started with Meilink as a DistrictSales Manager in 1938, just a few yearsbefore I was born. Even during myyears in school and my retailing careerone eye was on Meilink. I joinedMeilink in 1972 as an independentrepresentative in Ohio and Michigan.At the time I joined Meilink as acommissioned sales representative Ihad little experience in sales, muchless safes. During this period, we had16 weeks delivery time on insulated fileand 4 weeks on safes. Drive by commission, it didn’t takeme long to figure out that if I wanted income I had to sellproduct that returned the fastest commissions, thus safesmade sense. But more importantly when I called on thelocksmiths, I found them enjoyable, honest and willing toexplain their views, not only on our product, but thecompetition. Thus, I’ve developed a respect andfriendship with the industry people which I enjoy today.

I joined Fire King in December of 1991, after theacquisition of Meilink by Fire King. At the time, Fire Kingofficials were looking for someone to transition andfamiliarize them with the Meilink product line as well asthe locksmith market, a market Fire King had only begunto enter prior to my arrival. As The Meilink SafeCompany has grown, it has required more and more ofmy attention. For the past year, my total responsibilitieshave been the direction of the Safe Division as NationalSales Manager. Additionally, I am responsible forcontinued improvement in quality, while allowing the newmanufacturing facility to run efficiently.

What has been the most enjoyable aspect of working inthis industry?

The most interesting aspect of this business has, ofcourse, been the people. The large diversity of people that

I encounter in the day-to-day businessat Meilink and the extensive travelmakes the job welcoming eachmorning. I have found the averagelocksmith to be very honest andforthright in his approach to business.This of course, has its drawbacks, notto say people should be dishonest butbe more deliberate and research theirbusiness a little closer before making adecision.

What has been the most challengingaspect of working in the industry?

As I have said many times in myclasses and seminars, the locksmithindustry has to change to more of a“service and merchandising” industryrather than a “repair and replace.”Someday, someone is going to figureout how to do what the locksmith isdoing and put it in 10,000 sq. ft withnew trucks and lower paid employeesand the average locksmith today mayfind himself on the short end of thebusiness. This has happened in the

food, and office products business as well as appliances,building products, and other industries.

Trying to get locksmiths to challenge themselves andbegin to sell and merchandise themselves and theirbusiness has been the most challenging part of my 20some odd years in the business. Many of the new breed,those with some college education, have been making thetransition very well and are doing very well in theindustry. If a locksmith chooses to niche market, he cando very well. Although in doing so, he tends to limithimself and the amount of income to be derived.

What changes have you seen take place in the industry?Why?

The change that seems to have effected the industrythe most is the influence of imported products. Safes fromThailand, Japan, China, South America, South Africa andother locations have proliferated in our industry. While Idon’t have any particular problems with the importsthemselves many of them claim both fire and burglaryresistance without an identifiable label that the consumercan understand. We receive calls weekly concerning fireor burglary ratings on the imported safes. The consumersasking what the label means. My own personal

BBUUSSIINNEESS SS BBRRIIEEFFSSNews from the

Locksmithing Industry


Judd H. PenskeNational Sales ManagerMeilink Safe Co.

Indiana Cash Drawer Company,The POSource®, has promoted the

following employees: RobertBenavides to the position on VicePresident of Sales and Marketing,Randy Boone to the position of VicePresident of Finance andAdministration, and Phil Stephensto the position of Vice President ofOperations.

Ralph P. Nussbaum, CEO andPresident of National Safe &

Lock Company, Inc. announces theappointment of Jonathan C. Jablonsas Executive Vice President of thecorporation’s recently expanded Lock

Division. Mr Jablons will beresponsible for publicity, marketing,promotions and sales of all nationalaccounts. Raymond L. Jablonsassumes the corporate position ofSenior Vice President of Financeand Administration.

Ace Lock & Security Supply,Union, NJ has announced a new

toll free number to service itscustomer base: 1-800-ACE LOCK

Stan Gabay, Director of Sales &Marketing advises that this easy-to-remember phone number may beused to order door hardware or to

contact the firm’s AXCESS division,when ordering card access orelectronic door products.

JLM Wholesale is now offeringscheduled seminars for up to eight

people per seminar. Topics coveredwill be door and frame design, BasicDoor Hardware, Access Controlapplications, Security hardwarespecification and a little informationon installation techniques. Classes willbe taught at JLM’s facilityapproximately once per month, toreserve your spot call Kenn Andridgeat 800-522-2940.

January 1995 • 61

…INDUSTRY INTERVIEW(continued)

experience has been that many ofthe dealers selling the importedproducts are not familiar enoughwith the product they are selling.

What direction do you think theindustry is taking? Why?

As most people will agree, thesafe industry is slow to change. Withthe exception of the composite safe,little has changed over the past 20years or so. I believe in the nearfuture manufacturers will respondmore to consumer desires. One ofthose desires is safes that have bothfire and burglary protection. Inrecent years, Meilink has made aconscious effort to introduce newitems that feature both the U.L.rating for fire and burglary.Meilink’s new 40,000 square footfacility is the first manufacturingfacility built solely for the productionof insulated and composite safes inthe past several decades. This willallow Meilink to become moreefficient and become one of theleaders in the industry.

Secondly, the move to electroniclocks is moving in the rightdirection, although I believe thereare still too many problems with thereliability of the lock on insulatedsafes. It seems the inherent moistureand other components of the safescause a higher failure rate than onnon-insulated safes. I think theelectronic lock manufacturers areaddressing that problem.

How do you think these changeshave affected the locksmith?

Relating to the fire and burglary

rating and what the customerperceives, many of the locksmithtake the road of least resistance andsell only the price on the unit fearingthat the customer will not buy. Ithink the locksmith, as a securityexpert in the eyes of the consumer,has an obligation to explain to thecustomer exactly what they arelooking at and the options that are inthe marketplace. Then, if thecustomer still chooses a non-rate,inexpensive unit, fine, at least thelocksmith has properly informed thecustomer.

What changes do you see necessaryif the locksmith is to be successful inthe future?

Upgrading their image. That isthe single most important factorlocksmiths can do to improvethemselves. The upgrading mustcome not only in their personalapproach to the customer, but alsohow their business is perceived bythe customer. We receive calls fromconsumers regarding their safes andmany of them tell us they arereluctant to call a locksmith becausethey are not sure of their reputationand presentation. Locksmiths aregoing into people’s homes andbusinesses and should be asprofessional as the people they callon. I have noticed in the past halfdecade that we are seeking morelocksmiths in uniforms and even tiesin the field. More are taking a look atwhat their shop and trucks look likeand upgrading them to meet thecustomer’s expectations.

What do you feel the future holdsfor the locksmiths and their role insecurity?

“To the diligent and hardworkinggo the spoils.” Also, foresight andplanning help a lot. Thoselocksmiths who identify theirmarket, their customer and theircustomers’ needs will grow into thetotal security center for thecustomer. The security business is aservice business and the customerwants service. The sooner thelocksmith adapts his operation to atotal customer oriented business, themore successful the locksmith willbe.

How do you think the locksmithcan best serve his customer?

I touched on this previously. Ibelieve the most important factor fora locksmith is to keep focused on thecustomer and the customer’s desiresconcerning hours the locksmith isopen, the type of products carriedand services offered. The locksmithshould look at his competitors,determine why they are successfuland shoot for that type operation.

Any additional comments?In closing, I would encourage the

locksmith to abandon the status quo,strive harder, look for ways to betterserve their customer. I wouldencourage locksmith to include“value added” services to theircustomers, such as free service callafter purchasing a safe. These typesof value added items will separatethem from the discount stores andthe price only dealer.

Also, expect more fromwholesalers and vendors, let themknow how you feel. The only way weas a manufacturer can improve is toreceive feedback from the locksmith.

“Well, it looksl i k e D r .

Ted needs to pre-scribe some of hissmart pills again,”Don said. “Did youread this articleDennis Copelandsent us fromBrownsville?”

“The one about the Harlingenwoman found murdered in her car,whom they suspect embezzled over$100,000 by forging payroll checksagainst her employer’s account?”

“That’s the one.”

“No, I haven’t read it yet,” I said.

Don did a double-take. “Then howdid you know all about it?”

“Oh, I just glanced at the headlineand skimmed over the first fewparagraphs, but I haven’t had time toreally read it, yet. Why? What else didit say? Were they able to recover anyof the money?” I asked.

“At her house, they found $4,600along with a locked safe,” Don replied.

“What was in the safe?”

“Nobody knows. Apparently it wasstill locked, when the paper went topress.”

“What kind of safe was it?Something difficult to get open?”

“This just says Police confiscatedeverything on Friday, but werewaiting until Monday to get the safeopened.”

“Why?” I asked.

“That’s where the smarts come in,”Don replied, grinning “They didn’twant to pay a locksmith overtime toopen it on a weekend.”

“You’re kidding.”

“Nope.” Don shook his head.“That’s what it says, right here in thearticle. See?” He pointed to the words

in the news clipping. By this time, hewas chuckling out loud.

“Reminds me of that time a manwas locked inside his company’s vault,a couple of years ago. Remember?” heasked, wiping tears from his eyes, “theoffice manager was calling around toall the locksmiths in town, makingprice comparisons for getting the vaultopen, while the poor fellow wasbanging on the door, begging forsomebody to get him out. When themanager learned everybody’s rateswere double on weekends, he decidedto leave the man in there untilMonday morning.”

“Oh, yes,” I said. “And if Iremember correctly, the businessowner had several cases of prizedimported beer and rare wines storedin the vault.”

“Right.” Don began to chortle. “Theguy who was locked inside didn’t carewhether he was rescued or not by thetime a locksmith got the door open onMonday morning.”

He got out his handkerchief towipe his eyes again.

“But even that is not the best storyabout the smarts I’ve heard lately,”Don said.

“Idon’t guess you’ve read aboutyesterday’s kidnapping, yet?” Don

reached for the local morningnewspaper to show me the headlines.“Three women stopped at that littledrive-in cafe on the Del Rio highway,just west of town,” he said. “A manpulled up behind them in an 18-wheeler, walked over to their car,yanked the door open and draggedthe driver out. Before her startledcompanions could react, the manhauled the woman to his rig and droveoff with her.”

“Why, Don! How awful! Have theyfound her?”

“Fortunately, the woman’scompanions recognized the man.

They called the police, gave them afull report, and within an hour the guywas located at a rental house on OakStreet.”

“Was the woman all right?” I asked.

“Apparently, the report ofkidnapping had been exag-

gerated. When the police broke in,they found the couple in a somewhatcompromising entanglement.”

“So, what did they do to the guy?”

“Nothing.”

“Nothing?”

“The woman refused to presscharges.”

“Why should she have to? Isn’t akidnapping charge made by thestate?” I asked.

“Maybe, but the woman said herfriends were mistaken, that there wasno kidnapping. She claimed she hadgone with him willingly.”

I shook my head in disbelief. “Boy,I’ll bet her friends who reported theincident felt foolish.”

“No doubt,” Don agreed. “Butthat’s not all. Better call Dr. Ted andbe sure he has plenty of those smartpills. Looks like we’re going to need tohand out a passel of them, this year.Read this,” he said, pointing to aparagraph toward the end of thenewspaper article.

According to the report, when theman’s truck had been spotted outsidehis house by a patrolman, thepatrolman called in for a back-up.Dispatch then relayed the informationto headquarters, where the chief ofpolice was standing by.

“How many officers are at thescene?” asked the chief.

“Only one,” the dispatcher replied,“but he has the house surrounded.

LLIIGGHHTTEER R SSIIDDEE

bySara Probasco

Smart Stuff


Send in yourtips and win.

HOW TO ENTERSimply send inyour tip abouthow to do anyaspect oflocksmithing.Certainly, youhave a favorite way of doing thingsthat you'd like to share with otherlocksmiths. Write your tip down andsend it to: Jake Jakubuwski,Technitips Editor, The NationalLocksmith, 1533 BurgundyParkway, Streamwood, IL 60107.Remember, tips submitted to otherindustry publications will not beeligible. So get busy and send inyour tips today. You may win cashor merchandise. At the end of theyear, we choose winners for manymajor prizes. Wouldn't you like to bea prizewinner in 1995? Enter today!It's easier than you think.

BEST TIP OF THE MONTHIf your tip is chosen as the best tipof the month, you'll win $50 in cash!Plus, you may win one of the largeyear end prizes!

EVERY TIP PUBLISHED WINSYes, every tip published wins aprize. If your tip is printed, you'll win$25 in Locksmith Bucks. You canuse these bucks to purchase anybooks or merchandise from TheNational Locksmith. Plus, every tippublished will win a copy of theTechnitip Handbook.

January 1995 • 77

TTEECCHHNNIITTIIPPSS

byJake Jakubuwski

Helpful hints

from

fellow locksmiths

These Prizes Awarded Each Month!

•All-Lock Foreign Auto Service Lists - Worth Over $225.00!•HPC Pistolpick•Silca Rubberhead Keyblanks (100 Blanks)•ESP PR-13 Professional Lock Pick Set•Sieveking Products EZ-Pull GM Wheel Puller•Technitips Handbook

Submit your tip and win!

