PowerPoint Presentation
INNOVATIVE QUALITY CHEMICALSLEADING THE TECHNOLOGY IN DUST
CONTROL
Micro TechnologyCW- Dust Control PM1 is a fine particle size
(micro-emulsion) water-based co-polymer that binds matter. This
Nano technology literally controls soil particles including
microscopic sizes. Once controlled this matter forms a network of
interlinked systems with superior water resistance, compressive
strength and exceptional long term dust control. The product
adheres to the highest environmental standards and provides
solutions for soil stabilization (soil erosion), waterproofing,
tailings, slime dams, agro and dust control applications. With
different levels of CW- Dust Control PM1 various types of soil can
be stabilized ( including low levels of clay). Formation of
CONTROLLING Particles
Polymer dispersionEvaporation of the aqueous phase as an order
is imposed on the systemParticles come into contact and fill the
gap inter-particles in a process called sintering.Coalescent stage
where diffusion occurs of polymer chains between particlesMerger
involves inter-diffusion of polymer chains. This stage provides
mechanical strength of film.Controlling Soil particles
CharacteristicsHigh mechanical properties (penetration,
durability, flexibility, transit resistance, seal power)
Significantly reduces hazardous leachingEliminates erosion and
contamination of water sourcesPrevents airborne particulate matter
PM 2.5 & less Keeps hazardous material contained Removes
environmental and health risks
CW- DUST CONTROL PM1Advantages
Non-Dissipating (will not wash away with water once
cured)Biodegradable / Environmentally safeDries Transparent /
Clear/ OdourlessVegetation Safe/
Non-leachingNon-HazardousNon-ToxicNon-CorrosiveEffectiveness
Comparison CW- DUST CONTROL90%
Pine resin40%
Lignesulfonates35%
Petroleum Resin10% % Effectiveness Reducing Emission of Dust
CW- DUST CONTROL PM1Before and After
Some examples of roadstreated with CW-DUST CONTROL PM1
.
CW- Dust Control PM1The only Environmental Solution
