INNOVATIVEOUTDOORSOLUTIONS

WWW.ECCOPRODUCTS.EU

/ 2 / ECCO PRODUCTS

ECCO PRODUCTSis a Belgian developer and manufacturer of

innovative and user-friendly products with

high added value for both the private and

public sectors, and wishes to be a trendsetter

at the European level.

ECCOproducts constantly analyses the market

and is always furthering its development

of intelligent products. We keep the entire

process flow in-house (from development

to sales) and can therefore apply stringent

quality parameters ourselves.

For the distribution of our products we rely on

a selective network of dealers that market our

products all over Europe.

This commercial network is supported by

strong and innovative marketing tools.

YOUR PROJECT.OUR PRODUCTS.

04

12

18

06

14

20

10

16

22

ECCO PRODUCTS / 3 /

ECCOGRAVELSTRONG GRAVEL GRID04

12

ECCOBORDERSBETOTOP18

ECCODAL + ECCODAL HD FLEXGRASS GRIDS06

ECCOBORDERSEASYFIX LI (LINEAR) / CS (CUSTOM SHAPE)14

ECCOFENCEKIT20

ECCOMARKERSPARKING PLACE MARKER10

ECCOBORDERSMETALFLEX16

22 ECCOFENCEALUBOX

DRAINBASEARTIFICIAL GRASS GRID

/ 4 / ECCO PRODUCTS

for a functional and stable gravel surface, that is perfectly water-permeable.

Strong, frost-resistant gravel sheet in HDPE

INFO

+ Frost-resistant gravel sheet in HDPE with high compressive strength

+ Increased resistance against torsional loads due to plastic reinforcements between cells

+ Polyester geotextile: very strong, does not rot and no risk of silting up

due to the open structure

+ Very easy to use: can be transported and installed easily and fast thanks to pliable size

+ Perfectly walkable and ridable

ECCOG

RA

VEL - STRON

G G

RAVEL GRID

GRAVEL

ECCO PRODUCTS / 5 /

INSTALLATION

1. SUB-BASE

Limestone rubble, porphyry rubble or broken concrete

rubble (0-32 mm or 0-40 mm). We do not recommend

brick rubble, as this is ultimately pulverised.

2. LEVELLING LAYER

The levelling layer can consist of:

+ sieved sand

+ limestone or porphyry 2-4 mm, 1-3 mm, 0-4 mm

3. HONEYCOMB GRID

A thicker grid offers a better distribution across

the substrate.

4. SURFACE LAYER

The honeycomb structure should be just covered

with gravel (size 4-16 mm).

For finer gravels this will be approximately 1 cm, for

coarser gravels 2 cm.

TECHNICAL

DIMENSIONS SHEET 160 X 120 CM

HEIGHT 4 CM (ECCOGRAVEL 40)

3 CM (ECCOGRAVEL 30)

DIAMETER HONEYCOMB 43 MM

Density HDPE 0,95 g/cm³

MATERIAL 100% HDPE - HIGH DENSITY POLYETHYLENE

COLOUR

white, grey or black

BREAKING STRAIN UNFILLED ISO 844 -

90 TONNES/M²

BREAKING STRAIN FILLED ISO 844 -

UP TO 400 TONNES/M²

APPLICATIONS

+ Driveways

+ Parking areas

+ Garden and foot paths, terraces

+ Camping sites, ...

STRO

NG

GRA

VEL

GRI

D -

ECCO

GR

AVE

L

/ 6 / ECCO PRODUCTS

ECCOdal 50: 80 x 80 x 5 cm

ECCOdal 40: 80 x 80 x 4 cm

Frost-resistant grass grid in HDPE

INFO

+ Grass grid in HDPE: High compressive strength and high impact toughness

+ Quick installation: thanks to the handy dimensions of 80 x 80 cm

+ Perfectly accessible on foot or by car

+ European quality product

+ Expansion joints to cope with temperature differences

APPLICATIONS

+ Green car parks, driveways, carports, ...

+ Pedestrian and garden paths, camping sites, ...

+ Fire roads

ECCOD

AL - G

RASS GRID

DAL

ECCO PRODUCTS / 7 /

INSTALLATION

1. FOUNDATIONS

The foundations may consist of: lava, limestone rubble,

porphyry rubble, or crushed concrete rubble (grain

size: 16-32 mm or 20-40 mm), the voids (about 80%) are

filled with topsoil. We advise against brick rubble, as it

pulverises over time.