Do you believe it? It ’s 1995already!

Wow! Time sure gets away fromyou when your having fun, doesn’t it?

Speaking of fun. Take a look atthat year-end winners list! I’ll bet youa nickel to a bent nail, they’re havingfun with their brand-new code books,key machines, cash and other greatprizes they won in our year-enddrawing!

And, you know what? They werewinners because they sent in a tipthat I was able to use in this column.That qualified them for the fantasticyear-end prizes they received. Notonly that. They also received amonthly prize for the month in whichtheir tip was printed!

Why don’t you get on the WinnersWagon and send me your tip rightnow? Who knows, maybe you couldbe this year’s winner of a Silca BravoUSA semi automatic duplicator, orThe Punch Machine by HPC, or$100 bucks in cash or a set of TheNational Locksmith code books!

At the very least, if I use your tipin the Technitips column, I’ll sendyou a Technitip Handbook andtwenty-five Locksmith Bucks. C’mon!Whadaryawatinfor, Christmas?

Finally, congratulations to all the1994 winners, your tips made my job

a lot easier and a lot more fun. And,from all of us a The National, wehope you have a happy andprosperous New Year! Y’all, heah?

Tip Of The MonthHyundai Safe Opening

The Hyundai electronic safeModel #KSG-4500J is made inKorea and is probably very similarto many other electronic safesimported from the Orient. This safemeasures 17”H x 13”W x 142”D.The door thickness is 2-3/8” and,there is one locking bolt at 8-1/2”down from the top and 1-3/16” in onthe bolt side. Handle rotation isclockwise.

To open this safe, all you need isa good, strong rubber band, thatyou would wrap around the top ofthe handle and the bottom hinge.Now provided that the safe is notbolted down, lift the entire safeabout 12” from the floor and drop iton it’s bottom. It should pop rightopen.

The electric solenoid is veryweak and the shock of the safehitting the floor will usually cause itto release.

If the safe is bolted down, thendrilling a hole will be necessary.Drilling from the rear of the safe isthe best approach. Drill a hole at 7”up from the bottom and 4” over

All-Lock Foreign Auto Service ListsWinnerGM Lock Decoder

I’ve only been a locksmith for ashort period of time. When I tried todecode my first GM lock cylinder, Idisassembled it and read the depth ofeach wafer against the wafers in myautomotive pinning kit. The next day,I ordered a GM lock decoder from mysupplier.

Maybe it was just the way I usedthe decoder, but one time I would geta “good” reading and the next time Iwould not. After struggling with the


from the hinge side. This will enableyou to see a chrome swivel coverplate. Manipulate the plate aside anddepress the silver-colored button thatyou see with another probe.Depressing that button will displaythe combination on the front panel.

If you can’t get to the back of thesafe, then top drill for the solenoid.Measure in 1-1/4” from the front and5-1/4” over from the opening edge.Use a probe to push down on thesolenoid and turn the handle.

You could also drill the safe fromthe hinge side at 7” up, and 2-5/8”back, use a hooked probe to push theswivel cover out of your way, andanother probe to depress the silverbutton. However, that route could bea little tricky.

The digits on the touch pad of thesafe are grouped as follows:

C D E F8 9 A B

S4 5 6 70 1 2 3

To open the safe, press the “S”button and then the correctcombination.

To change the combination: Press“S” and the display will read“READY”. Next, enter the newcombination. Then, press the blackbutton on the rear of the door, underthe swivel plate.

Ken SchwartzFlorida

Old Pick

#4ScribeMark

#2ScribeMark

About3/16"Wide

Illustration 1

Safe Deposit Box Service

by Robert G. SievekingItem #SDBS-1

There is gold in safe depositboxes! Not just money stored

inside them, but gold to beearned by opening and servicing

these containers. But whatshould I look for? Where do I

drill for the fence or gates? CanI refinish this door easily? Can I open this door withoutdamaging the lock? Where can I find space and depth

dimensions? I have a key, but why can’t I retract the bolt?How do you make a drill pattern for these locks? I pulled

the nose, now what do I do?There are a lot of questions, and Safe Deposit Box

Service gives you all the answers! You’ll learn thecomplete theory of the principles and operation of the

lever lock, as well as the tools necessary to defeat them.You’ll be able to open these locks with minimum damage

to the lock and container.Original photos and accurate drawings on nearly every

page lead you to quick and easy success when faced withlock boxes, safe deposit boxes and inner safe doors.






To order, or for current price information, call (630) 837-2044 orfax (630) 837-1210 and ask for item #MAN-1.


It’s not safe unlessit’s Schwab Safe.

problem for a while, I came up withthis idea to make my own decoder.

I took an old pick, and filed it asshown in illustration one. The decodertip is just a little over 1/2” long. Then,I used a GM cylinder that I had loadedwith a #2 and a #4 wafer, insertedsprings and put on a retainer.

Next, I applied pressure to the sidebar and raked the two wafers until theside bar depressed. I inserted the tipof my decoder tip of my decoder intothe slot with the #2 wafer in it andwhen it bottomed out I used a dentalpick to inscribe a line as shown in theillustration.

I repeated the same procedure overthe slot that had the #4 wafer in it andscratched another line with my dentalpick.

To decode a cylinder with anunknown wafer combination I pick thecylinder, use a small clamp to hold thesidebar in and insert my decoder inthe first wafer slot. If the reader doesnot drop to the first mark I made, thewafer in that position is a #1. If it dropseven with the first line, it is a #2.

If the reader drops between thefirst and second scribed marks, thewafer is a #3, if it drops with thesecond mark even with the top of theslot, it is a #4 and, if the reader dropspast the second mark, the wafer wouldbe a #5!

Now, I read GM cylinders quicklyand accurately - every time I reallyhope this will help another locksmiththat might have had the same problemI did.

James EubanksVermont

HPC Pistol Pick WinnerTamper Proof Screw Removal

I had been hearing from otherlocksmiths in my area that they wererunning into mortise lock rekeys onnarrow stile aluminum doors wherethey either could not get the face plateoff the door, or were having a difficulttime doing so, because someone hadused tamper resistant screws to attachthe face plate to the locks

Well, last week, I ran into the sameproblem. Apparently, the locksmiththat had serviced the lock before mehad used two 8-32 socket or hex-pin,tamper resistant screws when theyhad replaced the face plate.

I do not have the special drivers toremove this type of fastener and knewthat trying to drill them out would bemessy and time consuming. Also, I feltthe customer might not appreciate mybeating on the door with a hammerand small chisel, trying to remove thescrews.

My solution? I removed a smallscrewdriver from my tool box andused my Dremel tool to modify it asshown in photograph two. Theindentation in the center of the tool’sblade fits over the pin. The outer legsfit into the corners of the screw.

Then, by inserting the tool into thetamper resistant screw, applyingturning pressure and tapping on thehandle of the tool with a smallhammer (to keep the tool seated andvibrate the tight screw loose), Ibacked the screws out of the face plateand completed the rekey my customerhad called me out for.

Pete GambleN. Carolina

Editor’s Note: Tamper resistant fasteners are

turning up in more applications everyday. I would recommend that anylocksmith that encounters thesefasteners on a regular basis purchase aset of drivers to remove and install themwith.

Tanner Bolt & Nut, 800-456-2658,sells a security bit kit for about $48.

Also, Steve Young, of Tech TrainProductions, 800-3560136, has a set ofsecurity drivers available.

And, to the best of my knowledge theTamper Proof Screw Co. of Hicksville,N.Y., 516-931-1661 also offers tools forinstalling or removing tamper resistantfasteners.

January 1995 • 79

Photograph 2

by The National Locksmith

Item #TIPS-2

Here’s one of the most useful books ever

available to the locksmith! Three hundred

pages filled with tips and tricks from

veteran locksmiths. You’ll learn all the

secrets other locksmiths use to save time

and make extra money on the job. You’re

GUARANTEED to make back the cost of

this book in no time flat.

Categories of tips include: Car Opening, Domestic and Foreign Auto Service,

General Automotive, Making & Modifying Locksmith Tools, Padlock Tips, Mortise Lock

Tips, Lockout Tips, Door Control, Safe Procedures, Picking & Impressioning, Modifying

Key Machines and much, much more.

The Ultimate Technitips Collection is worth its weight in gold! In this one volume,

you’ll have the tricks and secret methods developed over many years by HUNDREDS

of locksmiths.

TheUltimate

Technitips

Collection

TheUltimate

Technitips

Collection

To order, or for current price information, call (630) 837-2044 or fax (630) 837-1210 and ask for item #TIPS-2.

01090

2030

4050

60

7080

Lockmasters has a 44 year history of training

security professionals.

Lockmasters has a 44 year history of training

security professionals.


Silca Rubber Headed KeyblanksWinnerMuffin Pan Organizer

Here’s a helpful idea to keep youorganized when doing rekey ormaster key work.

Get an 18 cup muffin pan (9”x12”)and attach a drawer pull type handle inthe center of the pan. You can use thispan to conveniently carry lockcylinders, knob sets or plugs, etc.

To use the pan, make out threelabels with the door number and otherinformation that you need on them.One label is for the door, one label is

for the knob or cylinder that youremove and the third is for the muffinpan.

This way, you’re sure to always getthe correct hardware back on thecorrect door. As you finish each door,you can remove the labels from thelocks, the door and the muffin pan,

On a final walk through, checkingkeys, you can remove any labels youmay have missed.

Darlene and John ThompsonCalifornia

ESP PR13 Pick Set WinnerVATS Saver

When interrogating a GM vehicleequipped with the new 10-CutVATS/PASSKEY system, only cut oneside of the test key for yourinterrogation.

Then, on the next VATS equippedvehicle (with a 10-cut ignition) you do,cut the other side for interrogation ofthat vehicle.

These keys (B&S part #597263)cost about $5.00 each. This idea cancut your interrogation key costs inhalf!

Scott WhiteGeorgia

E-Z Pull GM Wheel Puller WinnerGM Wheel Puller Alternative

Before becoming a locksmith, Iworked as an auto mechanic. I gottired of missing, stripped and bentbolts in the steering wheel puller, anddecided I had to do something torectify the problem.

I used a nut and bolt of the propersize (for the car I would be workingon) and threaded the nut about fivethreads onto the bolt. Then I brazedthe bolt in place.

Next, I removed the nut from thesteering column, and attached mynut/bolt assembly. I would only“snug” the nut by hand, turning it untilmy bolt bottomed out against thesteering wheel shaft. Then, using asmall hammer, I would gently tap thehead of my bolt. The steering wheelwould just pop loose.

Now, as a locksmith, I have severalsizes of my nut/bolt combinations inmy tool box ready for any steeringwheel I have to pull. They work greatand last a long time.

Doug CoburnCalifornia

Editor’s Note: I made up one of these tools and

gave it a try on an old Chevy in thelocal junk yard. It did work, although ittook several not so gentle “taps” to breakthe wheel loose. However, I only triedthis on one vehicle and the wheel couldhave been frozen to the shaft.

It should be noted, however, that GMsteering shafts (and possibly shafts byother manufacturers) are made of twotelescoping shafts held together by twonylon pins. During a frontal collision, ifthe steering wheel suffers an impact of200 pounds or morel, the entire steering


MotorcycleLock Serviceby Shirl Schamp — Item #MLS-1

T his book contains full details on everything the locksmith needs toknow about motorcycle locks. It is recommended study material for

those who want to test their knowledge.

The AutomotiveEdgeby The National Locksmith — Item #AE-1Auto Service. Get the Edge!

• Over 400 pages of automotive locksmith serviceinformation, covering an incredibly wide range of cars andservice procedures. Comes in a 3-ring binder. • HighSecurity cars such as Lexus, BMW and Mercedes. •Domestic cars, including columns and airbags, VATS, PATS,and MATS. • Full service for popular foreign cars by variousmanufacturers. • Disassembly for ignition, glove box trunk and door locks, plus codelocations. • Key blank information plus car opening instructions. • Hundreds of huge photosshowing step-by-step service.

NOTE: The Automotive EDGE contains a compilation of NLAA materials. NLAA members arealready in possession of these materials.

Auto Lock Serviceby The National Locksmith— Item #ALS-1• Covers opening and service techniques. • Covers over 15 different locks and manufacturers. • Learn how to make keys.

Chapters cover service and repair on the following: Audi, BMW, Corsica, Corvette, Daihatsu,Datsun, Ford Probe, Ford Festiva, Honda CRX, Honda Acura, Hyundai, Mercedes, MitsubishiPrecis, Pontiac Fiero, Suzuki Samurai, Toyota and Volvo. A great value.

To order, or for price information,

call (630) 837-2044 or fax (630) 837-1210.Click here for more informationClick here for more information

HPC, Inc.Designing Excellence and

Manufacturing Qualitysince 1956

shaft and mast jacket will collapse. Thisis to prevent the driver from beingimpaled during a collision.

Many locksmiths (and mechanics)have made the error of either strikingthe steering shaft or jerking up sharplyto remove the steering wheel. In eithercase, if more than 200 pounds isemployed, the nylon pins will shear andthe column will collapse. This, ofcourse, can only be repaired by aqualified mechanic.

