Upload
nguyennhu
View
219
Download
0
Embed Size (px)
Citation preview
OptiCut Highspeed Series
Innovative cross-cutting and optimisingsystems for highest yield and maximum profit
OptiCut_Highspeed_GBR 07.05.2007 9:44 Uhr Seite 1
Always a cut above with DIMTER:profitable cross-cutting with market leading know-how
With its OptiCut 450 models, DIMTER offers high-speed cross-cut
lines for all industrial requirements. For fixed length cutting, defect
removal and optimisation. OptiCut high-performance cross-cut saws
are not only the fastest around, but also give you top reliability,
accuracy and user-friendliness. Simply install and you can begin profi-
table, high-performance cross-cutting right away – thanks to the
technology leader DIMTER.
OptiCut_Highspeed_GBR 07.05.2007 9:44 Uhr Seite 2
2 3
DIMTER means state-of-the-art computer technology and software
from our own resources. One attractive option is to use scanners in
OptiCut lines instead of manual defect and quality marking. The
OptiCut can grow with the user’s needs. Upgrading and retrofitting
are possible at any stage. What’s more: DIMTER customers benefit
from the comprehensive service of an experienced manufacturer and
the security of the world-wide WEINIG GROUP. What are your
requirements? Simply select from our OptiCut range, from simple to
fully automatic solutions.
• High performance and speed• High productivity• Maximum profit• Top reliability
• Absolute cutting accuracy• Maximisation of timber yield• Easy to operate• Robust and durable
• Expandable and upgradeable• Individual cutting solutions• Use of scanner technology• Fully automatic production
Fixed length cuttingDefect cuttingOptimisation
The OptiCut – a cut above the rest:
OptiCut_Highspeed_GBR 07.05.2007 9:44 Uhr Seite 3
OptiCut_Highspeed_GBR 07.05.2007 9:44 Uhr Seite 4
4 5
DIMTER gets things moving:perfect cross-cutting in record time
High-speed positioning, cross-cutting and sorting – plus a maximum
yield. Modern plants need this facility in their production. The inno-
vative machine concept of the top models of the OptiCut 450 Series
allows feed speeds of up to 415 m/min. Exact positioning from full
speed followed by re-acceleration is performed at up to 50 m/s2. By
way of comparison: a Formula-1 racing car takes almost three times
as long just to accelerate! One cut takes just 0.085 seconds – the
blink of an eye!
Ultra-fast feed,exact positioningand precision cuttingHeavy feed rollers working from abovekeep the wood firmly in place. This ensu-res reliable, trouble-free transportationthrough the OptiCut. Even with rough,bowed or twisted timber – the drive rol-lers follow the contours of the material.DIMTER HighGrip rollers allow extremelydynamic positioning and acceleration.Powerful drive units guarantee a highcontinuous performance. The extremelyfast saw stroke ensures a very high cut-ting frequency.
OptiCut_Highspeed_GBR 07.05.2007 9:44 Uhr Seite 5
DIMTER OptiCut 450 and 450 Super:the powerpacks for universal application
The OptiCut 450 can tackle timber of almost any quality. Even bowed and twi-sted timber can be reliably used inproduction with the ample power avai-lable. Thanks to the non drive-depen-dent length measuring system, the OptiCut cuts with an accuracy of up to± 0.8 mm. Both the patented waste ga-te and a fast saw cut are standard in thehighspeed version of the OptiCut 450Super and VarioSpeed infeed. Also in-cluded is a full optimisation facility forderiving the maximum yield from a mi-nimum material input – and that goesfor larger cross sections too.
DIMTER OptiCut 450 Quantum and OptiCut 450 FJ+:the fastest OptiCut in the world
The OptiCut 450 Quantum is the ulti-mate cross-cut saw, enabling you to in-crease your daily output by up to 30 % !Besides its cleverly designed VarioSpeedfeed system, it also has an intelligentlycontrolled waste gate which onlyopens as far as needed. HighGrip rollersspecially designed for and adapted todifferent types of wood ensure effectivepower transmission to the workpieceand precise positioning - assisted by thenon drive-dependent length measuringsystem. The special saw unit can be pre-cisely controlled (e.g. minimising of tear-out). Linking of multiple saws and inte-gration of the lines into a companynetwork can be readily implemented.