2. SUBSTRATE-LEVELLING LAYER

The levelling layer may consist of lava (grain size: 0-4 mm).

3. GRASS GRID ECCODAL

A thicker grid offers a better distribution across the

substrate.

4. TOP LAYER

Fill ECCOdal grass grids with substrate up to 1 cm below

the top of the grid (in this way the growth area of the

grass in the grid will be protected). Then fill the grass grid

with grass (preferably grass with long roots, eg. Festuca

arundinacea). You can work with a self-compacting

substrate, that way you do not have to brush it off

anymore, as it will be compressed in a natural way.

Every project needs an individual approach.

The instructions above are advisory.

TECHNICAL INFO

COMPOSITION - HDPE

LENGTH (CONNECTIONS EXCLUDED) - 80 CM

WIDTH (CONNECTIONS EXCLUDED) - 80 CM

HEIGHT 4 CM OR 5 CM

WEIGHT - 3,172 KG (4CM) OR 3,904 KG (5CM)

WALL THICKNESS - 0,35 - 0,40 CM

COLOUR - GREEN OR BLACK

1 grid = 0,64 m2

GRA

SS G

RID

- EC

COD

AL

/ 8 / ECCO PRODUCTS

made from recycled plastic

ECCOdal HD Flex is a solid and flexible grass grid

INFO

+ Ecological: 100% recycled and 100% recyclable

+ Unique and innovative shape for an aesthetic and uniform result after installation

+ Cell structure can perfectly accomodate all expansions

+ Thicker cell walls make the grass grids more resistant to torque

+ More than 6 strong connections per meter running between the grids

+ Large contact area at the bottom ensures better load distribution

+ Can also be placed in a half-brick connection for extra strength of the entire structure

APPLICATIONS

+ Driveways with grass and grass parkings

+ Fire roads

+ Walkways and garden paths

+ Campsites, paddocks, horse trails, ...

ECCOD

AL H

D FLEX

- SOLID

AND

FLEXIBLE G

RASSGRID

HD FLEX

ECCO PRODUCTS / 9 /

INSTALLATION

1. FOUNDATIONS

The foundations may consist of: lava, limestone rubble,

porphyry rubble, or crushed concrete rubble (grain

size: 16-32 mm or 20-40 mm), the voids (about 80%) are

filled with topsoil. We advise against brick rubble, as it

pulverises over time.

2. SUBSTRATE-LEVELLING LAYER

The levelling layer may consist of lava (grain size: 0-4 mm).

3. GRASS GRID ECCODAL

A thicker grid offers a better distribution across the

substrate.

4. TOP LAYER

Fill ECCOdal HD Flex grass grids with substrate up to

1 cm below the top of the grid (in this way the growth

area of the grass in the grid will be protected). Then

fill the grass grid with grass (preferably grass with long

roots, eg. Festuca arundinacea). You can work with a self-

compacting substrate, that way you do not have to brush

it off anymore, as it will be compressed in a natural way.

Every project needs an individual approach.

The instructions above are advisory.

SPECIFICATIONS

COMPOSITION - Polyolefines (recycled plastic)

LENGTH (connections excluded) - 78,5 cm

WIDTH (connections excluded) - 58,5 cm

HEIGHT - 4 cm

COLOUR - green with tones of grey

SOLI

D A

ND

FLE

XIB

LE G

RASS

GRI

D -

ECCO

DA

L H

D F

LEX

/ 10 / ECCO PRODUCTS

ECCOmarkers are always delivered with matching frame screw

(suitable for mounting in screed, stabilized sand or concrete).

ECCOM

AR

KER

S - PARKING

PLACE MARKER

MARKERS

The ideal solution for demarcating your parking place

The parking caps consist of a rectangular fit for use with ECCOdal.

The vertical clamping ribs ensure that the marking cap is securely

clamped.

ECCOmarkers : for use with ECCOdal

ECCOmarkers : for use with ECCOgravel

ECCO PRODUCTS / 11 /

SPECIFICATIONS ECCOGRAVEL MARKERS

DIMENSIONS

Marking cap: ø 85 mm (cover cap ø 32 mm)

Screw supplied: TX30 7.5 x 212

COLOUR white or black

Made of polypropylene carbonate (PPC).