My recommendation is that this toolbe used only where a standard pullerdoes not work, and even then, withgreat care!

Technitip Handbook WinnersVice Grip Third Hand

When I have to rekey a Weiserlock, I pull the tail piece out and use apair of Vise-Grip’s for my third hand tohold the tailpiece extended.

I find that to be fast, simple andinexpensive.

Juanita RamseyTexas

New VATS MachineIf you do not have the new VATS

10-Cut key decoder, you can use your

old decoder to decode the new keysfor duplication.

Insert one of the plasticinterrogation keys in your currentdecoder. Place the customer’s 10-Cutkey between the two wires on theplastic key and read the resistance onyour old decoder.

Remember, this is only for keyduplication and not interrogating thenew system.

R. K. BaikoWisconsin

Titan TipThis tip is about creating the first cut

of the Titan key. I have a Code 2 codecutting machine. After reading the articlein the April 1994 issue of The NationalLocksmith, I decided to experiment withwhat I had. I have a Belsaw 200duplicator which gave me the idea.

After comparing the diameter ofthe Belsaw duplicating cutter, to theFramon code cutter, I found they werevery close.

The Belsaw duplicating cutter isabout .002” to .003” less than theFramon cutter. By making allowancesfor this, I found it to be a perfect wayto make the first cut on the Titan key

blank without any modification oradded expense.

For those of you that do not have aBelsaw duplicating cutter, you canorder one from Foley Belsaw for$20.25, plus S&H. Order part #LDN5720612.

The Belsaw cutter has a 3/8” boreand a 2.372” diameter and is .190”thick, and works very well on theFramon 2 code machine.

Howard Verret ErathLouisianna

Titan Lock BarThe National Locksmith’s article in

the April, 1994 issue regarding Titanwas very thorough and informative.However, I found one problem. Whenrekeying these locks as stated in thearticle, the locking bar does get in theway of the plug’s removal. Whenreplacing the spring that holds thelocking bar in place, I fumbled forabout 30 minutes and nearly lost thespring at one point.

The simplest way I found to replacethe spring is to insert the spring up-side-down and then turn it right side up.

Marv MeyerIowa

January 1995 • 81

Basic Masterkeying Course

by The National LocksmithItem #MK1

13 Lesson 450 page courseThe Basic Masterkeying course is

designed for the locksmith whowishes to become proficient inBasic Masterkeying.

—Course Includes—• 13 step-by-step lessons, 12 selfquizzes, 4 tests, 1 midterm examand 1 final exam.• Correctly laying out a buildingfloor plan.• Using the floor plan to create theSystem Expansion Specification andLevels of Authority.• Selecting a proper Top Master Key.• Setting up a Key Bitting Array fora Single or Two Step System.• Using the Key Bitting Array todevelop a Progression Chartfollowing the Standard ProgressionFormat and the Odometer Method.• Picking out Master Keys andassigning key numbers using theStandard Key Coding System.



Guide ToElectronic LocksmithingItem #El-1

Everyone knows there’s big moneyin selling, installing and servicingelectronic security such as maglocks, electronic strikes, and simpleaccess control. But how can youlearn all the skills needed to make

the profits?This book starts with the all the basics that every locksmith

needs to know about electricity, and teaches you every step ofthe way. You’ll learn everything you need to know to handleeverything from closed circuit TV, simple access control,wireless security, and electronic locks.

To order, or for current price information, call (630) 837-2044 or fax (630) 837-1210 and ask for item #EL-1.Click here for more informationClick here for more information

Installation Tools

The Professionals Choice

portion of theN o v e m b e r

1994 General Testarticle states that in1994 the ownershipof Corbin Russwinchanged to Yale.We have beeninformed by Cor-bin Russwin thatthis is not true andis the result of erroneous information(rumor) that has been circulatedthrough small portions of the industry.

According to Corbin Russwin, theyare a wholly owned subsidiary ofWilliams Holdings. Although bothCorbin Russwin and Yale are ownedby Williams Holdings, they have beenand will remain separate operatingentities offering their own lines ofdoor hardware.

The Pak-A-Punch by A-1 SecurityManufacturing Corp. is offering fivenew automotive Quickchange Kits.The Pak-4C is use for vehicles usingthe DC1/X54 or the supercedingDC3/X121 keyblank, including theBuick Opel, Chevrolet Luv Truck andSprint, Dodge and Plymouth(Mitsubishi), Hyundai, Isuzu andMitsubishi.

The Pak-T3 isused for Toyotavehicles using theR5001 to 6924, S1 to699 and K1 to 4570code series, as wellas the ChevroletNova (Toyota) doorkey.

The Pak-T4 isalso for Toyota andcovers those usingthe F5951 to 9710and P7001 to 8500code series, as wellas the ignition keyfor the ChevroletNova (Toyota).

The Pak-G5 covers Isuzu, GM andGeo using the A8001 to 9400 codeseries.

And the Pak-G6 includes the Geo,Isuzu and Suzuki using the 18100 to19299 and D4001 to 6000 code series.

Finally, recently introduced is thePak-NSK for late model Nissan andSubaru. This multi-purpose kit allowscutting of Nissanand Subaru vehi-cles using the F001

to 1000, W001 to 1000, M4000 to 5000,M5001 to 6000, M6001 to 7000, M7001to 8000 and the X, Y 1 to 8000 codes.

Vincent Glispie of Glispie Lock inChicago, Illinois forwards thisinformation. From USA Today, anarticle by Bruce Horovitz and EarleEldridge state that customers are nowmore concerned with the securitytheir vehicles offer. The article pointsout the expanded use of security

BBIITS & TS & PPIIEECCEESS

byTom Seroogy

Informative Tidbits for

the Security Industry


A

1. This conical shaped G505-747 slide catch springhas been upgraded to a newer cylindrical shapedspring C604-191.

2. Upgrading the D30, D40, D44, D55, D73 and D85require replacing the slide catch and slide catchspring. The D50 and D53 also require changing theslide and rollers. 3. Schlage’s new S200 interconnected leverset.

systems on newer vehicles and vehicleadvertising. Most noteworthy is thatprint ads for BMW’s 7 series modelsstate that no keyhole is present in thepassenger door in order to “‘reducethe chance of curb-side break-ins.’”

Vince also sent us a copy of adisplay ad featuring a free plasticspare key offered by the AmericanAutomobile Association. According tothe ad, anyone who wishes can visittheir local AAA office and have thespare key cut for them free of charge.After speaking with AAA, Vince statesthat the program won’t be set to runfor a few months yet.

Schlage replacement parts for theD series lockset. The following list ofconversions have been made toincrease the strength and reliability ofthe Slide Catch Spring of these units.

Old Part # Replcmnt Part # Descr.

C303-009 C303-006Slide & Rollers, all functions

C503-315 C604-187Slide Catch, restoring, D30, 40, 44, 55,

73, 85C503-316 C604-188

Slide Catch, non-restoring, D53

C604-256 C604-190Slide Catch, lever designs, D50

G505-747 C604-191Slide Catch Spring, D30, 40, 44, 50, 53,

55, 73, 85.

A new cylindrical design of theSlide Catch Spring replaces theformer conical shape. (See illustration1.) Because of this design difference itis necessary to also replace the SlideCatch (all models) and, with the D50and D53, the Slide & Rollers whenmaking the upgrade. (See illustration2.)

Schlage is introducing the newS200 series interconnected entryleverset. Used for light and mediumuse commercial applications, the S200is perfect for apartment and hospitality(hotel, motel) applications.

Although listed as a Grade 2 lever,the unit actually exceeds ANSIA156.12-1992 Grade 2 requirements.Coming standard with a 6 pin (keyed 5pin) cylinder, the S200 is also availablewith Schlage IC core and Primuscylinders. The unit includes a 1”interconnected deadbolt in 2-3/8”, 2-3/4” or 5” backsets. (See photograph3.)

January 1995 • 83

High Security SafesVolume 1by Dave McOmieItem #HSS

Includes safes by the following• Bernardini • Bischoff • Chatwood-Milner • Chubb • Fichet-Bauche • ISM

• Kaso • Lord • Original • SLS • Opening jobs often start at $1,000.00! •Over 225 pages of complete openings! • Each safe described with many

photos! • Contains many FULL PAGE photos! • Very detailed opening procedures!• These are theworld’s toughest safes! Learn to open High Security Safes now!

High Security SafesVolume 2

by Dave McOmieItem #HSS-2

Dave McOmie’s famous book, The National Locksmith Guide toHigh Security Safes, Volume 2 is here! Dave’s biggest book yet,

totalling 250 pages, it is packed with great information and photosof high security safes by Ambassador, Atlas, Bernardini, Bischoff,

Bridgeman, Bumil, Diebold, Emo, Hadaikan, International,Kumahira, Mancini, Mosler, Original, Rosengrens, Securifort, and Vector. Included are

many opening tips designed to make your life easier.


Item: DM-10 •Every single NationalLocksmith article by DaveMcOmie from August 1986through August 1996 under onecover!• This book has a magnificentand durable casebound hardcover!• Over 500 high-gloss pages –our biggest safe book ever!• Each page is numbered andlabeled by month and year.This makes for easy reference.• Dave has written an extensive Index, which categorizes eachsafe by manufacturer and type, and lists the corresponding pagenumbers and month/year. This is an indispensable aid to thetechnician who needs to locate information NOW!• Dave has re-read each article and groaned a few times due toinaccurate or incomplete information. Where appropriate he haswritten Retrospective Comments at the end of the articles. Theseare sometimes information-loaded, sometimes humorous, butalways worthwhile.• Warning: The Naked Lady Mosler has been uncensored!!!To order, or for current price information, call (630) 837-2044 orfax (630) 837-1210 and ask for item #DM-10.10

Yea

rs o

f Dav

e M

cOm

ie


ASP - Your AutoService Center for

the World

o n c e a l e dclosers areg e n e r a l l y

chosen when con-cerns about poten-tial vandalism orthe aesthetics of anexposed productmake a surfacecloser undesirable.These closers maybe concealed over-head in the frame,in the floor, or inthe door itself.

This article willaddress only over-head concealedclosers. Typicallynon-handed, theoverhead concealedin-the-frame closersare often chosenover floor closersdue to the exten-

sive on-site preparation required tolocate the cement case and prepare forthe floor closer.

Overhead concealed closers areoften used by frame manufacturers,particularly by manufacturerssupplying the aluminum storefrontindustry, though hollow metal andwood configurations are also available.They permit the manufacturer tominimize the possibility of on-siteinstallation problems by completelypreparing the frame in the factory. Insome cases, the closer installationitself is included in the factorypreparation.

TWO CATEGORIESOverhead concealed closers can be

divided into two broad categories:

Narrow profile products well-suitedfor standard 1-3/4” x 4” aluminumtube headers or for hollow metalframes with a typical 2” frame face.

Adaptations of surface closers thathave been modified for mounting intothe header. Closers in this class oftenhave exposed arms which can be thetarget of vandalism or can createaesthetic discord. These applicationsrequire a larger header or frameprofile, which in turn usually requirecustom frames.

STANDARD APPLICATIONSApplications for overhead

concealed-in-the-frame closers can bedivided into retrofit or replacementand new construction. Retrofit/re-placement applications normally occuras the result of product failure orobsolescence. Often, only the closeritself needs to be replaced, rather thanthe door or frame.

The replacement of an existingproduct with a dissimilar product, orthe retrofit of a new door and frameinto an existing opening will generallyhave the same requirements as newconstruction.

A market often passed by, take a short trip through the installation of a concealed door closer.

by Lynn Eisenhauer


CC

1. The DORMA RTS 88 overhead closer.

2. The Dorma RTS-RFR replacement package includes (A) Closer, (B) CoverPlate and (C) End Load Arm.

A

B

C


Overhead concealed-in-the-frameclosers suitable for retrofit appli-cations are made by a number ofmanufacturers. Like DORMA’s RTS88 overhead concealed closer, theycan be interchangeable. (See photo-graph 1.) When an existing closer isjudged to be obsolete and in need ofreplacement with a contemporary unit,complete replacement packages areavailable. (See illustration 2.)

DORMA, for example, offers RFRreplacement packages in slide trackand end load options. Retrofit withthese packages is as simple asremoving the old closer and replacingwith the new product. In someinstances, the retrofit may require aconversion bracket or brackets andwhich are furnished with the RFRpackage. (See illustration 3.)

All center hung doors are notnecessarily double acting. They canbe made to be single acting byapplication of a blade stop or alternatetypes of stops.

END LOAD OR SIDE LOADWhether the door is to be made

end load or side load depends on howthe door and frame are supplied bythe manufacturer and how it is to beinitially installed. In side loadapplications, the door is placed on thebottom pivot and pushed up into theopening to engage with the closerspindle while the door is in the closedposition.

End load installation requiresrotating the closer spindle 90 degrees,then placing the door on the bottompivot portion and engaging the armwith the rotated spindle at 90 degrees.

Closer size must be correctlyselected in accordance with theappropriate closer, specific door widthand whether it is an interior orexterior opening. Refer to theindividual manufacturer’s size chartfor proper selection. (See illustration4.)