OptiCut_Highspeed_GBR 07.05.2007 9:44 Uhr Seite 6
6 7
DIMTER OptiCut 450 XL:high performance – even with extra-large cross sections
The OptiCut 450 XL is equipped withextra-wide feed rollers which bring ahigher torque to bear on heavy timbersections. Despite the large cross sec-tions, a surprisingly high cutting capacityand linear accuracy are achieved. Thefeed speed can be switched between120 m/min. and 180 m/min. dependingon the relevant cross section. Andsuitable feed, marking and sorting solu-tions are of course also available for theOptiCut 450 XL – including onesspecially designed for heavy timber.
The OptiCut 450 FJ+ is characterised bya special feed system which ensures se-cure transportation of even the shortestpieces of quality wood. Thus, the machi-ne retains full control at the end of theboard over short parts up to 110 mm,that are reliably separated from the wa-ste and transferred to the sorting station.This results in a hugely increased yield incase of finger jointing operation. Thanksto their outstanding performance, OptiCut high-speed saws are ideal foruse with automatic feed systems, scan-ners as well as the OptiCut Stacker. TheDIMTER project planning team helps youplan your cutting lines, whether it is lin-ked machines, unmanned production orhigh-performance installations you’re after.
Integration of scanner technologyAutomatic sortingOptiCut Stacker: Automatic stacking
OptiCut_Highspeed_GBR 07.05.2007 9:44 Uhr Seite 7
320.000
280.000
240.000
200.000
160.000
120.000
80.000
40.000
2.000 4.000 6.000 8.000 10.000 12.000 14.000 16.000
Profit in euros per annum
m3 per year
100 euros per m3
300 euros per m3
600 euros per m3
Wood price per m3
The OptiCut optimisation function:more profit and greater transparency
Fixed length cutting, defect removal, optimisation – optimisationcan easily save a good 8 % or more waste. The OptiCut thereforepays for itself in next to no time. The diagram shows the extraprofit achieved by an 8 % waste reduction.
OptiCut cross-cut saws can be control-led via the intuitive OptiCom Directtouchscreen. This software provides foroptimum timber yield and thus formaximum profit. This future-orientedsolution can be integrated in companynetworks and keeps production stati-stics for greater transparency in woodpurchasing and production output.
Further advantages: Reliable operationwithout hard disk • Secure storage onFlash card • Direct printer connection• Can be directly integrated in Ethernetnetworks • Easy generation of cut listsand statistics evaluation in the office• Ideal solution for linking managementand production • Possibility of integra-tion into sector solutions
OptiCut_Highspeed_GBR 07.05.2007 9:44 Uhr Seite 8
8 9
Perfect sorting:fully automatic with the patented waste gate
Clearing the way for accepted stock! When sorting at extremely
high cutting speeds, it is particularly important to ensure the reliable
separation of quality wood and rejects. That’s why DIMTER high-
performance saws are equipped with a waste gate as standard.
Automatic sortingThe OptiCut cuts at record speed. And itidentifies every cut length. Sorting partsautomatically by length, quality etc.from the outset is a logical way of doingthings, particularly when it comes to order-based production. That way yousimplify your logistics and save on per-sonnel.
The patented waste gateThe intelligently controlled waste gate is integrated directly in the saw and isprecisely adjusted to the output of thehigh-speed cross-cut saws. This ensuresreliable separation of rejects from piecesof quality timber and avoids problemswith sorting and further processing.Quality timber is not considered as waste. The surest solution around forreliable sorting and trouble-free produc-tion.