The supplied frame screws are galvanized.

ECCOmarkers are always delivered with matching frame

screw (suitable for mounting in screed, stabilized sand or

concrete). About 8 to 10 caps per car parking lot are needed.

SPECIFICATIONS ECCODAL MARKERS

DIMENSIONS

74 mm x 74 mm (at the top)

COLOUR white

Made of polypropylene carbonate (PPC).

PARK

ING

PLA

CE M

ARKE

R - E

CCO

MA

RK

ERS

AFMETINGENMarkeerdop: ø 85 mm (afdekdopje: ø 32 mm)Bijgeleverde schroef: TX30 7,5 x 212

KLEURECCOmarkers parkeerdoppen zijn beschikbaar in wit en in zwart.

MATERIAALECCOmarkers markeerdoppen zijn gemaakt van polypropyleencarbonaat (PPC). De bijgeleverde raamschroeven zijn verzinkt.

INHOUD PAKKETECCOmarkers worden steeds geleverd met bijhorende raamschroef (geschikt voor bevestiging in chape, stabilisé of beton).

ECCOmarkers markeerdoppen worden steeds per 50 stuks verpakt. Men heeft ongeveer 8 à 10 parkeerdoppen nodig per parkeerplaats.

www.eccoproducts.eu

/ 12 / ECCO PRODUCTS

for synthetic turf projects in landscaping, roof terraces and playgrounds

Water-buffering support system

INFO

+ Optimal load distribution

+ Manufactured from HDPE material - high elasticity, even in cold temperatures

+ Water buffering capacity of 30 liters/m²

+ 9 flexible zones maintain contact with the subbase

+ Anti-skid system to ensure that the artificial turf stays nicely in place

+ Unique connection system allows the plates to shrink and expand within their own

dimensions, both during installation in cold and at warm temperatures

+ Cost efficient: avoid complex foundation works and save time and costs

APPLICATIONS

+ Artificial turf in landscaping

+ Well-suited for roof terraces

+ Playgrounds

DR

AIN

BA

SE - ARTIFICIAL GRASS G

RID

DRAINBASE

ECCO PRODUCTS / 13 /

INSTALLATION ACCESSORIES SPECIFICATIONS

COMPOSITION

100% recycled HDPE and 100% recyclable

TILE DIMENSIONS 60 X 60 cm = 0,36m²

HEIGHT - 3 cm

WEIGHT PER TILE - 917 gr // 2,55 kg per m²

WATER BUFFERING CAPACITY 30 liters/m²

COLOUR - black

ARTI

FICI

AL G

RASS

GRI

D -

DR

AIN

BA

SE

FIXING CAPSWith the specially provided fixing caps and associated

screws, the artificial grass can be fixed everywhere.

DRAINBASE BORDERSThe ECCOborders Drainbase are developed to easily

border your synthetic turf project. The border prevents

curling up of the artificial grass. The optional L-border

prevents side soil from being washed away and prevents

vermin from getting under the plates.

/ 14 / ECCO PRODUCTS

EASYFIX LI / CS

ECCOB

OR

DER

S - GARD

EN B

ORD

ERS

in galvanised steel or Corten steel for your garden projects

Simple, economic borders

INFO

+ EASYFIX LI (linear) can be used for straight lines, light curves and 90° corners

+ EASYFIX CS (custom shape) is used for any curved shape in your project

+ Fast and easy installation

+ Anchoring that can be placed randomly depending on your project.

+ Rounded top edge for maximum safety in use and during installation

+ Long anchoring pins with high impact resistance

+ Limited visibility of the mounting material after installation

ECCO PRODUCTS / 15 /

GAR

DEN

BO

RDER

S - E

CCO

BO

RD

ERS

SPECIFICATIONS

VERSIONS:

Easyfix LI (straight lines) / Easyfix CS (custom shape)

Galva 0,8 mm or Corten steel 1 mm

10 cm or 15 cm height

Easyfix LI also available powdercoated in black (on demand)

DIMENSIONS (l x w x h)