Locksmiths are often called upon toinstall overhead concealed closers.Let’s follow a standard center hung,end load installation. The installationof the closer itself is a very simple,straightforward process. However, asthe previous discussion indicates, theinstallation is done in concert with theactual hanging of the door, andlocksmiths who tackle this projectshould plan accordingly. Two people

will be needed to safely and efficientlycomplete the installation.

1. Begin with a thorough survey ofthe opening. Be certain that the

opening is dimensionally correct,plumb, level and square.

2. Install the closer mountingbrackets in the frame head and attachthe closer to them. Make sure thecloser is located in accordance withthe manufacturer’s installationinstructions. Supporting the closer,tighten the fasteners securely.

3. Install the closer cover plate overthe closer. This must be done beforeproceeding to hang the door,CAUTION: The misguided pursuit oftotal concealment has led to manyproblems with this kind of installation,as people attempt to abandon use ofthe removable cover plate in favor ofconcealment by a permanentcasement. Never permanently concealthe closer in a manner which willprevent later access.

4. Install the top arm in the topchannel of the door. Mostmanufacturers can furnish top arms invarious depths to coincide withspecific aluminum frame web depths(l”, 7/8”, 3/4”, 5/8”). (See illustration5.)

Check the top door prep if done bythe manufacturer to make sure it iscorrectly prepared to accept the topcloser arm. Check to make surechannel depth dimensions matchmanufacturers recommendations. Ifthe top of door is not machined,prepare it according to the installationinstructions.

5. To prep the bottom of the door,follow the same process used with thetop of the door. If the prep was done

January 1995 • 89


3. The Dorma RTS 88 end loadcloser, double or single acting, foraluminum door and frame with a7/8” top rail. Included are the (A)Closer, (B) Cover Plate, (C) TopArm, and pivot options (D) TallThreshold Pivot, (E) Tall FloorPivot, (F) Short Threshold Pivot,and (G) Short Floor Pivot.

4. DORMA end load arm for aluminum or tempered glass doors. Arm depth(A) varies according to top door tail channel depth.

A

BC

D E F G


by the manufacturer,check for accuracy.If not, then proceedto machine perinstructions. Notethat for both top andbottom, shims orblocks may berequired if channeldepths do not matchm a n u f a c t u r e r srecommendations.

The floor orthreshold will needto be prepared toaccept the bottompivot on which thedoor will rotate.Different floor ma-terials (wood, concrete, marble, etc.)will require different treatments.

6. Close the “Sweep and LatchValves” of the closer. Place the door inclose proximity to and at 90 degrees tothe opening. Use a large crescentwrench (the 4” wrench out of thekitchen drawer won’t work) to rotatethe closer spindle 90 degrees.CAUTION: A common field error withend load applications is the failure torotate the closer spindle beforeinstallation. In this situation, attemptsto push the door closed will result inthe closer attempting to reopen it to 90degrees.

7. Place the door on the bottompivot and engage the top arm with thecloser spindle. Use two people tominimize the risk of injury. The closedsweep and latch valves will preventthe closer spindle from rapidlyreturning to place.

Check to assure that the closerspindle is fully engaged with the arm.If it is not, the bottom pivot must beadjusted to raise the door until there isfull engagement. Failure to do so will

cause loosening of the clamping blockand damage to the closer arm andspindle at a later date.

8. Secure the arm to the closerspindle with the clamping block.Begin threading the bolt, attachingone side of the clamping block, but donot secure and tighten it. Begininstallation of the bolt on the secondside of the clamping block. alternatethe tightening process from side toside.

CAUTION: If you secure one sidecompletely at the outset, the clampingblock will not lay flat against thesurface of the closer spindle. It willinstead pinch one side and will notdraw completely tight, only to loosenlater and cause problems.

9. Check clearances completelyaround the door, adjusting the top orbottom arms as required. Adjust thejack screws in the top arm toaccurately center the door in theopening.

10. Make sure all fasteners aresecurely tightened, then open thedoor and observe its function. Adjust

the closing speedas required. If thecloser is furnishedwith an optionalstop or hold openfunction, checkfor proper opera-tion of these fea-tures. Make anyfinal adjustmentsnecessary andinstall the covercap on the heel ofthe door.

Products thatcomply with Bar-rier Free require-m e n t s a r eavailable in all

concealed closer categories. It mustbe noted that the reduction in openingforce required for barrier freecompliance also reduces spring poweravailable for closing the door. Thisreduced spring power may not besufficient to close and latch the door inall cases. In those applications,alternative products like low energyoperators should be considered.These units provide auxiliary power toopen the door while maintaining fullclosing force.

Lynn Eisenhauer is manager,marketing communications, forDORMA Door Controls, Inc.,Reamstown, Pa, and its recentlyacquired subsidiary, American DeviceManufacturing Corp., Steeleville, Ill.Eisenhauer has been with DORMA formore than 14 years. His responsibilitiesinclude extensive technical training forsales representative and customers.


5. Typical size selector chart for overhead concealed closers.

"A"

Security Solutions Locksmith Marketing ProgramItem #SS-1

Have you always wondered how to market your company and grow your commercial accounts without spending all your time doing it? SecuritySolutions is the answer! We provide you with four different newsletters, each of which is a four page self-mailer. We show you how to personalize

the newsletters for your company, featuring your shop name, address and phone number. Four times per year you simply have your local copy shopprint the number of newsletters you need...we even advise you on how to instantly access a mailing list. Each newsletter is packed with securityinformation on services and products which you provide, and which your commercial accounts need. Just mail Security Solutions to your currentand potential commercial accounts, and watch the business roll in!

To order, or for current price information, call (630) 837-2044 of fax (630) 837-1210 and ask for item #SS-1.

The world’s largest producer ofautomotive locks and keys.

Click here for more

information

Click here for more

information


nterchangeable core (IC core)locking systems are availablefrom most of the major lockmanufacturers in America

including Best, Falcon, Schlage,Medeco, Sargent, Corbin Russwin,Yale and others. All produce their ownversion of the removable,interchangeable core lock.

However, on a day-to-day basis,probably more locksmiths encounterBest/Falcon type IC core locks thanany other type. Which isunderstandable, since there are, quitepossibly, more Best/Falconinterchangeable core locks in use,then all the other brands combined.

And, I don’t doubt that Best/Falcontype IC cores have caused morelocksmiths to lose their religion, out ofsheer frustration, then any otherlocking system currently being used. Iknow I have been driven to the pointof cutting loose with a heartfelt, “Aw!Shucks!’ occasionally while workingon a Best/ Falcon cylinder!

In this three-part series, I’m goingto try to take some of the mystery -andaggravation -out of working on, withand around Best/Falcon IC cores. I’monly going to deal with the morecommon A-2 system, and will leavethe other series and the othermanufacturers systems for later

articles.

The first thing I would like tomention is that Best/Falcon IC coresare not high-security locking systems.These locks are pickable particularlyto the control shear line, and they donot (Except Best’s new cores with thearmored collar. Which I’ll discuss in alater article) have any anti-drill pins orface plates incorporated in their

construction.

They are uniquekey control systemsthat offer the end-user good keycontrol and theability to changecylinders whennecessary in just amatter of seconds.Consequently, theyare ideal systems inareas where lockshave to be rekeyedfrequently due torapid personnelturn-over. And, theyare an excellent

system where one person isresponsible for the key security atnumerous locations.

ext, I want to mention thatBest/Falcon IC cores are notmysterious, awesome lock-ing devices that require the

skills of a CML with a Doctorate inApplied Physics to master. If you canmasterkey any lock cylinder withoutsweatin’ bullets, you can - once youunderstand what I call “The Rule ofTwenty-Three” - do anything to aBest/Falcon cylinder that you can doto a Kwikset. It just takes a littlelonger and some special tools.

True, the tolerances are closer andthe work is more exacting. And,without the proper equipment, pinningcylinders and cutting keys can be abear. But! If you want to get into ICcore servicing and sales, the work isstimulating, interesting and profitable.And, you can put yourself in the ICcore business with just a little trainingand under a grand in equipment andinventory.

January 1995 • 91

by Jake Jakubuwski

1. There are two independent shearlines possible in the Best/Falcon ICcore system.

2. An IC core with control key, change key and masterkey, plus a replacement cylinder.

Doin’

It WWITHITH BBESTEST/F/FALCONALCON

Learning the ins and outsof IC core service allows

the locksmith anothermarketable skill.

II

NN


he basic principal that governsthe operation of a Best/Falconcylinder is the fact that thecore has two shear lines. (See

illustration 1.) The primary shear line,or Operating Shearline, is for thechange key. The change key bringsthe pins to the Operating Shearlineand allows the plug to turn just like ina standard cylinder.

The secondary shear line (Calledthe Control Shear Line) is operated bythe control key and allows the core tobe removed from the cylinder body.This is accomplished when the controlpins are brought to the shearlinecreated between the top of the ControlLug and the bottom of the cylinder’supper pin chambers.

I guess I should make mention ofthe fact that each of these shearlinesare separate and distinct entities. Thatis, if you somehow pinned a plug sothat some pins chambers were alignedat one shear line, and some chambersat the other, nothing would happen!The plug would not operate. All thechambers must be lined up at eitherthe operating shearline or the controlshearline .... not any combination of

the two. (See photograph 2.)

To remove the core, just insert thecontrol key, turn it about 15° to theright and pull the core out If the coreis masterkeyed (and most are) thenyou effectively have three shear lines.However, the shearline created by themaster key is still at the plug’s normalshear line just as it would be in astandard lock cylinder.

Photograph three shows thecontrol key inserted in a core, turnedabout 15° to the right and the old coreremoved. The control key inserted inthe replacement plugs and the newcore inserted in the cylinder. That’show a core is changed in a Best/Falcon lock cylinder The entireprocess takes only a matter ofseconds.

he two “pins” or lugs at theback of the cylinder housingare what transfers the turningmotion from the core to the

cylinder’s tailpiece. (These cylindershave to be ordered with the propercam i.e., Adams Rite, Yale, etc.) A setscrew on the right of the corechamber, when it is screwed all the

way in, offers additional security toprevent the cylinder from being“wrenched” out of the lock case. (Seephotograph 4.)

In fact, if this lock cylinder isinstalled in a mortise lock properly,with the set screw extended behindthe wall of the lock case, a persontrying to wrench the cylinder out ofthe lock would most likely destroy thelock case before getting the cylinderand plug out.

Photograph five shows the retaineron a Best/Falcon style plug. This iswhat holds the core in the cylinderand it is this retainer that is projectedor withdrawn by the control key. Thecore on the left has the retainerretracted, which would allow the plugto be removed or inserted in an ICcore cylinder.

The core on the right has theretainer extended. If this core were ina cylinder housing, then it would be“captured” until the core key is usedto remove it. Note that both cores inthis photo shows two holes at theirrear. It is into these holes that thecylinder pins slide into.


4. This set screw helps prevent the lock from beingforcibly unscrewed from the lock case.

5. The locking lug is used to retain the plug in thecylinder housing. The lug of the lock on the left isretracted, allowing the plug to be installed or removedfrom the lock. The plug on the right has the locking lugin the locked position.

6. Starting top left and moving right, the CylinderHousing and a combinated core. Next comes theseparation of the Control Lug, the Core Shell and thePlug.

3. Using a control key to remove the core.

LockingLug

TT

TT


Photograph six shows aBest/Falcon cylinder with the core inprogressive disassembly.

In photograph seven, notice thesmall square notch on the undersideof the key’s tip. This tip is the “index”or “stop” when the key is inserted intothe lock. It is this notch that is used toindex the key when cutting code orduplicate keys.

ince the stop is at the tip of thekey all the cuts are read fromthe tip to the bow. That is justthe reverse of the way we read

most standard keys. When coding,decoding or preparing to code cut orduplicate a Best/Falcon key, get in thehabit of holding the key with the bowpointing to the right.

Reading the key and the lock plugin this manner will help you avoidconfusion and uncertainty whenworking with these interchangeablecore locks.

There are several differencesbetween a Best/Falcon A-2 IC coresystem and a standard lock cylinderthat you should be aware of beforeprogressing to the actual pinning of anIC core cylinder.

First, the MACS (MaximumAdjacent Cuts) safety factor on an A2core is nine! That’s it! You can have a0-8, or a 9-1 combination side-by sideand not have any problem with theoperation of the cylinder if it isproperly pinned.

The reasons are several. Unlikestandard cylinders the space betweencuts is .150” rather then the morecommon .156” used by most lockmanufacturers. Next, the IC core pindiameter is only .110” as opposed tothe typical of 115” And, the depthincrements are only .0125”.

Taken individually, none of thesedifferences are of major import; but,when added together, they allow aBest/Falcon (A2) key to be cut withvirtually any depth cut positioned nextto nearly any other - and still have aproperly functioning key and cylinder.

ext month, I’ll show you howto set up a non-computergenerated pinning chart(Courtesy of Falcon), how to

pin an IC core plug, some of theequipment you’ll need to do the work;and, where to look for this type ofprofitable lock work.

In the meantime, think about this:Interchangeable core locking systemsare suitable to nearly any type ofbusiness or industry you care toname. Office complexes to officeparks. Manufacturing concerns tomanagement companies. Conveniencestore operations to carry out foodservices. Any where there is a rapidturnover in tenants or employees ....interchangeable core locking systemscan make you money!