OptiCut_Highspeed_GBR 07.05.2007 9:44 Uhr Seite 9
DIMTER length measuring system:even better positioning and yield
The saw stroke is controlled. Due to thecontrolled exit of the saw blade fromthe workpiece the tear-out is reduced toa minimum. The other cutting phaseson the other hand are performance-optimised. Waste or grades in whichtearout is less of a problem can be cutat maximum speed.
OptiCut with intelligent saw blade control:clean cut and minimal tear-out
The length measuring technique usedby DIMTER measures – regardless of slip - directly on the workpiece surface.This ensures the right conditions foraccurate cross-cutting: The beginningand end of the wood, the position ofthe marked defects and quality areasare recorded with great precision. Theresult: Less waste thanks to shorter cut-offs at either end. Exact lengths (upto ± 0.8 mm) thanks to assisted positio-ning. Perfect lengths without defects.
OptiCut_Highspeed_GBR 07.05.2007 9:44 Uhr Seite 10
10 11
OptiCut with VarioSpeed:continuous cross-cutting thanks to non-stop feed
Heavy feed rollers working from aboveensure reliable, trouble-free transporta-tion through the OptiCut. Differentwood qualities impose different require-ments, however. That’s why DIMTER offers feed rollers with the right surfacefinish for every application. These canbe swapped in and out of the OptiCuthigh-speed saws in no time – just liketyres on a Formula 1 racing car. Nowrough and planed qualities can be easilyhandled in the same shift. Resin-coatedrollers are easy to clean – for a consi-stently high performance day in, dayout.
DIMTER feed rollers with sure grip:top performance with all kinds of wood
Why pay out for more saws than you need? The OptiCut offers enor-mous performance potential right across the board. To exploit this capa-city to the full, the intelligently controlled VarioSpeed reduces the distances between the workpieces as much as possible. That way theOptiCut is supplied continuously with wood, making the system evenmore economic.
OptiCut_Highspeed_GBR 07.05.2007 9:44 Uhr Seite 11
OptiCut 450
DIMTER high-speed cutting lines:advanced technology with great potential
DIMTER OptiCut cutting lines are built on modular principles, thus
ensuring that you are well equipped for the future. With the relevant
upgrades, you can ensure a rapid response to changing market
requirements. Useful add-ons include scanner systems, ID technolo-
gies or the stacking device OptiCut Stacker.
Scanner systems detect fully automati-cally and at lightning speed relevantworkpiece characteristics such as knots,cracks and structural patterns, and sup-ply up to 4 OptiCut high-performancesaws with cutting data via intelligentmechanisations while maintaining fullproduction speed.
Inkjet printers or paint sprayers alloweasy, unambiguous identification ofparts and material grades. This makesfor simpler logistics, particularly whenproducing a wide variety of parts. Thecontrol of the printer is fully integratedinto the OptiCom Direct control systemof the OptiCut, so that the data forprinting can be easily entered via thetouchscreen.
The OptiCut Stacker is the ideal solutionfor the production of preferred lengths.These are stacked fully automatically toa stacking height of 1,200 mm and at arate of up to 80 parts/min. Differentstacking patterns can be selected in thesaw control system.
OptiCut_Highspeed_GBR 07.05.2007 9:44 Uhr Seite 12
12 13OptiCut 450 XL OptiCut 450 Quantum
OptiCut Highspeed Series
StandardTechnical changes reserved. The information and illustrations in this brochure also include extras which are not part of the standard package. Protective coverings may have been removed for purposes of photography. Option
The figures provided are standard values for guidance only. Please ask us if you have other requirements. Different values may apply to different versions. ( ) = optional.