Easyfix 100 Galva: 240 x 0,08 x 10 cm

Easyfix 100 Corten: 240 x 0,10 x 10 cm

Height anchors Easyfix 100: 34 cm

Dimensions pocket 100: 12 x 9,6 cm

Easyfix 150 Galva: 240 x 0,08 x 15 cm

Easyfix 150 Corten: 240 x 0,10 x 15 cm

Height anchors Easyfix 150: 34 cm

Dimensions pocket 150: 12 x 14,6 cm

APPLICATIONS

Suitable for all areas on which no driving takes place, such as

garden path borders, terrace, flower bed and lawn borders

INSTALLATION

EASYFIX BORDER

for straight lines (LI)

as well as any curved shape (CS)

EASYFIX POCKET

Pockets are placed randomly

EASYFIX ANCHORS

Solid anchoring with long pins

/ 16 / ECCO PRODUCTS

METALFLEX

ECCOB

OR

DER

S - GARD

EN B

ORD

ERS

available in different heights

Metalflex is an L-shaped border in Galva

INFO

+ Easy-to-use

+ Fast and easy installation

+ Flexible: also suitable for corners and curves

+ Available in 4 different heights: 4,5 cm, 6 cm, 8 cm or 10 cm

+ Rounded top edge for optimal safety

+ Made from durable material

+ Perfect combination with ECCOgravel

ECCO PRODUCTS / 17 /

GAR

DEN

BO

RDER

S - E

CCO

BO

RD

ERS

SPECIFICATIONS

DIMENSIONS

Metalflex H45: 240 cm x 0,12 cm x 4,5 cm

Metalflex H60: 240 cm x 0,12 cm x 6 cm

Metalflex H80: 240 cm x 0,12 cm x 8 cm

Metalflex H100: 240 cm x 0,12 cm x 10 cm

MATERIAL: Galva

APPLICATIONS:

Can be applied on all soft and hard surfaces:

+ Asphalt

+ Loose gravel

+ Pavers

+ Bricks

+ Tiles

+ …

INSTALLATION

+ Set your project’s trace

+ bend in shape if applicable

+ Place anchoring approx. every 80 cm

ADVICE

+ For heavier loads (for example, the side

of the driveway or similar), concreting is

recommended.

+ Metalflex H45 and H60 are perfectly suited for

use in cambination with ECCOgravel. The height

of the borders matches perfectly with the height

of the grids + finishing layer, resulting in minimal

visible parts of the edging profile.

/ 18 / ECCO PRODUCTS

BETOTOP

ECCOB

OR

DER

S - GARD

EN B

ORD

ERS

in Corten steel or stainless steel for finishing concrete curbs

Quality profiles

INFO

+ For new and renovation projects

+ Long lifespan

+ Low maintenance

+ Easy installation

+ Quality profile for finishing concrete curbs

+ Aesthetic finishing

+ Concrete curb is protected

+ Irregularities in height between concrete curbs are compensated for

+ Self-locking

+ Top material quality: Stainless steel 316 or high-quality Corten steel

ECCO PRODUCTS / 19 /

GAR

DEN

BO

RDER

S - E

CCO

BO

RD

ERS

SPECIFICATIONS

AVAILABLE IN 2 MATERIAL VERSIONS:

Stainless steel 316 & Corten steel

different SHAPES and DIMENSIONS

“Wirtz” V-profile 16

U-profile 50 and 60

L-profile 60

APPLICATIONS

Suitable for all areas on which no driving takes place

+ Garden path borders

+ Pond edges

+ Terrace borders

+ Flower bed and lawn borders

Suitable for all areas on which driving takes place, such as:

+ Driveway borders

+ Parking area borders

+ Access road borders

Length Width Heigth Thickness Profile

BETOTOP WIRTZ COR-TEN200 cm top

1,6 cmbottom4 cm

7 cm 0,1 cm V-profile

BETOTOP WIRTZ INOX200 cm top

1,6 cmbottom4 cm

7 cm 0,08 cm V-profile

BETOTOP 50 COR-TEN200 cm 5 cm 6 cm 0,1 cm U-profile

BETOTOP 50 INOX200 cm 5 cm 6 cm 0,08 cm U-profile

BETOTOP 60 COR-TEN200 cm 6 cm 5,5 cm 0,1 cm U-profile

BETOTOP 60 INOX200 cm 6 cm 5,5 cm 0,08 cm U-profile

BETOTOP SPECIALOur BETOTOP Special is a new profile which perfectly suits for concrete curbs of 6 cm top width and a visible frontside

of 20 cm.