See y’all next month. Y’all heah!



7. The Best/Falcon key uses aunique tip stop.SS

NN


Insta Code from The National Locksmithis the premier software program in the

industry! This one software package answersall your code needs by allowing you to lookup codes easily and quickly.

Plus Insta Code allows you to create yourown code books by printing out anycomplete series you wish...you can evenprint them all! And get this! It even printsout 1200CM™ code cards for any series!

Other features include powerful searchcapabilities, search for partial bittings andprogress them, view a picture of what thecut key will look like, tells you if it is tipor shoulder stopped, runs the Unocodeand ITL machines, cross references keyblanks, and more.

Insta Code contains no hidden costs orextra charges for multiple installations.You may install the program as many times as you need to on yourown computers with no extra cost.



DaveMcOmie’sPenetrationPartyby Dave McOmie — Item #PP-1

Uncensored! • The Safes! • The Tools!• The Action! • The Perfect Openings!• The Bloopers and Blunders! • TheSlick Tricks!

No one knows safes and safecrackinglike Dave McOmie. When it comes to drillpoints, he is the master of all masters.This book takes you inside Dave’s mind,and allows you to follow his thoughtprocess as he analyzes each opening.Dave gives you his thoughts on the bestopening method, then the opening isperformed. And then Dave honestlyappraises each method and offersimprovements where he feels hisoriginal methods were less than perfect.

To order, or for current priceinformation, call (630) 837-2044 or fax(630)837-1210 and ask for item #PP-1.


The market leaderin locking systems for security,

safety, and control.


AM, ROM,TSR, High

Memory, LowMemory, Syquest,Bernoulli, CDDrive, Peripheral,M e g a b y t e ,P l a t f o r m ,Megahertz, I/Oaddress, E-Mail,Quark and more.

No, this isn’t an outline for a newDr. Suess book, nor is it unpublishedportions of Jabberwocky, or evenideas for the next episode of DeepSpace Nine. What it is, is computerjargon.

Yes, that’s right, jargon; the crypticdialog of the pseudo-genius.

Why we use it is beyond me. Oh,sure, in theory I guess it helps thosein similar careers or lines of workcommunicate more efficiently. Butwhen was the last time you saw it usedfor that purpose? In reality it seems tobe the only linguistic feat since thatTower of Babel incident wherevernacular is meant to confuse.

For instance, my car was runningrough so I brought it to a mechanic.

His diagnosis: The IAC is notfunctional because the ECM is failingto read the AFS and the OS. (Orsomething like that.)

Layman’s terms: Your car isn’tgetting enough oxygen.

Or, how about parents?Parent: Time for bed, children.Interpretation: I want to be alone so

I can eat all the Oreos.Even locksmiths use jargon.Locksmith: The deadlatch is failing

to properly engage with the retractorslide, not allowing it to totallydisengage from the strike.

Layman’s terms: Your door knob’sbroken. It will have to be replaced.

The point here is this - everyoneuses jargon to communicate.

Unfortunately, its use oftenintimidates those on the outside. Thisis especially true with the fast growingfield of computers. Alot of people don’twant to get involved with computersbecause they don’t understand themor the language used to describe themand their operation.

I have to admit, up until I joinedThe National Locksmith I remainedcomputer illiterate. I was happy doingthings - “The good ole fashioned way.”

Since then, however, I’ve begun tolearn more about computers and nowI’m equally illiterate on bothMacintosh and IBM/PC. Mycomputer illiteracy is indicated by mynew found title - Captain Crash. Beingcomputer illiterate is okay, however,I’m learning and enjoying a new tool!

And what a tool itis. I can do myb o o k k e e p i n g ,c o r r e s p o n d e n c e ,contracts, codesearches, ordering,inventory, flyers andbrochures, articlewriting and evengame playing on it.In short, the com-puter has made mymost tedious tasksfaster and easier toaccomplish. Plus,The National Lock-smith is now onlinewith America Online,allowing locksmithsfrom all over theworld to communi-cate with us directlyanytime you want.

How can you getinvolved? Simple.First, don’t let jargon(or the accompany-ing salesperson)intimidate you. Youdon’t have to be acomputer “Geek” topurchase or use a

computer.Mistakes in terminology are

normal when just starting out andshould be expected. Just make sure totake your time in choosing. Talk withseveral sales representatives fromvarious stores. Use your first few visitsto learn and be informed on what’s outthere. Learn from friends and otherlocksmiths who have computers.

Second - shop! Like calculators, thecost of computers has dropped whiletheir capabilities have grown. A typicalsystem, including a keyboard, mouse,monitor, the computer and somesoftware can often be purchased for aslow as $1000, and generally run from$1200 to $1700 depending on options.

January 1995 • 95

SSEERROOOOGGY Y SSPPEAEAKKSS

byTom Seroogy

Notes from the

Managing Editor

R


Diary of aSafeman

by C. L. CoreyItem #DIARY

This book is a real gem… the private safe diary ofold time safecracker C.L. Corey. Back in the days ofAl Capone the crooks were blowing safes withnitroglycerin and C.L. Corey was out servicing and

repairing those old safes.The book features andintroduction by DaveMcOmie.

Mr. Corey not only keptnotes on all of his jobs, healso carefullyphotographed every safehe worked on. Here instriking detail, we havereproduced this diary fromthe most exciting era insafe work, the early1930’s. You’ll see all thegreat old safes from thepast and you’ll learn howto open and repair them.



We have it all.Quality, Value,

& Service.

Make It Usable and TheyWill Buy It

The Harvard Business Review tellsus that traditional criteria for buildinga new product is not enough. The keyto the success of a new product isusability.

Making a more usable productrequires first finding out what thecustomer wants to buy and thenbuilding it. This is called “usercentered design.” In the movie, “Fieldof Dreams,” you will remember theline, “If you build it we will come.”This is an example of user centereddesign. The Hayman FS4000 safe isnot another “me too” product. Thefeatures and benefits designed intothe FS4000 are usable, what thecustomer wants and at a price thatmakes it easy to say yes.

The user centered design wasachieved by forming the body frompolyethylene - a tough thermoplasticpolymer used in automotive parts,appliances, acid storage containers,gasoline tanks and more. The use ofpolyethylene allowed us toeconomically provide storage andfiling systems. These desirablebenefits were too expensive in an allsteel safe.

Staying with the tradition ofsecurity first and with our BurglaryGuarantee at the front of our minds,we determined to build a safe thatwould meet or exceed ourexpectations. The top 4” of the safe isidentical to our FS line of in-floor safes– 1/2” x 1” steel door frame, 1/2” steelbolt support bar, solid five bolt locking

system, 1/4” steel walls, 1/4” (C-60)hardplate and reinforced dead bolt.The FS4000 was severely testedagainst 1.) pounding attack 2.) sideaccess through the concrete 3.)pulling attack and 4.) fire. The resultswere so impressive that we awardedthe FS4000 our burglary guaranteeand added fire and seepageguarantees as well. When properlyinstalled, Hayman guarantees that ifthe FS4000 is ever successfullyburglarized, or allows seepagethrough the body, or if the FS4000 orits contents suffer fire damage, we willreplace or repair the safe free.

The bottom line for the safe dealeris – if a product is priced right, builtright and backed up withmanufacturer guarantees it will sell.The FS4000 is 4,130 cubic inches yetretails for only $485. The body withthe door removed weighs only 39pounds and can easily be installed byone person. The patented hingesystem allows the door to be removedand reinstalled with no tools. TheFS4000 has burglary, fire and seepageguarantees.

The Hayman FS4000 is available

directly from the factory freight FREE.For more information contact 800-444-5434.

Key Control From MeganMarie Creations, Inc.

A new, simple and profitable, keycontrol system has been developed byMegan Marie Creations, Inc., ofMequon, Wisconsin.

The Key I.D. Kit™ which featurescolor coded vinyl labels (not paper),which can be affixed to keys for quickidentification purposes, has been testmarketed to several hundredlocksmiths; and is now being madavailable nationally.

The test marketing revealed thatthe product moves strongly at thelocksmith level with littlemerchandising help.

Rich Paetz, President and CEO ofthe company which bears hisdaughters’ name, said the kits arebeing made available on aconsignment basis to locksmiths sothey can determine their marketabilitywithout having to pre-pay for the kitsup front.

Rich said that there are currentlyfive separate kits for the locksmith tosell, including ones for home, office,vehicles, and security purposes, aswell as a “blank” kit which can becustom designed for any use.

Each peggable, resealable,clamshell container kit averages over300 pre-titled, pre-numbered or blank,color-coded, pressure sensitive,strong, adhesive backed vinyl labelswhich can be applied directly on keysor locks.

“We use the same strengthadhesive that is used on the license

TTHHRRU U TTHHE KE KEEYYHHOOLELEA Peek at

Movers & Shakers

in the Industry

ATTENTION MANUFACTURERSAND DISTRIBUTORS: Would you likeyour company and products to beprofiled in Thru The Keyhole ? Please callManaging Editor, Tom Seroogy at (708) 837-2044.


plate decals so the labels will not peeloff,” Rich said.

In addition to the pre-printed labelsfor each application area; each kitcontains a sampling of “blank” labels;thus allowing the customer tocustomize their own label, butrequires you to place a second clearlaminate label (which is included ineach kit) over whatever you print to“final seal” your selection.

Each kit also contains a speciallyformulated glow in the dark sheet ofvinyl labels designed with the mostpopular pre-printed titles and asampling of the blank applications; aswell as 12 die-cut Lock Glow Rings™,which are designed to be placedaround the customer’s home deadboltlocks, vehicle door locks, or mail boxlocks; to help us find that elusive keyhole at night or during darkness. Therings come in three sizes.

To date, the Home Key I.D. Kit hasbeen the most successful, followed insuccession by the blank, office,vehicle, and security kit.

“We feel confident that everycustomer household could use ourHome Key I.D. Kit, and that everybusiness will want, eventually use, ourOffice Key I.D. Kit, once they’reexposed to the quality of our product,“Rich said.

“The strength of the Home KeyI.D. Kit can be attributed to the impactthat the real estate market isenjoying,” Rich said.

“Real estate brokers and agents aregiving the Home Key I.D. Kit away toevery customer that buys a new orused home from them; they’rebacking this up by mailing aHome/Office Key I.D. Kit to everycustomer who has bought a home orcommercial property from them in thepast. What a great promotional tool,”Rich said.

He added that the agents areenclosing their business card on thepre-slotted package backs; so that thecustomer will remember where theygot their free kit.

“Locksmiths are already talkingwith Real Estate agents, builders, newhomeowners, and business ownersabout changing locks and keys, andthis is a logical, natural extension ofthat business,” Rich said.

An in-store promotional idea Richsays has been popular with thelocksmiths is to open one of the kits,affix the labels to some old keys, andleave them out on the counter forexposure. “The customer sees theseand wants to know more,” Rich said.

January 1995 • 97

Basic Masterkeying Courseby The National Locksmith

Item #MK113 Lesson 450 page course

The Basic Masterkeying courseis designed for the locksmithwho wishes to become proficientin Basic Masterkeying.

—Course Includes—• 13 step-by-step lessons, 12self quizzes, 4 tests, 1 midtermexam and 1 final exam.• Correctly laying out a buildingfloor plan.• Using the floor plan to create the System ExpansionSpecification and Levels of Authority.• Selecting a proper Top Master Key.• Setting up a Key Bitting Array for a Single or TwoStep System.• Using the Key Bitting Array to develop a ProgressionChart following the Standard Progression Format andthe Odometer Method.• Picking out Master Keys and assigning key numbersusing the Standard Key Coding System.


Flat RateManual

by Janice PateItem #FRM-1

Now you can easily “Price for Profit!”

Chapters allow you to price jobs in allthese categories: Domestic and foreign autos, codekeys, conversions, duplicate keys, first key or rekey,installations, key-in-knob locksets, lockouts, masterkeysystems, miscellaneous, safe and vault work and trip charges.

The Locksmith Handbookby The National LocksmithItem #LH-1

This book contains the most importantarticles published in The NationalLocksmith over the last five years. Owning

The Locksmith Handbook is like having five years worth ofback issues combined into one!

Featured articles are on: automobile opening and servicing,motorcycles, computer programs, technical tips, safe openingand service, lock picking, lock installation and service, doorclosers, impressioning, business practices, humor and more!



SRi and Steve Young are workingtogether to bring you the best in

locksmith tools and supplies.

Megan Marie Creations is offering,for a limited time, to send locksmiths20 kits (four of each type) for theirown evaluation and test marketing. Afollow-up will be done in 60 to 90 daysat which time the locksmith willdecide if he or she wants to retain theproduct line, or return the unsold kits,while paying only for what was sold.

Rich said he feels confident thatlocksmiths will be re-ordering productwithin two weeks.

The company is also offering pre-printed mailer suggestions forlocksmiths to use in businesssolicitations.

Megan Marie Creations, can becontacted at 6807 W. Kasota CT, Suite100, Mequon, WI, 53092, phone 414-242-7739; fax 414-242-1745. For re-ordering, call 800-4KEY KIT.