Technical data:
Min. nominal cross section
Min. ingoing lengths from
Min. ingoing lengths with automatic feed from
Max. ingoing lengths
Max. feed speed
Cutting accuracy up to 1 m cutting length
Cutting accuracy up to 2.5 m cutting length
Min. cutting length / at end of workpiece
Equipment:
VarioSpeed
Servo saw stroke
Fixed length cutting / defect removal
Full optimisation of max. ingoing length:fixed and variable lengths, up to 8 qualities, 16 groups, >100,000 lengths
Patented pneumatic waste gate
Patented high-performance waste gate
Automatic sorting
Automatic feed
Integration in systems
Integration of scanner
30 x 12 mm
500 mm
900 mm
6.3 m
300 – 415 m/min (450 XL 180 m/min)
± 0.8 mm
± 1.5 mm
110 – 150 mm /110 – 180 mm
OptiCut 450
––
––
450 XL
––
––
––
450 Super/Quantum/FJ+
––
Table OptiCut 450:standards and options
The matrix shows the main distinctive features of the different models. Your DIMTERexpert will gladly provide you with further details adapted to your individual require-ments.
Attention! When determining a possible timbercross-section, bends and different timber dimensionsmust be taken into account. The nominal values inour technical data apply.
OptiCut_Highspeed_GBR 07.05.2007 9:44 Uhr Seite 13
You can expect a lot from us:WEINIG GROUP – Your partner for the future
TrainingWe want to ensure you get the maximumbenefit from your investment as fast aspossible. World-class WEINIG trainingtakes care of that. Effective operatortraining classes taught by experiencedWEINIG experts make sure that the machine will be fully productive withinthe shortest time frame.
The WEINIG ExpoCentersIn our ExpoCenters we can demonstrateto you how our top technology can be-nefit your operation. Here you can get aclose-up view of all our machines.
KaizenWEINIG's own manufacturing process is successfully organized according tothe Kaizen method. In a continuous improvement process, quality and efficiency are increased step by step.You can benefit from this at your plant.We will gladly pass on to you our manyyears of experience.
ServiceWith sales and service companies loca-ted on all continents and a large, mobileteam of service technicians, we guaran-tee a worldwide standard of service thatis unique in the industry. Fastest spareparts delivery everywhere and employeeswho speak your language are part ofour reputation for the finest customersupport anywhere.
You can concentrate on your business, let us do everything else!
The WEINIG GROUP is not only the leading manufacturer for the
solid wood processing industry, we lead this industry in technology
and ideas! WEINIG offers comprehensive services and system
solutions – all the way to complete turnkey production plants –
making the WEINIG GROUP the all-around ideal partner where the
focus is always on flexible, profitable production.
OptiCut_Highspeed_GBR 07.05.2007 9:44 Uhr Seite 14
14 15
The WEINIG GROUP:We seamlessly combine all components of solid wood processing
A strong teamEvery member of the WEINIG GROUP isa leader in their product specialty. Thiscreates valuable synergy that ultimatelybenefits you and your business.
Including full turn-key productionplantsTo build innovative machines is onething, to offer system solutions is some-thing else. More and more, our custo-mers want the entire factory. That’s acase for our team at WEINIG CONCEPT.Here the competence of the WEINIGGROUP combines in a special way. Fromplanning to the turn-key productionplant, our professionals handle it all.Worldwide. For you.
WEINIGWorld market leader
for moulders
WACONo. 1 for high-speed
moulders and planers
GRECONHigh-performance finger
jointing lines
DIMTERSpecialist for optimizing
cross-cut saws and gluing
presses
RAIMANNTop technology for
rip optimization
CONCEPTYour competent partner
for complete system
solutions
OptiCut_Highspeed_GBR 07.05.2007 9:44 Uhr Seite 15
0507
/ST/
2000
/GBR
Production:GRECON DIMTER HolzoptimierungSüd GmbH & Co.KGRudolf-Diesel-Strasse 14 –1689257 IllertissenGermany
Phone +49 (0) 73 03 / 15-0Telefax +49 (0) 73 03 / 15-1 99E-mail [email protected] www.weinig.com
Sales:WEINIG GROUPWeinigstrasse 2/497941 TauberbischofsheimGermany
Phone +49 (0) 93 41 / 86-0Telefax +49 (0) 93 41 / 70 80E-mail [email protected] www.weinig.com
OptiCut Highspeed Series
OptiCut_Highspeed_GBR 07.05.2007 9:44 Uhr Seite 16