Upload
others
View
7
Download
0
Embed Size (px)
Citation preview
FEATURES
Formed, curved moldboards for exceptional rigidity and strength (Standard Duty models)
360-degree pivoting blade with forward/reverse positions
Convenient parking stand standard
Five forward and five backfill angles, plus six offset positions (Medium Duty models)
STANDARD ANDMEDIUM DUTY
REARBLADES
Scrape, grade and level almost any playing field.
A good rear blade is like a trusty pocketknife. You never run out of uses for it. Whether you’re landscaping the yard, grading driveways or field roads, cleaning up a construction site, plowing snow or even cleaning livestock pens, you can always count on the strength and durability of these blades. Quickly and easily adjust the tilt, angle and offset to make short work of any job.
REVERSIBLE/REPLACEABLE HIGH-CARBON CUTTING EDGE
ASABE QUICK HITCH COMPATIBILITYfor faster, easier and safer hook-ups.
INNOVATIVE DESIGN AND TECHNOLOGY
GRADING & LEVELING
To learn more or to find a dealer nearest you, please visit YanmarTractor.com.
©20
16 Y
anm
ar A
mer
ica
Corp
orat
ion.
YT1
6-41
5
Yanmar has a corporate policy of continuous product improvement and development; therefore, data, specifications, and warranty are subject to change without any advance notice. There may be differences between the specifications and illustrations contained in this publication and the actual equipment. Equipment components produced by other manufacturers may be shown in photographs in this publication for the purpose of illustration only and is not intended as an endorsement of that particular equipment or its suitability. Inspect equipment before using it and be sure it is operating properly. The product depictions are not meant to be used or relied upon as a substitute for the safety and use information that is published in the respective operator’s manuals. Before operating a machine, read, understand, and follow all instructions in the manual and on the machine. Yanmar disclaims all representations, express or implied, or any liability from the use of this publication.
Yanmar Rear Blades Specifications
STANDARD DUTY
MODEL YRB54S YRB60S YRB72S
Tractor Engine HP Range up to 30 hp up to 30 hp
Tractor Hitch LImited Cat 1 and 1
Working Width (in.) 54 60 72
Approximate Weight (lbs) 144 151 162
Moldboard Height (in.) 12
Moldboard Thickness (in.) 3/16 (grade 80 steel)
Reversible Cutting Edge 3/8” x 6”
Pivot Angle Forward - 5 @ 15 degrees, Reverse - 5 @ 15 degrees
Skid Shoes Optional
ASABE Quick Hitch Compatible Yes
Parking Stand Optional
GRADING & LEVELING
STANDARD DUTY (PREMIUM)
MODEL YRB60C YRB72C YRB84C
Tractor Engine HP Range 20-45 hp
Tractor Hitch Cat 1
Working Width (in.) 60 72 84
Approximate Weight (lbs) 268 288 308
Moldboard Height (in.) 15
Moldboard Thickness (in.) 1/4 (grade 80 steel)
Reversible Cutting Edge 1/2” x 6”
Pivot Angle Forward - 5 @ 15 degrees, Reverse - 5 @ 15 degrees
Tilt up to 15 degrees
Offset up to 12” left or right
End Plates Optional
Skid Shoes Optional
ASABE Quick Hitch Compatible Yes
Parking Stand Optional
MEDIUM DUTY*
MODEL YRB720 YRB840 YRB960
Tractor Engine HP Range 30-75
Tractor Hitch Cat 1 & 2
Moldboard Length (in.) 72 83 95
Moldboard Height (in.) 18
Moldboard Thickness (in.) 0.313
Approximate Weight (lbs.) 530 565 600
Angle Forward 360 degrees, 5 forward
Angle Reverse 360 degrees, 5 reverse
Tilt 5-position, up to 30 degrees
Offset (in.) 4, 10 or 16 left or right
End Plates Optional
Skid Shoes Optional
MEDIUM DUTY**
MODEL YRB710 YRB830 YRB950 YRB830P YRB950P
Tractor PTO HP 30-65 hp 40-8
Tractor Hitch Cat 1 & 2
Working Width 71" 83" 95" 83" 95"
Moldboard Height 17" 17.5"
Moldboard Thickness 0.250" (GR80) 0.313" (GR50)
Reversible Cutting Edge Dimensions 0.5" x 6" double beveled
Weight 455 lbs. 475 lbs. 495 lbs. 705 lbs. 730 lbs.
Pivot Angle forward/reverse 7 @ 45° up to 45° (mech or hyd)
Offset 7 positions up to 18" (slides) up to 18” (mech or hyd)
Tilt 5 positions up to 23° up to 23° (mech or hyd)
End Plates optional
Skid Shoes optional
Tailwheel - optional
ASABE Quick-Hitch Compatible yes
Parking Stand standard
*Available until December 2016** Available December 2016