SLIDEGUARD, SecuritySolutions for SlidingGlass…and More

MIWA Lock U.S.A. has recentlyestablished a subsidiary corporation tomarket its growing Slideguardproduct line. MIWA Lock, long notedfor its magnetically operated highsecurity cylinders and locksets hascreated Slideguard USA, Inc. tooversee the product development,manufacturing, promotion, and salesof the Slideguard line of lockingdevices. Since MIWA locking devicesare handled only by an exclusivedealer network, management ispromoting the Slideguard line underthe name Slideguard USA, Inc. toinvite broader distribution andinterest.

Slideguards are stainless steellocks that mount directly to glass,metal, and Plexiglas without any tools.Models are also available for wood.Slideguards are available for everysliding glass window or doorapplication, and come with both threepin keyed cylinders or thumbturns.They are available KA or KD andkeyblanks are also available which canbe duplicated on standard key cuttingequipment. Each keyed model comeswith a code on the key so owners canobtain duplicate keys from thelocksmith by simply referring to thecode. Models are available with bothstraight or “Z” locking brackets for

security on many applications.Straight brackets are used onwindows and doors that have frames(like a patio door), and the “Z” type isused on frameglass. For example, adisplay case with sliding frameglass isthe perfect application for the “Z” type.The bracket not only prevents theglass door from sliding, it alsoprevents the glass panes from beingspread apart. Whatever theinstallation, you never have to worryabout breaking the glass.

Some common uses for Slideguardinclude; patio doors, double hungwindows, sliding windows, displaycases, credenzas, receptionistwindows, and sliding windows in pick-up trucks and RV’s. With imaginationyou can also install a supplementalmounting plate on a patio door orwindow so that they can be locked inan open ventilation position.

Besides the obvious market withhomeowners, some very attractivecommercial markets are available tolocksmiths. Almost every retailer hassome form of display or showcase intheir store. Hotels and motels arerequired to install auxiliary locks onsliding doors to patios and balconies.Many apartment complexes haveinadequate locks on their patio doors.

Installation is easy. Slideguards arepackaged with an adhesive and acleaner. To install, simply crush theplastic vial of cleaner and apply to boththe glass surface and the bottom ofthe mounting plate. Let stand for

about 30 seconds to dry. Apply threedrops of the adhesive on the mountingplate and place in the desired position.Apply firm pressure with your fingersand the plate will permanently bond in60 seconds.

Slideguards are available throughyour favorite distributor in either bulkpackage or in point of sale clam shellblister packs with color artwork.Complete installation instructions areprinted clearly on the package. Shopowners can profit from Slideguardwith their walk-in trade. Home andbusiness owners can install them bythemselves...without tools.

Fort Knox SecurityProducts ‘95

What do Whoopi Goldberg, JoeDiMaggio and Chuck Yeager have incommon? All three turned to anOrem, Utah, safe manufacturer toprotect their guns and other valuables.

Fort Knox Security Productsmakes the finest and most respectedhome safes in the country, accordingto those polled researching homesafes for their personal use. T.J.James, president of Fort Knox, saidnot only guns owners are becomingmore responsible in the security oftheir weapons, but homeowners areconcerned about keeping familyheirlooms, personal records, jewelryand works of art safe from burglarsand fire. In the past, our big markethas been the blue-collar sportsmanand rich gun collectors, but over thelast five years our demographics havegrown to include stamp and coincollectors as well as people that justwant their personal items... personal.Fort Knox has even built a customsafe for an insect collection worth over$37,000.

The philosophy at Fort Knox is thatthey are not in the business of sellingjust cold steel vaults. They are in thebusiness of selling peace of mind.The peace of mind you experience byknowing that your valuables are safe.Peace of mind from knowing that yoursafe was constructed from Americansteel by American craftsman.Craftsmen who take pride in qualitywork.

From the beginning, Fort Knox hasstrived to be the pioneer in


innovations to make home safesstronger, safer and harder to breakinto. The ultimate in safe security hasalways been the multiple gearmechanism such as those used inbanks and very expensive commercialsafes. While the rest of the industry isstill using cam systems, Fort Knox haspatented their own Rack and PinionGear Drive. As you spin the handletwo complete revolutions, up to 28 oneinch locking bolts move in to assure atight lock up every time. Anotherexclusive feature from Fort Knox is

their patented Star Corner Bolts. Yes,it may be overkill, but Fort Knox hasalways had a history of overkill.

The fit and finish is another thingthat Fort Knox is proud of. Only thefinest metal flake acrylic enamelautomotive paints available are used.Then the safe goes through a fourstage paint process by professionalpainters. Then it moves on to a state-of-the-art drying room where the paintis baked on.

They have found that a verypopular place for attack on any safe isthe hinge. This will only causedamage to your beautiful safe whilestill protecting your valuables. Thesolution is hiding the hinges on theinside, and centering the dials on mostof the safes to make it difficult to tellwhere the hinges are, or which waythe door is going to open. This stillallows the door to open a full 100degrees for full access inside, yetstops the heavy door from banging upwalls and furniture.

Fort Knox has also gone to theadded expense of testing and

certifying their fire protection. No,they are not yet fire proof, howeverthey will keep the inside temperatureof the safe under 350 degrees withoutside temperatures exceeding 1200degrees. This should give more thanenough protection in the event of afire.

In keeping with the tradition ofoverkill, Fort Knox offers still moreinnovation for ‘95. With ball bearingsin the hardplate and drill deflectorsprotecting the locking bolts. Thismakes the lock and lockingmechanism virtually drill proof. Thisyear Fort Knox also carries theuncompromising approval fromUnderwriters Laboratory. The listingis under Residential SecurityContainer or Gun Safe and very fewhave achieved this listing.

With more than 14 models tochoose from and modular interiorsthat can change with your needs, FortKnox can meet your needs. This,along with an unequaled LifetimeWarranty makes Fort Knox“America’s Best.” Even for thingsbeyond their control, like burglary,fire or a burglary attempt whether

January 1995 • 99

Revised GMSteering


Item #GM-2

Here’s what the course contains: • Comes complete

with take-home test so you can become certified on

GM steering column service! • Authoritative training on

every domestic GM column from 1967 to 1995. •

Includes the collapsing GM steering shaft, avoid the $165 GM 10-cut mistake, A to Z

airbags, square columns made easy, Alpha Tech Service without fear, the truth about

VATS variable timing and more. • Written and photographed by 24 year GM Master

Technician, Tom Mazzone, and 10 year Auto Locksmith Expert, Tom Seroogy. • In-depth

information drawn from actual field experience. • Large clear photos highlight commonly

found problem areas and take you step by step for clear, easy and concise service

procedures. • Dangers & Warning section alerts you to costly and time consuming

problems before you start. • A tool guide shows exactly what tolls are necessary for


GM’s newest and hottest columns and security systems are fully exposed and revealed in

easy step-by-step instructions in this latest steering column service update. • An easy to

follow, in-depth service update, based on GM’s own Service Technology Group training as

offered only to GM certified technicians. • Complete Buick Park Avenue PASS-Key III

transponder system diagnostics and service. • Avoid the Passlock I (MRD) programming

mistakes that other manuals don’t reveal. • Passlock I (MRD) and PASS-Key III service

short-cuts that really work! • First service and programming procedures for GM’s newest

electronic security — the PASS-Key III transponder system. •Brand new Security System

Section explores the concepts and theories that make GM’s newest electronic security

systems possible. • Passlock vehicle dash disassembly displayed in four easy to follow steps.

• Complete with over 50 large, detailed photographs and graphics.

To order call (630) 837-2044 or fax (630) 837 1210.

Foreign &Domestic

AutoService

by Michael HydeItem #FDAS-1

This book representsthe best work ofAutomotiveLocksmithing guruMichael Hyde, authorof the famousAutoSmart. In this300+ page collection,you get assembled inone place the bestarticles and automotiveprocedures everproduced. Hundreds ofphotos lead youthrough step-by-steplocksmith service on

the most challenging cars on the road. All the cars covered are recent models.

In this one book, you have every detail you need to know, including excellentphotos, about common and difficult to service cars. This book will save you hours oftime, and help you make big profits.

To order, or for current price information, call (630) 837-2044 or fax (630) 837-1210

and ask for item #FDAS-1.

National Auto Lock Service, Inc. offers awide range of equipment and servicesfor the Automotive Locksmith. Fromtools and hard to find key blanks to

transponder programming, we can takethe mystery out of car service. We

accept credit card orders, and can shipCOD. Contact us for the latest in

automotive technology.


The Innovation YouExpect, with the

Flexibility You Need!


they get in or not, Fort Knox willrepair or replace the safe with only apolice report and pre-paid freight. Ofcourse, Fort Knox asks you not to taketheir word for it... just give them anhonest comparison and you too willfind the best dollar value in Fort Knox.For more information call 800-821-5216.

Automatic Gate SupplyCompany

In automatic gate openers we mustrecognize that horsepower does notopen gates, torque does. Torque ishow hard the output sprocket pulls onthe chain. It’s true, of course, thathorsepower and torque are related.Multiply how hard you pull on thatchain to how fast you are pulling andyou have horsepower.

It is important because only 1/10horsepower is needed to move thegate one foot a second. The 1/10 HPwould pull the gate with force of about120 pounds, and that is enough foralmost any gate that is equipped withwheels and track that are in goodcondition.

The catch is that 120 pounds is onlygood at the rated RPM on all motors.That’s why we have a clutch and fouror five gears on a car. The gas motorhas very little torque at low speedswhen we start moving.

The AC motors used on gateoperators are not much better. The1/10 horsepower rating could not getthe gate started, not even slowly. Lowspeed torque is just not there. That’swhy AC motors rated at 1/2horsepower are needed. Again, weneed to have that low speed torque.The DC motor delivers the torque atthe start. Even that hypothetical motorof 1/10 horsepower would start outwith 120 pounds of pull on the gate,that should be enough.

Look at it a little differently, a 1/2horsepower DC motor that’s when it isneeded. After it gets up to speed whatis needed is a brake to stop it. The DCmotor gives us this for free. That’s oneof the reasons the people that maketrain locomotives quit using steamengines and started making dieselelectric......that electric part is a DCmotor. Talk about something thattakes a lot of torque to get moving, try

a train of freight cars. Need we saymore?

By: Joe BricknerAutomatic Gate Supply Company16521 Saticoy StreetVan Nuys, CA 91406


WaferLock

Readingby Robert SievekingItem #WLR-1

• Easy to learn. • Faster and safer thanimpressioning. • No Codes needed • Easy to learnprinciples will have you reading locks fast. • Makekeys for foreign auto without codes, disassembly or

impression. • Reading wafer locks is one of thespecial skills every locksmith should master.

To order, or for current price, call (630) 837-2044 or fax (630) 837-1210 and

ask for item #WLR-1.To order, or for current price,

call (630) 837-2044 or fax (630) 837-1210

and ask for Item #AK-1.

The Sieveking AutoKey Guide &Illustrated CrossReference

by Robert SievekingItem #AK-1

The Sieveking Auto Key Guide lists over 2,600 automotiveand motorcycle keyways, covering makes from Acura toZundapp, and listing fourteen popular key manufacturernumbers. Every listing has clear illustration of the keyway.This allows the locksmith to compare the “key-in-hand” tothe listed number. If the key blank number is not known, the“Maker” section of The Sieveking Auto Key Guide will allowhe locksmith to search through all the listed keyways for aparticular auto maker “by the illustration of the keyway”.When the correct keyway is found, you will also find all themanufacturers numbers for that keyway. The keyways arealso identified as pin or wafer, and the number of pins orwafers given. Whether the illustrated key is 6 wafer or 8wafer, 5 pin or 10 wafer, you’ll know at a glance.


Make Sargent & Greenleaf ’sComptronic locks your choice forelectronic safe locking solutions.

Y7001 1234231Y7002 1412143Y7003 1324214Y7004 1241233Y7005 2424413Y7006 4141432Y7007 4241223Y7008 1313214Y7009 2122443Y7010 1213224Y7011 3141332Y7012 3443121Y7013 1434142Y7014 3124413Y7015 2213144Y7016 1411223Y7017 4324131Y7018 1221143Y7019 3321324Y7020 1234331Y7021 2414313Y7022 4412331Y7023 1342413Y7024 3123341Y7025 4122113Y7026 2324114Y7027 3421213Y7028 1144213Y7029 1412432Y7030 2124321Y7031 1143442Y7032 3343112Y7033 3223141Y7034 2122343Y7035 4131224Y7036 3443412Y7037 1313234Y7038 2134241Y7039 4344312Y7040 4132432Y7041 3212334Y7042 1422321Y7043 1433221Y7044 1422443Y7045 1142413Y7046 3423132Y7047 2214343Y7048 4313112Y7049 4412133Y7050 2421331Y7051 3132134






January 1995 • 101

KEYCODESKia Sephia

Y7001-8000HPC 1200 CMCode Card - CF301Cutter - CW1011Stop - Shoulder

FramonCut start - .0985"Cutter - FC8445Cut to cut (cuts 1 thru 6 only) - .0985", Spacing Block #5Cut 6 to cut 7 - .118"Stop - Shoulder

.280

.260

.240

.220

Key Codes were supplied byBLACKHAWK PRODUCTS.

