1

Inserting one 3” Long Inserting one 3” Long Pipe Component before Pipe Component before

another Piping another Piping Component (Flg Pair).Component (Flg Pair).

Inserting one 3” Long Inserting one 3” Long Pipe Component before Pipe Component before

another Piping another Piping Component (Flg Pair).Component (Flg Pair).

www.pipingsolutions.com

TRIFLEX® Windows

2

Inserting a ComponentInserting a Component

Inserting a ComponentInserting a ComponentInserting a ComponentInserting a Component

•Inserting one 3” Long Pipe Component before another Piping Component (Flg pair)

•Using the Bottom Bar or the Dialog Bar of TRIFLEX: •Insert Ahead Arrow.

•Light Green Arrow Facing down on dialog bar.

•Insert component ahead of current component.

www.pipingsolutions.com

TRIFLEX® Windows

Inserting a ComponentInserting a Component3

Anchor

Pipe

Flange Pair

Objective is to insert a 3” segment of pipe prior to the flange pair after data point 10 and before data point

15. The new component is to be labeled 12.

Existing Pipe ComponentsExisting Pipe Components

www.pipingsolutions.com

TRIFLEX® Windows

Inserting a ComponentInserting a Component4Existing Pipe ComponentsExisting Pipe Components

Click on the Component immediately following the location at which you wish to insert the 3” segment of Pipe. This will make the Flange Pair the Current

Component.

www.pipingsolutions.com

TRIFLEX® Windows

Inserting a ComponentInserting a Component5

Click on the “Insert Ahead” of mode of input found in

the lower left corner of the dialog.

Insert Ahead

Using Insert AheadUsing Insert Ahead

www.pipingsolutions.com

TRIFLEX® Windows

Inserting a ComponentInserting a Component6

Enter the desired Delta Dimensions.

Dimensions in this case we entered 3” along the X

axis.

Click on the Pipe Icon and this

dialog will appear.

Change the To Node to 12.

Using Insert AheadUsing Insert Ahead

www.pipingsolutions.com

TRIFLEX® Windows

Inserting a ComponentInserting a Component7

When OK is clicked, the 3” section of Pipe is inserted in the model prior to the flange pair. The new component is numbered from 10 to 12 and TRIFLEX automatically renumbers the starting number of the Flange Component

to 12.

New Component

Editing Pipe ComponentsEditing Pipe Components

www.pipingsolutions.com

TRIFLEX® Windows

Inserting a ComponentInserting a Component8

For more details please contact:

6219 Brittmoore Road

Houston, Texas 77041-5114 U.S.A.

Voice: 713 849 3366

Fax: 713 849 3654

: info@pipingsolutions.com