/ 20 / ECCO PRODUCTS

KIT

ECCOFEN

CE - EXCLUSIVE G

ABIO

NS

an alternative for a traditional hedge or a simple fence

Professional construction kit

INFO

+ Professional “all-in-one” construction kit

+ Easy assembly thanks to enclosed layout plan + installation video

+ Easy to customise

+ Little loss of space due to narrow width

+ Suspended installation possible

+ Subtle transition between gabions

+ Available in 4 heights

+ All nuts and bolts included

ECCO PRODUCTS / 21 /

EXCL

USI

VE G

ABIO

NS

- ECC

OFE

NCE

SPECIFICATIONS

DIMENSIONS: (l x h x w)

KIT 200: 201 x 200 x 20 cm

KIT 150: 201 x 150 x 20 cm

KIT 100: 201 x 100 x 20 cm

KIT 50: 201 x 50 x 20 cm

Length is adjustable every 5cm.

APPLICATIONS

+ Barriers

+ Terraces

+ Retaining walls

+ Publicity

+ Partition wall

ACCESSORIES

+ LED-Lighting

Energy-efficient LED lighting available to mount at the

bottom of the gabion

+ Side net for aesthetic finish

For each height a finishing piece is optionally available.

This may be used, for example, to finish the wall in a way

that leaves the stones visible on the side

+ 90° base

To create corners using the ECCOfence KIT

+ Raising supports

Especially designed to compensate for 5% differences in

heights with the ECCOfence KIT system, such as in the

case of an inclined driveway.

+ Filling

Ideal stone size between 40 mm and 100 mm, depending

on the stones’ shape. You need 0.17m³ for KIT50, 0.38m³

for KIT100, 0.59m³ for KIT 150 und 0.8m³ for KIT200.

/ 22 / ECCO PRODUCTS

ALUBOX

ECCOFEN

CE - EXCLUSIVE G

ABIO

NS

Trendy aluminium gabion

INFO

+ Professional construction kit

+ On-site assembly and filling possible

+ Easy assembly

+ Easy to customise

+ Little loss of space due to narrow width

+ Design look thanks to aluminium

+ Choice between different finishes

+ Multiple applications: benches, partitions,...

Alubox 190201 x 16,5 x 190

Alubox 140201 x 16,5 x 140

Alubox 90201 x 16,5 x 90

Alubox 40201 x 16,5 x 40

ECCO PRODUCTS / 23 /

EXCL

USI

VE G

ABIO

NS

- ECC

OFE

NCE

SPECIFICATIONS

DIMENSIONS (l x w x h)

Alubox 40 201 x 16,5 x 40 cm

Alubox 90 201 x 16,5 x 90 cm

Alubox 140 201 x 16,5 x 140 cm

Alubox 190 201 x 16,5 x 190 cm

APPLICATIONS

+ Barriers

+ Terraces

+ Publicity

+ Partition wall

+ Garden bench/garden table

(due to aluminium surface profile)

ACCESSORIES

+ If you prefer a galvanised top net instead of an

aluminium top profile, this is also possible.

+ Anchor Bolts m12: The tensile load is 2,150 kg. So

a single anchor bolt can carry a tremendous

amount of weight. Because such an anchor bolt

requires sufficient anchoring, they must always be

anchored in concrete (at least 350 kg cement/m³).

+ Ground anchor: 1 ground anchor per gabion

basket + 1 extra ground anchor for the first gabion

basket: each ground anchor has 4 M12 bolts, as

well as a floor plate and fitting slab. The advantage

of the ground anchor is that you can work with

quick-drying concrete (hardens in only 2 hours).

+ Ideal stone size between 40 mm and 90 mm. You

need 0,14 m³ filling for Alubox 40, 0,31 m³ for

Alubox 90, 0,49 m³ for Alubox 140 and 0,66 m³

for Alubox 190.

/ 24 / ECCO PRODUCTS

NOTES

ECCO PRODUCTS / 25 /

NOTES NOTES

/ 26 / ECCO PRODUCTS

NOTES

ECCO PRODUCTS / 27 /

NOTES NOTES

/ 28 / ECCO PRODUCTS© 2019/10

Ecco ProductsPoelstraat 167 - 9820 MerelbekeBelgium

COMPANYAND CONTACT INFO +32 9 247 00 25

info@eccoproducts.eu