.0985 .196 .294 .392 .490 .588 .704


Kia SephiaY7001-8000


Y7307 3114332Y7308 2421423Y7309 2134124Y7310 1143312Y7311 2133114Y7312 2311334Y7313 3221334Y7314 3141243Y7315 1244331Y7316 2412334Y7317 1232431Y7318 1414323Y7319 4221314Y7320 4212113Y7321 2124423Y7322 4113423Y7323 4121342Y7324 3132421Y7325 4432312Y7326 4331224Y7327 2244143Y7328 4224143Y7329 4124113Y7330 1344223Y7331 2112413Y7332 1443321Y7333 4112143Y7334 2331314Y7335 1331342Y7336 2124431Y7337 1442423



Y7400 4141323Y7401 4143432Y7402 3134221Y7403 2143221Y7404 1342234Y7405 3143421Y7406 4142123Y7407 1431423Y7408 4142312Y7409 3441432Y7410 4144332Y7411 2441313Y7412 4114432Y7413 3321234Y7414 3224311Y7415 4341322Y7416 3113142Y7417 4223314Y7418 1322341Y7419 3242113Y7420 1441432Y7421 2411343Y7422 3241143Y7423 3133124Y7424 1432413Y7425 3224114Y7426 1313412Y7427 2132124Y7428 2323141Y7429 2213341Y7430 4313422Y7431 2433121Y7432 1322413Y7433 3312241Y7434 1422343Y7435 3231324Y7436 3341312Y7437 3412321Y7438 1341423Y7439 4134342Y7440 1223141Y7441 3131324Y7442 3134112Y7443 4331422Y7444 1334232Y7445 4124131Y7446 3314232Y7447 1233234Y7448 3311324Y7449 4321143Y7450 3311214Y7451 3233214Y7452 2142313Y7453 2423114Y7454 1133234Y7455 1342143Y7456 1142342Y7457 1132423Y7458 4123143Y7459 2142231Y7460 3322134Y7461 1232414Y7462 4323121Y7463 4431412Y7464 4422413Y7465 2131334Y7466 3232141




Picking&

Impressioningby Robert Sieveking

Item #PI Here is the most complete

book ever published on pickingand impressioning locks! You willhave everything you need toknow about how to open almostevery kind of lock that can bepicked. In fact, our specialillustrations make picking easy!Plus you will also learn all thereis to know about impressioningkeys. Fantastic photos teach

you how to read marks and how tomake a first key in just minutes, Hundreds ofpages and illustrations make picking andimpressioning EASY! The old timer will lovethis book for all the new tips he’ll find. Andthe beginner will soon find that he is

picking and impressioning like he’sbeen in the business for years!

To place an order or get

current pricing, call

(630) 837-2044.Click here for more informationClick here for more information

Free freight!!

No middle man!!


Kia SephiaY7001-8000







Y7936 4241332Y7937 4414112Y7938 3133214Y7939 2413432Y7940 1242331Y7941 2313224Y7942 2413342Y7943 1124143Y7944 2232314Y7945 1233114Y7946 1443231Y7947 2211413Y7948 1124343Y7949 4322131Y7950 4114233Y7951 3113124Y7952 3114243Y7953 2213431Y7954 4411232Y7955 3441213Y7956 4413342Y7957 4134412Y7958 1213134Y7959 4124223Y7960 4113312Y7961 1423231Y7962 4434112Y7963 2341213Y7964 3442131Y7965 2134342Y7966 4214313Y7967 4123213Y7968 4334121Y7969 1132334Y7970 2141343Y7971 1414342Y7972 4311423Y7973 4414223Y7974 2113134Y7975 4211343Y7976 1214343Y7977 4413142Y7978 4331241Y7979 1142143Y7980 2113424Y7981 2441423Y7982 3123114Y7983 2231431Y7984 4313132Y7985 4421243Y7986 4424213Y7987 4143213Y7988 3241231Y7989 2143213Y7990 4134322Y7991 3431442Y7992 3321441Y7993 2312241Y7994 1414213Y7995 2144312Y7996 2143124Y7997 3133142Y7998 4221341Y7999 4121233Y8000 1423413



FROM

PROBLEM

TO PROFIT

ormally left up to the customer who purchases apadlock at a local hardware store, fence gates andlocks are typically only a passing thought for most

locksmiths. In fact, except for offering a few of our own chainsand locks, most of us view fence locks as a problem child –always wanting attention, but not worth the time.

Yet, in September 1994’s ASIS issue of The NationalLocksmith, we introduced a fence gate lock that was not onlyeffective but also inexpensive and easy to install. Today weare going to cover these fence locks manufactured byInternational Locking Devices more thoroughly.

Before looking at the locks, however, let’s take a goodclose look at the typical residential chain link fence. It is herethat the parameters for the installation are set; these includethe fence gate diameter, the fence post diameter and thedistance between the fence gate and the fence post.

Typically, the frame for the fence gate consists of postscoming in one of three diameters – 1-3/8”, 1-5/8” and 2”. Thisdimension is critical to the size clamp or gate collar needed byan ILD lock for mounting to the gate. Residential gatestypically use the 1-3/8” or 1-5/8” gate diameters, while

commercial applications use the heavier 2” diameter gatediameter.

The fence post that serves as the “strike” side of thislocking system is usually 2” to 2-1/2” for residentialapplications and 2-1/2” to 3” for commercial applications.This dimension will determine the proper fork size on theILD lock.

The final measurement is the distance between thefence gate and the fence post. Once the lock is attached theclearance between these two positions needs to be wideenough to allow the fence gate to swing freely through theopening as well as allow the fork to drop or swing intoposition for locking. (See illustration 1.)

Unlike the other dimensions, the fence gate/fence postclearance can change and is adjustable. Incorrectlyinstalled fence posts, drastic weather changes and otheroutside influences can shift and move fence posts bothdramatically and in a very short period of time. While

International Locking Devices offers options for locking chain link fence gates.

by Tom Seroogy

January 1994 • 107

Continued on page 110A B C

1. The only specifications that effect lock installationare the fence gate diameter (A), fence post diameter (C)and clearance dimensions (B). Of these, the clearancebetween the fence gate and the fence post can beadjusted.

NN

Revised GMSteering


Item #GM-2

Here’s what the course contains: • Comes complete

with take-home test so you can become certified on

GM steering column service! • Authoritative training on

every domestic GM column from 1967 to 1995. •

Includes the collapsing GM steering shaft, avoid the $165 GM 10-cut mistake, A to Z

airbags, square columns made easy, Alpha Tech Service without fear, the truth about

VATS variable timing and more. • Written and photographed by 24 year GM Master

Technician, Tom Mazzone, and 10 year Auto Locksmith Expert, Tom Seroogy. • In-depth

information drawn from actual field experience. • Large clear photos highlight commonly

found problem areas and take you step by step for clear, easy and concise service

procedures. • Dangers & Warning section alerts you to costly and time consuming

problems before you start. • A tool guide shows exactly what tolls are necessary for


GM’s newest and hottest columns and security systems are fully exposed and revealed in

easy step-by-step instructions in this latest steering column service update. • An easy to

follow, in-depth service update, based on GM’s own Service Technology Group training as

offered only to GM certified technicians. • Complete Buick Park Avenue PASS-Key III

transponder system diagnostics and service. • Avoid the Passlock I (MRD) programming

mistakes that other manuals don’t reveal. • Passlock I (MRD) and PASS-Key III service

short-cuts that really work! • First service and programming procedures for GM’s newest

electronic security — the PASS-Key III transponder system. •Brand new Security System

Section explores the concepts and theories that make GM’s newest electronic security

systems possible. • Passlock vehicle dash disassembly displayed in four easy to follow steps.

• Complete with over 50 large, detailed photographs and graphics.

To order call (630) 837-2044 or fax (630) 837 1210.


Providing quality tools,

parts, and service for the

security professional.


fences that havebeen installed pro-fessionally and cor-r e c t l y a r e l e s ss u s c e p t i b l e t om o v e m e n t f r o me n v i r o n m e n t a lchanges, movementand a change inclearance shoulda l w a y s b e aconcern.

Fortunately, the clearance can bea d j u s t e d b y l o o s e n i n g a n drepositioning the fence gate hingesand fence gate. This is simplyaccomplished by loosening the hingebolts and rotating the hinges to pullthe gate back. The only unfortunateaspect to this adjustment procedure isthat it often brings the gate and its

h i n g e s o u t o falignment with thefence line. In mostcases, however, thisis only a matter ofaesthetics.

F o r k n o w i n gw h a t l o c k t opurchase (or keep instock) the fence gatediameter de-terminesthe clamp or gatecollar size needed bythe lock and thefence post diameterdeter-mines the sizeof the fork. ILDoffers a variety ofc o n f i - g u r a t i o n sbetween collar andfork size, althoughtheir deadbolt andpush button lock willaccommodate a ma-jority of the resi-dential and com-




7. Remove the six screws from theback plate.

8. The inside of this unit is nothingmore than a slightly modifieddouble cylinder deadbolt (hencethe name).

2. The Quick Lock Push Button Gate Lock.

3. Place the push button lock upto the gate and fasten with thefour carriage bolts.

4. Tighten the set screws on thesides of the collars. 5. The installed Push Button lock.

6. The Double Cylinder Deadbolt Gate Lock.

9. When the bolt is retracted the fork can freely swing.10. When the bolt is extended it blocks the fork fromswinging.

No Bolt

Bolt


mercial applicationswe normally run into.

With the dimen-sions in hand, thereare three lockstyles that ILDoffers – the QuickLock Push ButtonGate Lock ($13.95),the Double Cylin-der Deadbolt GateLock ($28.95) andthe Automatic/SelfLocking Gate Lock($49.95).

The simplest and least expensive ofthe three is the Quick Lock PushButton Lock which consists of twocollars and two push button locks (onefrom each side). (See photograph 2.)The key for this lock is tubular orbarrel in style and has a notch nearthe tip. There are no tumblers orshearlines with this lock. The key isinserted into the keyway and turned.The notch in the key latches onto apost in the lock. The key and plug arethen pulled out to unlock.

To install, the unit is held to thefence gate at the desired height andclamped using the four carriage boltsprovided. (See photograph 3.) Finally,tighten the small set screws on theside of each lock gate collar. (Seephotograph 4.) Voila, it’s done. (Seephotograph 5.)

The next model, and probably thelocksmiths’ favorite, is the DoubleCylinder Deadbolt unit. (Seephotograph 6.) This lock is moreversatile than the previous lock in thatit uses a pin tumbler lock cylinder andkey. Actually, the unit incorporates aslightly modified imported deadboltutilizing a generic Kwikset stylekeyway.

With some experimentation andslight modifications, other deadboltunits may be able to be employed,allowing keying into the customer’skey system.

For a look inside, remove the sixscrews holding the back cover to thelock body. Two of the screws are inclose proximity to one another andtowards the center of the lock. Thesescrews are attached to the fork lockassembly. (See photograph 7.)

With the back cover removed, allthe components are clearly seen. (See



12. Holding the unit up to the gate, install the carriagebolts.

Auto Service. Get the Edge!• Over 400 pages of

automotive locksmith serviceinformation, covering an incredibly

wide range of cars and serviceprocedures. Comes in a 3-ring binder. •

High Security cars such as Lexus, BMW andMercedes. • Domestic cars, including columns

and airbags, VATS, PATS, and MATS. •Full service for popular foreign cars byvarious manufacturers. • Disassemblyfor ignition, glove box trunk and doorlocks, plus code locations. • Key blankinformation plus car openinginstructions. • Hundreds of hugephotos showing step-by-step service.

NOTE: The Automotive EDGEcontains a compilation of NLAAmaterials. NLAA members arealready in possession of these

materials.

To order or for current price information call (630) 837-2044 orfax (630) 837-1210 and ask for item #AE-1.

The

Automotive Ed

ge

by The

National L

ocksm

ith

11. Place the correct gate collars into the back of thelock.


HPC has it all:Key Machines, Software, Books, Car

Openers, Pick Sets, Tools, DoorGuards, and Key Cabinets


photograph 8.) Using tamper resistantscrews the two cylinders are mountedlike any other deadbolt less thecollars. The faceplate of the bolt wasmodified to fit into the fork lockassembly. In the unlocked position,the bolt is retracted, allowing freemovement of the fork. (See photograph9.) When locked, the bolt extends intothe path of the fork and prevents thefork from moving. (See photograph 10.)

To rekey the cylinders it is notnecessary to disassemble the unit.

Remove the tamper resistant screwsand service like a normal doublecylinder deadbolt.

This particular lock comes withthree sets of gate collars for thedifferent diameter fence gates. Choosethe set of collars to fit the fence gateand position them in the back of thelock body. (See photograph 11.)

Hold the lock up to the fence gateand install the carriage bolts supplied

with the unit. (See photograph 12.)After tightening the bolts, secure theunit by tightening the set screwsfound on the sides of the collars. (Seephotograph 13.) The job is complete.(See photograph 14.)

The final lock is the heaviest of thethree styles offered by ILD. TheAutomatic/Self Locking gate lock isdesigned for automatic latching andmeets existing pool regulations ofmost municipalities for self-locking

January 1994 • 113

February 11-12, 199518th Annual West Coast Lock Collectors Show and SaleEmbassy Suites Hotel, 211 E. Huntington Drive, Arcadia, CAContact: Bob Heilemann, c/o Ace Lock & Key, 1427 Lincoln Blvd., Santa Monica, CA90401 Evening Only Phone (310)230-3004 Message (310) 454-7295 (No Collect Calls).

February 14-16, 1995International Security Conference &Exposition West ‘95Anaheim Convention Center800 West Katella, Anaheim, CA 92802Contact: Reed Exhibition Companies383 Main Avenue, Norwalk, CT06851, Ph: (203) 840-5802.

February 18, 1995Oklahoma Master LocksmithAssociationDistributors Trade ShowGrandview Park Inn, Tulsa, OKContact: Bill Travis (918) 742-0266.

March 8-12, 1995Texas Locksmiths AssociationAnnual ConventionArlington Marriot and ConventionCenter, Arlington, TXContact: Nancy Viaille (806) 795-7117.

March 12, 1995Southern Lock and Supply Co.’sannual “Buyers Trade Show”St. Petersburg Hilton, downtown St. Petersburg, FLContact: Celeste Orr (800) 282-2837.

March 18, 1995LADC 38th Annual Awards banquetHoliday Inn - Calverton: 4095 PowderMill Road, Beltsville, MDContact: Banquet Chairman Les S.Brodsky (202) 722-0900.

March 18 & 19, 1995Greater Chicago LocksmithsAssociation10th Annual Midwest Trade ShowOlympia Plaza Hotel, 4141 CalumetAve., Hammond, IndianaContact: Kathy Zaniolo (708) 386-3334.

March 30-April 2, 1995Master Locksmiths Association of New Jersey conventionContact: Master LocksmithsAssociation of New Jersey, P.O. Box2441, Morristown, New Jersey 07962-2441.

October 6-8, 19951995 MINK Convention and Trade ShowOmaha, NEContact: Keith Delano (308) 345-6174.

IINNDDUUSSTTRRY Y MMEEEETITINNGGSSContinued on page next page

13. Tighten the set screws on the collar. 14. Test the completed installation.



15. The Automatic/Self Locking Gate Lock.16. This unique barrel style key is used to turn thelocking shaft inside the lock.

Foreign &Domestic

AutoService

by Michael HydeItem #FDAS-1

This book representsthe best work ofAutomotiveLocksmithing guruMichael Hyde, authorof the famousAutoSmart. In this300+ page collection,you get assembled inone place the bestarticles and automotiveprocedures everproduced. Hundreds ofphotos lead youthrough step-by-steplocksmith service on

the most challenging cars on the road. All the cars covered are recent models.

In this one book, you have every detail you need to know, including excellentphotos, about common and difficult to service cars. This book will save you hours oftime, and help you make big profits.

To order, or for current price information, call (630) 837-2044 or fax (630) 837-1210

and ask for item #FDAS-1.

WaferLock

Readingby Robert SievekingItem #WLR-1

• Easy to learn. • Faster and safer thanimpressioning. • No Codes needed • Easy to learnprinciples will have you reading locks fast. • Makekeys for foreign auto without codes, disassembly or

impression. • Reading wafer locks is one of thespecial skills every locksmith should master.

To order, or for current price, call (630) 837-2044 or fax (630) 837-1210 and

ask for item #WLR-1.Click here for more informationClick here for more information

Every InstallationIs a Self-Portrait

Of the Person Who Did It.Autograph Your Work with Excellence.


January 1994 • 115

gates and doors. (See photograph 15.)

The key and keyway for thissystem is unique, employing a tubularor barrel key profile. Each side of thebarrel is dimpled and fits snuglyaround the center shaft of the keyway.Like the first lock we looked at, thereare no tumblers or shearlines. Oncethe key is inserted into the lock, thetwo dimples are used to grab and turnthe lock shaft and unlock the fork.Alternate keying is not yet availablefor this lock. (See photograph 16.)

Unlike any of the other locks, thefork on this unit turns instead of dropsinto place around the fence post.

This lock does not offer replaceablefence gate diameter collars and must

be ordered to size. Make sure of thefence gate and fence post diameterbefore ordering this unit.

Like the other units, this lock isvery easy to install. Holding the unitsnugly in position on the fence gate,mark for one of the two collar holes.(See photograph 17.)

Use a 3/8” bit to drill a holethrough the diameter of the fencegate. Mount the lock to the gate usingthe provided carriage bolt and markand drill for the second hole. Installthe second carriage bolt. (Seephotograph 18.)

Being able to offer customers a

convenient form of locking their gateat a relatively low cost should opennew doors of profit for the locksmith.Most installations only take ten to 15minutes. (See photograph 19.)

With a recent sweep of swimmingpool regulations around the country,the Automatic/Self Locking Gate Lockis perfect for municipal pools, anddemands a more fitting profit.

In any case, offering these locks toyour customers is a fast, easy way toincrease the bottom line on each job!

For more information on the ILDfence locks, contact InternationalLocking Devices at 800-863-9600.

18. Use a 3/8” drill to make themounting hole.

19. The completed installation.17. Marking the mounting hole fordrilling.

To order, or for current price,

call (630) 837-2044 or fax (630) 837-1210

and ask for Item #AK-1.

The Sieveking AutoKey Guide &Illustrated CrossReference

by Robert SievekingItem #AK-1

The Sieveking Auto Key Guide lists over 2,600 automotiveand motorcycle keyways, covering makes from Acura toZundapp, and listing fourteen popular key manufacturernumbers. Every listing has clear illustration of the keyway.This allows the locksmith to compare the “key-in-hand” tothe listed number. If the key blank number is not known, the“Maker” section of The Sieveking Auto Key Guide will allowhe locksmith to search through all the listed keyways for aparticular auto maker “by the illustration of the keyway”.When the correct keyway is found, you will also find all themanufacturers numbers for that keyway. The keyways arealso identified as pin or wafer, and the number of pins orwafers given. Whether the illustrated key is 6 wafer or 8wafer, 5 pin or 10 wafer, you’ll know at a glance.

Security SolutionsLocksmith

Marketing ProgramItem #SS-1

H ave you always wondered howto market your company and

grow your commercial accountswithout spending all your time doingit? Security Solutions is the answer!We provide you with four differentnewsletters, each of which is a fourpage self-mailer. We show you how topersonalize the newsletters for yourcompany, featuring your shop name,address and phone number. Four timesper year you simply have your localcopy shop print the number ofnewsletters you need...we even adviseyou on how to instantly access amailing list. Each newsletter is packed with security information on servicesand products which you provide, and which your commercial accounts need.Just mail Security Solutions to your current and potential commercialaccounts, and watch the business roll in!

To order, or for current price information, call (630) 837-2044 of fax (630) 837-1210 and ask for item #SS-1.


ASP Covers the World of Auto Locks



GENERAL TESTContinued from page 21

4 .168”5 .138”6 .108”

(Actual dimensions read from astandard micrometer will read about.008” higher.)

MACS = 4

Medeco Biaxial architecturalhardware keys are cut with either fiveor six cuts. Fore cuts start at .213”from the shoulder, .170” cut to cut foreach fore cut thereafter. Aft cuts startat .275” from the shoulder, .170” cut tocut for each aft cut thereafter. HPC1200 users should use HPC CodeCard CSP3 or equivalent; Cutter CW-1012, and Jaw A. Framon users canuse the Biaxial Space Block and theCC-001 cutter. (See illustration 8 and9.)

Medeco Root Depth DimensionsFor Biaxial Architectural Keys

1 .264”2 .239”3 .214”

4 .189”5 .164”6 .139”

(Actual dimensions read from astandard micrometer will read about.008” higher.)

MACS is dependent upon the typeof cut and the one immediatelypreceding it.

Aft to Fore = MACS 2

Aft to Aft = MACS 3

Fore to Fore= MACS 3

Fore to Aft = MACS 4

SEROOGY SPEAKSContinued from page 95

More common now are systemsthat include the software andequipment to fax and get onlineservices (like Prodigy, Internet andAmerica Online). While the low costsystems are okay for starting out,most locksmiths start adding morememory and software once they are

familiar with its workings.Is it worth it?I haven’t had a locksmith say “No”

so far.

RULE NUMBER 45.3

Don’t ever use an issue of The National Locksmith®

to line your bird cage.

MotorcycleLock

Service

MotorcycleLock

Serviceby Shirl Schamp

Item #MLS-1

T his book contains full details on everythingthe locksmith needs to know about

motorcycle locks. It is recommended studymaterial for those who want to test theirknowledge.

To order, or for current price information, call(630) 837-2044 or fax (630) 837-1210 and

ask for item #MLS-1.

Japanese HighSecurity Auto Servicingby Michael Hyde — Item #JAP-1 Some of the most profitable cars are also thetrickiest to work on. With this new manual,however, you’ll have the experts right on the jobwith you! You get over 300 pages, and more than600 photos with step-by-step procedures on whatcan be the most difficult cars to work on whenyou don’t have the information you need. Weleave nothing to the imagination because wedocument literally every step of the work with clear photos of what you need to do toeasily make big money on the following cars: Infiniti Q45, Mazda Millenia, Lexus ES250,Lexus 300, Lexus GS300, Lexus LS400, Lexus SC300 and SC400.

Here is what you get...• How to originate keys • Ignition lock service • Door, trunk,glove box & valet switch lock service • Auto openings • Bypass trunk opening forLexus • Factory alarm bypass for Lexus • Tumbler positioning for all locks • More than600 huge, clear photos • Incredible amount of detail and step-by-step procedures •Fast Facts • Over 300 pages of information!

To order, or for current price, call (630) 837-2044 offax (630) 837-1210 and ask for item #JAP-1.

The world’s largest producer of

automotive locks and keys.


PRODUCT: Ford 10-Cut aftermarketreplacement ignition, door and trunklocks, and service kits by All-Lock.Prices dependent on lock or servicekit purchased. Available through All-Lock Distributors. (See photographbelow.)

PRODUCT DESCRIPTION: Ford10-Cut ignitions, door and trunk locks,available keyed or as an uncodedservice packages.

The A6100 Ford Side Bar ServiceKit includes tumblers, tumbler springsand tumbler caps for Ford 10-Cutsidebar ignitions.

The A6725 Ford 10-Bit (cut) servicekit, an assortment of facecaps,tailpieces or pawls and dust covers.

(The A6700 pinning kit withtumblers for 10-Cut door locks is alsoavailable, but was not included for thisreview.)

FRIENDLINESS: The friendliness ofthe Ford 10-Cut locks is achieved bythe availability of both coded anduncoded service packages in bothchrome and black versions.

At the time of this review, 18 Ford10-Cut ignitions are available (9 keyed,9 uncoded service packages), 2 doorlocks (1 keyed, 1 uncoded service kit),and 4 trunk locks (2 keyed, 2 uncodedservice packages).

FEATURES: All keyed locks comewith two look alike keys less the OEMlogo. Rubber headed keys areprovided for those locks normallysupplied with rubber heads.

An appealing alternative to thekeyed lock is the uncoded lock

package. This unit allows thelocksmith to key the lock up to thevehicle’s existing key system withoutany hassles.

The A6725 service kit offers avariety of facecaps currently used byFord, for easy rekeying and servicingof existing door locks. The commonplastic door lock pawls are also in thiskit.

The A6100 kit includes thetumblers, springs and tumbler capsfor the side bar ignitions.

All service kits have covers thatinclude an illustration and partnumber for each component in the kit,making reordering easy.

COMMENTS AND SUGGESTIONS:With the number of changes made byFord since the introduction of their 10-Cut system in 1984-1/2, theconvenience of having a ready supplyof locks and lock packages makes thelocksmith’s job much morepleasurable.

Offering keyable lock packagessaves the locksmith from worryingabout ordering several locks to matchthe overlapping ignition/doortumblers found in the original Ford10-Cut system.

The only part lacking to the Ford10-Cut line is the limited number of10-Cut door locks offered. (Accordingto All-Lock, these locks are expectedin the near future. Keep your eyesopen.)

CONCLUSION: All-Lock provides anexcellent assortment of Ford 10-Cutlocks in both coded and uncodedversions. Service components forkeying and repair are readily available.Keeping a few of these locks as well asthe service kits on hand is a sure wayto make Ford 10-Cut service easierand enhance the locksmith’s image asa prepared professional.

Taking Industry

Products for a Spin

Around the Block

All-Lock Ford 10-Cut Locks


Just a part of the All-Lock Ford 10-Cut selection.

DESCRIPTION:

All-Lock Ford 1-Cut

Locks & Service Kits.

COMMENTS:

Uncoded lock

packages are the ultimate in

Ford 10-Cut lock service.

TEST DRIVE RESULTS:

Keeping a few of these

locks and service kits on the

truck can make Ford 10-

Cut work a pleasure.


Documents

INSIDE THIS ISSUE · someone to hire them and give them exposure to the industry. What they were given while they were being paid was icing. There were probably books, catalogs and